TÜV Rheinland Nederland B.V.
Head Office:
Westervoortsedijk 73
NL-6827 AV Arnhem
P.O. Box 2220
NL-6802 CE Arnhem
The Netherlands
Location Leek:
Eiberkamp 10
NL-9351 VT Leek
P.O. Box 37
NL-9350 AA Leek
The Netherlands
info@nl.tuv.com
www.tuv.com/nl
Tel. +31 (0)88 888 7 888
Fax +31 (0)88 888 7 879
TÜV Rheinland Nederland B.V. is a
registered company at the
Netherlands Chamber of Commerce
(KVK), under number 27288788.
VAT number: NL815820380B01
IBAN: NL61DEUT0265155096
Version
2021-04
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Certification Report
TnD v5.1 on ID-One Cosmo X (PACE/EAC1/Polymorphic
eMRTD/LDS2 configuration)
Sponsor and developer: IDEMIA
2 place Samuel de Champlain
92400 Courbevoie
France
Evaluation facility: Brightsight B.V.
Brassersplein 2
2612 CT Delft
The Netherlands
Report number: NSCIB-CC-0362721-CR
Report version: 1
Project number: 0362721
Author(s): Andy Brown
Date: 26 August 2021
Number of pages: 14
Number of appendices: 0
Reproduction of this report is authorised only if the report is reproduced in its entirety.
Page: 2/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
CONTENTS
Foreword 3
Recognition of the Certificate 4
International recognition 4
European recognition 4
1 Executive Summary 5
2 Certification Results 7
2.1 Identification of Target of Evaluation 7
2.2 Security Policy 7
2.3 Assumptions and Clarification of Scope 8
2.3.1 Assumptions 8
2.3.2 Clarification of scope 8
2.4 Architectural Information 8
2.5 Documentation 10
2.6 IT Product Testing 10
2.6.1 Testing approach and depth 10
2.6.2 Independent penetration testing 10
2.6.3 Test configuration 11
2.6.4 Test results 11
2.7 Reused Evaluation Results 11
2.8 Evaluated Configuration 11
2.9 Evaluation Results 11
2.10 Comments/Recommendations 11
3 Security Target 13
4 Definitions 13
5 Bibliography 14
Page: 3/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Foreword
The Netherlands Scheme for Certification in the Area of IT Security (NSCIB) provides a third-party
evaluation and certification service for determining the trustworthiness of Information Technology (IT)
security products. Under this NSCIB, TÜV Rheinland Nederland B.V. has the task of issuing
certificates for IT security products, as well as for protection profiles and sites.
Part of the procedure is the technical examination (evaluation) of the product, protection profile or site
according to the Common Criteria assessment guidelines published by the NSCIB. Evaluations are
performed by an IT Security Evaluation Facility (ITSEF) under the oversight of the NSCIB Certification
Body, which is operated by TÜV Rheinland Nederland B.V. in cooperation with the Ministry of the
Interior and Kingdom Relations.
An ITSEF in the Netherlands is a commercial facility that has been licensed by TÜV Rheinland
Nederland B.V. to perform Common Criteria evaluations; a significant requirement for such a licence is
accreditation to the requirements of ISO Standard 17025 “General requirements for the accreditation
of calibration and testing laboratories”.
By awarding a Common Criteria certificate, TÜV Rheinland Nederland B.V. asserts that the product or
site complies with the security requirements specified in the associated (site) security target, or that
the protection profile (PP) complies with the requirements for PP evaluation specified in the Common
Criteria for Information Security Evaluation. A (site) security target is a requirements specification
document that defines the scope of the evaluation activities.
The consumer should review the (site) security target or protection profile, in addition to this
certification report, to gain an understanding of any assumptions made during the evaluation, the IT
product's intended environment, its security requirements, and the level of confidence (i.e., the
evaluation assurance level) that the product or site satisfies the security requirements stated in the
(site) security target.
Reproduction of this report is authorised only if the report is reproduced in its entirety.
Page: 4/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Recognition of the Certificate
The presence of the Common Criteria Recognition Arrangement (CCRA) and the SOG-IS logos on the
certificate indicates that this certificate is issued in accordance with the provisions of the CCRA and
the SOG-IS Mutual Recognition Agreement (SOG-IS MRA) and will be recognised by the participating
nations.
International recognition
The CCRA was signed by the Netherlands in May 2000 and provides mutual recognition of certificates
based on the Common Criteria (CC). Since September 2014 the CCRA has been updated to provide
mutual recognition of certificates based on cPPs (exact use) or STs with evaluation assurance
components up to and including EAL2+ALC_FLR.
For details of the current list of signatory nations and approved certification schemes, see
http://www.commoncriteriaportal.org.
European recognition
The SOG-IS MRA Version 3, effective since April 2010, provides mutual recognition in Europe of
Common Criteria and ITSEC certificates at a basic evaluation level for all products. A higher
recognition level for evaluation levels beyond EAL4 (respectively E3-basic) is provided for products
related to specific technical domains. This agreement was signed initially by Finland, France,
Germany, The Netherlands, Norway, Spain, Sweden and the United Kingdom. Italy joined the SOG-IS
MRA in December 2010.
For details of the current list of signatory nations, approved certification schemes and the list of
technical domains for which the higher recognition applies, see https://www.sogis.eu.
Page: 5/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
1 Executive Summary
This Certification Report states the outcome of the Common Criteria security evaluation of the TnD
v5.1 on ID-One Cosmo X (PACE/EAC1/Polymorphic eMRTD/LDS2 configuration). The developer of
the TnD v5.1 on ID-One Cosmo X (PACE/EAC1/Polymorphic eMRTD/LDS2 configuration) is IDEMIA
located in Courbevoie, France and they also act as the sponsor of the evaluation and certification. A
Certification Report is intended to assist prospective consumers when judging the suitability of the IT
security properties of the product for their particular requirements.
The TOE is a composite product that consist of an IDEMIA applet named TnD v5.1 and its supporting
“Common” library package on top of the COSMO X Global Platform Java Card 3.0.5 operating system
and Infineon SLC37 contact/contactless smart card security controller in PACE/EAC1/Polymorphic
eMRTD/LDS2 configuration.
The TOE supports the ICAO and TR-3110-1 and -3 defined protocols for EAC1 (Chip Authentication
v1 and Terminal Authentication v1), PACE (Generic Mapping (GM), Integrated Mapping (IM) and Chip
Authentication Mapping (CAM)), Active Authentication (AA) and LDS2 protocol extensions for EAC1
and PACE. In addition, the TOE supports Polymorphic Authentication protocol (PMA) for privacy-
protected authentication with polymorphic ID attributes.
For compliancy with the protection profiles claimed in the security target, the PACE and EAC1
protocols MUST be configured on the TOE for each configured ID document application mentioned
below.
Within the scope of the Security Target [ST], the TOE can be configured as a stand-alone application
or as a combination of the following official ID document applications:
 ICAO/EAC eMRTD, including LDS2 Travel records (stamps), Visa records and Additional
biometrics in accordance with ICAO [ICAO-9303] and [LDS2_TR] specifications,
 Polymorphic eMRTD according to Dutch national specification and
 EU/ISO Driving Licence compliant to ISO/IEC 18013 or ISO/IEC TR 19446.
The Polymorphic eMRTD application is in compliance with the Polymorphic eMRTD Specification of
the Dutch National Office of Identity Data (written by IDEMIA). This ensures authentication to an
authentication service at eIDAS High assurance level, without revealing privacy sensitive ID attributes
to the authentication service provider. This is accomplished by the TOE’s Polymorphic Authentication
(PMA) protocol, which randomizes Polymorphic Pseudonym, Identity and Complementary ID
attributes.
The TOE may also be used as an ISO Driving Licence (IDL) compliant to ISO/IEC 18013 or ISO/IEC
TR 19446, as both eMRTD and IDL applications share the same protocols and data structure
organization.
The TnD v5.1 application embeds other secure functionalities (e.g. BAC and EAC in combination with
BAC), which are not in the scope of this evaluation, but are covered in the scope of other evaluated
configurations of this product.
The TOE has been evaluated by Brightsight B.V. located in Delft, The Netherlands. The evaluation
was completed on 26 August 2021 with the approval of the ETR. The certification procedure has been
conducted in accordance with the provisions of the Netherlands Scheme for Certification in the Area of
IT Security [NSCIB].
The scope of the evaluation is defined by the security target [ST], which identifies assumptions made
during the evaluation, the intended environment for the TnD v5.1 on ID-One Cosmo X
(PACE/EAC1/Polymorphic eMRTD/LDS2 configuration), the security requirements, and the level of
confidence (evaluation assurance level) at which the product is intended to satisfy the security
requirements. Consumers of the TnD v5.1 on ID-One Cosmo X (PACE/EAC1/Polymorphic
eMRTD/LDS2 configuration) are advised to verify that their own environment is consistent with the
security target, and to give due consideration to the comments, observations and recommendations in
this certification report.
Page: 6/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
The results documented in the evaluation technical report [ETR]
1
for this product provide sufficient
evidence that the TOE meets the EAL5 augmented (EAL5+) assurance requirements for the evaluated
security functionality. This assurance level is augmented with ALC_DVS.2 (Sufficiency of security
measures) and AVA_VAN.5 (Advanced methodical vulnerability analysis).
The evaluation was conducted using the Common Methodology for Information Technology Security
Evaluation, Version 3.1 Revision 5 [CEM] for conformance to the Common Criteria for Information
Technology Security Evaluation, Version 3.1 Revision 5 [CC] (Parts I, II and III).
TÜV Rheinland Nederland B.V., as the NSCIB Certification Body, declares that the evaluation meets
all the conditions for international recognition of Common Criteria Certificates and that the product will
be listed on the NSCIB Certified Products list. Note that the certification results apply only to the
specific version of the product as evaluated.
1
The Evaluation Technical Report contains information proprietary to the developer and/or the
evaluator, and is not available for public review.
Page: 7/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
2 Certification Results
2.1 Identification of Target of Evaluation
The Target of Evaluation (TOE) for this evaluation is the TnD v5.1 on ID-One Cosmo X
(PACE/EAC1/Polymorphic eMRTD/LDS2 configuration) from IDEMIA located in Courbevoie, France.
The TOE is comprised of the following main components:
Delivery
item type
Identifier Version
Platform ID-One Cosmo X
SAAAAR Code:
093363
Software
TnD applet (SAAAAR 203621FF) v5.1 (00000208)
Common Package (SAAAAR 417641FF) v1.0
(01010008, Config 1)
(01040007, Config 2)
To ensure secure usage a set of guidance documents is provided, together with the TnD v5.1 on ID-
One Cosmo X (PACE/EAC1/Polymorphic eMRTD/LDS2 configuration). For details, see section 2.5
“Documentation” of this report.
For a detailed and precise description of the TOE lifecycle refer to the [ST], chapter 4.
2.2 Security Policy
The TOE encompasses the following features:
 In Personalisation phase:
o Authentication protocol for personalisation agent authentication;
o 3DES, AES128, AES192 and AES256 Global Platform secure messaging;
o Access control;
o Creation and configuration of application instances and their logical data structure;
o Secure data loading;
o Secure import and/or on-chip generation of Chip Authentication key pairs for CAv1
and PACE-CAM;
o Secure import and/or on-chip generation of the AA key pair;
o Life-cycle phase switching to operational phase.
 In operational phase:
o PACE mapping types Generic Mapping (GM), Integrated Mapping (IM) and Chip
Authentication Mapping (CAM)*; Note*: The availability of PACE-CAM depends on
platform configuration;
o PACE passwords: MRZ, CAN, PIN and PUK;
o PACE PIN/PUK suspend/resume mechanism according to [TR-03110-2] in case of
TOE communication over the contactless interface;
o PIN/PUK verify and PIN reset;
o EAC1: Chip Authentication v1 (CAv1) and Terminal Authentication v1 (TAv1);
o Active Authentication (AA);
o After CAv1: restart ICAO secure messaging in 3DES, AES128, AES192 or AES256
cipher mode;
Page: 8/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
o After PACE start ICAO secure messaging in 3DES, AES128, AES192 or AES256
cipher mode;
o After EAC1: access control to DG3 and DG4 based on the effective authorization
established during TAv1;
o After EAC1: Polymorphic Authentication;
o LDS2 protocol extensions for PACE, TAv1 and CAv1 and EAC1 access control to
LDS2 applications (Travel records, Visa records and Additional Biometrics);
o Automatic BAC phasing out;
o Digital Blurring of Images (DBI).
2.3 Assumptions and Clarification of Scope
2.3.1 Assumptions
The assumptions defined in the Security Target are not covered by the TOE itself. These aspects lead
to specific Security Objectives to be fulfilled by the TOE-Environment. For detailed information on the
security objectives that must be fulfilled by the TOE environment, see section 7.2 of the [ST].
2.3.2 Clarification of scope
The evaluation did not reveal any threats to the TOE that are not countered by the evaluated security
functions of the product
TnD v5.1 applet supports Match on Card (MoC) functionality, which is used to support the DBI
deactivation. MoC as a security feature is not within the scope of the [ST], though may be configured
without impacting the security of the TOE.
Note that the ICAO MRTD infrastructure critically depends on the objectives for the environment to be
met. These are not weaknesses of this particular TOE, but aspects of the ICAO MRTD infrastructure
as a whole.
The environment in which the TOE is personalised must perform proper and safe personalisation
according to the guidance and referred ICAO guidelines.
The environment in which the TOE is used must ensure that the inspection system protects the
confidentiality and integrity of the data send and read from the TOE.
2.4 Architectural Information
From physical/hardware point of view, the TOE is a bare microchip with its external interfaces for
communication. The physical medium on which the microchip is mounted is not part of the target of
evaluation because it does not alter nor modify any security functions of the TOE.
The TOE may be used in several form factors, like wafer, chip modules on a reel, chip modules
embedded in ID3 passport booklets or ID3 holder pages, chip modules embedded in ID1 cards, chip
modules embedded in antenna inlays, etc.
The logical architecture, originating from the Security Target [ST] of the TOE can be depicted as
follows:
Page: 9/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
Logical architecture of the TOE.
The Target of Evaluation (TOE), addressed by the security target, is an electronic travel document
representing a contactless/contact based smart card or passport, programmed according to the
Logical data structure (LDS) and authentication protocols specified in [ICAO-9303], [9303-10_LDS2],
[LDS2_TR], [TR-03110-1], [TR-03110-3] and [PCA-eMRTD].
In accordance with [EAC-PP-V2] and [PACE-PP] and the communication between terminal and chip
SHALL be established and protected by the Password Authenticated Connection Establishment
(PACE) protocol.
The TOE may also be used as an ISO driving license, compliant to ISO/IEC 18013 or ISO/IEC TR
19446.
The Polymorphic eMRTD extensions present on the TOE enable secure authentication with enhanced
privacy protection features. It provides the ID document holder the possibility to authenticate towards a
service provider at eIDAS High assurance level in a non-traceable and non-linkable manner thanks to
usage of Polymorphic Pseudonyms and other Polymorphic ID attributes. This is accomplished by the
TOE's Polymorphic Authentication (PMA) protocol, which randomizes Polymorphic Pseudonym,
Identity and Complementary ID attributes.
The ICAO LDS2 protocol and Logical Data Structure extensions are available in the TOE for
supporting secure access and storage Electronic visas, electronic travel stamps or additional
biometrics like fingerprint or an iris scan.
The “TnD v5.1 on Cosmo X” TOE consists of:
 The MRTD’s chip circuitry and the IC dedicated software;
 The IC embedded software being the “ID-One Cosmo X platform” consisting of:
o Java Card virtual machine, ensuring language-level security;
o Java Card runtime environment, providing additional security features for Java card
technology enabled devices;
o Java card API, providing access to card’s resources for the Applet;
Global Platform Card Manager, responsible for management of Applets on the card.
o Crypto Library.
 TnD v5.1 Applet along with its Common (library) Package loaded in non-volatile (FLASH)
memory;
 The associated guidance documentation in [AGD_PRE] and [AGD_OPE];
 The Personalization Agent Key set (see [AGD_PRE]).
Page: 10/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
2.5 Documentation
The following documentation is provided with the product by the developer to the customer:
Reference Identifier Version
[AGD_OPE] TnD v5.1 on ID-One Cosmo X - Operational User Guidance
(AGD_OPE)
FQR 220 1580 Ed 1
[AGD_PRE] TnD v5.1 on ID-One Cosmo X - Preparative Procedures
(AGD_PRE)
FQR 220 1579 Ed 3
2.6 IT Product Testing
Testing (depth, coverage, functional tests, independent testing): The evaluators examined the
developer’s testing activities documentation and verified that the developer has met their testing
responsibilities.
2.6.1 Testing approach and depth
The developer tested the TOE using both a standardised accreditation test suite and a proprietary test
suite for Common Criteria to ensure that all SFRs in the Security Target were tested. By performing an
extensive requirements analysis and testing accordingly, the developer ensured that the required
depth and coverage of testing was achieved.
For the testing performed by the evaluators, the sample of repeated developer tests was chosen to get
a coverage of all the features while ensuring coverage of all product configurations, i.e., including
PACE(-CAM), CA, TA, AA, DBI, BAC, PIN, and PMA, as well as configurations where relevant
platform functionality was not available. Additionally, this sample allowed the evaluator to observe
different cryptographic algorithms including RSA, ECDSA, and ECDH. Finally, the sample included a
range of different important (internal) applet security features, such as certificate chaining, the state
machine, access control of the file system, slow down, verification failure, and certificate attribute
checking, covering both the personalization as well as the operational phase. The repetition was
performed through witnessing.
The developer test strategy already included a high depth of testing. The evaluator-defined tests
focused on the verification of specific countermeasures and on passport traceability, in addition to a
verification of the preparatory guidance.
2.6.2 Independent penetration testing
 When evaluating the evidence in the classes ASE, ADV and AGD the evaluator considered
whether potential vulnerabilities can already be identified due to the TOE type and/or specified
behaviour in such an early stage of the evaluation.
 For ADV_IMP a thorough implementation representation review was performed on the TOE.
During this attack-oriented analysis, the protection of the TOE was analysed using the
knowledge gained from all previous evaluation classes. This resulted in the identification of
(additional) potential vulnerabilities. This analysis was performed according to the attack
methods in [JIL-AAPS]. An important source for assurance in this step was the technical
report [PF-ETRfC] of the underlying platform.
 All potential vulnerabilities were analysed using the knowledge gained from all evaluation
classes and information from the public domain. A judgment was made on how to assure that
these potential vulnerabilities are not exploitable. The potential vulnerabilities were addressed
by penetration testing, a guidance update or in other ways that were deemed appropriate.
The results of the TOE penetration tests that were defined are presented below. The penetration
testing comprised one week, 100% of which consisted of perturbation attacks.
Page: 11/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
2.6.3 Test configuration
The configuration of the sample used for independent evaluator testing and penetration testing was
the same as described in the [ST].
Independent testing was performed on an earlier revision of the TOE. The assurance gained from
testing on an earlier revision has been assessed to be valid for the final TOE version, because the
changes introduced were minimal and did not have an impact on the TSF.
2.6.4 Test results
The testing activities, including configurations, procedures, test cases, expected results and observed
results are summarised in the [ETR], with references to the documents containing the full details.
The developer’s tests and the independent functional tests produced the expected results, giving
assurance that the TOE behaves as specified in its [ST] and functional specification.
No exploitable vulnerabilities were found with the independent penetration tests.
The algorithmic security level of cryptographic functionality has not been rated in this certification
process, but the current consensus on the algorithmic security level in the open domain, i.e., from the
current best cryptanalytic attacks published, has been taken into account.
2.7 Reused Evaluation Results
There has been extensive reuse of the ALC aspects for the sites involved in the development and
production of the TOE, by use of 10 Site Technical Audit Reuse report approaches.
No sites have been visited as part of this evaluation.
2.8 Evaluated Configuration
The TOE is defined uniquely by its name and version number TnD v5.1 on ID-One Cosmo X
(PACE/EAC1/Polymorphic eMRTD/LDS2 configuration).
2.9 Evaluation Results
The evaluation lab documented their evaluation results in the [ETR], which references an ASE
Intermediate Report and other evaluator documents, and Site Technical Audit Report(s) for the site(s)
[STAR]
2
.
The verdict of each claimed assurance requirement is “Pass”.
Based on the above evaluation results the evaluation lab concluded the TnD v5.1 on ID-One Cosmo X
(PACE/EAC1/Polymorphic eMRTD/LDS2 configuration), to be CC Part 2 extended, CC Part 3
conformant, and to meet the requirements of EAL 5 augmented with ALC_DVS.2 and AVA_VAN.5.
This implies that the product satisfies the security requirements specified in Security Target [ST].
The Security Target claims ‘strict’ conformance to the Protection Profile [PP0056] and [PP0068].
2.10 Comments/Recommendations
The user guidance as outlined in section 2.5 “Documentation” contains necessary information about
the usage of the TOE.
In addition, all aspects of assumptions, threats and policies as outlined in the Security Target not
covered by the TOE itself must be fulfilled by the operational environment of the TOE.
The customer or user of the product shall consider the results of the certification within his system risk
management process. For the evolution of attack methods and techniques to be covered, the
customer should define the period of time until a re-assessment for the TOE is required and thus
requested from the sponsor of the certificate.
2
The Site Technical Audit Report contains information necessary to an evaluation lab and
certification body for the reuse of the site audit report in a TOE evaluation.
Page: 12/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
The strength of the cryptographic algorithms and protocols was not rated in the course of this
evaluation. This specifically applies to the following proprietary or non-standard algorithms, protocols
and implementations: none.
Not all key sizes specified in the security target have sufficient cryptographic strength for satisfying the
AVA_VAN.5 “high attack potential”. In order to be protected against attackers with a “high attack
potential”, sufficiently large cryptographic key sizes SHALL be configured for this TOE.
Page: 13/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
3 Security Target
The Security Target TnD v5.1 on ID-One Cosmo X (PACE/EAC1/Polymorphic eMRTD/LDS2
configuration), FQR 550 0161, Ed 6, 11 August 2021 [ST] is included here by reference.
Please note that, to satisfy the need for publication, a public version [ST-lite] has been created and
verified according to [ST-SAN].
4 Definitions
This list of acronyms and definitions contains elements that are not already defined by the CC or CEM:
AA Active Authentication
BAC Basic Access Control
CA Chip Authentication
CAM Chip Authentication Mapping
CAN Card Access Number
DBI Digital Blurring of Images
EAC Extended Access Control
ECDH Elliptic Curve Diffie-Hellman algorithm
ECDSA Elliptic Curve Digital Signature Algorithm
eMRTD electronic MRTD
GM Generic Mapping
IC Integrated Circuit
ICAO International Civil Aviation Organization
IM Integrated Mapping
IT Information Technology
ITSEF IT Security Evaluation Facility
JIL Joint Interpretation Library
LDS Logical Data Structure
MAC Message Authentication Code
MRTD Machine Readable Travel Document
NSCIB Netherlands Scheme for Certification in the area of IT security
PACE Password Authenticated Connection Establishment
PIN Personal Identification Number
PP Protection Profile
PUK Personal Unblocking Key
TA Terminal Authentication
TOE Target of Evaluation
Page: 14/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
5 Bibliography
This section lists all referenced documentation used as source material in the compilation of this
report.
[9303-
10_LDS2]
TR Logical Data Structure (LDS) for Storage of Data in the Contactless IC -
Doc 9303-10 LDS 2 – New Applications, v21, 10 November 2018
[CC] Common Criteria for Information Technology Security Evaluation, Parts I, II
and III, Version 3.1 Revision 5, April 2017
[CEM] Common Methodology for Information Technology Security Evaluation,
Version 3.1 Revision 5, April 2017
[ETR] Evaluation Technical Report “TnD v5.1 on ID-One Cosmo X” – EAL5+, 21-
RPT-601, Version 5.0, 11 August 2021
[ICAO-9303] International Civil Aviation Organization, ICAO Doc 9303, Machine Readable
Travel Documents – 7th edition, 2015
[JIL-AAPS] JIL Application of Attack Potential to Smartcards, Version 3.1, June 2020
[JIL-AM] Attack Methods for Smartcards and Similar Devices, Version 2.4, January
2020 (sensitive with controlled distribution)
[LDS2_TR] TECHNICAL REPORT LDS2 – Protocols, Version 0.8, 27 April 2017
[NSCIB] Netherlands Scheme for Certification in the Area of IT Security, Version 2.5,
28 March 2019
[PCA-eMRTD] Polymorphic eMRTD Specification, V2.1, 03 April 2018
[PF-CERT] Rapport de certification ANSSI-CC-2021/29, ID-One COSMO X, (Code
SAAAAR : 093363), 2021-07-05
[PF-ETRfC] Evaluation Technical Report (ETR for composition) – ZEUS, v1.2, 2021-06-
01.
[PF-ST] Security Target Lite ID-ONE COSMO X, FQR 110 9730 Ed 3.
[PP0056] Protection Profile Machine Readable Travel Document with “ICAO
Application”, Extended Access Control with PACE (EAC PP), Version 1.3.2,
05 December 2012, registered under the reference BSI-CC-PP-0056-V2-
2012
[PP0068] Protection Profile Machine Readable Travel Document using Standard
Inspection Procedure with PACE, Version 1.0.1, 22 July 2014, registered
under the reference BSI-CC-PP-0068-V2-MA-01
[ST] Security Target TnD v5.1 on ID-One Cosmo X (PACE/EAC1/Polymorphic
eMRTD/LDS2 configuration), FQR 550 0161, Ed 6, 11 August 2021
[ST-lite] TnD v5.1 on ID-One Cosmo X (PACE/EAC1/Polymorphic eMRTD/LDS2
configuration) Public Security Target, FQR 550 0247, Ed 3, 11 August 2021
[ST-SAN] ST sanitising for publication, CC Supporting Document CCDB-2006-04-004,
April 2006
[TR-03110-1] Technical Guideline TR-03110-1, Advanced Security Mechanisms for
Machine Readable Travel Documents –Part 1 – eMRTDs with BAC/PACEv2
and EACv1, Version 2.10, 20 March 2012
Page: 15/15 of report number: NSCIB-CC-0362721-CR, dated 26 August 2021
®
TÜV,
TUEV
and
TUV
are
registered
trademarks.
Any
use
or
application
requires
prior
approval.
[TR-03110-2] Technical Guideline TR-03110-2, Advanced Security Mechanisms for
Machine Readable Travel Documents –Part 2 – Extended Access Control
Version 2 (EACv2), Password Authenticated Connection Establishment
(PACE),and Restricted Identification (RI), Version 2.10, 20 March 2013
[TR-03110-3] TR-03110-3 Advanced Security Mechanisms for Machine Readable Travel
Documents – Part 3: Common Specifications, version 2.10, 07 March 2012
(This is the end of this report.)