CC Huawei iMaster NCE V100R020C10 for NCE-Fabric, NCE-FabricInsight, NCE-CampusInsight, NCE-WAN and V300R020C10 for NCE-Campus Security Target Issue 1.5 Date 2021-07-22 HUAWEI TECHNOLOGIES CO., LTD. Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. i Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: https://www.huawei.com Email: support@huawei.com CC HUAWEI iMaster NCE V100R20C10 - Security Target About This Document Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. ii About This Document Change History Version Date Change Description Author V1.0 2020-10-16 Initial Draft ChenYan,RaoLei V1.1 2021-03-23 Modified according to review comments ChenYan,RaoLei V1.2 2021-05-27 Modified according to review comments WangZhengguo V1.3 2021-06-01 Modified according to review comments HeYajun V1.4 2021-07-16 Modified according to review comments HeYajun V1.5 2021-07-22 Modified according to review comments HeYajun CC HUAWEI iMaster NCE V100R20C10 - Security Target Contents Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. iii Contents About This Document................................................................................................................... ii 1 Introduction ...................................................................................................................................1 1.1 ST Reference..............................................................................................................................................................1 1.2 TOE Reference ..........................................................................................................................................................1 1.3 TOE Overview ............................................................................................................................................................1 1.3.1 TOE Usage and Major Security Features ...........................................................................................................4 1.3.2 TOE Type .................................................................................................................................................................4 1.3.3 on-TOE Hardware and Software ..........................................................................................................................5 1.4 TOE Description.......................................................................................................................................................12 1.4.1 TOE Definition Scope...........................................................................................................................................12 1.4.1.1 Physical Scope...................................................................................................................................................12 1.4.1.2 Logical Scope.....................................................................................................................................................15 2 CC Conformance Claims..........................................................................................................17 3 Security Problem Definition....................................................................................................18 3.1 Assumptions .............................................................................................................................................................18 3.2 Threats.......................................................................................................................................................................18 3.2.1 Assets and Agents ................................................................................................................................................18 3.2.2 Threats Addressed by the TOE...........................................................................................................................19 3.2.2.1 T.UnauthenticatedAccess .................................................................................................................................19 3.2.2.2 T.UnauthorizedAccess ......................................................................................................................................19 3.2.2.3 T.Eavesdrop........................................................................................................................................................19 4 Security Objectives ...................................................................................................................21 4.1 Security Objectives for the TOE ............................................................................................................................21 4.2 Security Objectives for the Operational Environment.........................................................................................21 4.3 Security Objectives Rationale ................................................................................................................................22 4.3.1 Coverage................................................................................................................................................................22 4.3.2 Sufficiency..............................................................................................................................................................23 5 Security Requirements for the TOE ......................................................................................26 5.1 Conventions..............................................................................................................................................................26 5.2 Security Requirements............................................................................................................................................26 5.2.1 Security Audit (FAU) .............................................................................................................................................26 CC HUAWEI iMaster NCE V100R20C10 - Security Target Contents Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. iv 5.2.1.1 FAU_GEN.1 Audit Data Generation................................................................................................................26 5.2.1.2 FAU_GEN.2 User Identity Association ...........................................................................................................27 5.2.1.3 FAU_SAR.1 Audit Review ................................................................................................................................27 5.2.1.4 FAU_SAR.2 Restricted Audit Review .............................................................................................................27 5.2.1.5 FAU_SAR.3 Selectable Audit Review.............................................................................................................28 5.2.1.6 FAU_STG.1 Protected Audit Trail Storage.....................................................................................................28 5.2.1.7 FAU_STG.3 Action in Case of Possible Audit Data Loss.............................................................................28 5.2.2 User Data Protection (FDP) ................................................................................................................................28 5.2.2.1 FDP_ACC.2 Completing Access Control .......................................................................................................28 5.2.2.2 FDP_ACF.1 Security Attribute-Based Access Control..................................................................................28 5.2.2.3 FDP_UIT.1 Data exchange integrity................................................................................................................29 5.2.3 Identification and Authentication (FIA)...............................................................................................................29 5.2.3.1 FIA_UID.2 User Identification Before Any Action ..........................................................................................29 5.2.3.2 FIA_UAU.2 User Authentication Before Any Action......................................................................................29 5.2.3.3 FIA_UAU.5 Multiple Authentication Mechanisms..........................................................................................29 5.2.3.4 FIA_UAU.6 Re-authenticating..........................................................................................................................30 5.2.3.5 FIA_UAU.7 Protected Authentication Feedback ...........................................................................................30 5.2.3.6 FIA_ATD.1 User Attribute Definition................................................................................................................30 5.2.3.7 FIA_AFL.1 Authentication Failure Handling...................................................................................................31 5.2.3.8 FIA_SOS.1 Verification of Secrets ..................................................................................................................31 5.2.4 Security Management (FMT) ..............................................................................................................................32 5.2.4.1 FMT_SMF.1 Specification of Management Functions..................................................................................32 5.2.4.2 FMT_SMR.1 Security Roles.............................................................................................................................32 5.2.4.3 FMT_MOF.1 Management of Security Functions Behaviour ......................................................................33 5.2.4.4 FMT_MTD.1 Management of TSF Data.........................................................................................................34 5.2.4.5 FMT_MSA.1 Management of Security Attributes..........................................................................................34 5.2.4.6 FMT_MSA.3 Static Attribute Initialization .......................................................................................................34 5.2.5 TOE Access (FTA) ................................................................................................................................................35 5.2.5.1 FTA_TSE.1 TOE Session Establishment .......................................................................................................35 5.2.5.2 FTA_SSL.3 TSF-initiated Termination.............................................................................................................35 5.2.5.3 FTA_SSL.4 User-initiated Termination............................................................................................................35 5.2.5.4 FTA_TAH.1 TOE Access History .....................................................................................................................35 5.2.6 Trusted Path/Channels (FTP) .............................................................................................................................36 5.2.6.1 FTP_TRP.1 Trusted Path..................................................................................................................................36 5.2.6.2 FTP_ITC.1/External System Inter-TSF Trusted Channel ............................................................................36 5.2.6.3 FTP_ITC.1/NE Inter-TSF Trusted Channel....................................................................................................36 5.2.7 Cryptographic Support (FCS)..............................................................................................................................37 5.2.7.1 FCS_CKM.1/AES Cryptographic Key Generation ........................................................................................37 5.2.7.2 FCS_CKM.4 Cryptographic Key Destruction.................................................................................................37 5.2.7.3 FCS_COP.1/AES Cryptographic operation....................................................................................................37 5.2.7.4 FCS_COP.1/PBKDF2 Cryptographic Operation ...........................................................................................37 CC HUAWEI iMaster NCE V100R20C10 - Security Target Contents Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. v 5.3 Security Functional Requirements Rationale.......................................................................................................37 5.3.1 Coverage................................................................................................................................................................37 5.3.2 Sufficiency..............................................................................................................................................................39 5.3.3 Security Requirements Dependency Rationale................................................................................................41 5.4 Security Assurance Requirements ........................................................................................................................44 5.5 Security Assurance Requirements Rationale ......................................................................................................45 6 TOE Summary Specification...................................................................................................46 6.1 TOE Security Functionality .....................................................................................................................................46 6.1.1 User Manageme....................................................................................................................................................46 6.1.2 Authentication........................................................................................................................................................48 6.1.3 Access Control ......................................................................................................................................................49 6.1.4 Communication Security......................................................................................................................................50 6.1.5 User Session Management.................................................................................................................................51 6.1.6 Auditing...................................................................................................................................................................51 6.1.7 Security Management Function..........................................................................................................................52 6.1.8 Cryptographic Functions......................................................................................................................................53 7 Abbreviations, Terminology and References .....................................................................54 7.1 Abbreviations ............................................................................................................................................................54 7.2 Terminology...............................................................................................................................................................55 7.3 References................................................................................................................................................................55 CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 1 1 Introduction This Security Target is for the evaluation of HUAWEI iMaster NCE V100R020C10 for NCE-Fabric, NCE-FabricInsight, NCE-CampusInsight, NCE-WAN and V300R020C10 for NCE-Campus. 1.1 ST Reference Title: CC Huawei iMaster NCE V100R020C10 for NCE-Fabric, NCE-FabricInsight, NCE- CampusInsight, NCE-WAN and V300R020C10 for NCE-Campus Security Target Version: V1.5 Author: Huawei Technologies Co., Ltd. Publication date: 2021-07-22 1.2 TOE Reference TOE name: HUAWEI iMaster NCE V100R020C10 for NCE-Fabric, NCE-FabricInsight, NCE-CampusInsight, NCE-WAN and V300R020C10 for NCE-Campus TOE version: V100R020C10SPC100 and V300R020C10SPC100 TOE Developer: Huawei Technologies Co., Ltd. TOE release date: 2021-06-01 1.3 TOE Overview iMaster NCE is an innovative network cloud engine developed by Huawei. Positioned as the brain of future cloud-based networks, NCE integrates functions such as network management, service control, and network analysis. It is the core enablement system for network resource pooling, network connection automation and self-optimization, and O&M automation. Only the on premises mode is in scope of this evaluation. As shown in 0, NCE is located at the management and control layer of the cloud-based network: CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 2 0 NCE network positioning As shown in Figure 1-1, NCE manages and controls IP network devices on data center networks (NCE-Fabric/FabricInsight), campus networks (NCE- Campus/CampusInsight), and WANs (NCE-WAN). The SDN technology implements automatic network configuration, centralized network control, and intelligent O&M.  NCE also opens capabilities to support interconnection and integration with upper- layer OSSs, service orchestrators and service applications for quick customization of the application layer. 02 NCE deployment scenarios CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 3 The goal of NCE is to build an intent-driven network (IDN) that is first automated, then self-adaptive, and finally autonomous.  Automated: Network deployment and maintenance are automated throughout the network lifecycle.  Self-adaptive: Service policies are automatically generated based on big data using the real-time analyzer to implement proactive maintenance and closed-loop optimization.  Autonomous: Artificial intelligence and machine learning are used to build an intelligent network that can automatically generate dynamic policies. The core and base of NCE is the CloudSOP platform. The CloudSOP platform provides the basic framework for OSS application deployment, monitoring and secondary development, as well as public services, such as user management, rights management, session management, log management, certificate management, key management, license management, alarm management. The architecture of CloudSOP is highly reliable, flexible, open, and easy to be integrated, meeting the requirements from future OSS large-scale distributed clusters. NCE-WAN: iMaster NCE-WAN is a management and control system for Huawei SD-WAN Solution. It manages enterprise interconnection services and provides automatic deployment of private line services, intelligent traffic steering policy configuration, value- added service (VAS) management, plug-and-play, and visualized operations and maintenance (O&M) capabilities. NCE-Campus: iMaster NCE-Campus is a centralized management and web-based control system designed for the CloudCampus solution. It supports a wide range of functions, including network service management, network access management, network monitoring, network quality analysis, network application analysis, alarm management, report management. CampusInsight: Huawei CampusInsight, an intelligent network O&M platform, overrides traditional resource monitoring methods and applies AI to the O&M domain. Based on existing O&M data (such as device metrics and client logs), big data, AI algorithms, and more advanced analysis technologies, CampusInsight digitizes user experience on the network to help customers detect network access issues in a timely manner, improving CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 4 user experience. NCE-Fabric: iMaster NCE-Fabric is a next-generation SDN controller for enterprise and carrier data center markets and is a core component of Huawei CloudFabric DCN solution. FabricInsight: Huawei FabricInsight, an intelligent network analysis platform, overrides the traditional monitoring mode of focusing on the resource status. The platform detects fabric status and application behavior status in real time, breaks network and application boundaries, and helps customers detect network and application issues in time from the application perspective, ensuring continuous and stable running of applications. 1.3.1 TOE Usage and Major Security Features iMaster NCE is a unified platform that manages, controls, and maintains cloud-based SDN networks. NCE can be used in carrier, enterprise, and residential service scenarios. It is a unified software orchestration and workflow engine that implements automation and autonomy, including planning and simulation, service provisioning, monitoring, assurance, and optimization, on physical and virtual networks throughout their lifecycles. The major security features of NCE that are subject to evaluation are: 1. User management 2. Authentication 3. Access control 4. Communication security 5. User session management 6. Auditing 7. Security management function 8. Cryptographic functions 1.3.2 TOE Type The TOE is a software system for cloud network management. The TOE is located at the management and control layer of the cloud-based network. It can manage and control ubiquitous network devices. It provides open interfaces to quickly integrate with upper- layer application systems such as OSSs, service orchestrators and service applications. Various apps can be developed and customized to accelerate service innovation and achieve e-commerce-style operations. NCE is a cloud-based system that uses a service-oriented software architecture. It is deployed on a virtualized platform and can be scaled flexibly. Based on the cloud platform, NCE implements three logical modules (network management, network control, and network analysis) and various scenario-oriented applications as services and components. This allows customers to deploy NCE in a flexible and modular manner to meet their specific requirements. The NCE software architecture is shown in Figure 1-3 TOE overview. In the northbound direction, it provides Web portals and northbound interfaces for O&M personnel, OSS, service orchestrator and service application. In the southbound direction, it provides configuration and management capabilities for Huawei network devices and provides third-party driver management to manage and access third-party network adaptation drivers and third-party controllers outside the trusted zone. The system also interconnects with external NTP servers, SFTP servers, AAA authentication servers, Syslog servers, CA servers and SMS/SMTP servers. CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 5 03 TOE overview 1.3.3 Non-TOE Hardware and Software NCE can be deployed in on-premises or private cloud mode. In On-premises mode, Huawei engineers install the hardware, virtualization environment, OS, database, and NCE software in an E2E manner. In private cloud mode (OS+product), after customers configure the virtualization environment, Huawei engineers create VMs and install OSs, databases and NCE software. Only the on premises mode is in scope of this evaluation. NCE has specific requirements on the hardware, software and client to ensure the stable running of the system. Hardware Configurations for On-Premises Deployment: In on-premises scenarios, the delivered server has been configured according to the NCE requirements based on the network type, functional unit, and network scale. For detail, see Product Documentation. For enterprise user, log in to https://support.huawei.com/enterprise, search Product Documentation. Configuration for the NCE Server Software: Table 1-1 Server configuration requirements Item Scenario Type Version Remarks Delivered software NCE-Fabric OS CentOS 7.6 The customer needs to prepare the operating system image. CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 6 Item Scenario Type Version Remarks configura tions OS Novell SUSE Linux Enterprise Server 12 SP4/SP5 The customer needs to prepare the operating system image. OS EulerOS V2.9 Huawei provides the OS installation image of EulerOS 2.9 by default. TaiShan 200 (Model 2280) Database Gauss100 OLTP 1.1.0 Huawei provides the Gauss100 OLTP 1.0.5.SPC110 by default. CampusInsi ght/ FabricInsight OS EulerOS V2.9 TaiShan 200 (Model 2280) Database Gauss100 OLTP 1.1.0 NCE- Campus OS EulerOS V2.9 TaiShan 200 (Model 2280) Database Gauss100 OLTP 1.1.0 NCE-WAN OS EulerOS V2.9 TaiShan 200 (Model 2280) Database Gauss100 OLTP 1.1.0 Configuration for the NCE Client: Table 1-2 Client configuration requirements Type Requirements PC Minimum configuration: Memory: 2 GB Cloud Desktop Minimum configuration:  Memory: 2 GB OS  Windows 10 (32-bit or 64-bit)  Windows 8 (32-bit or 64-bit)  Windows 7 (32-bit or 64-bit)  SUSE 11 SP3 Web browser  Recommended: − Google Chrome latest version (32-bit or 64-bit)  Compatible: − Google Chrome 57 or later (32-bit or 64-bit) − Firefox ESR 52 or later (32-bit or 64-bit) Resolution 1366 x 768 px or higher; recommended resolution: 1920 x 1080 px CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 7 Except the server, OS and DB as described above, the environment for TOE also comprises the following components: Table 1-3 Environment components Component Required/O ptional Usage/Purpose Description for TOE Performance Firewall Required( NCE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) Firewall used by customers to ensure communication security between different communication planes. Network Elements (NEs) Required( NCE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) NEs that are managed by the TOE and support different communication protocols with the TOE. Web portal, OSSs, service orchestrato rs and service application s Required( NCE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) The web portal connects to the TOE using HTTPS. And the OSSs, service orchestrators and service applications that connect to the TOE through external interfaces including SNMPv3, SFTP, and some customized RESTful interfaces. AAA server Optional(N CE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) The external AAA server used to authenticate users. The TOE can correctly leverage the services provided by this AAA server to authenticate administrators. The security mechanisms for remote LDAP/RADIUS authentication depend on the third-party AAA server. Security mechanisms, such as anti-brute force cracking, password complexity check, and anti-DoS attack, must be enabled on the third-party server. Especially the communication channel between TOE and RADIUS server should be protected. Syslog server Optional(N CE-WAN/ NCE- Campus/ Syslog server used to transmit syslog messages. CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 8 Component Required/O ptional Usage/Purpose Description for TOE Performance FabricInsig ht/ CampusIn sight/ NCE- Fabric) SFTP server Optional(N CE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) SFTP server used to upload performance files and back up NE data. SMS/SMT P server Optional(N CE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) NCE sends notifications by emails or messages. CA server Optional(N CE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) CA server can apply for a certificate, update the certificate, and publish the CRL certificate revocation list (CRL) file. NTP server Required( NCE-WAN/ NCE- Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) NTP server is used to sync the time of the NCE server. EasySuite Required( NCE-WAN/ NCE- EasySuite used to install and deploy NCE. The tool, which is managed by a single user, encrypts sensitive information such as passwords for storage and protection, protects the CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 9 Component Required/O ptional Usage/Purpose Description for TOE Performance Campus/ FabricInsig ht/ CampusIn sight/ NCE- Fabric) software package against tampering through digital signature verification, and ensures the security of the tool using the EasySuite security mechanism. NCE is installed using EasySuite and security hardening is performed on EulerOS by default, including OS account and password security, system service/component minimization, file/directory permission minimization, authentication and authorization, kernel parameter security, and system log audit. For details, see the AGD document. EulerOS itself is not included in the TOE. FusionInsig ht Require(N CE- Campus/N CE- WAN/Fabri cInsight/ CampusIn sight) FusionInsight builds a reliable, secure, and easy-to-use operation and maintenance (O&M) platform and provides storage and analysis capabilities for massive data, helping address enterprise data storage and processing demands。 Figure 1-4 shows the physical environment of NCE, which is the typical environment. CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 10 0 TOE physical environment Non-TOE Software : scenario Deliverable Name NCE-Fabric iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip.cms iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip.crl iMasterNCE-Fabric_V100R020C10SPC100_Deploy-3-node_linux-aarch64.zip iMasterNCE-Fabric_V100R020C10SPC100_Deploy-3-node_linux-aarch64.zip.cms iMasterNCE-Fabric_V100R020C10SPC100_Deploy-3-node_linux-aarch64.zip.crl iMasterNCE-Fabric_V100R020C10SPC100_Kubernetes_linux-aarch64.zip iMasterNCE-Fabric_V100R020C10SPC100_Kubernetes_linux-aarch64.zip.cms iMasterNCE-Fabric_V100R020C10SPC100_Kubernetes_linux-aarch64.zip.crl iMasterNCE-Fabric_V100R020C10SPC100_Plugins-Config-Script_linux-aarch64.zip iMasterNCE-Fabric_V100R020C10SPC100_Plugins-Config-Script_linux- aarch64.zip.cms iMasterNCE-Fabric_V100R020C10SPC100_Plugins-Config-Script_linux- aarch64.zip.crl iMasterNCE-Fabric_V100R020C10SPC100BXX_Neutron-Plugin_linux-aarch64.zip iMasterNCE-Fabric_V100R020C10SPC100BXX_Neutron-Plugin_linux- aarch64.zip.cms iMasterNCE-Fabric_V100R020C10SPC100BXX_Neutron-Plugin_linux- CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 11 aarch64.zip.crl P1V1R18C10K04C04.zip P1V1R18C10K04C04.zip.cms P1V1R18C10K04C04.zip.crl iMasterNCE-FabricV100R020C10SPC100BXX_PortMirror_linux-aarch64.zip iMasterNCE-FabricV100R020C10SPC100BXX_PortMirror_linux-aarch64.zip.cms iMasterNCE-FabricV100R020C10SPC100BXX_PortMirror_linux-aarch64.zip.crl iMasterNCE-Fabric_V100R020C10SPC100_MDC_linux-aarch64.7z iMasterNCE-Fabric_V100R020C10SPC100_MDC_linux-aarch64.7z.cms iMasterNCE-Fabric_V100R020C10SPC100_MDC_linux-aarch64.7z.crl iMasterNCE_V100R020C10SPC100_AAMonitor_linux-aarch64.zip iMasterNCE_V100R020C10SPC100_AAMonitor_linux-aarch64.zip.cms iMasterNCE_V100R020C10SPC100_AAMonitor_linux-aarch64.zip.crl update_tool.tar.gz update_tool.tar.gz.cms update_tool.tar.gz.crl NCE- CampusInsight iMasterNCE-CampusInsight_V100R020C10SPC100_ICMR_linux-aarch64.zip iMasterNCE-CampusInsight_V100R020C10SPC100_ICMR_linux-aarch64.zip.cms iMasterNCE-CampusInsight_V100R020C10SPC100_ICMR_linux-aarch64.zip.crl FusionInsight_BASE_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_BASE_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_BASE_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_HD_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_HD_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_HD_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_Manager_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_Manager_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_Manager_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_Spark2x_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_Spark2x_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_Spark2x_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_SetupTool_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_SetupTool_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_SetupTool_8.0.2.1_Euler_AArch64.tar.gz.crl NCE- FabricInsight iMasterNCE-FabricInsight_V100R020C10SPC100_ICMR_linux-aarch64.zip iMasterNCE-FabricInsight_V100R020C10SPC100_ICMR_linux-aarch64.zip.cms iMasterNCE-FabricInsight_V100R020C10SPC100_ICMR_linux-aarch64.zip.crl FusionInsight_BASE_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_BASE_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_BASE_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_HD_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_HD_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_HD_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_Manager_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_Manager_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_Manager_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_Spark2x_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_Spark2x_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_Spark2x_8.0.2.1_Euler_AArch64.tar.gz.crl FusionInsight_SetupTool_8.0.2.1_Euler_AArch64.tar.gz FusionInsight_SetupTool_8.0.2.1_Euler_AArch64.tar.gz.cms FusionInsight_SetupTool_8.0.2.1_Euler_AArch64.tar.gz.crl CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 12 NCE- Campus iMasterNCE-Campus_V300R020C10SPC100_EulerOS2.9Patch-aarch64.tar iMasterNCE-Campus_V300R020C10SPC100_EulerOS2.9Patch-aarch64.tar.cms iMasterNCE-Campus_V300R020C10SPC100_EulerOS2.9Patch-aarch64.tar.crl iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip.cms iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip.crl iMasterNCE_V100R020C10SPC020B008_POL_linux.zip iMasterNCE_V100R020C10SPC020B008_POL_linux.zip.cms iMasterNCE_V100R020C10SPC020B008_POL_linux.zip.crl iMasterNCE_V100R020C10SPC120_AAMonitor_linux-aarch64.zip iMasterNCE_V100R020C10SPC120_AAMonitor_linux-aarch64.zip.cms iMasterNCE_V100R020C10SPC120_AAMonitor_linux-aarch64.zip.crl iMasterNCE_V100R020C10SPC120_linux-GaussDBPatch-aarch64_pkg.tar iMasterNCE_V100R020C10SPC120_linux-GaussDBPatch-aarch64_pkg.tar.cms iMasterNCE_V100R020C10SPC120_linux-GaussDBPatch-aarch64_pkg.tar.crl NCE- WAN iMasterNCE_V100R020C10SPC120_linux-GaussDBPatch-aarch64_pkg.tar iMasterNCE_V100R020C10SPC120_linux-GaussDBPatch-aarch64_pkg.tar.cms iMasterNCE_V100R020C10SPC120_linux-GaussDBPatch-aarch64_pkg.tar.crl iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip.cms iMasterNCEServerInstall_V100R020C10SPC120_ICMR_linux-aarch64.zip.crl pre_migrate_check.zip pre_migrate_check.zip.cms pre_migrate_check.zip.crl iMasterNCE-WAN_V100R020C10SPC100_EulerOS2.9Patch-aarch64.tar iMasterNCE-WAN_V100R020C10SPC100_EulerOS2.9Patch-aarch64.tar.cms iMasterNCE-WAN_V100R020C10SPC100_EulerOS2.9Patch-aarch64.tar.crl iMasterNCE_V100R020C10SPC120_ExtAdvancedSEC_linux-aarch64.7z iMasterNCE_V100R020C10SPC120_ExtAdvancedSEC_linux-aarch64.7z.cms iMasterNCE_V100R020C10SPC120_ExtAdvancedSEC_linux-aarch64.7z.crl iMasterNCE_V100R020C10SPC120_TrustCenter_linux-aarch64.7z iMasterNCE_V100R020C10SPC120_TrustCenter_linux-aarch64.7z.cms iMasterNCE_V100R020C10SPC120_TrustCenter_linux-aarch64.7z.crl 1.4 TOE Description 1.4.1 TOE Definition Scope This section will define the scope of the iMaster NCE to be evaluated. NCE can be deployed in on-premises or private cloud mode. Only on-premises mode is certified. For details about the configuration specifications for the two modes, see 1.3.3 . 1.4.1.1 Physical Scope The TOE is a software only and the TOE is to be installed on a specified non-TOE hardware server. The servers, OSs, and databases make up the TOE environment to meet the security requirements. Users can log in to the HUAWEI support website to download the software packet in accordance to the version of the TOE. Users can verify the software by digital signature (The digital signature is also published on the HUAWEI support website). NCE software package consists of binary compressed files. The following software packages and documents are required and are part of the TOE. NCE supports five CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 13 deployment scenarios. The following table lists the software packages corresponding to each deployment scenario. Table 1-4 TOE software list scenario Deliverable Name NCE-Fabric iMasterNCE-Fabric_V100R020C10SPC100_CommonE_linux-aarch64.7z iMasterNCE-Fabric_V100R020C10SPC100_CommonE_linux-aarch64.7z.cms iMasterNCE-Fabric_V100R020C10SPC100_CommonE_linux-aarch64.7z.crl iMasterNCE-Fabric_V100R020C10SPC100_OMP_linux-aarch64.zip iMasterNCE-Fabric_V100R020C10SPC100_OMP_linux-aarch64.zip.cms iMasterNCE-Fabric_V100R020C10SPC100_OMP_linux-aarch64.zip.crl iMasterNCE-Fabric_V100R020C10SPC100_UniCollect_linux-aarch64.7z iMasterNCE-Fabric_V100R020C10SPC100_UniCollect_linux-aarch64.7z.cms iMasterNCE-Fabric_V100R020C10SPC100_UniCollect_linux-aarch64.7z.crl iMasterNCE-Fabric_V100R020C10SPC100_Base_linux-aarch64.7z iMasterNCE-Fabric_V100R020C10SPC100_Base_linux-aarch64.7z.cms iMasterNCE-Fabric_V100R020C10SPC100_Base_linux-aarch64.7z.crl NCE- CampusInsight iMasterNCE-CampusInsight_V100R020C10SPC100_Analyzer_linux-aarch64.zip iMasterNCE-CampusInsight_V100R020C10SPC100_Analyzer_linux-aarch64.zip.cms iMasterNCE-CampusInsight_V100R020C10SPC100_Analyzer_linux-aarch64.zip.crl NCE- FabricInsight iMasterNCE-FabricInsight_V100R020C10SPC100_Analyzer_linux-aarch64.zip iMasterNCE-FabricInsight_V100R020C10SPC100_Analyzer_linux-aarch64.zip.cms iMasterNCE-FabricInsight_V100R020C10SPC100_Analyzer_linux-aarch64.zip.crl NCE- Campus iMasterNCE_V100R020C10SPC120_OMP_linux-aarch64.zip iMasterNCE_V100R020C10SPC120_OMP_linux-aarch64.zip.cms iMasterNCE_V100R020C10SPC120_OMP_linux-aarch64.zip.crl iMasterNCE_V100R020C10SPC120_OMP-Extend_linux-aarch64.zip iMasterNCE_V100R020C10SPC120_OMP-Extend_linux-aarch64.zip.cms iMasterNCE_V100R020C10SPC120_OMP-Extend_linux-aarch64.zip.crl iMasterNCE_V100R020C10CP2002B005_CommonE_linux-aarch64.7z iMasterNCE_V100R020C10CP2002B005_CommonE_linux-aarch64.7z.cms iMasterNCE_V100R020C10CP2002B005_CommonE_linux-aarch64.7z.crl iMasterNCE_V300R020C10SPC100B118_Shared_linux-aarch64.7z iMasterNCE_V300R020C10SPC100B118_Shared_linux-aarch64.7z.cms iMasterNCE_V300R020C10SPC100B118_Shared_linux-aarch64.7z.crl iMasterNCE_Campus_V300R020C10SPC100_linux-aarch64.7z iMasterNCE_Campus_V300R020C10SPC100_linux-aarch64.7z.cms iMasterNCE_Campus_V300R020C10SPC100_linux-aarch64.7z.crl CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 14 NCE- WAN iMasterNCE_V100R020C10SPC120_OMP_linux-aarch64.zip iMasterNCE_V100R020C10SPC120_OMP_linux-aarch64.zip.cms iMasterNCE_V100R020C10SPC120_OMP_linux-aarch64.zip.crl iMasterNCE_V100R020C10SPC120_OMP-Extend_linux-aarch64.zip iMasterNCE_V100R020C10SPC120_OMP-Extend_linux-aarch64.zip.cms iMasterNCE_V100R020C10SPC120_OMP-Extend_linux-aarch64.zip.crl iMasterNCE_V100R020C10SPC200B261_CommonE_linux-aarch64.7z iMasterNCE_V100R020C10SPC200B261_CommonE_linux-aarch64.7z.cms iMasterNCE_V100R020C10SPC200B261_CommonE_linux-aarch64.7z.crl iMasterNCE_V300R020C10SPC100B101_Shared_linux-aarch64.7z iMasterNCE_V300R020C10SPC100B101_Shared_linux-aarch64.7z.cms iMasterNCE_V300R020C10SPC100B101_Shared_linux-aarch64.7z.crl iMasterNCE-WAN_V100R020C10SPC100_linux-aarch64.7z iMasterNCE-WAN_V100R020C10SPC100_linux-aarch64.7z.cms iMasterNCE-WAN_V100R020C10SPC100_linux-aarch64.7z.crl Users can log in to the HUAWEI support website to read the document directly or download the product documentation in accordance with the version of the TOE. The download file formats are *.chm, user can download the *.chm from the same website. Table 1-5 TOE guidance list Name Version iMaster NCE-Fabric V100R020C10 Product Documentation V100R020C10 Issue: 02 iMaster NCE-FabricInsight V100R020C10 SPC100 Product Documentation (Standard Cluster Solution) V100R020C10 Issue: 01 iMaster NCE-CampusInsight V100R020C10SPC100 Product Documentation (Independent Deployment) V100R020C10 Issue: 01 iMaster NCE-WAN V100R020C10SPC100 Product Documentation V100R020C10 Issue: 03 iMaster NCE-Campus V300R020C10 Product Documentation V300R020C10 Issue: 02 CC HUAWEI iMaster NCE V100R020C10 for NCE-Fabric, NCE-FabricInsight, NCE- CampusInsight, NCE-WAN and V300R020C10 for NCE-Campus Installation Guide V1.5 CC HUAWEI iMaster NCE V100R020C10 for NCE-Fabric, NCE-FabricInsight, NCE- CampusInsight, NCE-WAN and V300R020C10 for NCE-Campus Security Management Guide V1.5 CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 15 1.4.1.2 Logical Scope NCE integrates functions such as network management, service control, and network analysis. The TOE boundary from a logical point of view is represented by the elements that are displayed in the red box in the figure below. 05 TOE logical scope The major security features of NCE that are subject to evaluation are: User Management On both the management and O&M planes, the TOE provides user management based on role management. On the management plane, it has the default user groups Administrators and SMManagers. On the O&M plane, it has the default user groups Administrators, SMManagers, NBI User Group, Maintenance Group, Monitor Group, Operator Group, Northbound Interface Operator Group, Auditor Group, Open Api Operator, Tenant Administrator, CLI Operator, Open Api Monitor, and MSP Administrator. It also defines user groups for different user roles. Authentication The TOE authenticates all users who access the TOE by username and password. The TOE provides a local authentication mode both on the management plane and the O&M plane. The TOE optionally provides authentication decisions obtained from an external AAA in the IT environment on the O&M plane. CC HUAWEI iMaster NCE V100R020C10 - Security Target 1 Introduction Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 16 Access Control The TOE supports SMManagers to grant permissions to users by means of security management. Then users can access and perform operations on the TOE and NEs based on their permissions. Communication Security The TOE supports encrypted transmission within the NCE server, between NEs and the NCE server, between a browser and the NCE server, and between an OSS/service orchestrator/service application and the NCE server. User Session Management The TOE monitors and presents all online user sessions in real time. The TOE also provides session establishment, TSF-initiated session termination, user-initiated session termination. Auditing The TOE generates audit records for security-relevant management and stores the records in the database. Logs record routine maintenance events of the TOE. For security purposes, the TOE provides security logs and operation logs. Security logs record operation events related to account management, such as modification of passwords and addition of accounts. Operation logs record events related to system configurations, such as modification of IP addresses and addition of services. The TOE provides a Syslog solution to resolve the problem of limited storage space. Both security logs and operation logs can be saved on an external Syslog server. Security Management Functions The TOE offers security management for all management aspects of the TOE. Security management includes not only authentication and access control management, but also management of security-related data consisting of configuration profiles and runtime parameters. Security management can be customized. Cryptographic Functions Cryptographic functions are dependencies required by security features. The TOE supports cryptographic algorithms as described in section 5.2.7 Cryptographic Support. CC HUAWEI iMaster NCE V100R020C10 - Security Target 2 CC Conformance Claims Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 17 2 CC Conformance Claims This ST is CC Part 2 conformant [CC] and CC Part 3 conformant [CC]. The CC version of [CC] is 3.1 Revision 5. This ST is EAL4+ALC_FLR.2-conformant as defined in [CC] Part 3. The methodology to be used for evaluation is CEM3.1 R5. No conformance to a Protection Profile is claimed. CC HUAWEI iMaster NCE V100R019C10 - Security Target 3 Security Problem Definition Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 18 3 Security Problem Definition 3.1 Assumptions A.PhysicalProtection The hardware that the TOE is running on is operated in a physically secure and well managed environment. It is assumed that the software platform of the server that the TOE is running on (as listed in section 1.4.1 TOE Definition Scope) is protected against unauthorized physical access. It is assumed that the database is protected against data file damage. A.NetworkSegregation It is assumed that the network interface of the server and the TOE client will be accessed only through subnets where the TOE hosts are installed. The subnet is separate from public networks. Communications with the TOE server are performed through a firewall. See section 1.4.2 Environment for more information. A.AdministratorBehaviour It is assumed that the super user admin, a user that belongs to the SMManagers and Administrators groups and the users of the underlying operating system will behave correctly and will not perform any harmful operation on the TOE. A.NTP It is assumed that operating environment should provide an accurate time source, in order to ensure normal operations of the TOE server. A.NetworkElements It is assumed that the managed network elements are trusted and can support the TLS /SNMPv3 /SSHv2 /SFTP connection with the TOE, and the private interface defined by Huawei. A.Components It is assumed that the 3rd party components (like NTP server, SFTP server, AAA server, syslog server, SMS/SMTP server, and CA server) are considered trusted and will not attack the TOE and the communication to 3rd party components is under protection. A.TrustedPlatform It is assumed that the platform like OS, DB, hardware, virtual machine used by the TOE is trusted, and is properly hardened by the Administrator. A.FusionInsight It is assumed that FusionInsight is trusted and will not attack the TOE and the communication with FusionInsight is under protection. 3.2 Threats The threats described in this chapter are addressed by the TOE. 3.2.1 Assets and Agents Asset Description TOE security function The integrity and confidentiality of TSF data (such as user CC HUAWEI iMaster NCE V100R019C10 - Security Target 3 Security Problem Definition Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 19 (TSF) data account information, passwords and audit records) should be protected against threat agents. OM data The confidentiality and integrity of the OM data of NEs (such as configuration data) should be protected against threat agents. Agent Description Attacker An external attacker, who is not a user of the TOE. Eavesdropper An eavesdropper, who has access to communication channels through which the OM and TSF data are transferred. Unauthorized user An unauthorized user of the TOE, who gains unauthorized access to the TOE. 3.2.2 Threats Addressed by the TOE 3.2.2.1 T.UnauthenticatedAccess Threat: T.UnauthenticatedAccess Attack An attacker who is not a user of the TOE, gains access to the TOE, modifies and compromises the confidentiality of the TSF and OM data. Asset TSF and OM data Agent An attacker 3.2.2.2 T.UnauthorizedAccess Threat: T.UnauthorizedAccess Attack An unauthorized user who gains unauthorized access to the TOE and compromises the confidentiality and integrity of the TSF and OM data. The user also performs unauthorized operations on NEs through the TOE. Asset TSF and OM data Agent An unauthorized user 3.2.2.3 T.Eavesdrop Threat: T.Eavesdrop Attack An eavesdropper (remote attacker) in the management network served by the TOE, who is able to intercept, modify, or re-use information assets that are exchanged between the TOE and NEs, between the TOE client and server, and between the TOE server and OSS/service orchestrator/service application client. Asset TSF and OM data CC HUAWEI iMaster NCE V100R019C10 - Security Target 3 Security Problem Definition Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 20 Agent An eavesdropper CC HUAWEI iMaster NCE V100R021C10 - Security Target 4 Security Objectives Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 21 4 Security Objectives 4.1 Security Objectives for the TOE The following objectives must be met by the TOE: 1. O.Communication The TOE implements logical protection measures for network communication between the TOE and NEs from the operational environment, also for the network communication between the TOE and the OSS/service orchestrator/service application. 2. O.Authorization The TOE authorizes different roles that can be assigned to administrators in order to restrict the functions available to individual administrators, including limitation to session establishment and to actions performed on NEs. (The TOE authorizes different roles that can be assigned to users in order to restrict the functions available to a specific user.) 3. O.Authentication The TOE authenticates users before access to data and security functions is granted. The TOE provides configurable system policies to restrict user session establishment. 4. O.Audit The TOE generates, stores and reviews audit records for security-relevant administrator actions. 5. O.SecurityManagement The TOE manages security functions that it provides. 4.2 Security Objectives for the Operational Environment 1. OE.NetworkElements The operational environment ensures that the trusted NEs support the TLS /SNMPv3/SSHv2/SFTP/HTTPS connection with the TOE and private interface defined by Huawei. 2. OE.Physical The TOE is protected against unauthorized physical access. 3. OE.NetworkSegregation The operational environment protects the network where the TOE hosts are installed by separating it from the application (or public) network. A firewall is installed between the TOE server and untrusted domain to filter unused communication ports. 4. OE.Database The operational environment protects the database against unauthorized physical access and data file damage. 5. OE.AdministratorBehaviour The super user admin, the users who belong to the SMManagers and Administrators groups and the users of the underlying operating system will behave correctly and will not perform any harmful operation on the TOE. CC HUAWEI iMaster NCE V100R021C10 - Security Target 4 Security Objectives Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 22 6. OE.NTP The operational environment provides an accurate time source, in order to ensure normal operations on the TOE server. 7. OE.TrustedPlatform The operation environment provides a trusted platform like OS, DB, hardware, virtual machine. 8. OE.Components The 3rd party components are considered trusted and will not attack the TOE. The administrator shall ensure the communication between the TOE and the NTP server, SFTP server, AAA server, syslog server, SMS/SMTP server, and CA server is secured when these servers are used. 9. OE.FusionInsight FusionInsight builds a reliable, secure, and easy-to-use operation and maintenance (O&M) platform and provides storage and analysis capabilities for massive data, helping address enterprise data storage and processing demands. 4.3 Security Objectives Rationale 4.3.1 Coverage The following table provides a mapping of security objectives for the TOE to threats, showing that each security objective is at least covered by one threat. Security Objective for the TOE Threat O.Communication T.Eavesdrop O.Authentication T.UnauthenticatedAccess and T.UnauthorizedAccess O.Authorization T.UnauthorizedAccess O.Audit T.UnauthorizedAccess and T.UnauthenticatedAccess O.SecurityManagement T.UnauthenticatedAccess, T.UnauthorizedAccess and T.Eavesdrop The following table provides a mapping of security objectives for the operational environment to assumptions and threats, showing that each security objective for the operational environment is at least covered by one assumption or threat. Security Objective for the Operational Environment Threat / Assumption OE.NetworkElements T.Eavesdrop A.NetworkElements OE.Physical A.PhysicalProtection T.UnauthenticatedAccess OE.NetworkSegregation A.NetworkSegregation OE.Database A.PhysicalProtection T.UnauthenticatedAccess T.UnauthorizedAccess OE. AdministratorBehaviour A.AdministratorBehaviour CC HUAWEI iMaster NCE V100R021C10 - Security Target 4 Security Objectives Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 23 Security Objective for the Operational Environment Threat / Assumption OE.NTP A.NTP OE.TrustedPlatform A.TrustedPlatform OE.Componets A.Components OE.FusionInsight A.FusionInsight 4.3.2 Sufficiency The following rationale justifies that security objectives can counter each individual threat and that the achievement of each security objective can contribute to the removal, diminishing or mitigation of a specific threat: Threat Rationale for Security Objectives T.UnauthenticatedAccess The threat of unauthenticated access to the TOE is countered by requiring the TOE to implement an authentication mechanism for its users (O.Authentication). Authentication mechanisms can be configured by users with sufficient permissions (O.SecurityManagement). The audit records record modification of usernames and passwords, user logins and logouts, login successes and failures (O. Audit). And the threat is countered by requiring the system and database to implement an authentication mechanism for its users (OE.Physical and OE.Database). T.UnauthorizedAccess The threat of unauthorized access is countered by requiring the TOE to implement an access control mechanism checking the operations that may be performed on the TOE and NEs (O.Authorization). The threat is also countered by authenticating the users in the TOE (O.Authentication). Access control mechanisms (including user levels and command levels) can be configured by users with sufficient permissions (O.SecurityManagement). The threat is also countered by audit records showing that if someone indeed performs unauthorized operations, they can be traced to (O.Audit). In addition, OE.Database ensures that user account data stored in the database will not be altered maliciously. T.Eavesdrop The threat of eavesdropping is countered by requiring security communications: - Securing network communication between the portal and NCE server over SFTP/HTTPS CC HUAWEI iMaster NCE V100R021C10 - Security Target 4 Security Objectives Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 24 Threat Rationale for Security Objectives (O.Communication). - Over TLS/SNMPv3/SSHv2/SFTP between the NCE server and NEs (O.Communication and OE.NetworkElements). - Over TLS/SNMPv3/SSHv2/SFTP/HTTPS between the NCE server and the OSS/service orchestrator/service application client (O.Communication). Management of secure communication channels can be performed by users with sufficient permissions (O.SecurityManagement). The following rationale justifies that security objectives for the operational environment can cover each individual assumption and that the achievement of each security objective can contribute to the consistency between a specific assumption and environment. If all security objectives for the operational environment are achieved, the intended usage is realized: Assumption Rationale for Security Objectives A.PhysicalProtection The assumption that the TOE will be protected against unauthorized physical access is addressed by OE.Physical and OE.Database. A.NetworkSegregation The assumption that the TOE is not accessible through the application networks hosted by the networking device is addressed by OE.NetworkSegregation. A.AdministratorBehaviour The assumption that super user admin and the users who belong to the SMManagers and Administrators groups and the users of the underlying operating system will behave correctly and will not perform any harmful operation is addressed by OE.AdministratorBehaviour. A.NTP The assumption that the operational environment provides an accurate time source is addressed by OE.NTP A.NetworkElements The assumption that the managed network elements are trusted and support secure channel is addressed by OE.NetworkElements. A.Components The assumption that the 3rd party components are trusted and support secure channel is addressed by OE.Components. A.TrustedPlatform The assumption that the platform used by the TOE is trusted, and is properly hardened by Administrators is addressed by OE.TrustedPlatform. A.FusionInsight The assumption that FusionInsight are considered trusted and will not attack the TOE and the communication to FusionInsight is under protection CC HUAWEI iMaster NCE V100R021C10 - Security Target 4 Security Objectives Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 25 Assumption Rationale for Security Objectives is addressed by OE.FusionInsight. The following table provides a matrix of TOE objectives and threats. T.Eavesdrop T.UnauthenticatedAcce ss T.Unauthorized Access O.Communication X O.Authentication X X O.Authorization X O.Audit X X O.SecurityManageme nt X X X CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 26 5 Security Requirements for the TOE 5.1 Conventions The following conventions are used for the completion of operations:  Strikethrough indicates text removed as a refinement  (Underlined text in parentheses) indicates additional text provided as a refinement.  Bold text indicates the completion of an assignment.  Italicized and bold text indicates the completion of a selection.  Iteration/N indicates an element of the iteration, where N is the iteration number/character. 5.2 Security Requirements 5.2.1 Security Audit (FAU) 5.2.1.1 FAU_GEN.1 Audit Data Generation FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events: a) Start-up and shutdown of the audit functions; b) All auditable events for the [not specified] level of audit; and c) [The following auditable events: 1. User login and logout 2. User account management a. Creating, deleting, and modifying user accounts b. Changing user passwords, mobile numbers and email addresses c. Granting access rights to user accounts 3. User group (role) management a. Creating, deleting, and modifying user groups b. Granting access rights to user groups 4. Security policy management a. Modifying password policies CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 27 b. Modifying user account policies 5. User session management a. Kicking out individual user sessions 6. ACL management a. Creating, deleting, and modifying ACLs b. Specifying ACLs for individual user account. 7. Region, operation set and device set management 8. Audit log management 9. Certificate management 10. NE management]. FAU_GEN.1.2 The TSF shall records within each audit record at least the following information: a) Date and time of the event, type of event, subject identity (if applicable), and the outcome (success or failure) of the event; and b) For each audit event type, based on the auditable event definitions of the functional components included in the PP/ST, [none]. 5.2.1.2 FAU_GEN.2 User Identity Association FAU_GEN.2.1 For audit events resulting from actions of identified users, the TSF shall be able to associate each auditable event with the identity of the user that caused the event. 5.2.1.3 FAU_SAR.1 Audit Review FAU_SAR.1.1 The TSF shall provide [users attached to SMManagers, users with log query rights] with the capability to read [correspondent information] from the audit records. FAU_SAR.1.2 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. Application Note: Operation rights required for querying and exporting logs vary based on log types. Log Type Permission Security logs generated by all users Query Security Log System logs Query System Log Operation logs generated by all users Query Operation Log Operation logs generated by the current user Query Personal Operation Log 5.2.1.4 FAU_SAR.2 Restricted Audit Review FAU_SAR.2.1 The TSF shall prohibit all users read access to the audit records, except the users who have been CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 28 granted explicit read-access. 5.2.1.5 FAU_SAR.3 Selectable Audit Review FAU_SAR.3.1 The TSF shall provide the ability to apply [selection] of audit data based on [filter criteria of audit fields including start time, end time, operation, level, operator, terminal IP address, result, operation object and details]. 5.2.1.6 FAU_STG.1 Protected Audit Trail Storage FAU_STG.1.1 The TSF shall protect the stored audit records in the audit trail from unauthorized deletion. FAU_STG.1.2 The TSF shall be able to [prevent] unauthorized modifications to the stored audit records in the audit trail. 5.2.1.7 FAU_STG.3 Action in Case of Possible Audit Data Loss FAU_STG.3.1 The TSF shall [store audit records in the database and export them into files] if the audit trail [occupies over the default value of 80% of the database capacity and lasts for over the default duration of 45 days]. 5.2.2 User Data Protection (FDP) 5.2.2.1 FDP_ACC.2 Completing Access Control FDP_ACC.2.1 The TSF shall enforce the [NCE access control policy] on [subjects: users; objects: NE attributes and System data; operation: query, create, modify, delete, start, and stop operations on the object] and all operations among subjects and objects covered by SFP. FDP_ACC.2.2 The TSF shall ensure that all operations between any subject controlled by the TSF and any object controlled by the TSF are covered by an access control SFP. 5.2.2.2 FDP_ACF.1 Security Attribute-Based Access Control FDP_ACF.1.1 The TSF shall enforce the [NCE access control policy] to objects based on the following: [ 1. Users and their following security attributes: a. User ID b. User type c. User role assignment 2. Objects, and their following security attributes: a. Device ID ] CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 29 FDP_ACF.1.2 The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: [ a) Only authorized users are permitted access to operation. b) Users can be configured with different user role to control the NCE access permission. c) An operation set contains many operation rights that are assigned to specific user roles.] FDP_ACF.1.3 The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: [none]. FDP_ACF.1.4 The TSF shall explicitly deny access of subjects to objects based on the following additional rules: [none]. 5.2.2.3 FDP_UIT.1 Data exchange integrity FDP_UIT.1.1 The TSF shall enforce the [assignment: access control SFP(s) and/or information flow control SFP(s)] to [transmit and receive] user data (certificate to/from CA server) in a manner protected from [modification, insertion] errors. FDP_UIT.1.2 The TSF shall be able to determine on receipt of user data (certificate to/from CA server), whether [modification, insertion] has occurred. 5.2.3 Identification and Authentication (FIA) 5.2.3.1 FIA_UID.2 User Identification Before Any Action FIA_UID.2.1 The TSF shall require each user to be successfully identified before allowing any other TSF-mediated actions on behalf of that user. 5.2.3.2 FIA_UAU.2 User Authentication Before Any Action FIA_UAU.2.1 The TSF shall require each user to be successfully authenticated before allowing any other TSF- mediated actions on behalf of that user. 5.2.3.3 FIA_UAU.5 Multiple Authentication Mechanisms FIA_UAU.5.1 The TSF shall provide [local, remote LDAP, remote RADIUS, CAS SSO capability] to support user authentication. FIA_UAU.5.2 The TSF shall authenticate any user's claimed identity according to the [ 1. When local authentication is enabled, user authentication is implemented CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 30 by TOE itself. 2. When LDAP authentication is enabled, user authentication is implemented by a remote LDAP server. 3. When RADIUS authentication is enabled, user authentication is implemented by a remote RADIUS server. 4. When CAS SSO configuration is enabled, user authentication is implemented by the SSO server of the TOE, and the user can log into all trusted SSO clients of other TOE instances without being authenticated again after logging in to one of the trusted TOEs.] 5.2.3.4 FIA_UAU.6 Re-authenticating FIA_UAU.6.1 The TSF shall re-authenticate the user under the conditions [changing the password]. 5.2.3.5 FIA_UAU.7 Protected Authentication Feedback FIA_UAU.7.1 The TSF shall provide only [an obscured feedback] to the user while the authentication is in progress. 5.2.3.6 FIA_ATD.1 User Attribute Definition FIA_ATD.1.1 The TSF shall maintain the following list of security attributes belonging to individual users: [ 1. User ID 2. Username 3. Password 4. User type 5. Mobile number, optional 6. Email address, optional 7. Welcome message, optional 8. Account enable status 9. Login time policy 10. Client IP address policy 11. User role assignment 12. Maximum online sessions, optional 13. Account validity period (days), optional 14. The number of allowed login times, optional 15. Select the policy (Disable user, Delete user, Unlimited) if no login within a period (configurable days), optional 16. Auto-logout if no activity within configurable period, optional 17. Compulsory password renewal (Password validity period (days), In advance warning before password expires (days), Minimum password usage period (days)), optional]. CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 31 5.2.3.7 FIA_AFL.1 Authentication Failure Handling FIA_AFL.1.1 The TSF shall detect when [an administrator configurable positive integer within [1, 99]] unsuccessful authentication attempts occur related to [consecutive failed logins]. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been [met], the TSF shall [lock the user account or IP address for 30 minutes by default]. Application Note: The TOE has a super user admin that by default is locked for 10 minutes. 5.2.3.8 FIA_SOS.1 Verification of Secrets FIA_SOS.1.1 The TSF shall provide a mechanism to verify that secrets meet: [ 1. Min. password length 2. Max. system administrator password length 3. Max. password length 4. Configurable number of latest passwords that cannot be reused 5. Password repetition not allowed within configurable number of months 6. Min. password usage period (days) 7. Password validity period (days) 8. Min. characters different between new and old passwords 9. Min. number of letters 10. Min. number of uppercase letters 11. Min. number of lowercase letters 12. Min. number of digits 13. Min. number of special characters 14. Password that cannot contain spaces 15. Password that cannot contain its username in reverse order 16. Password that cannot be an increasing, decreasing, or interval sequence of digits or letters 17. Policy about max. consecutive characters used in both username and password 18. Policy that the password cannot contain repeated character sequences 19. Max. times a character can consecutively occur 20. Password that cannot contain user's mobile number or email address 21. Password that cannot contain words in the uploaded password dictionary file or hacker language dictionary configured in the backend file] CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 32 5.2.4 Security Management (FMT) 5.2.4.1 FMT_SMF.1 Specification of Management Functions FMT_SMF.1.1 The TSF shall be capable of performing the following management functions: [ 1. Authentication mode configuration 2. User management 3. Role management 4. Account policy 5. Password policy 6. Audit log management 7. Certificate management 8. NE management 9. Client IP Address Policies (ACL) 10. Login time policy 11. Configuration of the time interval of user inactivity for terminating an interactive session 12. Command group management 13. Configuration of trusted channels for connecting to the external entities ]. 5.2.4.2 FMT_SMR.1 Security Roles FMT_SMR.1.1 The TSF shall maintain the roles: [ 1. Administrators(Fabric/Campus/WAN/FabricInsight/CampusInsight) 2. SMManagers(Fabric/Campus/WAN/FabricInsight/CampusInsight) 3. NBI User Group(FabricInsight/CampusInsight) 4. Maintenance Group(Fabric/Campus/WAN/FabricInsight/CampusInsight) 5. Monitor Group(Campus/WAN/FabricInsight/CampusInsight) 6. Operator Group(Fabric/Campus/WAN/FabricInsight/CampusInsight) 7. Northbound Interface Operator Group(Fabric) 8. Auditor Group(Fabric) 9. Open Api Operator(Campus/WAN) 10. Tenant Administrator(Fabric/Campus/WAN) 11. CLI Operator(WAN) 12. Open Api Monitor(Campus/WAN) 13. MSP Administrator(Campus/WAN) 14. user-defined User Group]. FMT_SMR.1.2 The TSF shall be able to associate users with roles. CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 33 5.2.4.3 FMT_MOF.1 Management of Security Functions Behaviour FMT_MOF.1.1 The TSF shall restrict the ability to [determine the behaviour of, disable, enable] the functions [all the security functions defined in FMT_SMF.1] to [users assigned with roles as defined in FMT_SMR.1 or with explicitly assigned security functions]. Application Note: The detail privilege of each role is defined in the following table: Role Name Security Functions Administrators Certificate management Command group management NE management SMManagers Authentication mode configuration User management Role management Account policy Password policy Audit log management Client IP Address Policies (ACL) Login time policy Configuration of the time interval of user inactivity for terminating an interactive session NBI User Group Configuration of trusted channels for connecting to the external entities Maintenance Group NE Management Configuration of trusted channels for connecting to the external entities Monitor Group System monitor group Operator Group NE Management Command group management Configuration of trusted channels for connecting to the external entities Northbound Interface Operator Group Used to interconnect with the cloud platform and third-party cloud management platform, CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 34 and invoke open northbound interfaces of iMaster NCE- Fabric for secondary development. Auditor Group Used to audit system operation records, export logs, and view system and network services. Open Api Operator An open API operator can use open API services and related configurations. Tenant Administrator A tenant administrator can perform operations on tenant services and related configurations. CLI Operator A tenant attached with this role has the permission to import device commands using a command template. Open Api Monitor An open API monitor has the permission to check open API services and related configurations. MSP Administrator A MSP administrator can perform operations on MSP services and related configurations. 5.2.4.4 FMT_MTD.1 Management of TSF Data FMT_MTD.1.1 The TSF shall restrict the ability to [query, modify, delete] the [certificates, private keys, and symmetric keys] to [Users assigned with roles as defined in FMT_SMR.1 or with explicitly assigned security functions]. 5.2.4.5 FMT_MSA.1 Management of Security Attributes FMT_MSA.1.1 The TSF shall enforce the [NCE access control policy] to restrict the ability to [query, modify] the security attributes [all the security attributes defined in FDP_ACF.1 and FIA_ATD.1] to [Users assigned with roles as defined in FMT_SMR.1 or with explicitly assigned security functions]. 5.2.4.6 FMT_MSA.3 Static Attribute Initialization FMT_MSA.3.1 The TSF shall enforce the [NCE access control policy] to provide [restrictive] default values for security attributes that are used to enforce the SFP. CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 35 FMT_MSA.3.2 The TSF shall allow [Users assigned with roles as defined in FMT_SMR.1 or with explicitly assigned security functions] to specify alternative initial values to override the default values when an object or information is created. 5.2.5 TOE Access (FTA) 5.2.5.1 FTA_TSE.1 TOE Session Establishment FTA_TSE.1.1 The TSF shall be able to deny session establishment based on [ a. User identity (username and password) b. Client IP address policies (IP address range for login) c. Login time policies (limited time segment for account login) d. User lock status and enablement status e. Password validity period (days) f. Maximum online sessions g. System login mode] Application Note: System login mode only affects local user login from web interfaces, and does not affect third-party user login. 5.2.5.2 FTA_SSL.3 TSF-initiated Termination FTA_SSL.3.1 The TSF shall terminate an interactive session after an [administrator-configured time interval, by default 30 minutes of user inactivity]. 5.2.5.3 FTA_SSL.4 User-initiated Termination FTA_SSL.4.1 The TSF shall allow user-initiated termination of the user's own interactive session. 5.2.5.4 FTA_TAH.1 TOE Access History FTA_TAH.1.1 Upon successful session establishment, the TSF shall display the [date, time, location] of the last successful session establishment to the user. FTA_TAH.1.2 Upon successful session establishment, the TSF shall display the [date, time, location] of the last unsuccessful attempt to session establishment and the number of unsuccessful attempts since the last successful session establishment. FTA_TAH.1.3 The TSF shall not erase the access history information from the user interface without giving the user an opportunity to review the information. CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 36 5.2.6 Trusted Path/Channels (FTP) 5.2.6.1 FTP_TRP.1 Trusted Path FTP_TRP.1.1 The TSF shall provide a communication path between itself and remote users that is logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from disclosure and modification. FTP_TRP.1.2 The TSF shall permit remote users to initiate communication via the trusted path. FTP_TRP.1.3 The TSF shall require the use of the trusted path for [remote management]. 5.2.6.2 FTP_ITC.1/External System Inter-TSF Trusted Channel FTP_ITC.1.1 The TSF shall provide a communication channel between itself and another trusted IT product that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. FTP_ITC.1.2 The TSF shall permit the TSF and (the external system including the OSS, service orchestrator, service application and 3rd party component) to initiate communication via the trusted channel. FTP_ITC.1.3 The TSF shall initiate communication via the trusted channel for [authentication, dumping audit logs, backing up NE Data and restoring NE data]. 5.2.6.3 FTP_ITC.1/NE Inter-TSF Trusted Channel FTP_ITC.1.1 The TSF shall provide a communication channel between itself and another trusted IT product that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. FTP_ITC.1.2 The TSF shall permit the TSF and (the NEs) to initiate communication via the trusted channel. FTP_ITC.1.3 The TSF shall initiate communication via the trusted channel for [managing NE devices]. CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 37 5.2.7 Cryptographic Support (FCS) 5.2.7.1 FCS_CKM.1/AES Cryptographic Key Generation FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm [PBKDF2] and specified cryptographic key sizes [128 bits] that meet the following: [RFC8018 chapter 5.2] 5.2.7.2 FCS_CKM.4 Cryptographic Key Destruction FCS_CKM.4.1 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method [overwriting with 0 in java or overwriting with 0xcc in python] that meets the following: [none]. 5.2.7.3 FCS_COP.1/AES Cryptographic operation FCS_COP.1.1 The TSF shall perform [symmetric de- and encryption] in accordance with a specified cryptographic algorithm [AES CBC Mode] and cryptographic key sizes [128 bits] that meet the following: [FIPS 197 chapter 5, NIST SP 800-38A chapter 6.2] 5.2.7.4 FCS_COP.1/PBKDF2 Cryptographic Operation FCS_COP.1.1 The TSF shall perform [password hashing] in accordance with a specified cryptographic algorithm [PBKDF2 (SHA256)] and cryptographic key sizes [None] that meet the following: [RFC8018 chapter 5.2]. 5.3 Security Functional Requirements Rationale 5.3.1 Coverage The following table provides a mapping of SFR to the security objectives, showing that each security functional requirement addresses at least one security objective. Security Functional Requirements Objectives FAU_GEN.1 O.Audit FAU_GEN.2 O.Audit FAU_SAR.1 O.Audit FAU_SAR.2 O.Audit FAU_SAR.3 O.Audit FAU_STG.1 O.Audit FAU_STG.3 O.Audit FDP_ACC.2 O.Authorization CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 38 FDP_ACF.1 O.Authorization FDP_UIT.1 O.Communication FIA_UID.2 O.Audit O.Authentication O.Authorization FIA_UAU.2 O.Authentication O.Authorization FIA_UAU.5 O.Authentication O.Authorization FIA_UAU.6 O.Authentication O.Authorization FIA_UAU.7 O.Authentication FIA_ATD.1 O.SecurityManagement FIA_AFL.1 O.Authentication O.Authorization FIA_SOS.1 O.Authentication O.SecurityManagement FMT_SMF.1 O.Audit O.Authentication O.Authorization O.Communication O.SecurityManagement FMT_SMR.1 O.Authorization FMT_MOF.1 O.SecurityManagement FMT_MTD.1 O.SecurityManagement FMT_MSA.1 O.Authorization FMT_MSA.3 O.Authorization FTA_TSE.1 O. Authentication FTA_SSL.3 O.Authentication FTA_SSL.4 O.SecurityManagement FTA_TAH.1 O.Authentication FTP_TRP.1 O.Communication FTP_ITC.1/ External System O.Communication FTP_ITC.1/NE O.Communication CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 39 FCS_CKM.1/AES O.SecurityManagement FCS_CKM.4 O.SecurityManagement FCS_COP.1/AES O.SecurityManagement FCS_COP.1/PBKDF2 O.Authentication O.SecurityManagement 5.3.2 Sufficiency The following rationale provides justification for each security objective for the TOE, showing that the security functional requirements are suitable to meet and achieve the security objectives. Security objectives Rationale O.Audit The generation of audit records is implemented by (FAU_GEN.1). Audit records are supposed to include user identities (FAU_GEN.2) where applicable, which are supplied by the identification mechanism (FIA_UID.2). Audit records are stored in the database, and are filtered to read and search with conditions, and restricted audit review requires authorized users (FAU_SAR.1, FAU_SAR.2, FAU_SAR.3). Management functionality for the audit mechanism is spelled out in (FMT_SMF.1). The audit record is stored in the database, and exported into a file if the size of the audit record exceeds the configured maximum size (FAU_STG.3, FAU_STG.3). O.Communication Communication security is implemented by data integrity protection (FDP_UIT.1) between TOE and the CA server, trusted channels (FTP_ITC.1/External System, FTP_ITC.1/NE) between TOE and external servers, and (FTP_TRP.1) between TOE and the web clients. NE performance data bulk collection and backup and software update are implemented through the secure channel. NCE communicates with NEs through secure channels to manage and control NE devices, including Huawei transport access devices, data communication devices, SDN controllers, and third-party network devices. (FTP_TRP.1) Performance and inventory text files ares transmitted to the OSS/service orchestrator/service application. (FTP_TRP.1) Management functionality to configure the trusted channel for NE communication is provided in (FMT_SMF.1). O.Authentication User authentication (including re-authentication) is implemented by (FIA_UAU.2, FIA_UAU.5, FIA_UAU.6) and supported by individual user identities in (FIA_UID.2). The necessary user attributes (passwords) are spelled out in (FIA_ATD.1). The authentication mechanism supports authentication failure handling (FIA_AFL.1), restrictions as to the validity of accounts for login (FTA_TSE.1), and a password policy (FIA_SOS.1). Management functionality is provided in (FMT_SMF.1). The TOE logs off sessions when they are inactive for a configured period of time (by default 30 minutes) (FTA_SSL.3). The session establishment shall be CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 40 denied based on security attributes (FTA_TSE.1). Authentication feedback information is protected by (FIA_UAU.7). TOE shall display access history of the last successful and unsuccessful logins (FTA_TAH.1). For password verification hash values of passwords are used which are generated using FCS_COP.1/PBKDF2. The authentication mechanism for NBIs and NEs to connect to NCE is also implemented by FIA_UAU.2. O.Authorization The requirement for access control is spelled out in (FDP_ACC.2), and the access control policies are modeled in (FDP_ACF.1) for accessing the NCE server. Unique user IDs are necessary for access control (FIA_UID.2), and user authentication (FIA_UAU.2, FIA_UAU.5). User-related attributes are spelled out in (FIA_ATD.1). Access control is based on the definition of roles as subjects and functions as objects (FMT_SMR.1). Management functionality for the definition of access control policies is provided (FMT_MSA.1, FMT_MSA.3, FMT_SMF.1). User re-authentication is implemented by (FIA_UAU.6) If a user fails to log in to the system for multiple consecutive times, the locking policy for the account and IP address is executed (FIA_AFL.1). O.SecurityManageme nt Management functionality is provided in (FMT_SMF.1/FIA_ATD.1/FIA_SOS.1/FMT_SMF.1/FMT_MOF. 1/FTM_MTD.1/FTA_SSL.4). The AES algorithm is used to encrypt sensitive information such as users' mobile numbers and email addresses. (FCS_CKM.1/AES, FCS_CKM.4, FCS_COP.1/AES, FCS_COP.1/PBKDF2) The following table provides a matrix of SFRs and the security objectives. O.Audit O.Authorizatio n O.Authenticatio n O.Communicati on O.SecurityMana gement FAU_GEN.1 X FAU_GEN.2 X FAU_STG.3 X FAU_SAR.1 X FAU_SAR.2 X FAU_SAR.3 X FAU_STG.1 X FAU_STG.3 X FDP_ACC.2 X FDP_ACF.1 X CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 41 FDP_UIT.1 X FIA_UID.2 X X X FIA_UAU.2 X X FIA_UAU.5 X X FIA_UAU.6 X X FIA_UAU.7 X FIA_ATD.1 X FIA_AFL.1 X X FIA_SOS.1 X X FMT_SMF.1 X X X X X FMT_SMR.1 X FMT_MOF.1 X FMT_MTD.1 X FMT_MSA.1 X FMT_MSA.3 X FTA_TSE.1 X FTA_SSL.3 X FTA_SSL.4 X FTA_TAH.1 X FTP_ITC.1/E xternal System X FTP_ITC.1/N E X FCS_CKM.1/ AES X FCS_CKM.4 X FCS_COP.1/ AES X FCS_COP.1/ PBKDF2 X X 5.3.3 Security Requirements Dependency Rationale Dependencies within the EAL4 package selected for the security assurance requirements have been considered by the authors of CC Part 3 and are not analyzed here again. The security functional requirements in this Security Target do not introduce dependencies on any CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 42 security assurance requirement; neither do the security assurance requirements in this Security Target introduce dependencies on any security functional requirement. The following table demonstrates the dependencies of SFRs modeled in CC Part 2 and how the SFRs for the TOE resolve those dependencies. Security Functional Requirement Dependencies Resolution FAU_GEN.1 FPT_STM.1 Resolved by external time source. The audit time depends on the reliable time stamp. Reliable time stamp depends on external time sources FAU_GEN.2 FAU_GEN.1 FIA_UID.1 FAU_GEN.1 FIA_UID.1 FAU_STG.1 FAU_GEN.1 FAU_GEN.1 FAU_STG.3 FAU_STG.1 FAU_STG.1 FAU_SAR.1 FAU_GEN.1 FAU_GEN.1 FAU_SAR.2 FAU_SAR.1 FAU_SAR.1 FAU_SAR.3 FAU_SAR.1 FAU_SAR.1 FDP_ACC.2 FDP_ACF.1 FDP_ACF.1 FDP_ACF.1 FDP_ACC.2 FMT_MSA.3 FDP_ACF.1 FMT_MSA.3 FDP_UIT.1 [FDP_ACC.1, or FDP_IFC.1], [FTP_ITC.1, or FTP_TRP.1] FDP_ACC.1 and FDP_IFC.1 are not applicable because there is no access control or information flow control enforced. FTP_ITC.1 and FTP_TRP.1 are not applicable because there is no confidentiality issue and no trusted path. FIA_UID.2 None None FIA_UAU.2 FIA_UID.1 FIA_UID.1 FIA_UAU.5 None None FIA_UAU.6 None None FIA_UAU.7 FIA_UAU.1 FIA_UAU.2 CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 43 FIA_ATD.1 None None FIA_AFL.1 FIA_UAU.1 FIA_UAU.2 FIA_SOS.1 None None FMT_SMF.1 None None FMT_SMR.1 FIA_UID.1 FIA_UID.1 FMT_MOF.1 FMT_SMR.1 FMT_SMF.1 FMT_SMR.1 FMT_SMF.1 FMT_MTD.1 FMT_SMR.1 FMT_SMF.1 FMT_SMR.1 FMT_SMF.1 FMT_MSA.1 [FDP_ACC.1 or FDP_IFC.1] FMT_SMR.1 FMT_SMF.1 FDP_ACC.2 FMT_SMR.1 FMT_SMF.1 FMT_MSA.3 FMT_MSA.1 FMT_SMR.1 FMT_MSA.1 FMT_SMR.1 FTA_TSE.1 None None FTA_SSL.3 None None FTA_SSL.4 None None FTA_TAH.1 None None FTP_TRP.1 None None FTP_ITC.1/ External System None None FTP_ITC.1/NE None None FCS_CKM.1/AES [FCS_CKM.2, or FCS_COP.1] FCS_CKM.4 FCS_COP.1 FCS_CKM.4 FCS_CKM.4 [FDP_ITC.1, or FDP_ITC.2, or FCS_CKM.1] FCS_CKM.1 FCS_COP.1/AES [FDP_ITC.1, or FDP_ITC.2, or FCS_CKM.1] FCS_CKM.4 FCS_CKM.1 FCS_CKM.4 FCS_COP.1/PBKDF2 [FDP_ITC.1, or FDP_ITC.2, or FCS_CKM.1] FCS_CKM.4 PBKDF2 is a hash algorithm with no key. CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 44 5.4 Security Assurance Requirements The security assurance requirements for the TOE are the Evaluation Assurance Level 4 components as specified in [CC] Part 3. The following table provides an overview of the assurance components that form the assurance level for the TOE. Assurance class Assurance components ADV: Development ADV_ARC.1 Security architecture description ADV_FSP.4 Complete functional specification ADV_IMP.1 Implementation representation of the TSF ADV_TDS.3 Basic modular design AGD: Guidance documents AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures ALC: Life-cycle support ALC_CMC.4 Production support, acceptance procedures and automation ALC_CMS.4 Problem tracking CM coverage ALC_DEL.1 Delivery procedures ALC_DVS.1 Identification of security measures ALC_LCD.1 Developer defined life-cycle model ALC_TAT.1 Well-defined development tools ALC_FLR.2 Flaw reporting procedures ASE: Security Target evaluation ASE_CCL.1 Conformance claims ASE_ECD.1 Extended components definition ASE_INT.1 ST introduction ASE_REQ.2 Derived security requirements ASE_SPD.1 Security problem definition ASE_OBJ.2 Security objectives ASE_TSS.1 TOE summary specification ATE: Tests ATE_COV.2 Analysis of coverage ATE_DPT.1 Testing: basic design ATE_FUN.1 Functional testing ATE_IND.2 Independent testing - sample AVA: Vulnerability assessment AVA_VAN.3 Focused vulnerability analysis CC HUAWEI iMaster NCE V100R019C10 - Security Target 5 Security Requirements for the TOE Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 45 5.5 Security Assurance Requirements Rationale The evaluation assurance level has been commensurate with the threat environment that is experienced by typical consumers of the TOE. CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 46 6 TOE Summary Specification 6.1 TOE Security Functionality 6.1.1 User Management The TOE supports user management. User management involves user permission management, region management, and user maintenance and monitoring. User management grants permissions to users with different responsibilities, and adjusts the permissions based on service changes. This ensures that users have the necessary permissions to perform tasks and that other management tasks are carried out in order, avoiding unauthorized and insecure operations. Security administrators can create roles, assign operation rights to the roles, and attach users to roles to grant them corresponding operation rights based on service requirements. This implements quick user authorization, improving O&M efficiency. The management plane is responsible for managing products, such as installation, deployment, upgrade, and backup and restoration. The management plane does not manage NEs. Therefore, the management plane provides only application permissions. The role Administrators is to administer the TOE, the role SMManagers is the security role of the TOE, who can complete security management of TSF data, user management, audit review and authorization. On the O&M plane for NCE-Campus,NCE-Fabric,NCE-WAN, to improve management efficiency, security administrators divide the network into regions based on service requirements and allow different personnel to manage users and services in different regions. The role Administrators is to administer the TOE, the role SMManagers is the security role of the TOE, who can complete security management of TSF data, user management, audit review and authorization. On the O&M plane for NCE-Campus ,NCE-Fabric,NCE-WAN, user management involves user group management, user permission management, workgroup management, and user maintenance and monitoring. The role System Administrator is to administer the TOE, who can complete security management of TSF data, user management, audit review and authorization. The TOE also has a default and super user admin, who binding System Administrator. The user group is the same as role on the other planes. On every plane, there is a default and super user admin. The super user admin can complete all the functions, including security and administrative functions. During user permission maintenance period, security administrators can view and modify user, role, user group, and operation set information, and monitor user sessions and operations in real time, ensuring system security. (FMT_MSA.1, FMT_MSA.3, FMT_SMF.1, and FMT_SMR.1) The default roles on the management plane are listed in the table below. CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 47 Role Name Description Administrators The user group has all the permissions except user management, query security log, query personal security log and view online users. SMManagers The user group has permission to manage users, manage licenses, query security logs, view online users, and update ACL policies. Monitors The user group has permission to monitor non-security operations of backup and restore, deployment, system monitoring, maintenance, system settings, alarms, the disaster recovery (DR) system, product planning, trace server product tool, configure NAT tool, information collection, trouble shooting, emergency system, cloud service management, infrastructure, commissioning wizard, etc. Operators The user group has permission to perform non-security operations of backup and restore, deployment, system monitoring, maintenance, system settings, alarms, the disaster recovery (DR) system, product planning, trace server product tool, configure NAT tool, information collection, trouble shooting, emergency system, cloud service management, infrastructure, commissioning wizard, etc. The default roles on the O&M plane are listed in the table below. Role Name Description Scenario Administrator s All Permissions NCE-Fabric NCE-Campus NCE-WAN Administrator s The user group has all the permissions except User Management, Query Security Log, View Online Users, and Query Personal Security Log. NCE- FabricInsight NCE- CampusInsight SMManagers The user group has the User Management, License Manager, View Online Users, and Query Security Log permissions. NCE- FabricInsight NCE- CampusInsight NBI User Group The user group has the permission to configure the northbound interfaces such as SNMP and RESTful NBIs. NCE-Fabric NCE-Campus NCE-WAN NCE- FabricInsight NCE- CampusInsight Monitor Group The user group has the permission to monitor the system status. NCE-Campus NCE-WAN NCE- CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 48 Role Name Description Scenario FabricInsight NCE- CampusInsight Operator Group The domain of this user group is All Objects, and it has operation rights for default operator operation sets. In addition to the rights of Guests group, users in this group have the modify permission (permissions to perform potentially service- affecting operations are not involved). For example, they can change alarm severities. NCE-Campus NCE-Fabric NCE-WAN NCE- FabricInsight NCE- CampusInsight Auditor Group The user group has the permission to audit system operation records, export logs, and view system and network services. NCE-Fabric Open Api Operator An open API operator can use open API services and related configurations. NCE-Campus NCE-WAN Tenant Administrator A tenant administrator can perform operations on tenant services and related configurations. NCE-Campus NCE-Fabric WAN CLI Operator A tenant of this role has the permission to import device commands using a command template. NCE-WAN Open Api Monitor An open API monitor has the permission to check open API services and related configurations. NCE-Campus NCE-WAN MSP Administrator An MSP administrator can perform operations on MSP services and related configurations. NCE-Campus NCE-WAN 6.1.2 Authentication The TOE identifies administrators by a unique ID and enforces their authentication before granting them access to any TSF management interfaces. The TOE authenticates users based on the user attributes defined in FIA_ATD.1. The passwords should meet the defined password policy; otherwise the input of password shall be refused. When a user uses an expired password for login, the system will refuse the login request, the user must request the administrator to reset the password (the administrator can deactivate the password expiration policy). The TOE shall verify that the password meets the following password policies: [ 1. Min. password length 2. Max. system administrator password length 3. Max. password length 4. Configurable number of latest passwords that cannot be reused 5. Password repetition not allowed within the configurable number of months 6. Min. password usage period (days) 7. Password validity period (days) 8. Min. characters different between new & old passwords 9. Min. number of letters 10. Min. number of uppercase letters CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 49 11. Min. number of lowercase letters 12. Min. number of digits 13. Min. number of special characters 14. Password that cannot contain spaces 15. Password that cannot contain its username in reverse order 16. Password that cannot be an increasing, decreasing, or interval sequence of digits or letters 17. Policy about max. consecutive characters used in both the username and password 18. Policy that the password cannot contain repeated character sequences 19. Max. times a character can consecutively occur 20. Password that cannot contain user's mobile number or email address 21. Password that cannot contain words in the password dictionary or hacker language dictionary] Advanced parameters have such as Min. Different characters between new and old passwords, Min. Letter, Min. Lowercase, Min. Numbers. User IDs are unique within the TOE and are stored together with associated passwords and other attributes including extended security attributes in the TOE's configuration database. If the user is in the disabled status, the login will be refused. Authentication based on security attributes is enforced prior to any other interaction with the TOE for all interfaces of the TOE. If you enter the password for the admin user incorrectly for five consecutive times within 10 minutes, the client IP address will be locked for 10 minutes. The TOE supports the account and IP address lockout policy on the Account Policy page. The default account lockout policy is that when you enter the password incorrectly for example, 5 consecutive times within 10 minutes, the account will be locked for 30 minutes and automatically unlocked afterwards. The default IP address lockout policy is that when you enter the password incorrectly for 10 consecutive times within 1 minute, the IP address will be locked for 30 minutes and automatically unlocked afterwards. If three accounts using a client IP address are locked within 10 minutes, this client IP address will be locked for 30 minutes. All users can log in to the O&M plane again after the lockout period expires. Local users can also contact security administrators to unlock their accounts for re-login. (FIA_AFL.1, FIA_ATD.1, FIA_SOS.1, FIA_UAU.2, FIA_UAU.7, FIA_UID.2, FTA_TSE.1). The management plane only supports local authentication, and don’t need to support SSO. On the O&M plane, the user authentication modes include local authentication and remote authentication. In remote authentication mode, users are authenticated by an AAA server through AAA protocols. The O&M plane supports Lightweight Directory Access Protocol (LDAP) and Remote Authentication Dial In User Service (RADIUS) for AAA authentication. The O&M plane supports CAS and SAML SSO. SSO configuration allows users to access multiple mutually trusted application systems after only one login authentication. For supporting the SAML SSO, the O&M plane can be SP or IdP. (FIA_UAU.5). The TOE can re-authenticate the user under the condition of changing passwords (FIA_UAU.6). The TOE displays the asterisk (*) that has the same length as the entered password, and returns a username or password error when login failed (FIA_UAU.7). 6.1.3 Access Control The TOE enforces an authorization policy by defining access rights that are assigned to users and roles by the security roles or the super user admin. The TOE enforces the access control policy on users and groups as subjects, CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 50 domains as objects, functional operations issued by subjects on objects. The domains as objects shall define the scope of NEs. Operations shall not be performed on NEs not contained in domains. The access control is based on users or groups and objects; and the security attribute object ID of an object must have a domain, including the specified NE, device type, and NEs in the subnet. The access control is used to identify all the operations over objects through the NCE client if the operation rights have been assigned by the SMManagers or the super user admin (identification and authentication of operation rights). The TOE can offer an access control list (ACL) of features based on IP addresses for controlling which terminals can access the TOE through the TOE client. The ACL is based on IP addresses. The security role SMManagers and the super user admin can specify each individual IP address or IP address range in the ACL of a specified user ID. The user can log in to the TOE only from terminals whose IP addresses are in the ACL. (FDP_ACC.2, FDP_ACF.1, FMT_SMR.1, FMT_MSA.1, FMT_MSA.3, and FTA_TSE.1) 6.1.4 Communication Security The TOE supports encrypted transmission between NEs and the TOE, the external system and the TOE, remote user and the TOE. It provides secure protocols, such as TLS, SNMPv3, SSHv2 and SFTP, for data transmission.  Communication Security between NEs and the TOE: As a client, the TOE can initiate SNMPv3, SSHv2 and TLS connections to establish secure channels with the NEs. Different configurations (NCE-Fabric, NCE-Campus, NCE-WAN, NCE-FabricInsight, NCE-CampusInsight) support different secure channels on SBI. Table 6-1 shows which configuration supports what secure channel. Table 6-1 Southbound secure channels supported by deployment scenarios Secure Channel Deployment Scenario NCE- Fabric NCE- Campus NCE-WAN NCE- FabricInsi ght NCE- CampusIn sight TLS √ √ √ √ √ SSH √ √ √ √ √ SNMPv3 √ √ √ √  Communication Security between the external system and the TOE: As a server, the TOE can receive the TLS, HTTPS, and SNMPv3 connections initiated by the OSS, service orchestrator, or service application to establish secure channels. Different configurations (NCE-Fabric, NCE-Campus, NCE-WAN, NCE-FabricInsight, NCE-CampusInsight) support different secure channels on NBI. Table 6-2 shows which configuration supports what secure channel. Table 6-2 Nouthbound secure channels supported by deployment scenarios Secure Channel Deployment Scenario NCE- Fabric NCE- Campus NCE-WAN NCE- FabricInsi NCE- CampusIn CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 51 ght sight TLS √ √ √ √ √ SNMPv3 √ √ √ √ √ SSH √ √ √  Communication Security between remote users and the TOE: The remote users access NCE through web portal by initiating HTTPS connections. (FTP_TRP.1, FTP_ITC.1/NE, FTP_ITC.1/ External System) The TOE supports communicating with a CA server to apply the certificates. To prevent modification and insertion, the communication uses CMPv2 protocol over an HTTP channel with RSA or ECDSA signature protection of the certificate. (FDP_UIT.1) 6.1.5 User Session Management The TOE provides user session management. The function includes the following functions: 1) Session establishment The session will be established after successful login authentication. When more than three unsuccessful login attempts are detected since the last successful login, The TOE will generate an alarm. The session establishment will be denied based on the policy below (FTA.TSE.1). Upon successful session establishment, the TOE will display the welcome message, last successful login date, time and IP address, last unsuccessful login date, time and IP address, login failure times since last successful login (FTA_TAH.1). 2) TSF-initiated session Termination If a user does not perform any operation within the period of the default value 30 mins) specified by this parameter, the user will be logged out. The setting takes effect only for local and remote users and does not take effect for third-party users. If this parameter is set to Unlimited, user sessions will not be automatically logged off (FTA_SSL.3). 3) User-initiated session termination Login user can click the user name in the upper right corner of the page and choose Logout (FTA_SSL.4). 1. Users and their following security attributes: a. Time segment for login, which means that the user shall log in to the TOE within a specific time segment. b. ACL, addressed in the previous section. c. Maximum online sessions, which indicates that the number of online sessions shall not exceed the maximum sessions, otherwise the user login requests after the maximum online sessions shall be refused by the TOE. The default is none. d. Disabled status, which means the user cannot log in to the TOE in the disabled status. 2. System security policy, which is prior to the security attributes of individual users a. System login mode, which supports the multi-user login mode and single-user login mode. During system operation and maintenance, the single-user mode is recommended to prevent other users from logging in to the system and performing operations that may affect O&M efficiency. When the single-user login mode is selected, the TOE refuses all login requests including those for online sessions except that of the super user admin. The multi-user login mode is a normal mode and has no special limits. 6.1.6 Auditing The TOE can generate audit records for security-relevant events as described in CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 52 FAU_GEN.1. The audit record has the following information: the activity name, level, user ID, operation type, operation date and time, terminal, object, operation result, and details. The audit review can be implemented with filter criteria on the NCE client by users attached to SMManagers, users with log query rights. Any user cannot delete and modify the audit records. Conditions for dumping logs: The number of logs in the database exceeds 1 million, the size of the logs in the database exceeds 80% of the capacity, or the number of days for storing the logs exceeds 45 days. To ensure sufficient database space, the system checks logs every hour and saves logs that meet the requirements to the hard disk of a server. Then the dumped logs are automatically deleted from the database. Conditions for deleting log files: The size of the log files is greater than 1024 MB (default value), the log files are stored for more than 45 days (default value), or the total number of log files exceeds 1000 (default value). To ensure sufficient disk space, the system checks log files every hour and deletes log files meeting the requirements from the hard disk. By default, a maximum of 1 million logs can be stored in the database. If the database space of log management is greater than or equal to 16 GB. The logs that exceed the maximum number of logs stored in the database will be dumped. The values in the preceding log dump conditions are default values. Log service start/stop of the O&M plane will be recorded in audit logs of the management plane. Log service start/stop of the management plane will be recorded in the /var/log/messages directory of the OS. (FAU_GEN.1, FAU_GEN.2, FAU_SAR.1, FAU_SAR.2, FAU_SAR.3, FAU_STG.1, FAU_STG.3) 6.1.7 Security Management Function The TOE provides security management if necessary. Only administrators have the privilege to manage the behaviors of TOE security functions. This is partially already addressed in more details in the previous sections of the TSS. It includes security attributes below. 1. Users and their following security attributes: a. User ID, which is a user identifier, defined as a username in the TOE. b. User Group, which is the same as a role definition. c. Password, which should meet the predefined password policy, is encrypted with PBKDF2 and stored in the database. d. Time segment for login, addressed in the previous section. e. ACL, addressed in the previous section. f. Maximum online sessions, addressed in the previous section. g. Disabled status, addressed in the previous section. 2. System security policy, which is prior to the security attributes of individual users a. System login mode, addressed in the previous section. b. Password policy, which has basic parameters and advanced parameters. Basic parameters include the following items: Min. Length of common user password, Min. Length of super user password, Max. Length of password, Max. Period for password repetition (months), Password validity period (days), Minimum validity period of the password (days), Number of days warning given before password expiry, The Password Cannot Be Similar to History Passwords. Advanced parameters include the following items: Min. Different characters between new and old passwords, Min. Letter, Min. Lowercase, Min. Numbers. Account policy, which has an upper threshold for legal login times and the excessive login attempts cause account locking. Super user admin is not allowed to be locked. All the users should meet the account policy defined in the TOE. CC HUAWEI iMaster NCE V100R019C10 - Security Target 6 TOE Summary Specification Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 53 The TOE restricts the ability to manage the certificates, private keys, and symmetric keys to SMManagers and users with sufficient user permissions. (FMT_MSA.1, FMT_MSA.3, FMT_SMF.1, FMT_MOF.1, FMT_MTD.1) 6.1.8 Cryptographic Functions Cryptographic functions are required by security features as dependencies. The following cryptographic algorithms are supported:1、 1. The TOE supports symmetric encryption and decryption using the AES-128-CBC algorithm to protect sensitive data. (FCS_COP.1/AES). 2. The TOE shall release the cryptographic key memory by overwriting the byte or char array with 0 if the key is no longer used (FCS_CKM.4). 3. The TOE supports a two-layer key management structure of root key + working key. The root key is generated by PBKDF2 (HMACSHA2) algorithm from root key materials. The working key is encrypted and protected by the root key. The working key is used to provide confidential and complete protection for sensitive data saved in a local PC or data transferred through insecure channels. Both the two keys can be updated manually (FCS_CKM.1/AES). 4. The TOE supports hashing of data using PBKDF2 (SHA256) algorithm according to [RFC8018] for password hashing. The iteration number is at least 10,000 times. The salt used in PBKDF2 is a 16-byte random number obtained from the TOE's deterministic random number generator (FCS_COP.1/PBKDF2). CC HUAWEI iMaster NCE V100R019C10 - Security Target 7 Abbreviations, Terminology and References Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 54 7 Abbreviations, Terminology and References 7.1 Abbreviations CC Common Criteria ST Security Target TOE Target of Evaluation TSF TOE Security Functions PP Protection Profile SFR Security Functional Requirement OM Operation and Maintenance NBI Northbound Interface NE Network Element OSS Operations Support System AAA Authentication Authorization Accounting NTP Network Time Protocol BSS Business Support System SBI Southbound Interface SOP Standard Operation Procedure SDN Software-defined Networking CA Certificate Authority CAS Central Authentication Service SSO Single Sign-on CMP Certificate Management Protocol CC HUAWEI iMaster NCE V100R019C10 - Security Target 7 Abbreviations, Terminology and References Issue 1.5 (2021-07-22) Copyright © Huawei Technologies Co., Ltd. 55 SP Service Provider IdP Identity Provider 7.2 Terminology This section contains definitions of technical terms that are used with a meaning specific to this document. Terms defined in the [CC] are not reiterated here, unless stated otherwise. Terminology Explanation Administrator An administrator is a user of the TOE who may have been assigned specific administrative privileges within the TOE. This ST may use the term administrator occasionally in an informal context, and not in order to refer to a specific role definition. From the TOE's point of view, an administrator is simply a user who is authorized to perform certain administrative actions on the TOE and the objects managed by the TOE. Operator See User. User A user is a human or a product/application using the TOE. Access Network In telecommunications, an access network is a network that connects subscribers to telecommunication service providers over public ground. It can be considered the route between the subscriber's home and the ISP itself. The access network is composed of the carrier's station and the end user. OM data Data user for system operation and maintenance. 7.3 References [CC] Common Criteria for Information Technology Security Evaluation. Part 1-3. September 2019. Version 3.1 Revision 5. [CEM] Common Methodology for Information Technology Security Evaluation. September 2012. Version 3.1 Revision 5.