STMicroelectronics SA/SB23YT66/34A Security Target - Public Version Common Criteria for IT security evaluation SMD_Sx23YTxx_ST_09_002 Rev 01.00 January 2010 BLANK January 2010 SMD_Sx23YTxx_ST_09_002 Rev 01.00 3/51 SA/SB23YT66/34A Security Target - Public Version Common Criteria for IT security evaluation 1 Introduction 1.1 Security Target reference 1 Document identification: SA/SB23YT66/34A SECURITY TARGET - PUBLIC VERSION. 2 Version number: Rev 01.00, issued December 2009. 3 Registration: registered at ST Microelectronics under number SMD_Sx23YTxx_ST_09_002_V01.00. 1.2 Purpose 4 This document presents the Security Target - Public version (ST) of the SA23YT66A, SB23YT66A, SA23YT34A, and SB23YT34A, Security Integrated Circuits (IC), with Dedicated Software (DSW) and an embedded cryptographic library, designed on the ST23 platform of STMicroelectronics. 5 This document is a sanitized version of the Security Target used for the evaluation. It is classified as public information. 6 The precise reference of the Target of Evaluation (TOE) and the security IC features are given in Section 3: TOE description. 7 A glossary of terms and abbreviations used in this document is given in Appendix A: Glossary www.st.com Contents SA/SB23YT66/34A Security Target - Public Version 4/51 SMD_Sx23YTxx_ST_09_002 Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Security Target reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3 TOE description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.1 TOE overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.2 TOE life cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.3 TOE environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.3.1 TOE Development Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.3.2 TOE production environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.3.3 TOE operational environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4 Conformance claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.1 Common Criteria conformance claims . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2 PP Claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2.1 PP Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2.2 PP Refinements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2.3 PP Additions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.2.4 PP Claims rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 5 Security problem definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.1 Description of assets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.2 Threats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 5.3 Organisational security policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5.4 Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 6 Security objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 6.1 Security objectives for the TOE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 6.2 Security objectives for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . 23 6.3 Security objectives rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 6.3.1 TOE threat "Memory Access Violation" . . . . . . . . . . . . . . . . . . . . . . . . . 24 SA/SB23YT66/34A Security Target - Public Version Contents SMD_Sx23YTxx_ST_09_002 5/51 6.3.2 Organisational security policy "Additional Specific Security Functionality" 25 7 Security requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 7.1 Security functional requirements for the TOE . . . . . . . . . . . . . . . . . . . . . . 26 7.1.1 Limited fault tolerance (FRU_FLT.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 7.1.2 Failure with preservation of secure state (FPT_FLS.1) . . . . . . . . . . . . . 27 7.1.3 Limited capabilities (FMT_LIM.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 7.1.4 Limited availability (FMT_LIM.2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 7.1.5 Audit storage (FAU_SAS.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 7.1.6 Resistance to physical attack (FPT_PHP.3) . . . . . . . . . . . . . . . . . . . . . . 28 7.1.7 Basic internal transfer protection (FDP_ITT.1) . . . . . . . . . . . . . . . . . . . . 28 7.1.8 Basic internal TSF data transfer protection (FPT_ITT.1) . . . . . . . . . . . . 28 7.1.9 Subset information flow control (FDP_IFC.1) . . . . . . . . . . . . . . . . . . . . 29 7.1.10 Random number generation (FCS_RNG.1) . . . . . . . . . . . . . . . . . . . . . . 29 7.1.11 Cryptographic operation (FCS_COP.1) . . . . . . . . . . . . . . . . . . . . . . . . . 29 7.1.12 Cryptographic key generation (FCS_CKM.1) . . . . . . . . . . . . . . . . . . . . 30 7.1.13 Static attribute initialisation (FMT_MSA.3) . . . . . . . . . . . . . . . . . . . . . . . 30 7.1.14 Management of security attributes (FMT_MSA.1) . . . . . . . . . . . . . . . . . 31 7.1.15 Complete access control (FDP_ACC.2) . . . . . . . . . . . . . . . . . . . . . . . . 31 7.1.16 Security attribute based access control (FDP_ACF.1) . . . . . . . . . . . . . . 31 7.2 TOE security assurance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 7.3 Refinement of the security assurance requirements . . . . . . . . . . . . . . . . 32 7.3.1 Refinement regarding functional specification (ADV_FSP) . . . . . . . . . . 33 7.3.2 Refinement regarding test coverage (ATE_COV) . . . . . . . . . . . . . . . . . 34 7.4 Security Requirements rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 7.4.1 Rationale for the Security Functional Requirements . . . . . . . . . . . . . . . 34 7.4.2 Additional security objectives are suitably addressed . . . . . . . . . . . . . . 35 7.4.3 Additional security requirements are consistent . . . . . . . . . . . . . . . . . . 36 7.4.4 Dependencies of Security Functional Requirements . . . . . . . . . . . . . . . 36 7.4.5 Rationale for the Assurance Requirements . . . . . . . . . . . . . . . . . . . . . . 37 8 TOE summary specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 8.1 Statement of TOE security functionality . . . . . . . . . . . . . . . . . . . . . . . . . . 39 8.1.1 TSF_INIT_A: Hardware initialisation & TOE attribute initialisation . . . . 39 8.1.2 TSF_CONFIG_A: TOE configuration switching and control . . . . . . . . . 39 8.1.3 TSF_INT_A: TOE logical integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Contents SA/SB23YT66/34A Security Target - Public Version 6/51 SMD_Sx23YTxx_ST_09_002 8.1.4 TSF_TEST_A: Test of the TOE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 8.1.5 TSF_FWL_A: Memory Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 8.1.6 TSF_PHT_A: Physical tampering protection . . . . . . . . . . . . . . . . . . . . . 40 8.1.7 TSF_ADMINIS_A: Security violation administrator . . . . . . . . . . . . . . . . 40 8.1.8 TSF_OBS_A: Unobservability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 8.1.9 TSF_SKCS_A: Symmetric Key Cryptography Support . . . . . . . . . . . . . 41 8.1.10 TSF_AKCS_A: Asymmetric Key Cryptography Support . . . . . . . . . . . . 41 8.1.11 TSF_ALEAS_A: Unpredictable Number Generation Support . . . . . . . . 42 8.2 TOE summary specification rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 8.2.1 TSF rationale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 9 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Appendix A Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 A.1 Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 A.2 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 SA/SB23YT66/34A Security Target - Public Version List of tables SMD_Sx23YTxx_ST_09_002 7/51 List of tables Table 1. Products of the TOE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Table 2. Composite product life cycle phases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Table 3. Summary of security environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Table 4. Summary of security objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Table 5. Security Objectives versus Assumptions, Threats or Policies . . . . . . . . . . . . . . . . . . . . . . 24 Table 6. Summary of functional security requirements for the TOE . . . . . . . . . . . . . . . . . . . . . . . . . 26 Table 7. FCS_COP.1 iterations (cryptographic operations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Table 8. FCS_CKM.1 iterations (cryptographic key generation). . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Table 9. TOE security assurance requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Table 10. Impact of EAL5 selection on BSI-PP-0035 refinements . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Table 11. Dependencies of security functional requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Table 12. Mapping of TSF services and SFRs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Table 13. List of abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Table 14. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 List of figures SA/SB23YT66/34A Security Target - Public Version 8/51 SMD_Sx23YTxx_ST_09_002 List of figures Figure 1. Sx23YT66A block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Figure 2. Sx23YT34A block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SA/SB23YT66/34A Security Target - Public Version Context SMD_Sx23YTxx_ST_09_002 9/51 2 Context 8 The Target of Evaluation (TOE) referred to in Section 3: TOE description, is evaluated under the French IT Security Evaluation and Certification Scheme and is developed by the Smartcard Division of STMicroelectronics (ST). 9 The Target of Evaluation (TOE) comprises the SA23YT66A, SB23YT66A, SA23YT34A, and SB23YT34A. 10 The assurance level of the performed Common Criteria (CC) IT Security Evaluation is EAL 5 augmented. 11 The intent of this Security Target is to specify the Security Functional Requirements (SFRs) and Security Assurance Requirements (SARs) applicable to the SA23YT66A, SB23YT66A, SA23YT34A, and SB23YT34A security ICs, and to summarise their chosen TSF services and assurance measures. 12 This ST claims to be an instantiation of the "Security IC Platform Protection Profile" (PP) registered and certified under the reference BSI-PP-0035 in the German IT Security Evaluation and Certification Scheme, with the following augmentations: ● Addition #1: “Support of Cipher Schemes” from AUG ● Addition #4: “Area based Memory Access Control” from AUG The original text of this PP is typeset as indicated here, its augmentations from AUG as indicated here, when they are reproduced in this document. 13 Extensions introduced in this ST to the SFRs of the Protection Profile (PP) are exclusively drawn from the Common Criteria part 2 standard SFRs. 14 This ST makes various refinements to the above mentioned PP and AUG. They are all properly identified in the text typeset as indicated here. The original text of the PP is repeated as scarcely as possible in this document for reading convenience. All PP identifiers have been however prefixed by their respective origin label: BSI for BSI-PP-0035, AUG1 for Addition #1 of AUG and AUG4 for Addition #4 of AUG. TOE description SA/SB23YT66/34A Security Target - Public Version 10/51 SMD_Sx23YTxx_ST_09_002 3 TOE description 3.1 TOE overview 15 The Target of Evaluation (TOE) comprises four products: the SA23YT66A, SB23YT66A, SA23YT34A, and SB23YT34A. All those products share the same hardware design, and the same maskset. The different derivates differ only on the available memories size, on the available I/Os, and on the associated cryptographic library, as detailed here below: 16 The different products can be distinguished by their product identification number, included in the traceability number, as detailed in their Data Sheets. 17 In this Security Target, the terms: ● "TOE" or "Sx23YTxx" or "SA/SB23YT66/34A" mean all 4 products, ● "Sx23YT66" means the subset of products SA23YT66A / SB23YT66A, ● "Sx23YT34" means the subset of products SA23YT34A / SB23YT34A, ● "SA23YTxx" means the subset of products SA23YT66A / SA23YT34A. ● "SB23YTxx" means the subset of products SB23YT66A / SB23YT34A. 18 The TOE comprises two possible versions of Neslib, a SA and a SB version. 19 The rest of this document applies to all products, except when a particular mention to one of the products or one of the subsets is added. For easier reading, the restrictions corresponding to a particular product or subset are typeset as indicated here. 20 The SA23YT66A and SB23YT66A are directly derived from the ST23YT66A by the addition of a public key cryptographic library named Neslib SA for the SA23YT66A, Neslib SB for the SB23YT66A. 21 The SA23YT34A and SB23YT34A are directly derived from the ST23YT34A by the addition of a public key cryptographic library named Neslib SA for the SA23YT34A, Neslib SB for the SB23YT34A. 22 The TOE is a serial access Smartcard IC based on the enhanced 8/16-bit ST23 CPU core, with 66 Kbytes EEPROM for the Sx23YT66 / 34 Kbytes EEPROM for the Sx23YT34, an internally generated clock, an MPU, an internal True Random Number Generator (TRNG) and accelerators dedicated to cryptographic algorithms. 23 Operations are synchronized with an internally generated clock issued by the Clock Generator module. The internal speed of the device is fully software programmable. High performance can be reached by using high speed internal clock frequency (up to 29 MHz). The CPU interfaces with the on-chip RAM, ROM and EEPROM memories via an internal Table 1. Products of the TOE Product name EEPROM size User RAM size User ROM size Number of pins Crypto library Identification number SA23YT66A 66 KBytes 6.2 KBytes 210 KBytes 20 Neslib SA 2.0 B410h SB23YT66A 66 KBytes 6.2 KBytes 210 KBytes 20 Neslib SB 2.0 B410h SA23YT34A 34 KBytes 5 KBytes 110 KBytes 8 Neslib SA 2.0 B408h SB23YT34A 34 KBytes 5 KBytes 110 KBytes 8 Neslib SB 2.0 B408h SA/SB23YT66/34A Security Target - Public Version TOE description SMD_Sx23YTxx_ST_09_002 11/51 bus offering 16 MBytes of linear addressing space, protected by the memory protection unit (MPU) without performance loss. 24 The CPU includes the Arithmetic Logic Unit (ALU) and the control logic. This device includes a flexible memory protection unit (MPU), which enables a fully dynamic memory segmentation and protection without downgrading the CPU performance. The MPU enables the software to control the addressable space and registers available to any given program, thanks to a flexible and software-friendly interface. As a result, the MPU allows the software developers to enforce a wide range of memory protection policies. The E-DES (Enhanced DES) module supports efficiently the Data Encryption Standard (DES [2]) with built-in coutermeasures against side channel attacks. Additionally, an extra feature allows fast implementation of CBC and CBC-MAC modes [10] [9]. The NESCRYPT (NExt Step CRYPTo-processor) is the latest generation of ST cryptographic accelerator providing native modular arithmetic for both GF(p) and GF(2n ) with a very high level of performance. NESCRYPT also includes dedicated instructions to accelerate SHA-1 and SHA-2 family hash functions. NESCRYPT allows efficient and secure implementation of almost all known public key cryptosystems with a high level of performance ([4], [8], [12], [18],[19], [20], [21]). As randomness is a key stone in many applications, the SA/SB23YT66/34A features a highly reliable True Random Number Generator (TRNG), compliant with P2 Class of AIS-31 [1] and directly accessible through dedicated registers. 25 In a few words, the SA/SB23YT66/34A offer a unique combination of high performances and very powerful features for high level security: ● Die integrity, ● Monitoring of environmental parameters, ● Protection mechanisms against faults, ● Hardware Security Enhanced DES accelerator, ● AIS-31 class P2 compliant True Random Number Generator, ● ISO 3309 CRC calculation block, ● Memory Protection Unit, ● NExt Step CRYPTography accelerator (NESCRYPT). 26 The TOE includes in the ST protected ROM a Dedicated Software which provides full test capabilities (operating system for test, called “OST”), not accessible by the Security IC Embedded SoftWare (SICESW), after delivery. 27 The SA23YTxx comprises a specific application in User ROM: this applicative Embedded Software is a cryptographic library called Neslib SA. Neslib SA is a cutting edge cryptographic library in terms of security and performance. Neslib SA provides the most commonly used operations in public key algorithms and protocols: ● an asymmetric key cryptographic support module, supporting secure modular arithmetic with large integers, with specialized functions for Rivest, Shamir & Adleman Standard cryptographic algorithm (RSA [20]), ● an asymmetric key cryptographic support module that provides secure hash functions (SHA-1, SHA-224 and SHA-256 [4]). 28 The SB23YTxx comprises a specific application in User ROM: this applicative Embedded Software is a cryptographic library called Neslib SB. Neslib SB is a cutting edge TOE description SA/SB23YT66/34A Security Target - Public Version 12/51 SMD_Sx23YTxx_ST_09_002 cryptographic library in terms of security and performance. Neslib SB provides the most useful operations in public key algorithms and protocols: ● an asymmetric key cryptographic support module, supporting secure modular arithmetic with large integers, with specialized functions for Rivest, Shamir & Adleman Standard cryptographic algorithm (RSA [20]), ● a symmetric key cryptographic support module whose base algorithm is the Advanced Encryption Standard cryptographic algorithm (AES [7]), ● an asymmetric key cryptographic support module that provides very efficient basic functions to build up protocols using Elliptic Curves Cryptography on prime fields GF(p) [18], ● an asymmetric key cryptographic support module that provides secure hash functions (SHA-1, SHA-224 and SHA-256 [4]). 29 In addition, the ROM of the tested samples contains an operating system called “Card Manager” that allows the evaluators to use a set of commands with the I/O, and to load in EEPROM (or in RAM) test softwares. 30 Figure 1 provides an overview of the Sx23YT66A. Figure 1. Sx23YT66A block diagram 31 Figure 2 provides an overview of the Sx23YT34A. SA/SB23YT66/34A Security Target - Public Version TOE description SMD_Sx23YTxx_ST_09_002 13/51 Figure 2. Sx23YT34A block diagram 3.2 TOE life cycle 32 This Security Target is fully conform to the claimed PP. In the following, just a summary and some useful explanations are given. For complete details on the TOE life cycle, please refer to the Security IC Platform Protection Profile (BSI-PP-0035), section 1.2.3. 33 The composite product life cycle is decomposed into 7 phases. Each of these phases has the very same boundaries as those defined in the claimed protection profile. 34 The life cycle phases are summarized in Table 2. 35 The limit of the evaluation corresponds to phases 2 and 3, including the delivery and verification procedures of phase 1, and the TOE delivery to the IC packaging manufacturer ; procedures corresponding to phases 1, 4, 5, 6 and 7 are outside the scope of this evaluation. 36 The TOE Manufacturer, as defined in [BSI-PP-0035], is STMicroelectronics. 37 In the following, the term "TOE delivery" is uniquely used to indicate after phase 3 (or before phase 4). The TOE is delivered after phase 3, in USER configuration. Table 2. Composite product life cycle phases Phase Name Description Responsible party 1 IC embedded software development Security IC embedded software development IC embedded software developer 2 IC development IC design IC dedicated software development IC developer: ST TOE description SA/SB23YT66/34A Security Target - Public Version 14/51 SMD_Sx23YTxx_ST_09_002 3.3 TOE environment 38 Considering the TOE, three types of environments are defined: ● Development environment corresponding to phase 2, ● Production environment corresponding to phase 3, ● Operational environment, including phase 1 and from phase 4 to phase 7. 3.3.1 TOE Development Environment 39 To ensure security, the environment in which the development takes place is secured with controllable accesses having traceability. Furthermore, all authorised personnel involved fully understand the importance and the strict implementation of defined security procedures. 40 The development begins with the TOE's specification. All parties in contact with sensitive information are required to abide by Non-Disclosure Agreements. 41 Design and development of the IC then follows, together with the dedicated and engineering software and tools development. The engineers use secure computer systems (preventing unauthorised access) to make their developments, simulations, verifications and generation of the TOE's databases. Sensitive documents, files and tools, databases on tapes, and printed circuit layout information are stored in appropriate locked cupboards/safe. Of paramount importance also is the disposal of unwanted data (complete electronic erasures) and documents (e.g. shredding). 42 The development centres involved in the development of the TOE are the following: ST ROUSSET and ST ANG MO KIO, for the design activities, ST ROUSSET, for the engineering activities, ST ROUSSET and ST ZAVENTEM for the software development activities. 43 Reticules and photomasks are generated from the verified IC databases; the former are used in the silicon Wafer-fab processing. As reticules and photomasks are generated off- site, they are transported and worked on in a secure environment with accountability and 3 IC manufacturing integration and photomask fabrication IC production IC testing preparation pre-personalisation IC manufacturer: ST 4 IC packaging security IC packaging (and testing) pre-personalisation if necessary IC packaging manufacturer 5 Composite product integration composite product finishing process composite product preparation composite product shipping Composite product integrator 6 Personalisation composite product personalisation composite product testing Personaliser 7 Operational usage composite product usage by its issuers and consumers End-consumer Table 2. Composite product life cycle phases (continued) Phase Name Description Responsible party SA/SB23YT66/34A Security Target - Public Version TOE description SMD_Sx23YTxx_ST_09_002 15/51 traceability of all (good and bad) products. During the transfer of sensitive data electronically, procedures are established to ensure that the data arrive only at the destination and are not accessible at intermediate stages (e.g. stored on a buffer server where system administrators make backup copies). 44 The authorized sub-contractors involved in the TOE mask manufacturing can be DNP JAPAN and DPE ITALY. 3.3.2 TOE production environment 45 As high volumes of product commonly go through such environments, adequate control procedures are necessary to account for all product at all stages of production. 46 Production starts within the Wafer-fab; here the silicon wafers undergo the diffusion processing. Computer tracking at wafer level throughout the process is commonplace. The wafers are then taken into the test area. Testing of each TOE occurs to assure conformance with the device specification. The wafers are then delivered for assembly onto the composite products. 47 The authorized front-end plant involved in the manufacturing of the TOE is ST ROUSSET. 48 The authorized EWS plant involved in the testing of the TOE is ST ROUSSET. 3.3.3 TOE operational environment 49 A TOE operational environment is the environment of phases 1, then 4 to 7. 50 At phases 1, 4, 5 and 6, the TOE operational environment is a controlled environment. 51 End-user environments (phase 7): composite products are used in a wide range of applications to assure authorised conditional access. Examples of such are pay-TV, banking cards, portable communication SIM cards, health cards, transportation cards, identity and passport cards. The end-user environment therefore covers a wide range of very different functions, thus making it difficult to avoid and monitor any abuse of the TOE. Conformance claims SA/SB23YT66/34A Security Target - Public Version 16/51 SMD_Sx23YTxx_ST_09_002 4 Conformance claims 4.1 Common Criteria conformance claims 52 The SA/SB23YT66/34A Security Target claims to be conformant to the Common Criteria version 3.1. 53 Furthermore it claims to be CC Part 2 (CCMB-2007-09-002) extended and CC Part 3 (CCMB-2007-09-003) conformant. The extended Security Functional Requirements are those defined in the Security IC Platform Protection Profile (BSI-PP-0035). 54 The assurance level for the SA/SB23YT66/34A Security Target is EAL 5 augmented by ALC_DVS.2 and AVA_VAN.5. 4.2 PP Claims 4.2.1 PP Reference 55 The SA/SB23YT66/34A Security Target claims strict conformance to the Security IC Platform Protection Profile (BSI-PP-0035), as required by this Protection Profile. 4.2.2 PP Refinements 56 The main refinements operated on the BSI-PP-0035 are: ● Addition #1: “Support of Cipher Schemes” from AUG, ● Addition #4: “Area based Memory Access Control” from AUG, ● Refinement of assurance requirements. 57 All refinements are indicated with type setting text as indicated here, original text from the BSI-PP-0035 being typeset as indicated here. Text originating in AUG is typeset as indicated here. 4.2.3 PP Additions 58 The security environment additions relative to the PP are summarized in Table 3. 59 The additional security objectives relative to the PP are summarized in Table 4. 60 A simplified presentation of the TOE Security Policy (TSP) is added. 61 The additional SFRs for the TOE relative to the PP are summarized in Table 6. 62 The additional SARs relative to the PP are summarized in Table 9. 4.2.4 PP Claims rationale 63 The differences between this Security Target security objectives and requirements and those of BSI-PP-0035, to which conformance is claimed, have been identified and justified in Section 6 and in Section 7. They have been recalled in the previous section. 64 In the following, the statements of the security problem definition, the security objectives, and the security requirements are consistent with those of the BSI-PP-0035. SA/SB23YT66/34A Security Target - Public Version Conformance claims SMD_Sx23YTxx_ST_09_002 17/51 65 The security problem definition presented in Section 5, clearly shows the additions to the security problem statement of the PP. 66 The security objectives rationale presented in Section 6.3 clearly identifies modifications and additions made to the rationale presented in the BSI-PP-0035. 67 Similarly, the security requirements rationale presented in Section 7.4 has been updated with respect to the protection profile. 68 All PP requirements have been shown to be satisfied in the extended set of requirements whose completeness, consistency and soundness has been argued in the rationale sections of the present document. Security problem definition SA/SB23YT66/34A Security Target - Public Version 18/51 SMD_Sx23YTxx_ST_09_002 5 Security problem definition 69 This section describes the security aspects of the environment in which the TOE is intended to be used and addresses the description of the assets to be protected, the threats, the organisational security policies and the assumptions. 70 This Security Target being fully conform to the claimed PP, in the following, just a summary and some useful explanations are given. For complete details on the security problem definition please refer to the Security IC Platform Protection Profile (BSI-PP-0035), section 3. 71 A summary of all these security aspects and their respective conditions is provided in Table 3. 5.1 Description of assets 72 The assets (related to standard functionality) to be protected are: ● the User Data, ● the Security IC Embedded Software, stored and in operation, ● the security services provided by the TOE for the Security IC Embedded Software. 73 The user (consumer) of the TOE places value upon the assets related to high-level security concerns: SC1 integrity of User Data and of the Security IC Embedded Software (while being executed/processed and while being stored in the TOE's memories), SC2 confidentiality of User Data and of the Security IC Embedded Software (while being processed and while being stored in the TOE's memories) SC3 correct operation of the security services provided by the TOE for the Security IC Embedded Software. 74 According to the Protection Profile there is the following high-level security concern related to security service: SC4 deficiency of random numbers. 75 To be able to protect these assets the TOE shall protect its security functionality. Therefore critical information about the TOE shall be protected. Critical information includes: ● logical design data, physical design data, IC Dedicated Software, and configuration data, ● Initialisation Data and Pre-personalisation Data, specific development aids, test and characterisation related data, material for software development support, and photomasks. Such information and the ability to perform manipulations assist in threatening the above assets. SA/SB23YT66/34A Security Target - Public Version Security problem definition SMD_Sx23YTxx_ST_09_002 19/51 76 The information and material produced and/or processed by ST in the TOE development and production environment (Phases 2 to 3) can be grouped as follows: ● logical design data, ● physical design data, ● IC Dedicated Software, Security IC Embedded Software, Initialisation Data and pre- personalisation Data, ● specific development aids, ● test and characterisation related data, ● material for software development support, and ● photomasks and products in any form as long as they are generated, stored, or processed by ST. 5.2 Threats 77 The threats are described in the BSI-PP-0035, section 3.2. Only those originating in AUG are detailed in the following section. Table 3. Summary of security environment Label Title TOE threats BSI.T.Leak-Inherent Inherent Information Leakage BSI.T.Phys-Probing Physical Probing BSI.T.Malfunction Malfunction due to Environmental Stress BSI.T.Phys-Manipulation Physical Manipulation BSI.T.Leak-Forced Forced Information Leakage BSI.T.Abuse-Func Abuse of Functionality BSI.T.RND Deficiency of Random Numbers AUG4.T.Mem-Access Memory Access Violation OSPs BSI.P.Process-TOE Protection during TOE Development and Production AUG1.P.Add-Functions Additional Specific Security Functionality (Cipher Scheme Support) Assumptions BSI.A.Process-Sec-IC Protection during Packaging, Finishing and Personalisation BSI.A.Plat-Appl Usage of Hardware Platform BSI.A.Resp-Appl Treatment of User Data BSI.T.Leak-Inherent Inherent Information Leakage BSI.T.Phys-Probing Physical Probing BSI.T.Malfunction Malfunction due to Environmental Stress BSI.T.Phys-Manipulation Physical Manipulation BSI.T.Leak-Forced Forced Information Leakage BSI.T.Abuse-Func Abuse of Functionality Security problem definition SA/SB23YT66/34A Security Target - Public Version 20/51 SMD_Sx23YTxx_ST_09_002 5.3 Organisational security policies 78 The TOE provides specific security functionality that can be used by the Security IC Embedded Software. In the following specific security functionality is listed which is not derived from threats identified for the TOE’s environment because it can only be decided in the context of the Security IC application, against which threats the Security IC Embedded Software will use the specific security functionality. 79 ST applies the Protection policy during TOE Development and Production (BSI.P.Process- TOE) as specified below. 80 ST applies the Additional Specific Security Functionality policy (AUG1.P.Add-Functions) as specified below. 81 No other Organisational Security Policy (OSP) has been defined in this ST since their specifications depend heavily on the applications in which the TOE will be integrated. The Security Targets for the applications embedded in this TOE should further define them. BSI.T.RND Deficiency of Random Numbers AUG4.T.Mem-Access Memory Access Violation: Parts of the Security IC Embedded Software may cause security violations by accidentally or deliberately accessing restricted data (which may include code). Any restrictions are defined by the security policy of the specific application context and must be implemented by the Security IC Embedded Software. Clarification: This threat does not address the proper definition and management of the security rules implemented by the Security IC Embedded Software, this being a software design and correctness issue. This threat addresses the reliability of the abstract machine targeted by the software implementation. To avert the threat, the set of access rules provided by this TOE should be undefeated if operated according to the provided guidance. The threat is not realized if the Security IC Embedded Software is designed or implemented to grant access to restricted information. It is realized if an implemented access denial is granted under unexpected conditions or if the execution machinery does not effectively control a controlled access. Here the attacker is expected to (i) take advantage of flaws in the design and/or the implementation of the TOE memory access rules (refer to BSI.T.Abuse-Func but for functions available after TOE delivery), (ii) introduce flaws by forcing operational conditions (refer to BSI.T.Malfunction) and/or by physical manipulation (refer to BSI.T.Phys- Manipulation). This attacker is expected to have a high level potential of attack. BSI.P.Process-TOE Protection during TOE Development and Production: An accurate identification is established for the TOE. This requires that each instantiation of the TOE carries this unique identification. SA/SB23YT66/34A Security Target - Public Version Security problem definition SMD_Sx23YTxx_ST_09_002 21/51 5.4 Assumptions 82 The assumptions are described in the BSI-PP-0035, section 3.4. AUG1.P.Add-Functions Additional Specific Security Functionality: The TOE shall provide the following specific security functionality to the Security IC Embedded Software: – Data Encryption Standard (DES), – Triple Data Encryption Standard (3DES), – Advanced Encryption Standard (AES), for SB23YTxx only, – Elliptic Curves Cryptography on GF(p), for SB23YTxx only, – Secure Hashing (SHA-1, SHA-224, SHA-256), – Rivest-Shamir-Adleman (RSA), – Prime Number Generation. Note that DES is no longer recommended as an encryption function in the context of smart card applications. Hence, Security IC Embedded Software may need to use triple DES to achieve a suitable strength. BSI.A.Process-Sec-IC Protection during Packaging, Finishing and Personalisation BSI.A.Plat-Appl Usage of Hardware Platform BSI.A.Resp-Appl Treatment of User Data Security objectives SA/SB23YT66/34A Security Target - Public Version 22/51 SMD_Sx23YTxx_ST_09_002 6 Security objectives 83 The security objectives of the TOE cover principally the following aspects: ● integrity and confidentiality of assets, ● protection of the TOE and associated documentation during development and production phases, ● provide random numbers, ● provide cryptographic support and access control functionality. 84 A summary of all security objectives is provided in Table 4. Note that the origin of each objective is clearly identified in the prefix of its label. 85 Most of these security aspects can therefore be easily found in the protection profile. Only those originating in AUG are detailed in the following sections. 6.1 Security objectives for the TOE Table 4. Summary of security objectives Label Title TOE BSI.O.Leak-Inherent Protection against Inherent Information Leakage BSI.O.Phys-Probing Protection against Physical Probing BSI.O.Malfunction Protection against Malfunctions BSI.O.Phys-Manipulation Protection against Physical Manipulation BSI.O.Leak-Forced Protection against Forced Information Leakage BSI.O.Abuse-Func Protection against Abuse of Functionality BSI.O.Identification TOE Identification BSI.O.RND Random Numbers AUG1.O.Add-Functions Additional Specific Security Functionality AUG4.O.Mem Access Dynamic Area based Memory Access Control Environments BSI.OE.Plat-Appl Usage of Hardware Platform BSI.OE.Resp-Appl Treatment of User Data BSI.OE.Process-Sec-IC Protection during composite product manufacturing BSI.O.Leak-Inherent Protection against Inherent Information Leakage BSI.O.Phys-Probing Protection against Physical Probing BSI.O.Malfunction Protection against Malfunctions BSI.O.Phys-Manipulation Protection against Physical Manipulation BSI.O.Leak-Forced Protection against Forced Information Leakage BSI.O.Abuse-Func Protection against Abuse of Functionality SA/SB23YT66/34A Security Target - Public Version Security objectives SMD_Sx23YTxx_ST_09_002 23/51 6.2 Security objectives for the environment 86 Security Objectives for the Security IC Embedded Software development environment (phase 1): 87 Security Objectives for the operational Environment (phase 4 up to 6): 6.3 Security objectives rationale 88 The main line of this rationale is that the inclusion of all the security objectives of the BSI- PP-0035 protection profile, together with those in AUG, guarantees that all the security environment aspects identified in Section 5 are addressed by the security objectives stated in this chapter. 89 Thus, it is necessary to show that: ● security environment aspects from AUG are addressed by security objectives stated in this chapter, ● security objectives from AUG are suitable (i.e. they address security environment aspects), ● security objectives from AUG are consistent with the other security objectives stated in this chapter (i.e. no contradictions). BSI.O.Identification TOE Identification BSI.O.RND Random Numbers AUG1.O.Add-Functions Additional Specific Security Functionality: The TOE must provide the following specific security functionality to the Security IC Embedded Software: – Data Encryption Standard (DES), – Triple Data Encryption Standard (3DES), – Advanced Encryption Standard (AES), for SB23YTxx only, – Elliptic Curves Cryptography on GF(p), for SB23YTxx only, – Secure Hashing (SHA-1, SHA-224, SHA-256), – Rivest-Shamir-Adleman (RSA), – Prime Number Generation. AUG4.O.Mem Access Dynamic Area based Memory Access Control: The TOE must provide the Security IC Embedded Software with the capability to define dynamic memory segmentation and protection. The TOE must then enforce the defined access rules so that access of software to memory areas is controlled as required, for example, in a multi-application environment. BSI.OE.Plat-Appl Usage of Hardware Platform BSI.OE.Resp-Appl Treatment of User Data BSI.OE.Process-Sec-IC Protection during composite product manufacturing Security objectives SA/SB23YT66/34A Security Target - Public Version 24/51 SMD_Sx23YTxx_ST_09_002 90 The selected augmentations from AUG introduce the following security environment aspects: ● TOE threat "Memory Access Violation, (AUG4.T.Mem-Access)", ● organisational security policy "Additional Specific Security Functionality, (AUG1.P.Add- Functions)". 91 As required by CC Part 1 (CCMB-2006-09-001), no assumption nor objective for the environment has been added to those of the BSI-PP-0035 Protection Profile to which strict conformance is claimed. 92 The justification of the additional policy and the additional threat provided in the next subsections shows that they do not contradict to the rationale already given in the protection profile BSI-PP-0035 for the assumptions, policy and threats defined there. 6.3.1 TOE threat "Memory Access Violation" 93 The justification related to the threat “Memory Access Violation, (AUG4.T.Mem-Access)” is as follows: 94 According to AUG4.O.Mem Access the TOE must enforce the dynamic memory segmentation and protection so that access of software to memory areas is controlled. Any restrictions are to be defined by the Security IC Embedded Software. Thereby security violations caused by accidental or deliberate access to restricted data (which may include code) can be prevented (refer to AUG4.T.Mem-Access). The threat AUG4.T.Mem-Access is therefore removed if the objective is met. 95 The added objective for the TOE AUG4.O.Mem Access does not introduce any contradiction in the security objectives for the TOE. Table 5. Security Objectives versus Assumptions, Threats or Policies Assumption, Threat or Organisational Security Policy Security Objective Notes BSI.A.Plat-Appl BSI.OE.Plat-Appl Phase 1 BSI.A.Resp-Appl BSI.OE.Resp-Appl Phase 1 BSI.P.Process-TOE BSI.O.Identification Phase 2-3 BSI.A.Process-Sec-IC BSI.OE.Process-Sec-IC Phase 4-6 BSI.T.Leak-Inherent BSI.O.Leak-Inherent BSI.T.Phys-Probing BSI.O.Phys-Probing BSI.T.Malfunction BSI.O.Malfunction BSI.T.Phys-Manipulation BSI.O.Phys-Manipulation BSI.T.Leak-Forced BSI.O.Leak-Forced BSI.T.Abuse-Func BSI.O.Abuse-Func BSI.T.RND BSI.O.RND AUG1.P.Add-Functions AUG1.O.Add-Functions AUG4.T.Mem-Access AUG4.O.Mem Access SA/SB23YT66/34A Security Target - Public Version Security objectives SMD_Sx23YTxx_ST_09_002 25/51 6.3.2 Organisational security policy "Additional Specific Security Functionality" 96 The justification related to the organisational security policy "Additional Specific Security Functionality, (AUG1.P.Add-Functions)” is as follows: 97 Since AUG1.O.Add-Functions requires the TOE to implement exactly the same specific security functionality as required by AUG1.P.Add-Functions, and in the very same conditions, the organisational security policy is covered by the objective. 98 Nevertheless the security objectives BSI.O.Leak-Inherent, BSI.O.Phys-Probing, , BSI.O.Malfunction, BSI.O.Phys-Manipulation and BSI.O.Leak-Forced define how to implement the specific security functionality required by AUG1.P.Add-Functions. (Note that these objectives support that the specific security functionality is provided in a secure way as expected from AUG1.P.Add-Functions.) Especially BSI.O.Leak-Inherent and BSI.O.Leak- Forced refer to the protection of confidential data (User Data or TSF data) in general. User Data are also processed by the specific security functionality required by AUG1.P.Add- Functions. 99 The added objective for the TOE AUG1.O.Add-Functions does not introduce any contradiction in the security objectives for the TOE. Security requirements SA/SB23YT66/34A Security Target - Public Version 26/51 SMD_Sx23YTxx_ST_09_002 7 Security requirements 100 This chapter on security requirements contains a section on security functional requirements (SFRs) for the TOE (Section 7.1), a section on security assurance requirements (SARs) for the TOE (Section 7.2), a section on the refinements of these SARs (Section 7.3) as required by the "BSI-PP-0035" Protection Profile. This chapter includes a section with the security requirements rationale (Section 7.4). 7.1 Security functional requirements for the TOE 101 Security Functional Requirements (SFRs) from the "BSI-PP-0035" Protection Profile (PP) are drawn from CCMB-2007-09-002, except the following SFRs, that are extensions to CCMB-2007-09-002: ● FCS_RNG Generation of random numbers, ● FMT_LIM Limited capabilities and availability, ● FAU_SAS Audit data storage. The reader can find their certified definitions in the text of the "BSI-PP-0035" Protection Profile. 102 All extensions to the SFRs of the "BSI-PP-0035" Protection Profiles (PPs) are exclusively drawn from CCMB-2007-09-002. 103 All iterations, assignments, selections, or refinements on SFRs have been performed according to section C.4 of CCMB-2006-09-001. They are easily identified in the following text as they appear as indicated here. Note that in order to improve readability, iterations are sometimes expressed within tables. 104 In order to ease the definition and the understanding of these security functional requirements, a simplified presentation of the TOE Security Policy (TSP) is given in the following section. 105 The selected security functional requirements for the TOE, their respective origin and type are summarized in Table 6. Table 6. Summary of functional security requirements for the TOE Label Title Addressing Origin Type FRU_FLT.2 Limited fault tolerance Malfunction BSI-PP-0035 CCMB-2007-09-002 FPT_FLS.1 Failure with preservation of secure state FMT_LIM.1 Limited capabilities Abuse of functionality BSI-PP-0035 Extended FMT_LIM.2 Limited availability FAU_SAS.1 Audit storage Lack of TOE identification BSI-PP-0035 Operated SA/SB23YT66/34A Security Target - Public Version Security requirements SMD_Sx23YTxx_ST_09_002 27/51 7.1.1 Limited fault tolerance (FRU_FLT.2) 106 The TSF shall ensure the operation of all the TOE’s capabilities when the following failures occur: exposure to operating conditions which are not detected according to the requirement Failure with preservation of secure state (FPT_FLS.1). 7.1.2 Failure with preservation of secure state (FPT_FLS.1) 107 The TSF shall preserve a secure state when the following types of failures occur: exposure to operating conditions which may not be tolerated according to the requirement Limited fault tolerance (FRU_FLT.2) and where therefore a malfunction could occur. 108 Refinement: The term “failure” above also covers “circumstances”. The TOE prevents failures for the “circumstances” defined above. Regarding application note 15 of BSI-PP-0035, the TOE provides information on the operating conditions monitored during Security IC Embedded Software execution and after a warm reset. No audit requirement is however selected in this Security Target. FPT_PHP.3 Resistance to physical attack Physical manipulation & probing BSI-PP-0035 CCMB-2007-09-002 FDP_ITT.1 Basic internal transfer protection Leakage FPT_ITT.1 Basic internal TSF data transfer protection FDP_IFC.1 Subset information flow control FCS_RNG.1 Random number generation Weak cryptographic quality of random numbers BSI-PP-0035 Operated Extended FCS_COP.1 Cryptographic operation Cipher scheme support AUG #1 Operated CCMB-2007-09-002 FCS_CKM.1 Cryptographic key generation Security Target Operated FDP_ACC.2 Complete access control Memory access violation Security Target Operated FDP_ACF.1 Security attribute based access control AUG #4 Operated FMT_MSA.3 Static attribute initialisation Correct operation FMT_MSA.1 Management of security attribute Table 6. Summary of functional security requirements for the TOE (continued) Label Title Addressing Origin Type Security requirements SA/SB23YT66/34A Security Target - Public Version 28/51 SMD_Sx23YTxx_ST_09_002 7.1.3 Limited capabilities (FMT_LIM.1) 109 The TSF shall be designed and implemented in a manner that limits their capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Limited capability and availability Policy. 7.1.4 Limited availability (FMT_LIM.2) 110 The TSF shall be designed and implemented in a manner that limits their availability so that in conjunction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Limited capability and availability Policy. 111 SFP_1: Limited capability and availability Policy Deploying Test Features after TOE Delivery does not allow User Data to be disclosed or manipulated, TSF data to be disclosed or manipulated, software to be reconstructed and no substantial information about construction of TSF to be gathered which may enable other attacks. 7.1.5 Audit storage (FAU_SAS.1) 112 The TSF shall provide the test process before TOE Delivery with the capability to store the Initialisation Data and/or Pre-personalisation Data and/or supplements of the Security IC Embedded Software in the NVM. 7.1.6 Resistance to physical attack (FPT_PHP.3) 113 The TSF shall resist physical manipulation and physical probing, to the TSF by responding automatically such that the SFRs are always enforced. 114 Refinement: The TSF will implement appropriate mechanisms to continuously counter physical manipulation and physical probing. Due to the nature of these attacks (especially manipulation) the TSF can by no means detect attacks on all of its elements. Therefore, permanent protection against these attacks is required ensuring that security functional requirements are enforced. Hence, “automatic response” means here (i)assuming that there might be an attack at any time and (ii)countermeasures are provided at any time. 7.1.7 Basic internal transfer protection (FDP_ITT.1) 115 The TSF shall enforce the Data Processing Policy to prevent the disclosure of user data when it is transmitted between physically-separated parts of the TOE. 7.1.8 Basic internal TSF data transfer protection (FPT_ITT.1) 116 The TSF shall protect TSF data from disclosure when it is transmitted between separate parts of the TOE. 117 Refinement: The different memories, the CPU and other functional units of the TOE (e.g. a cryptographic co-processor) are seen as separated parts of the TOE. This requirement is equivalent to FDP_ITT.1 above but refers to TSF data instead of User Data. Therefore, it should be understood as to refer to the same Data Processing Policy defined under FDP_IFC.1 below. SA/SB23YT66/34A Security Target - Public Version Security requirements SMD_Sx23YTxx_ST_09_002 29/51 7.1.9 Subset information flow control (FDP_IFC.1) 118 The TSF shall enforce the Data Processing Policy on all confidential data when they are processed or transferred by the TSF or by the Security IC Embedded Software. 119 SFP_2: Data Processing Policy User Data and TSF data shall not be accessible from the TOE except when the Security IC Embedded Software decides to communicate the User Data via an external interface. The protection shall be applied to confidential data only but without the distinction of attributes controlled by the Security IC Embedded Software. 7.1.10 Random number generation (FCS_RNG.1) 120 The TSF shall provide a physical random number generator that implements a total failure test of the random source. 121 The TSF shall provide random numbers that meet P2 class of BSI-AIS31. 7.1.11 Cryptographic operation (FCS_COP.1) 122 Depending on the product in Table 7, the TSF shall perform the operations in Table 7 in accordance with a specified cryptographic algorithm in Table 7 and cryptographic key sizes of Table 7 that meet the standards in Table 7. Table 7. FCS_COP.1 iterations (cryptographic operations) Product Iteration label [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] Sx23YTxx (TOE) DES / 3DES operation encryption decryption - in Cipher Block Chaining (CBC) mode - in Electronic Code Book (ECB) mode - in CBC-MAC operating modes Data Encryption Standard (DES) 56 effective bits FIPS PUB 46-3 ISO/IEC 9797-1 ISO/IEC 10116 Triple Data Encryption Standard (3DES) 112 effective bits Sx23YTxx (TOE) RSA operation RSA recovery (encryption) RSA signature (decryption) without the Chinese Remainder Theorem RSA signature (decryption) with the Chinese Remainder Theorem Rivest, Shamir & Adleman’s up to 4096 bits PKCS #1 V2.1 SB23YTxx AES operation cipher operation inverse cipher operation Advanced Encryption Standard 128, 192 and 256 bits FIPS PUB 197 Security requirements SA/SB23YT66/34A Security Target - Public Version 30/51 SMD_Sx23YTxx_ST_09_002 7.1.12 Cryptographic key generation (FCS_CKM.1) 123 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm, in Table 8, and specified cryptographic key sizes of Table 8 that meet the following standards in Table 8. 7.1.13 Static attribute initialisation (FMT_MSA.3) 124 The TSF shall enforce the Dynamic Memory Access Control Policy to provide minimally protective(a) default values for security attributes that are used to enforce the SFP. SB23YTxx Elliptic Curves Cryptography operation general point addition, point expansion point compression, public scalar multiplication private scalar multiplication Elliptic Curves Cryptography on GF(p) up to 640 bits IEEE 1363-2000, chapter 7 IEEE 1363a-2004 Sx23YTxx (TOE) SHA-1 operation SHA-1 (secure hash function) revised Secure Hash Algorithm (SHA-1) assignment pointless because algorithm has no key FIPS PUB 180-1 FIPS PUB 180-2 ISO/IEC 10118- 3:1998 Sx23YTxx (TOE) SHA-224 operation SHA-224 (secure hash function) revised Secure Hash Algorithm (SHA-224) assignment pointless because algorithm has no key FIPS PUB 180-1 FIPS PUB 180-2 ISO/IEC 10118- 3:1998 Sx23YTxx (TOE) SHA-256 operation SHA-256 (secure hash function) revised Secure Hash Algorithm (SHA-256) assignment pointless because algorithm has no key FIPS PUB 180-1 FIPS PUB 180-2 ISO/IEC 10118- 3:1998 Table 7. FCS_COP.1 iterations (cryptographic operations) (continued) Product Iteration label [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] Table 8. FCS_CKM.1 iterations (cryptographic key generation) Iteration label [assignment: cryptographic key generation algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] Prime generation primes generation algorithm up to 2048 bits FIPS PUB 140-2 FIPS PUB 186 RSA key generation RSA public and private keys computation algorithm up to 4096 bits FIPS PUB 140-2 ISO/IEC 9796-2 PKCS #1 V2.1 SA/SB23YT66/34A Security Target - Public Version Security requirements SMD_Sx23YTxx_ST_09_002 31/51 125 The TSF shall allow none to specify alternative initial values to override the default values when an object or information is created. Application note: The security attributes are the set of access rights currently defined. They are dynamically attached to the subjects and objects locations, i.e. each logical address. 7.1.14 Management of security attributes (FMT_MSA.1) 126 The TSF shall enforce the Dynamic Memory Access Control Policy to restrict the ability to modify the current set of access rights security attributes to software running in supervisor level. 7.1.15 Complete access control (FDP_ACC.2) 127 The TSF shall enforce the Dynamic Memory Access Control Policy on all subjects (software), all objects (data including code stored in memories) and all operations among subjects and objects covered by the SFP. 128 The TSF shall ensure that all operations between any subject controlled by the TSF and any object controlled by the TSF are covered by an access control SFP. 7.1.16 Security attribute based access control (FDP_ACF.1) 129 The TSF shall enforce the Dynamic Memory Access Control Policy to objects based on the software clearance level, the object location, the operation to be performed, and the current set of access rights. 130 The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: the operation is allowed if and only if the software clearance level, the object location and the operation matches an entry in the current set of access rights. 131 The TSF shall explicitly authorise access of subjects to objects based on the following additional rules: none. 132 The TSF shall explicitly deny access of subjects to objects based on the following additional rules: none. Note: It should be noted that this level of policy detail is not needed at the application level. The composite Security Target writer should describe the SICESW access control and information flow control policies instead. Within the SICESW High Level Design description, the chosen setting of IC security attributes would be shown to implement the described policies relying on the IC SFP presented here. 133 The following SFP Dynamic Memory Access Control Policy is defined for the requirement "Security attribute based access control (FDP_ACF.1)": 134 SFP_3: Dynamic Memory Access Control Policy 135 The TSF must control read, write, execute accesses of software to data (including code stored in memory areas), based on their respective clearance levels and on the current set of access rights. a. See the Datasheet referenced in Section 9 for actual values. Security requirements SA/SB23YT66/34A Security Target - Public Version 32/51 SMD_Sx23YTxx_ST_09_002 7.2 TOE security assurance requirements 136 Security Assurance Requirements for the TOE for the evaluation of the TOE are those taken from the Evaluation Assurance Level 5 (EAL5) and augmented by taking the following components: ● ALC_DVS.2 and AVA_VAN.5. 137 Regarding application note 21 of BSI-PP-0035, the continuously increasing maturity level of evaluations of Security ICs justifies the selection of a higher-level assurance package. 138 The set of security assurance requirements (SARs) is presented in Table 9, indicating the origin of the requirement. 7.3 Refinement of the security assurance requirements 139 As BSI-PP-0035 defines refinements for selected SARs, these refinements are also claimed in this Security Target. 140 The main customizing is that the IC Dedicated Software is an operational part of the TOE after delivery, although it is not available to the user. Table 9. TOE security assurance requirements Label Title Origin ADV_ARC.1 Security architecture description EAL5/BSI-PP-0035 ADV_FSP.5 Complete semi-formal functional specification with additional error information EAL5 ADV_IMP.1 Implementation representation of the TSF EAL5/BSI-PP-0035 ADV_INT.2 Well-stuctured internals EAL5 ADV_TDS.4 Semiformal modular design EAL5 AGD_OPE.1 Operational user guidance EAL5/BSI-PP-0035 AGD_PRE.1 Preparative procedures EAL5/BSI-PP-0035 ALC_CMC.4 Production support, acceptance procedures and automation EAL5/BSI-PP-0035 ALC_CMS.5 Development tools CM coverage EAL5 ALC_DEL.1 Delivery procedures EAL5/BSI-PP-0035 ALC_DVS.2 Sufficiency of security measures BSI-PP-0035 ALC_LCD.1 Developer defined life-cycle model EAL5/BSI-PP-0035 ALC_TAT.2 Compliance with implementation standards EAL5 ATE_COV.2 Analysis of coverage EAL5/BSI-PP-0035 ATE_DPT.3 Testing: modular design EAL5 ATE_FUN.1 Functional testing EAL5/BSI-PP-0035 ATE_IND.2 Independent testing - sample EAL5/BSI-PP-0035 AVA_VAN.5 Advanced methodical vulnerability analysis BSI-PP-0035 SA/SB23YT66/34A Security Target - Public Version Security requirements SMD_Sx23YTxx_ST_09_002 33/51 141 Regarding application note 22 of BSI-PP-0035, the refinements for all the assurance families have been reviewed for the hierarchically higher-level assurance components selected in this Security Target. 142 The text of the impacted refinements of BSI-PP-0035 is reproduced in the next sections. 143 For reader’s ease, an impact summary is provided in Table 10. 7.3.1 Refinement regarding functional specification (ADV_FSP) 144 Although the IC Dedicated Test Software is a part of the TOE, the test functions of the IC Dedicated Test Software are not described in the Functional Specification because the IC Dedicated Test Software is considered as a test tool delivered with the TOE but not providing security functions for the operational phase of the TOE. The IC Dedicated Software provides security functionalities as soon as the TOE becomes operational (boot software). These are properly identified in the delivered documentation. 145 The Functional Specification refers to datasheet to trace security features that do not provide any external interface but that contribute to fulfil the SFRs e.g. like physical protection. Thereby they are part of the complete instantiation of the SFRs. 146 The Functional Specification refers to design specifications to detail the mechanisms against physical attacks described in a more general way only, but detailed enough to be able to support Test Coverage Analysis also for those mechanisms where inspection of the layout is of relevance or tests beside the TSFI may be needed. 147 The Functional Specification refers to data sheet to specify operating conditions of the TOE. These conditions include but are not limited to the frequency of the clock, the power supply, and the temperature. 148 All functions and mechanisms which control access to the functions provided by the IC Dedicated Test Software (refer to the security functional requirement (FMT_LIM.2)) are part of the Functional Specification. Details will be given in the document for ADV_ARC, refer to Section 6.2.1.5. In addition, all these functions and mechanisms are subsequently be Table 10. Impact of EAL5 selection on BSI-PP-0035 refinements Assurance Family BSI-PP-0035 Level ST Level Impact on refinement ADO_DEL 1 1 None ALC_DVS 2 2 None ALC_CMS 4 5 None, refinement is still valid ALC_CMC 4 4 None ADV_ARC 1 1 None ADV_FSP 4 5 Presentation style changes, IC Dedicated Software is included ADV_IMP 1 1 None ATE_COV 2 2 IC Dedicated Software is included AGD_OPE 1 1 None AGD_PRE 1 1 None AVA_VAN 5 5 None Security requirements SA/SB23YT66/34A Security Target - Public Version 34/51 SMD_Sx23YTxx_ST_09_002 refined according to all relevant requirements of the Common Criteria assurance class ADV because these functions and mechanisms are active after TOE Delivery and need to be part of the assurance aspects Tests (class ATE) and Vulnerability Assessment (class AVA). Therefore, all necessary information is provided to allow tests and vulnerability assessment. 149 Since the selected higher-level assurance component requires a security functional specification presented in a “semi-formal style" (ADV_FSP.5.2C) the changes affect the style of description, the BSI-PP-0035 refinements can be applied with changes covering the IC Dedicated Test Software and are valid for ADV_FSP.5. 7.3.2 Refinement regarding test coverage (ATE_COV) 150 The TOE is tested under different operating conditions within the specified ranges. These conditions include but are not limited to the frequency of the clock, the power supply, and the temperature. This means that “Fault tolerance (FRU_FLT.2)” is proven for the complete TSF. The tests must also cover functions which may be affected by “ageing” (such as EEPROM writing). 151 The existence and effectiveness of measures against physical attacks (as specified by the functional requirement FPT_PHP.3) cannot be tested in a straightforward way. Instead STMicroelectronics provides evidence that the TOE actually has the particular physical characteristics (especially layout design principles). This is done by checking the layout (implementation or actual) in an appropriate way. The required evidence pertains to the existence of mechanisms against physical attacks (unless being obvious). 152 The IC Dedicated Test Software is seen as a “test tool” being delivered as part of the TOE. However, the Test Features do not provide security functionality. Therefore, Test Features need not to be covered by the Test Coverage Analysis but all functions and mechanisms which limit the capability of the functions (cf. FMT_LIM.1) and control access to the functions (cf. FMT_LIM.2) provided by the IC Dedicated Test Software must be part of the Test Coverage Analysis. The IC Dedicated Software provides security functionalities as soon as the TOE becomes operational (boot software). These are part of the Test Coverage Analysis. 7.4 Security Requirements rationale 7.4.1 Rationale for the Security Functional Requirements 153 Just as for the security objectives rationale of Section 6.3, the main line of this rationale is that the inclusion of all the security requirements of the BSI-PP-0035 protection profile, together with those in AUG, guarantees that all the security objectives identified in Section 6 are suitably addressed by the security requirements stated in this chapter, and that the latter together form an internally consistent whole. 154 As origins of security objectives have been carefully kept in their labelling, and origins of security requirements have been carefully identified in Table 6 and Table 9, it can be verified that the justifications provided by the BSI-PP-0035 protection profile and AUG can just be carried forward to their union. 155 From Table 4, it is straightforward to identify two additional security objectives for the TOE (AUG1.O.Add-Functions and AUG4.O.Mem Access), all tracing back to AUG. This rationale must show that security requirements suitably address these too. SA/SB23YT66/34A Security Target - Public Version Security requirements SMD_Sx23YTxx_ST_09_002 35/51 156 Furthermore, a more careful observation of the requirements listed in Table 6 and Table 9 shows that: ● there are additional security requirements introduced by this Security Target (FCS_CKM.1 and various assurance requirements of EAL5), ● there are security requirements introduced from AUG (FCS_COP.1, FDP_ACC.2, FDP_ACF.1, FMT_MSA.3 and FMT_MSA.1). 157 Though it remains to show that: ● security objectives from AUG are addressed by security requirements stated in this chapter, ● additional security requirements from this Security Target and from AUG are mutually supportive to the security requirements from the BSI-PP-0035 protection profile, and they do not introduce internal contradictions, ● all dependencies are still satisfied. 158 The justification that the additional security objectives are suitably addressed, that the additional security requirements are mutually supportive and that, together with those already in BSI-PP-0035, they form an internally consistent whole, is provided in the next subsections. 7.4.2 Additional security objectives are suitably addressed Security objective “Dynamic Area based Memory Access Control (AUG4.O.Mem Access)” 159 The justification related to the security objective “Dynamic Area based Memory Access Control (AUG4.O.Mem Access)” is as follows: 160 The security functional requirements "Complete access control (FDP_ACC.2)" and "Security attribute based access control (FDP_ACF.1)", with the related Security Function Policy (SFP) “Dynamic Memory Access Control Policy” exactly require to implement a Dynamic area based memory access control as demanded by AUG4.O.Mem Access. Therefore, FDP_ACC.2 and FDP_ACF.1 with their SFP are suitable to meet the security objective. 161 The security functional requirement "Static attribute initialisation (FMT_MSA.3)" requires that the TOE provides default values for security attributes. The ability to update the security attributes is restricted to privileged subject(s) as further detailed in the security functional requirement "Management of security attributes (FMT_MSA.1)". These management functions ensure that the required access control can be realised using the functions provided by the TOE. Security objective “Additional Specific Security Functionality (AUG1.O.Add- Functions)” 162 The justification related to the security objective “Additional Specific Security Functionality (AUG1.O.Add-Functions)” is as follows: 163 The security functional requirements “Cryptographic operation (FCS_COP.1)” and "Cryptographic key generation (FCS_CKM.1)" exactly require those functions to be implemented that are demanded by AUG1.O.Add-Functions. Therefore, FCS_COP.1 is suitable to meet the security objective, together with FCS_CKM.1. Security requirements SA/SB23YT66/34A Security Target - Public Version 36/51 SMD_Sx23YTxx_ST_09_002 7.4.3 Additional security requirements are consistent "Cryptographic operation (FCS_COP.1) & key generation (FCS_CKM.1)" 164 These security requirements have already been argued in Section : Security objective “Additional Specific Security Functionality (AUG1.O.Add-Functions)” above. "Static attribute initialisation (FMT_MSA.3), Management of security attributes (FMT_MSA.1), Complete access control (FDP_ACC.2), Security attribute based access control (FDP_ACF.1)" 165 These security requirements have already been argued in Section : Security objective “Dynamic Area based Memory Access Control (AUG4.O.Mem Access)” above. 7.4.4 Dependencies of Security Functional Requirements 166 All dependencies of Security Functional Requirements have been fulfilled in this Security Target except : ● those justified in the BSI-PP-0035 protection profile security requirements rationale, ● those justifed in AUG security requirements rationale (except on FMT_MSA.2, see discussion below), ● the dependency of FMT_MSA.1 on FMT_SMF.1 (see discussion below). 167 Details are provided in Table 11 below. Table 11. Dependencies of security functional requirements Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-PP-0035 or in AUG FRU_FLT.2 FPT_FLS.1 Yes Yes, BSI-PP-0035 FPT_FLS.1 None No dependency Yes, BSI-PP-0035 FMT_LIM.1 FMT_LIM.2 Yes Yes, BSI-PP-0035 FMT_LIM.2 FMT_LIM.1 Yes Yes, BSI-PP-0035 FAU_SAS.1 None No dependency Yes, BSI-PP-0035 FPT_PHP.3 None No dependency Yes, BSI-PP-0035 FDP_ITT.1 FDP_ACC.1 or FDP_IFC.1 Yes Yes, BSI-PP-0035 FPT_ITT.1 None No dependency Yes, BSI-PP-0035 FDP_IFC.1 FDP_IFF.1 No, see BSI-PP-0035 Yes, BSI-PP-0035 FCS_RNG.1 None No dependency Yes, BSI-PP-0035 FCS_COP.1 [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1] Yes Yes, AUG #1 (adapted to CC V3.1 R2, see discussion below) FCS_CKM.4 Yes (by the environment) SA/SB23YT66/34A Security Target - Public Version Security requirements SMD_Sx23YTxx_ST_09_002 37/51 168 Part 2 of the Common Criteria defines the dependency of "Management of security attributes (FMT_MSA.1)" on "Specification of management functions (FMT_SMF.1)". In this particular ST, the specification of FMT_SMF.1 is useless. As stated in the Dynamic Memory Access Control Policy and in FMT_MSA.1, there is no specific function for the management of the memory access rights, it is just part of the Management of the security attributes. 169 AUG #1 defines the dependency of “Cryptographic operation (FCS_COP.1)" on "Secure security attributes (FMT_MSA.2)". This dependency is not anymore defined in the Part 2 of the Common Criteria V3.1 Revision 2. Thus, it has not been retained in this Security Target. 7.4.5 Rationale for the Assurance Requirements Security assurance requirements added to reach EAL5 (Table 9) 170 Regarding application note 21 of BSI-PP-0035, this Security Target chooses EAL5 because developers and users require a high level of independently assured security in a planned development and require a rigorous development approach without incurring unreasonable costs attributable to specialist security engineering techniques. 171 EAL5 represents a meaningful increase in assurance from EAL4 by requiring semiformal design descriptions, a more structured (and hence analyzable) architecture, and improved mechanisms and/or procedures that provide confidence that the TOE will not be tampered during development. 172 The assurance components in an evaluation assurance level (EAL) are chosen in a way that they build a mutually supportive and complete set of components. The requirements chosen for augmentation do not add any dependencies, which are not already fulfilled for the corresponding requirements contained in EAL5. Therefore, these components add additional assurance to EAL5, but the mutual support of the requirements and the internal consistency is still guaranteed. FCS_CKM.1 [FDP_CKM.2 or FCS_COP.1] Yes No, CCMB-2007-09-002 FCS_CKM.4 Yes (by the environment) FDP_ACC.2 FDP_ACF.1 Yes No, CCMB-2007-09-002 FDP_ACF.1 FDP_ACC.1 Yes Yes, AUG #4 FMT_MSA.3 Yes FMT_MSA.3 FMT_MSA.1 Yes Yes, AUG #4 FMT_SMR.1 No, see AUG #4 FMT_MSA.1 [FDP_ACC.1 or FDP_IFC.1] Yes Yes, AUG #4 FMT_SMF.1 No, see discussion below No, CCMB-2007-09-002 FMT_SMR.1 No, see AUG #4 Yes, AUG #4 Table 11. Dependencies of security functional requirements (continued) Label Dependencies Fulfilled by security requirements in this Security Target Dependency already in BSI-PP-0035 or in AUG Security requirements SA/SB23YT66/34A Security Target - Public Version 38/51 SMD_Sx23YTxx_ST_09_002 173 Note that detailed and updated refinements for assurance requirements are given in Section 7.3. Dependencies of assurance requirements 174 Dependencies of security assurance requirements are fulfilled by the EAL5 package selection. 175 Augmentation to this package are identified in paragraph 136 and do not introduce dependencies not already satisfied by the EAL5 package. SA/SB23YT66/34A Security Target - Public Version TOE summary specification SMD_Sx23YTxx_ST_09_002 39/51 8 TOE summary specification 176 This section demonstrates how the TOE meets each Security Functional Requirement. 177 The following TSS relies on the refinement of the TSF security elements, as detailed in the TOE Functional Specification referenced in the ST/SB23YT66/34 Documentation Report (see Section 9, paragraph 218). 8.1 Statement of TOE security functionality 178 The following TSF services are an abstraction of the TOE Functional Specification. 8.1.1 TSF_INIT_A: Hardware initialisation & TOE attribute initialisation 179 In TEST and USER configurations, this functionality ensures the following: ● the TOE starts running in a secure state, ● the TOE is securely initialised, ● the reset operation is correctly managed. 8.1.2 TSF_CONFIG_A: TOE configuration switching and control 180 In TEST and USER configurations, this functionality ensures the switching and the control of TOE configuration. 181 This functionality ensures that the TOE is either in TEST or USER configuration. 182 The only authorised TOE configuration modification is TEST to USER configuration, by the TEST administrator. 183 This functionality is responsible for the TOE configuration detection and notification to the other resources of the TOE. 8.1.3 TSF_INT_A: TOE logical integrity 184 In TEST and USER configurations, this functionality is responsible for: ● correcting single bit fails upon a read operation on each NVM byte, ● verifying valid CPU usage, ● checking integrity loss when accessing NVM, ROM or RAM, ● providing a sign engine to check code and/or data integrity loss, ● monitoring various manifestations of fault injection attempts, ● providing a security timeout feature (watchdog timer), ● providing the SICESW with the traceability information of the TOE. 185 This functionality is responsible for reporting to TSF_ADMINIS_A all detected errors resulting from the above operations. 8.1.4 TSF_TEST_A: Test of the TOE 186 This functionality is responsible for restricting access of the TOE TEST functionality to the TEST process in TEST configuration. TOE summary specification SA/SB23YT66/34A Security Target - Public Version 40/51 SMD_Sx23YTxx_ST_09_002 187 In TEST configuration, this functionality ensures that the only allowed TOE user is an authorized TEST process. 188 In TEST configuration, this functionality ensures the test of TOE functionality with respect to the IC specification, including the TSF. This functionality is therefore responsible of the hardware functional integrity (CPU, RAM, ROM, NVM, Bus...). 189 In TEST configuration, this functionality provides commands to store data and/or pre- personalisation data and/or supplements of the Security IC Embedded Software (personalisation). 190 In USER configuration, this functionality ensures that the critical TOE TEST functionality is disabled. 8.1.5 TSF_FWL_A: Memory Firewall 191 In TEST and USER configurations, this security functionality monitors: ● access from memory locations to other locations for ROM, RAM and NVM, ● register access. 192 The TOE memories segmentation and protection can be dynamically defined, by the TOE user, thanks to the Memory Protection Unit (MPU), in order to implement various access control policies. 193 A default-TOE memories segmentation and protection is initially defined by ST. 194 In TEST and USER configurations, this security functionality relies on the MPU to ensure that only the Supervisor programs can change the TOE memories segmentation and protection in ROM, RAM and NVM. 195 This security functionality is responsible for the notification of violation attempts to TSF_ADMINIS_A. 8.1.6 TSF_PHT_A: Physical tampering protection 196 In TEST and USER configurations, this functionality ensures the following: ● the TOE detects clock and voltage supply operating changes by the environment, ● the TOE detects attempts to violate its physical integrity, and glitch attacks, ● the TOE is always clocked with shape and timing within specified operating conditions. 197 This functionality is responsible for the notification of physical tampering attempts and clock and voltage supply operating changes by the environment to TSF_ADMINIS_A. 8.1.7 TSF_ADMINIS_A: Security violation administrator 198 In TEST and USER configurations, this functionality ensures the management of security violations attempts. SA/SB23YT66/34A Security Target - Public Version TOE summary specification SMD_Sx23YTxx_ST_09_002 41/51 199 The main security violations attempts which are managed are: ● incorrect CPU usage, ● integrity loss in NVM, ROM or RAM, ● code signature alarm, ● fault injection attempt, ● watchdog timeout. ● access attempt to unavailable or reserved memory areas, ● MPU errors, ● clock and voltage supply operating changes by the environment, ● TOE physical integrity abuse. 8.1.8 TSF_OBS_A: Unobservability 200 In USER configuration, this functionality addresses the Basic internal transfer protection (FDP_ITT.1), the Basic internal TSF data transfer protection (FPT_ITT.1) and the Subset information flow control (FDP_IFC.1) security functional requirements expressed in this document. 201 This functionality provides additional support mechanisms to the SICESW developer contributing to avoid information leakage. 8.1.9 TSF_SKCS_A: Symmetric Key Cryptography Support 202 In USER configuration, this functionality implements the following standard symmetric key cryptography algorithms: ● Data Encryption Standard (DES) with 64 bits long keys (56 effective bits). This functionality supports the following standard modes of operation, both for encryption and for decryption: ● DES by itself (fast DES), ● Triple DES. Each of these modes of operation can be chained in the standard Cipher Block Chaining mode (CBC). 203 For the SB23YTxx only, in User configuration, this security functionality implements the following standard symmetric key cryptography algorithms: ● Advanced Encryption Standard (AES) with 128, 192 and 256 bits long keys, 128 bits long blocks, providing cipher, inverse cipher and key expansion operations. 8.1.10 TSF_AKCS_A: Asymmetric Key Cryptography Support 204 In USER configuration, this functionality implements the following standard asymmetric key cryptography algorithms: ● RSA verification (encryption) with an RSA modulo up to 4096 bits, ● RSA signature (decryption) using or not using the Chinese Remainder Theorem (CRT), with an RSA modulo up to 4096 bits, ● RSA private and public keys computation with an RSA modulo up to 4096 bits, ● Prime number generation up to 3200 bits, with Rabin-Miller primality tests. TOE summary specification SA/SB23YT66/34A Security Target - Public Version 42/51 SMD_Sx23YTxx_ST_09_002 205 In USER configuration, this functionality implements the following standard hash function: ● SHA-1 hash function chaining blocks of 512 bits to get a 160-bit result, ● SHA-224 hash function chaining blocks of 512 bits to get a 224-bit result, ● SHA-256 hash function chaining blocks of 512 bits to get a 256-bit result. 206 For the SB23YTxx only, in USER configuration, this security function provides to the SICESW developer the following very efficient basic functions for Elliptic Curves Cryptography over prime fields: ● general point addition, ● point expansion and compression, ● public scalar multiplication, ● private scalar multiplication. 8.1.11 TSF_ALEAS_A: Unpredictable Number Generation Support 207 In all configurations, this functionality provides 8-bit true random numbers. 208 In USER configuration, this functionality supports the mitigation of information leakage. 209 This functionality can be qualified with the test metrics required by the BSI-AIS31 standard for a P2 class device. 8.2 TOE summary specification rationale 210 This section shows that the TSF and assurance measures are suitable to meet the TOE security requirements. 8.2.1 TSF rationale 211 This section demonstrates that the combination of the specified TSF work together so as to satisfy the TOE security functional requirements. 212 Each of the security functional requirements is addressed by at least one or a combination of TSF services. 213 The complete rationale has been presented and evaluated in the SB23YT66, SA23YT66, ST23YT66, SB23YT34, SA23YT34, ST23YT34 Security Target. 214 For confidentiality reasons, this rationale is not fully reproduced here. 215 Table 12 below summarises which TOE security functional requirements (SFRs) are addressed by each TSF service (TSFs). SA/SB23YT66/34A Security Target - Public Version TOE summary specification SMD_Sx23YTxx_ST_09_002 43/51 Table 12. Mapping of TSF services and SFRs TSFs SFRs TSF_INIT_A (8.1.1) TSF_CONFIG_A (8.1.2) TSF_INT_A (8.1.3) TSF_TEST_A (8.1.4) TSF_FWL_A (8.1.5) TSF_PHT_A (8.1.6) TSF_ADMINIS_A (8.1.7) TSF_OBS_A (8.1.8) TSF_ALEAS_A (8.1.11) TSF_SKCS_A (8.1.9) TSF_AKCS_A (8.1.10) FAU_SAS.1 (7.1.5) X X FRU_FLT.2 (7.1.1) X X FPT_FLS.1 (7.1.2) X X X X X FMT_LIM.1 (7.1.3) X X FMT_LIM.2 (7.1.4) X X FPT_PHP.3 (7.1.6) X X X FDP_ITT.1 (7.1.7) X X X X X FPT_ITT.1 (7.1.8) X X X X X FDP_IFC.1 (7.1.9) X X X X X FCS_RNG.1 (7.1.10) X FDP_ACC.2 (7.1.15) X FDP_ACF.1 (7.1.16) X FMT_MSA.3 (7.1.13) X FMT_MSA.1 (7.1.14) X FCS_COP.1 (7.1.11) X X FCS_CKM.1 (7.1.12) X References SA/SB23YT66/34A Security Target - Public Version 44/51 SMD_Sx23YTxx_ST_09_002 9 References 216 Protection Profile references 217 Sx23Zxx Security Target reference 218 Target of Evaluation referenced documents 219 For security reasons, all these documents are classified and their applicable revisions are referenced in the ST/SB23YT66/34 Documentation Report. 220 Standards references Component description Reference Revision Security IC Platform Protection Profile BSI-PP-0035 1.0 Component description Reference SB23YT66, SA23YT66, ST23YT66, SB23YT34, SA23YT34, ST23YT34 Security Target SMD_Sx23YTxx_ST_09_001 Component description Reference ST/SB23YT66/34 Documentation Report SMD_STSB23YT66_DR_09_001 Ref Identifier Description [1] BSI-AIS31 A proposal for Functionality classes and evaluation methodology for true (physical) random number generators, W. Killmann & W. Schindler BSI, Version 3.1, 25-09-2001 [2] FIPS PUB 46-3 FIPS PUB 46-3, Data encryption standard (DES), National Institute of Standards and Technology, U.S. Department of Commerce, 1999 [3] FIPS PUB 140-2 FIPS PUB 140-2, Security Requirements for Cryptographic Modules, National Institute of Standards and Technology, U.S. Department of Commerce, 1999 [4] FIPS PUB 180-1 FIPS PUB 180-1 Secure Hash Standard, National Institute of Standards and Technology, U.S. Department of Commerce,1995 [5] FIPS PUB 180-2 FIPS PUB 180-2 Secure Hash Standard with Change Notice 1 dated February 25,2004, National Institute of Standards and Technology, U.S.A., 2004 [6] FIPS PUB 186 FIPS PUB 186 Digital Signature Standard (DSS), National Institute of Standards and Technology, U.S.A., 1994 [7] FIPS PUB 197 FIPS PUB 197, Advanced Encryption Standard (AES), National Institute of Standards and Technology, U.S. Department of Commerce, November 2001 SA/SB23YT66/34A Security Target - Public Version References SMD_Sx23YTxx_ST_09_002 45/51 [8] ISO/IEC 9796-2 ISO/IEC 9796, Information technology - Security techniques - Digital signature scheme giving message recovery - Part 2: Integer factorization based mechanisms, ISO, 2002 [9] ISO/IEC 9797-1 ISO/IEC 9797, Information technology - Security techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms using a block cipher, ISO, 1999 [10] ISO/IEC 10116 ISO/IEC 10116, Information technology - Security techniques - Modes of operation of an n-bit block cipher algorithm, ISO, 1997 [11] ISO/IEC 10118- 3:1998 ISO/IEC 10118-3:1998, Information technology - Security techniques - Hash functions - Part 3: Dedicated hash functions [12] ISO/IEC 14888 ISO/IEC 14888, Information technology - Security techniques - Digital signatures with appendix - Part 1: General (1998), Part 2: Identity- based mechanisms (1999), Part 3: Certificate based mechanisms (2006), ISO [13] CCMB-2006-09-001 Common Criteria for Information Technology Security Evaluation - Part 1: Introduction and general model, September 2006, version 3.1 [14] CCMB-2007-09-002 Common Criteria for Information Technology Security Evaluation - Part 2: Security functional components, September 2007, version 3.1 Revision 2 [15] CCMB-2007-09-003 Common Criteria for Information Technology Security Evaluation - Part 3: Security assurance components, September 2007, version 3.1 Revision 2 [16] AUG Smartcard Integrated Circuit Platform Augmentations, Atmel, Hitachi Europe, Infineon Technologies, Philips Semiconductors, Version 1.0, March 2002. [17] MIT/LCS/TR-212 On digital signatures and public key cryptosystems, Rivest, Shamir & Adleman Technical report MIT/LCS/TR-212, MIT Laboratory for computer sciences, January 1979 [18] IEEE 1363-2000 IEEE 1363-2000, Standard Specifications for Public Key Cryptography, IEEE, 2000 [19] IEEE 1363a-2004 IEEE 1363a-2004, Standard Specifications for Public Key Cryptography - Amendment 1:Additional techniques, IEEE, 2004 [20] PKCS #1 V2.1 PKCS #1 V2.1 RSA Cryptography Standard, RSA Laboratories, June 2002 [21] MOV 97 Alfred J. Menezes, Paul C. van Oorschot and Scott A. Vanstone, Handbook of Applied Cryptography, CRC Press, 1997 Ref Identifier Description Glossary SA/SB23YT66/34A Security Target - Public Version 46/51 SMD_Sx23YTxx_ST_09_002 Appendix A Glossary A.1 Terms Authorised user A user who may, in accordance with the TSP, perform an operation. Composite product Security IC product which includes the Security Integrated Circuit (i.e. the TOE) and the Embedded Software and is evaluated as composite target of evaluation. End-consumer User of the Composite Product in Phase 7. Integrated Circuit (IC) Electronic component(s) designed to perform processing and/or memory functions. IC Dedicated Software IC proprietary software embedded in a Security IC (also known as IC firmware) and developed by ST. Such software is required for testing purpose (IC Dedicated Test Software) but may provide additional services to facilitate usage of the hardware and/or to provide additional services (IC Dedicated Support Software). IC Dedicated Test Software That part of the IC Dedicated Software which is used to test the TOE before TOE Delivery but which does not provide any functionality thereafter. IC developer Institution (or its agent) responsible for the IC development. IC manufacturer Institution (or its agent) responsible for the IC manufacturing, testing, and pre- personalization. IC packaging manufacturer Institution (or its agent) responsible for the IC packaging and testing. Initialisation data Initialisation Data defined by the TOE Manufacturer to identify the TOE and to keep track of the Security IC’s production and further life-cycle phases are considered as belonging to the TSF data. These data are for instance used for traceability and for TOE identification (identification data) Object An entity within the TSC that contains or receives information and upon which subjects perform operations. Packaged IC Security IC embedded in a physical package such as micromodules, DIPs, SOICs or TQFPs. Pre-personalization data Any data supplied by the Card Manufacturer that is injected into the non-volatile memory by the Integrated Circuits manufacturer (Phase 3). These data are for instance used for traceability and/or to secure shipment between phases. Secret SA/SB23YT66/34A Security Target - Public Version Glossary SMD_Sx23YTxx_ST_09_002 47/51 Information that must be known only to authorised users and/or the TSF in order to enforce a specific SFP. Security IC Composition of the TOE, the Security IC Embedded Software, User Data, and the package. Security IC Embedded SoftWare (SICESW) Software embedded in the Security IC and not developed by the IC designer. The Security IC Embedded Software is designed in Phase 1 and embedded into the Security IC in Phase 3. Security IC embedded software (SICESW) developer Institution (or its agent) responsible for the security IC embedded software development and the specification of IC pre-personalization requirements, if any. Security attribute Information associated with subjects, users and/or objects that is used for the enforcement of the TSP. Sensitive information Any information identified as a security relevant element of the TOE such as: – the application data of the TOE (such as IC pre-personalization requirements, IC and system specific data), – the security IC embedded software, – the IC dedicated software, – the IC specification, design, development tools and technology. Smartcard A card according to ISO 7816 requirements which has a non volatile memory and a processing unit embedded within it. Subject An entity within the TSC that causes operations to be performed. Test features All features and functions (implemented by the IC Dedicated Software and/or hardware) which are designed to be used before TOE Delivery only and delivered as part of the TOE. TOE Delivery The period when the TOE is delivered which is after Phase 3 (or before Phase 4) in this Security target. TSF data Data created by and for the TOE, that might affect the operation of the TOE. User Any entity (human user or external IT entity) outside the TOE that interacts with the TOE. User data All data managed by the Smartcard Embedded Software in the application context. User data comprise all data in the final Smartcard IC except the TSF data. Glossary SA/SB23YT66/34A Security Target - Public Version 48/51 SMD_Sx23YTxx_ST_09_002 A.2 Abbreviations Table 13. List of abbreviations Term Meaning AIS Application notes and Interpretation of the Scheme (BSI) ALU Arithmetical and Logical Unit. BSI Bundesamt für Sicherheit in der Informationstechnik. CBC Cipher Block Chaining. CBC-MAC Cipher Block Chaining Message Authentication Code. CC Common Criteria Version 3.1. CPU Central Processing Unit. CRC Cyclic Redundancy Check. DCSSI Direction Centrale de la Sécurité des Systèmes d’Information DES Data Encryption Standard. DIP Dual-In-Line Package. EAL Evaluation Assurance Level. ECB Electronic Code Book. EDES Enhanced DES. EEPROM Electrically Erasable Programmable Read Only Memory. FIPS Federal Information Processing Standard. I/O Input / Output. IC Integrated Circuit. ISO International Standards Organisation. IT Information Technology. MPU Memory Protection Unit. NESCRYPT Next Step Cryptography Accelerator. NIST National Institute of Standards and Technology. NVM Non Volatile Memory. OSP Organisational Security Policy. OST Operating System for Test. PP Protection Profile. PUB Publication Series. RAM Random Access Memory. RF Radio Frequency. RF UART Radio Frequency Universal Asynchronous Receiver Transmitter. ROM Read Only Memory. RSA Rivest, Shamir & Adleman. SA/SB23YT66/34A Security Target - Public Version Glossary SMD_Sx23YTxx_ST_09_002 49/51 SAR Security Assurance Requirement. SFP Security Function Policy. SFR Security Functional Requirement. SICESW Security IC Embedded SoftWare. SOIC Small Outline IC. ST Context dependent : STMicroelectronics or Security Target. TOE Target of Evaluation. TQFP Thin Quad Flat Package. TRNG True Random Number Generator. TSC TSF Scope of Control. TSF TOE Security Functionality. TSFI TSF Interface. TSP TOE Security Policy. TSS TOE Summary Specification. Table 13. List of abbreviations (continued) Term Meaning Revision history SA/SB23YT66/34A Security Target - Public Version 50/51 SMD_Sx23YTxx_ST_09_002 10 Revision history Table 14. Document revision history Date Revision Changes 15-Dec-2009 01.00 Initial release. SA/SB23YT66/34A Security Target - Public Version SMD_Sx23YTxx_ST_09_002 51/51 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com