IAS ECC V2 in configuration #1 Public Security Target 2/128 About IDEMIA OT-Morpho is now IDEMIA, the global leader in trusted identities for an increasingly digital world, with the ambition to empower citizens and consumers alike to interact, pay, connect, travel and vote in ways that are now possible in a connected environment. Securing our identity has become mission critical in the world we live in today. By standing for Augmented Identity, we reinvent the way we think, produce, use and protect this asset, whether for individuals or for objects. We ensure privacy and trust as well as guarantee secure, authenticated and verifiable transactions for international clients from Financial, Telecom, Identity, Security and IoT sectors. With close to €3bn in revenues, IDEMIA is the result of the merger between OT (Oberthur Technologies) and Safran Identity & Security (Morpho). This new company counts 14,000 employees of more than 80 nationalities and serves clients in 180 countries. | For more information, visit www.idemia.com / Follow @IdemiaGroup on Twitter 3/128 © IDEMIA. All rights reserved. Specifications and information are subject to change without notice. The products described in this document are subject to continuous development and improvement. All trademarks and service marks referred to herein, whether registered or not in specific countries, are the properties of their respective owners. - Printed versions of this document are uncontrolled - 4/128 DOCUMENT MANAGEMENT Business Unit – Department SE Campus France Document type FQR Document Title IAS ECC V2 in configuration #1 – Public Security Target FQR No 110 8711 FQR Issue 3 Project Name IAS ECC V2 DOCUMENT REVISION Date Revision Modification Modified by [2017/12/11] 1.0 Creation IDEMIA [2018/03/23] 2.0 Add § 6.3 10 and AGD_PRE version IDEMIA [2018/04/24] 3.0 Life cycle precisions IDEMIA 5/128 TABLE OF CONTENT 1 DEFINITIONS.......................................................................................................11 2 REFERENCES........................................................................................................13 3 SECURITY TARGET INTRODUCTION.......................................................................16 3.1 Security Target Reference .................................................................................... 16 3.2 TOE Reference .................................................................................................... 16 3.3 TOE overview...................................................................................................... 17 3.3.1 TOE Type...................................................................................................... 17 3.3.2 Logical scope ................................................................................................ 17 3.3.3 Physical scope............................................................................................... 18 3.3.4 Required non-TOE hardware/software/firmware.............................................. 19 3.3.5 Usage and major security features .................................................................. 20 3.3.6 Scope of evaluation....................................................................................... 20 3.4 TOE Description .................................................................................................. 21 3.4.1 Data structure ............................................................................................... 21 3.4.1.1 File and File System................................................................................................... 21 3.4.1.2 Security Environment................................................................................................. 23 3.4.1.3 Security data Objects ................................................................................................. 24 3.4.2 Access Control Management .......................................................................... 25 3.4.3 Authentication of entities ............................................................................... 25 3.4.4 Electronic Services........................................................................................ 25 3.4.5 Administration of the TOE............................................................................. 26 3.4.6 Single Sign on feature (SSO).......................................................................... 26 3.5 Life Cycle ............................................................................................................ 26 3.5.1 Development................................................................................................ 28 3.5.1.1 Software development (phase 1) ................................................................................ 28 3.5.1.2 Hardware development (Phase 2) ............................................................................... 28 3.5.1.3 Javacard open platform manufacturing (phase 3)......................................................... 29 3.5.2 Production ................................................................................................... 29 3.5.2.1 Packaging and initialization (phase 4) .......................................................................... 29 3.5.2.2 Preparation (phase 5)................................................................................................. 29 3.5.3 Operational state.......................................................................................... 30 3.5.3.1 Applet pre-personalization (phase 6)........................................................................... 30 6/128 3.5.3.2 TOE personalization (phase 6)..................................................................................... 30 3.5.3.3 TOE Usage (phase 7) .................................................................................................. 31 3.5.4 Coverage of the different Life cycle state by the assurance components [AGD] & [ALC] ................................................................................................................... 31 3.5.5 State of the TOE depending on the phase ........................................................ 32 3.5.6 Mapping with the Users................................................................................. 33 4 CONFORMANCE CLAIM........................................................................................35 4.1 CC and package Conformance claim...................................................................... 35 4.2 PP Conformance Claim......................................................................................... 35 4.3 Conformance rationale ........................................................................................ 36 4.3.1 Life cycle conformance .................................................................................. 36 4.3.2 Additional assets........................................................................................... 36 4.3.3 Additional Roles............................................................................................ 37 4.3.4 Additional threats ......................................................................................... 37 4.3.5 Additional OSPs ............................................................................................ 37 4.3.6 Additional objectives..................................................................................... 38 4.3.6.1 Additional Security objectives for the TOE ................................................................... 38 4.3.6.2 Additional Security objectives for the Operational Environment.................................... 38 4.3.7 Additional SFRs............................................................................................. 38 4.3.8 Package conformance.................................................................................... 39 5 SECURITY PROBLEM DEFINITION ..........................................................................40 5.1 Assets and users.................................................................................................. 40 5.1.1 Assets.......................................................................................................... 40 5.1.1.1 Assets from protection profiles: User Data................................................................... 40 5.1.1.2 Additional Assets : TSF Data........................................................................................ 40 5.1.2 Subjects ....................................................................................................... 41 5.2 Threats............................................................................................................... 41 5.2.1 Threats drawn from the protection profiles...................................................... 41 5.2.1.1 T.SCD_Divulg Storing, copying and releasing of the signature creation data .................. 41 5.2.1.2 T.SCD_Derive Derive the signature creation data........................................................ 41 5.2.1.3 T.Hack_Phys Physical attacks through the TOE interfaces............................................ 42 5.2.1.4 T.SVD_Forgery Forgery of the signature verification data ............................................ 42 5.2.1.5 T.SigF_Misuse Misuse of the signature creation function of the TOE............................. 42 5.2.1.6 T.DTBS_Forgery Forgery of the DTBS/R ...................................................................... 42 5.2.1.7 T.Sig_Forgery Forgery of the electronic signature........................................................ 42 7/128 5.2.2 Additional threats ......................................................................................... 42 5.2.2.1 T.Key_Divulg Storing, copying, and releasing of a key stored in the TOE........................ 42 5.2.2.2 T.Key_Derive Derive a key......................................................................................... 42 5.2.2.3 T.TOE_PublicAuthKey_Forgery Forgery of the public key of a TOE authentication key ..... 43 5.2.2.4 T.Authentication_Replay Replay of an authentication of an external entity ................... 43 5.3 Organisational Security Policies............................................................................ 43 5.3.1 Security policies drawn from the protection profiles ......................................... 43 5.3.1.1 P.CSP_QCert Qualified certificate .............................................................................. 43 5.3.1.2 P.Qsign Qualified electronic signatures ...................................................................... 43 5.3.1.3 P. Sigy_SSCD TOE as secure signature creation device .................................................. 43 5.3.1.4 P.Sig_Non-Repud Non-repudiation of signatures.......................................................... 44 5.3.2 Additional security policies............................................................................. 44 5.3.2.1 P.LinkSCD_QualifiedCertificate Link between a SCD stored in the TOE and the relevant qualified certificate.................................................................................................................. 44 5.3.2.2 P.TOE_PublicAuthKey_Cert Certificate for asymmetric TOE authentication keys ............ 44 5.3.2.3 P.TOE_Construction Construction of the TOE by the Personalization Agent................... 44 5.3.2.4 P.eServices Provision of eServices............................................................................. 44 5.4 Assumptions....................................................................................................... 45 5.4.1 A.CGA Trustworthy certificate generation application...................................... 45 5.4.2 A.SCA Trustworthy signature creation application........................................... 45 5.4.3 A.CSP Secure SCD/SVD management by SCD ................................................... 45 6 SECURITY OBJECTIVES..........................................................................................46 6.1 Security Objectives for the TOE............................................................................. 46 6.1.1 Security Objectives drawn from the protection profiles..................................... 46 6.1.1.1 OT.Lifecycle_Security Lifecycle security........................................................................ 46 6.1.1.2 OT.SCD/SVD_Auth_Gen Authorized SCD/SVD generation.............................................. 46 6.1.1.3 OT.SCD_Unique Uniqueness of the signature creation data......................................... 46 6.1.1.4 OT.SCD_SVD_Corresp Correspondence between SVD and SCD...................................... 46 6.1.1.5 OT.SCD_Auth_Imp Authorized SCD import .................................................................. 46 6.1.1.6 OT.SCD_Secrecy Secrecy of the signature creation data .............................................. 46 6.1.1.7 OT.Sig_Secure Cryptographic security of the electronic signature................................. 47 6.1.1.8 OT.Sigy_SigF Signature creation function for the legitimate signatory only ................... 47 6.1.1.9 OT.DTBS_Integrity_TOE DTBS/R integrity inside the TOE .............................................. 47 6.1.1.10 OT.EMSEC_Design Provide physical emanations security............................................. 47 6.1.1.11 OT.Tamper_ID Tamper detection............................................................................... 47 6.1.1.12 OT.Tamper_Resistance Tamper resistance.................................................................. 47 6.1.1.13 OT.TOE_SSCD_Auth Authentication proof as SSCD........................................................ 47 8/128 6.1.1.14 OT.TOE_TC_SVD_Exp TOE trusted channel for SVD export............................................. 47 6.1.1.15 OT.TOE_TC_VAD_Imp Trusted channel of TOE for VAD import....................................... 48 6.1.1.16 OT.TOE_TC_DTBS_Imp Trusted channel of the TOE for DTBS import .............................. 48 6.1.2 Additional Security Objectives for the TOE ....................................................... 48 6.1.2.1 OT.Authentication_Secure Secure authentication mechanisms..................................... 48 6.1.2.2 OT.SCD/SVD_Management Management of SCD/SVD ................................................. 48 6.1.2.3 OT.Key_Lifecycle_Security Life cycle security of the keys stored in the TOE .................... 48 6.1.2.4 OT.Keys_Secrecy Secrecy of Keys................................................................................ 49 6.1.2.5 OT.TOE_AuthKey_Unique Uniqueness of the TOE authentication key(s) ......................... 49 6.1.2.6 OT.Lifecycle_Management Management of the life cycle.............................................. 49 6.1.2.7 OT.eServices Provision of eServices............................................................................ 49 6.2 Security Objectives for the Operational Environment ............................................. 50 6.2.1 Security Objectives drawn from the protection profiles..................................... 50 6.2.1.1 OE.SVD_Auth Authenticity of the SVD.......................................................................... 50 6.2.1.2 OE.CGA_QCert Generation of qualified certificates....................................................... 50 6.2.1.3 OE.Dev_Prov_Service Authentic SSCD provided by SSCD Provisionning Service................ 50 6.2.1.4 OE.HID_TC_VAD_Exp Trusted channel of HID for VAD export ........................................ 50 6.2.1.5 OE.DTBS_Intend SCA sends data intended to be signed................................................ 50 6.2.1.6 OE.SCA_TC_DTBS_Exp Trusted channel of SCA for DTBS export ..................................... 51 6.2.1.7 OE.Signatory Security obligation of the signatory........................................................ 51 6.2.1.8 OE.SCD/SVD_Auth_Gen Authorized SCD/SVD generation.............................................. 51 6.2.1.9 OE.SCD_Secrecy SCD Secrecy ..................................................................................... 51 6.2.1.10 OE.SCD_Unique Uniqueness of the signature creation data.......................................... 51 6.2.1.11 OE.SCD_SVD_Corresp Correspondance between SVD and SCD....................................... 51 6.2.1.12 OE.CGA_SSCD_Auth Pre-initialisation of the TOE for SSCD authentication ...................... 51 6.2.1.13 OE.CGA_TC_SVD_Imp CGA trusted channel for SVD import ........................................... 52 6.2.2 Additional security objectives for the operational environment.......................... 52 6.2.2.1 OE.LinkSCD_QualifiedCertificate Link betwaan SCD stored in the TOE and the relevant qualified certificate.................................................................................................................. 52 6.2.2.2 OE.AuthKey_Transfer Secure transfer of authentication key(s) to the TOE ..................... 52 6.2.2.3 OE.AuthKey_Unique Uniqueness of the authentication key(s)...................................... 52 6.2.2.4 OE.TOE_PublicKeyAuth_Transfer Secure transfer of public authentication key(s) of the TOE52 6.2.2.5 OE_TOE_Construction Construction of the TOE by the Personalisation_Agent................ 52 6.3 Security Objectives Rationale ............................................................................... 53 6.3.1 Security objectives backtracking ..................................................................... 53 6.3.2 Security objectives sufficiency ........................................................................ 55 7 EXTENDED COMPONENTS DEFINITION..................................................................61 9/128 7.1 FPT_EMS TOE Emanation ..................................................................................... 61 7.2 FCS_RNG Random Number Generation ................................................................. 62 7.3 FIA_API Authentication proof of Identity............................................................... 63 8 SECURITY REQUIREMENTS ...................................................................................65 8.1 Security Functional Requirements......................................................................... 65 8.1.1 Security attributes......................................................................................... 65 8.1.1.1 SCD/SVD Management............................................................................................... 65 8.1.1.2 SCD Operational ........................................................................................................ 66 8.1.1.3 IAS ECC Management................................................................................................. 66 8.1.1.4 Key Management ...................................................................................................... 66 8.1.2 SFRs drawn for PP ......................................................................................... 67 8.1.2.1 Phase 6&7................................................................................................................. 67 8.1.2.2 Phase 7 ..................................................................................................................... 80 8.1.3 Additional SFRs............................................................................................. 84 8.1.3.1 Phase 6 ..................................................................................................................... 84 8.1.3.2 Phase 7 ..................................................................................................................... 86 8.1.3.3 Phase 6 & 7 ............................................................................................................... 94 8.2 Security Assurance Requirements....................................................................... 103 8.2.1 AVA_VAN.5 augmentation ........................................................................... 104 8.2.2 ALC_DVS.2 augmentation ............................................................................ 104 9 TOE SUMMARY SPECIFICATIONS ........................................................................118 9.1 SF.RAD_MGT..................................................................................................... 118 9.2 SF.SIG............................................................................................................... 118 9.3 SF.DEV_AUTH ................................................................................................... 119 9.4 SF.ADM_AUTH.................................................................................................. 119 9.5 SF.SM............................................................................................................... 120 9.6 SF.KEY_MGT ..................................................................................................... 120 9.7 SF.CONF ........................................................................................................... 121 9.8 SF.ESERVICE...................................................................................................... 121 9.9 SF.SAFESTATE_MGT........................................................................................... 121 9.10 SF.PHYS............................................................................................................ 122 10 ANNEX A – COMPOSITION WITH THE UNDERLYING JAVACARD PLATFORM ...........123 10.1 Evaluation assurance Level................................................................................. 123 10.2 Coverage of the Assumptions of the Javacard Open Platform (A.PLT vs TOE) .......... 123 10/128 10.3 Coverage of the OSP of the Javacard Open Platform (OSP.PLT vs TOE) ................... 123 10.4 Coverage of the security objective of the Javacard Open Platform Environment (OE.PLT vs TOE)................................................................................................................. 123 10.5 Support of the TOE TSFs by the Javacard Open Platform TSFs (TSF.TOE vs TSF.SFR). 123 10.6 Support of the TOE SFRs by the Javacard Open Platform SFRs (SFR.TOE vs SFR.PLT) 124 10.7 Coverage of the composite ST threats by the platform threats .............................. 127 11/128 DEFINITIONS ADF Application Dedicated File AES Advanced Encryption Standard AID Application Identifier AMB Access Mode Byte APDU Application Protocol Data Unit (command received/Data sent by the chip) API Application Programming Interfaces CA Certification authority CBC Cipher Block Chaining CGA Certificate Generation Authority (Authority in charge of generating the qualified certificate(s)) C/S Client / Server CSE Current Security Environment DAP Data Authentication Pattern (enable to ensure integrity & authenticity of javacard package when loaded) CSP Certificate Service Provider DAPP Device Authentication with Privacy Protection DES Data Encryption Standard DF Dedicated File DH Diffie Hellman DTBS Data to be signed (Sent by the SCA) DTBS Representation Representation of the Data to be signed EAL Evaluation Assurance Level EF Elementary File EEPROM Electrically Erasable Programmable Read Only Memory FID File identifier GP Global Platform HI Human Interface (used to enter the RAD and VAD by the user) IC Integrated Chip ICC Integrated Chip card IFD Interface Device MAC Message Authentication code PIN Personal Identification Number PKI Public Key Infrastructure RAD Reference Authentication Data (PIN stored) RCA Root Certification Authority 12/128 ROM Read Only Memory RSA Rivest Shamir Adleman RSA CRT Rivest Shamir Adleman – Chinese Remainder Theorem SCA Signature creation Application (Application requiring a qualified signature to the chip) SCB Security Condition Byte SCD Signature Creation Data (Signature key) SCP Secure Channel Procotol SDO Security Data Object SE Security Environment SHA Secure hashing Algorithm SSCD Secure Signature Creation Device SSE Static Security Environment SSESP Static Security Environment for Security Policies SSO Single Sign On SVD Signature Verification Data (Signature Verification key) TOE Target of evaluation URL Uniform Resource Locator USB Universal Serial Bus VAD Verification Authentication Data (PIN submitted by the holder) XML eXtensible Markup Language 13/128 REFERENCES [Directive] Directive 1999/93/EC of the european parliament and of the council of 13 December 1999 on a community framework for electronic signatures [AN10] JIL - Certification of "open" smart card products - Version 1.1 - 4 February 2013 [ANSIX9.31] "Digital Signatures using Reversible Public Key Cryptography for the Financial Services Industry (DSA)" - ANSI X9.31-1998, American Bankers Association [ANSIX9.62] ANSI x9.62-2005 Public Key Cryptography for the Financial Services Industry – The Elliptic Curve Digital Signature Algorithm (ECDSA) [CC31-1] “Common Criteria for information Technology Security Evaluation, Part 1: Introduction and general model", September 2012, Version 3.1 revision 4 [CC31-2] “Common Criteria for information Technology Security Evaluation, Part 2: Security Functional requirements", September 2012, Version 3.1 revision 4 [CC31-3] “Common Criteria for information Technology Security Evaluation, Part 3: Security Assurance requirements", September 2012, Version 3.1 revision 4 [FIPS180-3] "FIPS PUB 180-3, Secure Hash Standard" October 2008 , National Institute of Standards and Technology [GP2.2.1] Global Platform, Card Specification - Version 2.2.1 – January 2011. [IASECC] European Card for e-Services and national e-ID Applications - IAS ECC v1.0.1 [IEEE] IEEE Std 1363a-2004 Standard Specification of Public-Key Cryptography [JIL-COMP] Joint Interpretation Library - Composite product evaluation for Smart Cards and similar devices – v1.2 [Minidriver] Windows Smart Card Minidriver Specification - Version 7.06 - July 1, 2009 14/128 [PKCS#1] PKCS #1 v2.1: RSA Cryptography Standard - June 14, 2002 [PKCS#3] PKCS#3 - Diffie-Hellman Key-Agreement Standard - Version 1.4, November 1, 1993* [PLT] Javacard Open platform certified under reference [ANSSI-CC-2017/49] [PP0084] Security IC Platform Protection Profile with augmentation packages - Version 1.0 - BSI-CC-PP-0084-2014 [TR03111] Technical Guideline TR-03111 - Elliptic Curve Cryptography - Version 2.0 [RGS_B1] Référentiel général de sécurité, version 2.0 du 13/06/14 - Annexe B1 - Mécanismes cryptographiques [SCP03] Global Platform Card Technology, Secure Channel Protocol 03, Card Specification v 2.2 - Amendment D - Version 1.1 - September 2009. [SSCD2] Protection profiles for secure signature creation device — Part 2: Device with key generation Version 2.0.1 – 23/01/2012 – Reference BSI-CC-PP-0059-2009-MA-01 [SSCD3] Protection profiles for secure signature creation device — Part 3: Device with key import Version 1.0.2 – 24/07/2012 – Reference BSI-CC-PP-0075 [SSCD4] Protection profiles for secure signature creation device — Part 4: Extension for device with key generation and trusted communication with certificate generation application Version 1.0.1 – 14/11/12 – Reference BSI-CC-PP-0071 [SSCD5] Protection profiles for secure signature creation device — Part 5: Extension for device with key generation and trusted communication with signature creation application Version 1.0.1 – 14/11/12 – Reference BSI-CC-PP-0072 [SSCD6] Protection profiles for secure signature creation device — Part 5: Extension for device with key import and trusted communication with signature creation application Version 1.0.4 – 03/04/13 – Reference BSI-CC-PP-0076 15/128 [SP800-38B] NIST Special Publication 800-38B, Recommendation for Block, Cipher Modes of Operation: The CMAC Mode for Authentication, Morris Dworkin, May 2005 [14890] CEN/EN14890:2013 Application Interface for smart cards used as Secure Signature Creation [7816-4] ISO/IEC 7816-4:2013, Identification Cards — Integrated circuit cards— Part 4 : Organization, security and commands for interchange [9797-1] ISO/IEC 9797-1:2011, Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: Mechanisms using a block cipher [11568-2] ISO 11568-2:2012,Financial services - Key management (retail) - Part 2 : symmetric ciphers, their key management and life cycle [ST Config#1] FQR 110 8326 Ed6 – Clytemnestre in Config #1 – IAS ECC V2 Security Target [AGD_PRE] FQR 110 8223 Ed3 – Clytemnestre – AGD_PRE [AGD_OPE] FQR 110 8380 Ed3 - Clytemnestre - AGD_OPE [AGD_PRE_PLT] FQR 110 7743 Ed4 - ID-One Cosmo V8.1 - Pre-Perso Guide 16/128 SECURITY TARGET INTRODUCTION 3.1 Security Target Reference Title IAS ECC V2 in configuration # 1 – Public Security Target Reference and version FQR 110 8711 Ed3 Author IDEMIA CC version 3.1 revision 4 EAL EAL5 augmented with AVA_VAN.5 and ALC_DVS.2 3.2 TOE Reference TOE name IAS ECC v2 in configuration # 1 TOE version number R1 Developer name IDEMIA Guidance document for preparation FQR 110 8223 Ed3 – Clytemnestre – AGD_PRE Guidance document for operational use FQR 110 8380 Ed3 - Clytemnestre - AGD_OPE Guidance document for preparation of Platform FQR 110 7743 Ed4 - ID-One Cosmo V8.1 - Pre-Perso Guide Guidance document for operational use of Platform FQR 110 7744 Ed4 - ID-One Cosmo V8.1 - Reference Guide FQR 110 8001 Ed1 - ID-One Cosmo V8.1 - Application Loading Protection Guidance FQR 110 7999 Ed3 - ID-One Cosmo V8.1 - Security Recommendations Name of [PLT] Plateforme JavaCard de la carte à puce ID-One Cosmo V8.1 sur composant P6022y VB (NXP P60D145) = ERATO large version Certificate ANSSI-CC-2017/49-M01 17/128 The TOE identification (AID and version) is described in [AGD_PRE]. 3.3 TOE overview 3.3.1 TOE Type The Target of Evaluation is a smartcard which is configured as a secure signature creation Device (SSCD), used to create advanced or qualified signature in the sense of EC/1999/93. The TOE is a composite product made up of an embedded software developed using javacard technology, composed on a javacard open platform. Both are developed by IDEMIA. The javacard open platform has already been certified. For more details see [PLT]. The embedded software is made up of four javacard components:  a javacard Applet ([Applet]);  a javacard API ([API]);  two javacard Interfaces ([Interface]); [Applet] relies on  [API] which provides a wide range of services enabling to manage the files and cryptographic objects;  [Interface] which provides the mechanisms for data sharing with other applets;  Javacard API provided by the underlying javacard open platform; 3.3.2 Logical scope The TOE is made up of:  The underlying javacard open platform  The javacard code ([Applet], [API] and [Interface]) Moreover, as the [PLT] is certified as a javacard open platform and complies with the requirements of the Application note 10 [AN10], and as the TOE complies also with [AN10], the TOE may also contain any other applets that complies with [AN10] and the specific requirements of the TOE stated in the guidance documents. The logical scope of the TOE may be depicted as follows: 18/128 Figure 1 - Limits of the TOE 3.3.3 Physical scope The TOE is physically made up of several components:  the javacard open platform [PLT], which contains in its ROM code the javacard packages [Applet], [API] and [Interface];  A potential patch [patch] loaded in EEPROM. If a functional patch is required, its reference will be included in a maintenance report;  the other applets that may potentially be loaded on the javacard open platform [PLT] at any time; 19/128 Figure 2 - Physical scope of the TOE The patch, if present, is self-protected (encrypted and signed). The other applets must fulfill the requirements stated in [AN10] and in the guidance documentation of the TOE. Once constructed, the TOE is a bare microchip with its external interfaces for communication. The physical medium on which the microchip is mounted is not part of the target of evaluation because it does not alter nor modify any security functions of the TOE. The TOE may be used on several physical medium  within an inlay, or eCover;  in a plastic card;  within a USB key;  ….; 3.3.4 Required non-TOE hardware/software/firmware The TOE is a Secure Signature Creation Device. It is an independent product and does not need any additional hardware/software/firmware to ensure its security. In order to be powered up and to be able to communicate, the TOE needs a card reader. 20/128 3.3.5 Usage and major security features The TOE intended usage is to be used as a “secure signature creation device” with key generation and/or key import, with respect to the European directive EC/1999/93. Within the framework described by [SSCD2], [SSCD3], [SSCD4], [SSCD5], and [SSCD6], the TOE allows to  perform basic, advanced and qualified signature;  authenticate the cardholder based on a PIN and/or Biometric data verification;  authenticate one (or several) administrator(s) of the TOE, that may have special rights to administrate the SCD and SVD (generation, import), using either symmetric and/or asymmetric mechanisms, or PIN and/or Biometric data verification;  establish trusted channel, protected in integrity and confidentiality, with Trusted IT entities such as a SCA or a CSP. It may be realized by means of symmetric and/or asymmetric mechanisms; The scope of [SSCD2], [SSCD3], [SSCD4], [SSCD5], and [SSCD6], is extended in several ways:  A super Administrator (TOE_Administrator) has special rights to administrate the signature creation function, the mode of communication, and the type of cryptographic mechanisms to use.  SCD/SVD pairs and other cryptographic objects may be generated and/or imported after issuance at any time, and in particular, they may be updated during the TOE life cycle.  The TOE may be used to realize digital signature in contact and/or contactless mode.  eServices features are added, enabling the cardholder to perform C/S authentication, Encryption key decipherment….  A complete access control over objects is ensured, whatever their type is : File or cryptographic objects (PIN, keys,…), ensuring it is not possible to bypass the access rules. The TOE may be used for various use cases requiring qualified signature:  Electronic signature application;  Electronic health card;  Electronic services cards;  ……; Depending on the use case and or the ability of the underlying javacard open platform, the TOE may be used  in contact mode (T=0 and/or T=1 protocol);  in contactless protocol (T=CL); 3.3.6 Scope of evaluation The scope of evaluation covers the following features: 21/128  Features covered by [SSCD2] ], [SSCD3], [SSCD4], [SSCD5], and [SSCD6]  Authentication mechanisms based on cryptographic scheme  Unblocking of RAD  Management of the other keys (authentication and e-services) 3.4 TOE Description The TOE is compliant with the specification [IASECC], and is enhanced with the following features:  The TOE supports user authentication based on Biometric comparison. Two modes of operations, are possible: either a 1:1 Biometric comparison, or a 1:n comparison can be made. These modes of operations are compliant to [14890] and [7816-4]  The TOE supports Elliptic curves cryptography for electronic signature, encryption key decipherment, and C/S authentication. These modes of operations are compliant to [14890].  The TOE supports several modes of operation for the data hashing. The data may also be fully hashed on card or off card. These modes of operations are compliant to [14890].  The TOE supports secure messaging and authentication scheme based on AES block Cipher. These modes of operations are compliant to [14890].  The TOE supports several features required by [Minidriver] 3.4.1 Data structure The TOE manages two types of structures:  The Files, compliant with [7816-4]  The Security Data Objects, which are secure containers storing cryptographic data (PINs, Keys,…) 3.4.1.1 File and File System The TOE handles the following types of file (described in [7816-4]):  Transparent File - EF  Application Dedicated File - ADF  Dedicated File - DF All these files are organized within a File System compliant to [7816-4]. It represents the hierarchy between all the files. At the top of the structure stands the Root file (or Master File), it is the default selected file at reset. Under the Root file, are located the Application Dedicated File. 22/128 Figure 3 - Exemple of File System structure The Root, as well as each ADF and DF, may contain up Elementary File (EF) or Security Data Object (SDO). Each of them may contain up to 255 files (EF or DF) and 31 SDO of each type. 23/128 The TOE allows to  create, delete, activate, deactivate, and terminate any type of file (except the Application dedicated file), which update the File System.  read, update, resize any transparent file (EF)  move within the File Structure by use of file selection Each file is characterized by its own attributes, such as:  Access conditions  File identifier  Location within the File System  Size (for EF) The management of the file system is fully described in [IASECC]. 3.4.1.2 Security Environment The TOE handles Security Environments. Three types of Security Environment may be sorted out:  Static Security Environment - SSE  Static Security Environment for Security Policies – SSESP  Current Security Environment - CSE Basically a security environment contains several couple of cryptographic data, each of them containing:  One or several key identifier : KEY_ID  an algorithm identifier : ALGO_ID  a mode of usage : USE These cryptographic data may be used to:  load a pre-defined cryptographic context to perform a cryptographic operation (for signature, for C/S authentication,…). It is the case of a SSE.  define an access condition to fulfill before granting an access right: the key defined by the identifier KEY_ID shall be used with the algorithm ALGO_ID and with the mode USE to grant an access right. It is the case of a SSESP.  Store the current cryptographic context required to realize a given service. It is the case of the CSE. The SSESP and SSE are bound to an ADF and are stored in security Data Objects located within an Application dedicated file (ADF). The CSE is unique for the TOE at any moment 24/128 3.4.1.3 Security data Objects The TOE handles as well cryptographic data objects, called Security Data Objects (SDO), dedicated to store the keys, the PIN, the Biometric template, the Diffie Hellmann parameters and the Security Environments, as well as their attributes. The following types of SDO are available:  SDO PIN contains a Personal identification Number  SDO BIO contains one or several Biometric template  SDO RSA Public Key contains a RSA Public Key  SDO RSA Private Key contains a RSA Private Key  SDO ECC Public Key contains an ECC Public Key  SDO ECC Private Key contains an ECC Private Key  SDO Security Environment contains a Security Environment  SDO Symmetric DES Key Set contains a Symmetric DES Key Set  SDO Symmetric AES Key Set contains a Symmetric AES Key Set  SDO Diffie Hellmann parameters contains a set of Diffie Helmann Domain parameters The SDO may be located in any dedicated file (DF) or Application Dedicated file (ADF). The TOE enables to create, update and use any of these SDO. The way the SDO may be used depends on its type:  SDO PIN and SDO BIO may be changed, reset, verified  SDO RSA Public Key may be used to verify a certificate  SDO RSA Private Key and SDO ECC Private key may be used to sign, perform a C/S authentication or decrypt a cryptogram  SDO Security Environment may be changed, reset, verified  SDO Symmetric DES Key Set and SDO Symmetric AES Key Set may be used to verify an external authentication or to perform a mutual authentication and establish a trusted channel  SDO Diffie Hellmann parameters may be used to establish a secure channel (without authentication) Each SDO is characterized by its own attributes, such as:  Access conditions  Location within the File System  Size  Type  Secret value  Usage counter and tries counter  Algorithm to be used The management of SDO is fully described in [IASECC]. 25/128 3.4.2 Access Control Management One of the Core features of the TOE is to provide access control management on any operations on any objects it handles (Files of SDO). The Access conditions encoding is the compact encoding described in [7816-4], enhanced as described in [IASECC]. It relies on access rules encoded by means on Access Mode Bytes (AMB) and Security Conditions Bytes (SCB) as described in [7816-4] and [IASECC]. Prior to granting access to a given operation, the TOE checks the requested access rights are fulfilled. Basically, an Access condition is granted if the security conditions are fulfilled. An access condition is a combination of security conditions based on identified keys/PIN/BIO/secrets:  User Authentication (by PIN or Biometric comparison). It is used to authenticate the cardholder or an external entity administrator  Authentication of an external entity administrator  Mutual authentication with a trusted IT entity  Communication protected in integrity and confidentiality 3.4.3 Authentication of entities The TOE allows the authentication of several entities in order to grant them some rights.  User Authentication (by PIN or Biometric comparison). It is used to authenticate the cardholder or an external entity administrator  Authentication of an external entity administrator (based on symmetric or asymmetric scheme)  Mutual authentication with an external entity and establishment of a trusted channel protected in integrity and confidentiality (based on symmetric or asymmetric scheme)  Personalization Agent authentication (for the phase 6)  TOE Administrator authentication (in phase 7) These authentication mechanisms are the cornerstone for the access control mechanisms used to grant access to resources (Files or SDO). 3.4.4 Electronic Services The TOE supports as well several electronic services:  C/S authentication: this feature enables to authenticate the TOE to an external entity.  Digital signature: this feature enables the cardholder to electronically signs documents. The signature may be either advanced or qualified (compliant with [SSCD2] and [SSCD3]).  Encryption key decipherment: this feature enables the cardholder to store secret data on an electronic vault. The key needed to decipher the key encrypting these data is securely stored in the TOE. The cardholder’s computer sends the encrypted encryption key to the TOE to get the plain encryption key. 26/128 3.4.5 Administration of the TOE The TOE offers administration services. Upon successful authentication, the TOE Administrator may modify the following attributes:  Communication medium: the administrator may restrict the ability to communicate with the TOE in contact and/or contactless mode.  Hashing method to be used for digital signature: the administrator may restrict the ability to perform electronic signature (advanced or qualified) on DTBS-representation partly computed by the TOE. In such case, the digital signature will only be done with last round of data hashing done on the TOE.  Authentication mechanism to be used: the administrator may restrict the cryptographic means to be used by the TOE to authenticate external entities (Administrator or IT entity): either symmetric and/or asymmetric cryptography.  Identification of the TOE : the administrator is entitled to identify the TOE  Biometric threshold : the administrator can modify the biometric threshold 3.4.6 Single Sign on feature (SSO) The TOE may also behave as a Single Sign on (SSO). It provides access points to any other applet willing to use authentication services based on a PIN stored in the Root File (or Master File). In particular it is possible to:  Check a PIN  Change a PIN  Reset a PIN  Retrieve the remaining tries counter  Retrieve the validation status This feature is used for instance when the PIN(s) is shared with a legacy application. Even though the TOE offers these entry points, it does still enforce access control in the same way it does when it receives incoming APDU to use a PIN. 3.5 Life Cycle With respect to the Life cycle envisioned in [PP0084], seven different phases may be sorted out. The life cycle of the composite TOE may be depicted as follows: 27/128 Figure 4 - TOE life cycle The point of delivery of the TOE is the end of phase 3. At this moment, the TOE is self protected, but not constructed. Patch Phase 1 28/128 The TOE Life cycle may be splitted in three steps  Development (phase 1 to 3);  Production (phase 4 and 5);  Operational state (phase 6 and 7); 3.5.1 Development The development of the TOE takes place in phase 1 to 3. In this step, the parts of TOE are designed, tested and manufactured. This step is covered by [ALC] tasks. TOE development sites:  IC development : covered by IC certification  Platform and Patch Code: Colombes, Pessac  Application Code: Colombes 3.5.1.1 Software development (phase 1) This development environment of the Javacard Applet, the patch if any and javacard open platform (JOP) is enforced by IDEMIA. The confidentiality and integrity of the cap files, the patch and of the javacard open platform is covered by the evaluation of the development premises of IDEMIA. To ensure security, access to development tools and products elements (PC, card reader, documentation, source code...) is protected. The protection is based on measures for prevention and detection of unauthorized access. Two levels of protection are applied:  Access control to IDEMIA offices and sensitive areas.  Access to development data through the use of a secure computer system to design, implement and test software At the end of this phase, the code of the javacard applet is delivered to the javacard open platform development team, in order to be stored in the ROM code. The software development phase of the javacard open platform is covered by [PLT]. 3.5.1.2 Hardware development (Phase 2) In this phase, the underlying integrated circuit is developped. This phase takes place at the manufacturing site of the silicium provider. The confidentiality and integrity of the javacard packages and javacard open platform is covered by the evaluation of the development premises of the silicium manufacturer (see [PLT]) 29/128 3.5.1.3 Javacard open platform manufacturing (phase 3) In this phase, the code of the javacard open platform (JOP) and the applet are masked on the IC. This phase takes place at the manufacturing site of the silicium provider. The confidentiality and integrity of the javacard packages and javacard open platform is covered by the evaluation of the development premises of the silicium manufacturer (see [PLT]). Depending on the choice made for the optional code loading, it may be loaded during this phase. At the end of phase 3, the javacard open platform (JOP) and the TOE are self protected: all its security functions are activated. The point of delivery of the TOE is the end of phase 3. 3.5.2 Production The production environment encompasses the preparation of the TOE. During this step, the following operations are made:  The chip is mounted on a physical layout (card, USB token...)  The javacard open platform is prepersonalized  The javacard open platform is personalized  The personalization key is loaded on the TOE  The applet is instantiated 3.5.2.1 Packaging and initialization (phase 4) This phase is performed by the Manufacturing Agent, which controls the TOE that is in charge of the packaging and initialization of the Javacard open platform (JOP). This phase spans the phase 4 of the Javacard open platform (JOP) life cycle and is covered by [AGD_PRE] tasks of [PLT]. All along this phase, the TOE is self-protected as it requires the authentication of the Manufacturing Agent prior to any operation. 3.5.2.2 Preparation (phase 5) All along this phase, the TOE is self-protected as it requires the authentication of the manufacturing Agent prior to any operation. This phase spans the following phases of the javacard open platform (JOP):  Phase 5 30/128  Phase 6  Phase 7 The following process is applied during this phase  a non-security patch [patch] (patch code that has no impacts on product auto-protection) is loaded in the javacard open platform (JOP) (if needed). Before the patch is loaded in the javacard open platform, the TOE is made of two elements (the patch and the javacard open platform). This case is covered by [AGD_PRE] task of [PLT];  the javacard open platform (JOP) is switched in phase 5 and the applet may be instantiated in this phase. This case is covered by [AGD_PRE] tasks of the TOE and [AGD_PRE] tasks of [PLT];  the javacard open platform (JOP) is switched in phase 6 and the applet may be instantiated in this phase. This case is covered by [AGD_PRE] tasks of the TOE and [AGD_OPE] tasks of [PLT]  the javacard open platform (JOP) is switched in phase 7 and the applet may be instantiated in this phase. This case is covered by [AGD_PRE] tasks of the TOE and [AGD_OPE] tasks of [PLT] Moreover, during this phase, any other applet may be loaded at any time (phase 5, 6 or 7 of the javacard open platform life cycle), provided they fulfill the requirements laid down in [AN10] read in [AGD_OPE] of [PLT]. This case is covered by [AGD_PRE] and [AGD_OPE] tasks of [PLT]. At the end of this phase, the javacard open platform is switched in phase 7 (DAP enforced). 3.5.3 Operational state 3.5.3.1 Applet pre-personalization (phase 6) This phase is performed by the Personalization Agent, which controls the TOE. During this phase, the javacard applet is prepared as required by P.TOE_Construction. All along this phase, the TOE is self-protected as it requires the authentication of the Personalization Agent prior to any operation. This step is covered by [AGD_PRE] tasks of the TOE and [AGD_OPE] tasks of [PLT]. Moreover, during this phase, any other applet may be loaded provided they fulfil the requirements laid down in [AN10] read in [AGD_OPE] of [PLT]. This case is covered by [AGD_OPE] tasks of [PLT]. 3.5.3.2 TOE personalization (phase 6) This phase is performed by the Personalization Agent, which controls the TOE, which is in charge of the javacard applet personalization. 31/128 All along this phase, the TOE is self-protected as it requires the authentication of the Personalization Agent prior to any operation. This phase may not necessarily take place in a manufacturing site, but may be performed anywhere. The Personalization Agent is responsible of ensuring a sufficient level of security during this phase. The javacard applet is personalized according to [AGD_PRE], and the following operations are made: creation of applicative data (SCD, SVD, RAD, File,...) and the TOE_Administrator Agent key is loaded. At the end of phase 6, the TOE is constructed. This step is covered by [AGD_PRE] tasks of the TOE and [AGD_OPE] tasks of [PLT]. Moreover, during this phase, any other applet may be loaded provided they fulfil the requirements laid down in [AN10] read in [AGD_OPE] of [PLT]. This case is covered by [AGD_OPE] tasks of [PLT]. 3.5.3.3 TOE Usage (phase 7) The TOE is under the control of the User (Signatory and/or Administrator) and TOE_Administrator. During this phase, the TOE may be used to create a secure signature and manage the SCD, the SVD and the RAD. This step is covered by [AGD_OPE] tasks of the TOE and [AGD_OPE] tasks of [PLT]. Moreover, during this phase, any other applet may be loaded provided they fulfill the requirements laid down in [AN10] read in [AGD_OPE] of [PLT]. This case is covered by [AGD_OPE] tasks of [PLT]. 3.5.4 Coverage of the different Life cycle state by the assurance components [AGD] & [ALC] The following phases of the life cycle are covered as follows: Steps Life cycle State TOE : covered by Development Phase 1 ALC [PLT] ALC [Applet] 32/128 Patch is self protected Phase 2 ALC [PLT] ALC [Applet] Phase 3 ALC [PLT] ALC [Applet] Patch is loaded TOE is self protected Point of delivery of the TOE Production Phase 4 AGD_PRE [PLT] Phase 5 AGD_PRE [PLT] AGD_OPE [PLT] AGD_PRE [Applet] Patch is loaded Operational Phase 6 AGD_OPE [PLT] AGD_PRE [Applet] TOE is constructed Phase 6 AGD_OPE [PLT] AGD_PRE [Applet] Phase 7 AGD_OPE [PLT] AGD_OPE [Applet] The point of delivery of the TOE is the end of phase 3. The security of the patch loading (done after phase 3) is fully enforced by technical security measures that have been evaluated in [PLT]. Therefore, phase 4 to 6 are fully covered by [AGD_PRE] and [AGD_OPE]. 3.5.5 State of the TOE depending on the phase 33/128 Life cycle State TOE Self protected constructed Phase 1 No No Phase 2 No No Phase 3 No No Phase 4 Yes No Phase 5 Yes No Phase 6 Yes Yes Phase 7 Yes Yes 3.5.6 Mapping with the Users For each of these phases, the following subjects may interact with the TOE Life cycle phase Subject interacting with the TOE Phase 1 IDEMIA Patch ,if it exists, is self protected Phase 2 IDEMIA Phase 3 IDEMIA TOE is self protected Phase 4 Manufacturing Agent Offcard Phase 5 Manufacturing Agent Offcard Phase 6 Personalization Agent Offcard TOE is constructed Phase 6 Personalization Agent 34/128 Offcard Phase 7 Users 35/128 CONFORMANCE CLAIM 4.1 CC and package Conformance claim This security target claims conformance to the Common Criteria version 3.1, revision 4 ([CC31-1], [CC31-2] and [CC31-3]). The conformance to the Common Criteria is claimed as follows: CC Conformance rationale Part 1 Strict Conformance Part 2 Conformance to the extended part.  FCS.RNG.1: “Random number generation”  FPT_EMS.1: “TOE Emanation”  FIA_API.1: “Authentication proof of Identity” Part 3 Conformance to assurance package EAL 5, augmented with  AVA_VAN.5: “Advanced methodical vulnerability analysis”  ALC_DVS.2: “Sufficiency of security measures” Moreover the security target claims compliance with Application note 10 [AN10]. 4.2 PP Conformance Claim This security target claims a strict conformance to the Secure Signature Creation Device (SSCD) Protection Profile [SSCD2], [SSCD3] conform to CC version 3.1 revision 3 and [SSCD4], [SSCD5], and [SSCD6] conform to CC version 3.1 revision 4. This security target also addresses the manufacturing and personalization phases at TOE level (cf. TOE life cycle presented in §3.5. The additions do not contradict any of the threats, assumptions, organizational policies, objectives or SFRs stated in the protection profiles that cover the operational phase of the signature device. Additional information are stated in the following chapter. 36/128 4.3 Conformance rationale 4.3.1 Life cycle conformance The life cycle of the TOE is described in §3.5. This chapter demonstrates the mapping of the TOE’s life cycle with the one described in the protection profiles. Life cycle phase of the TOE Life cycle phase with respect to the protection profiles Phase 1 Development phase: SSCD Development Patch is self protected Phase 2 Development phase: SSCD Production Phase 3 Development phase: SSCD Production TOE is self protected Phase 4 N/A Phase 5 N/A Patch is loaded on the Javacard open platform TOE is self protected Phase 6 Usage phase: SSCD Preparation TOE is constructed Phase 6 Usage phase: SSCD Preparation Phase 7 Usage phase: SSCD Operational use 4.3.2 Additional assets All assets from the protection profiles are included in this security target. The following assets have been added: Keys: 1. Private or secret keys used to authenticate an external user or entity, or to perform eServices. Their integrity and confidentiality must be maintained. 37/128 2. public key used to perform eServices. Their integrity must be maintained. 4.3.3 Additional Roles The roles from protection profiles are maintained in this security target; however the following refinements for the role R.Admin have been added:  Personalisation Agent  User_Admin  TOE_Administrator  SCA  HID  IFD 4.3.4 Additional threats All the threats from the protection profiles are maintained in this security target. The following policies have been added:  T.Key_Divulg Storing, copying, and releasing of a key stored in the TOE  T.Key_Derive Derive a key  T.TOE_PublicAuthKey_Forgery Forgery of the public key of a TOE authentication key  T.Authentication_Replay Replay of an authentication of an external entity 4.3.5 Additional OSPs All the Policies from the protection profiles are maintained in this security target. The following policies have been added:  P.LinkSCD_QualifiedCertificate Link between a SCD stored in the TOE and the relevant qualified certificate  P.TOE_PublicAuthKey_Cert Certificate for asymmetric TOE authentication keys  P.TOE_Construction Construction of the TOE by the Personalization Agent  P.eServices Provision of eServices 38/128 4.3.6 Additional objectives 4.3.6.1 Additional Security objectives for the TOE All the security objectives for the TOE from the protection profiles are maintained in this security target. The following objectives have been added:  OT.Authentication_Secure Secure authentication mechanisms  OT.SCD/SVD_Management Management of SCD/SVD  OT.Key_Lifecycle_Security Life cycle security of the keys stored in the TOE  OT.Keys_Secrecy Secrecy of Keys  OT.TOE_AuthKey_Unique Uniqueness of the TOE authentication key(s)  OT.Lifecycle_Management Management of the life cycle  OT.eServices Provision of eService 4.3.6.2 Additional Security objectives for the Operational Environment All the security objectives for the operational environment from the protection profiles are maintained in this security target. The following objectives have been added:  OE.LinkSCD_QualifiedCertificate Link betwaan SCD stored in the TOE and the relevant qualified certificate  OE.AuthKey_Transfer Secure transfer of authentication key(s) to the TOE  OE.AuthKey_Unique Uniqueness of the authentication key(s)  OE.TOE_PublicKeyAuth_Transfer Secure transfer of public authentication key(s) of the TOE  OE_TOE_Construction Construction of the TOE by the Personalisation_Agent 4.3.7 Additional SFRs All the SFRs from the protection profiles are maintained. The following SFRs have been added to cover supplemental features: Additional SFRs Rationale FCS_CKM.1 /Session keys Generation of secure messaging session keys FCS_CKM.1/Keys Generation of authentication and eServices keys FCS_CKM.4/Session keys Destruction of secure messaging session keys FCS_COP.1/DH Computation Cryptographic operation : Diffie Hellman 39/128 4.3.8 Package conformance The protection profiles require an assurance level of level EAL4 augmented with AVA_VAN.5. This security target considers an assurance level EAL5 augmented with AVA_VAN.5 and ALC_DVS.2, which still complies with the requirements of the protection profiles. FCS_COP.1/SM in Confidentiality Cryptographic operation : protection in confidentiality of APDU FCS_COP.1/SM in Integrity Cryptographic operation : protection in integrity and authenticity of APDU FCS_COP.1/data hashing Cryptographic operation : Data hashing FCS_COP.1/C/S Auth Cryptographic operation : C/S Authentication FCS_COP.1/Enc key decipherment Cryptographic operation : Encryption key decipherment FCS_COP.1/Sym Role Auth Cryptographic operation : symmetric role authentication FCS_COP.1/Sym Device Auth Cryptographic operation : symmetric device authentication FCS_COP.1/Certificate Verification Cryptographic operation : Certificate verification FCS_COP.1/Asym Role Auth Cryptographic operation : asymmetric role authentication FCS_COP.1/Asym Internal DAPP Auth Cryptographic operation : asymmetric internal DAPP Authentication FCS_COP.1/Asym External DAPP Auth Cryptographic operation : asymmetric external DAPP Authentication FCS_COP.1/GP Auth Cryptographic operation : GP authentication FCS_COP.1/GP secret data protection Cryptographic operation : GP secret data protection FCS_RNG.1 Cryptographic operation : Random number generation FDP_ACC.1/IASECC Administration Access control policy for the administration operation of IAS ECC FDP_ACC.1/Key Management Access control policy for the key management operations FDP_ACF.1/IASECC Administration Access control rules for the administration operation of IAS ECC FDP_ACF.1/Key Management Access control rules for the key management operations FDP_ETC.1/Keys Export of keys FDP_ITC.1/ Keys Import of keys FIA AFL.1/Auth keys Management of wrong authentication with mechanisms based on cryptographic keys FMT_MSA.1/TOE Management Management of Access rights for IAS ECC administration operations FMT_MSA.1/Key Management Management of Access rights for key management operations FMT_MTD.1/SCD and SCD_ID Link between a SCD and an identifier FMT_MTD.1/TOE Serial number Loading of the TOE serial number FMT_MTD.1/TOE State Transition of the life cycle of the TOE from phase 6 to phase 7 FMT_MTD.1/Unblock Unlocking of RAD by the administrator 40/128 SECURITY PROBLEM DEFINITION 5.1 Assets and users 5.1.1 Assets 5.1.1.1 Assets from protection profiles: User Data 1. SCD: private key used to perform an electronic signature operation. The confidentiality, integrity and signatory’s sole control over the use of the SCD must be maintained. 2. SVD: public key linked to the SCD and used to perform electronic signature verification. The integrity of the SVD when it is exported must be maintained. 3. DTBS and DTBS/R: set of data, or its representation, which the signatory intends to sign. Their integrity and the unforgeability of the link to the signatory provided by the electronic signature must be maintained. 5.1.1.2 Additional Assets : TSF Data 1. Keys: a. Private or secret keys used to authenticate an external user or entity, or to perform eServices. Their integrity and confidentiality must be maintained b. public key used to perform eServices. Their integrity must be maintained. Note: Diffie Hellman parameters are considered as keys in the rest of the document. 2. RAD: Reference PIN code or biometrics authentication reference used to identify and authenticate the End User (integrity and confidentiality of RAD must be maintained) 3. VAD: PIN code or biometrics data entered by the End User to perform a signature operation (confidentiality and authenticity of the VAD as needed by the authentication method employed) 4. Session keys: Keys computed for secure messaging and used to ensure confidentiality and integrity of data. 41/128 5.1.2 Subjects 1. User: End user of the TOE who can be identified as administrator or signatory. The subject S.User may act as S.Admin in the role R.Admin or as S.Sigy in the role R.Sigy. 2. Administrator: User who is in charge to perform the TOE initialisation, TOE (pre-) personalization or other TOE administrative functions. The subject S.Admin is acting in the role R.Admin for this user after successful authentication as administrator. The CSP (Certificate Service Provider) who is in charge of generating SCD/SVD key pair and importing SCD also counts as Administrator. (Subject from PP). The following refinements of R.Admin may appear in this document:  Personalisation Agent: Administrator in charge of the personalisation in phase 6  User_Admin: User with administrative rights in phase 7  SCA: Signature Creation application  HID: Human Interface Device  IFD: Interface Device 3. TOE_Administrator: Administrator in phase 7 in charge of the TOE management (Additional Subject). 4. Signatory: User who holds the TOE and uses it on their own behalf or on behalf of the natural or legal person or entity they represent. The subject S.Sigy is acting in the role R.Sigy for this user after successful authentication as signatory. (Subject from PP). 5.2 Threats 5.2.1 Threats drawn from the protection profiles 5.2.1.1 T.SCD_Divulg Storing, copying and releasing of the signature creation data An attacker stores or copies the SCD outside the TOE. An attacker can obtain the SCD during generation, storage and use for signature creation in the TOE. 5.2.1.2 T.SCD_Derive Derive the signature creation data An attacker derives the SCD from publicly known data, such as SVD corresponding to the SCD or signatures created by means of the SCD or any other data exported outside the TOE, which is a threat against the secrecy of the SCD. 42/128 5.2.1.3 T.Hack_Phys Physical attacks through the TOE interfaces An attacker interacts physically with the TOE to exploit vulnerabilities, resulting in arbitrary security compromises. This threat is directed against SCD, SVD and DTBS. 5.2.1.4 T.SVD_Forgery Forgery of the signature verification data An attacker forges the SVD presented by the CSP to the CA. This results in loss of SVD integrity in the certificate of the signatory. 5.2.1.5 T.SigF_Misuse Misuse of the signature creation function of the TOE An attacker misuses the signature creation function of the TOE to create SOD for data the signatory has not decided to sign. The TOE is subject to deliberate attacks by experts possessing a high attack potential with advanced knowledge of security principles and concepts employed by the TOE. 5.2.1.6 T.DTBS_Forgery Forgery of the DTBS/R An attacker modifies the DTBS/R sent by the SCA. Thus the DTBS/R used by the TOE for signing does not match the DTBS the signatory intended to sign. 5.2.1.7 T.Sig_Forgery Forgery of the electronic signature An attacker forges a signed data object, maybe using an electronic signature, which has been created by the TOE, and the violation of the integrity of the signed data object is not detectable by the signatory or by third parties. The signature created by the TOE is subject to deliberate attacks by experts possessing a high attack potential with advanced knowledge of security principles and concepts employed by the TOE. 5.2.2 Additional threats 5.2.2.1 T.Key_Divulg Storing, copying, and releasing of a key stored in the TOE An attacker can store, copy an authentication or eService key stored in the TOE outside the TOE. An authentication key may be either used to authenticate an external entity or the TOE, and may be symmetric or asymmetric. An attacker can release an authentication or eService key during generation, storage and use in the TOE. 5.2.2.2 T.Key_Derive Derive a key An attacker derives an authentication key (of the TOE or an external entity) or eService key from public known data, such as the corresponding public key or cryptogram created by means of the key or any other data communicated outside the TOE, which is a threat against the secrecy of the key. 43/128 5.2.2.3 T.TOE_PublicAuthKey_ForgeryForgery of the public key of a TOE authentication key An attacker forges the public key of a TOE authentication key presented by the TOE. This results in loss of the public key integrity in the authentication certificate of the TOE. 5.2.2.4 T.Authentication_Replay Replay of an authentication of an external entity An attacker retrieves by observation authentication data used by a third party during an authentication sequence. The attacker tries to replay this authentication sequence to grant access to the TOE. 5.3 Organisational Security Policies 5.3.1 Security policies drawn from the protection profiles 5.3.1.1 P.CSP_QCert Qualified certificate The CSP uses a trustworthy CGA to generate a qualified certificate or non-qualified certificate (cf. [directive], article 2, clause 9, and Annex I) for the SVD. The certificates contain at least the name of the signatory and the SVD matching the SCD implemented in the TOE under sole control of the signatory. The CSP ensures that the use of the TOE as SSCD is evident with signatures through the certificate or other publicly available information. 5.3.1.2 P.Qsign Qualified electronic signatures The signatory uses a signature creation system to sign data with an advanced electronic signature (cf. the directive, article 1, clause 2), which is a qualified electonic signature if it is based on a valid qualified certificate (according to the directive, annexe I)1. The DTBS are presented to the signatory and sent by the SCA as DTBS/R to the SSCD. The SSCD creates the electonic signature created with a SCD implemented in the SSCD that the signatory maintain under their sole control and is linked to the DTBS/R in such manner that any subsequent change of the data is detectable. 5.3.1.3 P. Sigy_SSCD TOE as secure signature creation device The TOE meets the requirements for an SSCD laid down in Annex III of the directive. This implies the SCD is used for digital signature creation under the sole control of the signatory and the SCD can pratically occur only once. 1 It is a non-qualified advanced electronic signature if it is based in a non-qualified certificate for the SVD 44/128 5.3.1.4 P.Sig_Non-Repud Non-repudiation of signatures The lifecycle of the SSCD, the SCD and the SVD shall be implemented in a way that the signatory is not able to deny having signed data if the signature is successfully verified with the SVD contained in their unrevoked certificate. 5.3.2 Additional security policies 5.3.2.1 P.LinkSCD_QualifiedCertificate Link between a SCD stored in the TOE and the relevant qualified certificate The Role in charge of creating and updating the SCD (Personalisation Agent, R.Admin, R.Sigy), or the trusted IT entity involved in the updating process (CSP) shall ensure an unambiguous link between the (qualified) certificate(s) and the matching SCD(s). This link might be figured out by a PKCS#15 structures, an XML structure, an identifier .linking the file containing the (qualified) certificate or the URL hosting them to the SCD(s) loaded in the TOE. In particular, it implies this link updated, each time the SCD(s) is created, imported, erased or generated. 5.3.2.2 P.TOE_PublicAuthKey_Cert Certificate for asymmetric TOE authentication keys The TOE contains certificate(s) issued by a known entity ensuring its public key corresponding to its private key used for authentication is genuine. 5.3.2.3 P.TOE_Construction Construction of the TOE by the Personalization Agent The recommendations indicated in [AGD_PRE] required to construct the TOE are correctly applied. 5.3.2.4 P.eServices Provision of eServices The TOE provides eServices Mechanisms enabling to:  decrypt encryption keys  authenticate the TOE  verify CVC certificates Moreover the TOE ensures the keys it uses are genuine by enforcing an access control over the keys update, in order to ensure that only entitled entities can change key values. 45/128 5.4 Assumptions 5.4.1 A.CGA Trustworthy certificate generation application The CGA protects the authenticity of the signatory’s name or pseudonym and the SVD in the (qualified) certificate by an advanced electronic signature of the CSP. 5.4.2 A.SCA Trustworthy signature creation application The signatory uses only a trustworthy SCA. The SCA generates and sends the DTBS/R of the data the signatory wishes to sign in a form appropriate for signing by the TOE. 5.4.3 A.CSP Secure SCD/SVD management by SCD The CSP uses only a trustworthy SCD/SVD generation device and ensures that this device can be used by authorised user only. The CSP ensures that the SCD generated practically occurs only once, that generated SCD and SVD actually correspond to each other and that SCD cannot be derived from the SVD. The CSP ensures the confidentiality of the SCD during generation and export to the TOE, does not use the SCD for creation of any signature and irreversibly deletes the SCD in the operational environment after export to the TOE. 46/128 SECURITY OBJECTIVES 6.1 Security Objectives for the TOE 6.1.1 Security Objectives drawn from the protection profiles 6.1.1.1 OT.Lifecycle_Security Lifecycle security The TOE shall detect flaws during the initialisation, personalisation and operational usage. The TOE shall securely destroy the SCD on demand of the signatory. 6.1.1.2 OT.SCD/SVD_Auth_Gen Authorized SCD/SVD generation The TOE shall provide security features to ensure that authorized users only may invoke the generation of the SCD and the SVD. 6.1.1.3 OT.SCD_Unique Uniqueness of the signature creation data The TOE shall ensure the cryptographic quality of an SCD/SVD pair it creates as suitable for the advanced or qualified electronic signature. The SCD used for signature creation shall practically occur only once and shall not be reconstructable from the SVD. In that context ‘practically occur once’ means that the probability of equal SCDs is negligible. 6.1.1.4 OT.SCD_SVD_Corresp Correspondence between SVD and SCD The TOE shall ensure the correspondence between the SVD and the SCD generated by the TOE. This includes unambiguous reference of a created SVD/SCD pair for export of the SVD and in creating an electronic signature creation with the SCD. 6.1.1.5 OT.SCD_Auth_Imp Authorized SCD import The TOE shall provide security features to ensure that authorized users only may invoke the import of the SCD 6.1.1.6 OT.SCD_Secrecy Secrecy of the signature creation data The secrecy of the SCD (used for signature creation) shall be reasonably assured against attacks with a high attack potential. 47/128 6.1.1.7 OT.Sig_Secure Cryptographic security of the electronic signature The TOE shall create digital signatures that cannot be forged without knowledge of the SCD through robust encryption techniques. The SCD shall not be reconstructable using the digital signatures or any other data exportable from the TOE. The digital signatures shall be resistant against these attacks, even when executed with a high attack potential. 6.1.1.8 OT.Sigy_SigF Signature creation function for the legitimate signatory only The TOE shall provide the digital signature creation function for the legitimate signatory only and protects the SCD against the use of others. The TOE shall resist attacks with high attack potential. 6.1.1.9 OT.DTBS_Integrity_TOE DTBS/R integrity inside the TOE The TOE must not alter the DTBS/R. As by definition of the DTBS/R this may consist of the DTBS themselves, this objective does not conflict with a signature creation process where the TOE hashes the provided DTBS (in part or entirely) for signature creation. 6.1.1.10 OT.EMSEC_Design Provide physical emanations security The TOE shall be designed and built in such a way as to control the production of intelligible emanations within specified limits. 6.1.1.11 OT.Tamper_ID Tamper detection The TOE shall provide system features that detect physical tampering of its components, and uses those features to limit security breaches. 6.1.1.12 OT.Tamper_Resistance Tamper resistance The TOE shall prevent or resist physical tampering with specified system devices and components. 6.1.1.13 OT.TOE_SSCD_Auth Authentication proof as SSCD The TOE shall hold unique identity and authentication data as SSCD and provide security mechanisms to identify and to authenticate itself as SSCD. 6.1.1.14 OT.TOE_TC_SVD_ExpTOE trusted channel for SVD export The TOE shall provide a trusted channel to the CGA to protect the integrity of the SVD exported to the CGA. The TOE shall enable the CGA to detect alteration of the SVD exported by the TOE. 48/128 6.1.1.15 OT.TOE_TC_VAD_Imp Trusted channel of TOE for VAD import The TOE shall provide a trusted channel for the protection of the confidentiality and integrity of the VAD received from the HID as needed by the authentication method emloyed 6.1.1.16 OT.TOE_TC_DTBS_Imp Trusted channel of the TOE for DTBS import The TOE shall provide a trusted channel to the SCA to detect alteration of the DTBS/R received from the SCA. The TOE must not generate electronic signatures with the SCD for altered DTBS. 6.1.2 Additional Security Objectives for the TOE 6.1.2.1 OT.Authentication_Secure Secure authentication mechanisms The TOE provides strong mechanism to authenticate external users/entity and mechanisms to establish a strong trusted channel with an external IT entity. The authentication protocols rely on cryptographic schemes that are based on either symmetric or asymmetric cryptography. The TOE uses freshly generated random number in the authentication mechanism in order to avoid replay attacks. The authentication protocols ensure that the cryptogram can not be forged without the knowledge of the authentication key, and that they can not be reconstructed from the authentication cryptograms. The trusted channel ensures integrity, authenticity, and confidentiality of the data using strong encryption techniques. The trusted channel ensures protection against deletion, and modification of commands. Moreover the TOE ensures the key its uses are genuine by enforcing an access control over the authentication keys update, in order to ensure that only entitled entities can change key values. 6.1.2.2 OT.SCD/SVD_Management Management of SCD/SVD The TOE enables to manage SCD/SVD. Each key (pair) and RAD may be created at any time and used to perform qualified signature during the TOE life time. Several SCD, SVD, and RAD may be present on the TOE and used by the same holder. The TOE guarantees the SCD, SVD and RAD are independent from each other. 6.1.2.3 OT.Key_Lifecycle_Security Life cycle security of the keys stored in the TOE The TOE shall detect flaws during the initialisation, personalisation and operational usage. The TOE shall provide safe destruction techniques for the authentication keys (of the TOE and/or the external entities) and eServices keys it stores in case of erasure, re-import or re-generation. 49/128 6.1.2.4 OT.Keys_Secrecy Secrecy of Keys The secrecy of the authentication keys (of the TOE and/or the external entities) and eServices keys stored in the TOE is reasonably assured against attacks with a high attack potential. 6.1.2.5 OT.TOE_AuthKey_Unique Uniqueness of the TOE authentication key(s) The TOE shall ensure the cryptographic quality of the asymmetric authentication key pair used for the TOE authentication. The private key used for TOE authentication can practically occur only once and cannot be reconstructed from the public key. In that context ‘practically occur once’ means that the probability of equal TOE authentication key is negligible low. 6.1.2.6 OT.Lifecycle_Management Management of the life cycle The TOE provides a life cycle management enabling to separate its life cycle in two main phases. The first one (phase 6) is the one during the TOE is under the sole control of the Personalization Agent. The following operation may be realized:  The SCD, SVD and keys may be created, generated, imported or erased  The RAD (s) may be created and loaded  SVD and public keys may be exported Once performed, the Personalisation Agent switches the TOE in phase 7. This transition is irreversible leaving the TOE under the sole control of the R.Sigy, R.Admin and the TOE_Administrator according to the security rules set by the Personalisation Agent. 6.1.2.7 OT.eServices Provision of eServices The TOE provides eServices Mechanisms enabling to:  decrypt encryption keys  authenticate the TOE  verify CVC certificates Moreover the TOE ensures the key its uses are genuine by enforcing an access control over the keys update, in order to ensure that only entitled entities can change key values. 50/128 6.2 Security Objectives for the Operational Environment 6.2.1 Security Objectives drawn from the protection profiles 6.2.1.1 OE.SVD_Auth Authenticity of the SVD The operational environment shall ensure the integrity and authenticity of the SVD sent to the CGA of the CSP. The CGA verifies the correspondence between the SCD in the SSCD of the signatory and the SVD in the qualified certificate. 6.2.1.2 OE.CGA_QCert Generation of qualified certificates The CGA shall generate a qualified certificate that includes (amongst others) (a) the name of the signatory controlling the TOE, (b) the SVD matching the SCD stored in the TOE and being under sole control of the signatory, (c) the advanced signature of the CSP. The CGA shall confirm with the generated qualified certificate that the SCD corresponding to the SVD is stored in a SSCD. 6.2.1.3 OE.Dev_Prov_Service Authentic SSCD provided by SSCD Provisionning Service The SSCD provisionning service handles authentic devices that implement the TOE, prepares the TOE for proof as SSCD to external entities, personalises the TOE for the legitimate user as signatory, links the identity of the TOE as SSCD with the identity of the legitimate user, and delivers the TOE to the signatory. 6.2.1.4 OE.HID_TC_VAD_Exp Trusted channel of HID for VAD export The HID provides the human interface for user authentication. The HID will ensure confidentiality and integrity of the VAD as needed by the authentication method employed including export to the TOE by means of a trusted channel. 6.2.1.5 OE.DTBS_Intend SCA sends data intended to be signed The signatory shall use a trustworthy SCA that - generates the DTBS/R of the data that has been presented as DTBS and which the signatory intends to sign in a form which is appropriate for signing by the TOE, - sends the DTBS/R to the TOE and enables verification of the integrity of the DTBS/R by the TOE, - attaches the signature produced by the TOE to the data or provides it separately. 51/128 6.2.1.6 OE.SCA_TC_DTBS_Exp Trusted channel of SCA for DTBS export The SCA provides a trusted channel to the TOE for the protection of the integrity of the DTBS to ensure that the DTBS/R cannot be altered undetected in transit between the SCA and the TOE. 6.2.1.7 OE.Signatory Security obligation of the signatory The signatory shall check that the SCD stored in the SSCD received from SSCD-provisioning service is in non-operational state. The signatory shall keep their VAD confidential. 6.2.1.8 OE.SCD/SVD_Auth_Gen Authorized SCD/SVD generation The CSP shall provide security features to ensure that authorised users only may invoke the generation of the SCD and the SVD. 6.2.1.9 OE.SCD_Secrecy SCD Secrecy The CSP shall protect the confidentiality of the SCD during the generation and export to the TOE. The CSP shall not use the SCD for creation of any signature and shall irreversibly delete the SCD in the operational environment after export to the TOE. 6.2.1.10 OE.SCD_Unique Uniqueness of the signature creation data The CSP shall ensure the cryptographic quality of the SCD/SVD pair, which is generated in the environment, for the qualified or advanced electronic signature. The SCD used for signature creation shall paractically occur only once, i.e. the probability of equal SCDs shall be negligible, and the SCD shall not be reconstructable from the SVD. 6.2.1.11 OE.SCD_SVD_CorrespCorrespondance between SVD and SCD The CSP shall ensure the correspondance between the SVD and the SCD generated by the CSP. This includes the correspondence between the SVD send to the CGA and the SCD exported to the TOE of the signatory identified in the SVD certificate. 6.2.1.12 OE.CGA_SSCD_Auth Pre-initialisation of the TOE for SSCD authentication The CSP shall check by means of the CGA whether the device presented for application of a (qualified) certificate holds unique identification as SSCD, successfully proved this identity as SSCD to the CGA, and whether this identity is linked to the legitimate holder of the device as applicant for the certificate. 52/128 6.2.1.13 OE.CGA_TC_SVD_ImpCGA trusted channel for SVD import The CGA shall detect alteration of the SVD imported from the TOE with the claimed identity of the SSCD. 6.2.2 Additional security objectives for the operational environment 6.2.2.1 OE.LinkSCD_QualifiedCertificate Link betwaan SCD stored in the TOE and the relevant qualified certificate The role in charge of creating and updating the SCD (Personalisation Agent, R.Admin, R.Sigy), or the trusted IT entity involved in the updating process (the CSP) shall ensure an unambiguous link between the (qualified) certificate(s) and the matching SCD(s). This link might be figured out by a PKCS#15 structures, an XML structure, an identifier .linking the file containing the (qualified) certificate or the URL hosting them to the SCD(s) loaded in the TOE. In particular, it implies this link is updated, each time the SCD(s) is created, imported, erased or generated. 6.2.2.2 OE.AuthKey_Transfer Secure transfer of authentication key(s) to the TOE The entity in charge of generating the authentication keys to be loaded in the TOE shall ensure the confidentiality of the key(s) transferred to the TOE. 6.2.2.3 OE.AuthKey_Unique Uniqueness of the authentication key(s) The entity in charge of generating the authentication keys to be loaded in the TOE shall ensure the cryptographic quality of the authentication key(s). The authentication key used for authentication can practically occur only once and, in case of a TOE authentication key cannot be reconstructed from its public portion. In that context ‘practically occur once’ means that the probability of equal keys is negligible low. 6.2.2.4 OE.TOE_PublicKeyAuth_Transfer Secure transfer of public authentication key(s) of the TOE The entity in charge of generating the authentication certificate from the TOE’s authentication public key generated in the TOE shall ensure the authenticity of this data when transferred from the TOE. This may be achieved by the retrieval of the public key according to certain rules imposed to the TOE holders. 6.2.2.5 OE_TOE_Construction Construction of the TOE by the Personalisation_Agent The Personalization Agent in charge of administrating the TOE in phase 6 shall be a trusted person and shall be skilled enough to correctly apply the recommendations indicated in [AGD_PRE]. These recommendations are required to construct the TOE. 53/128 6.3 Security Objectives Rationale 6.3.1 Security objectives backtracking T.SCD_Divulg T.SCD_Derive T.Hack_Phys T.SVD_Forgery T.SigF_Misuse T.DTBS_Forgery T.Sig_Forgery T.Key_Divulg T.Key_Derive T.TOE_PublicAuthKey_Forger y T.Authentication_Replay P.CSP_QCert P.QSign P.Sigy_SSCD P.Sig_Non-Repud P.LinkSCD_QualifiedCertificat e P.TOE_Construction P.TOE_PublicAuthKey_Cert P.eServices A.CGA A.SCA A.CSP OT.Lifecycle_Security X X X X OT.SCD/SVD_Auth_Gen X X OT.SCD_Unique X X X OT.SCD_SVD_Corresp X X X OT.SCD_Auth_Imp X X X OT.SCD_Secrecy X X X X OT.Sig_Secure X X X X X OT.Sigy_SigF X X X X OT.DTBS_Integrity_TOE X X X X OT.EMSEC_Design X X X OT_Tamper_ID X X OT_Tamper_Resistance X X X OT_TOE_SSCD_Auth X X X OT.TOE_TC_SVD_Exp X X X OT.TOE_TC_VAD_Imp X X OT.TOE_TC_DTBS_Imp X X X OT.Authentication_Secure X X OT.SCD/SVD_Management X OT.Key_Lifecycle_Security X OT.Keys_Secrecy X X 54/128 OT.TOE_AuthKey_Unique X OT.Lifecycle_Management X OT.eServices X OE.SVD_Auth X X X OE.CGA_QCert X X X X X OE.Dev_Prov_Service X X OE.HID_TC_VAD_Exp X X OE.DTBS_Intend X X X X X OE.SCA_TC_DTBS_Exp X X X OE.Signatory X X OE.SCD/SVD_Auth_Gen X X X X X OE.SCD_Secrecy X X X X OE.SCD_Unique X X X X X OE.SCD_SVD_Corresp X X X X OE.CGA_SSCD_Auth X X X OE.CGA_TC_SDV_Imp X X X OE.LinkSCD_QualifiedCertificate X X OE.AuthKey_Transfer X OE.AuthKey_Unique X OE.TOE_PublicKeyAuth_Transfer X X OE.TOE_Construction X 55/128 6.3.2 Security objectives sufficiency T.SCD_Divulg (storing,copying and releasing of the signature creation data) adresses the threat against the legal validity of electronic signature due to storage and copying of SCD outside the TOE, as expressed in recital (18) of the directive. This threat is countered by:  OT.SCD_Secrecy, which assures the secrecy of the SCD used by the TOE for signature creation  OE.SCD_Secrecy, which assures the secrecy of the SCD in the CSP environment Furthermore, generation and/or import of SCD known by an attacker is countered by OE.SCD/SVD_Auth_Gen, which ensures that only authorized SCD generation in the environment is possible, and OT.SCD_Auth_Imp, which ensures that only SCD import is possible. T.SCD_Derive (Derive the signature creation data) deals with the attacks on the SCD via public known data produced by the TOE, which are the SVD and the signatures created with the SCD. This threat is countered by:  OT.SCD/SVD_Auth_Gen by implementing cryptographically secure generation of the SCD/SVD pair.  OT.Sig_Secure, which ensures cryptographically secure electronic signature.  OE.SCD_Unique by implementing cryptographically secure generation of the SCD/SVD pair T.Hack_Phys (Exploitation of physical vulnerabilities) deals with physical attacks exploiting physical vulnerabilities of the TOE. OT.SCD_Secrecy preserves the secrecy of the SCD. OT_EMSEC_Design counters physical attacks through the TOE interfaces and observation of TOE emanations. OT.Tamper_ID and OT.Tamper_Resistance counter the threat T.Hack_Phys by detecting and resisting tampering attacks. OT.Keys_Secrecy preserves the secrecy of all the authentication and eServices keys stored in the TOE. T.SVD_Forgery (Forgery of the signature verification data) deals with the forgery of the SVD given to the CGA for certificate generation. T.SVD_Forgery is addressed by  OT.SCD_SVD_Corresp, which ensures correspondence between SCD and SVD and unambiguous reference of the SCD/SVD pair for the SVD export and signature creation with the SCD  OE.SCD_SVD_Corresp, wich ensures correspondence between SVD and SCD  OE.SVD_Auth that ensures the integrity of the SVD given to the CGA of the CSP and verification of the correspondence between the SCD in the SSCD of the signatory and the SVD in the input it provides to the certificate generation function of the CSP.  OT.TOE_TC_SVD_Exp, which ensures that the TOE sends the SVD in a verifiable form through a trusted channel to the CGA  OE.CGA_TC_SVD_Imp, which provides verification of SVD authenticity by the CGA T.SigF_Misuse (Misuse of the signature creation function of the TOE) addreses the threat of misuse of the TOE signature creation function to create SDO by others than the signatory to create an electonic signature on data which the signatory has not expressed the intent to sign, as required by paragraph 1(c) of Annex III. OT.Lifecycle_Security (Lifecycle security) requires the TOE to detect flaws during initialisation, personalisation and operational usage including secure destruction of the SCD, which may be initiated by the signatory. OT_Sigy_SigF (Signature creation function for the legitimate signatory only) ensures 56/128 that the TOE provides the signature creation function for the legitimate signatory only. OE_DTBS_Intend (Data intended to be signed) ensures that the SCA sends the DTBS/R only for data the signatory intends to sign. The combination of OT.TOE_TC_DTBS_Imp (Trusted channel of TOE for DTBS) and OE.SCA_TC_DTBS_Exp (Trusted channel of SCA for DTBS) counters the undetected manipulation of the DTBS during the tranmsission from the SCA to the TOE. OT.DTBS_Integrity_TOE (DTBS/R integrity inside the TOE) prevents the DTBS/R from alteration inside the TOE. If the SCA provides a human interface for user authentication, OE.HID_TC_VAD_Exp (Trusted channel of HID for VAD) requires the HID to protect the confidentiality and integrity of the VAD as needed by the authentication method employed. The HID and the TOE will protect the VAD by a trusted channel between the HID and the TOE according to OE.HID_TC_VAD_Exp (Trusted channel of HID for VAD) and OT.TOE_TC_VAD_Imp (Trusted channel of TOE for VAD). OE.Signatory ensures that the signatory checks that an SCD stored in the SSCD when received from an SSCD-Provisioning service provider is in non-operational state, i.e. the SCD cannot be used before the signatory becomes control over the SSCD. OE.signatory ensures also that the signatory keeps their VAD confidential. OT.LifeCycle_Management ensures that when the TOE is under the Personalisation Agent control, it can not be misused to sign on behalf of the legitimate Signatory. T.DTBS_Forgery (Forgery of the DTBS/R) addresses the threat arising from modifications of the DTBS/R sent to the TOE for signing which than does not correspond to the DTBS/R corresponding to the DTBS the signatory intends to sign. The threat T.DTBS_Forgery is addressed by the security objectives OT.TOE_TC_DTBS_Imp (Trusted channel of TOE for DTBS) and OE.SCA_TC_DTBS_Exp (Trusted channel of SCA for DTBS), which ensure that the DTBS/R is sent through a trusted channel and cannot be altered undetected in transit between the SCA and the TOE. The TOE counters internally this threat by the means of OT.DTBS_Integrity_TOE (DTBS/R integrity inside the TOE) ensuring the integrity of DTBS/R inside the TOE. The TOE IT environment also addresses T.DTBS_Forgery by the means of OE.DTBS_Intend, which ensures that the trustworthy SCA generates the DTBS/R of the data that has been presented as DTBS and which the signatory intends to sign in a form appropriate for signing by the TOE. T.Sig_Forgery (Forgery of the electronic signature) deals with non-detectable forgery of the electronic signature. OT.Sig_Secure, OT.SCD_Unique, OE.SCD_Unique and OE.CGA_QCert address this threat in general. OT.Sig_Secure (Cryptographic security of the electronic signature) ensures by means of robust cryptographic techniques that the signed data and the electronic signature are securely linked together. OT.SCD_Unique and OE.SCD_Unique ensure that the same SCD cannot be generated more than once and the corresponding SVD cannot be included in another certificate by chance. OE.CGA_QCert prevents forgery of the certificate for the corresponding SVD, which would result in false verification decision concerning a forged signature. T.Key_Divulg addresses the threat against the (1) authentication key of the TOE, (2) the authentication keys of entities and (3) the eServices keys stored in the TOE due to storage and copying of key(s) outside the TOE. This threat is countered by OT.Keys_Secrecy which assures the secrecy of the keys stored and used by the TOE. OE.AuthKey_Transfer ensures the confidentiality of the authentication keys transferred to the TOE. OT.Key_Lifecycle_Security (Lifecycle security) ensures the secrecy of the keys stored in the TOE during the whole life of the TOE. T.Key_Derive deals with attacks on authentication and eServices keys via public known data produced or received by the TOE (public key, authentication cryptogram,…). This threat is countered by OE.AuthKey_Unique (in case of import) and OT.TOE_AuthKey_Unique (in case of TOE’s authentication key generation) that provides cryptographic secure generation of the keys. OT.Authentication_Secure ensures secure authentication cryptograms. 57/128 T.TOE_PublicAuthKey_Forgery deals with the forgery of the TOE’s public key used for authentication exported by the TOE to an entitled entity for the generation of the certificate. This is addressed by OE.TOE_PublicAuthKey_Transfer which ensures the authenticity of the TOE’s public key for authentication. T.Authentication_Replay deals with the threats when an attacker retrieves an authentication cryptogram presented to the TOE by an entity and presents it again to the TOE in order to grant some rights and gain access to some data on the TOE. This threat is addressed by OT.Authentication_Secure that ensures the authentication cryptogram can not be replayed as they rely on random data internally generated by the TOE. Enforcement of OSPs by security objectives P.CSP_QCert (CSP generates qualified certificates) establishes the CSP generating qualified certificate or non-qualified certificate linking the signatory and the SVD implemented in the SSCD under sole control of this signatory. P.CSP_QCert is addressed by  OT.Lifecycle_Security, which requires the TOE to detect flaws during the initialisation, personalisation and operational usage,  OT.SCD_SVD_Corresp, which requires to ensure the correspondance between the SVD and the SCD during their generation, and ensures that the SVD exported by the TOE to the CGA corresponds to the SCD stored in the TOE and used by the signatory.  OE.CGA_QCert for generation of qualified certificates or non-qualified certificates which requires the CGA to certify the SVD matching the SCD implemented in the TOE under sole control of the signatory.  OE.SCD/SVD_Auth_Gen, which ensures that the SCD/SVD generation can be invoked by authorized users only,  OT.SCD_Auth_Imp which ensures that authorised users only may invoke the import of the SCD,  OE.SCD_SVD_Corresp, which requires the CSP to ensure the correspondence between the SVD and the SCD during their generation,  OT.TOE_SSCD_Auth, which ensures that the copies of the TOE will hold unique identity and authentication data as SSCD and provide security mechanisms enabling the CGA to identify and to authenticate the TOE as SSCD to prove this identity as SSCD to the CGA,  OE.CGA_SSCD_Auth, ensures that the SP checks the proof of the device presented of the applicant that it is a SSCD. P.QSign (Qualified electronic signatures) provides that the TOE and the SCA may be employed to sign data with an advanced electronic signature, which is a qualified electronic signature if based on a valid qualified certificate. OT.Sigy_SigF ensures signatory’s sole control of the SCD by requiring the TOE to provide the signature creation function for the legitimate signatory only and to protect the SCD against the use of others. OT.Sig_Secure ensures that the TOE creates electronic signatures, which cannot be forged without knowledge of the SCD through robust encryption techniques. OE.CGA_QCert addresses the requirement of qualified or non-qualified electronic certificates building a base for the electronic signature. OE.DTBS_Intend ensures that the SCA provides only those DTBS to the TOE, which the signatory intends to sign. P.Sigy_SSCD (TOE as secure signature creation device) requires the TOE to meet Annex III. This is ensured as follows:  OT.SCD_Unique and OE.SCD_Unique meet the paragraph 1(a) of Annex III, by the requirements that the SCD used for signature creation can practically occur only once; 58/128  OT.SCD_Unique, OE.SCD_Unique, OT.SCD_Secrecy and OT.Sig_Secure meet the requirement in paragraph 1(a) of Annex III by the requirements to ensure secrecy of the SCD. OT.EMSEC_Design and OT.Tamper_Resistance address specific objectives to ensure secrecy of the SCD against specific attacks;  OT.SCD_Secrecy and OT.Sig_Secure meet the requirement in paragraph 1(b) of Annex III by the requirements to ensure that the SCD cannot be derived from SVD, the electronic signatures or any other data exported outside the TOE;  OT.Sigy_SigF and OE.SCD_Secrecy meet the requirement in paragraph 1(c) of Annex III by the requirements to ensure that the TOE provides the signature creation function for the legitimate signatory only and protects the SCD against the use of others;  OT.DTBS_Integrity_TOE meets the requirements in paragraph 2 of Annex III as the TOE must not alter the DTBS/R. Paragraph 2 of Annex III, requires that an SSCD does not prevent the data to be signed from being presented to the signatory prior to the signature process is obviously fulfilled by the method of TOE usage: the SCA will present the DTBS to the signatory and send it to the SSCD for signing. The usage of SCD under sole control of the signatory is ensured by  OT.Lifecycle_Security requiring the TOE to detect flaws during the initialisation, personalisation and operational usage,  OT.SCD/SVD_Auth_Gen and OE.SCD/SVD_Auth_Gen which limit invocation of the generation of the SCD and the SVD to authorized users only,  OT.SCD_Auth_Imp, which limits the SCD import to authorised users only,  OE.SCD_Secrecy, which ensures the confidentiality of the SCD during generation and export to the TOE, and deletes the SCD after export to the TOE. The CSP does not use the SCD for signature creation,  OT.Sigy_SigF, which requires the TOE to provide the signature creation function for the legitimate signatory only and to protect the SCD against the use of others. OE.Dev_Prov_Service ensures that the legitimate user obtains a TOE sample as an authentic, initialised and personalised TOE from an SSCD Provisionning Service through the TOE delivery procedure. If the TOE implements SCD generated under control of the SSCD Provisionning Service the legitimate user receives the TOE as SSCD. If the TOE delivered to the legitimate user without SCD in the operational phase he or she applies for the (qualified) certificate as the Device holder and legitimate user of the TOE. The CSP will use the TOE security feature (addressed by the security objectives OT.TOE_SSCD_Auth and OT.TOE_TC_SVD_Exp) to check whether the device presented is a SSCD linked to the applicant as required by OE.CGA_SSCD_Auth and the received SVD is sent by this SSCD as required by OE.CGA_TC_SVD_Imp. Thus the obligation of the SSCD provision service for the first SCD/SVD pair is complemented in an appropriate way by the CSP for the SCD/SVD pair generated outside the secure preparation environment. P.Sig_Non-Repud (Non-repudiation of signatures) deals with the repudiation of signed data by the signatory, although the electronic signature is successfully verified with the SVD contained in their certificate valid at the time of signature creation. This policy is implemented by the combination of the security objectives for the TOE and its operational environment, which ensures the aspects of signatory’s sole control over and responsibility for the electronic signatures created with the TOE. OE.Dev_Prov_Service ensures that the signatory obtains an authentic copy of the TOE, initialized and personalized as SSCD from the SSCD-provisioning 59/128 service. OE.SCD/SVD_Auth_Gen, OE.SCD_Secrecy, and OE.SCD_Unique ensure the security of the SCD in the CSP environment. OE.SCD_Secrecy ensures the confidentiality of the SCD during genetation, during and after the export to the TOE. The CSP does not use the SCD for creation of any signature and deletes the SCD irreversibly after export to the TOE. OE.SCD_Unique provides that the signatory’s SCD can pratically occur just once. OE.SCD_SVD_Corresp ensures that the SVD in the certificate of the signatory corresponds to the SCD that is implemented in the copy of the TOE of the signatory. OE.CGA_QCert ensures that the certificate allows to identify the signatory and thus to link the SVD to the signatory. OE.SVD_Auth and OE.CGA_QCert require the environment to ensure authenticity of the SVD as being exported by the TOE and used under sole control of the signatory. OT.SCD_SVD_Corresp ensures that the SVD exported by the TOE corresponds to the SCD that is implemented in the TOE. OT.SCD_Unique provides that the signatory’s SCD can practically occur just once. OE.Signatory ensures that the signatory checks that the SCD, stored in the SSCD received from an SSCD- provisioning service is in non-operational state (i.e. the SCD cannot be used before the signatory becomes into sole control over the SSCD). The TOE security feature addressed by the security objectives OT.TOE_SSCD_Auth and OT.TOE_TC_SVD_Exp supported by OE.Dev_Prov_Service enables the verification whether the device presented by the applicant is a SSCD as required by OE.CGA_SSCD_Auth and the received SVD is sent by the device holding the corresponding SCD as required by OE.CGA_TC_SVD_Imp. OT.Sigy_SigF provides that only the signatory may use the TOE for signature creation. As prerequisite OE.Signatory ensures that the signatory keeps their VAD confidential. The confidentiality of the VAD is protected during the transmission between the HI device and TOE according to OE.HID_TC_VAD_Exp (Trusted channel of HID for VAD) and OT.TOE_TC_VAD_Imp (Trusted channel of TOE for VAD). OE.DTBS_Intend, OE.DTBS_Integrity_TOE, OE.SCA_TC_DTBS_Exp, and OT.TOE_TC_DTBS_Imp ensure that the TOE creates electronic signatures only for those DTBS/R, which the signatory has decided to sign as DTBS. The robust cryptographic techniques required by OT.Sig_Secure ensure that only this SCD may create a valid electronic signature that can be successfully verified with the corresponding SVD used for signature verification. The security objective for the TOE OT.Lifecycle_Security (Lifecycle security), OT.SCD_Secrecy (Secrecy of the signature creation data), OT.EMSEC_Design (Provide physical emanations security), OT.Tamper_ID (Tamper detection) and OT.Tamper_Resistance (Tamper resistance) protect the SCD against any compromise. OT.LifeCycle_Management ensures that when the TOE is under the Personalisation Agent control, it can not be misused to sign on behalf of the legitimate Signatory. OE.LinkSCD_QualifiedCertificate and OT.SCD/SVD_Management ensure the SCA always uses the SCD it intends to, in order to create a digital signature. OE.LinkSCD_QualifiedCertificate ensures that the SCA can unambiguously sort out within the TOE file structure the SCD matching any (qualified) certificate it has chosen and intends to use. OT.SCD/SVD_Management ensures that the TOE create signature with the SCD that has been selected by the SCA. As such it ensures the signature is always created with the SCD matching the (qualified) certificate selected by the SCA, avoiding any mismatch between SCD and (qualified) certificate, that may cause the signature to be repudiated. P.LinkSCD_QualifiedCertificate (Link between a SCD and its qualified certificate) ensures that the SCA can unambiguously find within the TOE File structure the SCD matching a (qualified) certificate it has chosen to perform an electronic signature. It is addressed by OE.LinkSCD_QualifiedCertificate that ensures an unambiguous link between each (qualified) certificate and the matching SCD loaded in the TOE. 60/128 P.TOE_PublicAuthKey_Cert (Certificate for asymmetric TOE authentication keys) ensures that each private key(s) of the TOE for authentication matches the public key stored within the relevant certificate issued by an entitled entity. The authentication public key is exported thanks to OE.TOE_PublicAuthKey_Transfer. P.TOE_Construction (TOE construction) ensures that all the recommendations indicated in [AGD_PRE] are applied for the construction of the TOE in phase 6. It is addressed by OE.TOE_Construction. P.eServices (Provision of eServices) ensures that the TOE provides secure eServices functionalities. It is addressed by OT.eServices. Upkeep of assumptions by security objectives: A.CGA (Trustworthy certificate generation application) establishes the protection of the authenticity of the signatory's name and the SVD in the qualified certificate by the advanced signature of the CSP by means of the CGA. This is addressed by OE.CGA_QCert (Generation of qualified certificates), which ensures the generation of qualified certificates, and by OE.SVD_Auth (Authenticity of the SVD), which ensures the protection of the integrity of the received SVD and the verification of the correspondence between the SVD and the SCD that is implemented by the SSCD of the signatory. A.SCA (Trustworthy signature creation application) establishes the trustworthiness of the SCA with respect to generation of DTBS/R. This is addressed by OE.DTBS_Intend (Data intended to be signed) which ensures that the SCA generates the DTBS/R of the data that have been presented to the signatory as DTBS and which the signatory intends to sign in a form which is appropriate for being signed by the TOE. A.CSP (Secure SCD/SVD management by CSP) establishes several security aspects concerning handling of SCD and SVD by the CSP. That the SCD/SVD generation device can only be used by authorized users is addressed by OE.SCD/SVD_Auth_Gen (Authorized SCD/SVD generation), that the generated SCD is unique and cannot be derived by the SVD is addressed by OE.SCD_Unique (Uniqueness of the signature creation data), that SCD and SVD correspond to each other is addressed by OE.SCD_SVD_Corresp (Correspondence between SVD and SCD), and that the SCD are kept confidential, are not used for signature generation in the environment and are deleted in the environment once exported to the TOE is addressed by OE.SCD_Secrecy (SCD Secrecy). 61/128 EXTENDED COMPONENTS DEFINITION 7.1 FPT_EMS TOE Emanation The additional family FPT_EMS (TOE Emanation) of the Class FPT (Protection of the TSF) is defined here to describe the IT security functional requirements of the TOE. The TOE shall prevent attacks against the SCD and other secret data where the attack is based on external observable physical phenomena of the TOE. Examples of such attacks are evaluation of TOE’s electromagnetic radiation, simple power analysis (SPA), differential power analysis (DPA), timing attacks, radio emanation etc. This family describes the functional requirements for the limitation of intelligible emanations. The family FPT_EMS belongs to the Class FPT because it is the class for TSF protection. Other families within the Class FPT do not cover the TOE emanation. The definition of the family FPT_EMS is taken from the Protection Profile Secure Signature Creation Device [5]. Family behavior: This family defines requirements to mitigate intelligible emanations. Component leveling: FPT_EMS.1 TOE Emanation has two constituents: - FPT_EMS.1.1 Limit of Emissions requires to not emitting intelligible emissions enabling access to TSF data or user data. - FPT_EMS.1.2 Interface Emanation requires to not emitting interface emanation enabling access to TSF data or user data. Management: There are no management activities foreseen. Audit: There are no actions identified that shall be auditable if FAU_GEN (Security audit data generation) is included in a PP or ST using FPT_EMS.1. FPT_EMS.1 TOE Emanation FPT_EMS TOE Emanation 1 62/128 Hierarchical to: No other components. Dependencies: No dependencies. FPT_EMS.1.1 The TOE shall not emit [assignment: types of emissions] in excess of [assignment: specified limits] enabling access to [assignment: list of types of TSF data] and [assignment: list of types of user data]. FPT_EMS.1.2 The TSF shall ensure [assignment: type of users] are unable to use the following interface [assignment: type of connection] to gain access to [assignment: list of types of TSF data] and [assignment: list of types of user data]. 7.2 FCS_RNG Random Number Generation A physical random number generator (RNG) produces the random number by a noise source based on physical random processes. A non-physical true RNG uses a noise source based on non-physical random processes like human interaction (key strokes, mouse movement). A deterministic RNG uses a random seed to produce a pseudorandom output. A hybrid RNG combines the principles of physical and deterministic RNGs. Family behavior: This family defines quality requirements for the generation of random numbers which are intended to be used for cryptographic purposes. Component leveling: FCS_ RNG.1 Random Number Generation has two constituents: - FCS_RNG.1.1 Random number generator type - FCS_RNG.1.2 Random number quality Management: There are no management activities foreseen Audit: FCS_RNG Random Number Generation 1 63/128 There are no actions defined to be auditable FCS_RNG.1 Random Number Generation Hierarchical to: No other components. Dependencies: No dependencies. Definition FCS_RNG.1.1 The TSF shall provide a [selection: physical, non-physical true, deterministic hybrid] random number generator that implements: [assignment: list of security capabilities]. FCS_RNG.1.2 The TSF shall provide random numbers that meet [assignment: a defined quality metric]. 7.3 FIA_API Authentication proof of Identity To describe the IT security functional requirements of the TOE a sensitive family (FIA_API) of the class FIA (Identification and Authentication) is defined here. This family describes the functional requirements for the proof of the claimed identity for the authentication verification by an external entity where the other families of the class FIA address the verification of the identity of an external entity. Family behaviour: This family defines functions provided by the TOE to prove their identity and to be verified by an external entity in the TOE IT environment. Component leveling: FIA_API.1 Authentication proof of identity Management: The following actions could be considered for the management functions in FMT: Management of authentication information used to prove the claimed identity. FIA_API Authentication proof of identity 1 64/128 Audit: There are no actions defined to be auditable. FIA_API.1 Authentication Proof of Identity Hierarchical to: No other components. Dependencies: No dependencies. Definition FIA.API1.1 The TSF shall provide a [assignment: authentication mechanism] to prove the identity of the [assignment: authorized user or role] 65/128 SECURITY REQUIREMENTS 8.1 Security Functional Requirements 8.1.1 Security attributes The security attributes and the related status for the subjects and objects are: Subject or object the security attribute is associated with Security Attribute type Value of the security attribute S.User Role R.Admin R.Sigy S.User SCD/SVD Management Authorized Not authorized SCD SCD Operational Yes No SCD SCD Identifier Arbitrary value S.Admin IAS ECC Management Medium Contact Contactless HashOffCard Management Authorized Not authorized SymAuthMechanisms Management Authorized Not authorized AsymAuthMechanisms Management Authorized Not authorized S.User Key Management Key import Management Authorized Not authorized Key generation Management Key export Management 8.1.1.1 SCD/SVD Management The TOE controls the access on every object it possesses, in particular the SCD and the SVD. 66/128 In phase 6, S.Admin is the personalization Agent, and as such always has the attribute “SCD/SVD Management” set to “Authorized”. In phase 7, two access modes may be distinguished by the TOE  SCD/SVD generation (SSCD type 23)  SCD/SVD import (SSCD type 2) The access condition is granted to a user if the following conditions are met:  The User is successfully authenticated  The User was given the right to manage the SCD & SVD (import and/or generation). If these two conditions are fulfilled, the attribute “SCD/SVD management” is set to “authorized”, otherwise it is set to “not authorized”. 8.1.1.2 SCD Operational The attribute “SCD operational” is granted by the submission of the RAD by the User Signatory. The RAD may be a PIN or a Biometric template. 8.1.1.3 IAS ECC Management The TOE may be configured to allow:  communication in contact and/or contactless mode  qualified signature to be computed from a hash off card  enable/disable the authentication mechanism based on symmetric scheme  enable/disable the authentication mechanism based on asymmetric scheme The value of the related security attributes may be changed in phase 6 by the “Personalisation Agent” and in phase 7 by “TOE_Administrator”. 8.1.1.4 Key Management In phase 6, the Personalisation Agent has the attribute Key import, generation and export Management set to Authorized In phase 7, the TOE controls the access on every object it holds, in particular Keys including Diffie Hellman Domain parameters. The access condition is granted to a user if the following conditions are fulfilled:  The Subject is successfully authenticated  The Subject was given the right to import/generate/export a key When these two conditions are fulfilled, the security attribute is set to authorized, otherwise it is set to not authorized 67/128 8.1.2 SFRs drawn for PP The following SFRs are drawn from the protection profiles. They are sorted out depending on the life cycle of the TOE. 8.1.2.1 Phase 6&7 8.1.2.1.1 FCS_CKM.1/SCD/SVD_Generation Cryptographic key generation Hierarchical to: No other components. Dependencies: [FCS_CKM.2 Cryptographic key distribution, or FCS_COP.1 Cryptographic operation] FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1/SCD/SVD_Generation The TSF shall generate an SCD/SVD pair in accordance with a specified cryptographic key generation algorithm: (1) RSA key generation (2) Key pair over Elliptic curve2 and specified cryptographic key sizes: (1) 1024 bits or 1536 bits or 2048 bits (2) Any elliptic curve from 160 bits up to 521 bits with prime field p3 that meet the following: (1) [ANSIX9.31] (2) [IEEE]4 8.1.2.1.2 FCS_CKM.4 Cryptographic key destruction Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] 2 [assignment: cryptographic key generation algorithm] 3 [assignment: cryptographic key sizes] 4 [assignment: list of standards] 68/128 FCS_CKM.4.1 The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method overwriting the buffer containing the key with zero5 that meets the following: none6. Application note: This SFR applies to all keys, whether it is the SCD, the SVD or another one. The cryptographic key SCD will be destroyed on demand of the Signatory or Administrator. The destruction of the SCD is mandatory before the SCD is re-imported into the TOE. 8.1.2.1.3 FDP_ACC.1/SCD/SVD_Generation Subset access control Hierarchical to: No other components. Dependencies: FDP_ACF.1 Security attributes based access control FDP_ACC.1.1/SCD/SVD_Generation The TSF shall enforce the SCD/SVD_Generation SFP on (1) subjects: S.User (2) objects: SCD, SVD (3) operations: generation of SCD/SVD pair 8.1.2.1.4 FDP_ACF.1/SCD/SVD_Generation Security attribute based access control Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FMT_MSA.3 Static attribute initialisation FDP_ACF.1.1/SCD/SVD_Generation The TSF shall enforce the SCD/SVD_Generation SFP to objects based on the following: the user S.User is associated with the security attribute “SCD/SVD management”. FDP_ACF.1.2/SCD/SVD_Generation The TSF shall enforce the following rules to determine if an operation among controlled objects is allowed: S.User with the security attribute “SCD/SVD Management” set to “authorized” is allowed to generate SCD/SVD pair. 5 [assignment: cryptographic key destruction method] 6 [assignment: list of standards]. 69/128 Refinement: In phase 6, S.User is the “Personalisation Agent” and always has the security attribute “SCD/SVD Management” set to “authorized”. In phase 7, depending on the use case, the role allowed to generate SCD/SVD may be restricted to R.Admin, one of its sub roles, to R.Sigy or any combination of them. FDP_ACF.1.3/SCD/SVD_Generation The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4/SCD/SVD_Generation The TSF shall explicitly deny access of subjects to objects based on the following additional rules: S.User with the security attribute “SCD/SVD Management” set to “not authorized” is not allowed to generate SCD/SVD pair. Refinement: In phase 6, S.User is the «Personalisation Agent» and always has the security attribute “SCD/SVD Management” set to “authorized”. 8.1.2.1.5 FDP_ACC.1/SVD_Transfer Subset access control Hierarchical to: No other components. Dependencies: FDP_ACF.1 Security attribute based access control FDP_ACC.1.1/ SVD_Transfer The TSF shall enforce the SVD Transfer SFP on (1) subjects: S.User, (2) objects: SVD (3) operations: export. 8.1.2.1.6 FDP_ACF.1/SVD_Transfer Security attribute based access control Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FMT_MSA.3 Static attribute initialization FDP_ACF.1.1/ SVD_Transfer The TSF shall enforce the SVD Transfer SFP to objects based on the following: (1) the S.User is associated with the security attribute Role, (2) the SVD. 70/128 FDP_ACF.1.2/ SVD_Transfer The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: R.Admin or R.Sigy7 is allowed to export SVD. Refinement: In phase 6 R.Admin is the “Personalisation Agent” and always has the security attribute “SCD/SVD Management” set to “authorized”. In phase 7, depending on the use case, the role allowed to export the SVD may be restricted to R.Admin, one of its sub roles, to “R.Sigy” or any combination of them. FDP_ACF.1.3/ SVD_Transfer The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4/ SVD_Transfer The TSF shall explicitly deny access of subjects to objects based on the following additional rules: none. 8.1.2.1.7 FDP_ACC.1/SCD_import Subset access control Hierarchical to: No other components. Dependencies: FDP_ACF.1 Security attribute based access control FDP_ACC.1.1/ SCD_Import The TSF shall enforce the SCD_Import SFP on (1) subjects: S.User, (2) objects: SCD (3) operations: import of SCD. 8.1.2.1.8 FDP_ACF.1/SCD_Import Security attribute based access control Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FMT_MSA.3 Static attribute initialization FDP_ACF.1.1/ SCD_Import The TSF shall enforce the SCD_Import SFP to objects based on the following: the S.User is associated with the security attribute “SCD/SVD Management”. FDP_ACF.1.2/ SCD_Import The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: S.User with the security attribute “SCD/SVD Management” set to “authorized” is allowed to import the SCD. 7 [selection : R.Admin, R.Sigy] 71/128 Refinement: In phase 6, S.User is the “Personalisation Agent” and always has the security attribute “SCD/SVD Management” set to “authorized”. In phase 7, depending on the use case, the role allowed to import the SCD may be restricted to R.Admin, one of its sub roles, to R.Sigy or any combination of them. FDP_ACF.1.3/ SCD_Import The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4/ SCD_Import The TSF shall explicitly deny access of subjects to objects based on the following additional rules: S.User with security attribute “SCD/SVD Management” set to “not authorized” is not allowed to import the SCD. 8.1.2.1.9 FDP_RIP.1 Subset residual information protection Hierarchical to: No other components Dependencies: No dependencies FDP_RIP.1.1 The TSF shall ensure that any previous information content of a resource is made unavailable upon the de-allocation of the resource from the following objects: SCD, RAD, VAD, Keys, Session keys and related data. 8.1.2.1.10 FDP_SDI.2/Persistent Stored data integrity monitoring and action Hierarchical to: FDP_SDI.1 Stored data integrity monitoring. Dependencies: No dependencies. FDP_SDI.2.1/ Persistent The TSF shall monitor user data stored in containers controlled by the TSF for integrity error on all objects, based on the following attributes: integrity checked stored data. FDP_SDI.2.2/ Persistent Upon detection of a data integrity error, the TSF shall (1) prohibit the use of the altered data (2) inform the S.Sigy about integrity error. Application note: The following data persistently stored by the TOE has the user data attribute "integrity checked persistent stored data": 1. SCD 2. SVD 3. RAD 72/128 4. Keys including Diffie hellman parameters 8.1.2.1.11 FDP_ITC.1/SCD Import of user data without security attributes Hierarchical to: No other components Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_MSA.3 Static attribute initialization FDP_ITC.1.1/SCD The TSF shall enforce the SCD_Import SFP when importing user data, controlled under the SFP, from outside of the TOE. FDP_ITC.1.2/SCD The TSF shall ignore any security attributes associated with the SCD when imported from outside the TOE. FDP_ITC.1.3/SCD The TSF shall enforce the following rules when importing user data controlled under the SFP from outside the TOE: SCD shall be sent by an authorized CSP8. Application note: The TOE interacts with a CSP through a SCD/SVD generation application to import the SCD. Authorized CSP is able to establish a trusted channel with the TOE for SCD transfer as required by FTP_ITC.1.3/SCD. In phase 6, the authorized CSP is the «Personalisation Agent». 8.1.2.1.12 FDP_UCT.1/SCD Basic data exchange confidentiality Hierarchical to: No other components Dependencies: [FDP_ITC.1 Inter-TSF trusted channel, or FTP_TRP.1 Trusted path] [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FDP_UCT.1.1/SCD The TSF shall enforce the SCD_Import SFP to receive SCD in a manner protected from unauthorised disclosure 8.1.2.1.13 FDP_DAU.2/SVD Data Authentication with Identity of Guarantor 8 [assignment: additional importation control rules] 73/128 Hierarchical to: FDP_DAU.1 Basic Data Authentication Dependencies FIA_UID.1 Timing if identification FDP_DAU.2.1/SVD The TSF shall provide a capability to generate evidence that can be used as a guarantee of the validity of SVD FDP_DAU.2.2/SVD The TSF shall provide CGA with the ability to verify evidence of the validity of the indicated information and the identity of the user that generated the evidence. 8.1.2.1.14 FIA_UID.1 Timing of identification Hierarchical to: No other components. Dependencies: No dependencies. FIA_UID.1.1 The TSF shall allow (1) Self-test according to FPT_TST.1 (2) establishing a trusted channel between the CGA and the TOE by means of the TSF required by FTP_ITC.1/SVD (3) establishing a trusted channel between the HID of the TOE by means of TSF required by FTP_ITC.1/VAD (4) establishing a trusted channel between the CSP and the TOE by means of the TSF required by FTP_ITC.1/SCD (5) establishing a trusted channel between the CSP and the TOE by means of the TSF required by FTP_ITC.1/DTBS9. on behalf of the user to be performed before the user is identified . FIA_UID.1.2 The TSF shall require each user to be successfully identified before allowing any other TSF-mediated actions on behalf of that user. 8.1.2.1.15 FIA_UAU.1 Timing of authentication Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification. FIA_UAU.1.1 The TSF shall allow (1) Self-test according to FPT_TST.1, (2) Identification of the user by means of TSF required by FIA_UID.1. (3) establishing a trusted channel between the CGA and the TOE by means of the TSF required by FTP_ITC.1/SVD (6) establishing a trusted channel between the HID of the TOE by means of TSF required by FTP_ITC.1/VAD 9 [assignment : list of additional TSF-mediated actions] 74/128 (7) establishing a trusted channel between the CSP and the TOE by means of the TSF required by FTP_ITC.1/SCD (4) establishing a trusted channel between the CSP and the TOE by means of the TSF required by FTP_ITC.1/DTBS10. on behalf of the user to be performed before the user is authenticated. FIA_UAU.1.2 The TSF shall require each user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that user. 8.1.2.1.16 FIA_API.1 Authentication proof of Identity Hierarchical to: No other components. Dependencies: No dependencies. FIA_API.1.1 The TSF shall provide an authentication mechanism11 to prove the identity of the SSCD Application note: The authentication mechanism may be: - a device authentication (mutual authentication in the symmetric case and internal authentication in the asymmetric case) : phase 7 - GP authentication: phase 6 - Outgoing MAC: phase 6 and 7 8.1.2.1.17 FMT_SMR.1 Security roles Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification. FMT_SMR.1.1 The TSF shall maintain the roles R.Admin, R.Sigy and TOE_Administrator. FMT_SMR.1.2 The TSF shall be able to associate users with roles. 8.1.2.1.18 FMT_SMF.1 Security management functions Hierarchical to: No other components. 10 [assignment : list of additional TSF-mediated actions] 11 [assignment : authentication mechanism] 75/128 Dependencies: No dependencies. FMT_SMF.1.1 The TSF shall be capable of performing the following management functions: (1) Creation, modification, and unblocking of RAD, (2) Enabling the signature creation function, (3) Modification of the security attribute SCD/SVD management, SCD operational, (4) Change the default value of the security attribute SCD Identifier. (5) SCD/SVD Generation (6) SCD import (7) Management of the TOE (8) Key management12 Application Note: There is no default value for the SCD Identifier 8.1.2.1.19 FMT_MSA.1/Admin Management of security attributes Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MSA.1.1/ Admin The TSF shall enforce the SCD/SVD Generation SFP and the SCD Import SFP to restrict the ability to modify the security attributes SCD/SVD management to R.Admin. 8.1.2.1.20 FMT_MSA.2 Secure security attributes Hierarchical to: No other components Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_MSA.1 Management of security attributes FMT_SMR.1 Security roles FMT_MSA.2.1 The TSF shall ensure that only secure values are accepted for: 12 [assignment : list of other security management functions to be provided by the TSF] 76/128 (1) SCD/SVD Management (2) SCD operational. (3) IAS ECC Management (4) Key Management 8.1.2.1.21 FMT_MSA.3 Static attribute initialisation Hierarchical to: No other components. Dependencies: FMT_MSA.1 Management of security attributes FMT_SMR.1 Security roles FMT_MSA.3.1 The TSF shall enforce the SCD/SVD Generation SFP, SVD Transfer SFP, SCD import SFP, Signature Creation SFP, IAS ECC Administration SFP, and Key Management SFP to provide restrictive default values for security attributes that are used to enforce the SFP. FMT_MSA.3.2 The TSF shall allow the authorized identified role to specify alternative initial values to override the default values when an object or information is created. Refinement: The authorized identified roles are defined in the following table depending on the TOE lifecycle phase Security attribute Phase Authorized identified roles SCD/SVD Management 6&7 R.Admin SCD Operational 7 R.Admin IAS ECC Management 6&7 Personalisation Agent in phase 6 and TOE_Administrator in phase 7 Key Management 6&7 Personalisation Agent in phase 6 R.Sigy, CSP, SCA, HID, IFD and User_Admin in phase 7 8.1.2.1.22 FMT_MSA.4 Security attribute value inheritance Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] 77/128 FMT_MSA.4.1 The TSF shall use the following rules to set the value of security attributes: (1) If S.Admin successfully generates an SCD/SVD pair without S.Sigy being authenticated the security attribute “SCD operational” of the SCD shall be set to “no” as a single operation. (2) If S.Sigy successfully generates an SCD/SVD pair the security attribute “SCD operational” of the SCD shall be set to “yes” as a single operation. (3) If S.Admin imports SCD while S.Sigy is not currently authenticated, the security attribute “SCD operational” of the SCD shall be set to “no” after import of the SCD as a single operation (4) If S.Admin imports SCD while S.Sigy is currently authenticated, the security attribute “SCD operational” of the SCD shall be set to “yes” after import of the SCD as a single operation 8.1.2.1.23 FMT_MTD.1/Admin Management of TSF data Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MTD.1.1/Admin The TSF shall restrict the ability to create the RAD to R.Admin. 8.1.2.1.24 FPT_EMS.1 TOE Emanation Hierarchical to: No other components. Dependencies: No dependencies. FPT_EMS.1.1 The TOE shall not emit side channel emission 13in excess of limits specified by the state of the art attacks on smart card IC14 enabling access to RAD, SCD and Keys. FPT.EMS.1.2 The TSF shall ensure all users15 are unable to use the following interface external contacts emanations16 to gain access to RAD, SCD, and Keys. 13 [assignment : types of emissions] 14 [assignment: specified limits] 15 [assignment: type of users] 16 [assignment: type of connection] 78/128 8.1.2.1.25 FPT_FLS.1 Failure with preservation of secure state Hierarchical to: No other components. Dependencies: No dependencies. FPT_FLS.1.1 The TSF shall preserve a secure state when the following types of failures occur: (1) self-test according to FPT_TST fails (2) card reset or tearing (3) Security violation detected by [PLT] with FAU_ARP.1, (4) Failure detected by [PLT] with FPT_FLS.1, FPT_FLS.1/ADEL, FPT_FLS.1/ODEL, and FPT_FLS.1/SCP (5) Integrity error detected on RAD, SCD, and Keys17 8.1.2.1.26 FPT_PHP.1 Passive detection of physical attack Hierarchical to: No other components. Dependencies: No dependencies. FPT_PHP.1.1 The TSF shall provide unambiguous detection of physical tampering that might compromise the TSF. FPT_PHP.1.2 The TSF shall provide the capability to determine whether physical tampering with the TSF’s devices or TSF’s elements has occurred. 8.1.2.1.27 FPT_PHP.3 Resistance to physical attack Hierarchical to: No other components. Dependencies: No dependencies. FPT_PHP.3.1 The TSF shall resist physical manipulation and physical probing18 to the TSF19 by responding automatically such that the SFRs are always enforced. 17 [assignment : list of other types of failures in the TSF] 18 [assignment: physical tampering scenarios] 19 [assignment: list of TSF devices/elements] 79/128 8.1.2.1.28 FPT_TST.1 TSF testing Hierarchical to: No other components. Dependencies: No dependencies. FPT_TST.1.1 The TSF shall run a suite of self-tests during initial start-up, periodically during normal operation20 to demonstrate the correct operation of the TSF. FPT_TST.1.2 The TSF shall provide authorized users with the capability to verify the integrity of TSF data. FPT_TST.1.3 The TSF shall provide authorized users with the capability to verify the integrity of TSF. 8.1.2.1.29 FTP_ITC.1/SCD Inter-TSF trusted channel Hierarchical to: No other components. Dependencies: No Dependencies FTP_ITC.1.1/SCD The TSF shall provide a communication channel between itself and another trusted IT product that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. FTP_ITC.1.2/SCD The TSF shall permit another trusted IT product to initiate communication via the trusted channel FTP_ITC.1.3/SCD The TSF shall initiate communication via the trusted channel for (1) data exchange integrity according to FDP_UCT.1/SCD (2) none21 8.1.2.1.30 FTP_ITC.1/SVD Inter-TSF trusted channel Hierarchical to: No other components. Dependencies: No Dependencies 20 [selection: during initial start-up, periodically during normal operation, at the request of the authorised user, at the conditions [assignment: conditions under which self-test should occur]] 21 [assignment : list of other functions for which a trusted channel is required] 80/128 FTP_ITC.1.1/SVD The TSF shall provide a communication channel between itself and another trusted IT product CGA that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. FTP_ITC.1.2/SVD The TSF shall permit another trusted IT product to initiate communication via the trusted channel FTP_ITC.1.3/SVD The TSF or the CGA shall initiate communication via the trusted channel for (3) data Authentication with Integrity of Guarantor according to FIA_API.1 and FDP_DAU.2/SVD (4) none22 8.1.2.2 Phase 7 8.1.2.2.1 FCS_COP.1/Sign Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Sign The TSF shall perform digital signature creation in accordance with a specified cryptographic algorithm:  PKCS#1 V1.5 Block type 1 with Message Digest Info RSA CRT and hashing algorithm SHA-1 or SHA-256  ECDSA-SHA1, SHA-224, SHA-256, SHA-384, SHA-51223 and cryptographic key sizes:  RSA: 1024 bits or 1536 bits or 2048 bits  ECDSA: Any elliptic curve from 160 bits up to 521 bits with prime field p24 that meet the following:  [PKCS#1]  [ANSIX9.62]25 22 [assignment : list of other functions for which a trusted channel is required] 23 [assignment : cryptographic algorithm] 24 [assignment : cryptographic key sizes] 25 [assignment : list of standards] 81/128 8.1.2.2.2 FDP_ACC.1/Signature_Creation Subset access control Hierarchical to: No other components Dependencies: FDP_ACF.1 Security attribute based access control FDP_ACC.1.1/Signature_Creation The TSF shall enforce the Signature Creation SFP on (1) subjects: S.User, (2) objects: DTBS/R, SCD, (3) operations: signature creation. 8.1.2.2.3 FDP_ACF.1/Signature creation Security attribute based access control Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FMT_MSA.3 Static attribute initialisation FDP_ACF.1.1/ Signature_Creation The TSF shall enforce the Signature Creation SFP to objects based on the following: (1) the user S.User is associated with the security attribute “Role” and (2) the SCD with the security attribute “SCD Operational”. FDP_ACF.1.2/ Signature_Creation The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: R.Sigy is allowed to create electronic signatures for DTBS/R with SCD which security attribute “SCD operational” is set to “yes”. FDP_ACF.1.3/ Signature_Creation The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4/ Signature_Creation The TSF shall explicitly deny access of subjects to objects based on the following additional rules: S.User is not allowed to create electronic signatures for DTBS/R with SCD which security attribute “SCD operational” is set to “no”. 8.1.2.2.4 FDP_SDI.2/DTBS Stored data integrity monitoring and action Hierarchical to: FDP_SDI.1 Stored data integrity monitoring. Dependencies: No dependencies. 82/128 FDP_SDI.2.1/DTBS The TSF shall monitor user data stored in containers controlled by the TSF for integrity error on all objects, based on the following attributes: integrity checked stored DTBS. FDP_SDI.2.2/DTBS Upon detection of a data integrity error, the TSF shall (1) prohibit the use of the altered data (2) inform the S.Sigy about integrity error. Application note: The DTBS/R temporarily stored by the TOE has the user data attribute "integrity checked stored data". 8.1.2.2.5 FDP_UIT.1/DTBS Data Exchange Integrity Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] [FTP_ITC.1 Inter-TSF trusted channel, or FTP_TRP.1 Trusted path] FDP_UIT.1.1/DTBS The TSF shall enforce the signature creation SFP to receive user data in a manner protected from modification and insertion errors. FDP_UIT.1.2/DTBS The TSF shall be able to determine on receipt of user data, whether modification or insertion has occured 8.1.2.2.6 FIA_AFL.1 / RAD Authentication failure handling Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_AFL.1.1/RAD The TSF shall detect when an administrator configurable positive integer within 1 and 1526 unsuccessful authentication attempts occur related to consecutive failed authentication attempts. FIA_AFL .1.2/RAD When the defined number of unsuccessful authentication attempts has been met, the TSF shall block RAD. Application note: These SFRs apply to R.Sigy and R.Admin if the latter uses a RAD to authenticate itself. 26 [selection: [assignment: positive integer number], an administrator configurable positive integer within [assignment: range of acceptable values]] 83/128 8.1.2.2.7 FMT_MOF.1 Management of security functions behavior Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions. FMT_MOF.1.1 The TSF shall restrict the ability to enable the functions signature creation function to R.Sigy. 8.1.2.2.8 FMT_MSA.1/Signatory Management of security attributes Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MSA.1.1/Signatory The TSF shall enforce the Signature Creation SFP to restrict the ability to modify the security attributes SCD operational to R.Sigy. 8.1.2.2.9 FMT_MTD.1/Signatory Management of TSF data Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MTD.1.1/Signatory The TSF shall restrict the ability to modify the RAD to R.Sigy. Refinement: This requirement applies only if the RAD belonging to S.Sigy. 8.1.2.2.10 FTP_ITC.1/VAD Inter-TSF trusted channel – TC Human Interface Device Hierarchical to: No other components. Dependencies: No Dependencies 84/128 FTP_ITC.1.1/VAD The TSF shall provide a communication channel between itself and another trusted IT product HID that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. FTP_ITC.1.2/VAD The TSF shall permit the remote trusted IT product to initiate communication via the trusted channel FTP_ITC.1.3/VAD The TSF or the HID shall initiate communication via the trusted channel for (5) User authentication according to FIA_UAU.1 (6) none27 8.1.2.2.11 FTP_ITC.1/DTBS Inter-TSF trusted channel – Signature Creation Application Hierarchical to: No other components. Dependencies: No Dependencies FTP_ITC.1.1/DTBS The TSF shall provide a communication channel between itself and another trusted IT product SCA that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from modification or disclosure. FTP_ITC.1.2/DTBS The TSF shall permit the remote trusted IT product to initiate communication via the trusted channel FTP_ITC.1.3/DTBS The TSF or the SCA shall initiate communication via the trusted channel for (7) Signature creation (8) none28 8.1.3 Additional SFRs 8.1.3.1 Phase 6 8.1.3.1.1 FCS_COP.1/GP secret data protection Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or 27 [assignment : list of other functions for which a trusted channel is required] 28 [assignment : list of other functions for which a trusted channel is required] 85/128 FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/GP secret data protection The TSF shall perform GP secret data encryption29 in accordance with a specified cryptographic algorithm:  SCP02 using TDES  SCP03 using AES  Proprietary SCP03 using AES30 and cryptographic key sizes:  128 bits  128, 192, and 256 bits  128,192, and 256 bits31 that meet the following:  [GP2.2.1]  [SCP03]  [PLT]32 Application Note 1: The type of algorithm used by the TOE depends on the configuration set during the javacard open platform personalisation (For more details see [AGD_PRE_PLT]). Application Note 2: The applet provides this service via the platform, it doesn’t own and cannot access the keys used to protect secret data. Their import/generation and destruction are managed by the platform. 8.1.3.1.2 FMT_MTD.1/TOE Serial Number Management of TSF data Hierarchical to: No other components. Dependencies: No dependencies 29 [assignment : list of cryptographic operations] 30 [assignment : cryptographic algorithm] 31 [assignment : cryptographic key sizes] 32 [assignment : list of standards] 86/128 FMT_MTD.1.1/TOE Serial Number The TSF shall restrict the ability to set33 the serial number of the TOE34 to Personalisation_Agent35 8.1.3.1.3 FMT_MTD.1/TOE state Management of TSF data Hierarchical to: No other components. Dependencies: No dependencies FMT_MTD.1.1/TOE state The TSF shall restrict the ability to switch36 the TOE from phase 6 to phase 737 to Personalisation_Agent38 8.1.3.2 Phase 7 8.1.3.2.1 FCS_CKM.1/Session keys Cryptographic key generation Hierarchical to: No other components. Dependencies: [FCS_CKM.2 Cryptographic key distribution, or FCS_COP.1 Cryptographic operation] FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1/Session keys The TSF shall generate session keys in accordance with a specified cryptographic key generation algorithm: Key derivation function39 and specified cryptographic key sizes: (1) DES keys of 128 bits (2) Two AES keys of 128, 192, and 256 bits (3) Three AES keys of 128, 192, and 256 bits40 33 [selection : change_default, query, modify, delete, clear, [assignment : other operations]] 34 [assignment : list of TSF data] 35 [assignment : the authorized identified roles] 36 [selection : change_default, query, modify, delete, clear, [assignment : other operations]] 37 [assignment : list of TSF data] 38 [assignment : the authorized identified roles] 39 [assignment: cryptographic key generation algorithm] 40 [assignment: cryptographic key sizes] 87/128 that meet the following: [14890]41 8.1.3.2.2 FCS_CKM.4/Session keys Cryptographic key destruction Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4.1/Session keys The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method overwriting the buffer containing the key with zero42 that meets the following: none43. 8.1.3.2.3 FCS_COP.1/DH Computation Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/DH Computation The TSF shall perform Key Agreement44 in accordance with a specified cryptographic algorithm: Diffie Hellmann45 and cryptographic key sizes: 1024 bits, or 1536 bits, or 2048 bits46 that meet the following: [PKCS#3]47 41 [assignment: list of standards] 42 [assignment: cryptographic key destruction method] 43 [assignment: list of standards]. 44 [assignment : list of cryptographic operations] 45 [assignment : cryptographic algorithm] 46 [assignment : cryptographic key sizes] 47 [assignment : list of standards] 88/128 8.1.3.2.4 FCS_COP.1/SM in confidentiality Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/SM in confidentiality The TSF shall perform Secure Messaging in confidentiality48 in accordance with a specified cryptographic algorithm: (1) Encryption with TDES EDE in CBC mode (2) Encryption with AES in CBC mode49 and cryptographic key sizes: (1) 128 bits (2) 128 bits, 192 bits and 256 bits50 that meet the following: [11568-2]51 Application Note: This algorithm is used during secure Messaging to ensure confidentiality of incoming and outgoing data. 8.1.3.2.5 FCS_COP.1/SM in integrity Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/SM in integrity The TSF shall perform Secure Messaging in integrity and authenticity52 in accordance with a specified cryptographic algorithm: (1) Retail MAC: MAC algorithm 3 with padding method 2 and DES bloc Cipher 48 [assignment : list of cryptographic operations] 49 [assignment : cryptographic algorithm] 50 [assignment : cryptographic key sizes] 51 [assignment : list of standards] 52 [assignment : list of cryptographic operations] 89/128 (2) EMAC: MAC algorithm 2 with padding method 2 and AES bloc Cipher with a length of eight bytes (3) CMAC: CMAC with pre padding method 2 and AES bloc Cipher with a length of eight bytes 53 and cryptographic key sizes: (1) 128 bits (2) 128 bits, 192 bits and 256 bits (3) 128 bits, 192 bits and 256 bits54 that meet the following: (1) [9797-1] (2) [9797-1] (3) [SP800-38B]55 Application Note: This algorithm is used during secure Messaging to ensure integrity and authenticity of incoming and outgoing data. 8.1.3.2.6 FCS_COP.1/C/S Auth Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/C/S Auth The TSF shall perform Client/Server Authentication56 in accordance with a specified cryptographic algorithm: raw ECDSA57 and cryptographic key sizes: Any elliptic curve from 160 bits up to 521 bits with prime field p58 that meet the following: [ANSIX9.62]59 8.1.3.2.7 FCS_COP.1/Enc key decipherment Cryptographic operation 53 [assignment : cryptographic algorithm] 54 [assignment : cryptographic key sizes] 55 [assignment : list of standards] 56 [assignment : list of cryptographic operations] 57 [assignment : cryptographic algorithm] 58 [assignment : cryptographic key sizes] 59 [assignment : list of standards] 90/128 Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Enc key decipherment The TSF shall perform Encryption key decipherment60 in accordance with a specified cryptographic algorithm: Diffie Hellman on an Elliptic curve61 and cryptographic key sizes: Any elliptic curve from 160 bits up to 521 bits with prime field p62 that meet the following: [TR03111]63 8.1.3.2.8 FCS_COP.1/Sym role Auth Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Sym role Auth The TSF shall perform Symmetric role Authentication64 in accordance with a specified cryptographic algorithm: (1) Encryption using Triple DES EDE in mode CBC, Signature using Retail MAC (2) Encryption using AES in mode CBC, Signature using EMAC (3) Encryption using AES in mode CBC, Signature using CMAC (4) Encryption using Triple DES EDE in CBC mode 65 and cryptographic key sizes: (5) 128 bits (6) 128, 192, and 256 bits (7) 128, 192, and 256 bits (8) 128 bits66 60 [assignment : list of cryptographic operations] 61 [assignment : cryptographic algorithm] 62 [assignment : cryptographic key sizes] 63 [assignment : list of standards] 64 [assignment : list of cryptographic operations] 65 [assignment : cryptographic algorithm] 66 [assignment : cryptographic key sizes] 91/128 that meet the following: (1) [IASECC] (2) [14890] (3) [14890] (4) [Minidriver]67 8.1.3.2.9 FCS_COP.1/Sym Device Auth Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Sym Device Auth The TSF shall perform Symmetric Device Authentication68 in accordance with a specified cryptographic algorithm: (1) Encryption using Triple DES EDE in mode CBC, Signature using Retail MAC (2) Encryption using AES in mode CBC, Signature using EMAC (3) Encryption using AES in mode CBC, Signature using CMAC69 and cryptographic key sizes: (1) 128 bits (2) 128, 192, and 256 bits (3) 128, 192, and 256 bits70 that meet the following: (1) [IASECC] (2) [14890] (3) [14890]71 8.1.3.2.10 FCS_COP.1/Certificate verification Cryptographic operation Hierarchical to: No other components. 67 [assignment : list of standards] 68 [assignment : list of cryptographic operations] 69 [assignment : cryptographic algorithm] 70 [assignment : cryptographic key sizes] 71 [assignment : list of standards] 92/128 Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Certificate verification The TSF shall perform Certificate verification72 in accordance with a specified cryptographic algorithm: RSA with ISO/IEC 9796-2 padding with partial recovery and with SHA-1 or SHA-25673 and cryptographic key sizes: 1024, 1536, or 2048 bits74 that meet the following: [IASECC]75 8.1.3.2.11 FCS_COP.1/Asym Role Auth Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Asym Role Auth The TSF shall perform Asymmetric Role Authentication76 in accordance with a specified cryptographic algorithm: RSA with ISO/IEC 9796-2 padding with partial recovery and with SHA-1 or SHA-25677 and cryptographic key sizes: 1024, 1536, or 2048 bits78 that meet the following: [IASECC]79 8.1.3.2.12 FCS_COP.1/Asym Internal DAPP Auth Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or 72 [assignment : list of cryptographic operations] 73 [assignment : cryptographic algorithm] 74 [assignment : cryptographic key sizes] 75 [assignment : list of standards] 76 [assignment : list of cryptographic operations] 77 [assignment : cryptographic algorithm] 78 [assignment : cryptographic key sizes] 79 [assignment : list of standards] 93/128 FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Asym Internal DAPP Auth The TSF shall perform Asymmetric Internal DAPP Authentication80 in accordance with a specified cryptographic algorithm: RSA with ISO/IEC 9796-2 padding with partial recovery and with SHA-1 or SHA- 25681 and cryptographic key sizes: 1024, 1536, or 2048 bits82 that meet the following: [IASECC]83 8.1.3.2.13 FCS_COP.1/Asym External DAPP Auth Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/Asym External DAPP Auth The TSF shall perform Asymmetric External DAPP Authentication84 in accordance with a specified cryptographic algorithm: RSA with ISO/IEC 9796-2 padding with partial recovery and with SHA-1 or SHA- 25685 and cryptographic key sizes: 1024, 1536, or 2048 bits86 that meet the following: [IASECC]87 8.1.3.2.14 FMT_MTD.1/SCD and SCD ID Management of TSF data Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MTD.1.1/SCD and SCD_ID 80 [assignment : list of cryptographic operations] 81 [assignment : cryptographic algorithm] 82 [assignment : cryptographic key sizes] 83 [assignment : list of standards] 84 [assignment : list of cryptographic operations] 85 [assignment : cryptographic algorithm] 86 [assignment : cryptographic key sizes] 87 [assignment : list of standards] 94/128 The TSF shall restrict the ability to select88 the SCD using a SCD Identifier89 to S.User90. Application note: At creation, the SCD is given a SCD identifier that will be permanently associated to it and used by the TOE to select it. 8.1.3.2.15 FMT_MTD.1/Unblock Management of TSF data Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MTD.1.1/Unblock The TSF shall restrict the ability to unblock91 the RAD92 to R.Admin93. Application note: This SFR apply to any RAD (belonging to R.Sigy or R.Admin). 8.1.3.3 Phase 6 & 7 8.1.3.3.1 FCS_CKM.1/Keys Cryptographic key generation Hierarchical to: No other components. Dependencies: [FCS_CKM.2 Cryptographic key distribution, or FCS_COP.1 Cryptographic operation] FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1/Keys The TSF shall generate Keys in accordance with a specified cryptographic key generation algorithm: (3) RSA key generation 88 [selection: change_default, query, modify, delete, clear, [assignment: other operations]] 89 [assignment: list of TSF data] 90 [assignment: The authorized identified roles] 91 [selection: change_default, query, modify, delete, clear, [assignment: other operations]] 92 [assignment: list of TSF data] 93 [assignment: The authorized identified roles] 95/128 (4) Key pair over Elliptic curve94 and specified cryptographic key sizes: (3) 1024 bits or 1536 bits or 2048 bits (4) Any elliptic curve from 160 bits up to 521 bits with prime field p95 that meet the following: (3) [ANSIX9.31] (4) [IEEE]96 8.1.3.3.2 FCS_COP.1/data hashing Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/data hashing The TSF shall perform data hashing97 in accordance with a specified cryptographic algorithm: SHA-1, partial SHA- 1, SHA-224, SHA-256, partial SHA-256, SHA-384 and SHA-51298 and cryptographic key sizes: none99 that meet the following: [FIPS 180-3]100 8.1.3.3.3 FCS_COP.1/GP Auth Cryptographic operation Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction 94 [assignment: cryptographic key generation algorithm] 95 [assignment: cryptographic key sizes] 96 [assignment: list of standards] 97 [assignment : list of cryptographic operations] 98 [assignment : cryptographic algorithm] 99 [assignment : cryptographic key sizes] 100 [assignment : list of standards] 96/128 FCS_COP.1.1/GP Auth The TSF shall perform Mutual Authentication101 in accordance with a specified cryptographic algorithm: (1) SCP02 using TDES (2) SCP03 using AES (3) Proprietary SCP03 using AES102 and cryptographic key sizes: (1) 128 bits (2) 128, 192, and 256 bits (3) 128,192, and 256 bits103 that meet the following: (1) [GP2.2.1] (2) [SCP03] (3) [PLT]104 Application Note 1: The type of algorithm used by the TOE depends on the configuration set during the javacard open platform personalization (For more details see [AGD_PRE_PLT]). Application Note 2: The applet provides this service via the platform, it doesn’t own and cannot access the keys used to process the authentication. Their import/generation and destruction are managed by the platform. 8.1.3.3.4 FCS_RNG.1 Random Number Generation Hierarchical to: No other components. Dependencies: No dependencies FCS_RNG.1.1 The TSF shall provide a hybrid105 random number generator that implements none106. 101 [assignment : list of cryptographic operations] 102 [assignment : cryptographic algorithm] 103 [assignment : cryptographic key sizes] 104 [assignment : list of standards] 105 [selection : physical, non physical true, deterministic hybrid] 106 [assignment : list of security capabilities] 97/128 FCS_RNG.1.2 The TSF shall provide random numbers that meet [RGS_B1]107. 8.1.3.3.5 FDP_ACC.1/IASECC Administration Subset access control Hierarchical to: No other components Dependencies: FDP_ACF.1 Security attribute based access control FDP_ACC.1.1/IAS ECC Administration The TSF shall enforce the IAS ECC Administration SFP108 on (1) Subjects: TOE_Administrator (in phase 7), Personalisation Agent (Phase 6) (2) objects: internal objects described in IASECC management (3) operations: IAS ECC Management109. 8.1.3.3.6 FDP_ACC.1/key management Subset access control Hierarchical to: No other components Dependencies: FDP_ACF.1 Security attribute based access control FDP_ACC.1.1/key management The TSF shall enforce the key management SFP110 on (4) Subjects: S.User (5) objects:keys including Diffie Hellman Domain parameters (6) operations: o Import of keys and Diffie Hellman Domain parameters o Generation of asymmetric key pair o Export of public keys and Diffie Hellman Domain parameters111. 107 [assignment : a defined quality metric] 108 [assignment : access control SFP] 109 [assignment : list of subjects, objects and operations among subjects and objects covered by the SFP] 110 [assignment : access control SFP] 111 [assignment : list of subjects, objects and operations among subjects and objects covered by the SFP] 98/128 8.1.3.3.7 FDP_ACF.1/ IASECC Administration Security attribute based access control Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FDP_ACF.1.1/ IASECC Administration The TSF shall enforce the IASECC Administration SFP112 to objects based on the following: S.Admin is associated with the security attribute “IAS ECC Management” 113. FDP_ACF.1.2/ IASECC Administration The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: (1) In phase 6, subject with the security attribute “role” set to “Personalization Agent” is allowed to modify the IAS ECC Management attributes (2) In phase 7, subject with the security attribute “role” set to “TOE_Administrator” is allowed to modify the IAS ECC Management attributes114. FDP_ACF.1.3/ IASECC Administration The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none115. FDP_ACF.1.4/ IASECC Administration The TSF shall explicitly deny access of subjects to objects based on the following additional rules: (1) In phase 6, subject without the security attribute “role” set to “Personalization Agent” is allowed to modify the IAS ECC Management attributes (2) In phase 7, subject without the security attribute “role” set to “TOE_Administrator” is allowed to modify the IAS ECC Manageemnt attributes116. 8.1.3.3.8 FDP_ACF.1/key management Security attribute based access control Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control 112 [assignment : access control SFP] 113 [assignment : list of subjects and objects controlled under the indicated SFP, and for each, the SFP-relevant security attributes, or named groups of SFP-relevant security attributes] 114 [assignment : rules governing access among controlled subjects and controlled objects using controlled operationson controlled objects] 115 [assignment : rules, based on security attributes, that explicitly authorise access of subjects to objects] 116 [assignment : rules, based on security attributes, that explicitly deny access of subjects to objects] 99/128 FDP_ACF.1.1/ key management The TSF shall enforce the key management SFP117 to objects based on the following: S.User is associated with the security attribute “Key management”118. FDP_ACF.1.2/ key management The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: (1) In phase 7, the user with the security attribute role set to S.Sigy, User_Admin, CSP, SCA, HID, IFD and with the security attribute "Key import Management" set to "authorised" is allowed to import key and Diffie Hellman Domain parameters (2) In phase 6, the user with the security attribute "role" set to “Personalisation Agent” is allowed to import keys and Diffie Hellman Domain parameters (3) In phase 7, the user with the security attribute role set to S.Sigy, User_Admin, CSP, SCA, HID, IFD and with the security attribute "Key generation Management" set to "authorised" is allowed to generate a key pair (4) In phase 6, the user with the security attribute role set to Personalisation Agent is allowed to generate a key pair (5) In phase 7, the user with the security attribute role set to S.Sigy, User_Admin, CSP, SCA, HID, IFD and with the security attribute "Key export Management" set to "authorised" is allowed to export a public key and Diffie Hellman Domain parameters (6) In phase 6, the user with the security attribute "role" set to “Personalisation Agent” is allowed to export a public key and Diffie Hellman Domain parameters (7) In phase 7, if the import, export or generation operation is set to Never, any user will not be allowed to perform the operation (8) In phase 7, if the export operation is set to Always, any user will be allowed to perform the operation119. Application note: In phase 6, the entity with the role “Personalisation Agent” always has the security attribute “Key export Management, “Key import Management”, and “Key generation Management” set to “authorized”. In phase 7, depending on the use case, the “role” allowed to import, generate or export the keys may be restricted to R.Sigy, User_Admin, CSP, SCA, HID, IFD, or any combination of them. FDP_ACF.1.3/ key management The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none120. 117 [assignment : access control SFP] 118 [assignment : list of subjects and objects controlled under the indicated SFP, and for each, the SFP-relevant security attributes, or named groups of SFP-relevant security attributes] 119 [assignment : rules governing access among controlled subjects and controlled objects using controlled operations on controlled objects] 120 [assignment : rules, based on security attributes, that explicitly authorise access of subjects to objects] 100/128 FDP_ACF.1.4/ key management The TSF shall explicitly deny access of subjects to objects based on the following additional rules: none121. 8.1.3.3.9 FDP_ETC.1/keys Export to Outside TSF control Hierarchical to: No other components Dependencies: [FDP_ACC.1 subset access control, or FDP_IFC.1 Subset information flow control] FDP_ETC.1.1/keys The TSF shall enforce the key management SFP122 when exporting user data, controlled under the SFP(s), outside of the TOE. FDP_ETC.1.2/keys the TSF shall export the user data without the user data’s associated security attributes. 8.1.3.3.10 FDP_ITC.1/Keys Import of user data without security attributes Hierarchical to: No other components Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_MSA.3 Static attribute initialization FDP_ITC.1.1/Keys The TSF shall enforce the key management SFP123 when importing user data, controlled under the SFP, from outside of the TOE. FDP_ITC.1.2/Keys The TSF shall ignore any security attributes associated with the user data when imported from outside the TOE. FDP_ITC.1.3/Keys The TSF shall enforce the following rules when importing user data controlled under the SFP from outside the TOE: Keys shall be sent by the User with the “role” set to S.Sigy, User_Admin, Personalisation Agent, CSP, SCA, HID, IFD124. 121 [assignment : rules, based on security attributes, that explicitly deny access of subjects to objects] 122 [assignment : access control SFP] 123 [assignment : access control SFP] 124 [assignement : ] 101/128 Application note: In phase 7, depending on the use case, the “role” allowed to import, generate or export the keys may be restricted to R.Sigy, User_Admin, CSP, SCA, HID, IFD or any combination of them. 8.1.3.3.11 FIA_AFL.1/Auth keys Authentication failure handling Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_AFL.1.1/Auth keys The TSF shall detect when [selection: [assignment :positive integer number], an administrator configurable positive integer within 1 and 15] unsuccessful authentication attempts occur related to consecutive failed authentication attempts. FIA_AFL .1.2/Auth keys When the defined number of unsuccessful authentication attempts has been met, the TSF shall [assignment: List of actions] Refinements: Type of entity Entity Selection for FIA_AFL.1.1 list of actions User “Personalisation Agent” Positive integer number ‘1’ Time of next authentication increases User “TOE_Administrator” Positive integer number ‘1’ Time of next authentication increases User “User_Admin” (when using symmetric role authentication) Administrator configurable positive integer ‘N’ 0  N  15 If N= ‘0’, no actions are taken. If N != ‘0’, the key is blocked User “User_Admin” (when using asymmetric role authentication) Positive integer number ‘1’ The key is deallocated with respect to FDP_RIP.1.1 User “CSP, SCA, HID, IFD” (when using symmetric device authentication) Administrator configurable positive integer ‘N’ 0  N  15 If N= ‘0’, no actions are taken. If N != ‘0’, the key is blocked 102/128 User “CSP, SCA, HID, IFD” (when using asymmetric device authentication) Positive integer number ‘1’ The key is deallocated with respect to FDP_RIP.1.1 8.1.3.3.12 FMT_MSA.1/ key management Management of security attributes Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MSA.1.1/ key management The TSF shall enforce the key management SFP125 to restrict the ability to modify126 the security attributes Key management127 to: (1) S.Sigy (2) User_Admin (3) Personalisation Agent (4) CSP (5) SCA (6) HID (7) IFD128 8.1.3.3.13 FMT_MSA.1/ TOE management Management of security attributes Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_SMR.1 Security roles 125 [assignment : access control SFP] 126 [selection: change_default, query, modidy, delete, [assignment: other operations]] 127 [assignment : list of security attributes] 128 [assignment : the authorized identified roles] 103/128 FMT_SMF.1 Specification of Management Functions FMT_MSA.1.1/ TOE management The TSF shall enforce the IASECC Administration SFP129 to restrict the ability to modify130 the security attributes IASECC Management131 to: (1) TOE_Administrator, or (2) Personalisation Agent132 8.2 Security Assurance Requirements 129 [assignment : access control SFP] 130 [selection: change_default, query, modidy, delete, [assignment: other operations]] 131 [assignment : list of security attributes] 132 [assignment : the authorized identified roles] Assurance class Assurance components ADV: Development ADV_ARC.1: Security architecture description ADV_FSP.5: Complete semi-formal functional specification with additional error information ADV_IMP.1: Implementation representation of the TSF ADV_INT.2: well-structured internals ADV_TDS.4: Semiformal modular design AGD: Guidance documents AGD_OPE.1: Operational user guidance AGD_PRE.1: Preparative procedures ALC: Life Cycle Support ALC_CMC.4: Production support, acceptance procedures and automation ALC_CMS.5: Development tools CM coverage ALC_DEL.1: Delivery procedures ALC_DVS.2: Identification of security measures (augmented) ALC_LCD.1: Developer defined life cycle model ALC_TAT.2: Compliance with implementation standards ASE: Security Target Evaluation ASE_CCL.1: Conformance Claims ASE_ECD.1: Extended components definition ASE_INT.1: ST introduction 104/128 Table 1- EAL5 + 8.2.1 AVA_VAN.5 augmentation The TOE is intended to function in a variety of signature creation systems for sualified electronic signatures. Due to the nature of its intended applications, i.e. the TOE may be issued to users and may not be directly under the control of trained and dedicated administrators. Insecure states shall be easy to detect and the TOE shall be shown to be highly resistant to penetration attacks to meet the security objectives OT.SCD_Secrecy, OT.Sigy_SigF, OT.Sig_Secure and OT.Keys_Secrecy. This assurance requirement is achieved by the AVA_VAN.5 component. Independent vulnerability analysis is based on highly detailed technical information. The attacker is assumed to be thoroughly familiar with the specific implementation of the TOE. The attacker is presumed to have a high level of technical sophistication. 8.2.2 ALC_DVS.2 augmentation In order to protect the TOE on development Phase, the component ALC_DVS.2 was added. This latter requires security documentation justifying that the security measures provide the necessary level of protection to maintain the confidentiality and integrity of the TOE. ASE.OBJ.2: Security Objectives ASE.REQ.2: Derived security requirements ASE.SPD.1: Security problem definition ASE_TSS.1: TOE summary specification ATE: Tests ATE_COV.2: Analysis of Coverage ATE_DPT.3: Testing modular design ATE_FUN.1: Functional Testing ATE_IND.2: Independent testing - sample AVA: Vulnerability assessment AVA_VAN.5: Methodical vulnerability analysis (augmented) 105/128 8.3 Security Requirements Rationale 8.3.1 Security requirement coverage TOE security objectives Functional Requirements OT.lifecycle_Security OT.SCD/SVD_Auth_Gen OT.SCD_Unique OT.SCD_SVD_Corresp OT.SCD_Auth_Imp OT.SCD_Secrecy OT.Sig_Secure OT.Sigy_SigF OT.DTBS_Integrity_TOE OT.EMSEC_Design OT.Tamper_ID OT.Tamper_Resistance OT.TOE_SSCD_Auth OT.TOE_TC_SVD_Exp OT.TOE_TC_VAD_Imp OT.TOE_TC_DTBS_Imp OT.Authentication_Secure OT.SCD/SVD_Management OT.Key_Lifecycle_Security OT.Keys_Secrecy OT.TOE_AuthKey_Unique OT.Lifecycle_Management OT.eServices FCS_CKM.1/SCD/SVD_Generation X X X X FCS_CKM.1/Keys X X X FCS_CKM.1/Session_keys X FCS_CKM.4 X X X X FCS_CKM.4/Session keys X FCS_COP.1/Sign X X FCS_COP.1/GP secret data protection X X FCS_COP.1/DH computation X X X FCS_COP.1/SM in confidentiality X FCS_COP.1/SM in integrity X FCS_COP.1/C/S Auth X X FCS_COP.1/Enc key decipherment X X FCS_COP.1/Sym role auth X X X FCS_COP.1/Sym Device auth X X X FCS_COP.1/Certificate verification X X X FCS_COP.1/Asym role auth X X X FCS_COP.1/Asym internal DAPP auth X X X FCS_COP.1/Asym external DAPPauth X X X FCS_COP.1/data hashing X FCS_COP.1/GP Auth X X X 106/128 FCS_RNG.1 X X X X FDP_ACC.1/SCD/SVD_Generation X X X FDP_ACC.1/SCD_import X X X FDP_ACC.1/SVD_Transfer X X X FDP_ACC.1/Signature_creation X X X FDP_ACC.1/IASECC Administration X X FDP_ACC.1/key management X X X FDP_ACF.1/SCD/SVD_Generation X X X FDP_ACF.1/SVD_Transfer X X X FDP_ACF.1/SCD_import X X X FDP_ACF.1/Signature_creation X X X FDP_ACF.1/IASECC Administration X X FDP_ACF.1/key management X X X FDP_RIP.1 X X X X FDP_SDI.2/Persistent X X X X X FDP_SDI.2/DTBS X X FDP_ITC.1/SCD X FDP_UCT.1/SCD X X FDP_DAU.2/SVD X FDP_UIT.1/DTBS X FDP_ETC.1/keys X X FDP_ITC.1/keys X X FIA_AFL.1/RAD X X X FIA_AFL.1/Auth keys X X X X FIA_UAU.1 X X X X X X X FIA_UID.1 X X X X X X FIA_API.1 X X FMT_MOF.1 X X X FMT_MSA.1/Admin X X X FMT_MSA.1/Signatory X X FMT_MSA.1/key management X X FMT_MSA.1/TOE management X X FMT_MSA.2 X X X X X X FMT_MSA.3 X X X X X X FMT_MSA.4 X X X X X FMT_MTD.1/Admin X X X 107/128 FMT_MTD.1/Signatory X X X FMT_MTD.1/TOE serial number X FMT_MTD.1/TOE state X FMT_MTD.1/SCD and SCD ID X FMT_MTD.1/Unblock X X FPT_EMS.1 X X X FMT_SMR.1 X X X X X X FMT_SMF.1 X X X X X X X FPT_FLS.1 X X FPT_PHP.1 X FPT_PHP.3 X X X FPT_TST.1 X X X X X X FTP_ITC.1/SCD X X FTP_ITC.1/SVD X FTP_ITC/VAD X FTP_ITC/DTBS X 108/128 8.3.2 TOE security requirements sufficiency OT.Lifecycle_Security (Lifecycle security) is provided by the SFR as follows. The SCD import is controlled by TSF according to FDP_ACC.1/SCD_Import, FDP_ACF.1/SCD_Import and FDP_ITC.1/SCD. The confidentiality of the SCD is protected during import according to FDP_UCT.1/SCD in the trusted channel FTP_ITC.1/SCD. Secure SCD/SVD generation is ensured by FCS_CKM.1/SCD/SVD_Generation. The SCD/SVD generation is controlled by TSF according to FDP_ACC.1/SCD/SVD_Generation and FDP_ACF.1/SCD/SVD_Generation. The SVD transfer for certificate generation is controlled by TSF according to FDP_ACC.1/SVD_Transfer and FDP_ACF.1/SVD_Transfer. The secure SCD usage is ensured cryptographically according to FCS_COP.1/Sign.The SCD usage is controlled by access control FDP_ACC.1/Signature_Creation, FDP_ACF.1/Signature_Creation which is based on the security attribute secure TSF management according to FMT_MOF.1, FMT_MSA.1/Admin, FMT_MSA.1/Signatory, FMT_MSA.2, FMT_MSA.3, FMT_MSA.4, FMT_MTD.1/Admin, FMT_MTD.1/Signatory, FMT_SMF.1 and FMT_SMR.1. The test functions FPT_TST.1 provides failure detection throughout the lifecycle. The SFR FCS_CKM.4, ensures a secure SCD desctruction. OT.SCD/SVD_Auth_Gen (Authorized SCD/SVD generation) addresses that generation of a SCD/SVD pair requires proper user authentication. The TSF specified by FIA_UID.1 and FIA_UAU.1 provide user identification and user authentication prior to enabling access to authorized functions. The SFR FDP_ACC.1/SCD/SVD_Generation and FDP_ACF.1/SCD/SVD_Generation provide access control for the SCD/SVD generation. The security attributes of the authenticated user are provided by FMT_MSA.1/Admin, FMT_MSA.2, and FMT_MSA.3 for static attribute initialisation. The SFR FMT_MSA.4 defines rules for inheritance of the security attribute “SCD operational” of the SCD. OT.SCD_Unique (Uniqueness of the signature creation data) implements the requirement of practically unique SCD as laid down in Annex III, paragraph 1(a), which is provided by the cryptographic algorithms specified by FCS_CKM.1/SCD/SVD_Generation OT.SCD_SVD_Corresp (Correspondence between SVD and SCD) addresses that the SVD corresponds to the SCD implemented by the TOE. This is provided by the algorithms specified by FCS_CKM.1/SCD/SVD_Generation to generate corresponding SVD/SCD pairs. The security functions specified by FDP_SDI.2/Persistent ensure that the keys are not modified, so to retain the correspondence. Moreover, the SCD Identifier allows the environment to identify the SCD and to link it with the appropriate SVD. The management functions identified by FMT_SMF.1 and by FMT_MSA.4 allow R.Admin to modify the default value of the security attribute SCD Identifier. OT.SCD_Auth_Imp (Authorized SCD import) is provided by the security functions specified by the following SFR. FIA_UID.1 and FIA.UAU.1 ensure that the user is identified and authenticated before SCD can be imported. FDP_ACC.1/SCD_Import and FDP_ACF.1/SCD_Import ensure that only authorised users can import SCD. OT.SCD_Secrecy (Secrecy of signature creation data) is provided by the security functions specified by the following SFR. FDP_UCT.1/SCD and FTP_ITC.1/SCD ensures the confidentiality for SCD import. FCS_CKM.1/SCD/SVD_Generation ensures the use of secure cryptographic algorithms for SCD/SVD generation. Cryptographic quality of SCD/SVD pair shall prevent disclosure of SCD by cryptographic attacks using the publicly known SVD. The security functions specified by FDP_RIP.1 and FCS_CKM.4 ensure that residual information on SCD is destroyed after the SCD has been use for signature creation and that destruction of SCD leaves no residual information. 109/128 The security functions specified by FDP_SDI.2/Persistent ensure that no critical data is modified which could alter the efficiency of the security functions or leak information of the SCD. FPT_TST.1 tests the working conditions of the TOE and FPT_FLS.1 guarantees a secure state when integrity is violated and thus assures that the specified security functions are operational. An example where compromising error conditions are countered by FPT_FLS.1 is fault injection for differential fault analysis (DFA). SFR FPT_EMS.1 and FPT_PHP.3 require additional security features of the TOE to ensure the confidentiality of the SCD. OT.Sig_Secure (Cryptographic security of the electronic signature) is provided by the cryptographic algorithms specified by FCS_COP.1/Sign, which ensures the cryptographic robustness of the signature algorithms. FDP_SDI.2/Persistent corresponds to the integrity of the SCD implemented by the TOE and FPT_TST.1 ensures self-tests ensuring correct signature creation. OT.Sigy_SigF (Signature creation function for the legitimate signatory only) is provided by an SFR for identification authentication and access control. FIA_UAU.1 and FIA_UID.1 ensure that no signature creation function can be invoked before the signatory is identified and authenticated. The security functions specified by FMT_MTD.1/Admin and FMT_MTD.1/Signatory manage the authentication function. SFR FIA_AFL.1/RAD provides protection against a number of attacks, such as cryptographic extraction of residual information, or brute force attacks against authentication. The security function specified by FDP_SDI.2/DTBS ensures the integrity of stored DTBS. The security functions specified by FDP_ACC.1/Signature_Creation and FDP_ACF.1/Signature_Creation provide access control based on the security attributes managed according to the SFR FMT_MTD.1/Signatory, FMT_MSA.2, FMT_MSA.3 and FMT_MSA.4. The SFR FMT_SMF.1 and FMT_SMR.1 list these management functions and the roles. These ensure that the signature process is restricted to the signatory. FMT_MOF.1 restricts the ability to enable the signature creation function to the signatory. FMT_MSA.1/Signatory restricts the ability to modify the security attributes SCD operational to the signatory. Furthermore, FDP_RIP.1 prevents misuse of any resources containing the SCD after de-allocation (e.g. after the signature creation process) and ensures that no attacker can get hold of the SCD (to create signatures outside the TOE) once SCD has been deleted by the legitimate signatory. FMT_MTD.1/Unblock ensures the unblocking of the RAD is made under the sole control of the administrator. In phase 6, the RAD (PIN or Biometric Data) may be loaded on the TOE by the Personalisation Agent as defined in FMT_SMF.1. The Personalisation Agent is authenticated with a mutual authentication performed with FCS_RNG.1 and FCS_COP.1/GP Auth, and is authenticated with FMT_SMR.1. Effort to bypass the access control by a frontal exhaustive attack is blocked by FIA_AFL.1/Auth keys. During the mutual authentication, a session encryption key is agreed between the TOE and the Personalisation Agent and used by the TOE to decrypt the RAD using FCS_COP.1/GP secret data Protection, ensuring the confidentiality of the RAD during its transfer in phase 6. In phase 6, FMT_MSA.1/ Signatory guarantees that the Personalisation Agent cannot sign on behalf of the signatory, ensuring the signature creation features remains under the sole control of the signatory. OT.DTBS_Integrity_TOE (DTBS/R integrity inside the TOE) ensures that the DTBS/R is not altered by the TOE. The integrity functions specified by FDP_SDI.2/DTBS require that the DTBS/R has not been altered by the TOE. OT.EMSEC_Design (Provide physical emanations security) covers that no intelligible information is emanated. This is provided by FPT_EMS.1.1. OT.Tamper_ID (Tamper detection) is provided by FPT_PHP.1 by the means of passive detection of physical attacks. OT.Tamper_Resistance (Tamper resistance) is provided by FPT_PHP.3 to resist physical attacks. 110/128 OT.TOE_SSCD_Auth (Authentication proof as SSCD) requires the TOE to provide security mechanisms to identify and to authenticate themselves as SSCD, which is directly provided by FIA_API.1 (Authentication proof of identity). The SFR FIA_UAU.1 allows establishment of the trusted channel before (human) user is authenticated. OT.TOE_TC_SVD_Exp (TOE trusted channel for SVD export) requires the TOE to provide a trusted channel to the CGA to protect the integrity of the SVD exported to the CGA, which is directly provided by  The SVD transfer for certificate generation is controlled by TSF according to FDP_ACC.1/SVD_Transfer and FDP_ACF.1/SVD_Transfer  FDP_DAU.2/SVD (Data authentication with identity of guarantor), which requires the TOE to provide CGA with the ability to verify evidence of the validity of the SVD and the identity of the user that generated the evidence.  FTP_ITC.1/SVD (inter-TSF trusted channel), which requires the TOE to provide a trusted channel to the CGA. OT.TOE_TC_VAD_Imp (Trusted channel of TOE for VAD import) is provided by FTP_ITC.1/VAD to provide a trusted channel to protect the VAD provided by the HID to the TOE. OT.TOE_TC_DTBS_Imp (Trusted channel of TOE for DTBS import) is provided by FTP_ITC.1/DTBS to provide a trusted channel to protect the DTBS provided by the SCA to the TOE and by FDP_UIT.1/DTBS, which requires the TSF to verify the integrity of the received DTBS. OT.Authentication_Secure (Secure authentication mechanisms) is provided by the cryptographic algorithms specified by (1) FCS_COP.1/DH Computation, FCS_COP.1/Certificate verification, FCS_COP.1/Asym Internal DAPP Auth, FCS_COP.1/Asym External DAPP Auth and FCS_RNG.1 for the mutual authentication based on an asymmetric scheme (DAPP), (2) FCS_RNG.1 and FCS_COP.1/Sym Device auth for the mutual authentication based on symmetric scheme, (3) FCS_RNG.1 and FCS_COP.1/GP Auth for the authentication of the personalisation agent and of the “TOE_Administrator”, (4) FCS_RNG.1 and FCS_COP.1.1/Sym Role Auth for the authentication of an entity based on a symmetric scheme, (5) FCS_COP.1/Certificate verification , FCS_COP.1/Asym Role Auth, and FCS_RNG.1 for the authentication of an entity based on an asymmetric scheme. All these requirements ensure the cryptographic robustness of the authentication mechanisms. The use of a challenge freshly generated by the TOE with FCS_RNG.1 in theses authentication protocols ensures a protection against replay attacks when authenticating external entities. FIA_AFL.1/Auth keys ensures a correct detection and protection of authentication failure or exhaustive attacks. The security function specified by FPT_TST.1 ensures that the security functions are performed correctly and FDP_SDI.2/Persistent guarantees the integrity of the authentication key(s) used by the TOE. FMT_SMR.1 and FMT_SMF.1 ensure the TOE can distinguish between external entities successfully authenticated (R.Admin) and can grant them dedicated rights. In case of authentication protocols involving the import of ephemeral public key on the TOE (using Card verifiable certificates), FDP_RIP.1 ensures that the key value is not kept by the TOE after usage and then can not be reused for a replay attack. This objective ensures as well the establishment of a trusted channel following a successful mutual authentication ( (1) and (2) ). This trusted channel ensures authenticity, integrity and confidentiality of communication. FCS_CKM.1/Session keys and FCS_COP.1/Data hashing generate session keys for the secure communication from a common secret agreed between the TOE and the external entity during the mutual authentication procedure. Any incoming command shall contain a MAC computed by the issuer with the session key agreed during the mutual authentication, so that any unauthenticated or non integer command is detected by the MAC verification performed by the TOE using FCS_COP.1/SM in integrity. The data exchanged through this trusted channel are also protected in confidentiality thanks to FCS_COP.1/SM in confidentiality, ensuring they can only be disclosed to the parties authenticated during the mutual authentication step. The encryption key is ephemeral as it is generated during the mutual authentication using a challenge freshly generated by the TOE using FCS_RNG.1, which ensures that dictionary attacks cannot be performed on encrypted data. When an integrity error is detected, or if the MAC is wrong (wrong authentication of the command issuer), the session keys (for 111/128 integrity and confidentiality) are erased thanks to FCS_CKM.4/Session keys so that they cannot be reused anymore, causing the trusted channel to be irreversibly lost. In particular, it ensures that encrypted data that may be caught by an attacker cannot be reused anymore to masquerade the TOE. In phase 6, the integrity and confidentiality of data is ensured by FCS_COP.1/GP secret data protection. The type of authentication scheme used by the TOE to authenticate the administrator or perform a mutual authentication may be controlled by the “TOE_Administrator”. It may enforce the TOE to allow the use of symmetric scheme ( (2) and (4) ) and/or asymmetric ( (1) and (5) ) schemes. The TSF specified by FIA_UID.1 and FIA_UAU.1 provide “TOE_Administrator” identification and authentication prior to enabling access to authorised functions. The attributes of the authenticated “TOE_Administrator” are provided by FMT_MSA.1/TOE Management, FMT_MSA.2, FMT_MSA.3 and FMT_MSA.4 for static attribute initialisation. Access control is provided by FDP_ACC.1/IAS ECC Administration, FDP_ACF.1/ IAS ECC Administration, FMT_SMR.1 and FMT_SMF.1. Effort to bypass the access control by a frontal exhaustive attack is blocked by FIA_AFL.1/Auth keys. The SSCD provides a proof of identity with FIA_API.1. This objective ensures as well that any authentication key is loaded in the TOE by an authenticated user, so that only genuine keys associated to genuine users are declared to the TOE. The key import defined by FMT_SMF.1 is protected by access control as mandated by FDP_ACF.1/ Key Management and FDP_ACC.1/ Key Management. It is protected by the proper Agent(s) authentication that cannot be bypassed to access these functions with the TSF specified by FIA_UID.1 and FIA_UAU.1. The agent entitled to load the authentication key is (are) authenticated with FMT_SMR.1. Effort to bypass the access control by a frontal exhaustive attack is blocked by FIA_AFL.1/RAD and FIA_AFL.1/Auth keys. OT.SCD/SVD_Management (Management of SCD/SVD) enforces the link between SCD and the matching certificate. This objective is ensured by FMT_MTD.1/SCD and SCD_ID that guarantees and unambiguous link between the SCD and its identifier, which is connected to the certificate. OT.Key_LifeCycle_Security (Lifecycle security of the key(s) stored in the TOE) The keys management is controlled by TSF according to FDP_ACC.1/Key management, FDP_ACF.1/Key management. Keys import is controlled by TSF according to FDP_ITC.1/Keys and keys export is controlled by TSF according to FDP_ETC.1/Keys. Secure Keys generation is ensured by FCS_CKM.1/Keys. The secure keys usage is ensured cryptographically according to FCS_COP.1/DH Computation, FCS_COP.1/C/S Auth, FCS_COP.1/Enc key Decipherement, FCS_COP.1/Sym Role Auth, FCS_COP.1/Asym Role Auth, FCS_COP.1/Sym Device Auth, FCS_COP.1/Certificate verification, FCS_COP.1/Asym internal DAPP Auth, FCS_COP.1/Asym external DAPP Auth. Keys usage is controlled by access control FDP_ACC.1/Keys management, FDP_ACF.1/Keys management which is based on the security attribute secure TSF management according to FMT_MSA.1/Key management, FMT_MSA.2, FMT_MSA.3, FMT_SMF.1 and FMT_SMR.1. The test functions FPT_TST.1 provides failure detection throughout the lifecycle. The SFR FCS_CKM.4 ensures a secure keys destruction. OT.Keys_Secrecy (Secrecy of key(s) stored in the TOE) is provided by the security functions specified by the following SFR. FDP_ITC.1/Keys controls the key(s) import and FDP_ETC/Keys controls the key(s) export. FCS_CKM.1/Keys ensure the use of secure cryptographic algorithms for keys generation. Cryptographic quality of the asymmetric key pair(s) shall prevent disclosure of the TOE’s private authentication key(s) and eServices key(s) by cryptographic attacks using the publicly known public key. The security functions specified by FDP_RIP.1 and FCS_CKM.4 ensure that residual information on a key(s) is destroyed after a key has been used for authentication (verification or proof) or an eServices keys has been used and that destruction of key(s) leaves no residual information. 112/128 The security functions specified by FDP_SDI.2/Persistent ensure that no critical data is modified which could alter the efficiency of the security functions or leak information of the authentication key. FPT_TST.1 tests the working conditions of the TOE and FPT_FLS.1 guarantees a secure state when integrity is violated and thus assures that the specified security functions are operational. An example where compromising error conditions are countered by FPT_FLS.1 is fault injection for differential fault analysis (DFA). FPT_EMS.1 and FPT_PHP.3 require additional security features of the TOE to ensure the confidentiality of the key(s). OT.TOE_AuthKey_Unique (Uniqueness of the TOE authentication key(s)) implements the requirement of practically unique TOE’s authentication private key, which is provided by the cryptographic algorithms specified by FCS_CKM.1/Keys. OT.Lifecycle_Management (Management of the TOE life cycle) ensures a correct separation of the TOE life cycle between phase 6 and 7. In phase 6, FMT_MTD.1/TOE State ensures the TOE irreversibly switches from phase 6 to phase 7 under the sole control of the Personalisation Agent. The Personalisation Agent is authenticated with a mutual authentication performed with FCS_RNG.1 and FCS_COP.1/GP Auth and is authenticated with FMT_SMR.1. Effort to bypass the access control by a frontal exhaustive attack is blocked by FIA_AFL.1/Auth keys. In phase 7, FDP_ACC.1/Signature creation, FDP_ACC.1/SVD transfer, FDP_ACC.1/SCD/SVD_Generation, FDP_ACC.1/SCD import, FDP_ACC.1/IAS ECC Administration, FDP_ACC.1/Key Management, FDP_ACF.1/Signature creation, FDP_ACF.1/SVD transfer, FDP_ACF.1/SCD/SVD_Generation, FDP_ACF.1/SCD import, FDP_ACF.1/IAS ECC Administration, FDP_ACF.1/Key Management, FMT_MTD.1/Unblock, FMT_MOF.1, FMT_MTD.1/Admin, FMT_MTD.1/Signatory ensures the Personalization Agent does not control the TOE anymore. In phase 6, the Personalization Agent has complete control over the administrative functions of the TOE. It may import, erase, generate SCD/SVD, export SVD, manage Keys, create RAD and manage the configuration of the TOE as mandated in FMT_SMF.1, according to the security policies defined in FDP_ACC.1/SVD transfer, FDP_ACC.1/SCD/SVD_Generation, FDP_ACC.1/SCD import, FDP_ACC.1/IAS ECC Administration, FDP_ACC.1/Key Management, FDP_ACF.1/SVD transfer, FDP_ACF.1/SCD/SVD_Generation, FDP_ACF.1/SCD import, FDP_ACF.1/IAS ECC Administration, FDP_ACF.1/Key Management, FDP_ETC.1/Keys. It may as well change TOE State (FMT_MTD.1/TOE State), load the serial number of the TOE (FMT_MTD.1/TOE Serial Number). These functions are protected by the Personalisation Agent authentication that cannot be bypassed to access these functions with the TSF specified by FIA_UID.1 and FIA_UAU.1. FMT_MSA.1/Admin, FMT_MSA.1/TOE Management, FMT_MSA.1/Key Management, FMT_MSA.2, FMT_MSA.3 ensure that the sole Personalisation Agent can realize these functions. Effort to bypass the access control by a frontal exhaustive attack is blocked by FIA_AFL.1/Auth keys. OT.eServices (Provision of eServices) is provided by the cryptographic mechanisms specified by (1) FCS_COP.1/DH Computation, (2) FCS_COP.1/Certificate verification, (3) FCS_COP.1/C/S Auth, (4) FCS_COP.1/Enc key decipherment. These requirements ensure the cryptographic robustness of these eServices. The eServices keys may be loaded, generated, and the matching public key may be exported as required by FMT_SMF.1. The Agent(s) entitled to perform such operations shall be authenticated with FMT_SMR.1 using cryptographic protocols (1) FCS_COP.1/DH Computation, FCS_COP.1/Certificate verification, FCS_COP.1/Asym Internal DAPP Auth, FCS_COP.1/Asym External DAPP Auth, and FCS_RNG.1 for the mutual authentication based on an asymmetric scheme (DAPP), (2) FCS_RNG.1 and FCS_COP.1/Sym Device auth for the mutual authentication based on symmetric scheme, (3) FCS_RNG.1 and FCS_COP.1/Sym Role Auth for the authentication of an entity based on a symmetric scheme, (4) FCS_COP.1/Certificate verification , FCS_COP.1/Asym Role Auth, and FCS_RNG.1 for the authentication of an entity based on an asymmetric scheme. These functions are protected by the proper Agent(s) authentication that cannot be bypassed to access these functions with the TSF specified by FIA_UID.1 and FIA_UAU.1. Effort to bypass the access control by a frontal exhaustive attack is blocked by FIA_AFL.1/RAD and FIA_AFL.1/Auth keys. 113/128 8.3.3 Satisfaction of dependencies of security requirements 8.3.3.1 Dependencies Functional Requirement Dependencies Satisfied by FCS_CKM.1/SCD/SVD_Generation [FCS_CKM.2 or FCS_COP.1], FCS_CKM.4 FCS_COP.1/Sign FCS_CKM.4 FCS_CKM.1/Keys [FCS_CKM.2 or FCS_COP.1], FCS_CKM.4 FCS_COP.1/C/S Auth FCS_COP.1/Enc Key Decipherment FCS_COP.1/Certificate verification FCS_COP.1/Asym Internal DAPP Auth FCS_CKM.4 FCS_CKM.1/Session Keys [FCS_CKM.2 or FCS_COP.1], FCS_CKM.4 FCS_COP.1/SM in confidentiality FCS_COP.1/SM in integrity FCS_CKM.4/Session Keys FCS_CKM.4 [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1] FDP_ITC.1/SCD FDP_ITC.1/Keys FCS_CKM.1/SCD/SVD_Generation FCS_CKM.1/Keys FCS_CKM.4/Session keys [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1] FCS_CKM.1/Session Keys FCS_COP.1/Sign [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_ITC.1/SCD FCS_CKM.1/SCD/SVD_Generation FCS_CKM.4 FCS_COP.1/DH Computation [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_ITC.1/Keys FCS_CKM.1/Keys FCS_CKM.4 FCS_COP.1/SM in confidentiality [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_CKM.1/Session Keys FDP_CKM.4/Session keys FCS_COP.1/SM in integrity [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_CKM.1/Session Keys FDP_CKM.4/Session keys FCS_COP.1/data hashing [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 Not satisfied (See §1.1.1.1) FCS_COP.1/C/S Auth [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_ITC.1/Keys FCS_CKM.1/Keys FCS_CKM.4 FCS_COP.1/Enc key decipherment [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_ITC.1/Keys FCS_CKM.1/Keys FCS_CKM.4 FCS_COP.1/Sym role Auth [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_ITC.1/Keys FCS_CKM.1/Keys FCS_CKM.4 FCS_COP.1/Sym Device Auth [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_ITC.1/Keys FCS_CKM.1/Keys FCS_CKM.4 FCS_COP.1/Certificate verification [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 Not satisfied (See §1.1.1.1) 114/128 Functional Requirement Dependencies Satisfied by FCS_COP.1/Asym Role Auth [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 Not satisfied (See §1.1.1.1) FCS_COP.1/Asym Internal DAPP Auth [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 FDP_ITC.1/Keys FCS_CKM.1/Keys FCS_CKM.4 FCS_COP.1/Asym External DAPP Auth [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 Not satisfied (See §1.1.1.1) FCS_COP.1/GP secret data protection [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 Not satisfied (See §1.1.1.1) FCS_COP.1/GP Auth [FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4 Not satisfied (See §1.1.1.1) FCS_RNG.1 No dependencies n/a FDP_ACC.1/SCD/SVD_Generation FDP_ACF.1 FDP_ACF.1/SCD/SVD_Generation FDP_ACC.1/SCD_Import FDP_ACF.1 FDP_ACF.1/SCD_Import FDP_ACC.1/SVD_Transfer FDP_ACF.1 FDP_ACF.1/SVD_Transfer FDP_ACC.1/Signature_Creation FDP_ACF.1 FDP_ACF.1/Signature_Creation FDP_ACC.1/IASECC Administration FDP_ACF.1 FDP_ACF.1/IASECC Administration FDP_ACC.1/Key management FDP_ACF.1 FDP_ACF.1/Key management FDP_ACF.1/SCD/SVD_Generation FDP_ACC.1 FMT_MSA.3 FDP_ACC.1/SCD/SVD_Generation FMT_MSA.3 FDP_ACF.1/SCD_Import FDP_ACC.1 FMT_MSA.3 FDP_ACC.1/SCD_Import FMT_MSA.3 FDP_ACF.1/SVD_Transfer FDP_ACC.1 FMT_MSA.3 FDP_ACC.1/SVD_Transfer FMT_MSA.3 FDP_ACF.1/Signature_Creation FDP_ACC.1 FMT_MSA.3 FDP_ACC.1/Signature_Creation FMT_MSA.3 FDP_ACF.1/IASECC Administration FDP_ACC.1 FMT_MSA.3 FDP_ACC.1/IASECC Administration FMT.MSA.3 FDP_ACF.1/Key management FDP_ACC.1 FMT_MSA.3 FDP_ACC.1/Key management FMT_MSA.3 FDP_RIP.1 No dependencies n/a FDP_SDI.2/Persistent No dependencies n/a FDP_SDI.2/DTBS No dependencies n/a FDP_ITC.1/SCD [FDP_ACC.1 or FDP_IFC.1] FMT_MSA.3 FDP_ACC.1/SCD_Import FMT_MSA.3 FDP_ITC/Keys [FDP_ACC.1 or FDP_IFC.1] FMT_MSA.3 FDP_ACC.1/Key management FMT_MSA.3 FDP_UCT.1/SCD [FTP_ITC.1 or FTP_TRP.1], [FDP_ACC.1 or FDP_IFC.1] FTP_ITC.1/SCD FDP_ACC.1/SCD_Import FDP_DAU.2/SVD FIA_UID.1 FIA_UID.1 FDP_UIT.1/DTBS [FDP_ACC.1 or FDP_IFC.1], [FTP_ITC.1 or FTP_TRP.1] FDP_ACC.1/Signature_Creation FTP_ITC.1/DTBS FDP_ETC/Keys [FDP_ACC.1 or FDP_IFC.1] FDP_ACC.1/Keys management FIA_UAU.1 FIA_UID.1 FIA_UID.1 FIA_UID.1 No dependencies n/a FIA_AFL.1/RAD FIA_UAU.1 FIA_UAU.1 FIA_AFL.1/Auth keys FIA_UAU.1 FIA_UAU.1 FIA_API.1 No dependencies n/a FMT_SMR.1 FIA_UID.1 FIA_UID.1 FMT_SMF.1 No dependencies n/a FMT_MOF.1 FMT_SMR.1, FMT_SMR.1, 115/128 Functional Requirement Dependencies Satisfied by FMT_SMF.1 FMT_SMF.1 FMT_MSA.1/Admin [FDP_ACC.1 or FDP_IFC.1], FMT_SMR.1, FMT_SMF.1 FDP_ACC.1/SCD/SVD_Generation, FDP_ACC.1/SCD_Import FMT_SMR.1 FMT_SMF.1 FMT_MSA.1/Signatory [FDP_ACC.1 or FDP_IFC.1], FMT_SMR.1, FMT_SMF.1 FDP_ACC.1/Signature_Creation, FMT_SMR.1, FMT_SMF.1 FMT_MSA.1/Key management [FDP_ACC.1 or FDP_IFC.1], FMT_SMR.1, FMT_SMF.1 FDP_ACC.1/Key management, FMT_SMR.1, FMT_SMF.1 FMT_MSA.1/TOE management [FDP_ACC.1 or FDP_IFC.1], FMT_SMR.1, FMT_SMF.1 FDP_ACC.1/IASECC Administration, FMT_SMR.1, FMT_SMF.1 FMT_MSA.2 [FDP_ACC.1 or FDP_IFC.1], FMT_MSA.1, FMT_SMR.1 FDP_ACC.1/SCD/SVD_Generation, FDP_ACC.1/SCD_Import FDP_ACC.1/Signature_Creation, FMT_MSA.1/Admin, FMT_MSA.1/Signatory FMT_MSA.1/Key management FMT_MSA.1/TOE management FMT_SMR.1, FMT_MSA.3 FMT_MSA.1 FMT_SMR.1 FMT_MSA.1/Admin, FMT_MSA.1/Signatory, FMT_SMR.1 FMT_MSA.4 [FDP_ACC.1 or FDP_IFC.1] FDP_ACC.1/SCD/SVD_Generation, FDP_ACC.1/SCD_Import, FDP_ACC.1/Signature_Creation FMT_MTD.1/Admin FMT_SMR.1, FMT_SMF.1 FMT_SMR.1, FMT_SMF.1 FMT_MTD.1/Signatory FMT_SMR.1, FMT_SMF.1 FMT_SMR.1, FMT_SMF.1 FMT_MTD.1/Unblock FMT_SMR.1, FMT_SMF.1 FMT_SMR.1, FMT_SMF.1 FMT_MTD.1/SCD and SCD ID FMT_SMR.1, FMT_SMF.1 FMT_SMR.1, FMT_SMF.1 FMT_MTD.1/TOE Serial Number FMT_SMR.1, FMT_SMF.1 FMT_SMR.1, FMT_SMF.1 FMT_MTD.1/TOE state FMT_SMR.1, FMT_SMF.1 FMT_SMR.1, FMT_SMF.1 FPT_EMS.1 No dependencies n/a FPT_FLS.1 No dependencies n/a FPT_PHP.1 No dependencies n/a FPT_PHP.3 No dependencies n/a FPT_TST.1 No dependencies n/a FTP_ITC.1/SCD No dependencies n/a FTP_ITC.1/SVD No dependencies n/a FTP_ITC.1/VAD No dependencies n/a FTP_ITC.1/DTBS No dependencies n/a Table 2 - Satisfaction of dependencies of SFR Assurance Requirement Dependencies Satisfied by 116/128 EAL5 package (dependencies of EAL5 package are not reproduced here) By construction, all dependencies are satisfied in a CC EAL package AVA_VAN.5 ADV_ARC.1 ADV_FSP.4 ADV_TDS.3 ADV_IMP.1 AGD_OPE.1 AGD_PRE.1 ATE_DPT.1 ADV_ARC.1 ADV_FSP.4 ADV_TDS.3 ADV_IMP.1 AGD_OPE.1 AGD_PRE.1 ATE_DPT.1 (all are included in EAL5 package) ALC_DVS.2 No dependencies n/a Table 3 - Satisfaction of dependencies of SAR 1.1.1.1 Justifications for non satisfaction of dependencies FCS_COP.1/data hashing: The cryptographic algorithms SHA-1 and SHA-256 do not use any cryptographic key. Therefore none of the SFRs listed in the dependencies ([FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1], FCS_CKM.4) are needed to be defined for this specific instantiation of FCS_COP.1. FCS_COP.1/Certificate verification : Two situations occur. 1- During the first round of certificate verification, the TOE uses a Root certificate verification public key. When using this key, the following dependencies apply FDP_ITC.1/Keys and FCS_CKM.4. As this certificate verification public key may be generated by the TOE, the following dependency applies: FCS_CKM.1/Keys The certificate contains an ephemeral public key protected by a cryptogram that only the certificate verification public key can check. Upon successful verification of the certificate (ensured by FCS_COP.1.1 / Certificate Verification), the ephemeral public key nested within the certificate is securely imported in the TOE for the next use 2- In next step(s), the certificate is verified with the ephemeral key (which is extracted from a former certificate verification step).The certificate contains a public key protected by a cryptogram that only the certificate verification public key (which is trusted) can check. Upon successful verification of the certificate (ensured by FCS_COP.1.1 / Certificate Verification), the key nested within the certificate (which is an ephemeral key) is securely imported in the TOE for the next use When the certificate verification fails, or when the sequence for certificate verification fails, the ephemeral public key is erased with FDP_RIP.1. FCS_COP.1/Asym Role Auth and FCS_COP.1/Asym External DAPP Auth: The key used for authentication is an ephemeral key. It is securely imported on the TOE through successful certificate verification (ensured by FCS_COP.1.1 / Certificate Verification) and by the initial link of trust coming from the Root Certificate verification public key, the following dependencies apply: FDP_ITC.1/Keys and FCS_CKM.4. When the User Authentication fails, or when the sequence for authentication is not fulfilled, the ephemeral public key is erased with FDP_RIP.1. FCS_COP.1/GP auth and FCS_COP.1/GP secret data protection: The applet provides this service via the platform, it doesn’t own and cannot access the keys used to protect secret data. Their import/generation and destruction are managed by the platform via FDP_CKM.1 and FCS_CKM.4 117/128 118/128 TOE SUMMARY SPECIFICATIONS The TOE inherits all the security functions provided by the underlying javacard open platform [PLT] (see the Security target). On top of these, it adds some supplemental security functions that are described hereafter. 9.1 SF.RAD_MGT This security function is involved in the management of the RAD, whether it is PIN or Biometric based. It ensures the link between each RAD(s) and its associated role (S.Sigy and S.Admin). It enforces access control over any management operation on the RAD:  In phase 6, it only allows the RAD(s) to be created by the Personalisation Agent. It requires the RAD to be encrypted in order to ensure its confidentiality. This security function ensures the Personalisation Agent can not verify the RAD, and impersonate the role R.Sigy.  In phase 7, it only allows the RAD(s) to be created by R.Admin. Once loaded, the RAD can only be changed under control of R.Sigy and unblocked by the R.Admin.  In phase 7, it allows the TOE to authenticate any Role using a RAD comparison (R.Sigy, and R.Admin if it uses a RAD). This security function manages the validation process of the role associated to the RAD (R.Sigy or S.Admin). It performs the comparison of the VAD with the RAD, and upon successful comparison it authenticates the associated role. Each RAD is associated to an error counter which aims at ensuring its protecting against brute force attacks. Upon each submission of an incorrect VAD, it decrements the error counter, and restores it to its maximum value upon a successful VAD submission. When the error counter has reached ‘00’, the security function blocks the usage of the RAD, and in particular bans the authentication of the associated role, and the ability to change the RAD value (for both R.Sigy and R.Admin). Once blocked, the security function allows the unblocking of the RAD after the successful authentication of R.Admin (please note that the R.Admin required to unblock the RAD may be different from the one associated to the blocked RAD if ever). This security function also ensures secure deallocation of VAD after verification and RAD after update. This security function allows managing the RAD either through APDU commands, or through shared interfaces (using sharing mechanism). They enable other applets potentially present on the javacard platform to manage the RAD. The security function ensures the same security policy is applied on both interfaces, so that there are no logical backdoor on the RAD management. This security function relies on SF.DEV_AUTH and SF.ADM_AUTH to authenticate R.Admin required to create the RAD. 9.2 SF.SIG This security function manages the signature creation service. It enforces access control over the signature creation service:  In phase 6, it ensures the signature computation function is not accessible, and in particular that the Personalization Agent cannot sign on behalf of the Signatory.  In phase 7, it ensures the signature creation feature is activated only by the signatory.  In phase 7, it enforces the integrity of DTBS, and ensures that R.Sigy is successfully authenticated before creating the signature. The security function enables to select the signature key to be used for the signature creation among all the signature key hold by the TOE. 119/128 The security function ensures the data hashing (if hash on card, or partial hashing is used), and the secure signature computation using either a RSA or ECDSA private key (SCD). During the signature creation, the coherency with the matching signature public key (SVD) is verified. This security function relies on:  SF.DEV_AUTH to establish a trusted channel with the SCA  SF.RAD_MGT to authenticate the Signatory  SF.SM to transmit the DTBS 9.3 SF.DEV_AUTH This security function manages the device authentication between the TOE and an external entity. The device authentication is a mutual authentication between the TOE and an external entity that may be either realized using symmetric or asymmetric cryptography. Upon successful mutual authentication, the security function computes a shared secret (called the seed) from random numbers generated by both the TOE and the external entity and known only to them. The seed is then used by SF.SM to generate session keys to protect communication in integrity, authenticity and confidentiality, and then maintain the trusted channel. As such, this security function allows generating a trusted channel with an external entity. This security function allows the mutual authentication with the following external entities:  Personalisation Agent (phase 6)  SCA (phase 6 & 7), mingled with the personalisation agent in phase 6  CSP (phase 6 & 7), mingled with the personalisation agent in phase 6  HID (phase 6 & 7), mingled with the personalisation agent in phase 6  IFD (phase 7) It authenticates also the SSCD and proves its identity. This security function manages as well the validation process of the role associated to the authentication key used by the trusted IT entity. Upon successful device authentication, the associated role is authenticated. Each key is associated to an error counter (it may be infinite) which aims at ensuring its protecting against brute force attacks. Upon each wrong authentication, it decrements the error counter (if present), and restores it to its maximum value upon a successful authentication. When the error counter has reached ‘00’, the security function blocks the usage of the key, and bans the authentication of the associated role. 9.4 SF.ADM_AUTH This security function manages the authentication of external entities by the TOE. It is only active in phase 7. This security function enables the TOE to authenticate external entities and may be either realized using symmetric or asymmetric cryptography. This security function manages as well the validation process of the role associated to the authentication key used by the external entity. Upon successful authentication, the associated role is authenticated. Each key is associated to an error counter (it may be infinite) which aims at ensuring its protecting against brute force attacks. Upon each wrong authentication, it decrements the error counter (if present), and restores it to its maximum value upon a successful authentication. When the error counter has reached ‘00’, the security function blocks the usage of the key, and bans the authentication of the associated role. This security function allows the authentication of the following roles:  TOE_Administrator  User_Admin 120/128 9.5 SF.SM This security function ensures the protection of communication between the TOE and an external entity. As such, this security function maintains a trusted channel. This security function requires the TOE and the external entity to establish first a trusted channel using a device authentication (mutual) with SF.DEV_AUTH. It ensures the following properties:  In phase 6, it maintains the confidentiality, integrity and authenticity of the private keys (including the SCD), the symmetric keys (DES and AES), and the RAD (PIN and biometric template)  In phase 6, it maintains the integrity and authenticity of the asymmetric public key (including the SVD) when being exported to the outside  In phase 7, it maintains the confidentiality, integrity and authenticity of communication exchanged between the TOE and the external entity. In phase 7, the confidentiality, integrity and authenticity of data is ensured by cryptographic means based on symmetric cryptography. Data are encrypted and signed using the symmetric session keys generated from the seed agreed during the device (mutual) authentication (see SF.DEV_AUTH). Moreover, the protection against replay attacks is ensured by the signature which is computed using a dynamic ICV, incremented at each new command. In phase 6, the confidentiality (for the SCD), integrity and authenticity (for the SVD), is ensured by cryptographic means based on symmetric cryptography. Data are encrypted using the symmetric session keys generated from the seed agreed during the device (mutual) authentication (see SF.DEV_AUTH). The integrity of the SVD is ensured by the This security function is also in charge of building the session keys from the seed computed by SF.DEV_AUTH. These session keys are ephemeral and unique, as the seed is computed from random numbers generated by the TOE and the external entity. This security function is also in charge of destroying the session keys in case an error is detected (data not authentic or not integer), or when a command in plan text is sent. 9.6 SF.KEY_MGT This security function is involved in the management of the keys (including SCDs and SVDs). It enforces access control over any management operation on the keys:  In phase 6, it only allows the key (including the SCD and SVD, and the DH parameters) to be loaded, generated and exported (for the public keys) by the Personalisation Agent. It also requires the private and secret keys to be encrypted in order to ensure their confidentiality. This security function ensures the Personalisation Agent can not use the keys it has loaded or generated. It ensures the personalisation Agent can not impersonate the associated role (in case of authentication keys), or create a signature with the SCD.  In phase 7, it enforces access control over the management operations on the SCD and SVD (import, generation and export) and ensures the SCD is loaded in an encrypted form to ensure its confidentiality.  In phase 7, it enforces access control over the management operations on the authentication and eServices keys (import, generation, and export of public keys) and the DH parameters (loading). It ensures that any loading, generation or public export operation is performed by an authenticated entity (Signatory, IFD, SCA, CSP, User_Admin), according to the TOE configuration. This security function also ensures that after update or generation, the key (including SCD and SVD) are securely destroyed. 121/128 This security function relies on:  SF.DEV_AUTH to establish the trusted channel with the SSCD type 1  SF.RAD_MGT to authenticate the Signatory  SF.DEV_AUTH and SF.ADM_AUTH to authenticate the roles entitled to perform the operations  SF.SM to maintain the trusted channel and transmit the DTBS 9.7 SF.CONF This security function manages the configuration of the TOE. 1) It allows the modification of the following TOE attributes in both phase 6 and 7:  Communication medium : contact and/or contactless  Type of cryptography to be used for the external entities and subject authentication (symmetric or asymmetric)  Type of DTBS to be used: the DTBS representation fully computed outside the TOE may be used This security function ensures their initialization to a default values when the applet instance is created, and apply an access control over modification. Only the successfully authenticated Personalisation Agent (in phase 6) or “TOE_Administrator” (phase 7) can modify these attributes. 2) It also allows the modification of the following TOE attributes in phase 6:  TOE serial number  TOE State This security function ensures an access control over these operations. Only the successfully authenticated Personalisation Agent can modify these attributes. 3) It also allows the modification in phase 5 of the ability to retrieve the identification data of the TOE. The security function ensures an access control over this operation. Only the successfully authenticated Manufacturing Agent (phase 5) can modify these attributes. This security function relies on  SF.DEV_AUTH to authenticate the role personalisation Agent  SF.ADM_AUTH to authenticate the role TOE_Administrator 9.8 SF.ESERVICE This security function enables to perform electronic services. It is active in phase 7. This security function offers the following electronic services:  C/S authentication  Decryption key decipherment  Certificate verification 9.9 SF.SAFESTATE_MGT This security function ensures the TOE is always in a safe state. It monitors the integrity of the TOE, its assets and the TSF data (RAD, keys, DTBS) by performing selftests. When an unexpected event occurs (loss of power, loss of integrity, tearing,…), it ensures  the TOE returns in a safe state  all sensitive data are erased  the TOE returns in a restrictive secure state 122/128 When a major issue is detected, the security function ensures the destruction of the TOE, so that the assets are not accessible anymore. 9.10 SF.PHYS This security function ensures the protection of the TOE against physical manipulation aiming at getting access to its assets. In particular, it ensures that the TOE  detects physical manipulation (I/O manipulation, EM perturbation, temperature perturbation,…) and takes countermeasures.  is protected against probing and that there is no information leakage that may be used to reconstruct sensitive data When a major issue is detected, the security function ensures the destruction of the TOE, so that the assets are not accessible anymore. 123/128 ANNEX A – COMPOSITION WITH THE UNDERLYING JAVACARD PLATFORM This annex discusses the composition with the underlying javacard platform [PLT] according to [JIL-COMP]. Evaluation assurance Level The underlying javacard open platform [PLT] is certified at level EAL 5 augmented with AVA_VAN.5 and ALC_DVS.2. As such it complies with the Evaluation level assurance of the composite TOE. Coverage of the Assumptions of the Javacard Open Platform (A.PLT vs TOE) Assumption of [PLT] Rationale A.APPLET No Native API can be nested within Applet loaded in post issuance as the platform only allows the loading of javacard bytecode A.VERIFICATION This assumption is upheld by OE.VERIFICATION and OE.CODE_EVIDENCE. These objectives are fulfilled by the applet included in the TOE (see §0). For the other applet that may be loaded on the TOE, it is covered by recommendations in [AGD_OPE] whose fulfilment shall be verified by the risk manager. Coverage of the OSP of the Javacard Open Platform (OSP.PLT vs TOE) OSP of [PLT] Rationale OSP.VERIFICATION This OSP is upheld by OE.VERIFICATION and OE.CODE_EVIDENCE. These objectives are fulfilled by the applet included in the TOE (see §0). For the other applet that may be loaded on the TOE, it is covered by recommendations in [AGD_OPE] whose fulfilment shall be verified by the risk manager. Coverage of the security objective of the Javacard Open Platform Environment (OE.PLT vs TOE) Security objective of [PLT] environment Rationale OE.APPLET No Native API can be nested within Applet loaded in post issuance as the platform only allows the loading of javacard bytecode OE.VERIFICATION This objective is fulfilled by the applet included in the TOE. The applet is verified then included in the generated platform in Oberthur technologies facilities. For the other applet that may be loaded on the TOE, it is covered by recommendations in [AGD_OPE] whose fulfilment shall be verified by the risk manager. OE.CODE-EVIDENCE The verified applet is included in the TOE pre-issuance in Oberthur Technologies facilities then the whole TOE is sent to the manufacturer according to audited organizational measures. It ensures that it has not been changed since the code verification required in OE.VERIFICATION. Support of the TOE TSFs by the Javacard Open Platform TSFs (TSF.TOE vs TSF.SFR) The following table shows how the security functions of the Composite TOE are supported by the security functions of the underlying javacard open platform: 124/128 TSF of the TOE Supported by the following TSF of [PLT] SF.RAD_MGT SF_CARDHOLDER_VERIFICATION SF.SIG SF_ENCRYPTION_AND_DECRYPTION SF_KEY_ACCESS SF_MESSAGE_DIGEST SF_RANDOM_NUMBER SF_SIGNATURE SF.DEV_AUTH SF_ENCRYPTION_AND_DECRYPTION SF_ENTITY_AUTHENTICATION/SECURE_CHANNEL SF_KEY_ACCESS SF_MESSAGE_DIGEST SF_RANDOM_NUMBER SF_SIGNATURE SF.ADM_AUTH SF_ENCRYPTION_AND_DECRYPTION SF_ENTITY_AUTHENTICATION/SECURE_CHANNEL SF_KEY_ACCESS SF_MESSAGE_DIGEST SF_RANDOM_NUMBER SF_SIGNATURE SF.SM SF_ENCRYPTION_AND_DECRYPTION SF_ENTITY_AUTHENTICATION/SECURE_CHANNEL SF_KEY_ACCESS SF_KEY_DISTRIBUTION SF_MESSAGE_DIGEST SF_SIGNATURE SF.KEY_MGT SF_KEY_ACCESS SF_KEY_DESTRUCTION SF_KEY_GENERATION SF.CONF SF_PREPERSONALISATION SF.ESERVICE SF_ENCRYPTION_AND_DECRYPTION SF_KEY_ACCESS SF_KEY_AGREEMENT SF_MESSAGE_DIGEST SF_SIGNATURE SF.SAFESTATE_MGT SF_ATOMIC_TRANSACTION SF_CLEARING_OF_SENSITIVE_INFORMATION SF_DATA_COHERENCY SF_DATA_INTEGRITY SF_EXCEPTION SF_FIREWALL SF_KEY_DESTRUCTION SF_KEY_MANAGEMENT SF_MEMORY_FAILURE SF_RUNTIME_VERIFIER SF_SIGNATURE SF_ENCRYPTION_AND_DECRYPTION SF.PHYS SF_HARDWARE_OPERATING SF_SIGNATURE SF_ENCRYPTION_AND_DECRYPTION SF_UNOBSERVABILITY Support of the TOE SFRs by the Javacard Open Platform SFRs (SFR.TOE vs SFR.PLT) The following table shows how the SFRs of the Composite TOE are supported by the SFRs of the underlying javacard open platform: 125/128 SFRs of the TOE Supported by [PLT] SFRs of [PLT] FCS_CKM.1/SCD/SVD_Generation Fully FCS_CKM.1 FCS_CKM.1/Keys Fully FCS_CKM.1 FCS_CKM.1/Session Keys N/A N/A FCS_CKM.4 Fully FCS_CKM.4 FCS_CKM.4.1 / Session keys Fully FCS_CKM.4 FDP_RIP.1/TRANSIENT ensures destruction of session keys upon card reset FCS_COP.1/Sign Partially FCS_COP.1 FCS_COP.1/DH Computation Fully FCS_COP.1 FCS_COP.1/SM in confidentiality Fully FCS_COP.1 FCS_COP.1/SM in integrity Fully FCS_COP.1 FCS_COP.1/data hashing Fully FCS_COP.1 FCS_COP.1/C/S Auth Partially FCS_COP.1 FCS_COP.1/Enc key decipherment Fully FCS_COP.1 FCS_COP.1/Sym role Auth Partially FCS_COP.1 FCS_COP.1/Sym Device Auth Partially FCS_COP.1 FCS_COP.1/Certificate verification Partially FCS_COP.1 FCS_COP.1/Asym Role Auth Partially FCS_COP.1 FCS_COP.1/Asym Internal DAPP Auth Partially FCS_COP.1 FCS_COP.1/Asym External DAPP Auth Partially FCS_COP.1 FCS_COP.1/GP secret data protection Fully FCS_COP.1/CM FCS_COP.1/GP Auth Fully FCS_COP.1/CM FCS_RNG.1 Fully FCS_RNG.1/SCP FDP_ACC.1/SCD/SVD_Generation N/A N/A FDP_ACC.1/SCD_Import N/A N/A FDP_ACC.1/SVD_Transfer N/A N/A FDP_ACC.1/Signature_Creation N/A N/A FDP_ACC.1/IASECC Administration N/A N/A FDP_ACC.1/Key management N/A N/A FDP_ACF.1/SCD/SVD_Generation N/A N/A FDP_ACF.1/SCD_Import N/A N/A FDP_ACF.1/SVD_Transfer N/A N/A FDP_ACF.1/Signature_Creation N/A N/A FDP_ACF.1/IASECC Administration N/A N/A FDP_ACF.1/Key management N/A N/A FDP_RIP.1 Partially FDP_RIP.1/OBJECTS FDP_RIP.1/ABORT FDP_RIP.1/APDU FDP_RIP.1/bArray FDP_RIP.1/KEYS FDP_RIP.1/TRANSIENT FDP_RIP.1/ADEL FDP_RIP.1/ODEL FDP_SDI.2/Persistent Fully FDP_SDI.2 for the PINs, Biometric templates, keys and data stored in a secure store object FCS_CKM.3 provides access to the signature key used for integrity control of DH parameters FCS_COP.1 provides cryptographic means 126/128 for the signature computation/verification of DH parameters FDP_SDI.2/DTBS Partially FCS_CKM.3 provides access to the signature key used for integrity control FCS_COP.1 provides cryptographic means for the signature computation/verification FDP_ITC.1/SCD Partially FCS_CKM.2 FCS_CKM.3 FDP_ITC/Keys Partially FCS_CKM.2 FCS_CKM.3 FDP_UCT.1/SCD Partially FCS_CKM.3 FDP_DAU.2/SVD Partially FCS_CKM.3 FDP_UIT.1/DTBS Partially FCS_CKM.3 FDP_ETC/Keys Partially FCS_CKM.3 FIA_UAU.1 N/A N/A FIA_UID.1 N/A N/A FIA_AFL.1/RAD Fully FIA_AFL.1/PIN for the PIN FIA_AFL.1/PIN_BIO for the Biometric template FIA_AFL.1/Auth keys Partially FIA_AFL.1/CM for the authentication of the roles Personalisation Agent and TOE_Administrator FIA_API.1 N/A N/A FMT_SMR.1 N/A N/A FMT_SMF.1 Partially FCS_CKM.3 for the use of the cryptographic keys FMT_MOF.1 N/A N/A FMT_MSA.1/Admin N/A N/A FMT_MSA.1/Signatory N/A N/A FMT_MSA.1/Key management N/A N/A FMT_MSA.1/TOE management N/A N/A FMT_MSA.2 Partially FDP_RIP.1/TRANSIENT ensures the security attributes stored in ephemeral memory (transient) are reset to restrictive default value after card reset.The following security attributes are concerned: -SCD/SVD management -SCD operational -Key management FMT_MSA.3 Partially FDP_RIP.1/TRANSIENT ensures the security attributes stored in ephemeral memory (transient) are reset to restrictive default value after card reset.The following security attributes are concerned: -SCD/SVD management -SCD operational -Key management FMT_MSA.4 N/A N/A FMT_MTD.1/Admin N/A N/A FMT_MTD.1/Signatory Partially FMT_MTD.1/PIN for the PIN change featureFMT_MTD.1/PIN_BIO for the Biometric template change feature FMT_MTD.1/Unblock Partially FMT_MTD.1/PIN for the PIN unblocking feature FMT_MTD.1/PIN_BIO for the Biometric template unblocking feature FMT_MTD.1/SCD and SCD ID N/A N/A 127/128 FMT_MTD.1/TOE Serial Number N/A N/A FMT_MTD.1/TOE State N/A N/A FPT_EMS.1 Fully FPR_UNO.1 for the PIN and Biometric management FPR_UNO.1/Key_CM for the import/update of the authentication keys of the Personalisation Agent and TOE_Administrator FPR_UNO.1/USE_KEY when using the authentication keys of the Personalisation Agent and TOE_Administrator FPR_UNO.1/Applet when comparing two bytes arrays FPT_FLS.1 Partially FDP_ROL.1/FIREWALL ensures the TOE returns in a safe state in case an error occurs in an atomic transation FAU_ARP.1 ensures security actions are taken upon security violations and that the TOE returns in a safe state FPT_FLS.1 FPT_FLS.1/ADEL FPT_FLS.1/ODEL FPT_FLS.1/SCP FPT_RCV.3/SCP ensures automated recovery in the secure initial state FPT_RCV.4/SCP ensures a secure state in case of power loss during a reading/writing FPT_PHP.1 Fully FPT_PHP.3/SCP FPT_PHP.3 Fully FPT_PHP.3/SCP FPT_TST.1 Partially FPT_TST.1 FDP_SDI.2 for the integrity of patch and javacard packages. Any loss of integrity is detected FTP_ITC.1/SCD Partially FTP_ITC.1/CM FTP_ITC.1/SVD Partially FTP_ITC.1/CM FTP_ITC.1/VAD N/A N/A FTP_ITC.1/DTBS N/A N/A Coverage of the composite ST threats by the platform threats TOE threat composite ST threat Platform threat covering the Composite ST threat T.SCD_Divulg YES This threat addresses the disclosure of the SCD during its generation or import which is covered by the applet but also by collecting information after its destruction, during storage or use which is directed against the platform and meet T.CONFID_APPLI_DATA, T.RESSOURCES, T.OBJ_DELETION, and T.PHYSICAL T.SCD_Derive YES This threat addresses the derivation of the SCD from the SVD, the signature or any other publicly known data. A part of this threat involves the integrity of the SCD and is addressed against the platform. It meets T.INTEG_APPLI_DATA 128/128 T.Hack_Phys YES This threat is mainly addressed against the platform and a large part is covered by T.PHYSICAL. The following threats of the platform also cover it T.RESSOURCES, T.OBJ_DELETION, T.CONFID_APPLI_DATA and T.INTEG_APPLI_DATA T.SVD_Forgery YES This threat addresses the forgery of the SVD. When the applet is responsible of its integrity while transporting it, the platform is responsible of its integrity inside the container. The platform threat for this problem is T.INTEG_APPLI_DATA T.SigF_Misuse NO The platform is not involved in the protection of the TOE against this threat T.DTBS_Forgery NO The applet ensures the integrity of the DTBS. T.Sig_Forgery YES This threat addresses the forgery of the signature created by the TOE. A part of it is covered by the platform threat T.INTEG_APPLI_DATA (against SCD integrity) T.Key_Divulg YES This threat addresses the disclosure of the authentication and eServices keys when transporting them which is covered by the applet but also by collecting information after their destruction, during storage or use which is directed against the platform and meet T.CONFID_APPLI_DATA, T.RESSOURCES, T.OBJ_DELETION, and T.PHYSICAL T.Key_Derive YES This threat addresses the derivation of the authentication and eServices keys from the public keys, the authentication cryptogram or any other publicly known data. A part of this threat is under the responsibility of the platform and meets T.INTEG_APPLI_DATA (against keys storage and destruction) T.TOE_PublicAuthKey_Forgery NO This threat is covered by the applet T.Authentication_Replay YES This threat is mainly covered by the applet but the part addressed against the platform meets T.INTEG_APPLI_DATA (against storage and destruction of keys used for the authentications)