Page 1 of 92 Vision Series Network Packet Broker v5.3.0 Security Target Version 1.4 July 2020 Document prepared by www.lightshipsec.com Ixia, A Keysight Business Security Target Page 2 of 92 Document History Version Date Author Description 1.0 17 Apr 2020 L Turner Release for certification. 1.1 22 Apr 2020 M Kanasani Address lab observations. 1.2 22 June 2020 L Turner Publish for certification. 1.3 6 July 2020 L Turner Address certification observations. 1.4 20 Jul 2020 L Turner Update CAVP Ixia, A Keysight Business Security Target Page 3 of 92 Table of Contents 1 Introduction...........................................................................................................................5 1.1 Overview ........................................................................................................................5 1.2 Identification...................................................................................................................5 1.3 Conformance Claims......................................................................................................5 1.4 Terminology ...................................................................................................................7 2 TOE Description....................................................................................................................8 2.1 Type ...............................................................................................................................8 2.2 Usage.............................................................................................................................8 2.3 Security Functions..........................................................................................................9 2.4 Physical Scope.............................................................................................................10 2.5 Logical Scope...............................................................................................................12 3 Security Problem Definition...............................................................................................13 3.1 Threats.........................................................................................................................13 3.2 Assumptions.................................................................................................................14 3.3 Organizational Security Policies...................................................................................15 4 Security Objectives ............................................................................................................15 5 Security Requirements.......................................................................................................17 5.1 Conventions .................................................................................................................17 5.2 Extended Components Definition.................................................................................17 5.3 Functional Requirements .............................................................................................17 5.4 Assurance Requirements.............................................................................................32 6 TOE Summary Specification..............................................................................................33 6.1 Security Audit...............................................................................................................33 6.2 Cryptographic Support .................................................................................................33 6.3 Identification and Authentication ..................................................................................36 6.4 Security Management ..................................................................................................38 6.5 Protection of the TSF ...................................................................................................39 6.6 TOE Access .................................................................................................................41 6.7 Trusted Path/Channels ................................................................................................42 7 Rationale..............................................................................................................................43 7.1 Conformance Claim Rationale .....................................................................................43 7.2 Security Objectives Rationale ......................................................................................43 7.3 Security Requirements Rationale.................................................................................43 Annex A: Extended Components Definition.............................................................................46 Security Audit (FAU) .................................................................................................................46 Cryptographic Support (FCS) ...................................................................................................51 Identification and Authentication (FIA) ......................................................................................76 User Identification and Authentication (FIA_UIA_EXT) ............................................................77 User authentication (FIA_UAU_EXT) .......................................................................................78 Authentication using X.509 certificates (FIA_X509_EXT).........................................................79 Protection of the TSF (FPT)......................................................................................................82 Protection of Administrator Passwords (FPT_APW_EXT)........................................................83 TSF Self-Test (FPT_TST_EXT)................................................................................................84 Trusted Update (FPT_TUD_EXT).............................................................................................85 Time stamps (FPT_STM_EXT).................................................................................................89 TOE Access (FTA)....................................................................................................................90 Ixia, A Keysight Business Security Target Page 4 of 92 Communication (FCO) ..............................................................................................................91 List of Tables Table 1: Evaluation identifiers .........................................................................................................5 Table 2: NIAP Technical Decisions.................................................................................................5 Table 3: Terminology.......................................................................................................................7 Table 4: CAVP Certificates............................................................................................................10 Table 5: TOE models ....................................................................................................................10 Table 6: Threats ............................................................................................................................13 Table 7: Assumptions....................................................................................................................14 Table 8: Organizational Security Policies......................................................................................15 Table 9: Security Objectives for the Operational Environment......................................................15 Table 10: Summary of SFRs.........................................................................................................17 Table 11: Audit Events ..................................................................................................................19 Table 12: Assurance Requirements..............................................................................................32 Table 13: HMAC Characteristics...................................................................................................34 Table 14: Keys ..............................................................................................................................39 Table 15: Passwords.....................................................................................................................40 Table 16: NDcPP SFR Rationale ..................................................................................................43 Ixia, A Keysight Business Security Target Page 5 of 92 1 Introduction 1.1 Overview 1 This Security Target (ST) defines the Ixia, A Keysight Business Vision Series Network Packet Broker v5.3.0 Target of Evaluation (TOE) for the purposes of Common Criteria (CC) evaluation. 2 Ixia Network Packet Brokers are at the heart of all Ixia Visibility solutions. Their main function is to aggregate, load balance and filter network traffic before it’s processed by network security and performance monitoring tools. 1.2 Identification Table 1: Evaluation identifiers Target of Evaluation Ixia, A Keysight Business Vision Series Network Packet Broker v5.3.0 Build: 5.3.0.22 Security Target Ixia, A Keysight Business Vision Series Network Packet Broker v5.3.0 Security Target, v1.4 1.3 Conformance Claims 3 This ST supports the following conformance claims: a) CC version 3.1 revision 5 b) CC Part 2 extended c) CC Part 3 conformant d) collaborative Protection Profile for Network Devices, v2.1 e) NIAP Technical Decisions per Table 2 Table 2: NIAP Technical Decisions TD # Name Rationale if n/a TD0395 NIT Technical Decision for Different Handling of TLS1.1 and TLS1.2 FCS_TLSS_EXT.2 not claimed. TD0396 NIT Technical Decision for FCS_TLSC_EXT.1.1, Test 2 TD0397 NIT Technical Decision for Fixing AES-CTR Mode Tests TD0398 NIT Technical Decision for FCS_SSH*EXT.1.1 RFCs for AES-CTR SSH not claimed. TD0399 NIT Technical Decision for Manual installation of CRL (FIA_X509_EXT.2) TD0400 NIT Technical Decision for FCS_CKM.2 and elliptic curve-based key establishment Ixia, A Keysight Business Security Target Page 6 of 92 TD # Name Rationale if n/a TD0401 NIT Technical Decision for Reliance on external servers to meet SFRs TD0402 NIT Technical Decision for RSA-based FCS_CKM.2 Selection TD0407 NIT Technical Decision for handling Certification of Cloud Deployments TOE is not a cloud deployment. TD0408 NIT Technical Decision for local vs. remote administrator accounts TD0409 NIT decision for Applicability of FIA_AFL.1 to key-based SSH authentication SSH not claimed. TD0410 NIT technical decision for Redundant assurance activities associated with FAU_GEN.1 TD0411 NIT Technical Decision for FCS_SSHC_EXT.1.5, Test 1 – Server and client side seem to be confused SSH not claimed. TD0412 NIT Technical Decision for FCS_SSHS_EXT.1.5 SFR and AA discrepancy SSH not claimed. TD0423 NIT Technical Decision for Clarification about application of RfI#201726rev2 TD0424 NIT Technical Decision for NDcPP v2.1 Clarification – FCS_SSHC/S_EXT1.5 SSH not claimed. TD0425 NIT Technical Decision for Cut-and-paste Error for Guidance AA TD0447 NIT Technical Decision for Using ‘diffie-hellman-group- exchange-sha256’ in FCS_SSHC/S_EXT.1.7 SSH not claimed. TD0450 NIT Technical Decision for RSA-based ciphers and the Server Key Exchange message TD0451 NIT Technical Decision for ITT Comm UUID Reference Identifier TD0453 NIT Technical Decision for Clarify authentication methods SSH clients can use to authenticate SSH se SSH not claimed. TD0475 NIT Technical Decision for Separate traffic consideration for SSH rekey SSH not claimed. TD0477 NIT Technical Decision for Clarifying FPT_TUD_EXT.1 Trusted Update Ixia, A Keysight Business Security Target Page 7 of 92 TD # Name Rationale if n/a TD0478 NIT Technical Decision for Application Notes for FIA_X509_EXT.1 iterations TD0480 NIT Technical Decision for Granularity of audit events TD0481 NIT Technical Decision for FCS_(D)TLSC_EXT.X.2 IP addresses in reference identifiers TD0482 NIT Technical Decision for Identification of usage of cryptographic schemes TD0483 NIT Technical Decision for Applicability of FPT_APW_EXT.1 TD0484 NIT Technical Decision for Interactive sessions in FTA_SSL_EXT.1 & FTA_SSL.3 1.4 Terminology Table 3: Terminology Term Definition CC Common Criteria EAL Evaluation Assurance Level NDcPP collaborative Protection Profile for Network Devices NFV Network Functions Virtualization PP Protection Profile SDN Software-Defined Networking TOE Target of Evaluation TSF TOE Security Functionality RU Rack Unit CRC Cyclic Redundancy Check Ixia, A Keysight Business Security Target Page 8 of 92 2 TOE Description 2.1 Type 4 The TOE is a network device. 2.2 Usage 2.2.1 Deployment 5 Figure 1 shows an example deployment of the TOE (Network Packet Broker). Usage is as follows: a) Capture network traffic by tapping network links. b) Through non-production network links, traffic flows to the Network Packet Broker where duplicate data is removed and filtered. c) Performance and monitoring tools then receive the most appropriate data stream, tailored specifically for that tool. Figure 1: Example TOE deployment Ixia, A Keysight Business Security Target Page 9 of 92 2.2.2 Trusted Paths and Channels 6 The TOE’s trusted paths and channels within the scope of evaluation are shown in Figure 2. Figure 2: TOE Trusted Paths and Channels 7 The TOE trusted paths and channels are as follows: a) Serial Console. Administrative interface via direct serial connection. b) GUI/WebAPI. Administrative web GUI/WebAPI via HTTPS. c) Logs. Logs sent to syslog via TLS. d) NTP. NTP communications are make use of SHA-1 message digests. 2.3 Security Functions 8 The TOE provides the following security functions: a) Protected Communications. The TOE protects the integrity and confidentiality of communications as noted in section 2.2 above. b) Secure Administration. The TOE enables secure management of its security functions, including: i) Administrator authentication with passwords ii) Configurable password policies iii) Role Based Access Control iv) Access banners v) Management of critical security functions and data vi) Protection of cryptographic keys and passwords Ixia, A Keysight Business Security Target Page 10 of 92 c) Trusted Update. The TOE ensures the authenticity and integrity of software updates through digital signatures. d) System Monitoring. The TOE generates logs of security relevant events. The TOE stores logs locally and is capable of sending log events to a remote audit server. e) Self-Test. The TOE performs a suite of self-tests to ensure the correct operation and enforcement of its security functions. f) Cryptographic Operations. The TOE implements BouncyCastle and OpenSSL cryptographic modules. Relevant Cryptographic Algorithm Validation Program (CAVP) certificates are shown in Table 4. Table 4: CAVP Certificates Module Services Algorithms Certificates BouncyCastle TLS/HTTPS X.509v3 Key Encryption AES-CBC AES-GCM RSA KeyGen (186-4) RSA SigGen (186-4) RSA SigVer (186-4) ECDSA KeyGen (186-4) ECDSA SigGen (186-4) ECDSA SigVer (186-4) SHA-1, SHA-256 HMAC-SHA-1, HMAC-SHA-256 KAS-ECC Hash DRBG C1551 AES 5940 RSA 3118 ECDSA 1590 Component 2169 SHS 4693 HMAC 3915 KAS 210 DRBG 2493 OpenSSL NTP SHA-1 C1550 SHS 4692 2.4 Physical Scope 9 The physical boundary of the TOE includes the Vision Series Network Packet Broker v5.3.0 software on the appliance models shown in Table 5 which are delivered to the user via commercial carrier. Table 5: TOE models Model CPU Notes on differences Vision ONE Intel Core i7-3555LE 1RU - All-in-one tool that provides high- performance, lossless visibility Vision 7300/7303 Intel Core i7-3555LE 7RU - High-density, modular platform for high performance, intelligent visibility Ixia, A Keysight Business Security Target Page 11 of 92 Model CPU Notes on differences Vision E40 Atom C2538 1RU - Cost-effective rack-level visibility for ANY size data center Vision E100 Xeon D-1518 1RU - Cost-effective rack-level visibility for ANY size data center Vision E10S Celeron 3965U 1RU - Cost-effective rack-level visibility designed for branch and remote offices Vision X Xeon D-1527 3RU - Scalable visibility for data centres today and tomorrow TradeVision Intel Core i7-3555LE 1RU - Market feed management and tap aggregation for monitoring capital markets 2.4.1 Guidance Documents 10 The TOE includes the following guidance documents: a) Ixia, A Keysight Business Vision Series Network Packet Broker v5.3.0 Common Criteria Guide, v1.0 b) User Guides: i) Ixia Vision X User Guide v5.3.0, 913-2547-01 Rev B ii) Ixia Vision X Installation Guide, 913-2542-01 Rev A iii) Ixia Vision X Quick Start Guide, 913-2499-01 Rev-C iv) Ixia Vision 7300/7303 User Guide v5.3.0, 913-2548-01 Rev B v) Ixia Vision 7300/7303 Network Packet Broker Installation Guide v5.2.0, 913-2530-01 Rev A vi) Ixia Vision 7300/7303 Startup Guide, 913-2413-01 Rev A vii) Ixia Vision ONE Installation Guide, 913-2419-01 Rev B viii) Ixia Vision ONE User Guide v5.3.0, 913-2549-01 Rev B ix) Ixia Vision ONE Startup Guide, 913-2416-01 Rev B x) Ixia Vision Edge 40/100 Installation Guide, 913-2450-01 Rev A xi) Ixia Vision Edge 40/100 User Guide v5.3.0, 913-2550-01 Rev B xii) Ixia Vision E40 E100 Startup Guide, 913-2415-01 Rev A xiii) Ixia Vision Edge E10S User Guide v5.3.0, 913-2552-01 Rev B xiv) Ixia Vision Edge 10S Installation Guide, 913-2529-01 Rev A xv) Ixia TradeVision Installation Guide, 913-2421-01 Rev A xvi) Ixia TradeVision User Guide v5.3.0, 913-2565-01 Rev B xvii) Ixia TradeVision Quick Start Guide v5.3.0, 913-2563-01 Rev A Ixia, A Keysight Business Security Target Page 12 of 92 2.4.2 Non-TOE Components 11 The TOE operates with the following components in the environment: a) Audit Server. The TOE is capable of sending audit events to a Syslog server. b) NTP Server. The TOE synchronizes time with an NTP server. 2.5 Logical Scope 12 The logical scope of the TOE comprises the security functions defined in section 2.3. Ixia, A Keysight Business Security Target Page 13 of 92 3 Security Problem Definition 13 The Security Problem Definition is reproduced from section 4 of the NDcPP. 3.1 Threats Table 6: Threats Identifier Description T.UNAUTHORIZED_ ADMINISTRATOR_ ACCESS Threat agents may attempt to gain Administrator access to the network device by nefarious means such as masquerading as an Administrator to the device, masquerading as the device to an Administrator, replaying an administrative session (in its entirety, or selected portions), or performing man-in-the-middle attacks, which would provide access to the administrative session, or sessions between network devices. Successfully gaining Administrator access allows malicious actions that compromise the security functionality of the device and the network on which it resides. T.WEAK_ CRYPTOGRAPHY Threat agents may exploit weak cryptographic algorithms or perform a cryptographic exhaust against the key space. Poorly chosen encryption algorithms, modes, and key sizes will allow attackers to compromise the algorithms, or brute force exhaust the key space and give them unauthorized access allowing them to read, manipulate and/or control the traffic with minimal effort. T.UNTRUSTED_ COMMUNICATION_ CHANNELS Threat agents may attempt to target network devices that do not use standardized secure tunnelling protocols to protect the critical network traffic. Attackers may take advantage of poorly designed protocols or poor key management to successfully perform man-in-the-middle attacks, replay attacks, etc. Successful attacks will result in loss of confidentiality and integrity of the critical network traffic, and potentially could lead to a compromise of the network device itself. T.WEAK_ AUTHENTICATION_ ENDPOINTS Threat agents may take advantage of secure protocols that use weak methods to authenticate the endpoints – e.g. a shared password that is guessable or transported as plaintext. The consequences are the same as a poorly designed protocol, the attacker could masquerade as the Administrator or another device, and the attacker could insert themselves into the network stream and perform a man-in-the-middle attack. The result is the critical network traffic is exposed and there could be a loss of confidentiality and integrity, and potentially the network device itself could be compromised. T.UPDATE_ COMPROMISE Threat agents may attempt to provide a compromised update of the software or firmware which undermines the security functionality of the device. Non-validated updates or updates validated using non-secure or weak cryptography leave the update firmware vulnerable to surreptitious alteration. T.UNDETECTED_ ACTIVITY Threat agents may attempt to access, change, and/or modify the security functionality of the network device without Administrator awareness. This could result in the attacker finding an avenue (e.g., misconfiguration, flaw in the product) to compromise the device and Ixia, A Keysight Business Security Target Page 14 of 92 Identifier Description the Administrator would have no knowledge that the device has been compromised. T.SECURITY_ FUNCTIONALITY_ COMPROMISE Threat agents may compromise credentials and device data enabling continued access to the network device and its critical data. The compromise of credentials includes replacing existing credentials with an attacker’s credentials, modifying existing credentials, or obtaining the Administrator or device credentials for use by the attacker. T.PASSWORD_ CRACKING Threat agents may be able to take advantage of weak administrative passwords to gain privileged access to the device. Having privileged access to the device provides the attacker unfettered access to the network traffic, and may allow them to take advantage of any trust relationships with other network devices. T.SECURITY_ FUNCTIONALITY_ FAILURE An external, unauthorized entity could make use of failed or compromised security functionality and might therefore subsequently use or abuse security functions without prior authentication to access, change or modify device data, critical network traffic or security functionality of the device. 3.2 Assumptions Table 7: Assumptions Identifier Description A.PHYSICAL_ PROTECTION The network device is assumed to be physically protected in its operational environment and not subject to physical attacks that compromise the security and/or interfere with the device’s physical interconnections and correct operation. This protection is assumed to be sufficient to protect the device and the data it contains. As a result, the cPP will not include any requirements on physical tamper protection or other physical attack mitigations. The cPP will not expect the product to defend against physical access to the device that allows unauthorized entities to extract data, bypass other controls, or otherwise manipulate the device. A.LIMITED_ FUNCTIONALITY The device is assumed to provide networking functionality as its core function and not provide functionality/services that could be deemed as general purpose computing. For example, the device should not provide a computing platform for general purpose applications (unrelated to networking functionality). A.NO_THRU_ TRAFFIC_ PROTECTION A standard/generic network device does not provide any assurance regarding the protection of traffic that traverses it. The intent is for the network device to protect data that originates on or is destined to the device itself, to include administrative data and audit data. Traffic that is traversing the network device, destined for another network entity, is not covered by the NDcPP. It is assumed that this protection will be covered by cPPs for particular types of network devices (e.g., firewall). Ixia, A Keysight Business Security Target Page 15 of 92 Identifier Description A.TRUSTED_ ADMINISTRATOR The Security Administrator(s) for the network device are assumed to be trusted and to act in the best interest of security for the organization. This includes being appropriately trained, following policy, and adhering to guidance documentation. Administrators are trusted to ensure passwords/credentials have sufficient strength and entropy and to lack malicious intent when administering the device. The network device is not expected to be capable of defending against a malicious Administrator that actively works to bypass or compromise the security of the device. A.REGULAR_ UPDATES The network device firmware and software is assumed to be updated by an Administrator on a regular basis in response to the release of product updates due to known vulnerabilities. A.ADMIN_ CREDENTIALS_ SECURE The Administrator’s credentials (private key) used to access the network device are protected by the platform on which they reside. A.RESIDUAL_ INFORMATION The Administrator must ensure that there is no unauthorized access possible for sensitive residual information (e.g. cryptographic keys, keying material, PINs, passwords etc.) on networking equipment when the equipment is discarded or removed from its operational environment. 3.3 Organizational Security Policies Table 8: Organizational Security Policies Identifier Description P.ACCESS_BANNER The TOE shall display an initial banner describing restrictions of use, legal agreements, or any other appropriate information to which users consent by accessing the TOE. 4 Security Objectives 14 The security objectives are reproduced from section 5 of the NDcPP. Table 9: Security Objectives for the Operational Environment Identifier Description OE.PHYSICAL Physical security, commensurate with the value of the TOE and the data it contains, is provided by the environment. OE.NO_GENERAL_ PURPOSE There are no general-purpose computing capabilities (e.g., compilers or user applications) available on the TOE, other than those services necessary for the operation, administration and support of the TOE. Ixia, A Keysight Business Security Target Page 16 of 92 Identifier Description OE.NO_THRU_ TRAFFIC_ PROTECTION The TOE does not provide any protection of traffic that traverses it. It is assumed that protection of this traffic will be covered by other security and assurance measures in the operational environment. OE.TRUSTED_ADMIN Security Administrators are trusted to follow and apply all guidance documentation in a trusted manner. OE.UPDATES The TOE firmware and software is updated by an Administrator on a regular basis in response to the release of product updates due to known vulnerabilities. OE.ADMIN_CREDEN TIALS_SECURE The Administrator’s credentials (private key) used to access the TOE must be protected on any other platform on which they reside. OE.RESIDUAL_INFO RMATION The Security Administrator ensures that there is no unauthorized access possible for sensitive residual information (e.g. cryptographic keys, keying material, PINs, passwords etc.) on networking equipment when the equipment is discarded or removed from its operational environment. Ixia, A Keysight Business Security Target Page 17 of 92 5 Security Requirements 5.1 Conventions 15 This document uses the following font conventions to identify the operations defined by the CC: a) Assignment. Indicated with italicized text. b) Refinement. Indicated with bold text and strikethroughs. c) Selection. Indicated with underlined text. d) Assignment within a Selection: Indicated with italicized and underlined text. e) Iteration. Indicated by adding a string starting with “/” (e.g. “FCS_COP.1/Hash”). 16 Note: Operations performed within the Security Target are denoted within brackets []. Operations shown without brackets are reproduced from the NDcPP. 5.2 Extended Components Definition 17 Refer to Annex A: Extended Components Definition. 5.3 Functional Requirements Table 10: Summary of SFRs Requirement Title FAU_GEN.1 Audit Data Generation FAU_GEN.2 User Identity Association FAU_STG_EXT.1 Protected Audit Event Storage FCS_CKM.1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_CKM.4 Cryptographic Key Destruction FCS_COP.1/DataEncryption Cryptographic Operation (AES Data Encryption/Decryption) FCS_COP.1/SigGen Cryptographic Operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic Operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic Operation (Keyed Hash Algorithm) FCS_HTTPS_EXT.1 HTTPS Protocol FCS_NTP_EXT.1 NTP Protocol Ixia, A Keysight Business Security Target Page 18 of 92 Requirement Title FCS_RBG_EXT.1 Random Bit Generation FCS_TLSC_EXT.2 TLS Client Protocol FCS_TLSS_EXT.1 TLS Server Protocol FIA_AFL.1 Authentication Failure Management FIA_PMG_EXT.1 Password Management FIA_UIA_EXT.1 User Identification and Authentication FIA_UAU_EXT.2 Password-based Authentication Mechanism FIA_UAU.7 Protected Authentication Feedback FIA_X509_EXT.1/Rev X.509 Certificate Validation FIA_X509_EXT.2 X.509 Certificate Authentication FIA_X509_EXT.3 X.509 Certificate Requests FMT_MOF.1/ManualUpdate Management of security functions behaviour FMT_MOF.1/Functions Management of security functions behaviour FMT_MTD.1/CoreData Management of TSF Data FMT_MTD.1/CryptoKeys Management of TSF Data FMT_SMF.1 Specification of Management Functions FMT_SMR.2 Restrictions on Security Roles FPT_SKP_EXT.1 Protection of TSF Data (for reading of all pre-shared, symmetric and private keys) FPT_APW_EXT.1 Protection of Administrator Passwords FPT_TST_EXT.1 TSF testing FPT_TUD_EXT.1 Extended: Trusted update FPT_STM_EXT.1 Reliable Time Stamps FTA_SSL_EXT.1 TSF-initiated Session Locking FTA_SSL.3 TSF-initiated Termination FTA_SSL.4 User-initiated Termination Ixia, A Keysight Business Security Target Page 19 of 92 Requirement Title FTA_TAB.1 Default TOE Access Banners FTP_ITC.1 Inter-TSF trusted channel FTP_TRP.1/Admin Trusted Path 5.3.1 Security Audit (FAU) FAU_GEN.1 Audit Data Generation FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events: a) Start-up and shutdown of the audit functions; b) All auditable events for the not specified level of audit; c) All administrative actions comprising: o Administrative login and logout (name of user account shall be logged if individual user accounts are required for Administrators). o Changes to TSF data related to configuration changes (in addition to the information that a change occurred it shall be logged what has been changed). o Generating/import of, changing, or deleting of cryptographic keys (in addition to the action itself a unique key name or key reference shall be logged). o Resetting passwords (name of related user account shall be logged). o no other actions; d) Specifically defined auditable events listed in Table 2 Table 11. Table 11: Audit Events Requirement Auditable Events Additional Audit Record Contents FAU_GEN.1 None. None. FAU_GEN.2 None. None. FAU_STG_EXT.1 None. None. FCS_CKM.1 None. None. FCS_CKM.2 None. None. FCS_CKM.4 None. None. Ixia, A Keysight Business Security Target Page 20 of 92 Requirement Auditable Events Additional Audit Record Contents FCS_COP.1/DataEncryption None. None. FCS_COP.1/SigGen None. None. FCS_COP.1/Hash None. None. FCS_COP.1/KeyedHash None. None. FCS_HTTPS_EXT.1 Failure to establish a HTTPS Session. Reason for failure FCS_NTP_EXT.1 Configuration of a new time server Removal of configured time server Identity if new/removed time server FCS_RBG_EXT.1 None. None. FCS_TLSC_EXT.1 Failure to establish a TLS Session Reason for failure FCS_TLSS_EXT.1 Failure to establish a TLS Session Reason for failure FIA_AFL.1 Unsuccessful login attempts limit is met or exceeded. Origin of the attempt (e.g., IP address). FIA_PMG_EXT.1 None. None. FIA_UIA_EXT.1 All use of identification and authentication mechanism. Provided user identity, origin of the attempt (e.g., IP address). FIA_UAU_EXT.2 All use of identification and authentication mechanism. Origin of the attempt (e.g., IP address). FIA_UAU.7 None. None. FIA_X509_EXT.1/Rev Unsuccessful attempt to validate a certificate Reason for failure FIA_X509_EXT.2 None. None. FIA_X509_EXT.3 None. None. FMT_MOF.1/ManualUpdate Any attempt to initiate a manual update None. FMT_MOF.1/Functions Modification of the behaviour of the transmission of audit None. Ixia, A Keysight Business Security Target Page 21 of 92 Requirement Auditable Events Additional Audit Record Contents data to an external IT entity, the handling of audit data, the audit functionality when Local Audit Storage Space is full. FMT_MTD.1/CoreData None. None. FMT_MTD.1/CryptoKeys None. None. FMT_SMF.1 All management activities of TSF data. None. FMT_SMR.2 None. None. FPT_SKP_EXT.1 None. None. FPT_APW_EXT.1 None. None. FPT_TST_EXT.1 None. None. FPT_TUD_EXT.1 Initiation of update; result of the update attempt (success or failure) None. FPT_STM_EXT.1 Discontinuous changes to time - either Administrator actuated or changed via an automated process. (Note that no continuous changes to time need to be logged. See also application note on FPT_STM_EXT.1) For discontinuous changes to time: The old and new values for the time. Origin of the attempt to change time for success and failure (e.g., IP address). FTA_SSL_EXT.1 (if “terminate the session” is selected) The termination of a local session by the session locking mechanism. None. FTA_SSL.3 The termination of a remote session by the session locking mechanism. None. FTA_SSL.4 The termination of an interactive session. None. FTA_TAB.1 None. None. FTP_ITC.1 Initiation of the trusted channel. Termination of the trusted channel. Failure of the trusted channel functions. Identification of the initiator and target of failed trusted channels establishment attempt. Ixia, A Keysight Business Security Target Page 22 of 92 Requirement Auditable Events Additional Audit Record Contents FTP_TRP.1/Admin Initiation of the trusted path. Termination of the trusted path. Failure of the trusted path functions. None. FAU_GEN.1.2 The TSF shall record within each audit record at least the following information: a) Date and time of the event, type of event, subject identity, and the outcome (success or failure) of the event; and b) For each audit event type, based on the auditable event definitions of the functional components included in the cPP/ST, information specified in column three of Table 2 Table 11. FAU_GEN.2 User Identity Association FAU_GEN.2.1 For audit events resulting from actions of identified users, the TSF shall be able to associate each auditable event with the identity of the user that caused the event. FAU_STG_EXT.1 Protected Audit Event Storage FAU_STG_EXT.1.1 The TSF shall be able to transmit the generated audit data to an external IT entity using a trusted channel according to FTP_ITC.1. FAU_STG_EXT.1.2 The TSF shall be able to store generated audit data on the TOE itself.[ • TOE shall consist of a single standalone component that stores audit data locally] FAU_STG_EXT.1.3 The TSF shall [overwrite previous audit records according to the following rule: [delete the oldest 1 MB of local audit data] when the local storage space for audit data is full. 5.3.2 Cryptographic Support (FCS) FCS_CKM.1 Cryptographic Key Generation FCS_CKM.1.1 The TSF shall generate asymmetric cryptographic keys in accordance with a specified cryptographic key generation algorithm: [ • RSA schemes using cryptographic key sizes of 2048-bit or greater that meet the following: FIPS PUB 186-4, “Digital Signature Standard (DSS)”, Appendix B.3; • ECC schemes using “NIST curves” [P-256, P-384, P-521] that meet the following: FIPS PUB 186-4, “Digital Signature Standard (DSS)”, Appendix B.4; Ixia, A Keysight Business Security Target Page 23 of 92 ]and specified cryptographic key sizes [assignment: cryptographic key sizes] that meet the following: [assignment: list of standards]. FCS_CKM.2 Cryptographic Key Establishment FCS_CKM.2.1 The TSF shall perform cryptographic key establishment in accordance with a specified cryptographic key establishment method: [ • Elliptic curve-based key establishment schemes that meet the following: NIST Special Publication 800-56A Revision 2, “Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography”; ] that meets the following: [assignment: list of standards]. FCS_CKM.4 Cryptographic Key Destruction FCS_CKM.4.1 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method [ • For plaintext keys in volatile storage, the destruction shall be executed by a [destruction of reference to the key directly followed by a request for garbage collection]; • For plaintext keys in non-volatile storage, the destruction shall be executed by the invocation of an interface provided by a part of the TSF that [ o logically addresses the storage location of the key and performs a [single overwrite consisting of [a new value of the key]]; ] that meets the following: No Standard. FCS_COP.1/DataEncryption Cryptographic Operation (AES Data Encryption/Decryption) FCS_COP.1.1/DataEncryption The TSF shall perform encryption/decryption in accordance with a specified cryptographic algorithm AES used in [CBC, GCM] mode and cryptographic key sizes [128 bits, 256 bits] that meet the following: AES as specified in ISO 18033-3, [CBC as specified in ISO 10116, GCM as specified in ISO 19772]. FCS_COP.1/SigGen Cryptographic Operation (Signature Generation and Verification) FCS_COP.1.1/SigGen The TSF shall perform cryptographic signature services (generation and verification) in accordance with a specified cryptographic algorithm [ • RSA Digital Signature Algorithm and cryptographic key sizes (modulus) [2048 bits or greater], ] that meet the following: [ • For RSA schemes: FIPS PUB 186-4, “Digital Signature Standard (DSS)”, Section 5.5, using PKCS #1 v2.1 Signature Schemes Ixia, A Keysight Business Security Target Page 24 of 92 RSASSA-PSS and/or RSASSA-PKCS1v1_5; ISO/IEC 9796-2, Digital signature scheme 2 or Digital Signature scheme 3,] FCS_COP.1/Hash Cryptographic Operation (Hash Algorithm) FCS_COP.1.1/Hash The TSF shall perform cryptographic hashing services in accordance with a specified cryptographic algorithm [SHA-1, SHA-256] and cryptographic key sizes [assignment: cryptographic key sizes] and message digest sizes [160, 256] bits that meet the following: ISO/IEC 10118-3:2004. FCS_COP.1/KeyedHash Cryptographic Operation (Keyed Hash Algorithm) FCS_COP.1.1/KeyedHash The TSF shall perform keyed-hash message authentication in accordance with a specified cryptographic algorithm [HMAC-SHA-1, HMAC-SHA-256] and cryptographic key sizes [160, 256] and message digest sizes [160, 256] bits that meet the following: ISO/IEC 9797- 2:2011, Section 7 “MAC Algorithm 2”. FCS_HTTPS_EXT.1 HTTPS Protocol FCS_HTTPS_EXT.1.1 The TSF shall implement the HTTPS protocol that complies with RFC 2818. FCS_HTTPS_EXT.1.2 The TSF shall implement HTTPS using TLS. FCS_HTTPS_EXT.1.3 If a peer certificate is presented, the TSF shall [not require client authentication] if the peer certificate is deemed invalid. FCS_NTP_EXT.1 NTP Protocol FCS_NTP_EXT.1.1 The TSF shall use only the following NTP version(s) [NTP v4 (RFC 5905)]. FCS_NTP_EXT.1.2 The TSF shall update its system time using [Authentication using [SHA1] as the message digest algorithm(s)]. FCS_NTP_EXT.1.3 The TSF shall not update NTP timestamp from broadcast and/or multicast addresses. FCS_NTP_EXT.1.4 The TSF shall support configuration of at least three (3) NTP time sources. FCS_RBG_EXT.1 Random Bit Generation FCS_RBG_EXT.1.1 The TSF shall perform all deterministic random bit generation services in accordance with ISO/IEC 18031:2011 using [Hash_DRBG (any)]. FCS_RBG_EXT.1.2 The deterministic RBG shall be seeded by at least one entropy source that accumulates entropy from [[one] hardware based noise source] with a minimum of [256 bits] of entropy at least equal to the greatest security Ixia, A Keysight Business Security Target Page 25 of 92 strength, according to ISO/IEC 18031:2011 Table C.1 “Security Strength Table for Hash Functions”, of the keys and hashes that it will generate. FCS_TLSC_EXT.2 TLS Client Protocol FCS_TLSC_EXT.2.1 The TSF shall implement [TLS 1.2 (RFC 5246)] and reject all other TLS and SSL versions. The TLS implementation will support the following ciphersuites: [ • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 as defined in RFC 5289 • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5289 • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 4492]. FCS_TLSC_EXT.2.2 The TSF shall verify that the presented identifiers of the following types: [identifiers defined in RFC 6125] are matched to reference identifiers. FCS_TLSC_EXT.2.3 The TSF shall only establish a trusted channel if the server certificate is valid. If the server certificate is deemed invalid, then the TSF shall [not establish the connection]. FCS_TLSC_EXT.2.4 The TSF shall [present the Supported Elliptic Curves Extension with the following NIST curves: [secp256r1, secp384r1, secp521r1] and no other curves] in the Client Hello. FCS_TLSS_EXT.1 TLS Server Protocol with mutual authentication FCS_TLSS_EXT.1.1 The TSF shall implement [TLS 1.2 (RFC 5246)] and reject all other TLS and SSL versions. The TLS implementation will support the following ciphersuites:[ • TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 as defined in RFC 5289 • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5289 • TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 4492]. FCS_TLSS_EXT.1.2 The TSF shall deny connections from clients requesting SSL 2.0, SSL 3.0, TLS 1.0 and [TLS 1.1]. FCS_TLSS_EXT.1.3 The TSF shall [generate EC Diffie-Hellman parameters over NIST curves [secp256r1, secp384r1, secp521r1] and no other curves]. 5.3.3 Identification and Authentication (FIA) FIA_AFL.1 Authentication Failure Management Ixia, A Keysight Business Security Target Page 26 of 92 FIA_AFL.1.1 The TSF shall detect when an Administrator configurable positive integer within [3] unsuccessful authentication attempts occur related to Administrators attempting to authenticate remotely using a password. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been met, the TSF shall [prevent the offending remote Administrator from successfully authenticating until [unlock the user] is taken by a local Administrator;]. Application Note: The above SFR is altered by TD0408. FIA_PMG_EXT.1 Password Management FIA_PMG_EXT.1.1 The TSF shall provide the following password management capabilities for administrative passwords: a) Passwords shall be able to be composed of any combination of upper and lower case letters, numbers, and the following special characters: [[“!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”, [“`”, ”~”, ”_”, ”+”, ”-“, ”=”, ”{“, ”}”, “|”, “\”, “:”, “””, ”;”, ”’”, “<”, “>”, “?”, “,”, “.”, “/”, “[”, ”]”]; b) Minimum password length shall be configurable to between [15] and [100] characters. FIA_UIA_EXT.1 User Identification and Authentication FIA_UIA_EXT.1.1 The TSF shall allow the following actions prior to requiring the non-TOE entity to initiate the identification and authentication process: • Display the warning banner in accordance with FTA_TAB.1; • [[access to help files (PDF and html format) • view alarm notifications • view software version number]] FIA_UIA_EXT.1.2 The TSF shall require each administrative user to be successfully identified and authenticated before allowing any other TSF-mediated actions on behalf of that administrative user. FIA_UAU_EXT.2 Password-based Authentication Mechanism FIA_UAU_EXT.2.1 The TSF shall provide a local [password-based] authentication mechanism to perform local administrative user authentication. Application Note: The above SFR is altered by TD0408. FIA_UAU.7 Protected Authentication Feedback FIA_UAU.7.1 The TSF shall provide only obscured feedback to the administrative user while the authentication is in progress at the local console. FIA_X509_EXT.1/Rev X.509 Certificate Validation Ixia, A Keysight Business Security Target Page 27 of 92 FIA_X509_EXT.1.1/Rev The TSF shall validate certificates in accordance with the following rules: • RFC 5280 certificate validation and certification path validation supporting a minimum path length of three certificates. • The certification path must terminate with a trusted CA certificate designated as a trust anchor. • The TSF shall validate a certification path by ensuring that all CA certificates in the certification path contain the presence of the basicConstraints extension and that the CA flag is set to TRUE. • The TSF shall validate the revocation status of the certificate using [a Certificate Revocation List (CRL) as specified in RFC 5280 Section 6.3] • The TSF shall validate the extendedKeyUsage field according to the following rules: o Certificates used for trusted updates and executable code integrity verification shall have the Code Signing purpose (id- kp 3 with OID 1.3.6.1.5.5.7.3.3) in the extendedKeyUsage field. o Server certificates presented for TLS shall have the Server Authentication purpose (id-kp 1 with OID 1.3.6.1.5.5.7.3.1) in the extendedKeyUsage field. o Client certificates presented for TLS shall have the Client Authentication purpose (id-kp 2 with OID 1.3.6.1.5.5.7.3.2) in the extendedKeyUsage field. o OCSP certificates presented for OCSP responses shall have the OCSP Signing purpose (id-kp 9 with OID 1.3.6.1.5.5.7.3.9) in the extendedKeyUsage field. FIA_X509_EXT.1.2/Rev The TSF shall only treat a certificate as a CA certificate if the basicConstraints extension is present and the CA flag is set to TRUE. FIA_X509_EXT.2 X.509 Certificate Authentication FIA_X509_EXT.2.1 The TSF shall use X.509v3 certificates as defined by RFC 5280 to support authentication for [HTTPS, TLS], and [no additional uses]. FIA_X509_EXT.2.2 When the TSF cannot establish a connection to determine the validity of a certificate, the TSF shall [not accept the certificate]. FIA_X509_EXT.3 X.509 Certificate Requests FIA_X509_EXT.3.1 The TSF shall generate a Certificate Request Message as specified by RFC 2986 and be able to provide the following information in the request: public key and [Common Name, Organization, Organizational Unit, Country]. FIA_X509_EXT.3.2 The TSF shall validate the chain of certificates from the Root CA upon receiving the CA Certificate Response. Ixia, A Keysight Business Security Target Page 28 of 92 5.3.4 Security Management (FMT) FMT_MOF.1/ManualUpdate Management of security functions behaviour FMT_MOF.1.1/ManualUpdate The TSF shall restrict the ability to enable the functions to perform manual updates to Security Administrators. FMT_MOF.1/Functions Management of security functions behaviour FMT_MOF.1.1/Functions The TSF shall restrict the ability to [modify the behaviour of] the functions [transmission of audit data to an external IT entity] to Security Administrators. FMT_MTD.1/CoreData Management of TSF Data FMT_MTD.1.1/CoreData The TSF shall restrict the ability to manage the TSF data to Security Administrators. FMT_MTD.1/CryptoKeys Management of TSF data FMT_MTD.1.1/CryptoKeys The TSF shall restrict the ability to manage the cryptographic keys to Security Administrators. FMT_SMF.1 Specification of Management Functions FMT_SMF.1.1 The TSF shall be capable of performing the following management functions: • Ability to administer the TOE locally and remotely; • Ability to configure the access banner; • Ability to configure the session inactivity time before session termination or locking; • Ability to update the TOE, and to verify the updates using [digital signature] capability prior to installing those updates; • Ability to configure the authentication failure parameters for FIA_AFL.1; • [ o Ability to configure audit behaviour; o Ability to manage the cryptographic keys; o Ability to configure NTP; o Ability to manage the TOE's trust store and designate X509.v3 certificates as trust anchors; o Ability to import X.509v3 certificates to the TOE's trust store;] FMT_SMR.2 Restrictions on Security Roles Ixia, A Keysight Business Security Target Page 29 of 92 FMT_SMR.2.1 The TSF shall maintain the roles: • Security Administrator. FMT_SMR.2.2 The TSF shall be able to associate users with roles. FMT_SMR.2.3 The TSF shall ensure that the conditions • The Security Administrator role shall be able to administer the TOE locally; • The Security Administrator role shall be able to administer the TOE remotely are satisfied. 5.3.5 Protection of the TSF (FPT) FPT_SKP_EXT.1 Protection of TSF Data (for reading of all pre-shared, symmetric and private keys) FPT_SKP_EXT.1.1 The TSF shall prevent reading of all pre-shared keys, symmetric keys, and private keys. FPT_APW_EXT.1 Protection of Administrator Passwords FPT_APW_EXT.1.1 The TSF shall store administrative passwords in non-plaintext form. FPT_APW_EXT.1.2 The TSF shall prevent the reading of plaintext administrative passwords. FPT_TST_EXT.1 TSF testing FPT_TST_EXT.1.1 The TSF shall run a suite of the following self-tests [during initial start-up (on power on)] to demonstrate the correct operation of the TSF: [ • Firmware integrity tests • Configuration integrity tests • Cryptographic algorithm tests • DRGB tests • Boot loader image verification]. FPT_TUD_EXT.1 Trusted update FPT_TUD_EXT.1.1 The TSF shall provide Security Administrators the ability to query the currently executing version of the TOE firmware/software and [no other TOE firmware/software version]. FPT_TUD_EXT.1.2 The TSF shall provide Security Administrators the ability to manually initiate updates to TOE firmware/software and [no other update mechanism]. Ixia, A Keysight Business Security Target Page 30 of 92 FPT_TUD_EXT.1.3 The TSF shall provide means to authenticate firmware/software updates to the TOE using a [digital signature mechanism] prior to installing those updates. FPT_STM_EXT.1 Reliable Time Stamps FPT_STM_EXT.1.1 The TSF shall be able to provide reliable time stamps for its own use. FPT_STM_EXT.1.2 The TSF shall [synchronise time with an NTP server]. 5.3.6 TOE Access (FTA) FTA_SSL_EXT.1 TSF-initiated Session Locking FTA_SSL_EXT.1.1 The TSF shall, for local interactive sessions, [ • terminate the session] after a Security Administrator-specified time period of inactivity. FTA_SSL.3 TSF-initiated Termination FTA_SSL.3.1 The TSF shall terminate a remote interactive session after a Security Administrator-configurable time interval of session inactivity. FTA_SSL.4 User-initiated Termination FTA_SSL.4.1 Refinement: The TSF shall allow Administrator-initiated termination of the Administrator’s own interactive session. FTA_TAB.1 Default TOE Access Banners FTA_TAB.1.1 Before establishing an administrative user session the TSF shall display a Security Administrator-specified advisory notice and consent warning message regarding use of the TOE. 5.3.7 Trusted path/channels (FTP) FTP_ITC.1 Inter-TSF trusted channel FTP_ITC.1.1 The TSF shall be capable of using [TLS] to provide a trusted communication channel between itself and authorized IT entities supporting the following capabilities: audit server, [no other capabilities] that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from disclosure and detection of modification of the channel data. FTP_ITC.1.2 The TSF shall permit the TSF or the authorized IT entities to initiate communication via the trusted channel. Ixia, A Keysight Business Security Target Page 31 of 92 FTP_ITC.1.3 The TSF shall initiate communication via the trusted channel for [audit server]. FTP_TRP.1 /Admin Trusted Path FTP_TRP.1.1/Admin The TSF shall be capable of using [HTTPS] to provide a communication path between itself and authorized remote Administrators that is logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from disclosure and provides detection of modification of the channel data. FTP_TRP.1.2 /Admin The TSF shall permit remote Administrators to initiate communication via the trusted path. FTP_TRP.1.3 /Admin The TSF shall require the use of the trusted path for initial Administrator authentication and all remote administration actions. Ixia, A Keysight Business Security Target Page 32 of 92 5.4 Assurance Requirements 18 The TOE security assurance requirements are summarized in Table 12. Table 12: Assurance Requirements Assurance Class Components Description Security Target Evaluation ASE_CCL.1 Conformance Claims ASE_ECD.1 Extended Components Definition ASE_INT.1 ST Introduction ASE_OBJ.1 Security Objectives for the operational environment ASE_REQ.1 Stated Security Requirements ASE_SPD.1 Security Problem Definition ASE_TSS.1 TOE Summary Specification Development ADV_FSP.1 Basic Functional Specification Guidance Documents AGD_OPE.1 Operational User Guidance AGD_PRE.1 Preparative User Guidance Life Cycle Support ALC_CMC.1 Labelling of the TOE ALC_CMS.1 TOE CM Coverage Tests ATE_IND.1 Independent Testing - conformance Vulnerability Assessment AVA_VAN.1 Vulnerability Analysis 19 In accordance with section 7.1 of the NDcPP, the following refinement is made to ASE: a) ASE_TSS.1.1C Refinement: The TOE summary specification shall describe how the TOE meets each SFR. In the case of entropy analysis, the TSS is used in conjunction with required supplementary information on Entropy. Ixia, A Keysight Business Security Target Page 33 of 92 6 TOE Summary Specification 20 The following describes how the TOE fulfils each SFR included in section 5.3. 6.1 Security Audit 6.1.1 FAU_GEN.1 21 The TOE generates the audit records specified at FAU_GEN.1 containing the following fields: a) Date and Time Generated b) Severity Level c) Tag d) Message e) Source IP Address (external Syslog server only) f) Source Name (external Syslog server only) g) Date and Time Received (external Syslog server only) h) Origin (external Syslog server only) i) Facility (external Syslog server only) 22 The following information is logged as a result of the Security Administrator generating/importing or deleting cryptographic keys: a) Generate CSR. Action and key reference. b) Import Certificate. Action and key reference. c) Import CA Certificate. Action and key reference. 6.1.2 FAU_GEN.2 23 The TOE includes the user identity in audit events resulting from actions of identified users. 6.1.3 FAU_STG_EXT.1 24 The Security Administrator can configure the TOE to send logs to a Syslog server. Log events are sent in real-time. Logs are sent via TLS as described by FCS_TLSC_EXT.1. 25 The TOE stores local audit data in 5 1MB rotating log files. When the local audit data store is full, the TOE will delete the oldest log file. 26 Only authorized administrators may view audit records and no capability to modify the audit records is provided. 6.2 Cryptographic Support 6.2.1 FCS_CKM.1 27 The TOE supports key generation for the following asymmetric schemes: a) RSA 2048-bit. Used when generating CSRs. b) ECC P-256/P-384/P-521. Used in TLS. Ixia, A Keysight Business Security Target Page 34 of 92 6.2.2 FCS_CKM.2 28 The TOE supports the following key establishment schemes: a) ECC schemes. Used in TLS. TOE is sender and receiver. The TOE operates as a TLS server for the web GUI/WebAPI providing administration and as a TLS client for the trusted channel with a syslog server. 29 Note: RSA is not included in the list of key establishment schemes as it is only used for authentication in TLS, and not key exchange, per the TLS ciphersuites. 6.2.3 FCS_CKM.4 30 Table 14 shows the origin, storage location and destruction details for cryptographic keys. Unless otherwise stated, the keys are generated by the TOE. 6.2.4 FCS_COP.1/DataEncryption 31 The TOE provides symmetric encryption and decryption capabilities using 128 and 256 bit AES in CBC and GCM mode. AES is implemented in TLS and is used in BouncyCastle key encryption. 32 The relevant NIST CAVP certificate numbers are listed Table 4. 6.2.5 FCS_COP.1/SigGen 33 The TOE provides cryptographic signature generation and verification services using: a) RSA Signature Algorithm with key size of 2048. 34 RSA verification services are used in the TLS. Additionally, RSA signature verification is used for TOE firmware integrity checks. 35 The relevant NIST CAVP certificate numbers are listed in Table 4. 6.2.6 FCS_COP.1/Hash 36 The TOE provides cryptographic hashing services using SHA-1 and SHA-256. 37 SHS is implemented in the following parts of the TSF: a) TLS; b) Digital signature verification as part of trusted update validation; c) Hashing of passwords in non-volatile storage; and d) Authentication of NTP server. 38 The relevant NIST CAVP certificate numbers are listed in Table 4. 6.2.7 FCS_COP.1/KeyedHash 39 The TOE provides keyed-hashing message authentication services using HMAC- SHA-1, and HMAC-SHA-256. 40 HMAC is implemented in TLS and the configuration integrity test. 41 The characteristics of the HMACs used in the TOE are given in Table 13. Table 13: HMAC Characteristics Ixia, A Keysight Business Security Target Page 35 of 92 Algorithm Block Size Key Size Digest Size HMAC-SHA-1 512 bits 160 bits 160 bits HMAC-SHA-256 512 bits 256 bits 256 bits 42 The relevant NIST CAVP certificate numbers are listed in Table 4. 6.2.8 FCS_HTTPS_EXT.1 43 The TOE web GUI/WebAPI is accessed via an HTTPS connection using the TLS implementation described by FCS_TLSS_EXT.1. The TOE does not use HTTPS in a client capacity. The TOE’s HTTPS protocol complies with RFC 2818. 44 RFC 2818 specifies HTTP over TLS. The majority of RFC 2818 is spent on discussing practices for validating endpoint identities and how connections must be setup and torn down. The TOE web GUI/WebAPI operates on an explicit port designed to natively speak TLS: it does not attempt STARTTLS or similar multi- protocol negotiation which is described in section 2.3 of RFC 2818. The web server attempts to send closure Alerts prior to closing a connection in accordance with section 2.2.2 of RFC 2818. 6.2.9 FCS_NTP_EXT.1 45 The TOE makes use of an NTP v4 client that implements the symmetric key authentication scheme defined in RFC5905, performing authentication using SHA-1. 46 The TOE does not update NTP time from broadcast or multicast addresses and supports configuration of at least 3 NTP time sources. 6.2.10 FCS_RBG_EXT.1 47 The TOE contains a Hash_DRBG (any) that is seeded from a hardware entropy source that provides a minimum of 256 bits of entropy. Additional detail is provided the proprietary Entropy Description. 6.2.11 FCS_TLSC_EXT.2 48 The TOE operates as a TLS client for the trusted channel with a syslog server. 49 TLS 1.2 is allowed and ciphersuites are restricted to the following: a) TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 as defined in RFC 5289 b) TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5289 c) TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 4492 50 Ciphersuites are not user-configurable. 51 The TOE supports 2-way certificate authentication with X.509v3 certificates for Syslog communication. Only DNS names are supported as acceptable reference identifiers. For Syslog certificate verification, the TOE compares the reference identifiers to the identifier in the presented Syslog server’s TLS certificate. 52 When the TLS client receives an X.509 certificate from the server, the client will compare the reference identifier with the established Subject Alternative Names (SANs) in the certificate. If a SAN is available and does not match the reference identifier, then the verification fails and the channel is terminated. If there are no SANs of the correct type (DNS name) in the certificate, then the TOE will compare Ixia, A Keysight Business Security Target Page 36 of 92 the reference identifier to the Common Name (CN) in the certificate Subject. If there is no CN, then the verification fails and the channel is terminated. If the CN exists and does not match, then the verification fails and the channel is terminated. Otherwise, the reference identifier verification passes and additional verification actions can proceed. 53 The TLS client supports wildcards but does not support certificate pinning. 54 The TLS client will transmit the Supported Elliptic Curves extension in the Client Hello message by default with support for the following NIST curves: P256, P384, P521. The non-TOE server can choose to negotiate the elliptic curve from this set for any of the mutually negotiable elliptic curve ciphersuites. 6.2.12 FCS_TLSS_EXT.1 55 The TOE operates as a TLS server for the web GUI/WebAPI trusted path. 56 The server only allows TLS protocol version1.2 (rejecting any other protocol version, including SSL 2.0, SSL 3.0, TLS 1.0 and TLS 1.1 and any other unknown TLS version string supplied) and is restricted to the following ciphersuites by default: a) TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 as defined in RFC 5289 b) TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 as defined in RFC 5289 c) TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA as defined in RFC 4492 57 Ciphersuites are not user-configurable. 58 The TLS server is capable of negotiating ciphersuites that include ECDHE key agreement schemes. The TLS server supports NIST curves P256, P384, P521. 6.3 Identification and Authentication 6.3.1 FIA_PMG_EXT.1 59 The TOE supports the local definition of users with corresponding passwords. The passwords can be composed of any combination of upper and lower case letters, numbers, and special characters “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”, “`”, ”~”, ”_”, ”+”, ”-“, ”=”, ”{“, ”}”, “|”, “\”, “:”, “””, ”;”, ”’”, “<”, “>”, “?”, “,”, “.”, “/”, “[”, ”]”. 60 The minimum password length is settable by the Administrator and can range from 15 to 100 characters. 6.3.2 FIA_UIA_EXT.1 61 The TOE requires all users to be successfully identified and authenticated. The TOE following actions may occur prior to authentication: a) Display the warning banner; b) Access to help files (PDF and html format); c) View alarm notifications (i.e. system health alarms); and d) View software version number. 62 Administrative access to the TOE is facilitated through: a) Directly connecting to the TOE via the Serial Console b) Remotely connecting to the TOE web GUI/WebAPI via HTTPS Ixia, A Keysight Business Security Target Page 37 of 92 6.3.3 FIA_UAU_EXT.2 63 Regardless of the interface at which the administrator interacts, the TOE prompts the user for a credential. Only after the administrative user presents the correct authentication credentials will they be granted access to the TOE administrative functionality. 64 The TOE provides a local password based authentication mechanism. 65 The TOE supports local authentication for each management interface. Authentication is successful when the submitted username and password are verified against stored values. 6.3.4 FIA_UAU.7 66 For all authentication at the local Serial Console the TOE displays only bullets when the administrative password is entered so that the password is obscured. 6.3.5 FIA_AFL.1 67 The TOE is capable of tracking authentication failures of remote administrators. 68 When a user account has sequentially failed authentication the configured number of times (default 3), the account will be locked until a System Administrator performs a password reset on the account. 69 The administrator can configure the maximum number of failed attempts using the web GUI/WebAPI or Serial Console. 70 The Serial Console does not implement the lockout mechanism. 6.3.6 FIA_X509_EXT.1/Rev 71 The TOE performs X.509 certificate validation at the following points: a) TOE TLS client validation of server X.509 certificates; b) When certificates are loaded into the TOE, such as when importing CAs, certificate responses and other device-level certificates 72 In all scenarios, certificates are checked for several validation characteristics: a) If the certificate ‘notAfter’ date is in the past, then this is an expired certificate which is considered invalid; b) The certificate chain must terminate with a trusted CA certificate; c) Server certificates consumed by the TOE TLS client must have a ‘serverAuthentication’ extendedKeyUsage purpose; d) The TOE validates a certificate path and treats a certificate as a CA certificate when certificates include the basicConstraints extensions and that the CA flag is set to “TRUE” for all CA certificates. 73 Certificate revocation checking for the above scenarios is performed using a CRL. 74 As X.509 certificates are not used for trusted updates, firmware integrity self-tests or client authentication, the code-signing and clientAuthentication purpose is not checked in the extendedKeyUsage for related certificates. 75 The TOE ensures that the X.509 certificates adhere to RFC 5280 Section 6.3 (certificate validation and certificate path validation), which can be summarized as follows: Ixia, A Keysight Business Security Target Page 38 of 92 a) The public key algorithm and parameters are checked b) The current date/time is checked against the validity period revocation status is checked c) Issuer name of X matches the subject name of X+1 d) Name constraints are checked e) Policy OIDs are checked f) Policy constraints are checked; issuers are ensured to have CA signing bits g) Path length is checked h) Critical extensions are processed 76 If, during the entire trust chain verification activity, any certificate under review fails a verification check, then the entire trust chain is deemed untrusted. 6.3.7 FIA_X509_EXT.2 77 The TOE has a trust store where root CA and intermediate CA certificates can be stored. The trust store is not cached: if a certificate is deleted, it is immediately untrusted. If a certificate is added to the trust store, it is immediately trusted for its given scope. 78 Instructions for configuring the trusted IT entities to supply appropriate X.509 certificates are captured in the guidance documents. 79 As part of the verification process, a CRL is used to determine whether the certificate is revoked or not. If the CRL cannot be obtained, the validation will fail. 6.3.8 FIA_X509_EXT.3 80 The TOE supports the generation of Certificate Request Messages as specified by RFC 2986 and validates the chain of certificates from the root CA upon receiving the CA Certificate Response. Certificate Request Messages provided by the TOE include the following information in the request: a) Public key b) Common Name (CN) c) Organization (O) d) Organizational Unit (OU) e) Country (C) 6.4 Security Management 6.4.1 FMT_MOF.1/ManualUpdate 81 The TOE restricts the ability to perform software updates to Security Administrators. 6.4.2 FMT_MOF.1/Functions 82 The TOE restricts the ability to modify (enable/disable) transmission of audit records to an external audit server to Security Administrators. Ixia, A Keysight Business Security Target Page 39 of 92 6.4.3 FMT_MTD.1/CoreData 83 Users are required to login, no TOE functionality is available before identification and authentication occurs. 6.4.4 FMT_SMR.2 84 The TOE implements role-based access control based on pre-defined profiles that are assigned when creating a user. 85 Management of TSF data via the Serial Console or Web GUI/WebAPI is restricted to Security Administrators. 6.4.5 FMT_MTD.1/CryptoKeys 86 The TOE restricts generation, importation, or deletion of cryptographic keys. to Security Administrators. 6.4.6 FMT_SMF.1 87 The TOE may be managed via the Serial Console or GUI/WebAPI (HTTPS). The specific management capabilities include: a) Ability to administer the TOE locally via Serial Console and remotely via web GUI/WebAPI b) Ability to configure the access banner via web GUI/WebAPI c) Ability to configure the session inactivity time before session termination or locking via web GUI/WebAPI d) Ability to update the TOE and to verify the updates via web GUI/WebAPI e) Ability to configure the authentication failure parameters via web GUI/WebAPI f) Ability to configure audit behavior (enable/disable remote logging) via web GUI/WebAPI g) Ability to configure NTP time sources through web GUI/WebAPI h) Ability to manage the cryptographic keys, including import and management of X.509v3 certificates via web GUI/WebAPI. 6.5 Protection of the TSF 6.5.1 FPT_SKP_EXT.1 88 Keys are protected as described in Table 14. In all cases, plaintext keys cannot be viewed through an interface designed specifically for that purpose. Table 14: Keys Key Generation/ Algorithm Storage Destruction TLS Server Private Key BouncyCastle RSA (2048 bits) Flash – encrypted (BCFKS) n/a as not plaintext. Ixia, A Keysight Business Security Target Page 40 of 92 Key Generation/ Algorithm Storage Destruction RAM - plaintext JVM garbage collection on deallocation. TLS Client Private Key BouncyCastle RSA (2048 bits) Flash – encrypted (BCFKS) n/a as not plaintext. RAM - plaintext JVM garbage collection on deallocation. TLS Session Keys BouncyCastle AES (128) RAM - plaintext JVM garbage collection on deallocation. BCFKS Key Encrypting Key BouncyCastle – PBKDF2 AES (256) Derived / RAM - plaintext JVM garbage collection on deallocation. NTP Key User generated Flash – plaintext Overwritten with new value of key via Linux file overwite. 6.5.2 FPT_APW_EXT.1 89 Passwords are protected as describe in Table 15. In all cases plaintext passwords cannot be viewed through an interface designed specifically for that purpose. Table 15: Passwords Password Generation/ Algorithm Storage Locally stored administrator passwords User generated Flash - SHA-1 6.5.3 FPT_TST_EXT.1 90 At startup, the TOE performs the following tests: a) Firmware integrity test using CRC32 b) Configuration integrity test using HMAC SHA-256 c) Algorithm Known Answer Tests d) DRBG health checks: instantiate, un-instantiate, generate, and reseed e) Boot loader image verification – the boot loader verifies the SHA256 hash of file “mss-upgrade-components.bin” before the software is installed. Before the “mss-upgrade-components.bin” file is decrypted, the SHA256 hash value will be verified. . 91 The TOE performs this suite of FIPS power-up and conditional self-tests to verify its correct operation. If any of the self-tests fail, the TOE enters into a critical error state and the appliance must be rebooted by an administrator to run the tests again. Ixia, A Keysight Business Security Target Page 41 of 92 92 The cryptographic module executes the following conditional tests when the related service is invoked: a) Continuous NDRNG test b) Continuous DRBG test c) RSA pairwise consistency test d) Configuration integrity test using HMAC SHA-256 e) Firmware load test with 2048-bit RSA key 6.5.4 FPT_TUD_EXT.1 93 The current firmware version may be queried using GUI/WebAPI. 94 Digitally signed (RSA 2048) upgrade tar files are acquired by contacting Ixia Technical Support or downloaded via a Customer Portal. Only authorized administrators can perform manual software upgrades. 95 When the administrator performs the software upgrade, the TOE verifies the digital signature of the upgrade files using a hardcoded RSA 2048-bit public key. 96 If the digital signature verification fails, the update is aborted, and a log is generated. 97 Upon successful verification, the TOE software extracts the upgrade components from the tar file and performs the software upgrade. After the software is installed, the TOE is automatically restarted and requires the administrator to log in again for the upgrade process to be complete. If the newly installed software fails for any reason, the TOE software reverts to the previous version without loss of functionality. 6.5.5 FPT_STM_EXT.1 98 The TOE uses external NTP servers to synchronize the clock and provide reliable timestamps for syslog messages. 99 The TOE provides reliable time stamps for the following: a) Security Audit functionality b) Track the inactivity of administrative sessions c) Cryptographic functions 6.6 TOE Access 6.6.1 FTA_SSL_EXT.1 100 The TOE is configured to terminate local inactive sessions (Serial Console) based on a specified time period of inactivity configured by a Security Administrator. 6.6.2 FTA_SSL.3 101 The Security Administrator may configure the TOE to terminate an inactive remote interactive session following a specified period of time. 6.6.3 FTA_SSL.4 102 Administrative users are allowed to terminate their own interactive sessions by logging out. Ixia, A Keysight Business Security Target Page 42 of 92 6.6.4 FTA_TAB.1 103 The TOE displays an administrator configurable message to users prior to login at the Serial Console and Web GUI. 104 Note: the Web API is not interactive and does not display a banner. 6.7 Trusted Path/Channels 6.7.1 FTP_ITC.1 105 The TOE supports secure communication with the following IT entities: a) TLS v1.2 for connections to the Syslog server 6.7.2 FTP_TRP.1/Admin 106 The TOE provides the following trusted paths for remote administration: a) Web GUI/WebAPI over HTTPS per FCS_HTTPS_EXT.1.1 Ixia, A Keysight Business Security Target Page 43 of 92 7 Rationale 7.1 Conformance Claim Rationale 107 The following rationale is presented with regard to the PP conformance claims: a) TOE type. As identified in section 2.1, the TOE is network device, consistent with the NDcPP. b) Security problem definition. As shown in section 3, the threats, OSPs and assumptions are reproduced directly from the NDcPP. c) Security objectives. As shown in section 4, the security objectives are reproduced directly from the NDcPP. d) Security requirements. As shown in section 5, the security requirements are reproduced directly from the NDcPP. No additional requirements have been specified. 7.2 Security Objectives Rationale 108 All security objectives are drawn directly from the NDcPP. 7.3 Security Requirements Rationale 109 All security requirements are drawn directly from the NDcPP. Table 16 presents a mapping between threats and SFRs as presented in the NDcPP. Table 16: NDcPP SFR Rationale Identifier SFR Rationale T.UNAUTHORIZED_ADMINIS TRATOR_ACCESS • The Administrator role is defined in FMT_SMR.2 and the relevant administration capabilities are defined in FMT_SMF.1 and FMT_MTD.1/CoreData, with optional additional capabilities in FMT_MOF.1/Services and FMT_MOF.1/Functions • The actions allowed before authentication of an Administrator are constrained by FIA_UIA_EXT.1, and include the advisory notice and consent warning message displayed according to FTA_TAB.1 • The requirement for the Administrator authentication process is described in FIA_UAU_EXT.2 • Locking of Administrator sessions is ensured by FTA_SSL_EXT.1 (for local sessions), FTA_SSL.3 (for remote sessions), and FTA_SSL.4 (for all interactive sessions) • The secure channel used for remote Administrator connections is specified in FTP_TRP.1/Admin • (Malicious actions carried out from an Administrator session are separately addressed by T.UNDETECTED_ACTIVITY) Ixia, A Keysight Business Security Target Page 44 of 92 Identifier SFR Rationale • (Protection of the Administrator credentials is separately addressed by T.PASSWORD_CRACKING). T.WEAK_CRYPTOGRAPHY • Requirements for key generation and key distribution are set in FCS_CKM.1 and FCS_CKM.2 respectively • Requirements for use of cryptographic schemes are set in FCS_COP.1/DataEncryption, FCS_COP.1/SigGen, FCS_COP.1/Hash, and FCS_COP.1/KeyedHash • Requirements for random bit generation to support key generation and secure protocols (see SFRs resulting from T.UNTRUSTED_COMMUNICATION_CHANNELS) are set in FCS_RBG_EXT.1 • Management of cryptographic functions is specified in FMT_SMF.1 T.UNTRUSTED_COMMUNI CATION_CHANNELS • The general use of secure protocols for identified communication channels is described at the top level in FTP_ITC.1 and FTP_TRP.1/Admin; for distributed TOEs the requirements for inter-component communications are addressed by the requirements in FPT_ITT.1 • Requirements for the use of secure communication protocols are set for all the allowed protocols in FCS_DTLSC_EXT.1, FCS_DTLSC_EXT.2, FCS_DTLSS_EXT.1, FCS_DTLSS_EXT.2, FCS_HTTPS_EXT.1, FCS_IPSEC_EXT.1, FCS_SSHC_EXT.1, FCS_SSHS_EXT.1, FCS_TLSC_EXT.1, FCS_TLSC_EXT.2, FCS_TLSS_EXT.1, FCS_TLSS_EXT.2 • Optional and selection-based requirements for use of public key certificates to support secure protocols are defined in FIA_X509_EXT.1, FIA_X509_EXT.2, FIA_X509_EXT.3 T.WEAK_AUTHENTICATIO N_ENDPOINTS • The use of appropriate secure protocols to provide authentication of endpoints (as in the SFRs addressing T.UNTRUSTED_COMMUNICATION_CHANNELS) are ensured by the requirements in FTP_ITC.1 and FTP_TRP.1/Admin; for distributed TOEs the authentication requirements for endpoints in inter-component communications are addressed by the requirements in FPT_ITT.1 • Additional possible special cases of secure authentication during registration of distributed TOE components are addressed by FCO_CPC_EXT.1 and FTP_TRP.1/Join. T.UPDATE_COMPROMISE • Requirements for protection of updates are set in FPT_TUD_EXT.1 • Additional optional use of certificate-based protection of signatures can be specified using FPT_TUD_EXT.2, supported by the X.509 certificate processing requirements in FIA_X509_EXT.1, FIA_X509_EXT.2 and FIA_X509_EXT.3 Ixia, A Keysight Business Security Target Page 45 of 92 Identifier SFR Rationale • Requirements for management of updates are defined in FMT_SMF.1 and (for manual updates) in FMT_MOF.1/ManualUpdate, with optional requirements for automatic updates in FMT_MOF.1/AutoUpdate T.UNDETECTED_ACTIVITY • Requirements for basic auditing capabilities are specified in FAU_GEN.1 and FAU_GEN.2, with timestamps provided according to FPT_STM_EXT.1 • Requirements for protecting audit records stored on the TOE are specified in FAU_STG.1 • Requirements for secure transmission of local audit records to an external IT entity via a secure channel are specified in FAU_STG_EXT.1 • Optional additional requirements for dealing with potential loss of locally stored audit records are specified in FAU_STG_EXT.2/LocSpace, and FAU_STG.3/LocSpace • If (optionally) configuration of the audit functionality is provided by the TOE then this is specified in FMT_SMF.1, and confining this functionality to Security Administrators is required by FMT_MOF.1/Functions. T.SECURITY_FUNCTIONAL ITY_COMPROMISE • Protection of secret/private keys against compromise is specified in FPT_SKP_EXT.1 • Secure destruction of keys is specified in FCS_CKM.4 • If (optionally) management of keys is provided by the TOE then this is specified in FMT_SMF.1, and confining this functionality to Security Administrators is required by FMT_MTD.1/CryptoKeys • (Protection of passwords is separately covered under T.PASSWORD_CRACKING) T.PASSWORD_CRACKING • Requirements for password lengths and available characters are set in FIA_PMG_EXT.1 • Protection of password entry by providing only obscured feedback is specified in FIA_UAU.7 • Actions on reaching a threshold number of consecutive password failures are specified in FIA_AFL.1 • Requirements for secure storage of passwords are set in FPT_APW_EXT.1. T.SECURITY_FUNCTIONAL ITY_FAILURE • Requirements for running self-test(s) are defined in FPT_TST_EXT.1 • Optional use of certificates to support self-test(s) is defined in FPT_TST_EXT.2 (with support for the use of certificates in FIA_X509_EXT.1, FIA_X509_EXT.2, and FIA_X509_EXT.3), Ixia, A Keysight Business Security Target Page 46 of 92 Annex A: Extended Components Definition 110 This annex reproduces the NDcPP Appendix C extended components definition. Security Audit (FAU) Security Audit Data Generation (FAU_GEN_EXT) Family Behaviour This component defines the requirements for components in a distributed TOE to generate security audit data. Component levelling FAU_GEN_EXT.1 Security audit data shall be generated by all components in a distributed TOE Management: FAU_GEN_EXT.1 The following actions could be considered for the management functions in FMT: a) The TSF shall have the ability to configure the cryptographic functionality. Audit: FAU_GEN_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) No audit necessary. FAU_ GEN_EXT.1 Security Audit Data Generation for Distributed TOE Components FAU_GEN_EXT.1 Security Audit Data Generation Hierarchical to: No other components. Dependencies: None. FAU_GEN_EXT.1.1. The TSF shall be able to generate audit records for each TOE component. The audit records generated by the TSF of each TOE component shall include the subset of security relevant audit events which can occur on the TOE component. Application Note 135 Ixia, A Keysight Business Security Target Page 47 of 92 The TOE must be able to generate audit records for each TOE component. Some TOE components of a distributed TOE might not implement the complete TSF of the overall TOE but only a subset of the TSF. The audit records for each TOE component need to cover all security relevant audit events according to the subset of the TSF implemented by this particular TOE component but not necessarily all security relevant audit events according to the TSF of the overall TOE. If a security-relevant event can occur on multiple TOE components, it needs to cause generation of an audit record uniquely identifying the component associated with the event. The ST author shall identify for each TOE component which of the overall required audit events defined in FAU_GEN.1.1 are logged. The ST author may decide to do this by providing a corresponding table. The information provided needs to be in agreement with Table 1. The overall TOE needs to cover all auditable events listed in Table 2 (and Tables 4 and 5 as applicable to the overall TOE). Protected audit event storage (FAU_STG_EXT) Family Behaviour This component defines the requirements for the TSF to be able to securely transmit audit data between the TOE and an external IT entity. Component levelling FAU_STG_EXT.1 Protected audit event storage requires the TSF to use a trusted channel implementing a secure protocol. FAU_STG_EXT.2 Counting lost audit data requires the TSF to provide information about audit records affected when the audit log becomes full. FAU_STG_EXT.3 Protected Local audit event storage for distributed TOEs requires the TSF to use a trusted channel to protect audit transfer to another TOE component. FAU_STG_EXT.4 Protected Remote audit event storage for distributed TOEs requires the TSF to use a trusted channel to protect audit transfer to another TOE component. Management: FAU_STG_EXT.1, FAU_STG_EXT.2, FAU_STG_EXT.3, FAU_STG_EXT.4 The following actions could be considered for the management functions in FMT: a) The TSF shall have the ability to configure the cryptographic functionality. Audit: FAU_STG_EXT.1, FAU_STG_EXT.2, FAU_STG_EXT.3, FAU_STG_EXT.4 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: Ixia, A Keysight Business Security Target Page 48 of 92 a) No audit necessary. FAU_ STG_EXT.1 Protected Audit Event Storage FAU_STG_EXT.1 Protected Audit Event Storage Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FTP_ITC.1 Inter-TSF Trusted Channel FAU_STG_EXT.1.1 The TSF shall be able to transmit the generated audit data to an external IT entity using a trusted channel according to FTP_ITC. Application Note 136 For selecting the option of transmission of generated audit data to an external IT entity the TOE relies on a non-TOE audit server for storage and review of audit records. The storage of these audit records and the ability to allow the Administrator to review these audit records is provided by the operational environment in that case. Since the external audit server is not part of the TOE, there are no requirements on it except the capabilities for ITC transport for audit data. No requirements are placed upon the format or underlying protocol of the audit data being transferred. The TOE must be capable of being configured to transfer audit data to an external IT entity without Administrator intervention. Manual transfer would not meet the requirements. Transmission could be done in real-time or periodically. If the transmission is not done in real- time then the TSS describes what event stimulates the transmission to be made and what range of frequencies the TOE supports for making transfers of audit data to the audit server; the TSS also suggests typical acceptable frequencies for the transfer. For distributed TOEs each component must be able to export audit data across a protected channel external (FTP_ITC.1) or intercomponent (FPT_ITT.1 or FTP_ITC.1) as appropriate. At least one component of the TOE must be able to export audit records via FTP_ITC.1 such that all TOE audit records can be exported to an external IT entity. FAU_STG_EXT.1.2 The TSF shall be able to store generated audit data on the TOE itself. [selection: • TOE shall consist of a single standalone component that stores audit data locally, • The TOE shall be a distributed TOE that stores audit data on the following TOE components: [assignment: identification of TOE components], • The TOE shall be a distributed TOE with storage of audit data provided externally for the following TOE components: [assignment: list of TOE components that do not store audit data locally and the other TOE components to which they transmit their generated audit data]. Application Note 137 If the TOE is a standalone TOE (i.e. not a distributed TOE) the option 'The TOE shall consist of a single standalone component that stores audit data locally' shall be selected. If the TOE is a distributed TOE the option 'The TOE shall be a distributed TOE that stores audit data on the following TOE components: [assignment: identification of TOE components]' shall be selected and the TOE components which store audit data locally shall be listed in the assignment. Ixia, A Keysight Business Security Target Page 49 of 92 Since all TOEs are required to provide functions to store audit data locally this option needs to be selected for all distributed TOEs. In addition, FAU_GEN_EXT.1 and FAU_STG_EXT.3 shall be claimed in the ST. If the distributed TOE consists only of components which are storing audit data locally, it is sufficient to select only the option 'The TOE shall be a distributed TOE that stores audit data on the following TOE components: [assignment: identification of TOE components]' and add FAU_GEN_EXT.1 and FAU_STG_EXT.3. If the TOE is a distributed TOE and some TOE components are not storing audit data locally, the option 'The TOE shall be a distributed TOE with storage of audit data provided externally for the following TOE components: [assignment: list of TOE components that do not store audit data locally and the other TOE components to which they transmit their generated audit data]' shall be selected in addition to the option 'The TOE shall be a distributed TOE that stores audit data on the following TOE components: [assignment: identification of TOE components]'. In that case FAU_STG_EXT.4 shall be claimed in the ST in addition to FAU_GEN_EXT.1 and FAU_STG_EXT.3. For the option 'The TOE shall be a distributed TOE with storage of audit data provided externally for the following TOE components: [assignment: list of TOE components that do not store audit data locally and the other TOE components to which they transmit their generated audit data]' the TOE components that to not store audit data locally shall be mapped to the TOE components to which they transmit their generated audit data. For distributed TOEs this SFR can be fulfilled either by every TOE component storing its own security audit data locally or by one or more TOE components storing audit data locally and other TOE components which are not storing audit information locally sending security audit data to other TOE components for local storage. For the transfer of security audit data between TOE components a protected channel according to FTP_ITC.1 or FPT_ITT.1 shall be used. The TSS shall describe which TOE components store security audit data locally and which TOE components do not store security audit data locally. For the latter, the TSS shall describe at which other TOE component the audit data is stored locally. FAU_STG_EXT.1.3 The TSF shall [selection: drop new audit data, overwrite previous audit records according to the following rule: [assignment: rule for overwriting previous audit records], [assignment: other action]] when the local storage space for audit data is full. Application Note 138 The external log server might be used as alternative storage space in case the local storage space is full. The “other action” could in this case be defined as “send the new audit data to an external IT entity”. For distributed TOEs each component is not required to store generated audit data locally but the overall TOE needs to be able to store audit data locally. Each component must at least provide the ability to temporarily buffer audit information locally to ensure that audit records are preserved in case of network connectivity issues. Buffering audit information locally, does not necessarily involve non-volatile memory: audit information could be buffered in volatile memory. However, the local storage of audit information in the sense of FAU_STG_EXT.1.3 needs to be done in non- volatile memory. For every component which performs local storage of audit information, the behaviour when local storage is exhausted needs to be described. For every component which is buffering audit information instead of storing audit information locally itself, it needs to be described what happens in case the buffer space is exhausted. FAU_ STG_EXT.2 Counting lost audit data FAU_STG_EXT.2 Counting lost audit data Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FAU_STG_EXT.1 External Audit Trail Storage Ixia, A Keysight Business Security Target Page 50 of 92 FAU_STG_EXT.2.1 The TSF shall provide information about the number of [selection: dropped, overwritten, [assignment: other information]] audit records in the case where the local storage has been filled and the TSF takes one of the actions defined in FAU_STG_EXT.1.3. Application Note 139 This option should be chosen if the TOE supports this functionality. In case the local storage for audit records is cleared by the Administrator, the counters associated with the selection in the SFR should be reset to their initial value (most likely to 0). The guidance documentation should contain a warning for the Administrator about the loss of audit data when he clears the local storage for audit records. For distributed TOEs each component that implements counting of lost audit data has to provide a mechanism for Administrator access to, and management of, this information. If FAU_STG_EXT.2 is added to the ST, the ST has to make clear any situations in which lost audit data is not counted. FAU_ STG_EXT.3 Protected Local Audit Event Storage for Distributed TOEs FAU_STG_EXT.3 Protected Audit Event Storage Hierarchical to: No other components. Dependencies: FAU_GEN_EXT.1 Security Audit data generation for Distributed TOE Components [FPT_ITT.1 Intra-TSF Trusted Channel or FTP_ITC.1 Inter- TSF Trusted Channel] FAU_STG_EXT.3.1 The TSF of each TOE component which stores security audit data locally shall perform the following actions when the local storage space for audit data is full: [assignment: table of components and for each component its action chosen according to the following: [selection: drop new audit data, overwrite previous audit records according to the following rule: [assignment: rule for overwriting previous audit records], [assignment: other action]]]. Application Note 140 If a component of a distributed TOE collects data from other components and then forwards it to another component or external IT entity (cf. FAU_STG_EXT.1.1) then the operations in this SFR must be performed in a way to cover the storage space action(s) for all of the audit data that the TOE collects (i.e. not just for the data generated by the collecting component for itself). It is acceptable for a TOE component to store audit information in multiple places (e.g. for redundancy), whether locally in the TOE component itself and in another TOE component, or in more than one other TOE component. TOE components are not required to monitor or audit connectivity or network outages between TOE components. This aspect is covered by the assumption A.COMPONENTS_RUNNING. FAU_ STG_EXT.4 Protected Remote Audit Event Storage for Distributed TOEs FAU_STG_EXT.4 Protected Audit Event Storage Hierarchical to: No other components. Ixia, A Keysight Business Security Target Page 51 of 92 Dependencies: FAU_GEN_EXT.1 Security Audit data generation for Distributed TOE Components [FPT_ITT.1 Intra-TSF Trusted Channel or FTP_ITC.1 Inter- TSF Trusted Channel] FAU_STG_EXT.4.1 Each TOE component which does not store security audit data locally shall be able to buffer security audit data locally until it has been transferred to another TOE component that stores or forwards it. All transfer of audit records between TOE components shall use a protected channel according to [selection: FPT_ITT.1, FTP_ITC.1]. Application Note 141 If a component of a distributed TOE collects data from other components and then forwards it to another component or external IT entity (cf. FAU_STG_EXT.1.1) then the operations in this SFR must be performed in a way to cover the storage space action(s) for all of the audit data that the TOE collects (i.e. not just for the data generated by the collecting component for itself). It is acceptable for a TOE component to store audit information in multiple places (e.g. for redundancy), whether locally in the TOE component itself and in another TOE component, or in more than one other TOE component. TOE components are not required to monitor or audit connectivity or network outages between TOE components. This aspect is covered by the assumption A.COMPONENTS_RUNNING. Cryptographic Support (FCS) Random Bit Generation (FCS_RBG_EXT) FCS_RBG_EXT.1 Random Bit Generation Family Behaviour Components in this family address the requirements for random bit/number generation. This is a new family defined for the FCS class. Component levelling FCS_RBG_EXT.1 Random Bit Generation requires random bit generation to be performed in accordance with selected standards and seeded by an entropy source. Management: FCS_RBG_EXT.1 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen Audit: FCS_RBG_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) Minimal: failure of the randomization process FCS_RBG_EXT.1 Random Bit Generation Hierarchical to: No other components Ixia, A Keysight Business Security Target Page 52 of 92 Dependencies: No other components FCS_RBG_EXT.1.1 The TSF shall perform all deterministic random bit generation services in accordance with ISO/IEC 18031:2011 using [selection: Hash_DRBG (any), HMAC_DRBG (any), CTR_DRBG (AES)]. FCS_RBG_EXT.1.2 The deterministic RBG shall be seeded by at least one entropy source that accumulates entropy from [selection: [assignment: number of software-based sources] software-based noise source, [assignment: number of hardware-based sources] hardware-based noise source] with a minimum of [selection: 128 bits, 192 bits, 256 bits] of entropy at least equal to the greatest security strength, according to ISO/IEC 18031:2011 Table C.1 “Security Strength Table for Hash Functions”, of the keys and hashes that it will generate. Application Note 142 For the first selection in FCS_RBG_EXT.1.2, the ST author selects at least one of the types of noise sources. If the TOE contains multiple noise sources of the same type, the ST author fills the assignment with the appropriate number for each type of source (e.g., 2 software-based noise sources, 1 hardware-based noise source). The documentation and tests required in the Evaluation Activity for this element should be repeated to cover each source indicated in the ST. ISO/IEC 18031:2011 contains three different methods of generating random numbers; each of these, in turn, depends on underlying cryptographic primitives (hash functions/ciphers). The ST author will select the function used and include the specific underlying cryptographic primitives used in the requirement. While any of the identified hash functions (SHA-1, SHA-256, SHA-384, SHA-512) are allowed for Hash_DRBG or HMAC_DRBG, only AES-based implementations for CTR_DRBG are allowed. If the key length for the AES implementation used here is different than that used to encrypt the user data, then FCS_COP.1 may have to be adjusted or iterated to reflect the different key length. For the selection in FCS_RBG_EXT.1.2, the ST author selects the minimum number of bits of entropy that is used to seed the RBG, which must be equal or greater than the security strength of any key generated by the TOE. Cryptographic Protocols (FCS_DTLSC_EXT, FCS_DTLSS_EXT, FCS_HTTPS_EXT, FCS_IPSEC_EXT, FCS_NTP_EXT, FCS_SSHC_EXT, FCS_SSHS_EXT, FCS_TLSC_EXT, FCS_TLSS_EXT) FCS_DTLSC_EXT DTLS Client Protocol Family Behaviour The component in this family addresses the ability for a client to use DTLS to protect data between the client and a server using the DTLS protocol. Component levelling FCS_DTLSC_EXT.1 DTLS Client requires that the client side of DTLS be implemented as specified. Ixia, A Keysight Business Security Target Page 53 of 92 FCS_DTLSC_EXT.2 DTLS Client requires that the client side of the DTLS implementation include mutual authentication. Management: FCS_DTLSC_EXT.1, FCS_DTLSC_EXT.2 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FCS_DTLSC_EXT.1, FCS_DTLSC_EXT.2 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of DTLS session establishment b) DTLS session establishment c) DTLS session termination FCS_DTLSC_EXT.1 DTLS Client Protocol Hierarchical to: No other components Dependencies: FCS_CKM. 1DataEncryption1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen1SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_DTLSC_EXT.1.1 The TSF shall implement [selection: DTLS 1.2 (RFC 6347), DTLS 1.0 (RFC 4347)] supporting the following ciphersuites: [assignment: List of optional ciphersuites and reference to RFC in which each is defined] Application Note 143 The ciphersuites to be tested in the evaluated configuration are limited by this requirement. The ST author should select the ciphersuites that are supported. These requirements will be revisited as new DTLS versions are standardized by the IETF. In a future version of this cPP DTLS v1.2 will be required for all TOEs. FCS_DTLSC_EXT.1.2 The TSF shall verify that the presented identifier matches the reference identifier according to RFC 6125 section 6. Application Note 144 The rules for verification of identity are described in Section 6 of RFC 6125. The reference identifier is established by the Administrator (e.g. entering a URL into a web browser or clicking a link), by configuration (e.g. configuring the name of a mail server or authentication server), or by an application (e.g. a parameter of an API) depending on the application service. Based on a singular reference identifier’s source domain and application service type (e.g. HTTP, SIP, LDAP), the client establishes all reference identifiers which are acceptable, such as a Common Name for the Subject Name field of the certificate and a (case-insensitive) DNS name, URI name, and Service Name for the Subject Alternative Name field. The client then compares this list of all acceptable reference identifiers to the presented identifiers in the DTLS server’s certificate. The preferred method for verification is the Subject Alternative Name using DNS names, URI names, or Service Names. Verification using the Common Name is required for the purposes of backwards compatibility. Additionally, support for use of IP addresses in the Subject Name or Ixia, A Keysight Business Security Target Page 54 of 92 Subject Alternative name is discouraged as against best practices but may be implemented. Finally, the client should avoid constructing reference identifiers using wildcards. However, if the presented identifiers include wildcards, the client must follow the best practices regarding matching; these best practices are captured in the evaluation activity. FCS_DTLSC_EXT.1.3 When establishing a trusted channel, by default the TSF shall not establish a trusted channel if the server certificate is invalid. The TSF shall also [selection: • Not implement any administrator override mechanism • require administrator authorization to establish the connection if the TSF fails to [selection: match the reference identifier, validate certificate path, validate expiration date, determine the revocation status] of the presented server certificate ]. Application Note 145 “Revocation status” refers to a OCSP or CRL response that indicates the presented certificate is invalid. Inability to make a connection to determine validity shall be handled as specified in FIA_X509_EXT.2.2. If DTLS is selected in FTP_ITC then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/Rev. If DTLS is selected in FPT_ITT, then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/ITT. FCS_DTLSC_EXT.1.4 The TSF shall [selection: not present the Supported Elliptic Curves Extension, present the Supported Elliptic Curves Extension with the following NIST curves: [selection: secp256r1, secp384r1, secp521r1] and no other curves] in the Client Hello. Application Note 146 If ciphersuites with elliptic curves were selected in FCS_DTLSC_EXT.1.1, a selection of one or more curves is required. If no ciphersuites with elliptic curves were selected in FCS_DTLS_EXT.1.1, then “not present the Supported Elliptic Curves Extension” should be selected. This requirement limits the elliptic curves allowed for authentication and key agreement to the NIST curves from FCS_COP.1/SigGen and FCS_CKM.1 and FCS_CKM.2. This extension is required for clients supporting Elliptic Curve ciphersuites. FCS_DTLSC_EXT.2 DTLS Client Protocol with Authentication Hierarchical to: FCS_DTLSC_EXT.1 DTLS Client Protocol Dependencies: FCS_CKM.1/DataEncryption Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation Ixia, A Keysight Business Security Target Page 55 of 92 FCS_DTLSC_EXT.2.1 The TSF shall implement [selection: DTLS 1.2 (RFC 6347), DTLS 1.0 (RFC 4347)] supporting the following ciphersuites: • [assignment: List of optional ciphersuites and reference to RFC in which each is defined]. Application Note 147 The ST author should select the ciphersuites that are supported. These requirements will be revisited as new DTLS versions are standardized by the IETF. In a future version of this cPP DTLS v1.2 will be required for all TOEs. FCS_DTLSC_EXT.2.2 The TSF shall verify that the presented identifier matches the reference identifier according to RFC 6125 section 6. Application Note 148 The rules for verification of identity are described in Section 6 of RFC 6125. The reference identifier is established by the Administrator (e.g. entering a URL into a web browser or clicking a link), by configuration (e.g. configuring the name of a mail server or authentication server), or by an application (e.g. a parameter of an API) depending on the application service. Based on a singular reference identifier’s source domain and application service type (e.g. HTTP, SIP, LDAP), the client establishes all reference identifiers which are acceptable, such as a Common Name for the Subject Name field of the certificate and a (case-insensitive) DNS name, URI name, and Service Name for the Subject Alternative Name field. The client then compares this list of all acceptable reference identifiers to the presented identifiers in the DTLS server’s certificate. FCS_DTLSC_EXT.2.3 When establishing a trusted channel, by default the TSF shall not establish a trusted channel if the server certificate is invalid. The TSF shall also [selection: • Not implement any administrator override mechanism • require administrator authorization to establish the connection if the TSF fails to [selection: match the reference identifier, validate certificate path, validate expiration date, determine the revocation status] of the presented server certificate ]. Application Note 149 “Revocation status” refers to a OCSP or CRL response that indicates the presented certificate is invalid. Inability to make a connection to determine validity shall be handled as specified in FIA_X509_EXT.2.2. If DTLS is selected in FTP_ITC then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/Rev. If DTLS is selected in FPT_ITT, then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/ITT. FCS_DTLSC_EXT.2.4 The TSF shall [selection: not present the Supported Elliptic Curves Extension, present the Supported Elliptic Curves Extension with the following NIST curves: [selection: secp256r1, secp384r1, secp521r1] and no other curves] in the Client Hello]. Application Note 150 If ciphersuites with elliptic curves were selected in FCS_DTLSC_EXT.2.1, a selection of one or more curves is required. If no ciphersuites with elliptic curves were selected in FCS_DTLS_EXT.2.1, then “not present the Supported Elliptic Curves Extension” should be selected. Ixia, A Keysight Business Security Target Page 56 of 92 This requirement limits the elliptic curves allowed for authentication and key agreement to the NIST curves from FCS_COP.1/SigGen and FCS_CKM.1 and FCS_CKM.2. This extension is required for clients supporting Elliptic Curve ciphersuites. FCS_DTLSC_EXT.2.5 The TSF shall support mutual authentication using X.509v3 certificates. Application Note 151 The use of X.509v3 certificates for TLS is addressed in FIA_X509_EXT.2.1. This requirement adds that this use must include the client must be capable of presenting a certificate to a DTLS server for DTLS mutual authentication. FCS_DTLSC_EXT.2.6 The TSF shall [selection: terminate the DTLS session, silently discard the record] if a message received contains an invalid MAC. Application Note 152 The Message Authentication Code (MAC) is negotiated during DTLS handshake phase and is used to protect integrity of messages received from the sender during DTLS data exchange. If MAC verification fails, the session must be terminated or the record must be silently discarded. FCS_DTLSC_EXT.2.7 The TSF shall detect and silently discard replayed messages for: • DTLS records previously received. • DTLS records too old to fit in the sliding window. Application Note 153 Replay Detection is described in section 4.1.2.6 of DTLS 1.2 (RFC 6347) and section 4.1.2.5 of DTLS 1.0 (RFC 4347). For each received record, the receiver verifies the record contains a sequence number is within the sliding receive window and does not duplicate the sequence number of any other record received during the session. "Silently Discard" means the TOE discards the packet responding. FCS_DTLSS_EXT DTLS Server Protocol Family Behaviour The component in this family addresses the ability for a server to use DTLS to protect data between a client and the server using the DTLS protocol. Component levelling FCS_DTLSS_EXT.1 DTLS Server requires that the server side of TLS be implemented as specified. FCS_DTLSS_EXT.2: DTLS Server requires the mutual authentication be included in the DTLS implementation. Management: FCS_DTLSS_EXT.1, FCS_DTLSS_EXT.2 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FCS_DTLSS_EXT.1, FCS_DTLSS_EXT.2 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of DTLS session establishment. b) DTLS session establishment Ixia, A Keysight Business Security Target Page 57 of 92 c) DTLS session termination FCS_DTLSS_EXT.1 DTLS Server Protocol Hierarchical to: No other components Dependencies: FCS_CKM.1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1//DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1//SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_DTLSS_EXT.1.1 The TSF shall implement [selection: DTLS 1.2 (RFC 6347), DTLS 1.0 (RFC 4347)] supporting the following ciphersuites: • [assignment: List of optional ciphersuites and reference to RFC in which each is defined] Application Note 154 The ciphersuites to be tested in the evaluated configuration are limited by this requirement. The ST author should select the ciphersuites that are supported. These requirements will be revisited as new DTLS versions are standardized by the IETF. In a future version of this cPP DTLS v1.2 will be required for all TOEs. FCS_DTLSS_EXT.1.2 The TSF shall deny connections from clients requesting [assignment: list of protocol versions]. Application Note 155 This version of the cPP does not require the TOE to deny DTLS v1.0. In a future version of this cPP DTLS v1.0 will be required to be denied for all TOEs. FCS_DTLSS_EXT.1.3 The TSF shall not proceed with a connection handshake attempt if the DTLS Client fails validation. Application Note 156 The process to validate the IP address of a DTLS client is specified in section 4.2.1 of RFC 6347 (DTLS 1.2) and RFC 4347 (DTLS 1.0). The TOE validates the DTLS client during Connection Establishment (Handshaking) and prior to the TSF sending a Server Hello message. After receiving a ClientHello, the DTLS Server sends a HelloVerifyRequest along with a cookie. The cookie is a signed message using the keyed hash function specified in FCS_COP.1 /KeyedHash. The DTLS Client then sends another ClientHello with the cookie attached. If the DTLS server successfully verifies the signed cookie, the Client is not using a spoofed IP address. FCS_DTLSS_EXT.1.4 The TSF shall [selection: perform RSA key establishment with key size [selection: 2048 bits, 3072 bits, 4096 bits]; generate EC Diffie-Hellman parameters over NIST curves [selection: secp256r1, secp384r1, secp521r1] and no other curves; generate Diffie-Hellman parameters of size [selection: 2048 bits, 3072 bits]]. Application Note 157 Ixia, A Keysight Business Security Target Page 58 of 92 If the ST lists a DHE or ECDHE ciphersuite in FCS_DTLSS_EXT.1.1, the ST must include the Diffie-Hellman or NIST curves selection in the requirement. FMT_SMF.1 requires the configuration of the key agreement parameters in order to establish the security strength of the DTLS connection. FCS_DTLSS_EXT.1.5 The TSF shall [selection: terminate the DTLS session, silently discard the record] if a message received contains an invalid MAC. Application Note 158 The Message Authentication Code (MAC) is negotiated during DTLS handshake phase and is used to protect integrity of messages received from the sender during DTLS data exchange. If MAC verification fails, the session must be terminated or the record must be silently discarded. FCS_DTLSS_EXT.1.6 The TSF shall detect and silently discard replayed messages for: • DTLS records previously received. • DTLS records too old to fit in the sliding window. Application Note 159 Replay Detection is described in section 4.1.2.6 of DTLS 1.2 (RFC 6347) and section 4.1.2.5 of DTLS 1.0 (RFC 4347). For each received record, the receiver verifies the record contains a sequence number is within the sliding receive window and does not duplicate the sequence number of any other record received during the session. "Silently Discard" means the TOE discards the packet without responding. FCS_DTLSS_EXT.2 DTLS Server Protocol with mutual authentication Hierarchical to: FCS_DTLSS_EXT.1 DTLS Server Protocol Dependencies: FCS_CKM.1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1//DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1//SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_DTLSS_EXT.2.1 The TSF shall implement [selection: DTLS 1.2 (RFC 6347), DTLS 1.0 (RFC 4347)] supporting the following ciphersuites: • [assignment: List of optional ciphersuites and reference to RFC in which each is defined]. Application Note 160 The ciphersuites to be tested in the evaluated configuration are limited by this requirement. The ST author should select the ciphersuites that are supported. These requirements will be revisited as new DTLS versions are standardized by the IETF. In a future version of this cPP DTLS v1.2 will be required for all TOEs. FCS_DTLSS_EXT.2.2 The TSF shall deny connections from clients requesting [assignment: list of protocol versions]. Application Note 161 Ixia, A Keysight Business Security Target Page 59 of 92 This version of the cPP does not require the TOE to deny DTLS v1.0. In a future version of this cPP DTLS v1.0 will be required to be denied for all TOEs. FCS_DTLSS_EXT.2.3 The TSF shall not proceed with a connection handshake attempt if the DTLS Client fails validation. Application Note 162 The process to validate the IP address of a DTLS client is specified in section 4.2.1 of RFC 6347 (DTLS 1.2) and RFC 4347 (DTLS 1.0). The TOE validates the DTLS client during Connection Establishment (Handshaking) and prior to the TSF sending a Server Hello message. After receiving a ClientHello, the DTLS Server sends a HelloVerifyRequest along with a cookie. The cookie is a signed message using the keyed hash function specified in FCS_COP.1/KeyedHash. The DTLS Client then sends another ClientHello with the cookie attached. If the DTLS server successfully verifies the signed cookie, the Client is not using a spoofed IP address. FCS_DTLSS_EXT.2.4 The TSF shall [selection: perform RSA key establishment with key size [selection: 2048 bits, 3072 bits, 4096 bits]; generate EC Diffie-Hellman parameters over NIST curves [selection: secp256r1, secp384r1, secp521r1] and no other curves; generate Diffie-Hellman parameters of size [selection: 2048 bits, 3072 bits]]. Application Note 163 If the ST lists a DHE or ECDHE ciphersuite in FCS_DTLSS_EXT.2.1, the ST must include the Diffie-Hellman or NIST curves selection in the requirement. FMT_SMF.1 requires the configuration of the key agreement parameters in order to establish the security strength of the DTLS connection. FCS_DTLSS_EXT.2.5 The TSF shall [selection: terminate the DTLS session, silently discard the record] if a message received contains an invalid MAC. Application Note 164 The Message Authentication Code (MAC) is negotiated during the DTLS handshake phase and is used to protect integrity of messages received from the sender during DTLS data exchange. If MAC verification fails, the session must be terminated or the record must be silently discarded. FCS_DTLSS_EXT.2.6 The TSF shall detect and silently discard replayed messages for: • DTLS records that have previously been received. • DTLS records too old to fit in the sliding window. Application Note 165 Replay Detection is described in section 4.1.2.6 of DTLS 1.2 (RFC 6347) and section 4.1.2.5 of DTLS 1.0 (RFC 4347). For each received record, the receiver verifies the record contains a sequence number is within the sliding receive window and does not duplicate the sequence number of any other record received during the session. "Silently Discard" means the TOE discards the packet without responding. FCS_DTLSS_EXT.2.7 The TSF shall support mutual authentication of DTLS clients using X.509v3 certificates. Application Note 166 The use of X.509v3 certificates for DTLS is addressed in FIA_X509_EXT.2.1. This requirement adds that this use must include support for client-side certificates for DTLS mutual authentication. FCS_DTLSS_EXT.2.8 When establishing a trusted channel, by default the TSF shall not establish a trusted channel if the client certificate is invalid. The TSF shall also [selection: • Not implement any administrator override mechanism Ixia, A Keysight Business Security Target Page 60 of 92 • require administrator authorization to establish the connection if the TSF fails to [selection: match the reference identifier, validate certificate path, validate expiration date, determine the revocation status] of the presented client certificate ]. Application Note 167 “Revocation status” refers to a OCSP or CRL response that indicates the presented certificate is invalid. Inability to make a connection to determine validity shall be handled as specified in FIA_X509_EXT.2.2. If DTLS is selected in FTP_ITC then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/Rev. If DTLS is selected in FPT_ITT, then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/ITT. FCS_DTLSS_EXT.2.9 The TSF shall not establish a trusted channel if the distinguished name (DN) or Subject Alternative Name (SAN) contained in a certificate does not match the expected identifier for the client. Application Note 168 The client identifier may be in the Subject field or the Subject Alternative Name extension of the certificate. The expected identifier may either be configured, may be compared to the Domain Name, IP address, username, or email address used by the peer, or may be passed to a directory server for comparison. FCS_HTTPS_EXT.1 HTTPS Protocol Family Behaviour Components in this family define the requirements for protecting remote management sessions between the TOE and a Security Administrator. This family describes how HTTPS will be implemented. This is a new family defined for the FCS Class. Component levelling FCS_HTTPS_EXT.1 HTTPS requires that HTTPS be implemented according to RFC 2818 and supports TLS. Management: FCS_HTTPS_EXT.1 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FCS_HTTPS_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. FCS_HTTPS_EXT.1 HTTPS Protocol Hierarchical to: No other components Ixia, A Keysight Business Security Target Page 61 of 92 Dependencies: [FCS_TLSC_EXT.1 TLS Client Protocol, or FCS_TLSS_EXT.1 TLS Server Protocol] FCS_HTTPS_EXT.1.1 The TSF shall implement the HTTPS protocol that complies with RFC 2818. FCS_HTTPS_EXT.1.2 The TSF shall implement the HTTPS protocol using TLS. FCS_HTTPS_EXT.1.3 If a peer certificate is presented, the TSF shall [selection: not establish the connection, request authorization to establish the connection, [assignment: other action]] if the peer certificate is deemed invalid. FCS_IPSEC_EXT.1 IPsec Protocol Family Behaviour Components in this family address the requirements for protecting communications using IPsec. Component levelling FCS_IPSEC_EXT.1 IPsec requires that IPsec be implemented as specified. Management: FCS_IPSEC_EXT.1 The following actions could be considered for the management functions in FMT: a) Maintenance of SA lifetime configuration Audit: FCS_IPSEC_EXT.1 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Decisions to DISCARD, BYPASS, PROTECT network packets processed by the TOE. b) Failure to establish an IPsec SA c) IPsec SA establishment d) IPsec SA termination e) Negotiation “down” from an IKEv2 to IKEv1 exchange. FCS_IPSEC_EXT.1 Internet Protocol Security (IPsec) Communications Hierarchical to: No other components Dependencies: FCS_CKM.1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation Ixia, A Keysight Business Security Target Page 62 of 92 FCS_IPSEC_EXT.1.1 The TSF shall implement the IPsec architecture as specified in RFC 4301. Application Note 169 RFC 4301 calls for an IPsec implementation to protect IP traffic through the use of a Security Policy Database (SPD). The SPD is used to define how IP packets are to be handled: PROTECT the packet (e.g., encrypt the packet), BYPASS the IPsec services (e.g., no encryption), or DISCARD the packet (e.g., drop the packet). The SPD can be implemented in various ways, including router access control lists, firewall rulesets, a “traditional” SPD, etc. Regardless of the implementation details, there is a notion of a “rule” that a packet is “matched” against and a resulting action that takes place. While there must be a means to order the rules, a general approach to ordering is not mandated, as long as the SPD can distinguish the IP packets and apply the rules accordingly. There may be multiple SPDs (one for each network interface), but this is not required. FCS_IPSEC_EXT.1.2 The TSF shall have a nominal, final entry in the SPD that matches anything that is otherwise unmatched, and discards it. FCS_IPSEC_EXT.1.3 The TSF shall implement [selection: tunnel mode, transport mode]. FCS_IPSEC_EXT.1.4 The TSF shall implement the IPsec protocol ESP as defined by RFC 4303 using the cryptographic algorithms [selection: AES-CBC-128, AES- CBC-192, AES-CBC-256 (specified in RFC 3602), no other algorithm] together with a Secure Hash Algorithm (SHA)-based HMAC [selection: HMAC-SHA-1, HMAC-SHA-256, HMAC-SHA-384, HMAC-SHA-512, no other algorithm] and [selection: AES-GCM-128, AES-GCM-192, AES- GCM-256 (specified in RFC 4106), no other algorithm]. FCS_IPSEC_EXT.1.5 The TSF shall implement the protocol: [selection: • IKEv1, using Main Mode for Phase 1 exchanges, as defined in RFCs 2407, 2408, 2409, RFC 4109, [selection: no other RFCs for extended sequence numbers, RFC 4304 for extended sequence numbers], and [selection: no other RFCs for hash functions, RFC 4868 for hash functions]; • IKEv2 as defined in RFCs 5996 [selection: with no support for NAT traversal, with mandatory support for NAT traversal as specified in RFC 5996, section 2.23)], and [selection: no other RFCs for hash functions, RFC 4868 for hash functions]]. FCS_IPSEC_EXT.1.6 The TSF shall ensure the encrypted payload in the [selection: IKEv1, IKEv2] protocol uses the cryptographic algorithms [selection: AES-CBC- 128, AES_CBC-192 AES-CBC-256 (specified in RFC 3602), AES-GCM- 128, AES-GCM-192, AES-GCM-256 (specified in RFC 5282)]. Application Note 170 AES-GCM-128, AES-GCM-192 and AES-GCM-256 may only be selected if IKEv2 is also selected, as there is no RFC defining AES-GCM for IKEv1. FCS_IPSEC_EXT.1.7 The TSF shall ensure that [selection: • IKEv1 Phase 1 SA lifetimes can be configured by a Security Administrator based on [selection: o number of bytes; o length of time, where the time values can be configured within [assignment: integer range including 24] hours; Ixia, A Keysight Business Security Target Page 63 of 92 ]; • IKEv2 SA lifetimes can be configured by a Security Administrator based on [selection: o number of bytes; o length of time, where the time values can be configured within [assignment: integer range including 24] hours ] ]. Application Note 171 The ST author chooses either the IKEv1 requirements or IKEv2 requirements (or both, depending on the selection in FCS_IPSEC_EXT.1.5). The ST author chooses either volume-based lifetimes or time-based lifetimes (or a combination). This requirement must be accomplished by providing Security Administrator-configurable lifetimes (with appropriate instructions in documents mandated by AGD_OPE). Hardcoded limits do not meet this requirement. In general, instructions for setting the parameters of the implementation, including lifetime of the SAs, should be included in the guidance documentation generated for AGD_OPE. FCS_IPSEC_EXT.1.8 The TSF shall ensure that [selection: • IKEv1 Phase 2 SA lifetimes can be configured by a Security Administrator based on [selection: o number of bytes; o length of time, where the time values can be configured within [assignment: integer range including 8] hours; ]; • IKEv2 Child SA lifetimes can be configured by a Security Administrator based on [selection: o number of bytes; o length of time, where the time values can be configured within [assignment: integer range including 8] hours; ] ]. Application Note 172 The ST author chooses either the IKEv1 requirements or IKEv2 requirements (or both, depending on the selection in FCS_IPSEC_EXT.1.5). The ST author chooses either volume-based lifetimes or time-based lifetimes (or a combination). This requirement must be accomplished by providing Security Administrator-configurable lifetimes (with appropriate instructions in documents mandated by AGD_OPE). Hardcoded limits do not meet this requirement. In general, instructions for setting the parameters of the implementation, including lifetime of the SAs, should be included in the guidance documentation generated for AGD_OPE. FCS_IPSEC_EXT.1.9 The TSF shall generate the secret value x used in the IKE Diffie-Hellman key exchange (“x” in gx mod p) using the random bit generator specified in FCS_RBG_EXT.1, and having a length of at least [assignment: (one or more) number(s) of bits that is at least twice the security strength of the negotiated Diffie-Hellman group] bits. Ixia, A Keysight Business Security Target Page 64 of 92 Application Note 173 For DH groups 19 and 20, the "x" value is the point multiplier for the generator point G. Since the implementation may allow different Diffie-Hellman groups to be negotiated for use in forming the SAs, the assignment in FCS_IPSEC_EXT.1.9 may contain multiple values. For each DH group supported, the ST author consults Table 2 in NIST SP 800-57 “Recommendation for Key Management – Part 1: General” to determine the security strength (“bits of security”) associated with the DH group. Each unique value is then used to fill in the assignment for this element. For example, suppose the implementation supports DH group 14 (2048-bit MODP) and group 20 (ECDH using NIST curve P-384). From Table 2, the bits of security value for group 14 is 112, and for group 20 it is 192. FCS_IPSEC_EXT.1.10 The TSF shall generate nonces used in [selection: IKEv1, IKEv2] exchanges of length [selection: • according to the security strength associated with the negotiated Diffie-Hellman group; • at least 128 bits in size and at least half the output size of the negotiated pseudorandom function (PRF) hash ]. Application Note 174 The ST author must select the second option for nonce lengths if IKEv2 is also selected (as this is mandated in RFC 5996). The ST author may select either option for IKEv1. For the first option for nonce lengths, since the implementation may allow different Diffie-Hellman groups to be negotiated for use in forming the SAs, the assignment in FCS_IPSEC_EXT.1.10 may contain multiple values. For each DH group supported, the ST author consults Table 2 in NIST SP 800-57 “Recommendation for Key Management –Part 1: General” to determine the security strength (“bits of security”) associated with the DH group. Each unique value is then used to fill in the assignment for this element. For example, suppose the implementation supports DH group 14 (2048-bit MODP) and group 20 (ECDH using NIST curve P-384). From Table 2, the bits of security value for group 14 is 112, and for group 20 it is 192. Because nonces may be exchanged before the DH group is negotiated, the nonce used should be large enough to support all TOE-chosen proposals in the exchange. FCS_IPSEC_EXT.1.11 The TSF shall ensure that IKE protocols implement DH Group(s) [selection: 14 (2048-bit MODP), 19 (256-bit Random ECP), 20 (384-bit Random ECP), 24 (2048-bit MODP with 256-bit POS)]. FCS_IPSEC_EXT.1.12 The TSF shall be able to ensure by default that the strength of the symmetric algorithm (in terms of the number of bits in the key) negotiated to protect the [selection: IKEv1 Phase 1, IKEv2 IKE_SA] connection is greater than or equal to the strength of the symmetric algorithm (in terms of the number of bits in the key) negotiated to protect the [selection: IKEv1 Phase 2, IKEv2 CHILD_SA] connection. Application Note 175 The ST author chooses either or both of the IKE selections based on what is implemented by the TOE. Obviously, the IKE version(s) chosen should be consistent not only in this element, but with other choices for other elements in this component. While it is acceptable for this capability to be configurable, the default configuration in the evaluated configuration (either "out of the box" or by configuration guidance in the AGD documentation) must enable this functionality. FCS_IPSEC_EXT.1.13 The TSF shall ensure that all IKE protocols perform peer authentication using [selection: RSA, ECDSA] that use X.509v3 certificates that Ixia, A Keysight Business Security Target Page 65 of 92 conform to RFC 4945 and [selection: Pre-shared Keys, no other method]. FCS_IPSEC_EXT.1.14 The TSF shall only establish a trusted channel if the presented identifier in the received certificate matches the configured reference identifier, where the presented and reference identifiers are of the following fields and types: [selection: SAN: IP address, SAN: Fully Qualified Domain Name (FQDN), SAN: user FQDN, CN: IP address, CN: Fully Qualified Domain Name (FQDN), CN: user FQDN, Distinguished Name (DN)] and [selection: no other reference identifier type, [assignment: other supported reference identifier types]]. FCS_NTP_EXT.1 NTP Protocol Family Behaviour The component in this family addresses the ability for a TOE to protect NTP time synchronization traffic. Component levelling FCS_NTP_EXT.1 Requires NTP to be implemented as specified Management: FCS_NTP_EXT.1 The following actions could be considered for the management functions in FMT: a) Ability to configure NTP Audit: FCS_NTP_EXT.1 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) No audit requirements are specified. FCS_NTP_EXT.1 NTP Protocol Hierarchical to: No other components Dependencies: FCS_COP.1 Cryptographic operation [FCS_DTLSC_EXT.1 DTLC Client Protocol or FCS_IPSEC_EXT.1 IPsec Protocol] FCS_NTP_EXT.1.1 The TSF shall use only the following NTP version(s) [selection: NTP v3 (RFC 1305), NTP v4 (RFC 5905)]. FCS_NTP_EXT.1.2 The TSF shall update its system time using [selection: • Authentication using [selection: SHA1, SHA256, SHA384, SHA512, AES-CBC-128, AES-CBC-256] as the message digest algorithm(s); • [selection: IPsec, DTLS] to provide trusted communication between itself and an NTP time source. ]. Ixia, A Keysight Business Security Target Page 66 of 92 FCS_NTP_EXT.1.3 The TSF shall not update NTP timestamp from broadcast and/or multicast addresses. Application Note 176 The broadcast and multicast addresses are deemed as any addressing scheme designed to be one-to-many. FCS_NTP_EXT.1.4 The TSF shall support configuration of at least three (3) NTP time sources. Application Note 177 The TOE has to support configuration of at least three (3) time sources though not mandated that the TOE is configured to always use at least 3 time sources. FCS_SSHC_EXT.1 SSH Client Family Behaviour The component in this family addresses the ability for a client to use SSH to protect data between the client and a server using the SSH protocol. Component levelling FCS_SSHC_EXT.1 SSH Client requires that the client side of SSH be implemented as specified. Management: FCS_SSHC_EXT.1 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FCS_SSHC_EXT.1 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of SSH session establishment b) SSH session establishment c) SSH session termination FCS_SSHC_EXT.1 SSH Client Protocol Hierarchical to: No other components Dependencies: FCS_CKM.1Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation Ixia, A Keysight Business Security Target Page 67 of 92 FCS_SSHC_EXT.1.1 The TSF shall implement the SSH protocol that complies with RFC(s) [selection: 4251, 4252, 4253, 4254, 5647, 5656, 6187, 6668, 8332]. Application Note 178 The ST author selects which of the RFCs to which conformance is being claimed. Note that these need to be consistent with selections in later elements of this component (e.g., cryptographic algorithms permitted). RFC 4253 indicates that certain cryptographic algorithms are “REQUIRED”. This means that the implementation must include support, not that the algorithms must be enabled for use. Ensuring that algorithms indicated as “REQUIRED” but not listed in the later elements of this component are implemented is out of scope of the evaluation activity for this requirement. RFC 5647 only applies to the RFC compliant implementation of GCM; a TOE that only implements the “@openssh.com” variant of GCM should not select 5647. aes*- gcm@openssh.com is specified in Section 1.6 of the OpenSSH Protocol Specification (https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/usr.bin/ssh/PROTOCOL?rev=1.31). FCS_SSHC_EXT.1.2 The TSF shall ensure that the SSH protocol implementation supports the following authentication methods as described in RFC 4252: public key- based, [selection: password-based, no other method]. FCS_SSHC_EXT.1.3 The TSF shall ensure that, as described in RFC 4253, packets greater than [assignment: number of bytes] bytes in an SSH transport connection are dropped. Application Note 179 RFC 4253 provides for the acceptance of “large packets” with the caveat that the packets should be of “reasonable length” or dropped. The assignment should be filled in by the ST author with the maximum packet size accepted, thus defining “reasonable length” for the TOE. FCS_SSHC_EXT.1.4 The TSF shall ensure that the SSH transport implementation uses the following encryption algorithms and rejects all other encryption algorithms: [assignment: list of encryption algorithms]. FCS_SSHC_EXT.1.5 The TSF shall ensure that the SSH public-key based authentication implementation uses [selection: ssh-rsa, rsa-sha2-256, rsa-sha2-512, ecdsa-sha2-nistp256, x509v3-ssh-rsa, ecdsa-sha2-nistp384, ecdsa- sha2-nistp521, x509v3-ecdsa-sha2-nistp256, x509v3-ecdsa-sha2- nistp384, x509v3-ecdsa-sha2-nistp521, x509v3-rsa2048-sha256] as its public key algorithm(s) and rejects all other public key algorithms FCS_SSHC_EXT.1.6 The TSF shall ensure that the SSH transport implementation uses [assignment: list of data integrity MAC algorithms] as its data integrity MAC algorithm(s) and rejects all other MAC algorithm(s). FCS_SSHC_EXT.1.7 The TSF shall ensure that [assignment: list of key exchange methods] are the only allowed key exchange methods used for the SSH protocol. FCS_SSHC_EXT.1.8 The TSF shall ensure that within SSH connections the same session keys are used for a threshold of no longer than one hour, and no more than one gigabyte of transmitted data. After either of the thresholds are reached a rekey needs to be performed. Application Note 180 This SFR defines two thresholds - one for the maximum time span the same session keys can be used and the other one for the maximum amount of data that can be transmitted using the same session keys. Both thresholds need to be implemented and a rekey needs to be performed on whichever threshold is reached first. For the maximum transmitted data threshold, the total Ixia, A Keysight Business Security Target Page 68 of 92 incoming and outgoing data needs to be counted. The rekey applies to all session keys (encryption, integrity protection) for incoming and outgoing traffic. It is acceptable for a TOE to implement lower thresholds than the maximum values defined in the SFR. For any configurable threshold related to this requirement the guidance documentation needs to specify how the threshold can be configured. The allowed values must either be specified in the guidance documentation and must be lower or equal to the thresholds specified in this SFR or the TOE must not accept values beyond the thresholds specified in this SFR. FCS_SSHC_EXT.1.9 The TSF shall ensure that the SSH client authenticates the identity of the SSH server using a local database associating each host name with its corresponding public key or [selection: a list of trusted certification authorities, no other methods] as described in RFC 4251 section 4.1. Application Note 181 The list of trusted certification authorities can only be selected if x509v3-ssh-rsa, x509v3-ecdsa- sha2-nistp256, x509v3-ecdsa-sha2-nistp384, x509v3-ecdsa-sha2-nistp521 or x509v3-rsa2048- sha256 are selected in FCS_SSHC_EXT.1.5. FCS_SSHS_EXT.1 SSH Server Protocol Family Behaviour The component in this family addresses the ability for a server to offer SSH to protect data between a client and the server using the SSH protocol. Component levelling FCS_SSHS_EXT.1 SSH Server requires that the server side of SSH be implemented as specified. Management: FCS_SSHS_EXT.1 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FCS_SSHS_EXT.1 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of SSH session establishment b) SSH session establishment c) SSH session termination FCS_SSHS_EXT.1 SSH Server Protocol Hierarchical to: No other components Dependencies: FCS_CKM.1Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) Ixia, A Keysight Business Security Target Page 69 of 92 FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_SSHS_EXT.1.1 The TSF shall implement the SSH protocol that complies with RFC(s) [selection: 4251, 4252, 4253, 4254, 5647, 5656, 6187, 6668, 8332]. Application Note 182 The ST author selects which of the RFCs to which conformance is being claimed. Note that these need to be consistent with selections in later elements of this component (e.g., cryptographic algorithms permitted). RFC 4253 indicates that certain cryptographic algorithms are “REQUIRED”. This means that the implementation must include support, not that the algorithms must be enabled for use. Ensuring that algorithms indicated as “REQUIRED” but not listed in the later elements of this component are implemented is out of scope of the evaluation activity for this requirement. RFC 5647 only applies to the RFC compliant implementation of GCM; a TOE that only implements the “@openssh.com” variant of GCM should not select 5647. aes*- gcm@openssh.com is specified in Section 1.6 of the OpenSSH Protocol Specification (https://cvsweb.openbsd.org/cgi-bin/cvsweb/src/usr.bin/ssh/PROTOCOL?rev=1.31). FCS_SSHS_EXT.1.2 The TSF shall ensure that the SSH protocol implementation supports the following authentication methods as described in RFC 4252: public key- based, password-based. FCS_SSHS_EXT.1.3 The TSF shall ensure that, as described in RFC 4253, packets greater than [assignment: number of bytes] bytes in an SSH transport connection are dropped. Application Note 183 RFC 4253 provides for the acceptance of “large packets” with the caveat that the packets should be of “reasonable length” or dropped. The assignment should be filled in by the ST author with the maximum packet size accepted, thus defining “reasonable length” for the TOE. FCS_SSHS_EXT.1.4 The TSF shall ensure that the SSH transport implementation uses the following encryption algorithms and rejects all other encryption algorithms: [assignment: encryption algorithms]. FCS_SSHS_EXT.1.5 The TSF shall ensure that the SSH public-key based authentication implementation uses [selection: ssh-rsa, rsa-sha2-256, rsa-sha2-512, ecdsa-sha2-nistp256, x509v3-ssh-rsa, ecdsa-sha2-nistp384, ecdsa- sha2-nistp521, x509v3-ecdsa-sha2-nistp256, x509v3-ecdsa-sha2- nistp384, x509v3-ecdsa-sha2-nistp521, x509v3-rsa2048-sha256] as its public key algorithm(s) and rejects all other public key algorithms. FCS_SSHS_EXT.1.6 The TSF shall ensure that the SSH transport implementation uses [assignment: list of MAC algorithms] as its MAC algorithm(s) and rejects all other MAC algorithm(s). FCS_SSHS_EXT.1.7 The TSF shall ensure that [assignment: list of key exchange methods] are the only allowed key exchange methods used for the SSH protocol. FCS_SSHS_EXT.1.8 The TSF shall ensure that within SSH connections the same session keys are used for a threshold of no longer than one hour, and no more Ixia, A Keysight Business Security Target Page 70 of 92 than one gigabyte of transmitted data. After either of the thresholds are reached a rekey needs to be performed. Application Note 184 This SFR defines two thresholds - one for the maximum time span the same session keys can be used and the other one for the maximum amount of data that can be transmitted using the same session keys. Both thresholds need to be implemented and a rekey needs to be performed on whichever threshold is reached first. For the maximum transmitted data threshold, the total incoming and outgoing data needs to be counted. The rekey applies to all session keys (encryption, integrity protection) for incoming and outgoing traffic. It is acceptable for a TOE to implement lower thresholds than the maximum values defined in the SFR. For any configurable threshold related to this requirement the guidance documentation needs to specify how the threshold can be configured. The allowed values must either be specified in the guidance documentation and must be lower or equal to the thresholds specified in this SFR or the TOE must not accept values beyond the thresholds specified in this SFR. FCS_TLSC_EXT TLS Client Protocol Family Behaviour The component in this family addresses the ability for a client to use TLS to protect data between the client and a server using the TLS protocol. Component levelling FCS_TLSC_EXT.1 TLS Client requires that the client side of TLS be implemented as specified. FCS_TLSC_EXT.2 TLS Client requires that the client side of the TLS implementation include mutual authentication. Management: FCS_TLSC_EXT.1, FCS_TLSC_EXT.2 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FCS_TLSC_EXT.1, FCS_TLSC_EXT.2 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of TLS session establishment b) TLS session establishment c) TLS session termination FCS_TLSC_EXT.1 TLS Client Protocol Hierarchical to: No other components Dependencies: FCS_CKM. 1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Ixia, A Keysight Business Security Target Page 71 of 92 Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_TLSC_EXT.1.1 The TSF shall implement [selection: TLS 1.2 (RFC 5246), TLS 1.1 (RFC 4346)] and reject all other TLS and SSL versions. The TLS implementation will support the following ciphersuites: • [assignment: list of optional ciphersuites and reference to RFC in which each is defined]. Application Note 185 The ciphersuites to be tested in the evaluated configuration are limited by this requirement. FCS_TLSC_EXT.1.2 The TSF shall verify that the presented identifier matches the reference identifier per RFC 6125 section 6. Application Note 186 The rules for verification of identify are described in Section 6 of RFC 6125. The reference identifier is established by the user (e.g. entering a URL into a web browser or clicking a link), by configuration (e.g. configuring the name of a mail server or authentication server), or by an application (e.g. a parameter of an API) depending on the application service. Based on a singular reference identifier’s source domain and application service type (e.g. HTTP, SIP, LDAP), the client establishes all reference identifiers which are acceptable, such as a Common Name for the Subject Name field of the certificate and a (case-insensitive) DNS name, URI name, and Service Name for the Subject Alternative Name field. The client then compares this list of all acceptable reference identifiers to the presented identifiers in the TLS server’s certificate. The preferred method for verification is the Subject Alternative Name using DNS names, URI names, or Service Names. Verification using the Common Name is required for the purposes of backwards compatibility. Additionally, support for use of IP addresses in the Subject Name or Subject Alternative name is discouraged as against best practices but may be implemented. Finally, the client should avoid constructing reference identifiers using wildcards. However, if the presented identifiers include wildcards, the client must follow the best practices regarding matching; these best practices are captured in the evaluation activity. FCS_TLSC_EXT.1.3 When establishing a trusted channel, by default the TSF shall not establish a trusted channel if the server certificate is invalid. The TSF shall also [selection: • Not implement any administrator override mechanism • require administrator authorization to establish the connection if the TSF fails to [selection: match the reference identifier, validate certificate path, validate expiration date, determine the revocation status] of the presented server certificate ]. Application Note 187 “Revocation status” refers to a OCSP or CRL response that indicates the presented certificate is invalid. Inability to make a connection to determine validity shall be handled as specified in FIA_X509_EXT.2.2. If TLS is selected in FTP_ITC then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/Rev. Ixia, A Keysight Business Security Target Page 72 of 92 If TLS is selected in FPT_ITT, then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/ITT. FCS_TLSC_EXT.1.4 The TSF shall [selection: not present the Supported Elliptic Curves Extension, present the Supported Elliptic Curves Extension with the following NIST curves: [selection: secp256r1, secp384r1, secp521r1] and no other curves] in the Client Hello. Application Note 188 If ciphersuites with elliptic curves were selected in FCS_TLSC_EXT.1.1, a selection of one or more curves is required. If no ciphersuites with elliptic curves were selected in FCS_TLS_EXT.1.1, then “not present the Supported Elliptic Curves Extension” should be selected. This requirement limits the elliptic curves allowed for authentication and key agreement to the NIST curves from FCS_COP.1/SigGen and FCS_CKM.1 and FCS_CKM.2. This extension is required for clients supporting Elliptic Curve ciphersuites. FCS_TLSC_EXT.2 TLS Client Protocol with Authentication Hierarchical to: FCS_TLSC_EXT.1 TLS Client Protocol Dependencies: FCS_CKM.1Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_TLSC_EXT.2.1 The TSF shall implement [selection: TLS 1.2 (RFC 5246), TLS 1.1 (RFC 4346)] and reject all other TLS and SSL versions. The TLS implementation will support the following ciphersuites: • [assignment: list of optional ciphersuites and reference to RFC in which each is defined]. Application Note 189 The ciphersuites to be tested in the evaluated configuration are limited by this requirement. FCS_TLSC_EXT.2.2 The TSF shall verify that the presented identifier matches the reference identifier per RFC 6125 section 6. Application Note 190 The rules for verification of identify are described in Section 6 of RFC 6125. The reference identifier is established by the user (e.g. entering a URL into a web browser or clicking a link), by configuration (e.g. configuring the name of a mail server or authentication server), or by an application (e.g. a parameter of an API) depending on the application service. Based on a singular reference identifier’s source domain and application service type (e.g. HTTP, SIP, LDAP), the client establishes all reference identifiers which are acceptable, such as a Common Name for the Subject Name field of the certificate and a (case-insensitive) DNS name, URI name, and Service Name for the Subject Alternative Name field. The client then compares this list of all acceptable reference identifiers to the presented identifiers in the TLS server’s certificate. Ixia, A Keysight Business Security Target Page 73 of 92 The preferred method for verification is the Subject Alternative Name using DNS names, URI names, or Service Names. Verification using the Common Name is required for the purposes of backwards compatibility. Additionally, support for use of IP addresses in the Subject Name or Subject Alternative name is discouraged as against best practices but may be implemented. Finally, the client should avoid constructing reference identifiers using wildcards. However, if the presented identifiers include wildcards, the client must follow the best practices regarding matching; these best practices are captured in the evaluation activity. FCS_TLSC_EXT.2.3 When establishing a trusted channel, by default the TSF shall not establish a trusted channel if the server certificate is invalid. The TSF shall also [selection: • Not implement any administrator override mechanism • require administrator authorization to establish the connection if the TSF fails to [selection: match the reference identifier, validate certificate path, validate expiration date, determine the revocation status] of the presented server certificate ]. Application Note 191 “Revocation status” refers to a OCSP or CRL response that indicates the presented certificate is invalid. Inability to make a connection to determine validity shall be handled as specified in FIA_X509_EXT.2.2. If TLS is selected in FTP_ITC then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/Rev. If TLS is selected in FPT_ITT, then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/ITT. FCS_TLSC_EXT.2.4 The TSF shall [selection: not present the Supported Elliptic Curves Extension, present the Supported Elliptic Curves Extension with the following NIST curves: [selection: secp256r1, secp384r1, secp521r1] and no other curves] in the Client Hello. Application Note 192 If ciphersuites with elliptic curves were selected in FCS_TLSC_EXT.1.1, a selection of one or more curves is required. If no ciphersuites with elliptic curves were selected in FCS_TLS_EXT.1.1, then “not present the Supported Elliptic Curves Extension” should be selected. This requirement limits the elliptic curves allowed for authentication and key agreement to the NIST curves from FCS_COP.1/SigGen and FCS_CKM.1 and FCS_CKM.2. This extension is required for clients supporting Elliptic Curve ciphersuites. FCS_TLSC_EXT.2.5 The TSF shall support mutual authentication using X.509v3 certificates. Application Note 193 The use of X.509v3 certificates for TLS is addressed in FIA_X509_EXT.2.1. This requirement adds that this use must include the client must be capable of presenting a certificate to a TLS server for TLS mutual authentication. FCS_TLSS_EXT TLS Server Protocol Family Behaviour Ixia, A Keysight Business Security Target Page 74 of 92 The component in this family addresses the ability for a server to use TLS to protect data between a client and the server using the TLS protocol. Component levelling FCS_TLSS_EXT.1 TLS Server requires that the server side of TLS be implemented as specified. FCS_TLSS_EXT.2: TLS Server requires the mutual authentication be included in the TLS implementation. Management: FCS_TLSS_EXT.1, FCS_TLSS_EXT.2 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FCS_TLSS_EXT.1, FCS_TLSS_EXT.2 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Failure of TLS session establishment b) TLS session establishment c) TLS session termination FCS_TLSS_EXT.1 TLS Server Protocol Hierarchical to: No other components Dependencies: FCS_CKM.1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_TLSS_EXT.1.1 The TSF shall implement [selection: TLS 1.2 (RFC 5246), TLS 1.1 (RFC 4346)] and reject all other TLS and SSL versions. The TLS implementation will support the following ciphersuites: • [assignment: list of optional ciphersuites and reference to RFC in which each is defined]. Application Note 194 The ciphersuites to be tested in the evaluated configuration are limited by this requirement. FCS_TLSS_EXT.1.2 The TSF shall deny connections from clients requesting SSL 2.0, SSL 3.0, TLS 1.0 and [selection: TLS 1.1, TLS 1.2, none]. Application Note 195 All SSL versions and TLS v1.0 are denied. Any TLS versions not selected in FCS_TLSS_EXT.1.1 should be selected here. (If “none” is the selection for this element then the ST author may omit the words “and none”.) Ixia, A Keysight Business Security Target Page 75 of 92 FCS_TLSS_EXT.1.3 The TSF shall [selection: perform RSA key establishment with key size [selection: 2048 bits, 3072 bits, 4096 bits]; generate EC Diffie-Hellman parameters over NIST curves [selection: secp256r1, secp384r1, secp521r1] and no other curves; generate Diffie-Hellman parameters of size [selection: 2048 bits, 3072 bits]]. Application Note 196 The assignments will be filled in based on the assignments performed in FCS_TLSS_EXT.1.1. FCS_TLSS_EXT.2 TLS Server Protocol with mutual authentication Hierarchical to: FCS_TLSS_EXT.1 TLS Server Protocol Dependencies: FCS_CKM.1 Cryptographic Key Generation FCS_CKM.2 Cryptographic Key Establishment FCS_COP.1/DataEncryption Cryptographic operation (AES Data encryption/decryption) FCS_COP.1/SigGen Cryptographic operation (Signature Generation and Verification) FCS_COP.1/Hash Cryptographic operation (Hash Algorithm) FCS_COP.1/KeyedHash Cryptographic operation (Keyed Hash Algorithm) FCS_RBG_EXT.1 Random Bit Generation FCS_TLSS_EXT.2.1 The TSF shall implement [selection: TLS 1.2 (RFC 5246), TLS 1.1 (RFC 4346)] and reject all other TLS and SSL versions. The TLS implementation will support the following ciphersuites: • [assignment: list of optional ciphersuites and reference to RFC in which each is defined]. Application Note 197 The ciphersuites to be tested in the evaluated configuration are limited by this requirement. FCS_TLSS_EXT.2.2 The TSF shall deny connections from clients requesting SSL 2.0, SSL 3.0, TLS 1.0 and [selection: TLS 1.1, TLS 1.2, none]. Application Note 198 All SSL versions and TLS v1.0 are denied. Any TLS versions not selected in FCS_TLSS_EXT.1.1 should be selected here. (If “none” is the selection for this element then the ST author may omit the words “and none”.) FCS_TLSS_EXT.2.3 The TSF shall [selection: perform RSA key establishment with key size [selection: 2048 bits, 3072 bits, 4096 bits]; generate EC Diffie-Hellman parameters over NIST curves [selection: secp256r1, secp384r1, secp521r1] and no other curves; generate Diffie-Hellman parameters of size [selection: 2048 bits, 3072 bits]]. Application Note 199 The assignments will be filled in based on the assignments performed in FCS_TLSS_EXT.2.1. FCS_TLSS_EXT.2.4 The TSF shall support mutual authentication of TLS clients using X.509v3 certificates. Application Note 200 The use of X.509v3 certificates for TLS is addressed in FIA_X509_EXT.2.1. This requirement adds that this use must include support for client-side certificates for TLS mutual authentication. Ixia, A Keysight Business Security Target Page 76 of 92 FCS_TLSS_EXT.2.5 When establishing a trusted channel, by default the TSF shall not establish a trusted channel if the client certificate is invalid. The TSF shall also [selection: • Not implement any administrator override mechanism • require administrator authorization to establish the connection if the TSF fails to [selection: match the reference identifier, validate certificate path, validate expiration date, determine the revocation status] of the presented client certificate ]. Application Note 201 “Revocation status” refers to a OCSP or CRL response that indicates the presented certificate is invalid. Inability to make a connection to determine validity shall be handled as specified in FIA_X509_EXT.2.2. If TLS is selected in FTP_ITC then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/Rev. If TLS is selected in FPT_ITT, then certificate validity is tested in accordance with testing performed for FIA_X509_EXT.1/ITT. FCS_TLSS_EXT.2.6 The TSF shall not establish a trusted channel if the distinguished name (DN) or Subject Alternative Name (SAN) contained in a certificate does not match the expected identifier for the client. Application Note 202 This requirement only applies to those TOEs performing mutually-authenticated TLS (FCS_TLSS_EXT.2.4). The peer identifier may be in the Subject field or the Subject Alternative Name extension of the certificate. The expected identifier may either be configured, may be compared to the Domain Name, IP address, username, or email address used by the peer, or may be passed to a directory server for comparison. Identification and Authentication (FIA) Password Management (FIA_PMG_EXT) Family Behaviour The TOE defines the attributes of passwords used by administrative users to ensure that strong passwords and passphrases can be chosen and maintained. Component levelling FIA_PMG_EXT.1 Password management requires the TSF to support passwords with varying composition requirements, minimum lengths, maximum lifetime, and similarity constraints. Management: FIA_PMG_EXT.1 No management functions. Audit: FIA_PMG_EXT.1 No specific audit requirements. Ixia, A Keysight Business Security Target Page 77 of 92 FIA_PMG_EXT.1 Password Management FIA_PMG_EXT.1 Password Management Hierarchical to: No other components. Dependencies: No other components. FIA_PMG_EXT.1.1 The TSF shall provide the following password management capabilities for administrative passwords: c) Passwords shall be able to be composed of any combination of upper and lower case letters, numbers, and the following special characters: [selection: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”, [assignment: other characters]]; d) Minimum password length shall be configurable to between [assignment: minimum number of characters supported by the TOE] and [assignment: number of characters greater than or equal to 15] characters. Application Note 203 The ST author selects the special characters that are supported by the TOE. They may optionally list additional special characters supported using the assignment. "Administrative passwords" refers to passwords used by Administrators at the local console, over protocols that support passwords, such as SSH and HTTPS, or to grant configuration data that supports other SFRs in the Security Target. The second assignment should be configured with the largest minimum password length the Security Administrator can configure. User Identification and Authentication (FIA_UIA_EXT) Family Behaviour The TSF allows certain specified actions before the non-TOE entity goes through the identification and authentication process. Component levelling FIA_UIA_EXT.1 User Identification and Authentication requires Administrators (including remote Administrators) to be identified and authenticated by the TOE, providing assurance for that end of the communication path. It also ensures that every user is identified and authenticated before the TOE performs any mediated functions Management: FIA_UIA_EXT.1 The following actions could be considered for the management functions in FMT: a) Ability to configure the list of TOE services available before an entity is identified and authenticated Audit: FIA_UIA_EXT.N The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) All use of the identification and authentication mechanism Ixia, A Keysight Business Security Target Page 78 of 92 b) Provided user identity, origin of the attempt (e.g. IP address) FIA_UIA_EXT.1 User Identification and Authentication FIA_UIA_EXT.1 User Identification and Authentication Hierarchical to: No other components. Dependencies: FTA_TAB.1 Default TOE Access Banners FIA_UIA_EXT.1.1 The TSF shall allow the following actions prior to requiring the non-TOE entity to initiate the identification and authentication process: • Display the warning banner in accordance with FTA_TAB.1; • [selection: no other actions, automated generation of cryptographic keys, [assignment: list of services, actions performed by the TSF in response to non-TOE requests]]. FIA_UIA_EXT.1.2 The TSF shall require each administrative user to be successfully identified and authenticated before allowing any other TSF-mediated actions on behalf of that administrative user. Application Note 204 This requirement applies to users (Administrators and external IT entities) of services available from the TOE directly, and not services available by connecting through the TOE. While it should be the case that few or no services are available to external entities prior to identification and authentication, if there are some available (perhaps ICMP echo) these should be listed in the assignment statement; if automated generation of cryptographic keys is supported without administrator authentication, the option "automated generation of cryptographic keys" should be selected; otherwise “no other actions” should be selected. Authentication can be password-based through the local console or through a protocol that supports passwords (such as SSH), or be certificate based (such as SSH, TLS). For communications with external IT entities (an audit server, for instance), such connections must be performed in accordance with FTP_ITC.1, whose protocols perform identification and authentication. This means that such communications (e.g., establishing the IPsec connection to the authentication server) would not have to be specified in the assignment, since establishing the connection “counts” as initiating the identification and authentication process. According to the application note for FMT_SMR.2, for distributed TOEs at least one TOE component has to support the authentication of Security Administrators according to FIA_UIA_EXT.1 and FIA_UAU_EXT.2 but not necessarily all TOE components. In case not all TOE components support this way of authentication for Security Administrators the TSS shall describe how Security Administrators are authenticated and identified. User authentication (FIA_UAU_EXT) Family Behaviour Provides for a locally based administrative user authentication mechanism Component levelling Ixia, A Keysight Business Security Target Page 79 of 92 FIA_UAU_EXT.2 The password-based authentication mechanism provides administrative users a locally based authentication mechanism. Management: FIA_UAU_EXT.2 The following actions could be considered for the management functions in FMT: a) None Audit: FIA_UAU_EXT.2 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) Minimal: All use of the authentication mechanism FIA_UAU_EXT.2 Password-based Authentication Mechanism FIA_UAU_EXT.2 Password-based Authentication Mechanism Hierarchical to: No other components. Dependencies: No other components. FIA_UAU_EXT.2.1 The TSF shall provide a local password-based authentication mechanism, [selection: [assignment: other authentication mechanism(s)], no other authentication mechanism] to perform local administrative user authentication. Application Note 205 The assignment should be used to identify any additional local authentication mechanisms supported. Local authentication mechanisms are defined as those that occur through the local console; remote administrative sessions (and their associated authentication mechanisms) are specified in FTP_TRP.1/Admin. According to the application note for FMT_SMR.2, for distributed TOEs at least one TOE component has to support the authentication of Security Administrators according to FIA_UIA_EXT.1 and FIA_UAU_EXT.2 but not necessarily all TOE components. In case not all TOE components support this way of authentication for Security Administrators the TSS shall describe how Security Administrators are authenticated and identified. Authentication using X.509 certificates (FIA_X509_EXT) Family Behaviour This family defines the behaviour, management, and use of X.509 certificates for functions to be performed by the TSF. Components in this family require validation of certificates according to a specified set of rules, use of certificates for authentication for protocols and integrity verification, and the generation of certificate requests. Component levelling Ixia, A Keysight Business Security Target Page 80 of 92 FIA_X509_EXT.1 X509 Certificate Validation, requires the TSF to check and validate certificates in accordance with the RFCs and rules specified in the component. FIA_X509_EXT.2 X509 Certificate Authentication, requires the TSF to use certificates to authenticate peers in protocols that support certificates, as well as for integrity verification and potentially other functions that require certificates. FIA_X509_EXT.3 X509 Certificate Requests, requires the TSF to be able to generate Certificate Request Messages and validate responses. Management: FIA_X509_EXT.1, FIA_X509_EXT.2, FIA_X509_EXT.3 The following actions could be considered for the management functions in FMT: a) Remove imported X.509v3 certificates b) Approve import and removal of X.509v3 certificates c) Initiate certificate requests Audit: FIA_X509_EXT.1, FIA_X509_EXT.2, FIA_X509_EXT.3 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) Minimal: No specific audit requirements are specified. FIA_X509_EXT.1 X.509 Certificate Validation FIA_X509_EXT.1 X.509 Certificate Validation Hierarchical to: No other components Dependencies: FIA_X509_EXT.2 X.509 Certificate Authentication FIA_X509_EXT.1.1 The TSF shall validate certificates in accordance with the following rules: • RFC 5280 certificate validation and certification path validation. • The certification path must terminate with a trusted CA certificate designated as a trust anchor. • The TSF shall validate a certification path by ensuring that all CA certificates in the certification path contain the basicConstraints extension with the CA flag set to TRUE. • The TSF shall validate the revocation status of the certificate using [selection: the Online Certificate Status Protocol (OCSP) as specified in RFC 6960, a Certificate Revocation List (CRL) as specified in RFC 5280 Section 6.3, Certificate Revocation List (CRL) as specified in RFC 5759 Section 5, no revocation method] • The TSF shall validate the extendedKeyUsage field according to the following rules: [assignment: rules that govern contents of the extendedKeyUsage field that need to be verified]. Application Note 206 Ixia, A Keysight Business Security Target Page 81 of 92 FIA_X509_EXT.1.1 lists the rules for validating certificates. The ST author selects whether revocation status is verified using OCSP or CRLs. If the TOE is distributed and X.509 based authentication is being used to authenticate the protocol selected in FPT_ITT.1, certificate revocation checking is optional. It is optional because there are additional requirements surrounding the enabling and disabling of the FPT_ITT channel defined in FCO_CPC_EXT.1. If revocation is not supported the ST author selects no revocation method. The ST author fills in the assignment with rules that may apply to other requirements in the ST. For instance, if a protocol such as TLS that uses certificates is specified in the ST, then certain values for the extendedKeyUsage field (e.g., “Server Authentication Purpose”) could be specified. FIA_X509_EXT.1.2 The TSF shall only treat a certificate as a CA certificate if the basicConstraints extension is present and the CA flag is set to TRUE. Application Note 207 This requirement applies to certificates that are used and processed by the TSF and restricts the certificates that may be added as trusted CA certificates. FIA_X509_EXT.2 X509 Certificate Authentication FIA_X509_EXT.2 X.509 Certificate Authentication Hierarchical to: No other components Dependencies: FIA_X509_EXT.1 X.509 Certificate Validation FIA_X509_EXT.2.1 The TSF shall use X.509v3 certificates as defined by RFC 5280 to support authentication for [selection: DTLS, HTTPS, IPsec, TLS, SSH, [assignment: other protocols], no protocols], and [selection: code signing for system software updates, code signing for integrity verification, [assignment: other uses], no additional uses]. Application Note 208 If the TOE specifies the implementation of communications protocols that perform peer authentication using certificates, the ST author either selects or assigns the protocols that are specified; otherwise, they select “no protocols”. Protocols that do not use X.509 based peer authentication include SSH, where ssh-rsa, ecdsa-sha2-nistp256, ecdsa-sha2-nistp384, and/or ecdsa-sha2-nistp521 are selected. The TOE may also use certificates for other purposes; the second selection and assignment are used to specify these cases. FIA_X509_EXT.2.2 When the TSF cannot establish a connection to determine the validity of a certificate, the TSF shall [selection: allow the Administrator to choose whether to accept the certificate in these cases, accept the certificate, not accept the certificate]. Application Note 209 Often a connection must be established to check the revocation status of a certificate - either to download a CRL or to perform a lookup using OCSP. The selection is used to describe the behaviour in the event that such a connection cannot be established (for example, due to a network error). If the TOE has determined the certificate valid according to all other rules in FIA_X509_EXT.1, the behaviour indicated in the selection determines the validity. The TOE must not accept the certificate if it fails any of the other validation rules in FIA_X509_EXT.1. If the Administrator-configured option is selected by the ST Author, the ST Author also selects the corresponding function in FMT_SMF.1. If the TOE is distributed and FIA_X509_EXT.1/ITT is selected, then certificate revocation checking is optional. This is due to additional authorization actions being performed in the Ixia, A Keysight Business Security Target Page 82 of 92 enabling and disabling of the intra-TOE trusted channel as defined in FCO_CPC_EXT.1. In this case, a connection is not required to determine certificate validity and this SFR is trivially satisfied. FIA_X509_EXT.3 X.509 Certificate Requests FIA_X509_EXT.3 X.509 Certificate Requests Hierarchical to: No other components Dependencies: FCS_CKM.1 Cryptographic Key Generation FIA_X509_EXT.1 X.509 Certificate Validation FIA_X509_EXT.3.1 The TSF shall generate a Certificate Request as specified by RFC 2986 and be able to provide the following information in the request: public key and [selection: device-specific information, Common Name, Organization, Organizational Unit, Country, [assignment: other information]]. FIA_X509_EXT.3.2 The TSF shall validate the chain of certificates from the Root CA upon receiving the CA Certificate Response. Protection of the TSF (FPT) Protection of TSF Data (FPT_SKP_EXT) Family Behaviour Components in this family address the requirements for managing and protecting TSF data, such as cryptographic keys. This is a new family modelled after the FPT_PTD Class. Component levelling FPT_SKP_EXT.1 Protection of TSF Data (for reading all symmetric keys), requires preventing symmetric keys from being read by any user or subject. It is the only component of this family. Management: FPT_SKP_EXT.1 The following actions could be considered for the management functions in FMT: a) There are no management activities foreseen. Audit: FPT_SKP_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) There are no auditable events foreseen. Ixia, A Keysight Business Security Target Page 83 of 92 FPT_SKP_EXT.1 Protection of TSF Data (for reading of all symmetric keys) FPT_SKP_EXT.1 Protection of TSF Data (for reading of all symmetric keys) Hierarchical to: No other components. Dependencies: No other components. FPT_SKP_EXT.1.1 The TSF shall prevent reading of all pre-shared keys, symmetric keys, and private keys. Application Note 210 The intent of this requirement is for the device to protect keys, key material, and authentication credentials from unauthorized disclosure. This data should only be accessed for the purposes of their assigned security functionality, and there is no need for them to be displayed/accessed at any other time. This requirement does not prevent the device from providing indication that these exist, are in use, or are still valid. It does, however, restrict the reading of the values outright. Protection of Administrator Passwords (FPT_APW_EXT) FPT_APW_EXT.1 Protection of Administrator Passwords Family Behaviour Components in this family ensure that the TSF will protect plaintext credential data such as passwords from unauthorized disclosure. Component levelling FPT_APW_EXT.1 Protection of Administrator passwords requires that the TSF prevent plaintext credential data from being read by any user or subject. Management: FPT_APW_EXT.1 The following actions could be considered for the management functions in FMT: a) No management functions. Audit: FPT_APW_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) No audit necessary. FPT_APW_EXT.1 Protection of Administrator Passwords Hierarchical to: No other components Dependencies: No other components. FPT_APW_EXT.1.1 The TSF shall store passwords in non-plaintext form. FPT_APW_EXT.1.2 The TSF shall prevent the reading of plaintext passwords. Ixia, A Keysight Business Security Target Page 84 of 92 Application Note 211 The intent of the requirement is that raw password authentication data is not stored in the clear, and that no user or Administrator is able to read the plaintext password through “normal” interfaces. An all-powerful Administrator could directly read memory to capture a password but is trusted not to do so. Passwords should be obscured during entry on the local console in accordance with FIA_UAU.7. TSF Self-Test (FPT_TST_EXT) FPT_TST_EXT.1 TSF Testing Family Behaviour Components in this family address the requirements for self-testing the TSF for selected correct operation. Component levelling FPT_TST_EXT.1 TSF Self-Test requires a suite of self-tests to be run during initial start-up in order to demonstrate correct operation of the TSF. FPT_TST_EXT.2 Self-tests based on certificates applies when using certificates as part of self- test, and requires that the self-test fails if a certificate is invalid. Management: FPT_TST_EXT.1, FPT_TST_EXT.2 The following actions could be considered for the management functions in FMT: a) No management functions. Audit: FPT_TST_EXT.1, FPT_TST_EXT.2 The following actions should be considered for audit if FAU_GEN Security audit data generation is included in the PP/ST: a) Indication that TSF self-test was completed b) Failure of self-test FPT_TST_EXT.1 TSF testing Hierarchical to: No other components. Dependencies: No other components. FPT_TST_EXT.1.1 The TSF shall run a suite of the following self-tests [selection: during initial start-up (on power on), periodically during normal operation, at the request of the authorised user, at the conditions [assignment: conditions under which self-tests should occur]] to demonstrate the correct operation of the TSF: [assignment: list of self-tests run by the TSF]. Application Note 212 Ixia, A Keysight Business Security Target Page 85 of 92 It is expected that self-tests are carried out during initial start-up (on power on). Other options should only be used if the developer can justify why they are not carried out during initial start-up. It is expected that at least self-tests for verification of the integrity of the firmware and software as well as for the correct operation of cryptographic functions necessary to fulfil the SFRs will be performed. If not all self-tests are performed during start-up multiple iterations of this SFR are used with the appropriate options selected. In future versions of this cPP the suite of self-tests will be required to contain at least mechanisms for measured boot including self-tests of the components which perform the measurement. Non-distributed TOEs may internally consist of several components that contribute to enforcing SFRs. Self-testing shall cover all components that contribute to enforcing SFRs and verification of integrity shall cover all software that contributes to enforcing SFRs on all components. For distributed TOEs all TOE components have to perform self-tests. This does not necessarily mean that each TOE component has to carry out the same self-tests: the ST describes the applicability of the selection (i.e. when self-tests are run) and the final assignment (i.e. which self- tests are carried out) to each TOE component. Application Note 213 If certificates are used by the self-test mechanism (e.g. for verification of signatures for integrity verification), certificates are validated in accordance with FIA_X509_EXT.1 and should be selected in FIA_X509_EXT.2.1. Additionally, FPT_TST_EXT.2 must be included in the ST. FPT_TST_EXT.2 Self-tests based on certificates Hierarchical to: No other components. Dependencies: No other components. FPT_TST_EXT.2.1 The TSF shall fail self-testing if a certificate is used for self-tests and the corresponding certificate is deemed invalid. Application Note 214 Certificates may optionally be used for self-tests (FPT_TST_EXT.1.1). This element must be included in the ST if certificates are used for self-tests. If “code signing for integrity verification” is selected in FIA_X509_EXT.2.1, FPT_TST_EXT.2 must be included in the ST. Validity is determined by the certification path and the expiration date. If the self-test is executed as part of TOE initialization (e.g. boot), there is no expectation of a revocation status check as the necessary functionality, configuration, or infrastructure required to perform such check might not be available. Trusted Update (FPT_TUD_EXT) Family Behaviour Components in this family address the requirements for updating the TOE firmware and/or software. Component levelling Ixia, A Keysight Business Security Target Page 86 of 92 FPT_TUD_EXT.1 Trusted Update requires management tools be provided to update the TOE firmware and software, including the ability to verify the updates prior to installation. FPT_TUD_EXT.2 Trusted update based on certificates applies when using certificates as part of trusted update and requires that the update does not install if a certificate is invalid. Management: FPT_TUD_EXT.1 The following actions could be considered for the management functions in FMT: a) Ability to update the TOE and to verify the updates b) Ability to update the TOE and to verify the updates using the digital signature capability (FCS_COP.1/SigGen) and [selection: no other functions, [assignment: other cryptographic functions (or other functions) used to support the update capability]] c) Ability to update the TOE, and to verify the updates using [selection: digital signature, published hash, no other mechanism] capability prior to installing those updates Audit: FPT_TUD_EXT.1, FPT_TUD_EXT.2 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) Initiation of the update process. b) Any failure to verify the integrity of the update FPT_TUD_EXT.1 Trusted Update FPT_TUD_EXT.1 Trusted update Hierarchical to: No other components Dependencies: FCS_COP.1/SigGen Cryptographic operation (for Cryptographic Signature and Verification), or FCS_COP.1/Hash Cryptographic operation (for cryptographic hashing) FPT_TUD_EXT.1.1 The TSF shall provide [assignment: Administrators] the ability to query the currently executing version of the TOE firmware/software and [selection: the most recently installed version of the TOE firmware/software; no other TOE firmware/software version]. Application Note 215 If a trusted update can be installed on the TOE with a delayed activation the version of both the currently executing image and the installed but inactive image must be provided. In this case the option 'the most recently installed version of the TOE firmware/software' needs to be chosen from the selection in FPT_TUD_EXT.1.1 and the TSS needs to describe how and when the inactive version becomes active. If all trusted updates become active as part of the installation process, only the currently executing version needs to be provided. In this case the option 'no other TOE firmware/software version' shall be chosen from the selection in FPT_TUD_EXT.1.1.. For a distributed TOE, the method of determining the installed versions on each component of the TOE is described in the operational guidance. FPT_TUD_EXT.1.2 The TSF shall provide [assignment: Administrators] the ability to manually initiate updates to TOE firmware/software and [selection: Ixia, A Keysight Business Security Target Page 87 of 92 support automatic checking for updates, support automatic updates, no other update mechanism]. Application Note 216 The selection in FPT_TUD_EXT.1.2 distinguishes the support of automatic checking for updates and support of automatic updates. The first option refers to a TOE that checks whether a new update is available, communicates this to the Administrator (e.g. through a message during an Administrator session, through log files) but requires some action by the Administrator to actually perform the update. The second option refers to a TOE that checks for updates and automatically installs them upon availability. The TSS explains what actions are involved in the TOE support when using the “support automatic checking for updates” or “support automatic updates” selections. When published hash values (see FPT_TUD_EXT.1.3) are used to protect the trusted update mechanism, the TOE must not automatically download the update file(s) together with the hash value (either integrated in the update file(s) or separately) and automatically install the update without any active authorization by the Security Administrator, even when the calculated hash value matches the published hash value. When using published hash values to protect the trusted update mechanism, the option “support of automatic updates” must not be used (automated checking for updates is permitted, though). The TOE may automatically download the update file(s) themselves but not to the hash value. For the published hash approach, it is intended that a Security Administrator is always required to give active authorisation for installation of an update (as described in more detail under FPT_TUD_EXT.1.3) below. Due to this, the type of update mechanism is regarded as “manually initiated update”, even if the update file(s) may be downloaded automatically. A fully automated approach (without Security Administrator intervention) can only be used when “digital signature mechanism” is selected in FPT_TUD_EXT.1.3 below. FPT_TUD_EXT.1.3 The TSF shall provide means to authenticate firmware/software updates to the TOE using a [selection: digital signature mechanism, published hash] prior to installing those updates. Application Note 217 The digital signature mechanism referenced in the selection of FPT_TUD_EXT.1.3 is one of the algorithms specified in FCS_COP.1/SigGen. The published hash referenced in FPT_TUD_EXT.1.3 is generated by one of the functions specified in FCS_COP.1/Hash. The ST author should choose the mechanism implemented by the TOE; it is acceptable to implement both mechanisms. When published hash values are used to secure the trusted update mechanism, an active authorization of the update process by the Security Administrator is always required. The secure transmission of an authentic hash value from the developer to the Security Administrator is one of the key factors to protect the trusted update mechanism when using published hashes and the guidance documentation needs to describe how this transfer has to be performed. For the verification of the trusted hash value by the Security Administrator different use cases are possible. The Security Administrator could obtain the published hash value as well as the update file(s) and perform the verification outside the TOE while the hashing of the update file(s) could be done by the TOE or by other means. Authentication as Security Administrator and initiation of the trusted update would in this case be regarded as “active authorization” of the trusted update. Alternatively, the Administrator could provide the TOE with the published hash value together with the update file(s) and the hashing and hash comparison is performed by the TOE. In case of successful hash verification, the TOE can perform the update without any additional step by the Security Administrator. Authentication as Security Administrator and sending the hash value to the TOE is regarded as “active authorization” of the trusted update (in case of successful hash verification), because the Administrator is expected to load the hash value only to the TOE when intending to perform the update. As long as the transfer of the hash value to the TOE is performed by the Security Administrator, loading of the update file(s) can be performed by the Security Administrator or can be automatically downloaded by the TOE from a repository. Ixia, A Keysight Business Security Target Page 88 of 92 If the digital signature mechanism is selected, the verification of the signature shall be performed by the TOE itself. For the published hash option, the verification can be done by the TOE itself as well as by the Security Administrator. In the latter case use of TOE functionality for the verification is not mandated, so verification could be done using non-TOE functionality of the device containing the TOE or without using the device containing the TOE. For distributed TOEs all TOE components shall support Trusted Update. The verification of the signature or hash on the update shall either be done by each TOE component itself (signature verification) or for each component (hash verification). Updating a distributed TOE might lead to the situation where different TOE components are running different software versions. Depending on the differences between the different software versions the impact of a mixture of different software versions might be no problem at all or critical to the proper functioning of the TOE. The TSS shall detail the mechanisms that support the continuous proper functioning of the TOE during trusted update of distributed TOEs. Application Note 218 Future versions of this cPP will mandate the use of a digital signature mechanism for trusted updates. Application Note 219 If certificates are used by the update verification mechanism, certificates are validated in accordance with FIA_X509_EXT.1 and should be selected in FIA_X509_EXT.2.1. Additionally, FPT_TUD_EXT.2 must be included in the ST. Application Note 220 “Update” in the context of this SFR refers to the process of replacing a non-volatile, system resident software component with another. The former is referred to as the NV image, and the latter is the update image. While the update image is typically newer than the NV image, this is not a requirement. There are legitimate cases where the system owner may want to rollback a component to an older version (e.g. when the component manufacturer releases a faulty update, or when the system relies on an undocumented feature no longer present in the update). Likewise, the owner may want to update with the same version as the NV image to recover from faulty storage. All discrete firmware and software elements (e.g. applications, drivers, and kernel) of the TSF need to be protected, i.e. they should either be digitally signed by the corresponding manufacturer and subsequently verified by the mechanism performing the update or a hash should be published for them which needs to be verified before the update. FPT_TUD_EXT.2 Trusted Update based on certificates FPT_TUD_EXT.2 Trusted update based on certificates Hierarchical to: No other components Dependencies: FPT_TUD_EXT.1 FPT_TUD_EXT.2.1 The TSF shall not install an update if the code signing certificate is deemed invalid. FPT_TUD_EXT.2.2 When the certificate is deemed invalid because the certificate has expired, the TSF shall [selection: allow the Administrator to choose whether to accept the certificate in these cases, accept the certificate, not accept the certificate]. Application Note 221 Certificates may optionally be used for code signing of system software updates (FPT_TUD_EXT.1.3). This element must be included in the ST if certificates are used for Ixia, A Keysight Business Security Target Page 89 of 92 validating updates. If “code signing for system software updates” is selected in FIA_X509_EXT.2.1, FPT_TUD_EXT.2 must be included in the ST. Validity is determined by the certification path, the expiration date, and the revocation status in accordance with FIA_X509_EXT.1. For expired certificates the author of the ST selects whether the certificate shall be accepted, rejected or the choice is left to the Administrator to accept or reject the certificate. Time stamps (FPT_STM_EXT) Family Behaviour Components in this family extend FPT_STM requirements by describing the source of time used in timestamps. Component levelling FPT_STM_EXT.1 Reliable Time Stamps is hierarchic to FPT_STM.1: it requires that the TSF provide reliable time stamps for TSF and identifies the source of the time used in those timestamps. Management: FPT_STM_EXT.1 The following actions could be considered for the management functions in FMT: a) Management of the time b) Administrator setting of the time. Audit: FTA_SSL_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: a) Discontinuous changes to the time. FPT_STM_EXT.1 Reliable Time Stamps FPT_STM_EXT.1 Reliable Time Stamps Hierarchical to: No other components Dependencies: No other components. FPT_STM_EXT.1.1 The TSF shall be able to provide reliable time stamps for its own use. FPT_STM_EXT.1.2 The TSF shall [selection: allow the Security Administrator to set the time, synchronise time with an NTP server]. Application Note 222 Reliable time stamps are expected to be used with other TSF, e.g. for the generation of audit data to allow the Security Administrator to investigate incidents by checking the order of events and to determine the actual local time when events occurred. The decision about the required level of accuracy of that information is up to the Administrator. The TOE depends on time and date information, either provided by a local real-time clock that is manually managed by the Security Administrator or through the use of one or more external NTP Ixia, A Keysight Business Security Target Page 90 of 92 servers. The corresponding option(s) shall be chosen from the selection in FPT_STM_EXT.1.2. The use the automatic synchronisation with an external NTP server is recommended but not mandated. Note that for the communication with an external NTP server, FCS_NTP_EXT.1 shall be claimed. The ST author describes in the TSS how the external time and date information is received by the TOE and how this information is maintained. The term “reliable time stamps” refers to the strict use of the time and date information, that is provided, and the logging of all discontinuous changes to the time settings including information about the old and new time. With this information, the real time for all audit data can be determined. Note, that all discontinuous time changes, Administrator actuated or changed via an automated process, must be audited. No audit is needed when time is changed via use of kernel or system facilities – such as daytime (3) – that exhibit no discontinuities in time. For distributed TOEs it is expected that the Security Administrator ensures synchronization between the time settings of different TOE components. All TOE components shall either be in sync (e.g. through synchronisation between TOE components or through synchronisation of different TOE components with external NTP servers) or the offset should be known to the Administrator for every pair of TOE components. This includes TOE components synchronized to different time zones. TOE Access (FTA) TSF-initiated Session Locking (FTA_SSL_EXT) Family Behaviour Components in this family address the requirements for TSF-initiated and user-initiated locking, unlocking, and termination of interactive sessions. The extended FTA_SSL_EXT family is based on the FTA_SSL family. Component levelling FTA_SSL_EXT.1 TSF-initiated session locking, requires system initiated locking of an interactive session after a specified period of inactivity. It is the only component of this family. Management: FTA_SSL_EXT.1 The following actions could be considered for the management functions in FMT: c) Specification of the time of user inactivity after which lock-out occurs for an individual user. Audit: FTA_SSL_EXT.1 The following actions should be auditable if FAU_GEN Security audit data generation is included in the PP/ST: b) Any attempts at unlocking an interactive session. FTA_SSL_EXT.1 TSF-initiated Session Locking FTA_SSL_EXT.1 TSF-initiated Session Locking Ixia, A Keysight Business Security Target Page 91 of 92 Hierarchical to: No other components Dependencies: FIA_UAU.1 Timing of authentication FTA_SSL_EXT.1.1 The TSF shall, for local interactive sessions, [selection: • lock the session - disable any activity of the Administrator’s data access/display devices other than unlocking the session, and requiring that the Administrator re-authenticate to the TSF prior to unlocking the session; • terminate the session] after a Security Administrator-specified time period of inactivity. Communication (FCO) Communication Partner Control (FCO_CPC_EXT) Family Behaviour This family is used to define high-level constraints on the ways that partner IT entities communicate. For example, there may be constraints on when communication channels can be used, how they are established, and links to SFRs expressing lower-level security properties of the channels. Component levelling FCO_CPC_EXT.1 Component Registration Channel Definition, requires the TSF to support a registration channel for joining together components of a distributed TOE, and to ensure that the availability of this channel is under the control of an Administrator. It also requires statement of the type of channel used (allowing specification of further lower-level security requirements by reference to other SFRs). Management: FCO_CPC_EXT.1 No separate management functions are required. Note that elements of the SFR already specify certain constraints on communication in order to ensure that the process of forming a distributed TOE is a controlled activity. Audit: FCO_CPC_EXT.1 The following actions should be auditable if FCO_CPC_EXT.1 is included in the PP/ST: a) Enabling communications between a pair of components as in FCO_CPC_EXT.1.1 (including identities of the endpoints). b) Disabling communications between a pair of components as in FCO_CPC_EXT.1.3 (including identity of the endpoint that is disabled). If the required types of channel in FCO_CPC_EXT.1.2 are specified by using other SFRs then the use of the registration channel may be sufficiently covered by the audit requirements on those SFRs: otherwise a separate audit requirement to audit the use of the channel should be identified for FCO_CPC_EXT.1. Ixia, A Keysight Business Security Target Page 92 of 92 FCO_CPC_EXT.1 Component Registration Channel Definition FCO_CPC_EXT.1 Component Registration Channel Definition Hierarchical to: No other components. Dependencies: No other components. FCO_CPC_EXT.1.1 The TSF shall require a Security Administrator to enable communications between any pair of TOE components before such communication can take place. FCO_CPC_EXT.1.2 The TSF shall implement a registration process in which components establish and use a communications channel that uses [assignment: list of different types of channel given in the form of a selection] for at least [assignment: type of data for which the channel must be used]. FCO_CPC_EXT.1.3 The TSF shall enable a Security Administrator to disable communications between any pair of TOE components. Application Note 223 This SFR is generally applied to a distributed TOE in order to control the process of creating the distributed TOE from its components by means of a registration process in which a component joins the distributed TOE by registering with an existing component of the distributed TOE. When creating the TSF from the initial pair of components, either of these components may be identified as the TSF for the purposes of satisfying the meaning of “TSF” in this SFR. The intention of this requirement is to ensure that there is a registration process that includes a positive enablement step by an Administrator before components joining a distributed TOE can communicate with the other components of the TOE and before the new component can act as part of the TSF. The registration process may itself involve communication with the joining component: many network devices use a bespoke process for this, and the security requirements for the “registration communication” are then defined in FCO_CPC_EXT.1.2. Use of this “registration communication” channel is not deemed inconsistent with the requirement of FCO_CPC_EXT.1.1 (i.e. the registration channel can be used before the enablement step, but only in order to complete the registration process).