SMARTCARD DIVISION SMARTCARD DIVISION SMD_ST19WL34_ST_05_001_V01.02 60 Pages ST19WL34 SECURITY TARGET COMMON CRITERIA FOR IT SECURITY EVALUATION 1 1/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET TABLE OF CONTENTS 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 PURPOSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 CONTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.4 COMMON CRITERIA CONFORMANCE CLAIMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 ST19WL34 TOE DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.1 ST19WL34 PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2.2 SECURE IC BASED PRODUCT LIFE-CYCLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2.3 TOE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.3.1 TOE Development Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.3.2 TOE production environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.3.3 TOE user environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.4 TOE LOGICAL PHASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.5 TOE INTENDED USAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.6 GENERAL IT FEATURES OF THE TOE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3 TOE SECURITY ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.1 ASSETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.2 ASSUMPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.2.1 Assumptions on phase 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3.3 THREATS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3.3.1 Threats on phases 2 to 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 3.4 ORGANISATIONAL SECURITY POLICIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4 SECURITY OBJECTIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.1 SECURITY OBJECTIVES FOR THE TOE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 4.2 SECURITY OBJECTIVES FOR THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . 21 4.2.1 Objectives on phase 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4.3 SECURITY OBJECTIVES RATIONALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 5 SECURITY REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 5.1 SECURITY FUNCTIONAL REQUIREMENTS FOR THE TOE . . . . . . . . . . . . . . . . . . 24 5.1.1 SUBJECTS, OBJECTS, OPERATIONS AND DATA . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.1.2 FUNCTIONAL REQUIREMENTS APPLICABLE TO TST&ISR . . . . . . . . . . . . . . . . . . 28 5.1.3 FUNCTIONAL REQUIREMENTS APPLICABLE TO PHASES 3 TO 7 . . . . . . . . . . . . 29 2/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.4 FUNCTIONAL REQUIREMENTS APPLICABLE TO USER CONFIGURATION . . . . . 36 5.2 TOE SECURITY ASSURANCE REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 5.3 REFINEMENT OF THE SECURITY ASSURANCE REQUIREMENTS . . . . . . . . . . . . 39 5.4 SECURITY REQUIREMENTS FOR THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . 40 5.4.1 Security requirements for the operational IT environment . . . . . . . . . . . . . . . . . . . . . . 40 5.4.2 Security requirements for the Non-IT environment . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 5.5 SECURITY REQUIREMENTS RATIONALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 6 TOE SUMMARY SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 6.1 STATEMENT OF TOE SECURITY FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 6.1.1 SF_INIT_A: Hardware initialisation & TOE attribute initialisation . . . . . . . . . . . . . . . . . 43 6.1.2 SF_CONFIG_A: TOE configuration switching and control . . . . . . . . . . . . . . . . . . . . . 43 6.1.3 SF_INT_A: TOE logical integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 6.1.4 SF_TEST_A: Test of the TOE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 6.1.5 SF_AUTH_A: Administrators authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 6.1.6 SF_FWL_A: Storage and Function Access Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . 44 6.1.7 SF_PHT_A: Physical tampering security function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 6.1.8 SF_ADMINIS_A: Security violation administrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 6.1.9 SF_OBS_A: Unobservability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 6.1.10 SF_SKCS_A: Symmetric Key Cryptography Support . . . . . . . . . . . . . . . . . . . . . . . . . 45 6.1.11 SF_AKCS_A: Asymmetric Key Cryptography Support . . . . . . . . . . . . . . . . . . . . . . . . 46 6.1.12 SF_ALEAS_A: Unpredictable Number Generation Support . . . . . . . . . . . . . . . . . . . . 46 6.2 STATEMENT OF ASSURANCE MEASURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 7 PP CLAIMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 7.1 PP REFERENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 7.2 PP REFINEMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 7.3 PP ADDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 7.4 PP CLAIMS RATIONALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 8 RATIONALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 9 REFERENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Annex A 52 3/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET LIST OF FIGURES Figure 1 ST19WL34 block diagram ........................................................................................ 8 Figure 2 Secure IC based product life-cycle......................................................................... 10 4/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET LIST OF TABLES Table 1 Secure IC based product authorities by life-cycle phase .................................................8 Table 2 TOE configurations ........................................................................................................12 Table 3 Summary of security environment .................................................................................14 Table 4 Summary of security objectives .....................................................................................19 Table 5 Summary of functional security requirements for the TOE ............................................25 Table 6 FMT_MOF.1 iterations (management of security functions behaviour) .........................30 Table 7 FMT_MSA.3 and FMT_MSA.1 iterations (initialisation and management) ....................30 Table 8 Subjects, objects and applicable access control rules ..................................................32 Table 9 FPR_UNO.1 iterations (unobservability) .......................................................................34 Table 10 FCS_COP.1 iterations (cryptographic operations) ........................................................36 Table 11 FCS_CKM.1 iterations (cryptographic key generation) .................................................38 Table 12 TOE security assurance requirements ..........................................................................39 Table 13 Impact of EAL5 selection on BSI-PP-002-2001 refinements .........................................40 Table 14 Summary of security requirements for the operational IT environment .........................41 Table 15 Summary of security requirements for the non-IT environment ....................................41 SMD_ST19WL34_ST_05_001_V01.02 5/60 ST19WL34 SECURITY TARGET COMMON CRITERIA FOR IT SECURITY EVALUATION 1 INTRODUCTION 1.1 IDENTIFICATION 1 Document identification: ST19WL34 SECURITY TARGET. 2 Version number: V01.02, issued September 2005. 3 Registration: registered at ST Microelectronics under number SMD_ST19WL34_ST_05_001_V01.02. 4 TOE identification: given in Chapter 2. 1.2 PURPOSE 5 This document presents the ST19WL34 Security Target (ST) of Smartcard Integrated Circuit (IC), with its Dedicated Software (DSW), designed on the ST19W platform of STMicroelectronics. 6 This document is a sanitized version of the Security Target used for the evaluation. It is classified as public information. 7 The precise references of the Target of Evaluation (TOE) and the secure IC general features are given in Chapter 2. 8 A glossary of terms and abbreviations used in this document is given in Annex A. 1.3 CONTEXT 9 The Target of Evaluation (TOE) referred in Chapter 2, is evaluated under the French IT Security Evaluation and Certification Scheme and is developed by the Smartcard IC’s division of STMicroelectronics (STM). 10 The assurance level of the performed Common Criteria (CC) IT Security Evaluation is EAL 5 augmented. The minimum strength level for the TOE Security Functions (SFs) is SOF-high for all the security functions implemented by the TOE. 11 The intent of this ST is to specify the Security Functional Requirements (SFRs) and Security Assurance Requirements (SARs) applicable to the ST19WL34 secure IC, and to summarise its chosen SFs and assurance measures. 12 This ST claims to be an extended instantiation of the "Smartcard Integrated Circuit" Protection Profile (PP) registered and certified under the reference PP/9806 in the French IT Security Evaluation and Certification Scheme. The original text of this PP is typeset as indicated here when it is reproduced in this document. 6/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 13 This ST claims to be an instantiation of the "Smartcard IC Platform" Protection Profile (PP) registered and certified under the reference BSI-PP-002-2001 in the German IT Security Evaluation and Certification Scheme with the following augmentations: - Addition #1: “Support of Cipher Schemes” from AUG - Addition #4: "Area based Memory Access Control" from AUG The original text of this PP is typeset as indicated here, its augmentations from AUG as indicated here, when they are reproduced in this document. 14 Certifying authorities have recognized both Protection Profiles to lead to comparable chip security evaluations, as stated in "BSI_9806_0002_2001" and in "DCSSI_CCN.624", although with slightly different conclusions with respect to composition, see "DCSSI_CCN.648". 15 Extensions introduced in this ST to the SFRs of both Protection Profile (PP) are exclusively drawn from the Common Criteria part 2 standard SFRs. 16 This ST makes various refinements to the above mentioned PPs. They are all properly identified in the text typeset as indicated here. The original text of the PPs is repeated as scarcely as possible in this document for reading convenience. All PPs identifiers have been however prefixed by their respective PP origin label: 9806 for PP/9806, BSI for BSI- PP-002-2001, AUG1 for Addition #1 of AUG and AUG4 for Addition #4 of AUG. This conservative approach leads undoubtedly to some redundancy but enables full traceability. 1.4 COMMON CRITERIA CONFORMANCE CLAIMS 17 The ST19WL34 Security Target is: - PP/9806 conformant, extended with two CCIMB-2004-01-002 SFRs, - BSI-PP-002-2001 conformant, augmented with AUG additions #1 and #4, - EAL 5 augmented by ALC_DVS.2, AVA_MSU.3 and AVA_VLA.4, - The minimum strength of functions level for the SFRs is SOF-high, - CCIMB-2004-01-002 extended (as per BSI-PP-002-2001 requirements) - CCIMB-2004-01-003 conformant. 7/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 2 ST19WL34 TOE DESCRIPTION 2.1 ST19WL34 PRODUCT DESCRIPTION 18 This section describes the ST19WL34 product as assembly of the highly reliable CMOS ST19W platform. 19 The general features of the circuit are: - 8-bit processing unit - volatile (SRAM) and non volatile memories (ROM and EEPROM) - security blocks : Memory Access Control Logic (MACL), clock generator, security administrator, power manager - supporting functions : I/O ports (contact), 8-bit timers, Unpredictable Number Generator 20 The TOE also includes in the ROM a Dedicated Software which comprises test capabilities (test operating system, called "autotest") and libraries (system ROM library, cryptographic library for DES (EDES implentation), AES and RSA algorithms). 21 The TOE is a silicon chip with its Dedicated Software. 22 The TOE submitted to evaluation does not comprise any specific application : there is no applicative Embedded Software, but the ROM of the tested samples contains an operating system called "Card Manager" that allows the evaluators to use a set of commands with the I/O, and to load in EEPROM (or in RAM) test softwares. 23 Figure 1 provides a block diagram overview of the ST19WL34. 8/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Figure 1 ST19WL34 block diagram 2.2 SECURE IC BASED PRODUCT LIFE-CYCLE 24 The secure IC based product life-cycle is decomposed into 7 phases. Each of these phases have the very same boundaries as those defined in both claimed protection profiles. 25 The authorities involved in each phase are described in Table 1. 26 The limit of the evaluation defines the scope of responsibility of STM in terms of security. This limit, corresponding to the term "TOE Delivery" of BSI-PP-002-2001, is phase 3. 27 The limit of the evaluation corresponds to phases 2 and 3, including the delivery and verification procedures of phase 1, and the TOE delivery to the IC packaging manufacturer ; procedures corresponding to phases 1, 4, 5, 6 and 7 are outside the scope of this evaluation. 28 Figure 2 describes the secure IC based product life cycle. Table 1 Secure IC based product authorities by life-cycle phase Phase Name, authority and description 1 Secure IC embedded software development: the secure IC embedded software developer is in charge of the secure IC embedded software development and the specification of IC pre-personalization requirements. INTERNAL BUS MEMORY ACCESS FIREWALL I/O 1 SERIAL I/O INTER- FACE GND 8 BIT CPU 3 X 8 BIT TIMERS CRC MODULE CLK CLOCK GENE- RATOR MODULE ST ROM, MAP and EDES FIREWALL RAM USER ROM ST ROM and CRYPTO LIBRARY EDES ACCELE- RATOR MAP 432 Vcc GUN A & GUN B SECU- RITY ADMIN. RESET EEPROM 9/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 2 IC development: STM designs the IC, develops IC dedicated software, provides information, software or tools to the secure IC embedded software developer, and receives the secure IC embedded software from the developer, through trusted delivery and verification procedures. From the IC design, IC dedicated software and secure IC embedded software, he constructs the secure IC database, necessary for the IC photomask fabrication. 3 IC manufacturing and testing: STM is responsible for producing the IC through three main steps: IC manufacturing, IC testing, and IC pre-personalization. 4 IC packaging and testing: the IC packaging manufacturer is responsible for the IC packaging and testing. 5 Secure IC product finishing process: the secure IC product manufacturer is responsible for the secure IC product finishing process and testing. 6 Secure IC personalization: the personalizer is responsible for the secure IC personalization and final tests. Other secure IC embedded software may be loaded onto the chip in the personalization process. 7 Secure IC end-usage: the secure IC issuer is responsible for the secure IC product delivery to the secure IC end- user and for the end of life process. Table 1 Secure IC based product authorities by life-cycle phase Phase Name, authority and description 10/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Figure 2 Secure IC based product life-cycle IC pre-personalization requirements Secure IC embedded software development Secure IC database construction Secure IC photomask fabrication Development phase Phase 1 Phase 2 Test and pre-personalization programs development & maintenance Dedicated software development Secure IC development Secure IC manufacturing Secure IC testing & pre-personalization Secure IC product finishing process & testing Secure IC product personalization & testing Secure IC product end-usage & end of life process C_DELIVERY_PHASE Production phase(s) Secure IC usage phases Phase 3 Phase 4 Phase 5 Phase 6 Phase 7 Secure IC packaging & testing Trusted delivery & verification procedures Internal security organisational procedures optional elements Keys: 11/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 2.3 TOE ENVIRONMENT 29 Considering the TOE, three types of environment are defined: - Development environment corresponding to phase 2, - Production environment corresponding to phase 3, - User environment, corresponding to phases 4 up to 7. 2.3.1 TOE Development Environment 30 The development environment is described in the PP/9806, section 2.3.1. 31 This description has been refined in the ST19W Generic Security Target to include industrial parameters whose definition is reproduced hereafter for readers convenience. 32 The development centres actually involved in the development of the TOE are the following: ST ROUSSET AND ST ANG MO KIO, for the design activities, ST ROUSSET, for the engineering activities and for the software development activities. 2.3.2 TOE production environment 33 The production environment is described in the PP/9806, section 2.3.2. 34 This description has been refined in the ST19W Generic Security Target to include industrial parameters whose definition is reproduced hereafter for readers convenience. 35 The authorized front-end plant actually involved in the manufacturing of the TOE is ST ROUSSET. 36 The authorized sub-contractor actually involved in the TOE mask manufacturing is DNP. 37 The authorized EWS plant actually involved in the testing of the TOE is ST ROUSSET. 2.3.3 TOE user environment 38 The TOE User environment is described in the PP/9806, section 2.3.3. 2.4 TOE LOGICAL PHASES 39 During its construction and usage, the TOE is under several life logical phases. These phases are ordered under a logical controlled sequence. The change from one phase to the next is under control of the TOE. 40 The logical phases available on the ST19WL34 are: - TEST configuration, then - ISSUER configuration, then - USER configuration. 41 Once into a given configuration, the TOE cannot be stepped back to any previous configuration. 12/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 42 During phases 4 to 6, the TOE may be in ISSUER or USER configuration according to the SICESW developer request. 43 Table 2 shows what the different TOE configuration can be facing the authorities who perform the phase activities for phases 4 to 7. 2.5 TOE INTENDED USAGE 44 The TOE can be incorporated in several applications such as: - banking and finance market for credit/debit cards, electronic purse (stored value cards) and electronic commerce, - network based transaction processing such as mobile phones (GSM SIM cards), pay-TV (subscriber and pay-per-view cards), communication highways (Internet access and transaction processing), - transport and ticketing market (access control cards), - governmental cards (ID-cards, healthcards, driver licenses etc....), - new emerging sectors such as multimedia commerce and Intellectual Property Rights protection. 45 The TOE intended usage is further described in the PP/9806, section 2.5. 2.6 GENERAL IT FEATURES OF THE TOE 46 The TOE IT functionality consist of data storage and processing such as: - arithmetical functions (e.g. incrementing counters in electronic purses, calculating currency conversion in electronic purses...); - data communication; - cryptographic operations (e.g. data encryption, digital signature verification...). Table 2 TOE configurations Phase & condition TOE Configuration Authority Phase 4 ISSUER or USER Packaging manufacturer (not STM) Phase 5 ISSUER or USER Secure IC product manufacturer (not STM) Phase 6 ISSUER or USER Personalizer (not STM) Phase 7 USER End-usage 13/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 3 TOE SECURITY ENVIRONMENT 47 This section describes the security aspects of the environment in which the TOE is intended to be used and addresses the description of the assumptions, the assets to be protected, the threats and the organisational security policies. 48 A summary of all these security aspects and their respective conditions is provided in Table 3. Note that the origin of each aspect is clearly identified in the prefix of its label. 49 Most of these security aspects can therefore be easily found in the respective protection profiles. Only those originating in AUG are detailed in the following sections. 3.1 ASSETS 50 Assets are security relevant elements of the TOE that include: - the application data of the TOE (such as IC pre-personalization requirements, IC and system specific data), - the User Data, especially those that can be manipulated and/or disclosed while being stored or processed by the TOE, - the secure IC embedded software, - the IC dedicated software, - the IC specification, design, development tools and technology, - TOE’s correct operation (including its random number generator and added functionality, if any). 51 The TOE itself is therefore an asset. 52 Assets have to be protected in terms of confidentiality and integrity. 53 In the following, unauthorized disclosure of an asset means that an attacker can determine a meaningful part of the asset that leads to a violation of the security policy enforced by the TOE (TSP). 54 In the following, unauthorized modification of an asset means that an attacker can perform an alteration of the asset, meaningful with respect to the security policy enforced by the TOE (TSP), that leads to a violation of the latter.. 3.2 ASSUMPTIONS 55 The assumptions are described in the PP/9806, section 3.2 and in the BSI-PP-002-2001, section 3.2. Only those originating in AUG are detailed in the following sections. 14/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Table 3 Summary of security environment Label Title Condition Assumptions 9806.A.SOFT_ARCHI Software Architecture Phase 1 BSI.A.Plat-Appl Usage of Hardware Platform BSI.A.Resp-APPL Treatment of User Data AUG1.A.Key-Function Usage of key-dependent functions 9806.A.DEV_ORG Development Organization BSI.A.Process-Card Protection during Packaging, Finishing, Personalisation Phases after delivery up to 7 9806.A.DLV_PROTECT Delivery Protection 9806.A.DLV_AUDIT Delivery Audit 9806.A.DLV_RESP Delivery Responsibility 9806.A.USE_TEST Use of Testing After delivery up to 6 9806.A.USE_PROD (BSI.A.Process-Card) Use of Security Procedures 9806.A.USE_DIAG Use of Secure Dialogue Phase 7 9806.A.USE_SYS Use of Secure System TOE threats 9806.T.CLON Functional cloning of the TOE See Table 5 of the ST19W Generic Security Target 9806.T.DIS_SOFT Unauthorized disclosure of secure IC embedded software and data 9806.T.DIS_DSOFT Unauthorized disclosure of IC dedicated software BSI.T.Leak-Inherent Inherent Information Leakage BSI.T.Leak-Forced Forced Information Leakage BSI.T.Phys-Probing Physical Probing BSI.T.RND Deficiency of Random Numbers 9806.T.DIS_DESIGN Unauthorized disclosure of IC design BSI.T.Abuse-Func Abuse of Functionality AUG4.T.Mem-Access Memory Access Violation 9806.T.MOD_SOFT Unauthorized modification of secure IC embedded software and data 9806.T.MOD_DSOFT Unauthorized modification of IC dedicated software 9806.T.MOD_DESIGN Unauthorized modification of IC design BSI.T.Malfunction Malfunction due to Environmental Stress BSI.T.Phys-Manipulation Physical Manipulation 15/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Environment threats 9806.T.DIS_INFO Disclosure of assets delivered by STM see Table 5 of the ST19W Generic Security Target 9806.T.DIS_DEL Disclosure of assets during delivery to STM 9806.T.DIS_TEST Unauthorized disclosure of test information 9806.T.DIS_TOOLS Unauthorized disclosure of development tools 9806.T.DIS_PHOTOMASK Unauthorized disclosure of photomask information 9806.T.T_DEL Theft of assets during delivery to STM 9806.T.T_SAMPLE Theft or unauthorized use of TOE silicon samples 9806.T.T_PHOTOMASK Theft or unauthorized use of TOE photomasks 9806.T.T_PRODUCT Theft or unauthorized use of secure IC based products 9806.T.MOD_DEL Modification of assets during delivery to STM 9806.T.MOD_PHOTOMASK Theft or unauthorized use of TOEs photomasks OSP S BSI.P.Process-TOE Protection during TOE Development and Production AUG1.P.Add Functions Additional Specific Security Functionality (Cipher Scheme Support) Table 3 Summary of security environment Label Title Condition 16/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 3.2.1 Assumptions on phase 1 3.3 THREATS 56 The threats are described in the PP/9806, section 3.3 and in BSI-PP-002-2001, section 3.3. Only those originating in AUG are detailed in the following sections. AUG1.A.Key-Function Usage of key-dependent functions: Key-dependent functions, if any, shall be implemented in the Smartcard Embedded Software in a way that they are not susceptible to leakage attacks (as described under BSI.T.Leak-Inherent and BSI.T.Leak-Forced). Note that here the routines that may compromise keys when being executed are part of the Smartcard Embedded Software. In contrast to this the threats BSI.T.Leak-Inherent and BSI.T.Leak-Forced address (i) the cryptographic routines which are part of the TOE and (ii) the processing of User Data including cryptographic keys. 17/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 3.3.1 Threats on phases 2 to 7 3.3.1.1 Theft or unauthorized use of assets. 3.4 ORGANISATIONAL SECURITY POLICIES 57 The TOE provides specific security functionality that can be used by the Smartcard Embedded Software. In the following specific security functionality is listed which is not derived from threats identified for the TOE’s environment because it can only be decided in the context of the smartcard application, against which threats the Smartcard Embedded Software will use the specific security functionality. 58 STM applies the policy Additional Specific Security Functionality (AUG1.P.Add Functions) as specified below. 59 STM applies the policy Protection during TOE Development and Production (BSI.P.Process-TOE) as specified below. 60 No other Organisational Security Policy (OSP) has been defined in this ST since their specifications depend heavily on the applications in which the TOE will be integrated. The security targets for the applications embedded in this TOE should further define them. AUG4.T.Mem-Access Memory Access Violation: Parts of the Smartcard Embedded Software may cause security violations by accidentally or deliberately accessing restricted data (which may include code). Any restrictions are defined by the security policy of the specific application context and must be implemented by the Smartcard Embedded Software. Clarification: This threat does not address the proper definition and management of the security rules implemented by the Smartcard Embedded Software, this being a software design and correctness issue. This threat addresses the reliability of the abstract machine targeted by the software implementation. To avert the threat, the set of access rules provided by this TOE should be undefeated if operated according to the provided guidance. The threat is not realized if the Embedded Software is designed or implemented to grant access to restricted information. It is realized if an implemented access denial is granted under unexpected conditions or if the execution machinery does not effectively control a controlled access. Here the attacker is expected to (i)take advantage of flaws in the design and/or the implementation of the TOE memory access rules (refer to BSI.T.Abuse-Func but for functions available after TOE delivery), (ii)introduce flaws by forcing operational conditions (refer to BSI.T.Malfunction) and/or by physical manipulation (refer to BSI.T.Phys-Manipulation). This attacker is expected to have a high level potential of attack 18/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET AUG1.P.Add Functions Additional Specific Security Functionality: The TOE shall provide the following specific security functionality to the Smartcard Embedded Software: - Data Encryption Standard (DES), - Triple Data Encryption Standard (3DES), - Advanced Encryption Standard (AES), - Secure Hashing (SHA-1), - Rivest-Shamir-Adleman (RSA), - Prime Number Generation (Miller-Rabin test) Note that DES is no longer recommended as an encryption function in the context of smart card applications. Hence, Smartcard Embedded Software may need to use triple DES to achieve a suitable strength, see AUG1.A.Key-Function. 19/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 4 SECURITY OBJECTIVES 61 The security objectives of the TOE cover principally the following aspects: - integrity and confidentiality of assets, - protection of the TOE and associated documentation during development and production phases, - provide random numbers, - provide cryptographic support and access control functionality. 62 A summary of all security objectives is provided in Table 4. Note that the origin of each objective is clearly identified in the prefix of its label. 63 Most of these security aspects can therefore be easily found in the respective protection profiles. Only those originating in AUG are detailed in the following sections.. Table 4 Summary of security objectives Label Title TOE 9806.O.TAMPER Prevent physical tampering of security critical parts BSI.O.Phys-Probing Protection against Physical Probing BSI.O.Phys-Manipulation Protection against Physical Manipulation 9806.O.CLON Prevent functional cloning BSI.O.Identification TOE Identification 9806.O.OPERATE Ensure SF continued correct operation BSI.O.Malfunction Protection against Malfunctions BSI.O.RND Random Numbers AUG1.O.Add-Functions Additional Specific Security Functionality 9806.O.FLAW Flawless design, implementation and operation 9806.O.DIS_MECHANISM Protection of hardware security mechanisms against unauthorized disclosure BSI.O.Abuse-Func Protection against Abuse of Functionality 9806.O.DIS_MEMORY Protection of sensitive information stored in memories against unauthorized disclosure BSI.O.Leak-Inherent Protection against Inherent Information Leakage BSI.O.Leak-Forced Protection against Forced Information Leakage 9806.O.MOD_MEMORY Protection of sensitive information stored in memories against any controlled corruption or unauthorized modification AUG4.O.Mem Access Area based Memory Access Control 20/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Environments 9806.O.DEV_DIS Controlled distribution of TOE information for development 9806.O.SOFT_DLV Trusted delivery of secure IC embedded software 9806.O.SOFT_MECH Usage of secure IC as recommended in guidance BSI.OE.Plat-Appl Usage of Hardware Platform with AUG1.Clarification & AUG4.Clarification BSI.OE.Resp-Appl Treatment of User Data with AUG1.Clarification & AUG4.Clarification 9806.O.DEV_TOOLS Usage of secure development tools BSI.OE.Process-TOE Protection during TOE Development and Production 9806.O.SOFT_ACS Controlled access to secure IC embedded software 9806.O.DESIGN_ACS Controlled access to the design of the secure IC 9806.O.DSOFT_ACS Controlled access to the dedicated software 9806.O.MECH_ACS Controlled access to security mechanisms specifications 9806.O.TI_ACS Controlled access to security relevant technology 9806.O.MASK_FAB Protection of mask deliveries and fabrication 9806.O.TOE_PRT TOE protection during production 9806.O.IC_DLV Protection of secure IC during deliveries 9806.O.DLV_PROTECT Protection of TOE material/information under delivery 9806.O.DLV_AUDIT Tracked delivery process 9806.O.DLV_RESP Qualified personnel for delivery BSI.OE.Process-Card Protection during Packaging, Finishing and Personalisation 9806.O.TEST_OPERATE Test securely operated 9806.O.USE_DIAG Secure communications in user environment 9806.O.USE_SYS Secure system in user environment Table 4 Summary of security objectives Label Title 21/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 4.1 SECURITY OBJECTIVES FOR THE TOE: 4.2 SECURITY OBJECTIVES FOR THE ENVIRONMENT AUG1.O.Add-Functions Additional Specific Security Functionality: The TOE must provide the following specific security functionality to the Smartcard Embedded Software: - Data Encryption Standard (DES), - Triple Data Encryption Standard (3DES), - Advanced Encryption Standard (AES), - Secure Hashing (SHA-1), - Rivest-Shamir-Adleman (RSA), - Prime Number Generation (Miller-Rabin test). AUG4.O.Mem Access Area based Memory Access Control: The TOE must provide the Smartcard Embedded Software with the capability to define restricted access memory areas. The TOE must then enforce the partitioning of such memory areas so that access of software to memory areas is controlled as required, for example, in a multi-application environment. 22/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 4.2.1 Objectives on phase 1 BSI.OE.Plat-Appl Usage of Hardware Platform: To ensure that the TOE is used in a secure manner the Smartcard Embedded Software shall be designed so that the requirements from the following documents are met: - (i)hardware data sheet for the TOE, - (ii)TOE application notes dedicated software user manuals, - (iii)TOE security user guidance, and - (iii)findings of the TOE evaluation reports relevant for the Smartcard Embedded Software. AUG1.Clarification: When the TOE supports cipher schemes as additional specific security functionality and if required, the Smartcard Embedded Software shall use these cryptographic services of the TOE and their interface as specified. When key-dependent functions implemented in the Smartcard Embedded Software are just being executed, the Smartcard Embedded Software must provide protection against disclosure of confidential data (User Data) stored and/or processed in the TOE by using the methods described under "Inherent Information Leakage" (BSI.T.Leak-Inherent) and "Forced Information Leakage" (BSI.T.Leak-Forced). AUG4.Clarification: For the separation of different applications, the Smartcard Embedded Software may implement a memory management scheme based upon security mechanisms of the TOE as required by the security policy defined for the specific application context. 23/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 4.3 SECURITY OBJECTIVES RATIONALE 64 The security objectives rationale has been established for the whole ST19W platform and has been presented and evaluated in the ST19W Generic Security Target. 65 For confidentiality reasons, this rationale is not reproduced here. BSI.OE.Resp-Appl Treatment of User Data: Security relevant User Data (especially cryptographic keys) are treated by the Smartcard Embedded Software as required by the security needs of the specific application context. For example the Smartcard Embedded Software will not disclose security relevant user data to unauthorised users or processes when communicating with a terminal. AUG1.Clarification: By definition cipher or plain text data and cryptographic keys are User Data. The Smartcard Embedded Software shall treat these data appropriately, use only proper secret keys (chosen from a large key space) as input for the cryptographic function of the TOE and use keys and functions appropriately in order to ensure the strength of cryptographic operation. This means that keys are treated as confidential as soon as they are generated. The keys must be unique with a very high probability, as well as cryptographically strong. For example, it must be ensured that it is beyond practicality to derive the private key from a public key if asymmetric algorithms are used. If keys are imported into the TOE and/ or derived from other keys, quality and confidentiality must be maintained. This implies that appropriate key management has to be realised in the environment. AUG4.Clarification: The treatment of User Data is still required when a multi-application operating system is implemented as part of the Smartcard Embedded Software on the TOE. In this case the multi- application operating system should not disclose security relevant user data of one application to another application when it is processed or stored on the TOE. 24/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5 SECURITY REQUIREMENTS 66 This chapter on security requirements contains a section on security functional requirements (SFRs) for the TOE (Section 5.1), a section on security assurance requirements (SARs) for the TOE (Section 5.2), a section on the refinements of these SARs (Section 5.3) and a section on security requirements for the environment (Section 5.4) as required by the "BSI-PP-002-2001" Protection Profile. This chapter includes a section with the security requirements rationale (Section 5.5). 5.1 SECURITY FUNCTIONAL REQUIREMENTS FOR THE TOE 67 Security Functional Requirements (SFRs) from the "PP/9806" Protection Profile (PP) are exclusively drawn from CCIMB-2004-01-002. 68 The following SFRs from the "BSI-PP-002-2001" Protection Profile are extensions to CCIMB-2004-01-002: - FCS_RND Generation of random numbers, - FMT_LIM Limited capabilities and availability, - FAU_SAS Audit data storage. The reader can find their certified definitions in the text of the "BSI-PP-002-2001" Protection Profile. 69 All extensions to the SFRs of the "PP/9806" and of the "BSI-PP-002-2001" Protection Profiles (PPs) are exclusively drawn from CCIMB-2004-01-002. 70 All iterations, assignments, selections, or refinements on SFRs have been performed according to section 4.4.1.3.2 of CCIMB-2004-01-001. They are easily identified in the following text as they appear as indicated here. Note that in order to improve readability, iterations are often expressed within tables. 71 The rules defined by the TOE Security Policy during phase 3 (access control and information flow control Security Functions Policies) are different from those prevailing during phases 4 to 7. 72 Since the TOE can be in the ISSUER configuration in Phases 4 to 6, as specified in Table 2, the functional requirements applicable only to phase 3 in the PP/9806, are refined into the functional requirements applicable to the logical phases TEST and ISSUER configurations (TST&ISR, for short). 73 The minimum strength of function level for the TOE security functions is SOF-high. 74 In order to ease the definition and the understanding of these security functional requirements, a simplified presentation of the TOE Security Policy (TSP) is given in the following section. For confidentiality reasons, security attributes and their related policies, TSF data, user data and acceptance/deny rules enforced by the TSF are not described in this document. 75 The selected security functional requirements for the TOE and their respective origin and type are summarized in the following pages in Table 5. 25/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Table 5 Summary of functional security requirements for the TOE Label Title Addressing Origin Type TST&ISR FIA_ATD.1 User attribute definition All objectives in TST&ISR PP/9806 Operated CCIMB-2004-01-002 FIA_UID.2 User identification before any action PP/9806 FIA_UAU.2 User authentication before any action PP/9806 FPT_TST.1 TOE Security Functions testing Correct operation PP/9806 Operated FDP_SDI.1 Stored data integrity monitoring TOE Integrity PP/9806 Operated FAU_SAS.1 Audit storage Lack of TOE identification BSI-PP-002-2001 Extended 26/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Phases 3 to 7 FMT_SMR.1 Security roles Correct operation PP/9806 Operated CCIMB-2004-01-002 FMT_MOF.1 Management of security functions behaviour FMT_MSA.3 Static attribute initialisation FMT_MSA.1 Management of security attribute FMT_SMF.1 Specification of management functions New dependency Operated FMT_LIM.1 Limited capabilities Abuse of functionality BSI-PP-002-2001 Extended FMT_LIM.2 Limited availability FDP_ACC.2 Complete Access control Memory access violation PP/9806 Operated CCIMB-2004-01-002 FDP_ACF.1 Security attribute based access control FRU_FLT.2 Limited fault tolerance Malfunction BSI-PP-002-2001 FPT_FLS.1 Failure with preservation of secure state FAU_SAA.1 Potential violation analysis PP/9806 Operated FPT_SEP.1 TSF domain separation BSI-PP-002-2001 FDP_SDI.2 Stored data integrity monitoring and action TOE Integrity Security Target Operated FPT_PHP.2 Notification of physical attack Physical manipulation & probing PP/9806 Operated FPT_PHP.3 Resistance to physical attack PP/9806 Operated BSI-PP-002-2001 FPR_UNO.1 Unobservability Leakage PP/9806 Operated FDP_ITT.1 Basic internal transfer protection BSI-PP-002-2001 FPT_ITT.1 Basic TSF data internal protection FDP_IFC.1 Subset information flow control PP/9806 Operated BSI-PP-002-2001 FDP_IFF.1 Simple security attributes PP/9806 Operated FDP_RIP.1 Subset residual information protection Security Target Operated FCS_RND.1 Quality metrics for random numbers Weak cryptographic quality of random numbers BSI-PP-002-2001 Operated Extended Table 5 Summary of functional security requirements for the TOE Label Title Addressing Origin Type 27/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.1 SUBJECTS, OBJECTS, OPERATIONS AND DATA 76 This section introduces in turn subjects, objects and operations relevant to the definition of the TSP. 5.1.1.1 Subjects 77 For any given TOE of the ST19W platform, the TSP identifies the following subjects: USER FCS_COP.1 Cryptographic operation Cipher scheme support AUG #1 Operated CCIMB-2004-01-002 FCS_CKM.1 Cryptographic key generation Security Target Operated S.TRUST STM trusted process always activated by a power on of the TOE. This process exhibits three different behaviours according to the TOE configuration. Please note that this process denotes all the active resources of the TOE controlled by the TSF, not only the executing DSW. S.PLAIN Untrusted process activated by S.TRUST. This process denotes all the active resources of the TOE not controlled by the TSF, notably the SICESW in USER configuration. S.LIB STM trusted functional process activated during a call to execute a service available in the STM library when the TOE is in USER configuration. This process denotes only the executing DSW. S.ANY Any human user that can get access to the TOE either locally (i.e. that interacts with the TOE via TOE devices) or remotely (i.e. that interacts with the TOE via another IT product) when the TOE is in any configuration. Table 5 Summary of functional security requirements for the TOE Label Title Addressing Origin Type 28/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.1.2 Objects and operations 78 For any given TOE of the ST19W platform, the TSP identifies the following objects with their associated operations. For confidentiality reasons, those objects are not completely described here.: 5.1.2 FUNCTIONAL REQUIREMENTS APPLICABLE TO TST&ISR 5.1.2.1 User attribute definition (FIA_ATD.1) 79 The TSF shall maintain the following list of security attributes belonging to individual users: - the TOE configuration, - the user authentication status. 5.1.2.2 User identification before any action (FIA_UID.2) 80 The TSF shall require each user to identify itself before allowing any other TSF mediated actions on behalf of that user. OB.F_IC Secure IC carrying the TOE in any of its forms. OB.ROM Any part of the Read Only Memory. These objects contain executable programs and/or data of STM and of the user (ST_ROM & USR_ROM). The latter may also reside in OB.NVM. . OB.RAM Any part of the Volatile Memory. These objects are used for processing user and TSF data. OB.REG Any Register of the TOE. These objects are used to control TOE resources and to exchange data with the secure IC internal subjects. OB.NVM Non Volatile Memory that contains user data, TSF data and/or user programs. OB.CMD_TST Any command available to the user when the TOE is in TEST configuration. OB.CMD_ISR Any command available to the user when the TOE is in ISSUER configuration. OB.CALL_USR Any STM library service available to the user when the TOE is in USER configuration. 29/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.2.3 User authentication before any action (FIA_UAU.2) 81 The TOE Security Functions (TSF) shall require each user to be successfully authenticated before allowing any other TSF mediated actions on behalf of that user. 5.1.2.4 TOE Security Functions testing (FPT_TST.1) 82 The TSF shall run a suite of self tests at the request of the authorised user and at TOE operating conditions to demonstrate the correct operation of the TSF. 83 The TSF shall provide authorised users with the capability to verify the integrity of the TSF data. 84 The TSF shall provide authorised users with the capability to verify the integrity of stored TSF executable code. 5.1.2.5 Stored data integrity monitoring (FDP_SDI.1) 85 The TSF shall monitor user data stored within the TSC for user ROM or NVM personalization integrity errors on all objects, based on the following attributes: memory content signature. 5.1.2.6 Audit storage (FAU_SAS.1) 86 The TSF shall provide test personnel before TOE Delivery with the capability to store the Initialisation Data and/or Pre-personalisation Data and/or supplements of the Smartcard Embedded Software in the audit records. Clarification: - test personnel before TOE Delivery, means TEST administrator if TOE delivery is in ISSUER configuration, - test personnel before TOE Delivery, means TEST administrator and/or ISSUER administrator if TOE delivery is in USER configuration. 5.1.3 FUNCTIONAL REQUIREMENTS APPLICABLE TO PHASES 3 TO 7 5.1.3.1 Security roles (FMT_SMR.1) 87 The TSF shall maintain the following roles: - TEST administrator: this role allows to perform the test of the TOE in a secure environment. - ISSUER administrator: this role allows to perform reduced test operations and personalization of the TOE if needed during phases 4 to 6. - USER: this role has capabilities defined by the SICESW functionality and the STM library services in the DSW. The functionality available to the USER role is dependent on the SICESW, the pre- personalization and the customer mask options. 88 The TSF shall be able to associate users with roles. 30/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.3.2 Management of security functions behaviour (FMT_MOF.1) 89 The TOE Security Functions shall restrict the ability to perform as indicated in Table 6 on the functions listed in Table 6 to the authorised identified roles in Table 6. 5.1.3.3 Static attribute initialisation (FMT_MSA.3) 90 The TSF shall enforce the Location Based Access Control Policy and the Construction Flow Control Policy to provide default values for security attributes that are used to enforce the security function policy as indicated in Table 7. 91 The TOE Security Functions shall allow the authorised identified roles in Table 7 to specify alternate initial values to override the default values when an object or information is created. 5.1.3.4 Management of security attributes (FMT_MSA.1) 92 The TSF shall enforce the Location Based Access Control Policy and the Construction Flow Control Policy to restrict the ability to perform operations in Table 7 to security attributes in Table 7 to the authorised identified roles in Table 7. 5.1.3.5 Specification of management functions (FMT_SMF.1) 93 The TOE Security Functions shall be capable of performing the following security management function: Table 6 FMT_MOF.1 iterations (management of security functions behaviour) [selection: determine the behaviour of, disable, enable, modify the behaviour of] [assignment: list of functions] [assignment: the authorised identified roles] modify the behaviour - SF_INIT_A - SF_CONFIG_A - SF_INT_A - SF_AUTH_A - SF_TEST_A - SF_ADMINIS_A - SF_OBS_A TEST administrator modify the behaviour - SF_CONFIG_A - SF_INT_A - SF_AUTH_A - SF_TEST_A - SF_ADMINIS_A - SF_ALEA_A ISSUER administrator Table 7 FMT_MSA.3 and FMT_MSA.1 iterations (initialisation and management) [assignment: list of security attributes] [selection: choose any of restrictive, permissive, [assignment: other property]] FMT_MSA.3 [assignment: the authorised identified roles] FMT_MSA.1 [selection: change_default, query, modify, delete, [assignment: other operations]] [assignment: the authorised identified roles] For confidentiality reasons, this table content is detailed in the ST19W Generic Security Target 31/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET - Modifying the TOE configuration - Authenticating the TEST administrator and the ISSUER administrator - Modifying the security functions behaviour as indicated in Table 6 5.1.3.6 Limited capabilities (FMT_LIM.1) 94 The TSF shall be designed in a manner that limits their capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Limited capability and availability Policy. 5.1.3.7 Limited availability (FMT_LIM.2) 95 The TSF shall be designed in a manner that limits their availability so that in conjunction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Limited capability and availability Policy. 96 SFP_1: Limited capability and availability Policy Deploying Test Features after TOE Delivery does not allow User Data to be disclosed or manipulated, TSF data to be disclosed or manipulated, software to be reconstructed and no substantial information about construction of TSF to be gathered which may enable other attacks. 97 Refinement: Test Features are those provided by the commands in the DSW : - OB.CMD_TST, if TOE delivery is in ISSUER configuration; - OB.CMD_TST and OB.CMD_ISR, if TOE delivery is in USER configuration. 5.1.3.8 Complete access control (FDP_ACC.2) 98 The TOE Security Functions shall enforce the Location Based Access Control Policy on all subjects and objects in Table 8 and all operations among subjects and objects covered by the SFP. 99 The TOE Security Functions shall ensure that all operations between any subject in the TOE Scope of Control and any object within the TOE Scope of Control are covered by an access control security functions policy. 100 For confidentiality reasons, rules are not shown in Table 8. They can be found in the ST19W Generic Security Target. 32/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.3.9 Security attribute based access control (FDP_ACF.1) 101 The TOE Security Functions shall enforce Location Based Access Control Policy to objects based on security attributes defined in the ST19W Generic Security Target. 102 The TOE Security Functions shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: - Grant S.TRUST initialisation access to OB.RAM and OB.REG. - Grant S.TRUST flash access to OB.NVM. - Those in Table 13 of the ST19W Generic Security Target. - Those in Table 14 of the ST19W Generic Security Target, when TOE is not in test configuration. 103 The TOE Security Functions shall explicitly authorise access of subjects to objects based on the following additional rules: None. 104 The TOE Security Functions shall explicitly deny access of subjects to objects based on the following additional rules: - Those "explicitly denied" of Table 13 and Table 14 of the ST19W Generic Security Target. For confidentiality reasons, Table 13 and Table 14 are not shown in this document. They can be found in the ST19W Generic Security Target. 5.1.3.10 Limited fault tolerance (FRU_FLT.2) 105 The TSF shall ensure the operation of all the TOE’s capabilities when the following failures occur: exposure to operating conditions which are not detected according to the requirement Failure with preservation of secure state (FPT_FLS.1). 5.1.3.11 Failure with preservation of secure state (FPT_FLS.1) 106 The TSF shall preserve a secure state when the following types of failures occur: Table 8 Subjects, objects and applicable access control rules Subjects S.TRUST S.PLAIN S.LIB S.ANY Objects OB.F_IC Not applicable OB.ROM Memory Access Control Logics (MACL) rules Not applicable OB.CALL_USR System Access Control Logics (SACL) rules OB.CMD_TST Test Access Control Logics (TACL) rules OB.CMD_ISR Issuer Access Control Logics (IACL) rules OB.REG Register Access Control Logics (RACL) rules OB.RAM Memory Access Control Logics (MACL) rules OB.NVM Page Access Control Logics (PACL) rules Lock Logics (LOCK) rules 33/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET exposure to operating conditions which may not be tolerated according to the requirement Limited fault tolerance (FRU_FLT.2) and where therefore a malfunction could occur. 107 Refinement: The term “failure” above means “circumstances”. The TOE prevents failures for the “circumstances” defined above. Regarding application note 16 of BSI-PP-002-2001, the TOE provides information on the operating conditions monitored during Smartcard Embedded Software execution and after a warm reset. No audit requirement is however selected in this security target. 5.1.3.12 Potential violation analysis (FAU_SAA.1) 108 The TOE Security Functions shall be able to apply a set of rules in monitoring the audited events and based upon these rules indicate a potential violation of the TOE Security Policy. 109 The TOE Security Functions shall enforce the following rules for monitoring audited events: a) Accumulation or combination of auditable events in ISSUER and USER configurations, resulting from: - operating changes by the environment, - access control violation attempts, - bad NVM or CPU usages, known to indicate a potential security violation; b) Make these indications available to the user after a warm reset. 5.1.3.13 TSF domain separation (FPT_SEP.1) 110 The TSF shall maintain a security domain for its own execution that protects it from interference and tampering by untrusted subjects. 111 The TSF shall enforce separation between the security domains of subjects in the TSC. 112 Refinement: Those parts of the TOE that support the security functional requirements “Limited fault tolerance (FRU_FLT.2)” and “Failure with preservation of secure state (FPT_FLS.1)” shall be protected from interference of the Smartcard Embedded Software. 34/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.3.14 Stored data integrity monitoring and action (FDP_SDI.2) 113 The TSF shall monitor user data stored within the TSC for: - single bit fails upon a read operation, - other actions are not described here, in OB.NVM, on all objects, based on the following attributes: redundancy data. 114 Upon detection of a data integrity error, the TSF shall perform actions that cannot be described here, for confidentiality reasons. 5.1.3.15 Notification of physical attack (FPT_PHP.2) 115 The TOE Security Functions shall provide unambiguous detection of physical tampering that might compromise the TOE Security Functions. 116 The TOE Security Functions shall provide the capability to determine whether physical tampering with the TOE security function's devices or elements has occurred. 117 For the clock and voltage supply operating changes by the environment in ISSUER and USER configurations, the TOE security functions shall monitor the devices and elements and notify the ISSUER administrator or the USER when physical tampering with the TOE security functions devices has occurred. 5.1.3.16 Resistance to physical attack (FPT_PHP.3) 118 The TOE Security Functions shall resist physical manipulation and physical probing, to the TSF by responding automatically such that the TOE security policy is not violated. 119 Note: as described in the CC part 2 annexes, technology limitations and relative physical exposure of the TOE must be considered. 120 Refinement The TOE will implement appropriate measures to continuously counter physical manipulation and physical probing. Due to the nature of these attacks (especially manipulation) the TOE can by no means detect attacks on all of its elements. Therefore, permanent protection against these attacks is required ensuring that the TSP could not be violated at any time. Hence, “automatic response” means here (i)assuming that there might be an attack at any time and (ii)countermeasures are provided at any time. 5.1.3.17 Unobservability (FPR_UNO.1) 121 In this security target, ability to observe an operation means revealing the value of a data during an operation on this data. 122 The TOE Security Functions shall ensure that all end-users are unable to observe the operations listed in Table 9 on objects listed in Table 9 by S.TRUST and S.LIB. Table 9 FPR_UNO.1 iterations (unobservability) [assignment: list of operations] [assignment: list of objects] READ OB.ROM, OB.RAM, OB.REG and OB.NVM WRITE OB.RAM PROGRAM, ERASE OB.NVM 35/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.3.18 Basic internal transfer protection (FDP_ITT.1) 123 The TSF shall enforce the Data Processing Policy to prevent the disclosure of user data when it is transmitted between physically-separated parts of the TOE. 5.1.3.19 Basic internal TSF data transfer protection (FPT_ITT.1) 124 The TSF shall protect TSF data from disclosure when it is transmitted between separate parts of the TOE. 125 Refinement: The different memories, the CPU and other functional units of the TOE (e.g. a cryptographic co-processor) are seen as separated parts of the TOE. This requirement is equivalent to FDP_ITT.1 above but refers to TSF data instead of User Data. Therefore, it should be understood as to refer to the same Data Processing Policy. 126 SFP_2: Data Processing Policy User Data and TSF data shall not be accessible from the TOE except when the Smartcard Embedded Software decides to communicate the User Data via an external interface. The protection shall be applied to confidential data only but without the distinction of attributes controlled by the Smartcard Embedded Software. 5.1.3.20 Subset information flow control (FDP_IFC.1) 127 The TOE Security Functions shall enforce the Construction Flow Control Policy on all subjects defined in Section 5.1.1.1, the content of all objects defined in Section 5.1.1.2, and the commands available in OB.CMD_TST, OB.CMD_ISR and OB.CALL_USR objects. 5.1.3.21 Simple security attributes (FDP_IFF.1) 128 The TOE Security Functions shall enforce the Construction Flow Control Policy based on the following types of subject and information security attribute: - subject and object locations and TOE configuration. 129 The TOE Security Functions shall permit an information flow between a controlled subject and a controlled information via a controlled operation if the following rules hold: - Those in Table 16 of the ST19W Generic Security Target. 130 The TSF shall provide the additional information flow control SFP rules: None. 131 The TSF shall enforce the following additional SFP capabilities: Data Processing Policy. 132 The TSF shall explicitly authorise an information flow based on the following rules: None. 133 The TSF shall explicitly deny an information flow based on the following rules: None. 5.1.3.22 Subset residual information protection (FDP_RIP.1) 134 The TSF shall ensure that any previous information content of a resource is made unavailable upon the allocation of the resource to, deallocation of the resource from the following objects: OB.RAM objects and OB.REG objects but the illegal condition register and the CRC control register when in warm reset. 36/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.3.23 Quality metric for random numbers (FCS_RND.1) 135 The TSF shall provide a mechanism to generate random numbers that meet NIST FIPS PUB-140-2:1999 standard for a Security Level 3 cryptographic module (statistical test upon demand). 5.1.4 FUNCTIONAL REQUIREMENTS APPLICABLE TO USER CONFIGURATION 5.1.4.1 Cryptographic operation (FCS_COP.1) 136 The TSF shall perform the operations in Table 10 in accordance with a specified cryptographic algorithm in Table 10 and cryptographic key sizes of Table 10 that meet the standards in Table 10. Table 10 FCS_COP.1 iterations (cryptographic operations) [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] - encryption - decryption in Electronic Code Book (ECB) mode Data Encryption Standard (DES) 56 effective bits ISO 8372:1987 ISO 8731-1:1987 ISO/IEC 10116:1997 Triple Data Encryption Standard (3DES) 112 effective bits - encryption - decryption in Cipher Block Chaining (CBC) mode - compute a Message Authentication Code (MAC) Data Encryption Standard (DES) 56 effective bits ISO 8372:1987 ISO 8731-1:1987 ISO/IEC 9797:1994 ISO/IEC 10116:1997 Triple Data Encryption Standard (3DES) 112 effective bits - cipher - inverse cipher - key expansion operations Advanced Encryption Standard 128 bits NIST FIPS PUB 197 with block size of 128 bits and 10 rounds (AES-128 option) 37/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.1.4.2 Cryptographic key generation (FCS_CKM.1) 137 The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm, in Table 11, and specified cryptographic key sizes of Table 11 that meet the following standards in Table 11. - RSA recovery (encryption) Rivest, Shamir & Adleman’s multiples of 64 bits up to 1088 bits ISO/IEC 9796- 2:1997 MIT/LCS/TR-212 multiples of 64 bits larger than 1088 bits and up to 2176 bits - RSA signature (decryption) without the Chinese Remainder Theorem multiples of 64 bits up to 1088 bits - RSA signature (decryption) with the Chinese Remainder Theorem multiples of 64 bits larger than 1088 bits and up to 2176 bits - secure hash function revised Secure Hash Algorithm (SHA-1) this algorithm has no key, so the assignment is pointless1) Not applicable 1) result size of 160 bits on chained blocks of 512 bits Table 10 FCS_COP.1 iterations (cryptographic operations) [assignment: list of cryptographic operations] [assignment: cryptographic algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] 38/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 5.2 TOE SECURITY ASSURANCE REQUIREMENTS 138 The assurance requirements are EAL 5 augmented of additional assurance components listed in the following sections. 139 The components introduced by the PP/9806 and BSI-PP-002-2001 are hierarchical to the components specified in EAL 5. 140 The augmentations relative to EAL 5 are the following: - ALC_DVS.2 Sufficiency of security measures this increases the confidence in the vital area of developer security measures to the highest CC level, - AVA_MSU.3 Analysis and testing for insecure states this adds evaluator testing of the potential for misuse of the TOE within the evaluation scope, - AVA_VLA.4 Highly resistant this increases the attack potential assumed for the vulnerability analysis and penetration testing to its highest CC level. 141 Regarding application note 18 of BSI-PP-002-2001, the continuously increasing maturity level of evaluations of Smartcard ICs justifies the selection of a higher-level assurance package. Table 11 FCS_CKM.1 iterations (cryptographic key generation) Iteration label [assignment: cryptographic key generation algorithm] [assignment: cryptographic key sizes] [assignment: list of standards] [COP_RSA_RANDOM]1) 1) Note that this requirement is complementary to FCS_RND.1. The former asks for random numbers ready to use in a cipher scheme, as it is clearly recommended in paragraph n° 693 of CCIMB-2004-01-002, whereas the latter insists on the quality of the random source. random number generation 1088 bits Not applicable [COP_RSA_PRIMES] primes and RSA primes generation algorithm multiples of 64 bits up to 1088 bits NIST FIPS PUB-140- 2:1999 ISO/IEC 9796-2:1997 NIST FIPS PUB 186 JoCSS JoNT [COP_RSA_KEYS] RSA public and private keys computation algorithm multiples of 64 bits greater than 128 bits and up to 2176 bits NIST FIPS PUB-140- 2:1999 ISO/IEC 9796-2:1997 MIT/LCS/TR-212 39/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 142 The set of security assurance requirements (SARs) is presented in Table 12, indicating the origin of the requirement. 5.3 REFINEMENT OF THE SECURITY ASSURANCE REQUIREMENTS 143 As BSI-PP-002-2001 defines refinement for selected SARs, these refinements are also claimed in this security target. PP/9806 defines no refinement on SARs. 144 The main customizing is that the Dedicated Software is an operational part of the TOE after delivery, although the Test Dedicated Software is no more available. 145 Regarding application note 19 of BSI-PP-002-2001, the refinements for all the assurance families have been reviewed for the hierarchically higher-level assurance components selected in this security target. Table 12 TOE security assurance requirements Label Title Origin ACM_AUT.1 Partial CM automation EAL5/BSI-PP-002-2001/PP/9806 ACM_CAP.4 Generation support and acceptance procedures EAL5/BSI-PP-002-2001/PP/9806 ACM_SCP.3 Development tools CM coverage EAL5 ADO_DEL.2 Detection of modification EAL5/BSI-PP-002-2001/PP/9806 ADO_IGS.1 Installation, generation and start-up procedures EAL5/BSI-PP-002-2001/PP/9806 ADV_SPM.3 Formal security policy model EAL5 ADV_FSP.3 Semiformal functional specification EAL5 ADV_HLD.3 Semiformal high-level design EAL5 ADV_INT.1 Modularity EAL5 ADV_LLD.1 Descriptive low-level design EAL5/BSI-PP-002-2001/PP/9806 ADV_IMP.2 Implementation of the TSF EAL5/BSI-PP-002-2001/PP/9806 ADV_RCR.2 Semiformal correspondence demonstration EAL5 AGD_USR.1 User guidance EAL5/BSI-PP-002-2001/PP/9806 AGD_ADM.1 Administrator guidance EAL5/BSI-PP-002-2001/PP/9806 ALC_DVS.2 Sufficiency of security measures BSI-PP-002-2001/PP/9806 ALC_LCD.2 Standardised life-cycle model EAL5 ALC_TAT.2 Compliance with implementation standards EAL5 ATE_COV.2 Analysis of coverage EAL5/BSI-PP-002-2001/PP/9806 ATE_DPT.2 Testing: low-level design EAL5 ATE_FUN.1 Functional testing EAL5/BSI-PP-002-2001/PP/9806 ATE_IND.2 Independent testing - sample EAL5/BSI-PP-002-2001/PP/9806 AVA_VLA.4 Highly resistant BSI-PP-002-2001/PP/9806 AVA_CCA.1 Covert channel analysis EAL5 AVA_MSU.3 Analysis and testing for insecure states BSI-PP-002-2001 AVA_SOF.1 Strength of TOE security function evaluation EAL5/BSI-PP-002-2001/PP/9806 40/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 146 The text of the impacted refinements of BSI-PP-002-2001 is to be found in the ST19W Generic Security Target. 147 For reader’s ease, an impact summary is provided in Table 13. 5.4 SECURITY REQUIREMENTS FOR THE ENVIRONMENT 148 Although security requirements specified below are respectively applicable: - to the smart card embedded software for those in Section 5.4.1, - to the embedded software developer and the card manufacturer for those in Section 5.4.2, 149 it is neither necessary nor appropriate for this security target to define functional and assurance security requirements for the TOE environment1) . These are however included here to be conformant to the claimed protection profiles. 5.4.1 Security requirements for the operational IT environment 150 BSI-PP-002-2001 selects no security requirement for the IT operational environment. However, the extra functionality provided by the ST19WL34, introduced in this security target as recommended in AUG, results in the security requirements summarized in Table 14. 5.4.2 Security requirements for the Non-IT environment 151 The security requirements for the Non-IT environment selected in this security target, after BSI-PP-002-2001 and AUG are summarized in Table 15. Do remark that they are not evaluated. Only those after AUG are detailed hereafter. Table 13 Impact of EAL5 selection on BSI-PP-002-2001 refinements Assurance Family BSI-PP-002-2001 Level ST Level Impact on refinement ADO_DEL 2 2 None ALC_DVS 2 2 None ACM_SCP 2 3 None, refinement is still valid ACM_CAP 4 4 None ADV_FSP 2 3 Presentation style changes ATE_COV 2 2 Dedicated Software is included ADO_IGS 1 1 Difference on ISSUER or USER delivery AGD_USR 1 1 Terminal is not a direct user AGD_ADM 1 1 Difference on ISSUER or USER delivery 1 The TOE being a product-type TOE, dependencies on the environment should remain at the assumption and security objective levels because they are not in the scope of the evaluation (as a matter of fact, they will not be evaluated). Satisfaction of these requirements is a design issue for the smart card embedded software developer and a design/organizational issue for the card manufacturer. They should state and provide evidence on how they comply with these "safe conditions of use" of the product in order to claim, as element of evidence, the certification report of a TOE in a composite evaluation. Evaluators of the composite TOE should then evaluate and test this provided evidence. 41/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Table 14 Summary of security requirements for the operational IT environment Label Title Traces to… Origin Remark FDP_ITC.1 or FCS_CKM.1 Import of user data without security attributes Cryptographic key generation BSI.OE.Resp-Appl (FCS_COP.1) CCIMB-2004-01-002 ST19WL34’s FCS_CKM.1, Section 5.1.4.2 and FCS_COP.1, Section 5.1.4.1 can be used. FCS_CKM.4 Cryptographic key destruction FMT_MSA.2 Secure security attributes FCS_CKM.2 or FCS_COP.1 Cryptographic key distribution Cryptographic operation BSI.OE.Plat-Appl BSI.OE.Resp-Appl (FCS_CKM.1) FCS_CKM.4 Cryptographic key destruction FMT_MSA.2 Secure security attributes Table 15 Summary of security requirements for the non-IT environment Label Title Traces to… BSI.RE.Phase-1 Design & implementation of the smart card embedded software AUG1.A.Key-Function BSI.A.Plat-Appl BSI.A.Resp-APPL AUG1.P.Add Functions AUG4.T.Mem-Access BSI.T.Leak-Inherent BSI.T.Phys-Probing BSI.T.Phys-Manipulation BSI.T.Leak-Forced BSI.T.Abuse-Func BSI.T.RND (BSI.A.Process-Card) BSI.RE.Process-Card Protection during packaging, finishing and personalisation BSI.A.Process-Card AUG1.RE.Cipher Cipher schemes BSI.OE.Plat-Appl BSI.OE.Resp-Appl (FCS_COP.1, Section 5.1.4.1) (FCS_CKM.1, Section 5.1.4.2) 42/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 152 . 5.5 SECURITY REQUIREMENTS RATIONALE 153 The security requirements rationale has been established for the whole ST19W platform and has been presented and evaluated in the ST19W Generic Security Target. 154 For confidentiality reasons, this rationale is not reproduced here. AUG1.RE.Cipher Cipher Schemas The developers of Smartcard Embedded Software must not implement routines in a way which may compromise keys when the routines are executed as part of the Smartcard Embedded Software. Performing functions which access cryptographic keys could allow an attacker to misuse these functions to gather information about the key which is used in the computation of the function. Keys must be kept confidential as soon as they are generated. The keys must be unique with a very high probability, as well as cryptographically strong. For example, it must be ensured that it is not possible to derive the private key from a public key if asymmetric algorithms are used. If keys are imported into the TOE and/or derived from other keys, quality and confidentiality must be maintained. This implies that an appropriate key management has to be realised in the environment. 43/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 6 TOE SUMMARY SPECIFICATION 6.1 STATEMENT OF TOE SECURITY FUNCTIONS 155 The following security functions are an abstraction of the TOE Functional Specification. 6.1.1 SF_INIT_A: Hardware initialisation & TOE attribute initialisation 156 In TEST, ISSUER and USER configurations, this functionality ensures the following: - the TOE starts running in a secure state, - the TOE is securely initialised, - the reset operation is correctly managed. 6.1.2 SF_CONFIG_A: TOE configuration switching and control 157 In TEST, ISSUER and USER configurations, this functionality ensures the switching and the control of TOE configuration. 158 This functionality ensures that the TOE is either in TEST, ISSUER or USER configuration. 159 The only authorised TOE configuration modifications are: - TEST to ISSUER configuration by TEST administrator, - ISSUER to USER configuration by ISSUER administrator. 160 This functionality is responsible for the TOE configuration detection and notification to the other resources of the TOE. 6.1.3 SF_INT_A: TOE logical integrity 161 This functionality is responsible for the following operations, performed according to actual TOE configuration: - NVM, USR_ROM and ST_ROM integrity content verifications in TEST and ISSUER configurations, - valid CPU usage and stack overflow verification in TEST, ISSUER and USER configurations. - for correcting single bit fails upon a read operation, - other actions are not described here. 162 This functionality is responsible for reporting to SF_ADMINIS_A detected errors on CPU usage, stack overflow and EEPROM. 6.1.4 SF_TEST_A: Test of the TOE 163 This functionality is responsible for restricting access of the TOE TEST functionality to the TEST administrator in TEST configuration. 44/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 164 This functionality is responsible for restricting access of the TOE ISSUER functionality to the ISSUER administrator in ISSUER configuration. 165 In USER configuration, this functionality ensures that neither TOE TEST nor TOE ISSUER functionality can be accessed. 166 In TEST configuration, this functionality ensures the test of TOE functionality with respect to the IC specification. 167 In ISSUER and USER configurations, it ensures that critical test functionality is disabled. 168 In TEST configuration, this functionality provides commands to store data and/or pre- personalisation data and/or supplements of the Smartcard Embedded Software (personnalisation). In ISSUER configuration, these commands are still available but in a more restricted operation mode. 6.1.5 SF_AUTH_A: Administrators authentication 169 In TEST configuration, this SF ensures that the only allowed TOE user is an authenticated TEST administrator. 170 In ISSUER configuration, this SF ensures the authentication of the ISSUER administrator. 171 A SOF-high strength of function is claimed for this SF. 6.1.6 SF_FWL_A: Storage and Function Access Firewall 172 TOE memories are partitioned. This partitioning is partially defined by the TOE user and partially by STM: - ST_ROM mapping is STM defined, - USR_ROM mapping is user defined, - RAM and NVM mappings are partly STM defined and partly user defined. 173 In TEST, ISSUER and USER configurations, this security functionality monitors: - access from memory locations to other locations for ROM, RAM and NVM, - NVM use, - register access, and is responsible for the notification of violation attempts to SF_ADMINIS_A. 174 An access can be: - a read, to registers, ROM, RAM or NVM, - a write, to registers or RAM, - a program, to NVM, - an erase, to NVM. 175 Executability, Read, Write, Program and Erase right classes are defined by the user and STM for ROM, RAM and NVM. 45/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 6.1.7 SF_PHT_A: Physical tampering security function 176 In TEST, ISSUER and USER configurations, this functionality ensures the following: - the TOE detects clock and voltage supply operating changes by the environment, - the TOE detects attempts to violate its physical integrity, - the TOE is always clocked with shape and timing within specified operating conditions. 6.1.8 SF_ADMINIS_A: Security violation administrator 177 In TEST, ISSUER and USER configurations, this functionality ensures the management of security violations attempts. 178 The security violations attempts which are managed are: - access to unavailable or reserved memory locations, - unauthorised access to user memories, - unauthorised access to STM memories, - bad CPU usage, - bad NVM use, - EEPROM single bit fails, - clock and voltage supply operating changes, - TOE physical integrity abuse. 6.1.9 SF_OBS_A: Unobservability 179 In ISSUER and USER configurations, this security function addresses the Unobservability (FPR_UNO.1), the Basic internal transfer protection (FDP_ITT.1) and the Basic internal TSF data transfer protection (FPT_ITT.1) security functional requirements expressed in this document. 6.1.10 SF_SKCS_A: Symmetric Key Cryptography Support 180 In USER configuration, this security function implements the following standard symmetric key cryptography algorithms: - Data Encryption Standard (DES) with 64 bits long keys (56 effective bits). This functionality supports the following standard modes of operation, both for encryption and for decryption: - DES by itself, - Triple DES, chaining two DES encryption and one DES decryption. Each of these modes of operation can be chained in the standard Cipher Block Chaining mode (CBC). In the encryption operation mode, this function can compute either a 64 bits long Message Authentication Code (MAC) or the encrypted data. 46/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 181 This functionality implements the following standard symmetric key cryptography algorithms: - Advanced Encryption Standard (AES) with 128 bits long keys, 128 bits long blocks, 10 rounds, providing cipher, inverse cipher and key expansion operations. 6.1.11 SF_AKCS_A: Asymmetric Key Cryptography Support 182 In USER configuration, this security function implements the following standard asymmetric key cryptography algorithms: - RSA verification (encryption) with an RSA modulo up to 1088 bits, - RSA verification (encryption) with an RSA modulo up to 2176 bits, - RSA signature (decryption) without the Chinese Remainder Theorem (CRT), with an RSA modulo up to 1088 bits, - RSA signature (decryption) with the Chinese Remainder Theorem (CRT), with an RSA modulo up to 2176 bits, - RSA secret and public keys computation with an RSA modulo up to 2176 bits, - Prime number and RSA prime number generation up to 1088 bits, with Rabin- Miller primality tests. 183 In USER configuration, this security function implements the following standard hash function: - SHA-1 hash function chaining blocks of 512 bits to get a 160 bits result. 6.1.12 SF_ALEAS_A: Unpredictable Number Generation Support 184 In all configurations, this security function provides two unpredictable and unrelated 8 bits numbers. 185 In ISSUER and USER configurations, this security function supports the prevention of information leakage. 186 This security function ensures the generation of unpredictable numbers of 1088 bits, in USER configuration. 187 This security function can be qualified, according to the TOE claim, with the test metrics required by the NIST FIPS PUB-140-2:1999 standard for a Security Level 3 cryptographic module (statistical test upon demand)). 6.2 STATEMENT OF ASSURANCE MEASURES 188 The ST19WL34 Documentation Report (ST19WL34/WR66) shows the assurance measures, through a list of documents delivered, which are claimed to satisfy the stated assurance requirements. 47/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 7 PP CLAIMS 7.1 PP REFERENCES 189 The ST19WL34 Security Target is compliant with the requirements of the Smartcard Integrated Circuit Protection Profile PP/9806, Revision 2.0. 190 The ST19WL34 Security Target is compliant with the requirements of the Smartcard IC Platform Protection Profile BSI-PP-002-2001, Revision 1.0. 7.2 PP REFINEMENTS 191 The main refinements operated on the PP/9806 are: - "Smartcard product" is refined into "Secure IC based product" to emphasize the packaging independence of the TOE, - The product life-cycle is refined to include industrial parameters such as the delivery phase and the sites where the life-cycle processes are performed, - The SFR applicable to phase 3 are refined to be applicable to the logical phases TEST and ISSUER configurations. 192 PP/9806 refinements are indicated with type setting text as indicated here, original text being typeset as indicated here. Deleted parts are [as indicated here]. Text originating in AUG is typeset as indicated here. 193 The main refinements operated on the BSI-PP-002-2001 are: - The definition of "Test Features" in the Limited capabilities (FMT_LIM.1) policy, - Addition #1: “Support of Cipher Schemes” from AUG, - Addition #4: "Area based Memory Access Control" from AUG, - Refinement of assurance requirements. 194 BSI-PP-002-2001 refinements are indicated with type setting text as indicated here, original text being typeset as indicated here. Deleted parts are [as indicated here]. Text originating in AUG is typeset as indicated here. 7.3 PP ADDITIONS 195 The security environment additions relative to each PP are summarized in Table 3. Remind that most of them are redundant to each other but enable full traceability and rationale reuse. 196 The additional security objectives relative to each PP are summarized in Table 4. Remind that most of them are redundant to each other but enable full traceability and rationale reuse. 197 A simplified presentation of the TOE Security Policy (TSP) is added. 48/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 198 The additional SFRs for the TOE relative to each PP are summarized in Table 5. Remind that some of them are redundant to each other but enable full traceability and rationale reuse. 199 The additional SFRs for the environment relative to both PPs are summarized in Table 14 and Table 15. 200 The additional SARs relative to each PP are summarized in Table 12. 7.4 PP CLAIMS RATIONALE 201 The differences between this Security Target security objectives and requirements and those of PP/9806 and those of BSI-PP-002-2001, to both of which conformance is claimed, have been identified and justified in Chapter 4 and in Chapter 5. They have been recalled in the previous section. 202 The security objectives rationale referred to in Section 4.3 clearly identifies modifications and additions made to the rationale presented in the PP/9806 and in BSI-PP-002-2001. 203 Similarly, the security requirements rationale referred to in Section 5.5 has been consistently updated with respect to both protection profiles. 204 All PP requirements have been shown to be satisfied in the extended set of requirements whose completeness, consistency and soundness has been argued in the rationale sections of the ST19W Generic Security Target. 49/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 8 RATIONALE 205 The rationale has been established for the whole ST19W platform and has been presented and evaluated in the ST19W Generic Security Target. 206 For confidentiality reasons, the rationale is not reproduced here. 50/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET 9 REFERENCES 207 Protection Profile references 208 Generic Security Target reference 209 Target of Evaluation referenced documents 210 For security reasons, all these documents are classified and their applicable revisions are referenced in th ST19W Documentation Report. 211 Standards references Component description Reference Revision Smartcard Integrated Circuit PP/9806 2.0 Smartcard IC Platform BSI-PP-002-2001 1.0 Component description Reference ST19W Generic Security Target SCP_YQUEM_ST_03_001 Component description Reference ST19WL34 Documentation Report(ST19WL34/WR66) SMD_YQUEM_DR_05_002 Identifier Description BSI-AIS31 A proposal for Functionality classes and evaluation methodology for true (physical) random number generators, W. Killmann & W. Schindler BSI, Version 3.1, 25-09-2001 NIST FIPS PUB-140-2:1999 Security Requirements for Cryptographic Modules NIST FIPS PUB 180-1:1995 Secure Hash Standard NIST FIPS PUB 186 Recommended simplified Rabin-Miller primality tests for DSS NIST FIPS PUB 197 Advanced Encryption Standard (AES), November 2001 ISO 8372:1987 Information processing - Modes of operation for a 64-bit block cipher algorithm ISO 8731-1:1987 Banking - Approved algorithms for message authentication -Part 1: DEA ISO/IEC 9796-2:1997 Information technology - Security techniques - Digital signature scheme giving message recovery - Part 2: Mechanism using a hash function ISO/IEC 9797:1994 Information technology - Security techniques - Data integrity mechanism using a cryptographic check function employing a block cipher algorithm ISO/IEC 10116:1997 Information technology - Modes of operation of an n-bit block cipher algorithm ISO/IEC 10118-3:1998 Information technology - Security techniques - Hash functions - Part 3: Dedicated hash functions CCIMB-2004-01-001 Information technology - Security techniques - Evaluation criteria for IT security - Part 1: Introduction and general model, January 2004, version 2.2, revision 256 CCIMB-2004-01-002 Information technology - Security techniques - Evaluation criteria for IT security - Part 2: Security functional requirements, January 2004, version 2.2 51/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET CCIMB-2004-01-003 Information technology - Security techniques - Evaluation criteria for IT security - Part 3: Security assurance requirements, January 2004, version 2.2, revision 256 BSI_9806_0002_2001 Assessment on the substitution of an evaluation based on PP/9806 by an evaluation based on BSI-PP-0002-2001, BSI, version 1.1, May 2002 DCSSI_CCN.624 Fiche relative au profil de protection BSI-PP-0002-2001, C. Blad, version 1.1, 27 mai 2002 DCSSI_CCN.648 Fiche relative à l’utilisation du profile de protection BSI-PP-0002-2001 pour une évaluation PP/9911, DCSSI, 19 septembre 2002 AUG Smartcard Integrated Circuit Platform Augmentations, Atmel, Hitachi Europe, Infineon Technologies, Philips Semiconductors, Version 1.0, March 2002. MIT/LCS/TR-212 On digital signatures and public key cryptosystems, Rivest, Shamir & Adleman Technical report MIT/LCS/TR-212, MIT Laboratory for computer sciences, January 1979 JoCSS Riemann's hypothesis and tests for primality, Miller Journal of computer and system sciences, vol 13 n°3 p300-317 JoNT Probabilistic algorithm for testing primality, Miller Journal of number theory, vol 12 n°1 p 128-138 Identifier Description 52/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Annex A Glossary Authentication data Information used to verify the claimed identity of a user. Authorised user A user who may, in accordance with the TSP, perform an operation. Cryptographic sensitive data (CSD) User data appearing in plain text or otherwise unprotected form and whose disclosure or modification can compromise the security of a cryptographic module or the security of the information protected by the module. Differential Power Analysis (DPA) An analysis in variations of the electrical power consumption of a device, using advanced statistical methods and/or error correction techniques, for the purpose of extracting information correlated to secrets processed in the device. When several consumption traces are recombined during analysis to remove randomisation counter-measures, the analysis is known as Higher Order DPA (HODPA). Embedded software Software embedded in a secure IC may be located in any part of the nonvolatile memory (ROM and NVM) of the IC. Secure IC based product Packaged secure IC integrated in its end-usage carrier such as a Smartcard, a card reader, a set-top box, a PC board or any other suitable device. Integrated Circuit (IC) Electronic component(s) designed to perform processing and/or memory functions. IC Dedicated Software STM proprietary Dedicated SoftWare (DSW), embedded in ST_ROM, whose design is parameterised by the STM product assembly definition. This software contributes to the enforcement of the TSP. It also includes testing functionality and system libraries that are part of the API of the TOE; it is embedded in the IC (it is also known as IC firmware). IC developer Institution (or its agent) responsible for the IC development. 53/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET IC manufacturer Institution (or its agent) responsible for the IC manufacturing, testing, and pre- personalization. IC packaging manufacturer Institution (or its agent) responsible for the IC packaging and testing. IC pre-personalization data Any data that is stored in the nonvolatile memory for shipment between phases. Memory access Read and Modification (Write, Erase, Program) access. Object An entity within the TSC that contains or receives information and upon which subjects perform operations. Packaged IC IC embedded in a physical package such as micromodules, DIPs, SOICs or TQFPs. Personalizer Institution (or its agent) responsible for the secure IC based product personalization and final testing. Secret Information that must be known only to authorised users and/or the TSF in order to enforce a specific SFP. Secure IC Embedded SoftWare (SICESW) Embedded software in charge of generic functions of the secure IC such as Operating System, general routines and interpreters (secure IC basic software) and embedded software dedicated to the applications (secure IC application software). Secure IC embedded software developer Institution (or its agent) responsible for the secure IC embedded software development and the specification of IC pre-personalization requirements, if any. Security attribute Information associated with subjects, users and/or objects that is used for the enforcement of the TSP. Security derivation The process by which a TOE summary specification is derived from the identification of the threatened assets in the TOE environment, establishing in turn: a security environment, a set of security objectives, a set of security requirements and finally a set of security functions and assurance measures (see CC, part 1, section 4.3 for a detailed explanation, notably figure 4.5). 54/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Sensitive information Any information identified as a security relevant element of the TOE such as: – the application data of the TOE (such as IC pre-personalization requirements, IC and system specific data), – the secure IC embedded software, – the IC dedicated software, – the IC specification, design, development tools and technology. Simple Power Analysis (SPA) A direct analysis, primarily visual, of patterns of instruction execution (or execution of individual instructions), obtained through monitoring the variations in electrical power consumption of a device, for the purpose of revealing the features and implementations of (cryptographic) algorithms and subsequently the values of the secrets they process in the device. Smartcard A card according to ISO 7816 requirements which has a non volatile memory and a processing unit embedded within it. Software library Set of software functions provided by STM in the DSW that implement driving and functional services offered to the embedded software of the secure IC based product. Subject An entity within the TSC that causes operations to be performed. System integrator Institution (or its agent) responsible for the secure IC based product system integration (terminal software developer, system developer ...). TSF data Data created by and for the TOE, that might affect the operation of the TOE. User Any entity (human user or external IT entity) outside the TOE that interacts with the TOE. User data Data created by and for the user, that doesn’t affect the operation of the TOE. Warm reset Reset operation on the TOE without lowering power under the Power on Reset (POR) level. 55/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET Abbreviations ACC Accumulator register. AES Advanced Encryption Standard. AIS Application notes and Interpretation of the Scheme (BSI) ALU Arithmetical and Logical Unit. ANSI American National Standards Institute API Application Program Interface. BSI Bundesamt für Sicherheit in der Informationstechnik CC Common Criteria Version 2.2 (CCIMB). CCR Condition Code Register. CSD Cryptographic Sensitive Data. CSR Code Segment Register. CPU Central Processing Unit. DCSSI Direction Centrale de la Sécurité des Systèmes Informatique 56/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET DES Data Encryption Standard. DIP Dual-In-Line Package. DPA Differential Power Analysis. DSR Data Segment Register. DSW IC Proprietary Dedicated Software. EAL Evaluation Assurance Level. ECC Error Correcting Code. EEPROM Electrically Erasable Programmable Read Only Memory. EMA Electromagnetic Analysis. FIPS Federal Information Processing Standard. GPIO General Purpose Input Output. HODPA Higher Order Differential Power Analysis. I2C Inter Integrated Circuit bus. IART ISO-7816 Asynchronous Receiver Transmitter. IOCI Input Output and Control Interface. 57/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET ISO International Standards Organisation. IT Information Technology. Kbps Kilo bits per second. LPC Low Pin Count. MAP Modular Arithmetical Processor. NIST National Institute of Standards and Technology. NVM Non Volatile Memory. OP Operation Performed. OSP Organisational Security Policy. PC Program Counter register. PP Protection Profile. PUB Publication Series. RAM Random Access Memory. RF Radio Frequency. ROM Read Only Memory. 58/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET SAR Security Assurance Requirement. SF Security function. SFP Security Function Policy. SFR Security Functional Requirement. SICESW Secure IC Embedded SoftWare. SOF Strength of function. SOIC Small Outline IC. SP Stack Pointer register. SPA Simple Power Analysis. ST Security Target. ST_ROM STM reserved ROM. STM STMicroelectronics. TOE Target of Evaluation. TQFP Thin Quad Flat Package. TSC TSF Scope of Control. 59/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET TSF TOE Security Functions. TSFI TSF Interface. TST&ISR The logical phases TEST and ISSUER configurations. TSP TOE Security Policy. TSS TOE Summary Specification. RF-UART Radio Frequency Universal Asynchronous Receiver Transmitter. USR_ROM User reserved ROM. USB Universal Serial Bus. XIR X Index Register. YIR Y Index Register. 60/60 SMD_ST19WL34_ST_05_001_V01.02 ST19WL34 SECURITY TARGET CONFIDENTIALITY OBLIGATIONS: THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION. ITS DISTRIBUTION IS SUBJECT TO THE SIGNATURE OF AN NON-DISCLOSURE AGREEMENT (NDA). IT IS CLASSIFIED "PUBLIC" AT ALL TIMES YOU SHOULD COMPLY WITH THE FOLLOWING SECURITY RULES (REFER TO NDA FOR DETAILED OBLIGATIONS): DO NOT COPY OR REPRODUCE ALL OR PART OF THIS DOCUMENT KEEP THIS DOCUMENT LOCKED AWAY FURTHER COPIES CAN BE PROVIDED ON A “NEED TO KNOW BASIS”, PLEASE CONTACT YOUR LOCAL ST SALES OFFICE OR THE FOLLOWING ADDRESS: STMicroelectronics SA SMART CARDS PRODUCTS MARKETING DPT BP2 / ZI de Peynier Rousset / F-13106 ROUSSET Cedex / FRANCE Fax: +33 4 42 68 87 29 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is grant- ed by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are sub- ject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without the express written approval of STMicroelectronics. © 2005 STMicroelectronics - Printed in France - All Rights Reserved BULL CP8 Patents STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.