ID-One eIDL v1.0 in PACE configuration with AA, CA and
PACE CAM on NXP P60x144 PVA/PVE
Public Security Target
FQR No: 110 7977
FQR Issue: 2
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves - 92700
Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Legal Notice
© OT. All rights reserved.
Specifications and information are subject to change without notice.
The products described in this document are subject to continuous development and improvement.
All trademarks and service marks referred to herein, whether registered or not in specific countries, are the properties
of their respective owners.
** Printed versions of this document are uncontrolled **
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Document Management
A. Identification
Business Unit - Department CAI R&D
Document type: FQR
Document Title: ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE CAM on
NXP P60x144 PVA/PVE – Public Security Target
FQR No: 110 7977
FQR Issue: 2
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Table of contents
LIST OF FIGURES 8
LIST OF TABLES 8
1 SECURITY TARGET INTRODUCTION 9
1.1 Purpose ................................................................................................................9
1.2 Objective of the security target..............................................................................9
1.3 Security target identification ...............................................................................10
1.4 TOE technical identification .................................................................................11
1.5 IC identification...................................................................................................12
2 TOE OVERVIEW 13
2.1 Product overview................................................................................................13
2.2 TOE overview......................................................................................................14
2.3 TOE usages..........................................................................................................15
2.4 TOE definition .....................................................................................................17
3 TOE ARCHITECTURE 18
3.1 Integrated Circuit - NXP P60.................................................................................18
3.2 Low layer ............................................................................................................19
3.3 Tools modules.....................................................................................................20
3.4 Applicative modules............................................................................................20
3.5 Operating System................................................................................................21
3.6 Application layer .................................................................................................21
4 TOE LIFE CYCLE 23
4.1 Life cycle overview ..............................................................................................23
4.2 Phase 1 “Development”.......................................................................................25
4.3 Phase 2 “Manufacturing”.....................................................................................25
4.4 Phase 3 “Personalization of the travel document”................................................26
4.5 Phase 4 “Operational Use” ..................................................................................27
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
5 CONFORMANCE CLAIMS 28
5.1 Common Criteria conformance ............................................................................28
5.1.1 Overview of the SFR defined in this ST .................................................................... 28
5.1.2 Overview of the additional protocols ...................................................................... 29
5.1.2.1 Chip Authentication ........................................................................................................ 29
5.1.2.2 Active Authentication...................................................................................................... 29
5.1.2.3 Prepersonalization phase................................................................................................ 30
5.1.2.4 PACE CAM........................................................................................................................ 30
5.2 Protection Profile conformance ...........................................................................30
5.3 Rationale for the additions ..................................................................................31
5.4 Non evaluated features .......................................................................................31
6 SECURITY PROBLEM DEFINITION 33
6.1 Subjects ..............................................................................................................33
6.1.1 PP PACE subjects...................................................................................................... 33
6.1.2 Additional Subjects .................................................................................................. 35
6.2 Assets .................................................................................................................35
6.2.1 Primary assets .......................................................................................................... 35
6.2.2 Secondary assets...................................................................................................... 36
6.3 Threats ...............................................................................................................39
6.3.1 Threats from the PP PACE........................................................................................ 39
6.3.2 Threats for CA .......................................................................................................... 42
6.3.3 Threats for AA .......................................................................................................... 42
6.3.4 Threats for Note 6.................................................................................................... 42
6.4 Organisational Security Policies ...........................................................................43
6.4.1 OSP from PP PACE.................................................................................................... 43
6.4.2 OSP for CA................................................................................................................ 45
6.4.3 OSP for AA................................................................................................................ 45
6.5 Assumptions .......................................................................................................45
6.5.1 Assumptions from PP PACE...................................................................................... 45
6.5.2 Assumptions for Chip Authentication...................................................................... 46
6.5.3 Assumptions for Active Authentication ................................................................... 46
7 SECURITY OBJECTIVES 48
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
7.1 Security Objectives for the TOE............................................................................48
7.1.1 SO from PP PACE...................................................................................................... 48
7.1.2 SO for CA .................................................................................................................. 50
7.1.3 SO for AA.................................................................................................................. 51
7.1.4 SO for Note 6............................................................................................................ 51
7.2 Security objectives for the Operational Environment............................................52
7.2.1 OE from PP PACE...................................................................................................... 52
7.2.1.1 Document issuer and general responsible...................................................................... 52
7.2.1.2 Document issuer and CSCA document’s PKI (issuing) branch......................................... 52
7.2.2 OE for CA.................................................................................................................. 54
7.2.3 OE for AA.................................................................................................................. 55
8 EXTENDED REQUIREMENTS 56
8.1 Extended family FAU_SAS - Audit data storage.....................................................56
8.1.1 Extended components FAU_SAS.1........................................................................... 56
8.2 Extended family FCS_RND - Generation of random numbers ................................56
8.2.1 Extended component FCS_RND.1............................................................................ 56
8.3 Extended family FIA_API – Authentication proof of identity .................................56
8.3.1 Extended component FIA_API.1 .............................................................................. 56
8.4 Extended family FMT_LIM - Limited capabilities and availability...........................57
8.4.1 Extended component FMT_LIM.1............................................................................ 57
8.4.2 Extended component FMT_LIM.2............................................................................ 57
8.5 Extended family FPT_EMS - TOE Emanation .........................................................58
8.5.1 Extended component FPT_EMS.1............................................................................ 58
9 SECURITY REQUIREMENTS 59
9.1 Security Functional Requirements........................................................................59
9.1.1 Global SFR ................................................................................................................ 59
9.1.2 Product configuration SFR ....................................................................................... 61
9.1.2.1 SFR for additional code ................................................................................................... 61
9.1.2.2 Manufacturing and Personalization ................................................................................ 65
9.1.3 Active Authentication SFR........................................................................................ 72
9.1.4 Chip Authentication SFR........................................................................................... 75
9.1.5 PACE SFR .................................................................................................................. 82
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
9.1.6 PACE CAM SFR.......................................................................................................... 88
9.2 Security Assurance Requirements........................................................................90
10 TOE SUMMARY SPECIFICATION 91
10.1 TOE Summary Specification .................................................................................91
11 RATIONALES 95
12 REFERENCES 96
13 ACRONYMS 99
INDEX 100
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
List of Figures
Figure 1 - ID-One Native eDoc Overview 13
Figure 2 - Block 1 Overview 14
Figure 3 - TOE architecture 18
Figure 4: Smartcard product life-cycle for the TOE 23
List of tables
Table 1 - General Identification 10
Table 2 - TOE Technical Identification 11
Table 4 - Block 1 Applications overview 14
Table 5 - OT Cryptographic library 19
Table 6 - Roles identification on the life cycle 24
Table 7 - Subjects identification following life cycle steps 24
Table 8 - Conformance Rationale 28
Table 9 -SFR from the PP 29
Table 10 - Additional SFR 29
Table 11- Threats and Security Objectives – coverage 95
Table 12 - OSPs and Security Objectives – Coverage 95
Table 13 - Assumptions and OE – Coverage 95
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
1 SECURITY TARGET INTRODUCTION
1.1 Purpose
The objective of this document is to present the Public Security Target ID-One eIDL v1.0 in PACE
configuration with AA, CA and PACE CAM on NXP P60x144 PVA/PVE.
1.2 Objective of the security target
This security target describes the security needs for ID-One eIDL v1.0 product. The product is based
on PP PACE and adds requirements for prepersonalization and personalization.
This security target aims to satisfy the requirements of Common Criteria level EAL5 augmented as
defined in §1.3 in defining the security enforcing functions of the Target Of Evaluation and describing
the environment in which it operates.
The objectives of this Security Target are:
- To describe the Target of Evaluation (TOE), its life cycle and to position it in the smart
card life cycle.
- To describe the security environment of the TOE including the assets to be protected and
the threats to be countered by the TOE and by the operational environment during the
platform active phases.
- To describe the security objectives of the TOE and its supporting environment in terms of
integrity and confidentiality of sensitive information. It includes protection of the TOE
(and its documentation) during the product active phases.
- To specify the security requirements which include the TOE functional requirements, the
TOE assurance requirements and the security requirements for the environment.
- To describe the summary of the TOE specification including a description of the security
functions and assurance measures that meet the TOE security requirements.
- To present evidence that this ST is a complete and cohesive set of requirements that the
TOE provides on an effective set of IT security countermeasures within the security
environment, and that the TOE summary specification addresses the requirements.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
1.3 Security target identification
Title:
MINOS – ID-One eIDL v1.0 in PACE configuration with AA, CA and
PACE CAM on NXP P60x144 PVA/PVE – Security Target
Editor: Oberthur Technologies
CC version: 3.1 revision 4
EAL:
EAL5 augmented with:
- ALC_DVS.2
- AVA_VAN.5
PP(s): BSI-CC-PP-0068 v2 [R14]
ST Reference: FQR 110 7896 Issue 2
ITSEF: LETI
Certification Body: ANSSI
Evaluation scheme: FR
Table 1 - General Identification
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
1.4 TOE technical identification
Product name: ID-One ePass Full EAC v2
Commercial name of
the TOE:
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE
IC type
‘6A15’ (P60D144 VA)
‘6A20’ (P60C144 VA)
‘6E15’ (P60D144 VE)
‘6E20’ (P60C144 VE)
Additional code 1
Mandatory generic
Identification:
‘082456FF412E4D1EC087005B56A9A2CAC0B6558F4CAAE041D8B5A6934
5559B562A6F4C8E’
Additional code 2
Optional DBI
Identification:
‘082844FFE339C30BC6A81162413612FE2698284FA6CD28AA5CF5257A2
0B83611E58E9BEE’
Guidance documents
MINOS - ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM - Guidance Document - PREparative procedures
FQR 110 7933 Issue 2
MINOS - MRTD full EAC v2 - Guidance Document - OPErational user
guidance
FQR 110 7565 Issue 3
Table 2 - TOE Technical Identification
Nota Bene
- The additional code is encrypted with the LSK key
- An optional additional code (functional) can be loaded. This additional code, relative to the
Digitally Blurred Image process (DBI) is part of the product, but not in the scope of the
evaluation.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
1.5 IC identification
IC Reference: NXP P60 chips
TOE:
NXP P60x144/080 PVA/PVE (Y) [R18]
EAL 6 + ALC_FLR.1
Communication
protocol:
Contact, Contactless and Dual
Memory: ROM
Chip Manufacturer: NXP Semiconductors
Table 3 - Chip Identification
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
2 TOE OVERVIEW
2.1 Product overview
The product ID-One Native eDoc is a multi-applicative native software, embeddable in contact
and/or contact-less smart card integrated circuits of different form factors. The product can be
configured to serve different use cases, during the Prepersonalization/personalization phases of the
product. For more information on the product, please refer to complete ST.
The product supports the storage and retrieval of structured information compliant to the Logical
Data Structure as specified in [R2]. It also provides standard authentication protocols, namely Basic
Access Control [R11], Supplementary Access Control [R17], Active Authentication [R38], Extended
Access Control ([R12] and [R13]), the Basic Access Protection [R9] and Extended Access Protection
(compliant to [R9]).
It can host four types of applications as mentioned above, namely the IDL, MRTD, eID and eSign.
Moreover, further configuration may also be done to each type of application to serve use cases
other than those behaviourally defined in the referenced normative documents.
This product is embedded on the ICs described in §1.5 IC identification.
The ID-One Native eDoc architecture can be viewed as shown in the following picture:
Figure 1 - ID-One Native eDoc Overview
NXP P60
Platform
layer
Low layer
Tools modules
Applicative modules
Operating System
Application
layer
Block 1:
MRTD - IDL
Block 2:
eID
Block 3:
eSign
Block 4:
Dauth
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
2.2 TOE overview
The TOE described in this security target is the PACE with AA, CA and PACE_CAM TOE of the product,
a subset of the Block 1 MRTD - IDL.
The block 1 of the ID-One Native eDoc is composed of the following applications:
Applications PP Targeted EAL
MRTD
BAC with CA and AA [R11]
EAL4 + ADV_FSP.5 + ADV_INT.2 + ADV_TDS.4 + ALC_DVS.2 +
ALC_CMS.5 + ALC_TAT.2 + ATE_DPT.3
EAC with AA [R12] EAL5 + ALC_DVS.2 + AVA_VAN.5
EAC with PACE and
AA
[R13] EAL5 + ALC_DVS.2 + AVA_VAN.5
PACE with CA,
PACE_CAM and AA
[R14] EAL5 + ALC_DVS.2 + AVA_VAN.5
IDL
BAP X
EAL4 + ADV_FSP.5 + ADV_INT.2 + ADV_TDS.4 + ALC_DVS.2 +
ALC_CMS.5 + ALC_TAT.2 + ATE_DPT.3
EAC and BAP X EAL5 + ALC_DVS.2 + AVA_VAN.5
PACE X EAL5 + ALC_DVS.2 + AVA_VAN.5
PACE and EAC X EAL5 + ALC_DVS.2 + AVA_VAN.5
Table 4 - Block 1 Applications overview
Figure 2 - Block 1 Overview
The PACE TOE is instantiated during the product prepersonalization, using the operating system that
creates the MF / DF required for the PACE configuration.
The TOE life cycle is described in §4 TOE life cycle.
Block 1:
MRTD & IDL MRTD BAC MRTD EAC MRTD EAC with
PACE
IDL BAP & EAC IDL PACE & EAC
MRTD PACE
IDL PACE
IDL BAP
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
The TOE identification is described in §1.4 TOE technical identification.
Nota bene
The TOE scope encompasses the following features:
- PACE (Password Authenticated Connection Establishment)
- PACE CAM (Password Authenticated Connection Establishment with Chip Authentication
Mapping)
- Active Authentication
- Chip Authentication
- Prepersonalization phase
- Additional code loading
Nevertheless, the TOE can embed other secure functionalities, but they are not in the scope of this
TOE and subject to an evaluation in other TOEs.
2.3 TOE usages
Organisation issues MRDs to be used by the holder to prove his/her identity and claiming associated
rights. For instance, it can be used to check identity at customs in an MRD configuration, verifying
authenticity of electronic visa stored on the card and correspondence with the holder.
In order to pass successfully the control, the holder presents its personal MRD to the inspection
system to first prove his/her identity. The inspection system is under control of an authorised agent
and can be either a desktop device such as those present in airports or a portable device to be used
on the field.
The MRD in context of this security target contains:
- Visual (eye readable) biographical data and portrait of the holder printed in the card
- A separate data summary keydoc) for visual and machine reading using OCR methods in the
Machine Readable Zone (keydoc area)
- And data elements stored on the TOE’s chip for dual, contact and contact-less machine
reading.
The authentication of the holder is based on:
- The possession of a valid MRD personalized for a holder with the claimed identity as given on
the biographical data page and
- The Biometric matching performed on the Inspection system using the reference data stored
in the MRD.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
When holder has been authenticated the issuing Organization can performed extra authentications
in order to gain rights required to grant access to some sensitive information such as “visa
information”…
The issuing Organization ensures the authenticity of the data of genuine MRDs. The receiving
Organization trusts a genuine MRD of an issuing Organization.
The MRD can be viewed as the combination:
- A physical MRD in form of paper or plastic with an embedded chip and possibly an antenna.
It presents visual readable data including (but not limited to) personal data of the MRD
holder
o The biographical data on the biographical data page of the Driving Licence Document
o The printed data in the Machine-Readable Zone (keydoc)keydoc area that identifies
the device
o The printed portrait
- A logical MRD as data of the MRD holder stored according to the Logical Data Structure as
specified by ICAO and extended in [R7], [R8], [R9] on the contactless integrated circuit. It
presents contact or contact-less readable data including (but not limited to) personal data of
the MRD holder
o The digital Machine Readable Zone Data (keydoc data, DG1)
o The digitized portraits
o The optional biometric reference data of finger(s) or iris image(s) or both
o The other data according to LDS (up to DG24)
o The Document security object
The issuing Organization implements security features of the MRD to maintain the authenticity and
integrity of the MRD and its data. The MRD as the physical device and the MRD’s chip is uniquely
identified by the document number.
The physical MRD is protected by physical security measures (e.g. watermark on paper, security
printing), logical (e.g. authentication keys of the MRD’s chip) and organisational security measures
(e.g. control of materials, personalization procedures). These security measures include the binding
of the MRD’s chip to the physical support.
The logical MRD is protected in authenticity and integrity by a digital signature created by the
document signer acting for the issuing Organization and the security features of the MRD’s chip.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
2.4 TOE definition
The Target of Evaluation (TOE) is the contact, contactless and dual integrated circuit chip of machine
readable documents (MRD’s chip) programmed according to the Logical Data Structure (LDS) and
providing feature:
- Active Authentication
- Chip Authentication
- PACE
- PACE CAM
The TOE comprises at least:
- Circuitry of the MRD’s chip (the integrated circuit, IC)
- IC Dedicated Software with the parts IC Dedicated Test Software and IC Dedicated Support
Software
- IC Embedded Software (operating system)
- MRD application
- Associated guidance documentation
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
3 TOE ARCHITECTURE
The TOE is a smartcard, composed of various modules and composed of the following components:
Figure 3 - TOE architecture
3.1 Integrated Circuit - NXP P60
The TOE is embedded on NXP chips, as presented in Table 3 - Chip Identification.
More information on the chips are given in the related security targets.
Application
layer Block 1: MRTD & IDL
Block
2
Block
3
Block
4
Resident Application
IDL BAP &
EAC
IDL BAP
IDL PACE &
EAC
Platform
layer Low layer
Tools modules
Applicative modules
Operating System
BAC EAC
PACE
EAC w
PACE
eDoc Application
IDL PACE
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
3.2 Low layer
The low layer developed by Oberthur Technologies provides an efficient and easy way to access chip
features from the applications. Indeed, it is based on services organized according to a multi-layer
design which allows applications to use a high level interface completely independent of the chip.
The main features of the OS are the following:
- EEPROM management including secure data processing,
- Other memories management,
- Transaction management,
- APDU protocol management,
- Low level T=0 ; T=1 and T=CL management,
- Error processing,
- Advanced securities activation.
A dedicated cryptographic library has been developed and designed by Oberthur Technologies to
provide the highest security level and best tuned performances. It provides the following algorithms:
Cryptographic Feature Embedded
SHA1, SHA-224, SHA-256, SHA-384 and SHA-512 bits
RSA CRT from 1024, to 4096 bits (by steps of 256 bits):
- signature/verification
- key pair generation
RSA SFM from 1024 to 4096 bits (by steps of 256 bits):
- signature/verification
- key pair generation
ECC with key sizes from 192 to 521 bits :
- signature/verification (ECDSA)
- key agreement (ECDH)
- key pair generation
3DES with 112 bits key size
AES with 128, 192, 256 key sizes
Random Generator compliant AIS31
Diffie Hellman from 1024 to 2048 :
- key agreement
- key generation
Integrated mapping over prime field and Elliptic curves
Table 5 - OT Cryptographic library
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
More information is available in complete ST.
3.3 Tools modules
The tools modules provide IDL full EAC v2 product:
- File system compliant with ISO/IEC 7816-4 and ISO/IEC 7816-9. It is also compliant with ICAO
recommendations [R2].
- ISO Secure Messaging as specified in [R19] and as described in annex E of [R40].
- PIN and BIO access rights management as presented in § 2.5 of [R39] and B.6 of [R40]
- Asymmetric Keys Management as storage, signature, verification, DH and generation.
- Symmetric Key management
- Access Control for ‘Change MSK’ and ‘PUT KEY’ APDU
- Authentication and secure messaging to be used during Prepersonalization and
Personalization phases, based on Global Platform standard
More information is available in complete ST.
3.4 Applicative modules
The applicative modules provide IDL full EAC v2 product:
- Chip Authentication version 1 as described in [R38] and version 2 as described in [R39], an
ephemeral-static Diffie-Hellman key agreement protocol that provides secure
communication and unilateral authentication of the IDL chip.
- Terminal Authentication version 1 as described in [R38] and version 2 as described in [R39], a
two move challenge-response protocol that provides explicit unilateral authentication of the
terminal.
- PACE Protocol as specified in [R17], a password authenticated Diffie-Hellman key agreement
protocol that provides secure communication and explicit password-based authentication of
the IDL chip and the terminal.
- Access Conditions Engine that checks the AC rules attached to an object (file, key, data
object) with a current context (CHA, Role ID…). For applications already defined by normative
documents such as eMRTD, iDL, eID and eSign, the application embeds ROMed access
condition rules.
- Another applicative module is the Digital Blurred Image (DBI) module. It allows the blurring
of a JPG or JPEG2000 file stored in a transparent file. This feature is the implementation of
patents owned by Oberthur Technologies. This module is part of the TOE and outside the
scope of this present certification.
More information is available in complete ST.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
3.5 Operating System
This application manages the TOE in pre-personalization and personalization phases in order to
configure the TOE in the expected way. It implements and control access to Key management (MSK,
LSK), File management including data reading and writing or additional code loading. It can be
addressed in clear mode for secure environment or non-sensitive commands, using SCP02 or SCP03.
More information is available in complete ST.
3.6 Application layer
Two kinds of dispatcher are available on the top of the product: the resident application that is used
for Personalization Phase and for administration during Use Phase and the eDoc application that is
used during the Use Phase of MRD Applications.
The application layer also manages protocols available during Use phase such as Basic Access
Protection, Chip Authentication, Password Authenticated Connection Establishment or Active
Authentication.
The Basic Access Protection (BAP) is especially used in the context of IDL as an alternative to BAC.
Indeed it is actually a generalisation of BAC allowing usage of extra algorithms and key length. It
exists in 4 modes:
BAP1 - 3DES with key length of 128 bits (equivalent to BAC),
BAP2 - AES with key length of 128 bits,
BAP3 - AES with key length of 192 bits,
BAP4 - AES with key length of 256 bits.
Following Secure messaging is performed using the algorithm used in the selected BAP mode.
Note that the term MRZ is specific to ICAO standard; [R8] uses the term “Keydoc” which refers to an
equivalent unique identifier printed on the physical TOE as a random number or barcode.
The Extended Access Control (EAC) enhances the latest security features and ensures a strong and
mutual authentication of the TOE and the Inspection system. This step is required to access biometric
data such as fingerprints and iris stored in DG3 and DG4. In particular, the authentication steps
ensures a strong secure channel able to provide confidentiality of the biometric data that are read
and authentication of the Inspection system retrieving the date to perform a Match on Terminal
comparison. The Extended Access Control authentication steps may be performed either with elliptic
curve cryptography, or with RSA cryptography.
This application uses the Chip Authentication and then after the Terminal Authentication .
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
The protocol for Basic Access Control is specified by ICAO [R2]. Basic Access Control checks that the
terminal has physical access to the MRTD’s data page. This is enforced by requiring the terminal to
derive an authentication key from the optically read MRZ of the MRTD. The protocol for Basic Access
Control is based on ISO/IEC 11770-2 [R35] key establishment mechanism 6. This protocol is also used
to generate session keys that are used to protect the confidentiality (and integrity) of the transmitted
data.
The inspection system:
- Reads the printed data in the MRZ (for MRTD),
- Authenticates itself as inspection system by means of keys derived from MRZ data.
After successful 3DES based authentication, the TOE provides read access to data requiring BAC
rights by means of a private communication (secure messaging) with the inspection system.
The protocol for Basic Access Control is specified by ICAO. Basic Access Control checks that the
terminal has physical access to the MRTD’s data page. This is enforced by requiring the terminal to
derive an authentication key from the optically read MRZ of the MRTD. The protocol for Basic Access
Control is based on ISO/IEC 11770-2 [R35] key establishment mechanism 6. This protocol is also used
to generate session keys that are used to protect the confidentiality (and integrity) of the transmitted
data.
The Active Authentication of the TOE is an optional feature that may be implemented. It ensures that
the TOE has not been “cloned”, by means of a challenge-response protocol between the Inspection
System and the TOE. For this purpose the chip contains its own Active Authentication RSA or ECC Key
pair. A hash representation of Data Group containing the Verification Public Key and attributes
(algorithm...) is stored in the Document Security Object (SOD) and therefore authenticated by the
issuer’s digital signature. The corresponding Private Key is stored in the TOE’s secure memory.
The TOE supports the loading and generation of the Active Authentication RSA or ECC Key pair.
The Password Authenticated Connection Establishment (PACE) is a security feature that is supported
by the TOE. The Inspection System:
- Reads the printed data in the KEYDOC (for eMRD) or the CAN (the holder may as well enter it
itself).
- Authenticates itself as Inspection System by means of keys derived from KEYDOC or CAN
data. After successful 3DES based authentication, the TOE provides read access to data
requiring PACE rights by means of a private communication (secure messaging) with the
Inspection System.
More information is available in complete ST.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
4 TOE LIFE CYCLE
4.1 Life cycle overview
Figure 4: Smartcard product life-cycle for the TOE
Phase 1
Phase 2
Phase 3
Phase 4
Testing
Phase 5 Testing
Testing
Phase 6
Phase 7
ALC
phase
AGD
phase
USE
phase
AGD PRE
TOE delivery point
Card printing
Micromodule
Embedding
Prepersonalization
Personalization
Software development
Patch development
IC photomask
fabrication
IC database
construction
IC manufacturing IC testing
Smartcard
End of life
Application
End of life
Smartcard
product
End usage
Application
End usage AGD OPE
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
The TOE life-cycle is described in terms of four life-cycle phases. (With respect to the [R10], the TOE
life-cycle is additionally subdivided into 7 steps.)
Additional codes are identified in §1.5.
The table below presents the TOE role:
Roles Subject
IC developer NXP Semiconductors
IC manufacturer NXP Semiconductors
TOE developer Oberthur Technologies
Manufacturer NXP Semiconductors
Oberthur Technologies or another agent
Prepersonalizer Oberthur Technologies or another agent
Personalization Agent Oberthur Technologies or another agent
Table 6 - Roles identification on the life cycle
The table below presents the subjects following TOE life cycle steps in accordance with the standard
smart card life cycle [R10], the Protection Profile lifecycle in phases, the TOE delivery point and the
coverage:
Steps Phase Subject Covered by Sites
Step 1
Development
Oberthur Technologies ALC R&D sites
Pessac and
Colombes
Step 2 Development NXP Semiconductors IC certification IC certification
Step 3 Manufacturing NXP Semiconductors IC certification IC certification
TOE delivery point
Step 4
Manufacturing MRD Manufacturer
(Prepersonalizer)
AGD_PRE
Step 5
Manufacturing MRD Manufacturer
(Prepersonalizer)
AGD_PRE
Step 6 Personalization Personalization Agent AGD_PRE
Step 7 Operational Use End user AGD_OPE
Table 7 - Subjects identification following life cycle steps
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
4.2 Phase 1 “Development”
(Step1) The TOE is developed in phase 1. The IC developer develops the integrated circuit, the IC
Dedicated Software and the guidance documentation associated with these TOE components.
(Step2) The TOE developer uses the guidance documentation for the integrated circuit and the
guidance documentation for relevant parts of the IC Dedicated Software and develops the IC
Embedded Software (operating system), the IDL application and the guidance documentation
associated with these TOE components.
The manufacturing documentation of the IC including the IC Dedicated Software and the Embedded
Software in the non-volatile non-programmable memories is securely delivered to the IC
manufacturer. The IC Embedded Software in the non-volatile programmable memories, the eIDL
application and the guidance documentation is securely delivered to the Manufacturer.
4.3 Phase 2 “Manufacturing”
(Step3) In a first step the TOE integrated circuit is produced containing the document’s chip
Dedicated Software and the parts of the document’s chip Embedded Software in the non-volatile
non-programmable memories (ROM). The IC manufacturer writes the IC Identification Data onto the
chip to control the IC as travel document material during the IC manufacturing and the delivery
process to the Manufacturer. The IC is securely delivered from the IC manufacture to the
Manufacturer. If necessary the IC manufacturer adds the parts of the IC Embedded Software in the
non-volatile programmable memories (for instance EEPROM). The IC manufacturer adds initialization
data in EEPROM and keys (MSK, LSK).
TOE delivery point
(Step4) The Manufacturer combines the IC with hardware for the contact based / contactless
interface in the travel document unless the travel document consists of the card only.
(Step5) The Manufacturer (i) adds the IC Embedded Software or part of it and the additional source
code in the non-volatile programmable memories if necessary, (ii) creates the eIDL application, and
(iii) equips travel document’s chips with pre-personalization Data.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
The pre-personalised travel document together with the IC Identifier is securely delivered from the
Manufacturer to the Personalization Agent. The Manufacturer also provides the relevant parts of the
guidance documentation to the Personalization Agent.
Additional code loading is performed in Prepersonalization phase. It is compliant to ANSSI Note 6
[R44].
The additional code loading process is performed by the Prepersonalizer in the following steps, via
the Command LOAD SECURE:
- Additional code generation
- MSK authentication
- LSK derivation
- Memory area definition
- Loading of the additional code
- Secure activation of the additional code
The additional code loading is performed before the creation of the MF file during
Prepersonalization.
Identification of the additional code loading is given in Table 2 - TOE Technical Identification.
Additional code generation
The additional code is generated by Oberthur Technologies: developped, compiled, ciphered and
signed. After generation, it is sent to the MRD manufacturer to that it can load it in the (initial) TOE.
Loading of the additional code
The additional code is loaded in the (initial) TOE by the Prepersonalizer that shall authenticate itself
to the TOE beforehand. Upon reception, the (intial) TOE checks it has been generated by Oberthur
Technologies (by verifying the signature) before activating it.
Identification of the TOE
After successful loading and activation of the additional code, the TOE update its identification data
to reflects the presence of the additional code.
4.4 Phase 3 “Personalization of the travel document”
(Step6) The personalization of the travel document includes (i) the survey of the travel document
holder’s biographical data, (ii) the enrolment of the travel document holder biometric reference data
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
(i.e. the digitized portraits and the optional biometric reference data), (iii) the personalization of the
visual readable data onto the physical part of the travel document, (iv) the writing of the TOE User
Data and TSF Data into the logical travel document and (v) configuration of the TSF if necessary. The
step (iv) is performed by the Personalization Agent and includes but is not limited to the creation of
(i) the digital KEYDOC data (EF.DG1), (ii) the digitized portrait (EF.DG6), and (iii) the Document
security object. The signing of the Document security object by the Document signer finalizes the
personalization of the genuine travel document for the travel document holder. The personalised
travel document (together with appropriate guidance for TOE use if necessary) is handed over to the
travel document holder for operational use.
4.5 Phase 4 “Operational Use”
(Step7) The TOE is used as a travel document's chip by the traveller and the inspection systems in the
“Operational Use” phase. The user data can be read according to the security policy of the issuing
Organisation and can be used according to the security policy of the issuing Organization but they
can never be modified.
Note that the personalization process and its environment may depend on specific security needs of
an issuing Organisation. All production, generation and installation procedures after TOE delivery up
to the “Operational Use” (phase 4) have to be considered in the product evaluation process under
AGD assurance class. Therefore, the Security Target has to outline the split up of P.Manufact,
P.Personalization and the related security objectives into aspects relevant before vs. after TOE
delivery. Some production steps, e.g. Step 4 in Phase 2 may also take place in the Phase 3.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
5 CONFORMANCE CLAIMS
5.1 Common Criteria conformance
This Security Target (ST) claims conformance to the Common Criteria version 3.1 revision 4 [R41],
[R42] and [R43].
The conformance to the CC is claimed as follows:
CC Conformance rationale
Part 1 Strict conformance
Part 2
Conformance to the extended1
part:
- FAU_SAS.1 “Audit Storage”
- FCS_RND.1 “Quality metric for random numbers”
- FMT_LIM.1 “Limited capabilities”
- FMT_LIM.2 “Limited availability”
- FPT_EMS.1 “TOE Emanation”
- FIA_API.1 “Authentication Proof of Identity”
Part 3
Strict conformance to Part 3.
The product claims conformance to EAL 5, augmented with:
- ALC_DVS.2 “Sufficiency of security measures”
- AVA_VAN.5 “Advanced methodical vulnerability
analysis”
Table 8 - Conformance Rationale
5.1.1 Overview of the SFR defined in this ST
SFR are presented in § 9.1 Security Functional Requirements:
- SFR (/Global) that are global to the product (shared between the various TOE)
- SFR (/MP_Add_code) that are dedicated for the patch loading
- SFR (/MP) that are dedicated for the Manufacturing and Personalization phases
- SFR (/AA) that are dedicated for Active Authentication
- SFR (/BAC and /BAP) that are dedicated for Basic Access Protection
- SFR (/CA) that are dedicated for Chip Authentication
- SFR (/PACE) that are dedicated for Password Authenticated Connection Establishment
1
The rationale for SFR addition is described in the relative PP and in this Security Target
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
- SFR (/PACE_CAM) that are dedicated for Password Authenticated Connection Establishment
with Chip Authentication Mapping
The following table presents all the SFR defined in the ST with the generic notation.
SFR from the PP
FCS_CKM.1/DH_PACE ; FCS_CKM.4; FCS_COP.1/PACE_ENC ; FCS_COP.1/PACE_MAC; FCS_RND.1; FIA_AFL.1/PACE;
FIA_UID.1/PACE ; FIA_UAU.1/PACE ; FIA_UAU.4/PACE ; FIA_UAU.5/PACE ; FIA_UAU.6/PACE ; FDP_ACC.1/TRM ;
FDP_ACF.1/TRM ; FDP_RIP.1 ; FDP_UCT.1/TRM; FDP_UIT.1/TRM ; FAU_SAS.1 ; FMT_SMF.1 ; FMT_SMR.1/PACE ;
FMT_LIM.1 ; FMT_LIM.2 ; FMT_MTD.1/INI_ENA ; FMT_MTD.1/INI_DIS ; FMT_MTD.1/KEY_READ ; FMT_MTD.1/PA ;
FPT_EMS.1 ; FPT_FLS.1 ; FPT_TST.1 ; FPT_PHP.3
Table 9 -SFR from the PP
Section Additional SFR
MP
FCS_CKM.1/MP ; FCS_COP.1/MP ; FDP_ACC.2/MP ; FDP_ACF.1/MP ; FDP_ITC.1/MP ;
FDP_UCT.1/MP ; FDP_UIT.1/MP ; FIA_AFL.1/MP ; FIA_UAU.1/MP ; FIA_UID.1/MP ;
FIA_UAU.4/MP ; FIA_UAU.5/MP ; FMT_MTD.1/MP ; FTP_ITC.1/MP ;
FMT_MTD.1/MP_KEY_READ ; FMT_MTD.1/MP_KEY_WRITE
MP Add code
FAU_STG.2/MP_Add_code ; FTP_ITC.1/MP_Add_code ; FCS_CKM.1/MP_Add_code ;
FCS_COP.1/MP_Add_code ; FDP_UIT.1/MP_Add_code ; FMT_MTD.1/MP_Add_code ;
FMT_MTD.1/MP_KEY_READ_Add_code ; FMT_SMR.1/MP_Add_code
Active Authentication
FCS_COP.1/AA ; FDP_DAU.1/AA ; FDP_ITC.1/AA ; FMT_MTD.1/AA_KEY_READ ;
FMT_MOF.1/AA ; FMT_MTD.1/AA_KEY_WRITE
PACE CAM
FIA_UAU.1/PACE_CAM; FIA_UAU.4/PACE_CAM; FIA_UAU.5/PACE_CAM; FIA_UAU.6/PACE_CAM;
FIA_UID.1/PACE_CAM; FMT_MTD.1/CA_KEY_WRITE
Table 10 - Additional SFR
5.1.2 Overview of the additional protocols
5.1.2.1 Chip Authentication
The Chip Authentication has been added to this Security Target in order to reinforce the BAP
authentication mechanism by ensuring the verification of the Card by the Terminal. For this addition,
the TOE SPD has been refined and contains the following additions:
- Additional Threats: § 6.3.2 Threats for CA
- Additional Objective: § 7.1.2 SO for CA
- Additional OE: § 7.2.2 OE for CA
5.1.2.2 Active Authentication
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
The additional functionality of Active Authentication (AA) is based on the ICAO PKI V1.1 and the
related on-card generation of RSA and ECC keys.
It implies the following addition to the standard PP:
- Additional Threats: § 6.3.3 Threats for AA
- Additional Objective: § 7.1.3 SO for AA
- Additional OE: § 7.2.3 OE for AA
5.1.2.3 Prepersonalization phase
The prepersonalization phase has been reinforced in this Security Target, with the following
elements.
This functionality is usable in phase 5 and phase 6. Once the product is locked, stated as
personalized, it is no more possible to perform this operation. The following addition has been
performed:
- Additional Threats: § 6.3.4 Threats for Note 6
- Additional Objective: § 7.1.4 SO for Note 6
The TOE is compliant to the last version (draft) of ANSSI Note 6 [R44].
5.1.2.4 PACE CAM
The additional functionality of Password Authenticated Connection Establishment with Chip
Authentication Mapping (PACE CAM) has been added to the TOE.
It possesses the same security requirements than the PACE functionality, that means that the same
SPD applies to the PACE CAM.
Additional SFR has been defined for defining the PACE CAM security functional requirements.
5.2 Protection Profile conformance
This security target is based on the following protection profiles:
- BSI-CC-PP-0068-V2-2011:”Machine Readable Travel Document using Standard Inspection
Procedure with PACE” [R14]
For consistency reasons, editorial modifications have been performed to the security target (according to the
standard ISO 18013-3):
- BAC replaced by BAP
- MRTD replaced by MRD
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
- DG2 replaced by DG6
- DG3 replaced by DG7
- DG4 replaced by DG8
- DG15 replaced by DG13
- State replaced by organization
- MRZ replaced by keydoc
- Reference to EF.COM for access control rules (which specifies which DG is protected by BAP
or EAP)
5.3 Rationale for the additions
The rationales are available in the complete ST.
5.4 Non evaluated features
In order to be powered up and to communicate with the ‘external world’ the TOE needs a terminal
(card reader) supporting the contactless/contact based communication according to [7]and [8]. From
the logical point of view, the TOE shall be able to recognise the following terminal type, which,
hence, shall be available:
- Basic Inspection System with PACE
The TOE shall require terminals to evince possessing authorisation information (a shared secret)
before access according to [4], option ‘PACE’ is granted. To authenticate a terminal as a basic
inspection system with PACE, Standard Inspection Procedure must be used.
In scope of this Protection Profile the following types of inspection systems shall be distinguished:
- BIS-PACE: Basic Inspection System with PACE
- BIS-BAC: Basic Inspection System with BAC
The current PP defines security policy for the usage of onlyBasic Inspection System with PACE (BIS-
PACE) in the context of the IDL application.
Using other types of inspection systems and terminals is out of the scope of the current PP. Some
developers might decide to implement their products being downwardly compatible with ICAO-
terminals, so that they also functionally support Basic Access Control (BAC). However, any product
using BAC will not be conformant to the current PP; i.e. a product implementing the TOE may
functionally use BAC, but, while performing BAC, they are acting outside of security policy defined by
the current PP. Therefore, Organizations being responsible for the operation of inspection systems
shall be aware of this context.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Some features may be part of the TOE but are not evaluated as they are not relevant for the TSFs:
- Standard and biometric PIN management
- File system management
- DBI
The TOE may also contain other applications such as eID, eSign, …..The current evaluation covers any
combination of application.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
6 SECURITY PROBLEM DEFINITION
6.1 Subjects
6.1.1 PP PACE subjects
Travel document holder (MRD holder)
A person for whom the travel document Issuer has personalised the travel document. This entity is
commensurate with ‘MRD Holder’ in [R11]. Please note that a travel document holder can also be an
attacker.
Travel document presenter (Traveler)
A person presenting the travel document to a terminal and claiming the identity of the travel
document holder. This external entity is commensurate with ‘Traveller’ in [R11]. Please note that a
travel document presenter can also be an attacker (s. below).
Terminal
A terminal is any technical system communicating with the TOE through the contactless/contact
interface. The role ‘Terminal’ is the default role for any terminal being recognised by the TOE as not
being PACE authenticated (‘Terminal’ is used by the travel document presenter). This entity is
commensurate with ‘Terminal’ in [R11].
Basic Inspection System with PACE (BIS-PACE)
A technical system being used by an inspecting authority and verifying the travel document
presenteras the travel documentholder (for IDL: by comparing the real biometric data (face) of the
travel document presenter with the stored biometric data (DG6) of the travel document holder).
BIS-PACE implements the terminal’s part of the PACE protocol and authenticates itself to the travel
document using a shared password (PACE password) and supports Passive Authentication.
Document Signer (DS)
An Organization enforcing the policy of the CSCA and signing the Document Security Object stored on
the travel document for passive authentication. A Document Signer is authorised by the national
CSCA
issuing the Document Signer Certificate (CDS), see [R2]. This role is usually delegated to a
Personalisation Agent.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Country Signing Certification Authority (CSCA)
An Organization enforcing the policy of the travel document Issuer with respect to confirming
correctness of user and TSF data stored in the travel document. The CSCA represents the country
specific root of the PKI for the travel document and creates the Document Signer Certificates within
this PKI.
The CSCA also issues the self-signed CSCA Certificate (CCSCA) having to be distributed by strictly secure
diplomatic means, see [R2].
Personalisation Agent
An Organization acting on behalf of the travel document Issuer to personalise the travel document
for the travel document holder by some or all of the following activities:
(i) Establishing the identity of the travel document holder for the biographic data in the
travel document
(ii) Enrolling the biometric reference data of the travel document holder
(iii) Writing a subset of these data on the physical travel document (optical personalisation)
and storing them in the travel document (electronic personalisation) for the travel
document holder as defined in [R2]
(iv) Writing the document details data
(v) Writing the initial TSF data
(vi) Signing the Document Security Object defined in [R2] (in the role of DS).
Please note that the role ‘Personalisation Agent’ may be distributed among several institutions
according to the operational policy of the travel document Issuer.
This entity is commensurate with ‘Personalisation agent’ in [R11].
Application Note
Personalization Agent is refered as the Personalizer in the Security Target
Manufacturer
Generic term for the IC Manufacturer producing integrated circuit and the travel document
Manufacturer completing the IC to the travel document. The Manufacturer is the default user of the
TOE during the manufacturing life cycle phase. The TOE itself does not distinguish between the IC
Manufacturer and travel document Manufacturer using this role Manufacturer.
This entity is commensurate with ‘Manufacturer’ in [R11].
Attacker
A threat agent (a person or a process acting on his behalf) trying to undermine the security policy
defined by the current PP, especially to change properties of the assets having to be maintained. The
attacker is assumed to possess an at most high attack potential.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Please note that the attacker might ‘capture’ any subject role recognised by the TOE.
This external entity is commensurate with ‘Attacker’ in [R11].
6.1.2 Additional Subjects
IC Developer
Developer of the IC.
TOE Developer
Developer of part of the TOE source code.
Prepersonalizer
Agent in charge of the Prepersonalization. This agent corresponds to the MRD manufacturer as
described in [R11].
6.2 Assets
6.2.1 Primary assets
All these primary assets represent User Data in the sense of the Common Criteria. Please note that
user data being referred in this chapter include, amongst other, individual-related (personal) data of
the travel document holder which also include his sensitive (i.e. biometric) data. Hence, the general
security policy defined by the current PP also secures these specific travel document holder’s data as
stated in this chapter.
User data stored on the TOE
Protection: Confidentiality, Integrity, Authenticity
All data (being not authentication data) stored in the context of the eMRD application of the travel
document as defined in [R2] and being allowed to be read out solely by an authenticated terminal
acting as Basic Inspection System with PACE (in the sense of [R2])
This asset covers ‘User Data on the MRD’s chip’, ‘Logical MRD Data’ and ‘Sensitive User Data’ in
[R11].
User Data Description
CPLC Data Data uniquely identifying the chip. They are considered as user
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
data as they enable to track the holder
Sensitive biometric reference data
(EF.DG3, EF.DG4)
Contain the fingerprint and the iris picture
Chip Authentication Public Key
and attributes in EF.DG14
Contain public data enabling to authenticate the chip thanks to
a chip authentication
Active Authentication Public Key
and attributes in EF.DG13
Contain public data enabling to authenticate the chip thanks to
an active authentication
Table 1: User data stored on the TOE
User data transferred between the TOE and the terminal connected
Protection: Confidentiality, Integrity, Authenticity
All data (being not authentication data) being transferred in the context of the eMRD application of
the travel document between the TOE and an authenticated terminal acting as Basic Inspection
System with PACE (in the sense of [R2]).
User data can be received and sent (exchange <--> [receive, send]).
Travel document tracing data
Protection: Unavailability
Technical information about the current and previous locations of the travel document gathered
unnoticeable by the travel document holder recognising the TOE not knowing any PACE password.
TOE tracing data can be provided / gathered.
6.2.2 Secondary assets
Accessibility to the TOE functions and data only for authorised subjects
Protection: Availability
Property of the TOE to restrict access to TSF and TSF-data stored in the TOE to authorised subjects
only.
TSF data Description
Personalisation Agent reference
authentication Data
Private key enabling to authenticate the Personalisation
agent (same as PACE ST)
Password Authenticated Connection
Establishment (PACE) Key
Master keys used to established a trusted channel
between the Basic Inspection Terminal and the travel
document (same as PACE ST)
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Session keys for the secure channel
Session keys used to protect the communication in
confidentiality and in integrity
Table 2: Accessibility to the TOE functions and data only for authorised subjects
Genuineness of the TOE
Protection: Availability
Property of the TOE to be authentic in order to provide claimed security functionality in a proper
way. This asset also covers ‘Authenticity of the SIC’’ in [R11].
TSF data Description
TOE_ID Data enabling to identify the TOE
Chip Authentication private Key Private key the chip uses to perform a chip authentication
Active Authentication private key
Private key the chip uses to perform an active
authentication
Current Date Current date of the travel document
Table 3: Genuineness of the TOE
TOE internal secret cryptographic keys
Protection: Confidentiality, Integrity
Permanently or temporarily stored secret cryptographic material used by the TOE in order to enforce
its security functionality.
TSF data Description
Personalisation Agent reference
authentication Data
Private key enabling to authenticate the Personalisation agent
Password Authenticated
Connection Establishment
(PACE) Key
Master keys used to established a trusted channel between the
Basic Inspection Terminal and the travel document
Chip Authentication private Key Private key the chip uses to perform a chip authentication
Active Authentication private
key
Private key the chip uses to perform an active authentication
Session keys for the secure
channel
Session keys used to protect the communication in
confidentiality and in integrity
MSK
Manufacturer Secret Key used to perform the authentication of
the personal agent in pre-personalisation phase
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
TSF data Description
LSK
Loading Secure Key used to load Optional Code in pre-
personalisation phase
Table 4: TOE internal secret cryptographic keys
TOE internal non-secret cryptographic material
Protection: Confidentiatity, Integrity
Permanently or temporarily stored non-secret cryptographic (public) keys and other non-secret
material (Document Security Object SOD containing digital signature) used by the TOE in order to
enforce its security functionality.
TSF data Description
TOE_ID Data enabling to identify the TOE and the TOE Configuration
Life Cycle State Life Cycle state of the TOE
Public Key CVCA Trust point of the travel document stored in persistent memory
CVCA Certificate All the data related to the CVCA key (expiration date, name,..) stored in
persistent memory
Current Date Current date of the travel document
Table 5: TOE internal non-secret cryptographic material
Travel Document communication establishment authorisation data
Protection: Confidentiatity, Integrity
Restricted-revealable authorization information for a human user being used for verification of the
authorisation attempts as authorised user (PACE password). These data are stored in the TOE and are
not to be send to it.
TSF data Description
PACE password
(KEYDOC or CAN)
Reference information being persistently stored in the TOE and allowing PACE
authentication
Table 6: Travel Document communication establishment authorisation data
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
6.3 Threats
This section describes the threats to be averted by the TOE independently or in collaboration with its
IT environment. These threats result from the TOE method of use in the operational environment
and the assets stored in or protected by the TOE.
6.3.1 Threats from the PP PACE
T.Skimming
Adverse action
An attacker imitates an inspection system in order to get access to the user data stored on or
transferred between the TOE and the inspecting authority connected via the contactless/contact
interface of the TOE.
Threat agent
Having high attack potential, cannot read and does not know the correct value of the shared
password (PACE password) in advance.
Asset
Confidentiality of logical travel document data
T.Eavesdropping
Adverse action
An attacker is listening to the communication between the travel document and the PACE
authenticated BIS-PACE in order to gain the user data transferred between the TOE and the terminal
connected.
Threat agent
Having high attack potential, cannot read and does not know the correct value of the shared
password (PACE password) in advance.
Asset
Confidentiality of logical travel document data
T.Tracing
Adverse action
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
An attacker tries to gather TOE tracing data (i.e. to trace the movement of the travel document)
unambiguously identifying it remotely by establishing or listening to a communication via the
contactless/contact interface of the TOE.
Threat agent
Having high attack potential, cannot read and does not know the correct value of the shared
password (PACE password) in advance.
Asset
Privacy of the travel document holder
T.Forgery
Adverse action
An attacker fraudulently alters the User Data or/and TSF-data stored on the travel document or/and
exchanged between the TOE and the terminal connected in order to outsmart the PACE
authenticated BIS-PACE by means of changed travel document holder’s related reference data (like
biographic or biometric data). The attacker does it in such a way that the terminal connected
perceives these modified data as authentic one.
Threat agent
Having high attack potential
Asset
Integrity of the travel document.
T.Abuse-Func
Adverse action
An attacker may use functions of the TOE which shall not be used in TOE operational phase in order:
(i) To manipulate or to disclose the User Data stored in the TOE
(ii) To manipulate or to disclose the TSF-data stored in the TOE
(iii) To manipulate (bypass, deactivate or modify) soft coded security functionality of the TOE
This threat addresses the misuse of the functions for the initialization and the personalization in the
operational phase after delivery to MRD holder.
Threat agent
Having high attack potential, being in possession of one or more legitimate MRD.
Asset
Integrity and authenticity of logical MRD, availability of the functionality of the MRD.
T.Information_Leakage
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Adverse action
An attacker may exploit information leaking from the TOE during its usage in order to disclose
confidential User Data or/and TSF-data stored on the travel document or/and exchanged between
the TOE and the terminal connected. The information leakage may be inherent in the normal
operation or caused by the attacker.
Threat agent
Having high attack potential
Asset
Confidentiality of User Data and TSF data of the travel document
T.Phys-Tamper
Adverse action
An attacker may perform physical probing of the MRD’s chip in order to
(i) Disclose TSF Data or
(ii) Disclose/reconstruct the MRD’s chip Embedded Software.
An attacker may physically modify the MRD’s chip in order to alter
(i) Its security functionality (hardware and software part, as well)
(ii) The user Data or the TSF data stored on the MRD
Threat agent
Having high attack potential, being in possession of a legitimate MRD.
Asset
Integrity and authenticity of logical MRD, availability of the functionality of the MRD, confidentiality
of User Data and TSF-data of the MRD
T.Malfunction
Adverse action
An attacker may cause a malfunction of TSF or of the MRD’s chip Embedded Software by applying
environmental stress in order to
(i) Deactivate or modify security features or functions of the TOE
(ii) Circumvent, deactivate or modify security functions of the MRD’s chip Embedded
Software.
This may be achieved e.g. by operating the MRD’s chip outside the normal operating conditions,
exploiting errors in the MRD’s chip Embedded Software or misusing administration function. To
exploit these vulnerabilities an attacker needs information about the functional operation.
Threat agent
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Having high attack potential, being in possession of one or more legitimate MRD, having information
about the functional operation
Asset
Integrity and authenticity of the travel document, availability of the functionality of the travel
document, confidentiality of User Data and TSF-data of the travel document
6.3.2 Threats for CA
T.Counterfeit
Adverse action: An attacker with high attack potential produces an unauthorized copy or
reproduction of a genuine MRD's chip to be used as part of a counterfeit MRD. This violates the
authenticity of the MRD's chip used for authentication of a holder by possession of a MRD. The
attacker may generate a new data set or extract completely or partially the data from a genuine
MRD's chip and copy them on another appropriate chip to imitate this genuine MRD's chip.
Threat agent: having high attack potential, being in possession of one or more legitimate MRDs
Asset: authenticity of logical MRD data
6.3.3 Threats for AA
T.Counterfeit
6.3.4 Threats for Note 6
T.Unauthorized_Load
Adverse action: An attacker tries to load an additional code that is not intended to be assembled with
the initial TOE, ie the evidence of authenticity or integrity is not correct.
Threat agent: having high attack potential, knowing the MSK, LSK and derivation data, being in
possession of a legitimate MRD
Asset: Logical MRD data
T.Bad_Activation
Adverse action: An attacker tries to perturbate the additional code activation such as the final TOE is
different than the expected one (initial TOE or perturbated TOE).
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Threat agent: having high attack potential, knowing the MSK, LSK and derivation data, being in
possession of a legitimate MRD, being in possession of an additional code that is authorized to be
load
Asset: Logical MRD data
T.TOE_Identification_Forgery
Adverse action: An attacker tries to perturbate the TOE identification and in particular the additional
code identification.
Threat agent: having high attack potential, being in possession of a legitimate MRD
Asset: TOE_ID
Application Note
This threat is not applicable in phase 7, as the TOE identification is not possible in phase 7.
6.4 Organisational Security Policies
6.4.1 OSP from PP PACE
P.Manufact
The Initialization Data are written by the IC Manufacturer to identify the IC uniquely. The MRD
Manufacturer writes the Pre-personalization Data which contains at least the Personalization Agent
Key.
P.Pre-Operational
1) The travel document Issuer issues the travel document and approves it using the terminals
complying with all applicable laws and regulations.
2) The travel document Issuer guarantees correctness of the user data (amongst other of those,
concerning the travel document holder) and of the TSF-data permanently stored in the TOE.
3) The travel document Issuer uses only such TOE’s technical components (IC) which enable
traceability of the travel documents in their manufacturing and issuing life cycle phases, i.e. before
they are in the operational phase.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
4) If the travel document Issuer authorises a Personalisation Agent to personalise the travel
document for travel document holders, the travel document Issuer has to ensure that the
Personalisation Agent acts in accordance with the travel document Issuer’s policy.
P.Card_PKI
1) The travel document Issuer shall establish a public key infrastructure for the passive
authentication, i.e. for digital signature creation and verification for the travel document. For this
aim, he runs a Country Signing Certification Authority (CSCA). The travel document Issuer shall
publish the CSCA Certificate (CCSCA)
2) The CSCA shall securely generate, store and use the CSCA key pair. The CSCA shall keep the CSCA
Private Key secret and issue a self-signed CSCA Certificate (CCSCA) having to be made available to the
travel document Issuer by strictly secure means, see [R17]. The CSCA shall create the Document
Signer Certificates for the Document Signer Public Keys (CDS) and make them available to the travel
document Issue.
3) A Document Signer shall:
(i) Generate the Document Signer Key Pair
(ii) Hand over the Document Signer Public Key to the CSCA for certification
(iii) Keep the Document Signer Private Key secret
(iv) Securely use the Document Signer Private Key for signing the Document Security
Objects of travel documents.
P.Trustworthy_PKI
The CSCA shall ensure that it issues its certificates exclusively to the rightful Organizations (DS) and
DSs shall ensure that they sign exclusively correct Document Security Objects to be stored on the
travel document.
P.Terminal
The Basic Inspection Systems with PACE (BIS-PACE) shall operate their terminals as follows:
1) The related terminals shall be used by terminal operators and by travel document holders
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
2) They shall implement the terminal parts of the PACE protocol [R17], of the Passive Authentication
[R2] and use them in this order. The PACE terminal shall use randomly and (almost) uniformly
selected nonces, if required by the protocols (for generating ephemeral keys for Diffie-Hellmann)
3) The related terminals need not to use any own credentials
4) They shall also store the Country Signing Public Key and the Document Signer Public Key (in form
of CCSCA and CDS) in order to enable and to perform Passive Authentication (determination of the
authenticity of data groups stored in the travel document, [R2])
5) The related terminals and their environment shall ensure confidentiality and integrity of respective
data handled by them (e.g. confidentiality of PACE passwords, integrity of PKI certificates, etc.),
where it is necessary for a secure operation of the TOE
6.4.2 OSP for CA
P.Chip_Auth
The terminal implements the Chip Authentication protocol as described in [R38].
6.4.3 OSP for AA
P.Activ_Auth
The terminal implements the Active Authentication protocol as described in [R38].
6.5 Assumptions
The assumptions describe the security aspects of the environment in which the TOE will be used or is
intended to be used. The Assumptions are taken from the PP EAC with PACE, which requires to
include also some Assumptions described in the PP PACE.
6.5.1 Assumptions from PP PACE
A.Passive_Auth
The issuing and Receiving Organizations or Organizations establish a public key infrastructure for
passive authentication i.e. digital signature creation and verification for the logical travel document.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
The Issuing Organization runs a Certification Authority (CA) which securely generates, stores and uses
the Country Signing CA Key pair. The CA keeps the Country Signing CA Private Key secret and is
recommended to distribute the Country Signing CA Public Key to ICAO, all Receiving Organizations
maintaining its integrity.
The Document Signer
(i) Generates the Document Signer Key Pair
(ii) Hands over the Document Signer Public Key to the CA for certification
(iii) Keeps the Document Signer Private Key secret
(iv) Uses securely the Document Signer Private Key for signing the Document Security
Objects of the travel documents.
The CA creates the Document Signer Certificates for the Document Signer Public Keys that are
distributed to the Receiving Organizations and Organizations. It is assumed that the Personalisation
Agent ensures that the Document Security Object contains only the hash values of genuine user data
according to [R10].
6.5.2 Assumptions for Chip Authentication
A.Insp_Sys_CA
The Inspection System implements the Chip Authentication Mechanism. The Inspection System
verifies the authenticity of the MRD’s chip during inspection and establishes secure messaging with
keys established by the Chip Authentication Mechanism.
A.Signature_PKI
The issuing and receiving Organizations establish a public key infrastructure for passive
authentication i.e. digital signature creation and verification for the logical MRD. The issuing
Organization runs a Certification Authority (CA) which securely generates, stores and uses the
Country Signing CA Key pair. The CA keeps the Country Signing CA Private Key secret and is
recommended to distribute the Country Signing CA Public Key to ICAO, all receiving Organizations
maintaining its integrity. The Document Signer (i) generates the Document Signer Key Pair, (ii) hands
over the Document Signer Public Key to the CA for certification, (iii) keeps the Document Signer
Private Key secret and (iv) uses securely the Document Signer Private Key for signing the Document
Security Objects of the MRDs. The CA creates the Document Signer Certificates for the Document
Signer Public Keys that are distributed to the receiving Organizations.
6.5.3 Assumptions for Active Authentication
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
A.Insp_Sys_AA
The Inspection System implements the Active Authentication Mechanism. The Inspection System
verifies the authenticity of the MRD’s chip during inspection using the signature returned by the TOE
during Active Authentication.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
7 SECURITY OBJECTIVES
7.1 Security Objectives for the TOE
This section describes the security objectives for the TOE addressing the aspects of identified threats
to be countered by the TOE and organizational security policies to be met by the TOE. The OT are
taken from the PP EAC with PACE, which requires to include also some OT described in the PP PACE.
7.1.1 SO from PP PACE
OT.Data_Int
The TOE must ensure integrity of the User Data and the TSF-data stored on it by protecting these
data against unauthorised modification (physical manipulation and unauthorised modifying). The
TOE must ensure integrity of the User Data and the TSF-data during their exchange between the TOE
and the terminal connected (and represented by PACE authenticated BIS-PACE) after the PACE
Authentication.
OT.Data_Auth
The TOE must ensure authenticity of the User Data and the TSF-data stored on it by enabling
verification of their authenticity at the terminal-side.
The TOE must ensure authenticity of the User Data and the TSF-data during their exchange between
the TOE and the terminal connected (and represented by PACE authenticated BIS-PACE) after the
PACE Authentication. It shall happen by enabling such a verification at the terminal-side (at receiving
by the terminal) and by an active verification by the TOE itself (at receiving by the TOE).
OT.Data_Conf
The TOE must ensure confidentiality of the User Data and the TSF-data by granting read access only
to the PACE authenticated BIS-PACE connected.
The TOE must ensure confidentiality of the User Data and the TSF-data during their exchange
between the TOE and the terminal connected (and represented by PACE authenticated BIS-PACE)
after the PACE Authentication.
OT.Tracing
The TOE must prevent gathering TOE tracing data by means of unambiguous identifying the travel
document remotely through establishing or listening to a communication via the contactless/contact
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
interface of the TOE without knowledge of the correct values of shared passwords (PACE passwords)
in advance.
Application note:
Since the Standard Inspection Procedure does not support any unique-secret based authentication of
the travel document’s chip (no Chip Authentication), a security objective like OT.CA_Proof (proof of
travel document authenticity) cannot be achieved by the current TOE.
OT.Prot_Abuse-Func
The TOE must prevent that functions of the TOE, which may not be used in TOE operational phase,
can be abused in order:
(i) To manipulate or to disclose the User Data stored in the TOE
(ii) To manipulate or to disclose the TSF-data stored in the TOE
(iii) To manipulate (bypass, deactivate or modify) soft-coded security functionality of the
TOE.
OT.Prot_Inf_Leak
The TOE must provide protection against disclosure of confidential User Data or/and TSF-data stored
and/or processed by the travel document by:
- Measurement and analysis of the shape and amplitude of signals or the time between events
found by measuring signals on the electromagnetic field, power consumption, clock, or I/O
lines
- Forcing a malfunction of the TOE and/or
- A physical manipulation of the TOE.
Application note:
This objective pertains to measurements with subsequent complex signal processing due to normal
operation of the TOE or operations enforced by an attacker.
OT.Prot_Phys-Tamper
The TOE must provide protection of the confidentiality and integrity of the User Data, the TSF Data,
and the MRD's chip Embedded Software by means of:
- Measuring through galvanic contacts representing a direct physical probing on the chips
surface except on pads being bonded (using standard tools for measuring voltage and
current) or
- Measuring not using galvanic contacts, but other types of physical interaction between
electrical charges (using tools used in solid-state physics research and IC failure analysis)
- Manipulation of the hardware and its security features, as well as
- Controlled manipulation of memory contents (User Data, TSF Data)
With a prior
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
- Reverse-engineering to understand the design and its properties and functions.
OT.Prot_Malfunction
The TOE must ensure its correct operation. The TOE must prevent its operation outside the normal
operating conditions where reliability and secure operation hves not been proven or tested. This is to
prevent errors. The environmental conditions may include external energy (esp. electromagnetic)
fields, voltage (on any contacts), clock frequency, or temperature.
OT.Identification
The TOE must provide means to store Initialisation Identification and Pre-Personalization Data in its
nonvolatile memory. The Initialisation Identification Data must provide a unique identification of the
IC during the manufacturing and the card issuing life cycle phases of the travel document. The
storage of the PrePersonalization data includes writing of the Personalization Agent Key(s).
OT.AC_Pers
The TOE must ensure that the logical MRD data in EF.DG1 to EF.DG16, the Document security object
according to LDS [R2] and the TSF data can be written by authorized Personalization Agents only. The
logical MRD data in EF.DG1 to EF.DG16 and the TSF data may be written only during and cannot be
changed after its personalization.
Application note:
The OT.AC_Pers implies that the data of the LDS groups written during personalisation for travel
document holder (at least EF.DG1 and EF.DG6) can not be changed using write access after
personalisation.
7.1.2 SO for CA
OT.CA_Proof
The TOE must support the Inspection Systems to verify the identity and authenticity of the MRD’s
chip as issued by the identified issuing Organization by means of the Chip Authentication as defined
in [R38]. The authenticity proof provided by the MRD’s chip shall be protected against attacks with
high attack potential.
Application note
The objective implies the MRD’s to have (i) a unique identity as given by the MRD’s Document
Number, (ii) a secret to prove its identity by knowledge i.e. a private authentication key as TSF data.
The TOE shall protect this TSF data to prevent their misuse. The terminal shall have the reference
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
data to verify the authentication attempt of MRD’s chip i.e. a certificate for the Chip Authentication
Public Key that matches the Chip Authentication Private Key of the MRD’s chip. This certificate is
provided by (i) the Chip Authentication Public Key (EF.DG14) in the LDS [R2] and (ii) the hash value of
the Chip Authentication Public Key in the Document Security Object signed by the Document Signer.
OT.Data_Int_CA
The TOE must ensure the integrity of the logical MRD stored on the MRD's chip against physical
manipulation and unauthorized writing. The TOE must ensure the integrity of the logical MRD data
during their transmission to the General Inspection System after Chip Authentication.
7.1.3 SO for AA
OT.AA_Proof
The TOE must support the Inspection Systems to verify the identity and authenticity of MRD’s chip as
issued by the identified issuing Organization by means of the Active Authentication as defined in
[R2]. The authenticity proof through AA provided by MRD’s chip shall be protected against attacks
with high attack potential.
OT.Data_Int_AA
The TOE must ensure the integrity of the logical MRD stored on the MRD's chip against physical
manipulation and unauthorized writing. The TOE must ensure the integrity of the logical MRD data
during their transmission to the General Inspection System after Active Authentication.
7.1.4 SO for Note 6
OT.Secure_Load_ACode
The Loader of the Initial TOE shall check an evidence of authenticity and integrity of the loaded
Additional Code. The Loader enforces that only the allowed version of the Additional Code can be
loaded on the Initial TOE. The Loader shall forbid the loading of an Additional Code not intended to
be assembled with the Initial TOE.
During the Load Phase of an Additional Code, the TOE shall remain secure.
OT.Secure_AC_Activation
Activation of the Additional Code and update of the Identification Data shall be performed at the
same time in an Atomic way. All the operations needed for the code to be able to operate as in the
Final TOE shall be completed before activation.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
If the Atomic Activation is successful, then the resulting product is the Final TOE, otherwise (in case
of interruption or incident which prevents the forming of the Final TOE), the Initial TOE shall remain
in its initial state or fail secure.
OT.TOE_Identification
The Identification Data identifies the Initial TOE and Additional Code. The TOE provides means to
store Identification Data in its non-volatile memory and guarantees the integrity of these data. After
Atomic Activation of the Additional Code, the Identification Data of the Final TOE allows
identifications of Initial TOE and Additional Code. The user must be able to uniquely identify Initial
TOE and Addtitional Code(s) which are embedded in the Final TOE. TOE must support the Inspection
Systems to verify the authenticity.
7.2 Security objectives for the Operational Environment
7.2.1 OE from PP PACE
7.2.1.1 Document issuer and general responsible
The document Issuer as the general responsible for the global security policy related will implement
the following security objectives for the TOE environment.
OE.Legislative_Compliance
The document Issuer must issue the document and approve it using the terminals complying with all
applicable laws and regulations
7.2.1.2 Document issuer and CSCA document’s PKI (issuing) branch
OE.Pass_Auth_Sign
The travel document Issuer has to establish the necessary public key infrastructure as follows: the
CSCA acting on behalf and according to the policy of the travel document Issuer must (i) generate a
cryptographically secure CSCA Key Pair, (ii) ensure the secrecy of the CSCA Private Key and sign
Document Signer Certificates in a secure operational environment, and (iii) publish the Certificate of
the CSCA Public Key (CCSCA). Hereby authenticity and integrity of these certificates are being
maintained.
A Document Signer acting in accordance with the CSCA policy must:
(i) generate a cryptographically secure Document Signing Key Pair
(ii) ensure the secrecy of the Document Signer Private Key
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
(iii) hand over the Document Signer Public Key to the CSCA for certification
(iv) sign Document Security Objects of genuine travel documents in a secure operational
environment only. The digital signature in the Document Security Object relates to all hash
values for each data group in use according to [6].
The Personalisation Agent has to ensure that the Document Security Object contains only the hash
values of genuine user data according to [6]. The CSCA must issue its certificates exclusively to the
rightful Organizations (DS) and DSs must sign exclusively correct DocumentSecurity Objects to be
stored on travel document.
OE.Personalization
The travel document Issuer must ensure that the Personalisation Agents acting on his behalf:
(i) establish the correct identity of the travel document holder and create the biographical
data for the travel document
(ii) enrol the biometric reference data of the travel document holder
(iii) write a subset of these data on the physical Passport (optical personalisation) and store
them in the travel document (electronic personalisation) for the travel document holder as
defined in [R2]
(iv) write the document details data
(v) write the initial TSF data
(vi) sign the Document Security Object defined in [R2] (in the role of a DS).
OE.Terminal
The terminal operators must operate their terminals as follows:
1.) The related terminals (basic inspection systems, cf. above) are used by terminal operators
and by travel document holders as defined in [R2]
2.) The related terminals implement the terminal parts of the PACE protocol [R3], of the
Passive Authentication [R3](by verification of the signature of the Document Security Object)
and use them in this order. The PACE terminal uses randomly and (almost) uniformly selected
nonces, if required by the protocols (for generating ephemeral keys for Diffie-Hellmann)
3.) The related terminals need not to use any own credentials
4.) The related terminals securely store the Country Signing Public Key and the Document
Signer Public Key (in form of CCSCAand CDS) in order to enable and to perform Passive
Authentication of the travel document (determination of the authenticity of data groups
stored in the travel document, [R2])
5.) The related terminals and their environment must ensure confidentiality and integrity of
respective data handled by them (e.g. confidentiality of the PACE passwords, integrity of PKI
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
certificates, etc.), where it is necessary for a secure operation of the TOE according to the
current PP
OE.MRD_Holder
The travel document holder may reveal, if necessary, his or her verification values of the PACE
password to an authorized person or device who definitely act according to respective regulations
and are trustworthy.
7.2.2 OE for CA
OE.Auth_Key_MRD
The issuing Organization has to establish the necessary public key infrastructure in order to:
- (i) Generate the MRD's Chip Authentication Key Pair
- (ii) Sign and store the Chip Authentication Public Key in the Chip Authentication Public Key
data in EF.DG14
- (iii) Support inspection systems of receiving organizations to verify the authenticity of the
MRD's chip used for genuine MRD by certification of the Chip Authentication Public Key by
means of the Document Security Object.
OE.Exam_MRD_CA
Aditionally to the OE.Exam_MRD, the inspection systems perform the Chip Authentication protocol
to verify the Authenticity of the presented MRD’s chip.
OE.Prot_Logical_MRD_CA
Aditionally to the OE.Prot_Logical_MRD, the inspection system prevents eavesdropping to their
communication with the TOE before secure messaging is successfully established based on the Chip
Authentication Protocol.
Application note
The Inspection Systems follow the order (i) running the Basic Access Protection Protocol, (ii) reading
and verifying only those parts of the logical MRD that are necessary to know for the Chip
Authentication Mechanism (i.e. Document Security Object and Chip Authentication Public Key), (iii)
running the Chip Authentication Protocol, and (iv) reading and verifying the less-sensitive data of the
logical MRD after Chip Authentication. The supposed sequence has the advantage that the less-
sensitive data are protected by secure messaging with cryptographic keys based on the Chip
Authentication Protocol which quality is under control of the TOE. The inspection system will prevent
additionally eavesdropping to their communication with the TOE before secure messaging is
successfully established based on the Chip Authentication Protocol. Note that reading the less
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
sensitive data directly after Basic Access Protection Mechanism is allowed and is not assumed as
threat in this PP. But the TOE ensures that reading of sensitive data is possible after successful Chip
Authentication.
7.2.3 OE for AA
OE.Exam_MRD_AA
Aditionally to the OE.Exam_MRD, the inspection systems perform the Active Authentication protocol
to verify the Authenticity of the presented MRD’s chip.
OE.Prot_Logical_MRD_AA
Aditionally to the OE.Prot_Logical_MRD, the inspection system prevents eavesdropping to their
communication with the TOE before secure messaging is successfully established based on the Active
Authentication Protocol.
OE.Activ_Auth_Verif
In addition to the verification by passive authentication, the inspection systems may use the
verification by Active Authentication, which offers a stronger guaranty of the authenticity of the
MRD.
OE.Activ_Auth_Sign
The issuing Organization has to establish the necessary public key infrastructure in order to (i)
generate the MRD’s Active Authentication Key Pair, (ii) ensure the secrecy of the MRD’s Active
Authentication Private Key, sign and store the Active Authentication Public Key in the Active
Authentication Public Key data in EF.DG13 and (iii) support inspection systems of receiving
Organizations to verify the authenticity of the MRD’s chip used for genuine MRD by certification of
the Active Authentication Public Key by means of the Document Security Object.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
8 EXTENDED REQUIREMENTS
8.1 Extended family FAU_SAS - Audit data storage
8.1.1 Extended components FAU_SAS.1
Description: see [R11].
FAU_SAS.1 Audit storage
FAU_SAS.1.1 The TSF shall provide [assignment: authorized users] with the capability to store
[assignment: list of audit information] in the audit records.
Dependencies: No dependencies.
Rationale: see [R11]
8.2 Extended family FCS_RND - Generation of random numbers
8.2.1 Extended component FCS_RND.1
Description: see [R11]
FCS_RND.1 Quality metric for random numbers
FCS_RND.1.1 The TSF shall provide a mechanism to generate random numbers that meet
[assignment: a defined quality metric].
Dependencies: No dependencies.
Rationale: See [R11]
8.3 Extended family FIA_API – Authentication proof of identity
8.3.1 Extended component FIA_API.1
Description: see [R12]
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_API.1 Quality metric for random numbers
FIA_API.1.1 The TSF shall provide a [assignment: authentication mechanism] to prove the identity of
the [assignment: authorized user or role].
Dependencies: No dependencies.
Rationale: See [R12]
8.4 Extended family FMT_LIM - Limited capabilities and availability
8.4.1 Extended component FMT_LIM.1
Description: see [R11]
FMT_LIM.1 Limited capabilities
FMT_LIM.1.1 The TSF shall be designed in a manner that limits their capabilities so that in
conjunction with "Limited availability (FMT_LIM.2)" the following policy is enforced [assignment:
Limited capability and availability policy].
Dependencies: (FMT_LIM.2)
Rationale: See [R11]
8.4.2 Extended component FMT_LIM.2
Description: See [R11]
FMT_LIM.2 Limited availability
FMT_LIM.2.1 The TSF shall be designed in a manner that limits their availability so that in
conjunction with "Limited capabilities (FMT_LIM.1)" the following policy is enforced [assignment:
Limited capability and availability policy].
Dependencies: (FMT_LIM.1)
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Rationale: See [R11]
8.5 Extended family FPT_EMS - TOE Emanation
8.5.1 Extended component FPT_EMS.1
Description: see [R11]
FPT_EMS.1 TOE Emanation
FPT_EMS.1.1 The TOE shall not emit [assignment: types of emissions] in excess of [assignment:
specified limits] enabling access to [assignment: list of types of TSF data] and [assignment: list of
types of user data].
FPT_EMS.1.2 The TSF shall ensure [assignment: type of users] are unable to use the following
interface [assignment: type of connection] to gain access to [assignment: list of types of TSF data]
and [assignment: list of types of user data].
Dependencies: No dependencies.
Rationale: See [R11]
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
9 SECURITY REQUIREMENTS
9.1 Security Functional Requirements
This chapter presents the Security Functional Requirements to take into account within the TOE
configuration presented in this security target. It is composed of the following elements:
- Global SFR that are applicable to all the passports configuration
- MP SFR for covering the phase Manufacturing and Personalization described in the Passport
Protection Profile and also the coverage of Additional Code.
- Active Authentication SFR that cover the Active Authentication Protocol
- BAP SFR that cover the Basic Access Protection
- CA SFR that cover the Chip Authentication Protocol
- PACE SFR that cover the Password Authenticated Connection Establishment protocol
- PACE CAM that cover the Password Authenticated Connection Establishment with Chip
Authentication Mapping protocol
9.1.1 Global SFR
This chapter covers the common SFR that are shared between the different applications that are
embedded on the product.
FCS_CKM.4/Global Cryptographic key destruction
FCS_CKM.4.1/Global The TSF shall destroy cryptographic keys in accordance with a specified
cryptographic key destruction method zeroisation that meets the following: none.
FCS_RND.1/Global Quality metric for random numbers
FCS_RND.1.1/Global The TSF shall provide a mechanism to generate random numbers that meet
1. The requirement to provide an entropy of at least 7.976 bits in each byte, following AIS 31 [R36]
and
2. The requirement of RGS_B1 for random number generation.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FMT_LIM.1/Global Limited capabilities
FMT_LIM.1.1/Global The TSF shall be designed in a manner that limits their capabilities so that in
conjunction with "Limited availability (FMT_LIM.2)" the following policy is enforced:
Deploying Test Features after TOE Delivery does not allow
1. User Data to be manipulated
2. TSF data to be disclosed or manipulated
3. Software to be reconstructed
4. Substantial information about construction of TSF to be gathered which may enable
other attacks
FMT_LIM.2/Global Limited availability
FMT_LIM.2.1/Global The TSF shall be designed in a manner that limits their availability so that in
conjunction with "Limited capabilities (FMT_LIM.1)" the following policy is enforced:
Deploying Test Features after TOE Delivery does not allow
1. User Data to be manipulated
2. TSF data to be disclosed or manipulated
3. Software to be reconstructed
4. Substantial information about construction of TSF to be gathered which may enable
other attacks
FPT_EMS.1/Global TOE Emanation
FPT_EMS.1.1/Global The TOE shall not emit power variations, timing variations during command
execution in excess of non useful information enabling access to
1. EF.COM, EF.SOD and EF.DG1 to EF.DG16
FPT_EMS.1.2/Global The TSF shall ensure any unauthorized users are unable to use the following
interface smart card circuit contacts to gain access to
1. EF.COM, EF.SOD and EF.DG1 to EF.DG16
FPT_FLS.1/Global Failure with preservation of secure state
FPT_FLS.1.1/Global The TSF shall preserve a secure state when the following types of failures occur:
1. Exposure to out-of-range operating conditions where therefore a malfunction could occur
2. Failure detected by TSF according to FPT_TST.1.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FPT_TST.1/Global TSF testing
FPT_TST.1.1/Global The TSF shall run a suite of self tests to demonstrate the correct operation of the
TSF, at the conditions:
- At reset
- Before any cryptographic operation
- When accessing a DG or any EF
- Prior to any use of TSF data
- Before execution of any command
FPT_TST.1.2/Global The TSF shall provide authorised users with the capability to verify the integrity
of TSF data.
FPT_TST.1.3/Global The TSF shall provide authorised users with the capability to verify the integrity
of stored TSF executable code.
FPT_PHP.3/Global Resistance to physical attack
FPT_PHP.3.1/Global The TSF shall resist physical manipulation and physical probing to the TSF by
responding automatically such that the SFRs are always enforced.
9.1.2 Product configuration SFR
This chapter covers the Manufacturing and Personalization SFR. It also includes additional SFR for the
compliance to Note 6.
9.1.2.1 SFR for additional code
FAU_STG.2/MP_Add_code Guarantees of audit data availability
FAU_STG.2.1/MP_Add_code The TSF shall protect the stored audit records in the audit trail from
unauthorized deletion.
FAU_STG.2.2/MP_Add_code The TSF shall be able to prevent unauthorized modifications to the
stored audit records in the audit trail.
FAU_STG.2.3/MP_Add_code The TSF shall ensure that Additional code identification stored audit
records will be maintained when the following conditions occur: failure and attack.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Application Note:
Additional code code is loaded with its integrity information. This integrity information is verified by
the TOE after the loading, and before the writing of the identification information by calculating the
signature and comparing to the expected value. The signature is protected in integrity through the
TOE life cycle, at each power on, the card verifies the integrity of this signature.
FCS_CKM.1/MP_Add_code Cryptographic key generation
FCS_CKM.1.1/MP_Add_code The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
Calculation of LSK_LOAD, from initial LSK and derivation data
entered - AES 128 ECB
128 None
FCS_COP.1/MP_ENC_Add_code Cryptographic operation
FCS_COP.1.1/MP_ENC_Add_code The TSF shall perform [cryptographic operation] in accordance
with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Encryption of the additional code (ciphered with
LSK_LOAD) and signature verification
AES 128 [R34]
FCS_COP.1/MP_MAC_Add_code Cryptographic operation
FCS_COP.1.1/MP_MAC_Add_code The TSF shall perform [cryptographic operation] in accordance
with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Cryptographic operation Algo
Key length
(bits)
Standard
Secure Messaging MAC
3DES Retail MAC 112 [R34]
AES CMAC 128, 192 or 256 [R34]
FDP_UIT.1/MP_Add_code Data exchange integrity
FDP_UIT.1.1/MP_Add_code The TSF shall enforce the Prepersonalization access control SFP to
receive user data in a manner protected from modification errors.
FDP_UIT.1.2/MP_Add_code [Editorially Refined] The TSF shall be able to determine on receipt of
user data, whether modification of some of the pieces of the application sent by the TOE developer
has occurred.
Application Note
Modification errors should be understood as modification, substitution, unrecoverable ordering
change of data and any other integrity error that may cause the additional code to be installed on the
card to be different from the one sent by the TOE Developer.
This SFR control integrity of data import in phase 5, including the additional code but not only.
FMT_MTD.1/MP_Add_code Management of TSF data
FMT_MTD.1.1/MP_Add_code The TSF shall restrict the ability to [selection the [list of TSF data] to
[authorized identified roles]:
List of TSF data Authorised role
Activate Additional code TOE developer
Application note
The Activation of the additional code modify the TOE. This additional code is ciphered with the
LSK_LOAD (LSK and Derivation Data) and activated after the authentication of the TOE developer.
FMT_MTD.1/MP_KEY_READ_Add_code Management of TSF data
FMT_MTD.1.1/MP_KEY_READ_Add_code The TSF shall restrict the ability to read the [data] to
[authorized identified roles]:
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
TSF Data Authorized Identified roles
LSK None
FMT_SMR.1/MP_Add_code Security roles
FMT_SMR.1.1/MP_Add_code The TSF shall maintain the roles
1. TOE developper
FMT_SMR.1.2/MP_Add_code The TSF shall be able to associate users with roles.
FPT_EMS.1/MP_Add_code TOE Emanation
FPT_EMS.1.1/MP_Add_code The TOE shall not emit power variations, timing variations during
command execution in excess of non useful information enabling access to
1. LSK
FPT_EMS.1.2/MP_Add_code The TSF shall ensure any unauthorized users are unable to use the
following interface smart card circuit contacts to gain access to
1. LSK
FTP_ITC.1/MP_Add_code Inter-TSF trusted channel
FTP_ITC.1.1/MP_Add_code The TSF shall provide a communication channel between itself and
another trusted IT product that is logically distinct from other communication channels and provides
assured identification of its end points and protection of the channel data from modification or
disclosure.
FTP_ITC.1.2/MP_Add_code [Editorially Refined] The TSF shall permit the TOE Developer and
Prepersonalizer to initiate communication via the trusted channel.
FTP_ITC.1.3/MP_Add_code The TSF shall initiate communication via the trusted channel for:
1. Additional code loading
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
9.1.2.2 Manufacturing and Personalization
FCS_CKM.1/MP Cryptographic key generation
FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified cryptographic
key generation algorithm [cryptographic key generation algorithm] and specified cryptographic key
sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm
Key length
(bits)
Standards
MSK derivation from initial MSK loaded in phase 1 using SHA 256 256 None
FCS_COP.1/MP_ENC_3DES Cryptographic operation
FCS_COP.1.1/MP_ENC_3DES The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Secure Messaging – encryption and
decryption
3DES in CBC mode 112 [R31]
FCS_COP.1/MP_ENC_AES Cryptographic operation
FCS_COP.1.1/MP_ENC_AES The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Secure Messaging – encryption and
decryption
AES in CBC mode 128, 192 and 256 [R34]
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FCS_COP.1/MP_MAC_3DES Cryptographic operation
FCS_COP.1.1/MP_MAC_3DES The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Secure Messaging – MAC 3DES RMAC 112 [R31]
FCS_COP.1/MP_MAC_AES Cryptographic operation
FCS_COP.1.1/MP_MAC_AES The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Secure Messaging MAC AES 128, 192 and 256 [R34]
FCS_COP.1/MP_AUTH_3DES Cryptographic operation
FCS_COP.1.1/MP_AUTH_3DES The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Card Manufacturer Authentication (MSK) 3DES 112 [R31]
FCS_COP.1/MP_AUTH_AES Cryptographic operation
FCS_COP.1.1/MP_AUTH_AES The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Cryptographic operation Algo
Key length
(bits)
Standard
Card Manufacturer Authentication (MSK) AES 128, 192 and 256 [R34]
FCS_COP.1/MP_SHA Cryptographic operation
FCS_COP.1.1/MP_SHA The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Hashing SHA256 None [R26]
FDP_ACC.2/MP Complete access control
FDP_ACC.2.1/MP The TSF shall enforce the Prepersonalization Access Control on all subjects and all
objects and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/MP The TSF shall ensure that all operations between any subject controlled by the TSF
and any object controlled by the TSF are covered by an access control SFP.
Application Note
This SFR enforces access control over all the operation performed in phase 5, including additional
code loading but not only.
FDP_ACF.1/MP Security attribute based access control
FDP_ACF.1.1/MP The TSF shall enforce the Prepersonalization Access Control to objects based on
the following Prepersonalizer Authentication (AS_AUTH_MSK_STATUS).
FDP_ACF.1.2/MP The TSF shall enforce the following rules to determine if an operation among
controlled subjects and controlled objects is allowed: AS_AUTH_MSK_STATUS=TRUE (EXTERNAL
AUTHENTICATE).
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FDP_ACF.1.3/MP The TSF shall explicitly authorise access of subjects to objects based on the
following additional rules: none.
FDP_ACF.1.4/MP The TSF shall explicitly deny access of subjects to objects based on the following
additional rules: none.
Application Note
This SFR enforces access control over all the operation in phase 5, including additional code loading
but not only.
FDP_ITC.1/MP Import of user data without security attributes
FDP_ITC.1.1/MP The TSF shall enforce the Prepersonalization access control when importing user
data, controlled under the SFP, from outside of the TOE.
FDP_ITC.1.2/MP The TSF shall ignore any security attributes associated with the user data when
imported from outside the TOE.
FDP_ITC.1.3/MP The TSF shall enforce the following rules when importing user data controlled under
the SFP from outside the TOE: none.
Application Note
This SFR control import of data in phase 5, including the additional code but not only.
This SFR ensures also the MSK diviersification, which is performs once, at first command, without any
security requirements preliminary to this action.
FDP_UCT.1/MP Basic data exchange confidentiality
FDP_UCT.1.1/MP The TSF shall enforce the Prepersonalization access control to receive user data in
a manner protected from unauthorised disclosure.
Application note
For the Additional code loading access control, the LSK_LOAD is used to cipher the data transmitted.
This SFR control confidentiality of data import in phase 5, including the additional code but not only.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FDP_UIT.1/MP Data exchange integrity
FDP_UIT.1.1/MP The TSF shall enforce the Prepersonalization Access Control SFP to receive user
data in a manner protected from modification errors
FDP_UIT.1.2/MP [Editorially refined] The TSF shall be able to determine on receipt of user data,
whether modification of some pieces of the application sent by the Prepersonalizer has occurred
FIA_AFL.1/MP Authentication failure handling
FIA_AFL.1.1/MP The TSF shall detect when 3 unsuccessful authentication attempts occur related to
authentication of
1. Prepersonalizer
FIA_AFL.1.2/MP When the defined number of unsuccessful authentication attempts has been met,
the TSF shall forbid any authentication attempt as Personalizer.
FIA_UAU.1/MP Timing of authentication
FIA_UAU.1.1/MP The TSF shall allow GET DATA, SELECT FILE on behalf of the user to be performed
before the user is authenticated.
FIA_UAU.1.2/MP The TSF shall require each user to be successfully authenticated before allowing
any other TSF-mediated actions on behalf of that user.
FIA_UID.1/MP Timing of identification
FIA_UID.1.1/MP The TSF shall allow GET DATA, SELECT FILE on behalf of the user to be performed
before the user is identified.
FIA_UID.1.2/MP The TSF shall require each user to be successfully identified before allowing any
other TSF-mediated actions on behalf of that user.
FIA_UAU.4/MP_3DES Single-use authentication mechanisms
FIA_UAU.4.1/MP_3DES The TSF shall prevent reuse of authentication data related to
1. Authentication Mechanisms based on 3DES
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_UAU.4/MP_AES Single-use authentication mechanisms
FIA_UAU.4.1/MP_AES The TSF shall prevent reuse of authentication data related to
1. Authentication Mechanisms based on AES
FIA_UAU.5/MP_3DES Multiple authentication mechanisms
FIA_UAU.5.1/MP_3DES The TSF shall provide
1. Symmetric Authentication Mechanism based on 3DES
to support user authentication.
FIA_UAU.5.2/MP_3DES The TSF shall authenticate any user's claimed identity according to the
1. The TOE accepts the authentication attempt as Personalization Agent by the Symmetric
Authentication Mechanism with the Personalization Agent Key
FIA_UAU.5/MP_AES Multiple authentication mechanisms
FIA_UAU.5.1/MP_AES The TSF shall provide
1. Symmetric Authentication Mechanism based on AES
to support user authentication.
FIA_UAU.5.2/MP_AES The TSF shall authenticate any user's claimed identity according to the
1. The TOE accepts the authentication attempt as Personalization Agent by the Symmetric
Authentication Mechanism with Personalization Agent Key
FMT_MTD.1/MP Management of TSF data
FMT_MTD.1.1/MP The TSF shall restrict the ability to switch the TOE life cycle from phase 5 to
phase 6 to the Prepersonalizer.
FTP_ITC.1/MP Inter-TSF trusted channel
FTP_ITC.1.1/MP The TSF shall provide a communication channel between itself and another trusted
IT product that is logically distinct from other communication channels and provides assured
identification of its end points and protection of the channel data from modification or disclosure.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FTP_ITC.1.2/MP [Editorially Refined] The TSF shall permit the Prepersonalizer to initiate
communication via the trusted channel.
FTP_ITC.1.3/MP The TSF shall initiate communication via the trusted channel for:
1. Personalization Agent key storage
2. Life cycle transition from Prepersonalization to Personalization phase
FMT_MTD.1/MP_INI_ENA Management of TSF data
FMT_MTD.1.1/MP_INI_ENA The TSF shall restrict the ability to write the Initialization Data and
Prepersonalization Data to the Prepersonalizer.
FMT_MTD.1/MP_INI_DIS Management of TSF data
FMT_MTD.1.1/MP_INI_DIS The TSF shall restrict the ability to disable read access for users to the
Initialization Data to the Personalization Agent.
FMT_MTD.1/MP_KEY_READ Management of TSF data
FMT_MTD.1.1/MP_KEY_READ The TSF shall restrict the ability to read the [data] to [authorized
identified roles]:
TSF Data Authorized Identified roles
MSK None
Personalization Agent Keys None
FMT_MTD.1/MP_KEY_WRITE Management of TSF data
FMT_MTD.1.1/MP_KEY_WRITE The TSF shall restrict the ability to write the [data] to [authorized
identified roles]:
TSF Data Authorized Identified roles
MSK IC manufacturer (created by the developer)
Personalization Agent Keys None
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FAU_SAS.1/MP Audit storage
FAU_SAS.1.1/MP The TSF shall provide the Manufacturer with the capability to store the IC
Identification Data in the audit records.
FMT_SMF.1/MP Specification of Management Functions
FMT_SMF.1.1/MP The TSF shall be capable of performing the following management functions:
1. Initialization
2. Pre-personalization
3. Personalization
FMT_SMR.1/MP Security roles
FMT_SMR.1.1/MP The TSF shall maintain the roles
1. Manufacturer
FMT_SMR.1.2/MP The TSF shall be able to associate users with roles.
FPT_EMS.1/MP TOE Emanation
FPT_EMS.1.1/MP The TOE shall not emit power variations, timing variations during command
execution in excess of non useful information enabling access to
1. Prepersonalizer Key
2. Personalization Agent Key
3. MSK
FPT_EMS.1.2/MP The TSF shall ensure any unauthorized users are unable to use the following
interface smart card circuit contacts to gain access to
1. Prepersonalizer Key
2. Personalization Agent Key
3. MSK
9.1.3 Active Authentication SFR
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FCS_COP.1/AA_DSA Cryptographic operation
FCS_COP.1.1/AA_DSA The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Operation Algorithm
Key length
(bits)
Standard
Digital Signature
Creation
RSA signature (CRT or SFM) with
SHA1, 224, 256, 384, 512
1024 to 4096 with a step
of 256 bits
[R24]
FCS_COP.1/AA_ECDSA Cryptographic operation
FCS_COP.1.1/AA_ECDSA The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Operation Algo
Key length
(bits)
Standard
Digital Signature
Creation
ECDSA with SHA1, 224, 256, 384,
512
192 to 521 over prime
field curves
[R24] [R25]
[R26] [R27]
FDP_DAU.1/AA Basic Data Authentication
FDP_DAU.1.1/AA The TSF shall provide a capability to generate evidence that can be used as a
guarantee of the validity of the TOE itself.
FDP_DAU.1.2/AA The TSF shall provide any users with the ability to verify evidence of the validity of
the indicated information.
Refinement:
Evidence generation and ability of verfying it, constitute the Active Authentication protocol.
FDP_ITC.1/AA Import of user data without security attributes
FDP_ITC.1.1/AA The TSF shall enforce the Active Authentication Access Control SFP when importing
user data, controlled under the SFP, from outside of the TOE.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FDP_ITC.1.2/AA The TSF shall ignore any security attributes associated with the user data when
imported from outside the TOE.
FDP_ITC.1.3/AA The TSF shall enforce the following rules when importing user data controlled under
the SFP from outside the TOE: none.
FMT_MTD.1/AA_KEY_READ Management of TSF data
FMT_MTD.1.1/AA_KEY_READ The TSF shall restrict the ability to read the AAK to none.
FPT_EMS.1/AA TOE Emanation
FPT_EMS.1.1/AA The TOE shall not emit power variations, timing variations during command
execution in excess of non useful information enabling access to
1. Active Authentication: Private Key (AAK)
FPT_EMS.1.2/AA The TSF shall ensure any unauthorized users are unable to use the following
interface smart card circuit contacts to gain access to
1. Active Authentication: Private Key (AAK)
FMT_MOF.1/AA Management of security functions behaviour
FMT_MOF.1.1/AA The TSF shall restrict the ability to disable and enable the functions TSF Active
Authentication to Personalization Agent.
FMT_MTD.1/AA_KEY_WRITE Management of TSF data
FMT_MTD.1.1/AA_KEY_WRITE The TSF shall restrict the ability to write the AAK to Personalization
Agent.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FCS_CKM.1/BAP Cryptographic key generation
FCS_CKM.1.1/BAP The TSF shall generate cryptographic keys in accordance with a specified
cryptographic key generation algorithm [cryptographic key generation algorithm] and specified
cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm
Key length
(bits)
Standards
Document Basic Access Key Derivation Algorithm - AES 128, 192 and 256 [R7]
FCS_COP.1/BAP Cryptographic operation
FCS_COP.1.1/BAP The TSF shall perform [cryptographic operation] in accordance with a specified
cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes [cryptographic key
sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Encryption and decryption AES 128, 192 and 256 [R34]
FCS_COP.1/BAP-SM Cryptographic operation
FCS_COP.1.1/BAP-SM The TSF shall perform [cryptographic operation] in accordance with a
specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes
[cryptographic key sizes] that meet the following [standard]:
Cryptographic operation Algo
Key length
(bits)
Standard
Secure messaging – message authentication code
AES in CBC
mode
128, 192 and
256
[R34]
9.1.4 Chip Authentication SFR
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_API.1/CA Authentication Proof of Identity
FIA_API.1.1/CA The TSF shall provide a Chip Authentication protocol according to [R38] to prove the
identity of the TOE.
FCS_CKM.1/CA_DH_SM_3DES Cryptographic key generation
FCS_CKM.1.1/CA_DH_SM_3DES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
Algorithm based on the Key Diffie-Hellman key derivation
protocol compliant to PKCS#3
112 [R2]
FCS_CKM.1/CA_DH_SM_AES Cryptographic key generation
FCS_CKM.1.1/CA_DH_SM_AES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
Algorithm based on the Key Diffie-Hellman key derivation
protocol compliant to PKCS#3
128, 192, 256 [R2]
FCS_CKM.1/CA_ECDH_SM_3DES Cryptographic key generation
FCS_CKM.1.1/CA_ECDH_SM_3DES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
Algorithm based on ECDH key derivation protocol compliant to
ISO 15946
112 [R2]
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FCS_CKM.1/CA_ECDH_SM_AES Cryptographic key generation
FCS_CKM.1.1/CA_ECDH_SM_AES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
Algorithm based on ECDH key derivation protocol compliant to
ISO 15946
128, 192, 256 [R2]
FCS_COP.1/CA_SHA_SM_3DES Cryptographic key generation
FCS_COP.1.1/CA_SHA_SM_3DES The TSF shall perform hashing in accordance with a specified
cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes [key length] that
meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
SHA1 None [R26]
FCS_COP.1/CA_SHA_SM_AES Cryptographic key generation
FCS_COP.1.1/CA_SHA_SM_AES The TSF shall perform hashing in accordance with a specified
cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes [key length] that
meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
SHA1 and SHA256 None [R26]
FCS_COP.1/CA_SYM_SM_3DES Cryptographic key generation
FCS_COP.1.1/CA_SYM_SM_3DES The TSF shall perform SM encryption and decryption in
accordance with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic
key sizes [key length] that meet the following [standard]:
Cryptographic algorithm Key length Standards
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
(bits)
3DES CBC mode 112 [R26]
FCS_COP.1/CA_SYM_SM_AES Cryptographic key generation
FCS_COP.1.1/CA_SYM_SM_AES The TSF shall perform SM encryption and decryption in accordance
with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic key sizes [key
length] that meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
AES 128, 192 and 256 [R26]
FCS_COP.1/CA_MAC_SM_3DES Cryptographic key generation
FCS_COP.1.1/CA_MAC_SM_3DES The TSF shall perform SM message authentication code in
accordance with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic
key sizes [key length] that meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
3DES Retail MAC 112 [R38]
FCS_COP.1/CA_MAC_SM_AES Cryptographic key generation
FCS_COP.1.1/CA_MAC_SM_AES The TSF shall perform SM message authentication code in
accordance with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic
key sizes [key length] that meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
AES CMAC 128, 192 and 256 [R38]
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FDP_ITC.1/CA Import of user data without security attributes
FDP_ITC.1.1/CA The TSF shall enforce the Chip Authentication Access Control SFP when importing
user data, controlled under the SFP, from outside of the TOE.
FDP_ITC.1.2/CA The TSF shall ignore any security attributes associated with the user data when
imported from outside the TOE.
FDP_ITC.1.3/CA The TSF shall enforce the following rules when importing user data controlled under
the SFP from outside the TOE: none.
FIA_UAU.1/CA Timing of authentication
FIA_UAU.1.1/CA The TSF shall allow:
1. To establish the communication channel
2. To read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS
3. To identify themselves by selection of the authentication key
4. To carry out the Chip Authentication Protocol
on behalf of the user to be performed before the user is authenticated.
FIA_UAU.1.2/CA The TSF shall require each user to be successfully authenticated before allowing any
other TSF-mediated actions on behalf of that user.
FIA_UAU.5/CA_3DES Multiple authentication mechanisms
FIA_UAU.5.1/CA_3DES The TSF shall provide
1. Secure Messaging in MAC-ENC mode
2. Symmetric Authentication Mechanism based on 3DES
to support user authentication.
FIA_UAU.5.2/CA_3DES The TSF shall authenticate any user's claimed identity according to the
1. After run of the Chip Authentication Protocol the TOE accepts only received commands with
correct message authentication code sent by means of secure messaging with key agreed with the
terminal by means of the Chip Authentication Mechanism
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_UAU.5/CA_AES Multiple authentication mechanisms
FIA_UAU.5.1/CA_AES The TSF shall provide
1. Secure Messaging in MAC-ENC mode
2. Symmetric Authentication Mechanism based on AES
to support user authentication.
FIA_UAU.5.2/CA_AES The TSF shall authenticate any user's claimed identity according to the
1. After run of the Chip Authentication Protocol the TOE accepts only received commands with
correct message authentication code sent by means of secure messaging with key agreed with the
terminal by means of the Chip Authentication Mechanism
FIA_UAU.6/CA Re-authenticating
FIA_UAU.6.1/CA The TSF shall re-authenticate the user under the conditions each command sent to
the TOE after successful run of the CA shall be verified as being sent by the inspection system
FIA_UID.1/CA Timing of identification
FIA_UID.1.1/CA The TSF shall allow
1. To establish the communication channel
2. To read the Initialization Data if it is not disbled by TSF according to FMT_MTD.1/INI_DIS
3. To carry out th Chip Authentication Protocol
on behalf of the user to be performed before the user is identified.
FIA_UID.1.2/CA The TSF shall require each user to be successfully identified before allowing any
other TSF-mediated actions on behalf of that user.
FPT_EMS.1/CA TOE Emanation
FPT_EMS.1.1/CA The TOE shall not emit power variations, timing variations during command
execution in excess of non useful information enabling access to
1. Chip Authentication: Session Keys, Private Key (CAK)
FPT_EMS.1.2/CA The TSF shall ensure any unauthorized users are unable to use the following
interface smart card circuit contacts to gain access to
1. Active Authentication: Session Keys, Private Key (CAK)
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FPT_TST.1/CA TSF testing
FPT_TST.1.1/CA The TSF shall run a suite of self tests to demonstrate the correct operation of the
TSF, at the conditions:
- When performing the Chip Authentication
FPT_TST.1.2/CA The TSF shall provide authorised users with the capability to verify the integrity of
TSF data.
FPT_TST.1.3/CA The TSF shall provide authorised users with the capability to verify the integrity of
stored TSF executable code.
FMT_MTD.1/CA_KEY_WRITE Management of TSF data
FMT_MTD.1.1/CA_KEY_WRITE The TSF shall restrict the ability to write the CAK to Personalization
Agent.
FMT_MTD.1/CA_KEY_READ Management of TSF data
FMT_MTD.1.1/CA_KEY_READ The TSF shall restrict the ability to read the CAK to none.
FDP_UCT.1/CA Basic data exchange confidentiality
FDP_UCT.1.1/CA [Editorially Refined] The TSF shall enforce the Access Control SFP to transmit and
receive user data in a manner protected from unauthorised disclosure after Chip Authentication
protocol.
FDP_UIT.1/CA Data exchange integrity
FDP_UIT.1.1/CA [Editorially Refined] The TSF shall enforce the Access Control SFP to transmit and
receive user data in a manner protected from modification, deletion, insertion and replay errors
after Chip Authentication protocol
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FDP_UIT.1.2/CA [Editorially Refined] The TSF shall be able to determine on receipt of user data,
whether modification, deletion, insertion and replay has occurred after Chip Authentication
protocol
9.1.5 PACE SFR
FCS_CKM.1/ECDH_PACE_3DES Cryptographic key generation
FCS_CKM.1.1/ECDH_PACE_3DES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
DH key derivation protocol compliant to PKCS#3 3DES 2 keys [R2]
FCS_CKM.1/ECDH_PACE_AES Cryptographic key generation
FCS_CKM.1.1/ECDH_PACE_AES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
DH key derivation protocol compliant to ISO 15946 128, 192 & 256 [R2]
FCS_CKM.1/DH_PACE_3DES Cryptographic key generation
FCS_CKM.1.1/DH_PACE_3DES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
DH key derivation protocol compliant to PKCS#3 3DES 2 keys [R2]
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FCS_CKM.1/DH_PACE_AES Cryptographic key generation
FCS_CKM.1.1/DH_PACE_AES The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm [cryptographic key generation algorithm] and
specified cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic key generation algorithm Key length (bits) Standards
DH key derivation protocol compliant to ISO 15946 128, 192 & 256 [R2]
FCS_COP.1/PACE_ENC_AES Cryptographic key generation
FCS_COP.1.1/PACE_ENC_AES The TSF shall perform Secure Messaging - encryption and decryption
in accordance with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic
key sizes [key length] that meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
AES in CBC mode 128, 192 and 256 [R34]
FCS_COP.1/PACE_ENC_3DES Cryptographic key generation
FCS_COP.1.1/PACE_ENC_3DES The TSF shall perform Secure Messaging - encryption and decryption
in accordance with a specified cryptographic algorithm [cryptographic algorithm] and cryptographic
key sizes [key length] that meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
3DES in CBC mode 112 [R31]
FCS_COP.1/PACE_MAC_AES Cryptographic key generation
FCS_COP.1.1/PACE_MAC_AES The TSF shall perform Secure Messaging - Message Authentication
Code in accordance with a specified cryptographic algorithm [cryptographic algorithm] and
cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
CMAC AES 128, 192 and 256 [R34]
FCS_COP.1/PACE_MAC_3DES Cryptographic key generation
FCS_COP.1.1/PACE_MAC_3DES The TSF shall perform Secure Messaging - Message Authentication
Code in accordance with a specified cryptographic algorithm [cryptographic algorithm] and
cryptographic key sizes [key length] that meet the following [standard]:
Cryptographic algorithm
Key length
(bits)
Standards
Retail MAC with 3DES 112 [R31]
FDP_ACC.1/TRM Complete access control
FDP_ACC.1.1/TRM The TSF shall enforce the Access Control SFP on terminals gaining access to the
User Data and data stored in EF.SOD of the logical travel document
FDP_ACF.1/TRM Security attribute based access control
FDP_ACF.1.1/TRM The TSF shall enforce the Access Control SFP to objects based on the following
1. Subjects:
a. Terminal
b. BIS-PACE
2. Objects:
a. Data in EF.DG1 to EF.DG6 and EF.DG9 to EF.DG16 of the logical MRD
b. Data in EF.DG7 of the logical MRD
c. Data in EF.DG8 of the logical MRD
d. All TOE intrinsic secret cryptographic keys stored in the travel document
3. Security attributes:
a. Authentication status of terminals
FDP_ACF.1.2/TRM The TSF shall enforce the following rules to determine if an operation among
controlled subjects and controlled objects is allowed:
1. A BIS-PACE is allowed to read data objects from FDP.ACF.1.1/TRM according to [R2] after a
successful PACE authentication a required by FIA_UAU.1/PACE
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FDP_ACF.1.3/TRM The TSF shall explicitly authorise access of subjects to objects based on the
following additional rules: none.
FDP_ACF.1.4/TRM The TSF shall explicitly deny access of subjects to objects based on the following
additional rules:
1. Any terminal being not authenticated as PACE authenticated BIS-PACE is not allowed to read, to
write, to modify, to use any User Data stored on the travel document
2. Terminals not using secure messaging are not allowed to read, to write, to modify, to use any
data stored on the travel document
FDP_RIP.1 Subset residual information protection
FDP_RIP.1.1 The TSF shall ensure that any previous information content of a resource is made
unavailable upon the allocation of the ressource to and deallocation of the resource from the
following objects:
1. Session Keys (immediately after closing related communication session)
2. The ephemeral private key ephem-SKSIC- PACE (by having generated a DH shared secret)
FDP_UCT.1/TRM Basic data exchange confidentiality - MRD
FDP_UCT.1.1/TRM The TSF shall enforce the Access Control SFP to be able to transmit and receive
user data in a manner protected from unauthorised disclosure.
FDP_UIT.1/TRM Data exchange integrity
FDP_UIT.1.1/TRM The TSF shall enforce the Access Control SFP to be able to transmit and receive
user data in a manner protected from modification, deletion, insertion and replay errors
FDP_UIT.1.2/TRM The TSF shall be able to determine on receipt of user data, whether modification,
deletion, insertion and replay has occurred
FIA_AFL.1/PACE Authentication failure handling
FIA_AFL.1.1/PACE The TSF shall detect when an administrator configurable positive integer within
range of acceptable values 0 to 255 consecutive unsuccessful authentication attempts occur related
to authentication attempts using the PACE password as shared password
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_AFL.1.2/PACE [Editorially Refined] When the defined number of unsuccessful authentication
attempts has been met, the TSF shall wait for an increasing time between receiving of the terminal
challenge and sending of the TSF response during the PACE authentication attempts.
FIA_UAU.1/PACE Timing of authentication
FIA_UAU.1.1/PACE The TSF shall allow
1. To establish the communication channel
2. Carrying out the PACE Protocol according to [4]
3. To read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS
on behalf of the user to be performed before the user is authenticated.
FIA_UAU.1.2/PACE The TSF shall require each user to be successfully authenticated before allowing
any other TSF-mediated actions on behalf of that user.
FIA_UAU.4/PACE Single-use authentication mechanisms
FIA_UAU.4.1/PACE The TSF shall prevent reuse of authentication data related to
1. PACE Protocol according to [4]
2. Authentication Mechanisms based on Triple-DES and AES
FIA_UAU.5/PACE Multiple authentication mechanisms
FIA_UAU.5.1/PACE The TSF shall provide
1. PACE Protocol according to [R2]
2. Passive Authentication according to [R3]
3. Secure messaging in MAC-ENC mode according to [R2]
to support user authentication.
FIA_UAU.5.2/PACE The TSF shall authenticate any user's claimed identity according to the following
rules:
1. Having successfully run the PACE protocol the TOE accepts only received commands with correct
message authentication code sent by means of secure messaging with the key agreed with the
terminal by means of the PACE protocol
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_UAU.6/PACE Re-authenticating
FIA_UAU.6.1/PACE The TSF shall re-authenticate the user under the conditions each command sent
to the TOE aftter successful run of the PACE protocol shall be verified as being sent by the PACE
terminal
FIA_UID.1/PACE Timing of identification
FIA_UID.1.1/PACE The TSF shall allow
1. To establish the communication channel
2. Carrying out the PACE Protocol according to [4]
3. To read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS
on behalf of the user to be performed before the user is identified.
FIA_UID.1.2/PACE The TSF shall require each user to be successfully identified before allowing any
other TSF-mediated actions on behalf of that user.
FMT_MTD.1/PACE_KEY_READ Management of TSF data
FMT_MTD.1.1/PACE_KEY_READ The TSF shall restrict the ability to read the
1. PACE passwords
to none.
FMT_SMR.1/PACE Security roles
FMT_SMR.1.1/PACE The TSF shall maintain the roles
1. Terminal
2. PACE authenticated BIS-PACE
FMT_SMR.1.2/PACE The TSF shall be able to associate users with roles.
FPT_EMS.1/PACE TOE Emanation
FPT_EMS.1.1/PACE The TOE shall not emit power variations, timing variations during command
execution in excess of non useful information enabling access to
1. PACE: Session Keys (PACE-KMAC, PACE-KENC), Ephemeral Private Key ephem SKSIC-PACE
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FPT_EMS.1.2/PACE The TSF shall ensure any unauthorized users are unable to use the following
interface smart card circuit contacts to gain access to
1. PACE: Session Keys (PACE-KMAC, PACE-KENC), Ephemeral Private Key ephem SKSIC-
PACE
FTP_ITC.1/PACE Inter-TSF trusted channel
FTP_ITC.1.1/PACE The TSF shall provide a communication channel between itself and another
trusted IT product that is logically distinct from other communication channels and provides assured
identification of its end points and protection of the channel data from modification or disclosure.
FTP_ITC.1.2/PACE The TSF shall permit another trusted IT product to initiate communication via the
trusted channel.
FTP_ITC.1.3/PACE The TSF shall enforce communication via the trusted channel for any data
exchange between the TOE and the Terminal
FPT_TST.1/PACE TSF testing
FPT_TST.1.1/PACE The TSF shall run a suite of self tests to demonstrate the correct operation of self
tests at the conditions:
- When performing a PACE authentication
to demonstrate the correct operation of the TSF
FPT_TST.1.2/PACE The TSF shall provide authorised users with the capability to verify the integrity of
TSF data.
FPT_TST.1.3/PACE The TSF shall provide authorised users with the capability to verify the integrity of
stored TSF executable code.
FMT_MTD.1/PA Management of TSF data
FMT_MTD.1.1/PA The TSF shall restrict the ability to write the Document Security Objects (SOD) to
Personalization Agent.
9.1.6 PACE CAM SFR
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_UAU.1/PACE_CAM Timing of authentication
FIA_UAU.1.1/PACE_CAM The TSF shall allow
1. Carrying out the PACE Protocol according to [4]
on behalf of the user to be performed before the user is authenticated.
FIA_UAU.1.2/PACE_CAM The TSF shall require each user to be successfully authenticated before
allowing any other TSF-mediated actions on behalf of that user.
FIA_UAU.4/PACE_CAM Single-use authentication mechanisms
FIA_UAU.4.1/PACE_CAM The TSF shall prevent reuse of authentication data related to
Aditionally to FIA_UAU.4/PACE
1. PACE CAM Protocol according to [4]
FIA_UAU.5/PACE_CAM Multiple authentication mechanisms
FIA_UAU.5.1/PACE_CAM The TSF shall provide
1. PACE CAM Protocol according to [4]
to support user authentication.
FIA_UAU.5.2/PACE_CAM The TSF shall authenticate any user's claimed identity according to the
following rules:
The same rules from FIA_UAU.5.2/PACE applies, with the PACE_CAM protocol
FIA_UAU.6/PACE_CAM Re-authenticating
FIA_UAU.6.1/PACE_CAM The TSF shall re-authenticate the user under the conditions each command
sent to the TOE aftter successful run of the PACE CAM protocol shall be verified as being sent by
the PACE terminal
FIA_UID.1/PACE_CAM Timing of identification
FIA_UID.1.1/PACE_CAM The TSF shall allow additionally to FIA_UID.1/PACE:
1. Carrying out the PACE CAM Protocol according to [4]
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
on behalf of the user to be performed before the user is identified.
FIA_UID.1.2/PACE_CAM The TSF shall require each user to be successfully identified before allowing
any other TSF-mediated actions on behalf of that user.
FMT_MTD.1/PACE_CAM_KEY_READ Management of TSF data
FMT_MTD.1.1/PACE_CAM_KEY_READ The TSF shall restrict the ability to read the
1. PACE passwords
2. PACE CAM Private Key
to none.
FMT_MTD.1/PACE_CAM_KEY_WRITE Management of TSF data
FMT_MTD.1.1/PACE_CAM_KEY_WRITE The TSF shall restrict the ability to write the PACE CAM
private key to Personalization Agent
9.2 Security Assurance Requirements
The security assurance requirement level is EAL5 augmented with ALC_DVS.2, AVA_VAN.5.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
10 TOE SUMMARY SPECIFICATION
10.1 TOE Summary Specification
Access Control in reading
This function controls access to read functions and enforces the security policy for data retrieval.
Prior to any data retrieval, it authenticates the actor trying to access the data, and checks the access
conditions are fulfilled as well as the life cycle state.
It ensures that at any time, the following keys are never readable:
- PACE keys
- PACE CAM keys
- Chip Authentication keys
- Active Authentication private key
- Personalization Agent keys
- MSK and LSK
It controls access to the CPLC data as well:
- It ensures the CPLC data can be read during the personalization phase
- It ensures it can not be readable in free mode at the end of the personalization step
Regarding the file structure:
In the operational use:
- The terminal can read user data (except DG3 & DG4), the Document Security Object, EF.CVA,
EF.COM only after PACE authentication and through a valid secure channel
- When the EAC was successfully performed, the terminal can only read the DG3 & DG4
provided the access rights are sufficient throught a valid secure channel
In the personalization phase
- The Personalization Agent can read all the data stored in the TOE after it is authenticated by
the TOE (using its authentication keys).
It ensures as well that no other part of the memory can be accessed at anytime
Access Control in writing
This function controls access to write functions (in EEPROM) and enforces the security policy for data
writing. Prior to any data update, it authenticates the actor, and checks the access conditions are
fulfilled as well as the life cycle state.
It ensures as well the CPLC data can not be written anymore once the TOE is personalized and that it
is not possible to load an additional code.
Regarding the file structure
In the operational use:
It is not possible to create any files (system or data files). Furthermore, it is not possible to update
any system files. However
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
- the application data is still accessed internally by the application for its own needs
- The root CVCA key files and temporary key files are updated internally by the application
according to the authentication mechanism described in [R38]
-
In the personalization phase
- The Personalization Agent can create and write through a valid secure channel all the data
files it needs after it is authenticated by the TOE (using its authentication keys).
Active Authentication
This security functionality ensures the Active Authentication is performed as described in [R38]. (if it
is activated by the personnalizer).
Chip Authentication
This security functionality ensures the Chip Authentication is performed as described in [R38] (if it is
activated by the personnalizer). It could be used as an alternative of Active Authentication to
reinforce the Authentication of the Chip. It differs from an EAC not performing the Terminal
Authentication.
PACE mechanism
This security functionality ensures the PACE is correctly performed. It can only be performed once
the TOE is personalized with the PACE password. Furthermore, this security functionalities ensures
the correct calculation of the PACE session keys.
PACE_CAM mechanism
This security functionality ensures the PACE_CAM is correctly performed. It can only be performed
once the TOE is personalized with :
- the chip authentication mapping (CAM) keys the Personnalization Agent loaded during the
personalization phase
- the PACE password.
Furthermore, this security functionalities ensures the correct calculation of the PACE_CAM session
keys.
Personalization
This security functionality ensures the TOE, when delivered to the Personnalization Agent, demands
an authentication prior to any data exchange. This authentication is based on a symmetric
Authentication mechanism based on a Triple DES or AES algorithm. This TSF can use a Secure
Messaging described in the TSF Secure Messaging.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Physical protection
This security functionality protects the TOE against physical attacks.
Prepersonalization
This security functionality ensures the TOE, when delivered to the Prepersonnalization Agent,
demands an authentication prior to any data exchange. This authentication is based on a symmetric
Authentication mechanism based on a Triple DES or AES algorithm. This function is in charge of pre-
initializing the product and loading additional code if needed. This TSF is conformant with [R44]. This
TSF can use a Secure Messaging described in the TSF Secure Messaging.
Safe state management
This security functionalities ensures that the TOE gets back to a secure state when
- an integrity error is detected by F.SELFTESTS
- a tearing occurs (during a copy of data in EEPROM)
This security functionality ensures that such a case occurs, the TOE is either switched in the state "kill
card" or becomes mute.
Secure Messaging
This security functionality ensures the confidentiality, authenticity & integrity of the communication
between the TOE and the IFD. After a successful PACE authentication and successful Chip
Authentication, a secure channel is established based on Triple DES algorithm, and after a successful
Chip Authentication , a secure channel is (re)established based on Symetric algorithms (Triple DES,
AES128, 192 or 256).
This security functionality ensures
- No commands were inserted, modified nor deleted within the data flow
- The data exchanged remain confidential
- The issuer of the incoming commands and the destinatory of the outgoing data is the one
that was authenticated (through PACE or EAC)
-
If an error occurs in the secure messaging layer, the session keys are destroyed.
This Secure Messaging can be combined with the Active Authentication.
This TSF can provide a GP Secure Messaging (SCP02 or SCP03) for the Prepersonalization or
Personalization.
Self tests
The TOE performs self tests to verify the integrity on the TSF data:
- Before the TSF data usage
- The additional code integrity is checked at each POWER ON of the card
- The integrity of keys and sensitive data is ensured
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
11 RATIONALES
Threats Security Objectives
T.Skimming OT.Data_Int, OT.Data_Auth, OT.Data_Conf, OT.MRD_Holder
T.Eavesdropping OT.Data_Conf
T.Tracing OT.Tracing, OE.MRD_Holder
T.Forgery
OT.AC_Pers, OE.Personalization, OT.Data_Int, OT.Data_Auth, OT.Prot_Phys-
Tamper, OT.Prot_Abuse-Func, OE.Terminal, OE.Pass_Auth_Sign,
OE.Exam_MRD_AA
T.Abuse-Func OT.Prot_Abuse-Func, OE.Personalization
T.Information_Leakage OT.Prot_Inf_Leak
T.Phys-Tamper OT.Prot_Phys-Tamper
T.Malfunction OT.Prot_Malfunction
T.Counterfeit
OT.CA_Proof, OT.Data_Int_CA, OE.Auth_Key_MRD, OE.Terminal, OT.AA_Proof,
OT.Data_Int_AA, OE.Activ_Auth_Verif
T.Unauthorized_Load OT.Secure _Load_ACode
T.Bad_Activation OT.Secure _AC_Activation
T.TOE_Identification_Forgery OT.TOE_Identification
Table 11- Threats and Security Objectives – coverage
OSP Security Objectives
P.Manufact OT.Identification
P.Pre_operational OT.Identification, OT.AC_Pers, OE.Personalization, OE.Legislative_Compliance
P.Card_PKI OE.Passive_Auth_Sign
P.Trustworthy_PKI OE.Passive_Auth_Sign
P.Terminal OE.Terminal
P.Activ_Auth OT.AA_Proof
P.Chip_Auth OT.CA_Proof
Table 12 - OSPs and Security Objectives – Coverage
Assumptions OE
A.Passive_Auth OE.Passive_Auth_Sign, OE.Terminal
A.Insp_Sys_AA OE.Exam_MRD_AA, OE.Prot_Logical_MRD_AA
A.Insp_Sys_CA OE.Exam_MRD_CA, OE.Prot_Logical_MRD_CA
A.Signature_PKI OE.Pass_Auth_Sign, OE.Exam_MRD_CA, OE.Activ_Auth_Sign
Table 13 - Assumptions and OE – Coverage
The other rationales are available in the complete ST.
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
12 REFERENCES
MRTD specifications
[R1] Machine Readable Travel Documents Technical Report, PKI for Machine Readable Travel
Documents Offering ICC Read-Only Access, Version - 1.1, Date - October 01, 2004,
published by authority of the secretary general, International Civil Aviation Organization
[R2] ICAO Doc 9303, Machine Readable Travel Documents, part 1 – Machine Readable
Passports, Sixth Edition, 2006, International Civil Aviation Organization
[R3] ICAO Doc 9303, Machine Readable Travel Documents, part 3 – Machine Readable Offical
Travel Documents, Specifications for electronically enabled offical travel documents with
biometric identification capabilities (including supplement), ICAO doc 93003, 2008
[R4] Development of a logical data structure – LDS for optional capacity expansion
technologies Machine Readable Travel Documents Technical Report, Development of a
Logical Data Structure – LDS, For Optional Capacity Expansion Technologies, Revision –
1.7, published by authority of the secretary general, International Civil Aviation
Organization, LDS 1.7, 2004-05-18
[R5] Advanced Security Mechanisms for Machine readable travel documents – Extended
Access control (EAC) – TR03110 – v1.11
[R6] Annex to Section III Security Standards for Machine Readable Travel Documents Excerpts
from ICAO Doc 9303, Part 1 - Machine Readable Passports, Fifth Edition – 2003
IDL specifications
[R7] Information Technology - Personal Identification — ISO Compliant Driving Licence — Part
1:Physical characteristics and basic data set, ISO/IEC 18013-1:2005
[R8] Information Technology - Personal Identification — ISO Compliant Driving Licence — Part
2: Machine-readable technologies, ISO/IEC 18013-2:2008
[R9] Information Technology - Personal Identification — ISO Compliant Driving Licence — Part
3: Access control, authentication and integrity validation, ISO/IEC 18013-3:2009
Protection Profiles
[R10] Smartcard IC Platform Protection Profile v 1.0 - BSI-PP-0035 15/06/2007
[R11] Machine readable travel documents with “ICAO Application”, Basic Access control – BSI-
PP-0055 v1.10 25th
march 2009
[R12] Machine readable travel documents with “ICAO Application”, Extended Access control –
BSI-PP-0056 v1.10 25th
march 2009
[R13] Machine readable travel documents with “ICAO Application”, Extended Access Control
with PACE (EAC PP) – BSI-PP-0056 V2 – 2012
[R14] MRTD with PACE – PP-0068v2
[R15] E-passport: adaptation and interpretation of e-passport Protection Profiles,
SGDN/DCSSI/SDR, ref. 10.0.1, February 2007
[R16] Embedded Software for Smart Security Devices, Basic and Extended Configurations,
ANSSi-CC-PP-2009/02, 1/12/2009
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
[R17] Technical Report, Supplemental Access Control for Machine Readable Travel Documents
– version v1.01
Chips References
[R18] Certification report - BSI-DSZ-CC-0978-2016 - NXP Secure Smart Card Controller
P60x144/080 PVA/PVE(Y/B) with IC dedicated software FW5.0
Standards
[R19] ISO/IEC 7816-4:2013 – Organization, security and commands for interchange
[R20] Technical Guideline: Elliptic Curve Cryptography according to ISO/IEC 15946.TR-ECC, BSI
2006
[R21] ISO/IEC 15946-1. Information technology – Security techniques – Cryptographic
techniques based on elliptic curves – Part 1: General, 2002
[R22] ISO/IEC 15946-2. Information technology – Security techniques – Cryptographic
techniques based on elliptic curves – Part 2: Digital signatures, 2002
[R23] ISO/IEC 15946: Information technology — Security techniques — Cryptographic
techniques based on elliptic curves — Part 3: Key establishment, 2002
[R24] ISO/IEC 9796-2:2002 - Information technology - Security techniques - Digital signature
schemes giving message recovery - Part 2: Mechanisms using a hash-function
[R25] PKCS #3: Diffie-Hellman Key-Agreement Standard, An RSA Laboratories Technical Note,
Version 1.4 Revised November 1, 1993
[R26] Federal Information Processing Standards Publication 180-2 Secure Hash Standard (+
Change Notice to include SHA-224), U.S. DEPARTMENT OF COMMERCE/National Institute
of Standards and Technology, 2002 August 1
[R27] AMERICAN NATIONAL STANDARD X9.62-1998: Public Key Cryptography For The
Financial Services Industry (rDSA), 9 septembre 1998
[R28] Jakob Jonsson and Burt Kaliski. Public-key cryptography standards (PKCS) #1: RSA
cryptography specifications version 2.1. RFC 3447, 2003
[R29] RSA Laboratories. PKCS#1 v2.1: RSA cryptography standard. RSA Laboratories Technical
Note, 2002
[R30] ANSI X9.31 - Digital Signatures Using Reversible Public Key Cryptography for the
Financial Services Industry (rDSA), 1998.
[R31] FIPS 46-3 Data Encryption Standard (DES)
[R32] ISO/IEC 9797-1:1999 "Codes d'authentification de message (MAC) Partie 1: Mécanismes
utilisant un cryptogramme bloc"
[R33] NIST SP 800-90 – Recommendation for Random Number Generation Using Deterministic
Random Bit Generators (Revised)
[R34] FIPS 197 – Advance Encryption Standard (AES)
[R35] ISO/IEC 11770-2. Information Technology – Security techniques – Key management –
part 2: Mechanisms using symmetric techniques, 1996
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
Misc
[R36] Anwendungshinweise und Interpretationen zum Schema, AIS31: Funktionalitätsklassen
und Evaluationsmethodologie für physikalische Zufallszahlengeneratoren, Version 1,
25.09.2001, Bundesamt für Sicherheit in der Informationstechnik
[R37] NOTE-10 - Interpretation with e-passport PP_courtesy translation-draft v0.1
[R38] Advanced Security Mechanisms for Machine Readable Travel Documents part 1 –
Technical Guideline TR-03110-1 – version 2.10 March 2012
[R39] Advanced Security Mechanisms for Machine Readable Travel Documents part 2 –
Technical Guideline TR-03110-2 – version 2.10 March 2012
[R40] Advanced Security Mechanisms for Machine Readable Travel Documents part 3 –
Technical Guideline TR-03110-3 – version 2.10 March 2012
CC
[R41] Common Criteria for Information Technology security Evaluation Part 1: Introduction and
general model, CCMB-2012-09-001, version 3.1 Revision 4 Final, September 2012
[R42] Common Criteria for Information Technology security Evaluation Part 2: Security
Functional Components, CCMB-2012-09-002, version 3.1 Revision 4 Final, September
2012
[R43] Common Criteria for Information Technology security Evaluation Part 3: Security
Assurance Components, CCMB-2012-09-003, version 3.1 Revision 4 Final, September
2012
[R44] ANSSI-CC note 6 – v0.91
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves -
92700 Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
13 ACRONYMS
AA Active Authentication
BAC Basic Access Control
CC Common Criteria Version 3.1 revision 4
CPLC Card personalization life cycle
DF Dedicated File
DFA Differential Fault Analysis
DG Data Group
EAL Evaluation Assurance Level
EF Elementary File
EFID File Identifier
DES Digital encryption standard
DH Diffie Hellmann
I/0 Input/Output
IC Integrated Circuit
ICAO International Civil Aviation organization
ICC Integrated Circuit Card
IFD Interface device
LDS Logical Data structure
MF Master File
MRTD Machine readable Travel Document
MRZ Machine readable Zone
MSK Manufacturer Secret Key
OCR Optical Character Recognition
OS Operating System
PKI Public Key Infrastructure
PP Protection Profile
SFI Short File identifier
SHA Secure hashing Algorithm
SOD Security object Data
TOE Target of Evaluation
TSF TOE Security function
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves - 92700
Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
INDEX
A
A.BAC-Keys ....................................................40
A.Insp_Sys......................................................39
A.Insp_Sys_AA...............................................40
A.Insp_Sys_CA ...............................................40
A.MRTD_Delivery ..........................................39
A.MRTD_Manufact........................................39
A.Pers_Agent.................................................39
Access__Control__in__reading.....................71
Access__Control__in__writing......................71
Active__Authentication.................................71
Attacker.........................................................34
Authenticity__of__the__MRTD's__chip.......35
B
BAC__mechanism..........................................71
F
FAU_SAS.1/MP..............................................59
FAU_STG.2/MP_Add_code ...........................52
FCS_CKM.1/BAC ............................................61
FCS_CKM.1/CA_DH_SM_3DES......................66
FCS_CKM.1/CA_DH_SM_AES ........................66
FCS_CKM.1/CA_ECDH_SM_3DES..................66
FCS_CKM.1/CA_ECDH_SM_AES ....................67
FCS_CKM.1/MP .............................................54
FCS_CKM.1/MP_Add_code...........................52
FCS_CKM.4/Global ........................................50
FCS_COP.1/AA_DSA ......................................60
FCS_COP.1/AA_ECDSA ..................................60
FCS_COP.1/BAC_AUTH..................................62
FCS_COP.1/BAC_ENC ....................................62
FCS_COP.1/BAC_MAC ...................................62
FCS_COP.1/BAC_SHA ....................................62
FCS_COP.1/CA_MAC_SM_3DES....................68
FCS_COP.1/CA_MAC_SM_AES ......................68
FCS_COP.1/CA_SHA_SM_3DES .....................67
FCS_COP.1/CA_SHA_SM_AES....................... 67
FCS_COP.1/CA_SYM_SM_3DES.................... 67
FCS_COP.1/CA_SYM_SM_AES...................... 67
FCS_COP.1/MP_AUTH_3DES........................ 55
FCS_COP.1/MP_AUTH_AES .......................... 55
FCS_COP.1/MP_ENC_3DES........................... 54
FCS_COP.1/MP_Enc_Add_code ................... 52
FCS_COP.1/MP_ENC_AES............................. 54
FCS_COP.1/MP_MAC_3DES ......................... 55
FCS_COP.1/MP_MAC_Add_code ................. 52
FCS_COP.1/MP_MAC_AES............................ 55
FCS_COP.1/MP_SHA..................................... 56
FCS_RND.1/Global ........................................ 50
FDP_ACC.1/BAC............................................ 64
FDP_ACC.2/MP ............................................. 56
FDP_ACF.1/BAC ............................................ 64
FDP_ACF.2/MP.............................................. 56
FDP_DAU.1/AA ............................................. 60
FDP_ITC.1/AA................................................ 61
FDP_ITC.1/CA................................................ 68
FDP_ITC.1/MP............................................... 56
FDP_UCT.1/BAC...................................... 62, 70
FDP_UCT.1/MP ............................................. 57
FDP_UIT.1/BAC............................................. 63
FDP_UIT.1/CA ............................................... 70
FDP_UIT.1/MP .............................................. 57
FDP_UIT.1/MP_Add_code............................ 53
FIA_AFL.1/BAC.............................................. 65
FIA_AFL.1/MP ............................................... 57
FIA_API.1/CA................................................. 66
FIA_UAU.1/BAC ............................................ 65
FIA_UAU.1/CA............................................... 68
FIA_UAU.1/MP.............................................. 57
FIA_UAU.4/BAC ............................................ 65
FIA_UAU.4/MP_3DES ................................... 58
FIA_UAU.4/MP_AES ..................................... 58
FIA_UAU.5/BAC ............................................ 65
FIA_UAU.5/CA_3DES .................................... 68
FIA_UAU.5/MP_3DES ................................... 58
FIA_UAU.5/MP_AES ............................... 58, 69
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves - 92700
Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
FIA_UAU.6/BAC.............................................65
FIA_UAU.6/CA ...............................................69
FIA_UID.1/BAC...............................................65
FIA_UID.1/CA.................................................69
FIA_UID.1/MP................................................57
FMT_LIM.1/BAC ............................................63
FMT_LIM.1/Global.........................................50
FMT_LIM.2/BAC ............................................63
FMT_LIM.2/Global.........................................50
FMT_MOF.1/AA.............................................61
FMT_MTD.1/AA_KEY_READ..........................61
FMT_MTD.1/AA_KEY_WRITE ........................61
FMT_MTD.1/BAC_KEY_READ........................63
FMT_MTD.1/BAC_KEY_WRITE ......................63
FMT_MTD.1/CA_KEY_READ..........................70
FMT_MTD.1/CA_KEY_WRITE ........................70
FMT_MTD.1/MP............................................58
FMT_MTD.1/MP_Add_code .........................53
FMT_MTD.1/MP_INI_DIS..............................59
FMT_MTD.1/MP_INI_ENA ............................59
FMT_MTD.1/MP_KEY_READ.........................59
FMT_MTD.1/MP_KEY_READ_Add_code.......53
FMT_MTD.1/MP_KEY_WRITE .......................59
FMT_MTD.1/MP_KEY_WRITE_Add_code.....53
FMT_SMF.1/MP.............................................59
FMT_SMR.1/BAC...........................................64
FMT_SMR.1/MP ............................................59
FMT_SMR.1/MP_Add_code..........................53
FPT_EMS.1/AA...............................................61
FPT_EMS.1/CA...............................................69
FPT_EMS.1/Global.........................................51
FPT_EMS.1/MP..............................................60
FPT_EMS.1/MP_Add_code ...........................53
FPT_FLS.1/Global...........................................51
FPT_PHP.3/Global .........................................51
FPT_TST.1/BAC..............................................63
FPT_TST.1/Global ....................................51, 69
FTP_ITC.1/MP..............................................58
FTP_ITC.1/MP_Add_code ..........................54
FTP_ITC.1/PP...............................................70
I
IC_developer................................................. 34
Inspection_System........................................ 33
L
Logical__MRTD__data.................................. 34
M
Manufacturer................................................ 33
MRTD_Holder ............................................... 34
O
OE.Auth_Key_MRTD..................................... 45
OE.BAC-Keys ................................................. 44
OE.Exam_MRTD...........................31, 44, 45, 46
OE.MRTD___Delivery ................................... 43
OE.MRTD_Manufact..................................... 43
OE.Pass_Auth_Sign....................................... 44
OE.Passive_Auth_Verif ................................. 44
OE.Personalization........................................ 44
OE.Prot_Logical_MRTD................................. 45
OT.AA_Proof................................................. 42
OT.AC_Pers................................................... 41
OT.CA_Proof ................................................. 42
OT.Data_Conf ............................................... 41
OT.Data_Int................................................... 41
OT.Data_Int_AA............................................ 42
OT.Data_Int_CA............................................ 42
OT.Identification........................................... 41
OT.Prot_Abuse-Func..................................... 41
OT.Prot_Inf_Leak.......................................... 41
OT.Prot_Malfunction.................................... 42
OT.Prot_Phys-Tamper .................................. 42
OT.Secure_AC_Activation............................. 43
OT.Secure_Load_ACode ............................... 43
OT.TOE_Identification .................................. 43
P
P.Activ_Auth ................................................. 39
P.Chip_Auth.................................................. 39
ID-One eIDL v1.0 in PACE configuration with AA, CA and PACE
CAM on NXP P60x144 PVA/PVE – Public Security Target
T. +33 (0)1 78 01 70 00 I F. +33 (0)1 78 01 70 20 I Oberthur Technologies - 420, rue d’Estienne d’Orves - 92700
Colombes - France I info@oberthur.com
S.A. AU CAPITAL de 22 310 409,20€ - RCS NANTERRE 340 709 534
P.Manufact....................................................38
P.Personal_Data ............................................38
P.Personalization...........................................38
Personalisation__Agent__Authentication ....72
Personalization_Agent ..................................33
Physical__protection.....................................72
Prepersonalizer .............................................34
S
Safe__state__management ..........................72
Secure__Messaging.......................................72
Self__tests.....................................................72
Software_developer......................................34
T
T.Abuse-Func.................................................36
T.Bad_Activation ...........................................38
T.Chip_ID .......................................................36
T.Counterfeit ...........................................37, 38
T.Eavesdropping............................................36
T.Forgery........................................................36
T.Information_Leakage .................................36
T.Malfunction................................................37
T.Phys-Tamper...............................................37
T.Skimming....................................................36
T.TOE_Identification_Forgery .......................38
T.Unauthorized_load.....................................38
Terminal ........................................................33
Traveler..........................................................34