Lexmark Multi-Function Printers with TPM, Fax and Hard Drive Security Target Version 1.19 May 18, 2023 Lexmark International, Inc. 740 New Circle Road Lexington, KY 40550 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 2 DOCUMENT INTRODUCTION Prepared By: Common Criteria Consulting LLC 10346 Royal Woods Ct Montgomery Village, MD 20886 http://www.consulting-cc.com Prepared For: Lexmark International, Inc. 740 New Circle Road Lexington, KY 40550 http://www.lexmark.com Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 3 TABLE OF CONTENTS 1. SECURITY TARGET INTRODUCTION................................................................. 9 1.1 Security Target Reference.......................................................................................... 9 1.2 TOE Reference............................................................................................................ 9 1.3 Keywords ................................................................................................................... 11 1.4 TOE Overview........................................................................................................... 11 1.4.1 Usage and Major Security Features......................................................................... 11 1.4.2 TOE type.................................................................................................................. 13 1.4.3 Required Non-TOE Hardware/Software/Firmware................................................. 14 1.5 TOE Description ....................................................................................................... 14 1.5.1 Physical Boundary ................................................................................................... 15 1.5.2 Logical Boundary..................................................................................................... 17 1.6 TOE Data................................................................................................................... 18 1.6.1 TSF Data.................................................................................................................. 18 1.7 Evaluated Configuration.......................................................................................... 20 1.8 Functionality Supported But Not Evaluated.......................................................... 22 2. CONFORMANCE CLAIMS ..................................................................................... 24 2.1 Common Criteria Conformance.............................................................................. 24 2.2 Protection Profile Conformance.............................................................................. 24 3. SECURITY PROBLEM DEFINITION ................................................................... 25 3.1 Users........................................................................................................................... 25 3.2 Assets.......................................................................................................................... 25 3.3 Threats ....................................................................................................................... 26 3.3.1 Unauthorized Access to User Data .......................................................................... 27 3.3.2 Unauthorized Access to TSF Data........................................................................... 27 3.3.3 Network Communication Attacks............................................................................ 27 3.3.4 Malfunction.............................................................................................................. 27 3.4 Organizational Security Policies.............................................................................. 28 3.4.1 User Authorization................................................................................................... 28 3.4.2 Auditing ................................................................................................................... 28 3.4.3 Protected Communications ...................................................................................... 28 3.4.4 Storage Encryption................................................................................................... 28 3.4.5 PSTN Fax-Network Separation ............................................................................... 29 3.4.6 Image Overwrite ...................................................................................................... 29 3.4.7 Purge Data................................................................................................................ 29 3.5 Assumptions............................................................................................................... 29 3.5.1 Physical Security...................................................................................................... 30 3.5.2 Network Security ..................................................................................................... 30 3.5.3 Administrator Trust.................................................................................................. 30 3.5.4 User Training ........................................................................................................... 30 4. SECURITY OBJECTIVES........................................................................................ 31 4.1 Security Objectives for the TOE.............................................................................. 31 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 4 4.1.1 User Authorization................................................................................................... 31 4.1.2 User Identification and Authentication.................................................................... 31 4.1.3 Access Control......................................................................................................... 32 4.1.4 Administrator Roles ................................................................................................. 32 4.1.5 Software Update Verification .................................................................................. 32 4.1.6 Self-test .................................................................................................................... 33 4.1.7 Communications Protection..................................................................................... 33 4.1.8 Auditing ................................................................................................................... 33 4.1.9 Storage Encryption (conditionally mandatory)........................................................ 33 4.1.10 Protection of Key Material (conditionally mandatory).......................................... 34 4.1.11 PSTN Fax-Network Separation (conditionally mandatory)................................... 34 4.1.12 Image Overwrite (optional).................................................................................... 34 4.1.13 Purge Data (optional)............................................................................................. 34 4.2 Security Objectives for the Operational Environment.......................................... 35 4.2.1 Physical Protection................................................................................................... 35 4.2.2 Network Protection .................................................................................................. 35 4.2.3 Trusted Administrators ............................................................................................ 35 4.2.4 Trained Users ........................................................................................................... 35 4.2.5 Trained Administrators ............................................................................................ 36 4.3 Security Objectives Rationale.................................................................................. 36 5. EXTENDED COMPONENTS DEFINITION ......................................................... 40 5.1 Extended SFR Component Definitions ................................................................... 40 5.1.1 FAU_STG_EXT Extended: External Audit Trail Storage.................................... 40 5.1.2 FCS_CKM_EXT Extended: Cryptographic Key Management ............................ 41 5.1.3 FCS_IPSEC_EXT Extended: IPsec selected......................................................... 42 5.1.4 FCS_KYC_EXT Extended: Cryptographic Operation (Key Chaining) ............... 44 5.1.5 FCS_RBG_EXT Extended: Cryptographic Operation (Random Bit Generation) .. 46 5.1.6 FDP_DSK_EXT Extended: Protection of Data on Disk....................................... 47 5.1.7 FDP_FXS_EXT Extended: Fax Separation ......................................................... 48 5.1.8 FIA_PMG_EXT Extended: Password Management............................................ 49 5.1.9 FIA_PSK_EXT Extended: Pre-Shared Key Composition .................................... 51 5.1.10 FPT_KYP_EXT Extended: Protection of Key and Key Material....................... 52 5.1.11 FPT_SKP_EXT Extended: Protection of TSF Data............................................ 53 5.1.12 FPT_TST_EXT Extended: TSF testing ............................................................. 54 5.1.13 FPT_TUD_EXT Extended: Trusted Update ...................................................... 55 6. SECURITY REQUIREMENTS................................................................................ 57 6.1 TOE Security Functional Requirements ................................................................ 57 6.1.1 Security Audit (FAU) .............................................................................................. 58 6.1.2 Cryptographic Support (FCS).................................................................................. 61 6.1.3 User Data Protection (FDP)..................................................................................... 68 6.1.4 Identification and Authentication (FIA)................................................................... 73 6.1.5 Security Management (FMT)................................................................................... 76 6.1.6 Protection of the TSF (FPT)..................................................................................... 81 6.1.7 TOE Access (FTA) .................................................................................................. 82 6.1.8 Trusted Paths/Channels (FTP) ................................................................................. 83 6.2 Security Assurance Requirements........................................................................... 84 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 5 7. TOE SUMMARY SPECIFICATION....................................................................... 86 7.1 Security Functions .................................................................................................... 86 7.1.1 Identification, Authentication and Authorization .................................................... 86 7.1.2 Access Control......................................................................................................... 91 7.1.3 Data Encryption ....................................................................................................... 93 7.1.4 Trusted Communications......................................................................................... 94 7.1.5 Administrative Roles ............................................................................................... 96 7.1.6 Auditing ................................................................................................................... 97 7.1.7 Trusted Operation .................................................................................................... 99 7.1.8 PSTN Fax-Network Separation ............................................................................. 100 7.1.9 Data Clearing and Purging..................................................................................... 100 7.1.10 Common Functionality Regarding Key Destruction in Flash Memory............... 101 7.1.11 CAVP Certificates ............................................................................................... 101 8. RATIONALE ............................................................................................................ 103 8.1 Security Requirements Rationale.......................................................................... 103 8.1.1 Rationale for Security Functional Requirements of the TOE Objectives.............. 103 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 6 LIST OF TABLES Table 1 - MFP TOE Configurations............................................................................... 9 Table 2 - User Categories............................................................................................. 12 Table 3 - Asset categories ............................................................................................ 12 Table 4 - User Data types............................................................................................. 13 Table 5 - TSF Data types.............................................................................................. 13 Table 6 - Technical Characteristics of the MFP Models.............................................. 15 Table 7 - TSF Data....................................................................................................... 18 Table 8 - Source-Destination Combinations ................................................................ 22 Table 9 - Technical Decision Applicability ................................................................. 24 Table 10 - Security Objectives rationale.................................................................... 36 Table 11 - TOE Security Functional Requirements ................................................... 57 Table 12 - Auditable Events....................................................................................... 59 Table 13 - D.USER.DOC Access Control SFP.......................................................... 69 Table 14 - D.USER.JOB Access Control SFP........................................................... 71 Table 15 - Management of TSF Data......................................................................... 78 Table 16 - TOE Assurance Components Summary ................................................... 85 Table 17 - Permissions ............................................................................................... 88 Table 18 - Identification, Authentication and Authorization SFR Details................. 90 Table 19 - TOE User Function Access Control ......................................................... 91 Table 20 - User Functions Access Control SFR Details ............................................ 92 Table 21 - Data Encryption SFR Details.................................................................... 93 Table 22 - Trusted Communications SFR Details...................................................... 95 Table 23 - NIST SP800-56B Conformance ............................................................... 95 Table 24 - Function Correspondence to Permissions................................................. 96 Table 25 - Administrative Roles SFR Details............................................................ 97 Table 26 - Auditing SFR Details................................................................................ 99 Table 27 - Trusted Operation SFR Details............................................................... 100 Table 28 - PSTN Fax-Network Separation SFR Details.......................................... 100 Table 29 - Data Clearing and Purging SFR Details ................................................. 101 Table 30 - CAVP Certificates .................................................................................. 102 Table 31 - Security Functional Requirements Rationale.......................................... 103 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 7 ACRONYMS and ABREVIATIONS LIST AD..........................................................................................................................Active Directory AES..............................................................................................Advanced Encryption Standard BSD...............................................................................................Berkeley Software Distribution CAVP .................................................................Cryptographic Algorithm Validation Program CBC........................................................................................................... Cipher Block Chaining CC....................................................................................................................... Common Criteria CM..................................................................................................... Configuration Management CTR_DRBG................................................................................................ Counter Mode DRBG DLE ........................................................................................................Downloadable Emulators DRBG................................................................................ Deterministic Random Bit Generator EAL ................................................................................................... Evaluation Assurance Level ESP ..............................................................................................Encapsulating Security Payload FAC .........................................................................................................Function Access Control FTP..............................................................................................................File Transfer Protocol GB......................................................................................................................................GigaByte GCM............................................................................................................Galois Counter Model GSSAPI............................................Generic Security Services Application Program Interface GUI......................................................................................................... Graphical User Interface HTTP...............................................................................................HyperText Transfer Protocol I&A..............................................................................................Identification & Authentication IEC ............................................................................ International Electrotechnical Commision IP ..........................................................................................................................Internet Protocol IPP........................................................................................................ Internet Printing Protocol IPSec..................................................................................................... Internet Protocol Security ISO...................................................................................... International Standards Orgaization IT ............................................................................................................. Information Technology KAT................................................................................................................Known Answer Test KDC......................................................................................................... Key Distribution Center KMD...............................................................................................Key Management Description LAN................................................................................................................ Local Area Network LDAP............................................................................... Lightweight Directory Access Protocol MB....................................................................................................................................MegaByte MFD .............................................................................................................Multi-Finction Device MFP........................................................................................................... Multi-Function Printer NIAP..................................................................... National Information Assurance Partnership NAND................................................................................................................................. Not And NTP ...........................................................................................................Network Time Protocol OSP................................................................................................Organizational Security Policy PIV.................................................................................................. Personal Identity Verification PJL .............................................................................................................. Printer Job Language P/N.............................................................................................................................. Part Number PP.........................................................................................................................Protection Profile PSK.........................................................................................................................Pre-Shared Key PSTN ...................................................................................Public Switched Telephone Network RBG........................................................................................................... Random Bit Generator RFC ...........................................................................................................Request For Comments SFP ..........................................................................................................Security Function Policy Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 8 SFR...........................................................................................Security Functional Requirement SHA ...........................................................................................................Secure Hash Algorithm SP...................................................................................................................... Special Publication ST............................................................................................................................ Security Target TD......................................................................................................................Technical Decision TOE............................................................................................................... Target of Evaluation TPM.......................................................................................................Trusted Platform Module TRNG......................................................................................True Random Number Generator TSF ............................................................................................................TOE Security Function UI.............................................................................................................................. User Interface USB.................................................................................................................Universal Serial Bus Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 9 1. Security Target Introduction This Security Target (ST) describes the objectives, requirements, and rationale for the Lexmark Multi-Function Printers with TPM, Fax, and Hard Drive TOE. The language used in this Security Target is consistent with the Common Criteria for Information Technology Security Evaluation, Version 3.1 Revision 5. As such, the spelling of terms is presented using the internationally accepted English. 1.1 Security Target Reference Lexmark Multi-Function Printers with TPM, Fax, and Hard Drive Security Target, Version 1.19, May 18, 2023. 1.2 TOE Reference The TOE includes 19 Lexmark MFPs. Each of the MFPs in the TOE include a Trusted Platform Module (TPM), fax capability, and a hard disk drive. The components that provide the TPM, fax, and hard drive are included in some of the printer models (standard) and are optional components that must be ordered and installed for other models. The MFPs included in this evaluation fall into one of three categories: 1. Fax and hard drive standard, TPM optional; 2, TPM and fax standard, hard drive optional; and 3. TPM standard, fax and hard drive optional. The following defines the TOE: Lexmark MX432, MX522, MX622, MX721, MX722, MX822, MX826, MX931, CX622, CX625, CX730, CX735, CX820, CX825, CX860, CX930, CX931, CX942, CX943, and CX944 Multi-Function Printers with Trusted Platform Module, Fax and Hard Drive with Firmware Version 081.234. The Lexmark printers are sold in predefined configurations, providing groupings of added options such as duplex printing, analog fax, and hard drive. The configurations are identified by a character string appended to the model number. The following table provides details of the models and their configurations that are included in the evaluation. Table 1 - MFP TOE Configurations Build Models Included in the Evaluation Model Reference TPM Standard or P/N 57x0195 (optional component installed) Fax Standard or P/N 37x6350 (optional component installed) Hard Disk Standard or P/N 27x0400 (optional component installed) MXTCT MX432adwe MX432 Standard Standard P/N 27x0400 MXTGM MX522adhe MX522 P/N 57x0195 Standard Standard MX622adhe MX622 P/N 57x0195 Standard Standard MX721adhe MX721 P/N 57x0195 Standard Standard MX722adhe MX722 P/N 57x0195 Standard Standard MX822ade MX822 P/N 57x0195 Standard Standard MX822adxe P/N 57x0195 Standard Standard Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 10 Build Models Included in the Evaluation Model Reference TPM Standard or P/N 57x0195 (optional component installed) Fax Standard or P/N 37x6350 (optional component installed) Hard Disk Standard or P/N 27x0400 (optional component installed) MX826ade MX826 P/N 57x0195 Standard Standard MX826adxe P/N 57x0195 Standard Standard MXTPM MX931dse MX931 Standard P/N 37x6350 P/N 27x0400 CXTZJ CX622adhe CX622 P/N 57x0195 Standard Standard CX625adhe CX625 P/N 57x0195 Standard Standard CXTMM CX730de CX730 Standard P/N 37x6350 P/N 27x0400 CX735adse CX735 Standard Standard P/N 27x0400 CXTPP CX820de CX820 P/N 57x0195 Standard Standard CX820dtfe P/N 57x0195 Standard Standard CX825de CX825 P/N 57x0195 Standard Standard CX825dte P/N 57x0195 Standard Standard CX825dtfe P/N 57x0195 Standard Standard CX860de CX860 P/N 57x0195 Standard Standard CX860dte P/N 57x0195 Standard Standard CX860dtfe P/N 57x0195 Standard Standard CXTPC CX930dse CX930 Standard P/N 37x6350 P/N 27x0400 CX931dse CX931 Standard P/N 37x6350 P/N 27x0400 CX931dtse Standard P/N 37x6350 P/N 27x0400 CX942adse CX942 Standard Standard P/N 27x0400 CX943adtse CX943 Standard Standard P/N 27x0400 CX943adxse Standard Standard P/N 27x0400 CX944adtse CX944 Standard Standard P/N 27x0400 CX944adxse Standard Standard P/N 27x0400 a=analog fax, d=duplex, e=e-task (touch screen device), f=staple finishing option, h=hard disk, m=mailbox, n=network, p=stable with hole punch finisher, s=stacker, t=additional tray included, v=vinyl, w=wireless, x=high- capacity feeder All of the Lexmark MFPs included in this evaluation incorporate an Infineon OPTIGA™ Trusted Platform Module SLB9672_2.0 (TPM). The TPM is a standard component in the Lexmark MX432, MX931, CX730, CX735, CX930, CX931, CX942, CX943, and CX944 models; the TPM is an optional component that must be ordered and installed in the Lexmark MX522, MX622, MX721, MX722, MX822, MX826, CX622, CX625, CX820, CX825, and CX860 models for the evaluated configuration. This TPM optional component in this document is referenced as Lexmark P/N 57x0195. All of the Lexmark MFPs included in this evaluation include fax capability. Fax is a standard component in the Lexmark MX432, MX522, MX622, MX721, MX722, MX822, MX826, CX622, CX625, CX735, CX820, CX825, CX860, CX942, CX943, and CX944 models; fax is an optional component that must be ordered and installed in the Lexmark MX931, CX730, CX930, and CX931 models for the evaluated configuration. This fax optional component in this document is referenced as Lexmark P/N 37x6350. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 11 All of the Lexmark MFPs included in this evaluation include a 500 GB hard disk drive. The hard disk is a standard component in the Lexmark MX522, MX622, MX721, MX722, MX822, MX826, CX622, CX625, CX820, CX825, and CX860 models; the hard disk is an optional component that must be ordered and installed in the Lexmark MX432, MX931, CX730, CX735, CX930, CX931, CX942, CX943, and CX944 models for the evaluated configuration. This hard disk optional component in this document is referenced as Lexmark P/N 27x0400. The firmware version of the TOE is build.081.234. Where build is one of the following: • MXTCT for MX432 • MXTGM for MX522 and MX622 • MXTGW for MX721, MX722, MX822, and MX826 • MXTPM for MX931 • CXTZJ for CX622 and CX625 • CXTMM for CX730 and CX735 • CXTPP for CX820, CX825, and CX860 • CXTPC for CX930, CX931, CX942, CX943, and CX944 The first letter in the build identifier is M for mono printers or C for color printers. The next two letters are always XT, signifying multi-function devices. The last two letters in the build identifier identify a specific processor used in the printer models. The functionality of all models is the same; the differences are limited to processors, paper sizes supported and device drivers. 1.3 Keywords Hardcopy, Paper, Document, Printer, Scanner, Copier, Facsimile, Fax, Document Server, Document Storage and Retrieval, Nonvolatile storage, Residual data, Temporary data, Disk overwrite, Network interface, Shared communications medium, Multifunction Device, Multifunction Product, All-In-One, MFD, MFP 1.4 TOE Overview 1.4.1 Usage and Major Security Features The MFPs are multi-functional printer systems with scanning, fax, and networked capabilities. Their capabilities extend to walk-up scanning and copying; scanning to fax; scanning to email; and servicing print jobs through the network. The MFPs feature an integrated touch-sensitive operator panel. All the Lexmark printer models included in this evaluation incorporate an Infineon OPTIGA™ Trusted Platform Module SLB9672_2.0 (TPM). The TPM provides a DRBG that is used to supply entropy to the Lexmark software DRBG. The TPM implements a NIST SP 800-90B CTR_DRBG and has been evaluated and included on certificate #4347. The major security features of the TOE are: 1. All Users are identified and authenticated as well as authorized before being granted permission to perform any restricted TOE functions. 2. Administrators authorize Users to use the functions of the TOE. 3. User Document Data are protected from unauthorized disclosure or alteration. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 12 4. TSF Data, of which unauthorized disclosure threatens operational security, are protected from unauthorized disclosure. 5. TSF Data, of which unauthorized alteration threatens operational security, are protected from unauthorized alteration. 6. Document processing and security-relevant system events are recorded, and such records are protected from disclosure to anyone except for authorized personnel. Records may not be altered. 1.4.1.1 User Definitions There are two categories of Users defined in this Security Target: Table 2 - User Categories Designation Category name Definition U.NORMAL Normal User A User who has been identified and authenticated and does not have an administrative role. A Normal User can be a Local User or a Network User. U.ADMIN Administrator A User who has been identified and authenticated and has an administrative role 1.4.1.2 Asset Definitions Assets are passive entities in the TOE that contain or receive information. Assets are Objects (as defined by the CC). There are two categories of Assets: Table 3 - Asset categories Designation Asset category Definition D.USER User Data Data created by and for Users that do not affect the operation of the TSF D.TSF TSF Data Data created by and for the TOE that might affect the operation of the TSF Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 13 1.4.1.3 User Data User Data are composed of two types: Table 4 - User Data types Designation User Data type Definition D.USER.DOC User Document Data Information contained in a User’s Document, in electronic or hardcopy form D.USER.JOB User Job Data Information related to a User’s Document or Document Processing Job 1.4.1.4 TSF Data TSF Data are composed of two types: Table 5 - TSF Data types Designation TSF Data type Definition D.TSF.PROT Protected TSF Data TSF Data for which alteration by a User who is neither the data owner nor in an Administrator role might affect the security of the TOE, but for which disclosure is acceptable D.TSF.CONF Confidential TSF Data TSF Data for which either disclosure or alteration by a User who is neither the data owner nor in an Administrator role might affect the security of the TOE 1.4.2 TOE type Multi-Function Device Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 14 1.4.3 Required Non-TOE Hardware/Software/Firmware To be fully operational, the following items may be connected to the MFP: 1. A LAN for network connectivity. The TOE supports IPv4 and IPv6. 2. An IT system acting as the remote syslog recipient of audit event records sent from the TOE. 3. IT systems that submit print jobs to the MFP via the network using standard print protocols. 4. An IT system that connects remotely to the printer to perform remote configuration. Remote configuration is optional. 5. An LDAP server to support Identification and Authentication (I&A). This component is optional depending on the type(s) of I&A mechanisms used. 6. A card reader and cards to support Personal Identity Verification (PIV) cards. This component is optional depending on the type(s) of I&A mechanisms used. The supported card reader is the Identiv uTrust 2700 F Contact Smart Card Reader. 7. A Network Time Protocol Server. This system is optional based on if the time source is configured locally or remotely. 8. A Key Distribution Center (KDC). This system is optional and required only if smart card authentication is selected. 9. An email server to receive outgoing emails from the printers. This system is optional and required only if email output is configured. 10. A phone line and a fax machine to receive outgoing faxes from the printers and receive incoming faxes. This system is optional and required only if fax capability is configured. 1.5 TOE Description The TOE provides the following functions related to MFPs: 1. Printing 2. Scanning 3. Copying 4. PSTN Faxing 5. Network Communication 6. Administration 7. Internal Audit Log Storage 8. Image Overwrite 9. Purge Data All of the MFP models included in this evaluation provide the same security functionality. There are no security-relevant differences between the models included in the evaluation. Their differences are limited to minor differences in processors, color or black & white printing, paper Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 15 size supported and the speed of printing. The following table summarizes the technical characteristics of the MFP models. Table 6 - Technical Characteristics of the MFP Models Model Processor Word Size Color/Mono Pages Per Minute MX432 Marvell 88PA6270 (G2) 64-bit Mono 42 MX522 Marvell 88PA6270 (G2) 32-bit Mono 46 MX622 Marvell 88PA6270 (G2) 32-bit Mono 50 MX721 Marvell 88PA6270 (G2) 64-bit Mono 65 MX722 Marvell 88PA6270 (G2) 64-bit Mono 70 MX822 Marvell 88PA6270 (G2) 64-bit Mono 55 MX826 Marvell 88PA6270 (G2) 64-bit Mono 70 MX931 Marvell 88PA6270 (G2) 64-bit Mono 35 CX622 Marvell 88PA6270 (G2) 64-bit Color 40 CX625 Marvell 88PA6270 (G2) 64-bit Color 40 CX730 Marvell 88PA6270 (G2) 64-bit Color 42 CX735 Marvell 88PA6270 (G2) 64-bit Color 52 CX820 Marvell MV78460 (A) 32-bit Color 52 CX825 Marvell MV78460 (A) 32-bit Color 52 CX860 Marvell MV78460 (A) 32-bit Color 60 CX930 Marvell 88PA6270 (G2) 64-bit Color 25 CX931 Marvell 88PA6270 (G2) 64-bit Color 35 CX942 Marvell 88PA6270 (G2) 64-bit Color 45 CX943 Marvell 88PA6270 (G2) 64-bit Color 55 CX944 Marvell 88PA6270 (G2) 64-bit Color 65 1.5.1 Physical Boundary The physical boundary of the TOE is the MFPs with the Lexmark TPM (P/N 57x0195) installed in Lexmark MX522, MX622, MX721, MX722, MX822, MX826, CX622, CX625, CX820, CX825, and CX860 models; the Lexmark Fax component (P/N 37x6350) installed in Lexmark MX931, CX730, CX930, and CX931 models; and the Lexmark Hard Disk Drive (P/N 27x0400) installed in Lexmark MX432, MX931, CX730, CX735, CX930, CX931, CX942, CX943, and CX944 models. The optional components may be installed at the factory or by the customer. Installation depends on how the components are ordered (individually or as a predefined configuration). Installation instructions are included with the component when shipped to the customer. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 16 Figure 1 - Representative TOE Deployment The physical scope of the TOE also includes the following guidance documentation: 1. Lexmark Common Criteria Installation Supplement and Administrator Guide, December 2022. 2. Lexmark Embedded Web Server – Security Administrator's Guide, May 2022. 3. Lexmark MX432, XM3142 MFPs User’s Guide, October 2022 4. Lexmark CX421, CX522, CX622, CX625, MC2325, MC2425, MC2535, MC2640, XC2235, XC4240 MFPs User's Guide, February 2021. 5. Lexmark CX730, CX735 XC4342, XC4352 MPFs User's Guide, February 2022. 6. Lexmark CX820, CX827, XC6152, XC6153 MFPs User's Guide, October 2020. 7. Lexmark CX825, CX860 XC8155, XC8160, XC8163 MFP User’s Guide, October 2020. 8. Lexmark CX930, CX931, XC9325, XC9335 MFPs User’s Guide, May 2020. 9. Lexmark CX942, CX943, CX944, XC9445, XC9455, XC9465, MFPs User’s Guide, May 2020. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 17 10. Lexmark MB2442, MB2546, MX421, MX521, MX522, XM1242, XM1246 MFPs User's Guide, February 2021. 11. Lexmark MB2650, MX622, XM3250 MFPs User's Guide, February 2021. 12. Lexmark MB2770, MX721, MX722, MX725, XM5365, XM5370 MFPs User's Guide, December 2018. 13. Lexmark MX822, MX826, XM7355, XM7370 MFPs User's Guide, February 2021. 14. Lexmark MX931 MFP User’s Guide, May 2022. 1.5.2 Logical Boundary The TOE supports the security functions documented in the following sections. 1.5.2.1 Identification, Authentication and Authorization When a touch panel or web session is initiated, the user is implicitly assumed to be the Guest (default) user. Per the evaluated configuration, the permissions for this user must be configured such that no access to TSF data or functions is allowed other than print job submission (job submission is authorized regardless of what user is logged in). Therefore, the user must successfully log in as a different user before any TSF data or functions other than print job submission may be accessed. The TOE supports I&A with a per-user selection of Username/Password Accounts (processed by the TOE) or integration with an external LDAP server (in the operational environment) using GSSAPI/Kerberos. Smart Card authentication may also be specified for users of the touch panel. 1.5.2.2 Access Control Access controls configured for functions (e.g., fax usage) and menu access are enforced by the TOE. 1.5.2.3 Data Encryption All user data submitted to the TOE and stored on the hard disk is encrypted to protect its confidentiality in the event the hard drive was to be removed from the MFP. The TOE protects the confidentiality and integrity of all information exchanged over the attached network by using IPSec with ESP for all network communication. 1.5.2.4 Trusted Communications The TOE ensures communication is performed with known endpoints by using IPSec with pre- shared keys or by validating supplied certificates. 1.5.2.5 Administrative Roles Through web browser and touch panel sessions, authorized administrators may configure access controls and perform other TOE management functions. 1.5.2.6 Auditing The TOE generates audit event records for security-relevant events. Audit records are stored internally and securely transmitted to a remote IT system using the syslog protocol over IPsec. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 18 1.5.2.7 Trusted Operation Software updates are verified to ensure the authenticity of the software before being applied. During initial start-up, the TOE performs self-tests on its cryptographic components and the integrity of the executable code. 1.5.2.8 PSTN Fax-Network Separation The TOE ensures that only fax traffic is sent or received via the attached phone line. Incoming traffic is processed as fax data only; no management access or other data access is permitted. In the evaluated configuration, the only source for outgoing faxes from the TOE is the scanner. 1.5.2.9 Data Clearing and Purging In the evaluated configuration, the TOE automatically overwrites disk blocks used to store user data as soon as the data is no longer required. 1.6 TOE Data 1.6.1 TSF Data Table 7 - TSF Data Item Description Account Status Login status information is associated with all accounts used to authenticate internally against a Username/Password. For each Username/Password account, the TOE tracks the number of login failures, time of the earliest login failure, and lock status. Active Directory Configuration Configuration information used to join an Active Directory Domain. Once joined, machine credentials are generated and the LDAP+GSSAPI Login Method parameters for communication with the Domain Controller are automatically populated. Analog Fax - Cancel Faxes Specifies whether pending faxes can be canceled by users. Analog Fax - Enable Fax Receive Specifies whether incoming faxes may be received. Analog Fax - Holding Faxes Defines conditions for holding incoming faxes. Date and Time Parameters Controls whether the time is tracked internally or from a remote NTP server. If an NTP server is used, it specifies the parameters for communication with the server. Disk Wiping - Automatic Method Specifies the method used for automatic disk wiping. Disk Wiping - Wiping Mode Controls the mode used for disk wiping. Enable Audit Determines if the device records events in the secure audit log and (if enabled) in the remote syslog. Enable Fax Scans Specifies whether users can create faxes with the device’s scanner. Enable HTTP Server Enables HTTP(S) server on the TOE. Enable Remote Syslog Determines if the device transmits logged events to a remote server. Fax Mode Specifies whether the fax function is operating in Analog mode or as a Fax Server (outgoing faxes are forwarded to a fax server via SMTP). Fax Server - Enable Analog Receive This parameter controls whether incoming faxes are supported when operating in fax server mode Fax Storage Location Specifies the storage location for faxes. This parameter must be set to “Disk” during installation and is not accessible to administrators during operation. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 19 Item Description Groups The set of Groups may be used to configure permissions for users. Each Group has a configured set of permissions. Users may belong to any number of Groups, and any User’s permissions are the union of the permissions for each Group it is a member of. Held Print Job Expiration Timer Specifies the amount of time a received print job is saved for a user to release before it is automatically deleted. IPSec Settings The configuration parameters for IPSec that require IPSec with ESP for all network communication (IPv4 and/or IPv6) with certificate validation or pre-shared keys. Job Waiting Specifies whether a print job may be placed in the Held Jobs queue if the required resources (e.g., paper type) are not currently available, enabling subsequent print jobs to be processed immediately Kerberos Setup Defines the KDC Address, KDC Port, and Realm for communication with the KDC. KDC communication is required if the TOE is using the LDAP+GSSAPI login mechanism. LDAP Certificate Required Specifies whether a valid certificate is required to be sent by an LDAP server. Yes specifies that the server certificate is requested; if no certificate is provided or if a bad certificate is provided, the session is terminated immediately. No indicates that a certificate is not required; if a certificate is supplied and it is invalid, the session is terminated immediately. LDAP+GSSAPI – MFP Credentials Specifies the Username and password to be used when performing LDAP queries. LDAP+GSSAPI Configuration Specifies the configuration options for communicating and exchanging information with an LDAP server using GSSAPI. LES Applications Specifies whether enhanced service Java applications may be executed on the TOE. This parameter must be set to “Enable” during installation and is not accessible to administrators during operation. Login Restrictions Determines how many failed authentications are allowed within the “Failure time frame” value before the offending Username/Password account is prevented from logging in for the duration of the “Lockout time” value. The “Web Login Timeout” determines how long the web sessions can remain idle before the user is logged off automatically. Network Port Defines the parameters required for the TOE to communicate via the standard network port Permissions Permissions specify the Function Access Control (FAC) authorizations, which grant access to menus or functions (e.g. Copy). Permissions are separately configurable for the default Guest account (Public) and for each defined Group. Users other than Guest inherent the union of permissions for all Groups that they are a member of. Remote Syslog Parameters Defines the communication to the remote syslog system Security Reset Jumper Specifies the behavior of the TOE when a position change of the Security Reset Jumper is detected. No Effect indicates the jumper should be ignored. “Enable Guest Access” changes the permissions for the Guest account to provide access to all functions and menus. Smart Card Authentication Client Configuration Specifies parameters for validating the certificate from the card and retrieving information from Active Directory. SMTP Setup Settings Define the SMTP server to be used to send email from the TOE SMTP Setup Settings - User- Initiated E-mail Specifies what credentials (if any) are used to authenticate with an external SMTP server. USB Buffer Disables all activity via the USB device ports (with the exception of a Smart Card reader if Smart Card usage is configured). Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 20 Item Description Username/Password Accounts Specify a list of accounts that are internally validated by username and password. For each account, a list of Group memberships are configured. Visible Home Screen Icons Specifies what icons should be displayed on the touch panel home screen. 1.7 Evaluated Configuration The following configuration options apply to the evaluated configuration of the TOE: 1. The B/W Print and Color Print permissions must be configured for the Public permissions, which apply to all users including the Guest user. These permissions authorize the MFP to accept print jobs from remote IT systems. No other permissions may be configured for the Public permissions. 2. No optional network interfaces are installed on the MFPs. Note that one physical LAN interface is standard on all MFPs and must be used. Wireless Ethernet must be disabled for the evaluated configuration. 3. No optional parallel or serial interfaces are installed on the MFPs. These are for legacy connections to specific IT systems only. 4. All USB ports on the MFPs that perform document processing functions (print, scan, fax send) are disabled via configuration. In the operational environments in which the Common Criteria evaluated configuration is of interest, the users typically require that all USB ports are disabled. If Smart Card authentication is used, the card reader is physically connected to a specific USB port during TOE installation; in the evaluated configuration this USB port is limited in functionality to acting as the interface to the card reader. A reader is shipped with the MFP. If Smart Card authentication is not used, the card reader may be left unconnected. 5. Operational management functions are performed via browser sessions to the embedded web server or via the management menus available through the touch panel. 6. Access controls are configured for all TSF data so that only authorized administrators are permitted to manage those parameters. 7. All network communication is required to use IPSec with ESP to protect the confidentiality and integrity of the information exchanged, including management sessions that exchange D.TSF.CONF and D.TSF.PROT. Certificates presented by remote IT systems are validated. 8. Because all network traffic is required to use IPSec with ESP, syslog records sent to a remote IT system also are protected by IPSec with ESP. 9. I&A may use Username/Password Accounts and/or the LDAP+GSSAPI login method on a per-user basis. Smart Card authentication may be used for touch panel users. No other I&A mechanisms are included in the evaluation because they provide significantly lower strength than the supported mechanisms. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 21 10. LDAP+GSSAPI and Smart Card authentication require integration with an external LDAP server such as Active Directory. This communication uses default certificates; the LDAP server must provide a valid certificate to the TOE. Binds to LDAP servers for LDAP+GSSAPI use device credentials (not anonymous bind) so that the information retrieved from Active Directory can be restricted to a specific MFP. Binds to LDAP servers for Smart Card authentication use user credentials from the card (not anonymous bind) so that the information retrieved from Active Directory can be restricted to a specific user. 11. Audit event records are transmitted to a remote IT system as they are generated using the syslog protocol. 12. The severity level of audit events to log must be set to 5 (Notice). 13. Disk wiping functionality is performed with a multi-pass method. 14. User data sent by the MFP in email messages is sent as an attachment (not as a web link). 15. No Java applications other than those stated in this section are loaded into the MFP by Administrators. These applications are referred to as eSF applications in end user documentation. If PIV smart card authentication is going to be used, the following eSF applications must be installed by an administrator during TOE installation and enabled: “Smart Card Authentication”, “Smart Card Authentication Client”, “PIV Smart Card Driver”, and “Background and Idle Screen”. 16. All other eSF applications installed by Lexmark before the TOE is shipped must be disabled. 17. No option card for downloadable emulators is installed in the TOE. 18. All fax jobs are stored on disk (rather than NAND) to ensure their contents are wiped upon completion of each job. Incoming faxes are always held until released by an authorized administrator. 19. Fax forwarding is disabled to limit the destinations for incoming faxes to the local printer only. 20. NPAP, PJL and Postscript have the ability to modify system settings. The capabilities specific to modifying system settings via these protocols are disabled. 21. All administrators must be authorized for all of the document processing functions (print, copy, scan, fax). 22. All network print jobs are held until released via the touch panel. Every network print job must include a PJL SET USERNAME statement to identify the userid of the owner of the print job. Held print jobs may only be released by an authenticated user with the same userid as specified in the print job. 23. All incoming fax jobs are held until released via the touch panel. Held fax jobs may only be released by an authenticated user with the U.ADMIN role.* 24. Administrators are directed (through operational guidance) to specify passwords adhering to the following composition rules for Username/Password Accounts: Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 22  A minimum of 8 characters (note that the minimum size is configurable and can be set to a minimum of 15 characters)  At least one lower case letter, one upper case letter, and one non-alphabetic character  No dictionary words or permutations of the username 25. Simple Network Management Protocol (SNMP) support is disabled. 26. Internet Printing Protocol (IPP) support is disabled. 27. The Use Intelligent Storage Drive parameter is disabled. 28. All unnecessary network ports are disabled. 29. The only supported Diffie-Hellman group for IKE is Group 14 (2048-bit MODP). 30. The hard drives are only designed to be removed by authorized Lexmark service personnel, and only upon failure of the hard drive as part of a replacement operation to bring the TOE back into operational status. Under no circumstances are hard drives reinserted into the same or a different printer after removal. The following table defines the combinations of possible input sources and destinations that are included in the evaluated configuration. In the table, the following meanings are used:  “May Be Disabled Or Restricted” indicates that the functionality is included in the evaluation but may be disabled or restricted to an authorized set of users at the discretion of an administrator  “Disabled” indicates the functionality exists within the TOE but is always disabled by an administrator for the evaluated configuration  “n/a” indicates the functionality does not exist in the TOE Table 8 - Source-Destination Combinations Source Destination Print Protocols (via the Network Interface) Scanner Incoming Fax Printer May Be Disabled Or Restricted May Be Disabled Or Restricted May Be Disabled Or Restricted Outgoing Fax Disabled May Be Disabled Or Restricted Disabled Email (via the Network Interface) n/a May Be Disabled Or Restricted Disabled FTP (via the Network Interface) n/a Disabled Disabled 1.8 Functionality Supported But Not Evaluated The following functionality is supported in the product but is not included in the evaluation. 1. In addition to Personal Identity Verification (PIV) cards, Common Access Card (CAC) and Secret Internet Protocol Router Network (SIPRNet) cards are also supported. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 23 2. In addition to the Identiv uTrust 2700 F Contact Smart Card Reader, the following card readers are also supported: a. Identiv uTrust 2700 R Contact Smart Card Reader, b. Omnikey 3121 SmartCard Reader, c. Any other Omnikey SmartCard Readers that share the same USB Vendor IDs and Product IDs with the Omnikey 3121 (example Omnikey 3021), d. SCM SCR 331, e. SCM SCR 3310v2. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 24 2. Conformance Claims 2.1 Common Criteria Conformance Common Criteria version: Version 3.1 Revision 5 Common Criteria conformance: Part 2 extended and Part 3 conformant 2.2 Protection Profile Conformance This Security Target claims exact conformance to the Protection Profile for Hardcopy Devices [HCD], version 1.0, dated September 10, 2015, as modified by Errata #1 dated June 2017. The following table states whether each of the NIAP Technical Decisions (TDs) issued to date that are applicable to [HCD] are applicable to this TOE. Table 9 - Technical Decision Applicability TD Applicable Exclusion Rationale TD0157 - FCS_IPSEC_EXT.1.1 - Testing SPDs Yes TD0176: FDP_DSK_EXT.1.2 - SED Testing Yes TD0219 - NIAP Endorsement of Errata for HCD PP v1.0 Yes TD0253: Assurance Activities for Key Transport No The TD is associated with FCS_COP.1(i). The TOE does not include FCS_COP.1(i) functionality. TD0261 - Destruction of CSPs in flash Yes TD0299: Update to FCS_CKM.4 Assurance Activities Yes TD0393 - Require FTP_TRP.1(b) only for printing Yes TD0474 - Removal of Mandatory Cipher Suite in FCS_TLS_EXT.1 No The TD is associated with FCS_TLS_EXT.1. The TOE does not include FCS_TLS_EXT.1 functionality. TD0494 - Removal of Mandatory SSH Ciphersuite for HCD No The TD is associated with FCS_SSH_EXT.1. The TOE does not include FCS_SSH_EXT.1 functionality. TD0562 – Test activity for Public Key Algorithms No The TD is associated with FCS_SSH_EXT.1. The TOE does not include FCS_SSH_EXT.1 functionality. TD0642 – FCS_CKM.1(a) Requirement; P384 keysize moved to selection. No The TOE does not claim elliptic curve digital signature. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 25 3. Security Problem Definition The following Security Problem Definition is reproduced from [HCD]. Note that paragraph numbering shown in this chapter corresponds to paragraph numbers in [HCD]. The Security Problem Definition (SPD) is divided into two parts. This firstpart describes Assets, Threats, and Organizational Security Policies, in narrative form. [Brackets] indicate a reference to the second part, formal definitions of Users, Assets, Threats, Organizational Security Policies, and Assumptions, which appear in Appendix A of [HCD]. Note: From this point in the document, the Target of Evaluation will be referred to by the acronym “TOE” (Target of Evaluation) instead of by the product category “HCD” (Hardcopy Device). 3.1 Users A conforming TOE must define at least the following two User roles: 1. Normal Users [U.NORMAL] who are identified and authenticated and do not have an administrative role. 2. Administrators [U.ADMIN] who are identified and authenticated and have an administrative role. A conforming TOE may allow additional roles, sub-roles, or groups. In particular, a conforming TOE may allow several administrative roles that have authority to administer different aspects of the TOE. Note that a User can be a human user or an external IT entity. Additional details about Users are in Appendix A.1 of [HCD]. 3.2 Assets From a User’s perspective, the primary Asset to be protected in a TOE is User Document Data [D.USER.DOC]. A User’s job instructions, User Job Data [D.USER.JOB] (information related to a User’s Document or Document Processing Job), may also be protected if their compromise impacts the protection of User Document Data. Together, User Document Data and User Job Data are considered to be User Data. As an illustrative example, data sent by a Network User for printing contains a User’s Document [D.USER.DOC] which must not be accessed by anyone else, Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 26 and job instructions such as the destination to send scanned Documents [D.USER.JOB] which must not be altered by anyone else. From an Administrator’s perspective, the primary Asset to be protected in a TOE is data that is used to configure and monitor the secure operation of the TOE. This kind of data is considered to be TOE Security Functionality (TSF) Data. There are two broad categories for this kind of data: 1. Protected TSF Data, which may be read by any User but must be protected from unauthorized modification and deletion [D.TSF.PROT]; and, 2. Confidential TSF Data, which may neither be read nor modified or deleted except by authorized Users [D.TSF.CONF]. An illustrative example is data that is used by the TOE to identify and authenticate authorized Users. Typically, a username that is used for identification may be read by anyone but must be protected from unauthorized modification and deletion [D.TSF.PROT]. In contrast, a User’s password that is used for authentication must be confidential, prohibiting any Unauthorized Access [D.TSF.CONF]. If TSF Data is compromised, it can be used for a variety of malicious purposes that include elevation of privileges, accessing stored Documents, redirecting the destination of processed Documents, masquerading as an authorized User or Administrator, altering the operating software of the TOE, and attacking External IT Entities. In a conforming TOE, TSF Data is clearly identified and categorized as either Protected TSF Data or Confidential TSF Data. From a network security perspective, it is important to ensure the secure operation of the TOE and other IT entities in its Operational Environment. Since the Operational Environment is outside of the TOE, Organizational Security Policies are employed to address protection of the Operational Environment. Additional details about assets are in Appendix A.2 of [HCD]. 3.3 Threats The following are Threats against the TOE that are countered by conforming products. Additional details about threats are in Appendix A.3 of [HCD]. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 27 3.3.1 Unauthorized Access to User Data An attacker may access (read, modify, or delete) User Document Data or change (modify or delete) User Job Data in the TOE through one of the TOE’s interfaces [T.UNAUTHORIZED_ACCESS]. For example, depending on the design of the TOE, the attacker might access the printed output of a Network User’s print job, or modify the instructions for a job that is waiting in a queue, or read User Document Data that is in a User’s private or group storage area. 3.3.2 Unauthorized Access to TSF Data An attacker may gain Unauthorized Access to TSF Data in the TOE through one of the TOE’s interfaces [T.TSF_COMPROMISE]. For example, depending on the design of the TOE, the attacker might use Unauthorized Access to TSF Data to elevate their own privileges, alter an Address Book to redirect output to a different destination, or use the TOE’s Credentials to gain access to an external server. An attacker may cause the installation of unauthorized software on the TOE [T.UNAUTHORIZED_UPDATE]. For example, unauthorized software could be used to gain access to information that is processed by the TOE, or to attack other systems on the LAN. 3.3.3 Network Communication Attacks An attacker may access data in transit or otherwise compromise the security ofthe TOE by monitoring or manipulating network communication [T.NET_COMRPOMISE]. For example, here are several ways that network communications could be compromised: By monitoring clear-text communications on a wired LAN, the attacker might obtain User Document Data, User Credentials, or system Credentials, or hijack an interactive session. The attacker might record and replay a network communication session in order to log into the TOE as an authorized User to access Documents or as an authorized Administrator to change security settings. The attacker might masquerade as a trusted system on the LAN in order to receive outgoing scan jobs, to record the transmission of system Credentials, or to send malicious data to the TOE. 3.3.4 Malfunction A malfunction of the TSF may cause loss of security if the TOE is permitted to operate while in a degraded state [T.TSF_FAILURE]. Hardware or software malfunctions can produce unpredictable results, with a possibility that security functions will not operate correctly. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 28 3.4 Organizational Security Policies The following are Organizational Security Policies (OSPs) that areupheld by conforming products. Additional details about OSPs are in Appendix A.4 of [HCD]. 3.4.1 User Authorization Users must be authorized before performing Document Processing and administrative functions [P.AUTHORIZATION]. Authorization allows the TOE Owner to control who is able to use the resources of the TOE and who is permitted to perform administrative functions. 3.4.2 Auditing Security-relevant activities must be audited and the log of such actions must be protected and transmitted to an External IT Entity [P.AUDIT]. Stored on an External IT Entity (or, optionally, also in the TOE), an audit trail makes it possible for authorized personnel to review and identify suspicious activities and to account for TOE use as may be required by site policy or regulations. 3.4.3 Protected Communications The TOE must be able to identify itself to other devices on the LAN [P.COMMS_PROTECTION]. Assuring identification helps prevent an attacker from masquerading as the TOE in order to receive incoming print jobs, recording the transmission of User Credentials, or sending malicious data to External IT Entities. 3.4.4 Storage Encryption If the TOE stores User Document Data or Confidential TSF Dataon Field- Replaceable Nonvolatile Storage Devices, it will encrypt such data on those devices [P.STORAGE_ENCRYPTION]. Data is assumed to be protected by the TSF when the TOE is operating in its Operational Environment. However, if Field- Replaceable Nonvolatile Storage Devices are removed from the TOE for Servicing, redeployment to another environment, or decommissioning, an attacker may be able to expose or modify User Document Data or Confidential TSF Data. Encrypting such data prevents the attacker from doing so without access to encryption keys or keying material. Cleartext keys, submasks, random numbers, or any other values that contribute to the creation of encryption keys for Field-Replaceable Nonvolatile Storage of User Document Data or Confidential TSF Data must be protected from unauthorized Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 29 access and must not be stored on that storage device [P.KEY_MATERIAL]. Unauthorized possession of key material in cleartext may allow an attacker to decrypt User Document Data or Confidential TSF Data. 3.4.5 PSTN Fax-Network Separation If the TOE includes a PSTN fax function, it will ensure separation between the PSTN fax line and the LAN [P.FAX_FLOW]. The TOE is assumed to be in an Operational Environment that is protected, such as by an external firewall. However, the PSTN fax modem may be connected to a public switched telephone network. Ensuring separation of the PSTN fax and network prevents an attacker from using the PSTN fax modem to bypass the firewall or other external protection to access the protected environment. 3.4.6 Image Overwrite Upon completion or cancellation of a Document Processing job, the TOE shall overwrite residual image data from its Field-Replaceable Nonvolatile Storage Devices [P.IMAGE_OVERWRITE]. A customer may be concerned that image data that has been dereferenced by the TOE operating software may remain on Field- Replaceable Nonvolatile Storage Devices in the TOE after a Document Processing job has been completed or cancelled. Such customers desire that the image data be made unavailable by overwriting it with other data. 3.4.7 Purge Data The TOE shall provide a function that an authorized administrator can invoke to make all customer-supplied User Data and TSF Data permanently irretrievable from Nonvolatile Storage Devices [P.PURGE_DATA]. A customer may be concerned that data which is considered confidential in the Operational Environment may remain in Nonvolatile Storage Devices in the TOE after the TOE is permanently removed from its Operational Environment to be decommissioned from service or to be redeployed to a different Operational Environment. Such customers desire that all customer- supplied User Data and TSF Data be purged from the TOE so that it cannot be retrieved outside of the Operational Environment. 3.5 Assumptions The following assumptions must be upheld so that the objectives and requirements can effectively counter the threats described in this Protection Profile. Additional details about assumptions are in Appendix A.5 of [HCD]. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 30 3.5.1 Physical Security Physical security, commensurate with the value of the TOE and the data it stores or processes, is assumed to be provided by the environment [A.PHYSICAL]. The TOE is assumed to be located in a physical environment that is controlled or monitored such that a physical attack is prevented or detected. 3.5.2 Network Security The Operational Environment is assumed to protect the TOE from direct, public access to its LAN interface [A.NETWORK]. The TOE is not intended to withstand network-based attacks from an unmanaged network environment. 3.5.3 Administrator Trust TOE Administrators are trusted to administer the TOE according to site security policies [A.TRUSTED_ADMIN]. It is the responsibility of the TOE Owner to only authorize administrators who are trusted to configure and operate the TOE according to site policies and to not use their privileges for malicious purposes. 3.5.4 User Training Authorized Users are trained to use the TOE according to site security policies [A.TRAINED_USERS]. It is the responsibility of the TOE Owner to only authorize Users who are trained to use the TOE according to site policies. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 31 4. Security Objectives The following Security Objectives are reproduced from [HCD]. Note that paragraph numbering shown in this chapter corresponds to paragraph numbers in [HCD]. 4.1 Security Objectives for the TOE The following Security Objectives must be fulfilled by the TOE. Additional details about objectives for the TOE are in Appendices A.6 and A.7 of [HCD]. 4.1.1 User Authorization The TOE shall perform authorization of Users in accordance with security policies [O.USER_AUTHORIZATION]. This objective supports the policy that Users are authorized to administer the TOE or perform Document Processing functions that consume TOE resources. Users must be authorized to perform any of the Document Processing functions present in the TOE. The mechanism for authorization is implemented within the TOE, and it may also depend on a trusted External IT Entity. If a conforming TOE supports more than one mechanism, then each should be evaluated as separate modes of operation. In the case of printing (if that function is present in the TOE), User authorization may take place after the job has been submitted but must take place before printed output is made available to the User. Users must be authorized to perform PSTN fax sending functions and document storage and retrieval functions, if such functions are provided by the conforming TOE. Note that the TOE can receive a PSTN fax without any User authorization, but the received Document is subject to access controls. 4.1.2 User Identification and Authentication The TOE shall perform identification and authentication of Users for operations that require access control, User authorization, or Administrator roles [O.USER_I&A]. The mechanism for identification and authentication (I&A) is implemented within the TOE, and it may also depend on a trusted External IT Entity (e.g., LDAP, Kerberos, or Active Directory). If a conforming TOE supports more than one mechanism, then each should be evaluated as separate modes of operation. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 32 4.1.3 Access Control The TOE shall enforce access controls to protect User Data and TSF Data in accordance with security policies [O.ACCESS_CONTROL]. The guiding principles for access control security policies in this PP are:  User Document Data [D.USER.DOC] can be accessed only by the Document owner or an Administrator.  User Job Data [D.USER.JOB] can be read by any User but can be modified only by the Job Owner or an Administrator.  Protected TSF Data [D.TSF.PROT] are data that can be read by any User but can be modified only by an Administrator or (in certain cases) a Normal User who is the owner of or otherwise associated with that data.  Confidential TSF Data [D.TSF.CONF] are data that can only be accessed byan Administrator or (in certain cases) a Normal User who is the owner of or otherwise associated with that data. The Security Target of a conforming TOE must clearly specify its access control policies for User Data and TSF Data. 4.1.4 Administrator Roles The TOE shall ensure that only authorized Administrators are permitted to perform administrator functions [O.ADMIN_ROLES]. This objective addresses the need to have at least one Administrator role that is distinct from Normal Users. A conforming TOE may have specialized Administrator sub-roles, such as for device management, network management, or audit management. 4.1.5 Software Update Verification The TOE shall provide mechanisms to verify the authenticity of software updates [O.UPDATE_VERIFICATION]. This objective addresses the concern that malicious software may be introduced into the TOE as a software update. Verifying authenticity, such as with a digital signature or published hash, is required. Access control by itself does not satisfy this objective. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 33 4.1.6 Self-test The TOE shall test some subset of its security functionality to help ensure that subset is operating properly [O.TSF_SELF_TEST]. A malfunction of the TOE may compromise its security if the malfunction is not detected and the TOE is allowed to operate. Self-test is intended to detect such malfunctions. It is performed during power-up. 4.1.7 Communications Protection The TOE shall have the capability to protect LAN communications of User Data and TSF Data from Unauthorized Access, replay, and source/destination spoofing [O.COMMS_PROTECTION]. This objective addresses the common concerns of network communications:  Sensitive data or Credentials are obtained by monitoring LAN data outside of the TOE.  A successfully authenticated session is captured and replayed on the LAN, permitting the attacker to masquerade as the authenticated User.  Sensitive data or Credentials are obtained by redirecting communications from the TOE or from an External IT Entity to a malevolent destination. 4.1.8 Auditing The TOE shall generate audit data, and be capable of sending it to a trusted External IT Entity. Optionally, it may store audit data in the TOE [O.AUDIT]. The TOE must be able to send audit data to a trusted External IT Entity (e.g.,an audit server such as a syslog server). Audit data may also be stored in the TOE with appropriate access controls to ensure confidentiality and integrity. If a conforming TOE supports both mechanisms, then each should be evaluated as separate modes of operation. 4.1.9 Storage Encryption (conditionally mandatory) If the TOE stores User Document Data or Confidential TSF Data in Field- Replaceable Nonvolatile Storage devices, then the TOE shall encrypt such data on those devices. [O.STORAGE_ENCRYPTION]. This objective addresses the concern that User Document Data or Confidential TSF Data on a Field-Replaceable Nonvolatile Storage Device may be exposed if the device is removed from the TOE, such as for Servicing, Redeployment to another environment, or Decommissioning. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 34 4.1.10 Protection of Key Material (conditionally mandatory) The TOE shall protect from unauthorized access any cleartext keys, submasks, random numbers, or other values that contribute to the creation of encryption keys for storage of User Document Data or Confidential TSF Data in Field-Replaceable Nonvolatile Storage Devices; The TOE shall ensure that such key material is not stored in cleartext on the storage device that uses that material [O.KEY_MATERIAL]. This objective addresses the concern that unauthorized possession of keys or key material may be used to decrypt User Document Data or Confidential TSF Data. 4.1.11 PSTN Fax-Network Separation (conditionallymandatory) If the TOE provides a PSTN fax function, then the TOE shall ensure separation of the PSTN fax telephone line and the LAN, by system design or active security function [O.FAX_NET_SEPARATION]. This objective addresses customer concerns about having a telephone line connected to a device that is inside their firewall. Depending on implementation, it may be satisfied in different ways, such as by system architecture (no data path from the PSTN fax interface to the network interface), by system design (fax chipset recognizes only PSTN fax protocols), or by active security function (flow control). 4.1.12 Image Overwrite (optional) Upon completion or cancellation of a Document Processing job, the TOE shall overwrite residual image data in its Field-Replaceable Nonvolatile Storage Devices [O.IMAGE_OVERWRITE]. This objective addresses customer concerns that image data may remain on Field-Replaceable Nonvolatile Storage Devices in the TOE after a Document Processing job has been completed or cancelled. 4.1.13 Purge Data (optional) The TOE provides a function that an authorized administrator can invoke to make all customer-supplied User Data and TSF Data permanently irretrievable from Nonvolatile Storage Devices [O.PURGE_DATA]. This objective addresses customer concerns that data that is protected in the Operational Environment may remain in Nonvolatile Storage Devices after the TOE is permanently removed from its Operational Environment to be decommissioned from service or to be redeployed to a different Operational Environment. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 35 4.2 Security Objectives for the Operational Environment The following Security Objectives must be provided by the Operational Environment. Additional details about objectives for the Operational Environment are in Appendix A.7 of [HCD]. 4.2.1 Physical Protection The Operational Environment shall provide physical security, commensurate with the value of the TOE and the data it stores or processes [OE.PHYSICAL_PROTECTION]. Due to its intended function, this kind of TOE must be physically accessible to authorized Users, but it is not expected to be hardened against physical attacks. Therefore, the environment must provide an appropriate level of physical protection or monitoring to prevent physical attacks. 4.2.2 Network Protection The Operational Environment shall provide network security to protect the TOE from direct, public access to its LAN interface [OE.NETWORK_PROTECTION]. This kind of TOE is not intended to be directly connected to a hostile network. Therefore, the environment must provide an appropriate level of network isolation. 4.2.3 Trusted Administrators The TOE Owner shall establish trust that Administrators will not use their privileges for malicious purposes [OE.ADMIN_TRUST]. Administrators have privileges that can be misused for malicious purposes. It is the responsibility of the TOE Owner to grant administrator privileges only to individuals whom the TOE Owner trusts. 4.2.4 Trained Users The TOE Owner shall ensure that Users are aware of site security policies and have the competence to follow them [OE.USER_TRAINING]. Site security depends on a combination of TOE security functions and appropriate use of those functions by Normal Users. Manufacturers may provide guidance to the TOE Owner regarding the TOE security functions that apply to Normal Users. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 36 4.2.5 Trained Administrators The TOE Owner shall ensure that Administrators are aware of site security policies and have the competence to use manufacturer’s guidance to correctly configure the TOE and protect passwords and keys accordingly [OE.ADMIN_TRAINING]. This kind of TOE may have many options for enabling and disabling security functions. Administrators must be able to understand and configure the TOE security functions to enforce site security policies. 4.3 Security Objectives Rationale The following rationale is reproduced from [HCD]. Table 10 - Security Objectives rationale Threat/Policy/Assumption Rationale T.UNAUTHORIZED_ACCESS An attacker may access (read, modify, or delete) User Document Data or change (modify or delete) User Job Data in the TOE through one of the TOE’s interfaces. O.ACCESS_CONTROL restricts access to User Data in the TOE to authorized Users. O.USER_I&A provides the basis for access control. O.ADMIN_ROLES restricts the ability to authorize Users and set access controls to authorized Administrators. T.TSF_COMPROMISE An attacker may gain Unauthorized Access to TSF Data in the TOE through one of the TOE’s interfaces. O.ACCESS_ CONTROL restricts access to TSF Data in the TOE to authorized Users. O.USER_I&A provides the basis for access control. O.ADMIN_ROLES restricts the ability to authorize Users and set access controls to authorized Administrators. T.TSF_FAILURE A malfunction of the TSF may cause loss of security if the TOE is permitted to operate. O.TSF_SELF_TEST prevents the TOE from operating if a malfunction is detected. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 37 Threat/Policy/Assumption Rationale T.UNAUTHORIZED_UPDATE An attacker may cause the installation of unauthorized software on the TOE. O.UPDATE_VERIFICATION verifies the authenticity of software updates. T.NET_COMPROMISE An attacker may access data in transit or otherwise compromise the security of the TOE by monitoring or manipulating network communication. O.COMMS_PROTECTION protects LAN communications from sniffing, replay, and man- in- the-middle attacks. P.AUTHORIZATION Users must be authorized before performing Document Processing and administrative functions. O.USER_AUTHORIZATION restricts the ability to perform Document Processing and administrative functions to authorized Users. O.USER_I&A provides the basis for authorization. O.ADMIN_ROLES restricts the ability to authorize Users to authorized Administrators. P.AUDIT Security-relevant activities must be audited and the log of such actions must be protected and transmitted to an External IT Entity. O.AUDIT requires the generation of audit data. O.ACCESS_CONTROL restricts access to audit data in the TOE to authorized Users. O.USER_AUTHORIZATION provides the basis for authorization. P.COMMS_PROTECTION The TOE must be able to identify itself to other devices on the LAN. O.COMMS_PROTECTION protects LAN communications from man-in-the-middle attacks. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 38 Threat/Policy/Assumption Rationale P.STORAGE_ENCRYPTION If the TOE stores User Document Data or Confidential TSF Data on Field- Replaceable Nonvolatile Storage Devices, it will encrypt such data on those devices. O.STORAGE_ENCRYPTION protects User Document Data and Confidential TSF Data stored in Field-Replaceable Nonvolatile Storage Devices from exposure if a device has been removed from the TOE and its Operational Environment. P.KEY_MATERIAL Cleartext keys, submasks, random numbers, or any other values that contribute to the creation of encryption keys for Field-Replaceable Nonvolatile Storage of User Document Data or Confidential TSF Data must be protected from unauthorized access and must not be stored on that storage device. O.KEY_MATERIAL protects keys and key materials from unauthorized access and ensures that they any key materials are not stored in cleartext on the device that uses those materials for its own encryption. P.FAX_FLOW If the TOE provides a PSTN fax function, it will ensure separation between the PSTN fax line and the LAN. O.FAX_NET_SEPARATION requires a separation between the PSTN fax line and the LAN. P.IMAGE_OVERWRITE Upon completion or cancellation of a Document Processing job, the TOE shall overwrite residual image data from its Field-Replaceable Nonvolatile Storage Device. O.IMAGE_OVERWRITE overwrites residual image data from Field-Replaceable Nonvolatile Storage Devices after Document Processing jobs are completed or cancelled . Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 39 Threat/Policy/Assumption Rationale P.PURGE_DATA The TOE shall provide a function that an authorized administrator can invoke to make all customer-supplied User Data and TSF Data permanently irretrievable from Nonvolatile Storage Devices. O.PURGE_DATA provides a function that makes all customer-supplied User Data and TSF Data permanently irretrievable from Nonvolatile Storage Devices when invoked by an authorized administrator. A.PHYSICAL Physical security, commensurate with the value of the TOE and the data it stores or processes, is assumed to be provided by the environment. OE.PHYSICAL_PROTECTION establishes a protected physical environment for the TOE. A.NETWORK The Operational Environment is assumed to protect the TOE from direct, public access to its LAN interface. OE.NETWORK_PROTECTION establishes a protected LAN environment for the TOE. A.TRUSTED_ADMIN TOE Administrators are trusted to administer the TOE according to site security policies. OE.ADMIN_TRUST establishes responsibility of the TOE Owner to have a trusted relationship with Administrators. A.TRAINED_USERS Authorized Users are trained to use the TOE according to site security policies. OE.ADMIN_TRAINING establishes responsibility of the TOE Owner to provide appropriate training for Administrators. OE.USER_TRAINING establishes responsibility of the TOE Owner to provide appropriate training for Users. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 40 5. Extended Components Definition The following extended components defined in [HCD] are used in this Security Target. The following information is copied from [HCD]; note that paragraph numbering shown in this chapter corresponds to paragraph numbers in [HCD]. 5.1 Extended SFR Component Definitions 5.1.1 FAU_STG_EXT Extended: External Audit Trail Storage Family Behavior: This family defines requirements for the TSF to ensure that secure transmission of audit data from TOE to an External IT Entity. Component leveling: FAU_STG_EXT.1 External Audit Trail Storage requires the TSF to use a trusted channel implementing a secure protocol. Management: The following actions could be considered for the management functions in FMT:  The TSF shall have the ability to configure the cryptographic functionality. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FAU_STG_EXT.1 Extended: Protected Audit Trail Storage Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation, FTP_ITC.1 Inter-TSF trusted channel FAU_STG_EXT.1.1 The TSF shall be able to transmit the generated audit data to an External IT Entity using a trusted channel according to FTP_ITC.1. Rationale: FAU_STG_EXT.1: Extended: External Audit Trail Storage 1 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 41 The TSF is required that the transmission of generated audit data to an External IT Entity which relies on a non-TOE audit server for storage and review of audit records. The storage of these audit records and the ability to allow the administrator to review these audit records is provided by the Operational Environment in that case. The Common Criteria does not provide a suitable SFR for the transmission of audit data to an External IT Entity. This extended component protects the audit records, and it is therefore placed in the FAU class with a single component. 5.1.2 FCS_CKM_EXT Extended: Cryptographic Key Management Family Behavior: This family addresses the management aspects of cryptographic keys. Especially, this extended component is intended for cryptographic key destruction. Component leveling: FCS_CKM_EXT.4 Cryptographic Key Material Destruction ensures not only keys but also key materials that are no longer needed are destroyed by using an approved method. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction Hierarchical to: No other components. FCS_CKM_EXT.4: Extended: Cryptographic Key Material Destruction 4 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 42 Dependencies: [FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys), or FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys)], FCS_CKM.4 Cryptographic key destruction FCS_CKM_EXT.4.1The TSF shall destroy all plaintext secret and private cryptographic keys and cryptographic critical security parameters when no longer needed. Rationale: Cryptographic Key Material Destruction is to ensure the keys and key materials that are no longer needed are destroyed by using an approved method, and the Common Criteria does not provide a suitable SFR for the Cryptographic Key Material Destruction. This extended component protects the cryptographic key and key materials against exposure, and it is therefore placed in the FCS class with a single component. 5.1.3 FCS_IPSEC_EXT Extended: IPsec selected Family Behavior: This family addresses requirements for protecting communications using IPsec. Component leveling: FCS_IPSEC_EXT.1 IPsec requires that IPsec be implemented as specified. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  Failure to establish an IPsec SA FCS_IPSEC_EXT.1 Extended: IPsec selected 1 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 43 FCS_IPSEC_EXT.1 Extended: IPsec selected Hierarchical to: No other components. Dependencies: FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys) FCS_COP.1(a) Cryptographic Operation (Symmetric encryption/decryption) FCS_COP.1(b) Cryptographic Operation (for signature generation/verification) FCS_COP.1(c) Cryptographic Operation (Hash Algorithm) FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FCS_IPSEC_EXT.1.1 The TSF shall implement the IPsec architecture as specified in RFC 4301. FCS_IPSEC_EXT.1.2 The TSF shall implement [selection: tunnel mode, transport mode]. FCS_IPSEC_EXT.1.3 The TSF shall have a nominal, final entry in the SPD that matches anything that is otherwise unmatched, and discards it. FCS_IPSEC_EXT.1.4 The TSF shall implement the IPsec protocol ESP as defined by RFC 4303 using [selection: the cryptographic algorithms AES-CBC-128 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)-based HMAC, AES-CBC- 256 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)-based HMAC, AES-GCM-128 as specified in RFC 4106, AES-GCM- 256 as specified in RFC 4106]. FCS_IPSEC_EXT.1.5 The TSF shall implement the protocol: [selection: IKEv1, using Main Mode for Phase 1 exchanges, as defined in RFCs 2407, 2408, 2409, RFC 4109, [selection: no other RFCs for extended sequence numbers, RFC 4304 for extended sequence numbers], and [selection: no other RFCs for hash functions, RFC 4868 for hash functions]; IKEv2 as defined in RFCs 5996 [selection: Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 44 with no support for NAT traversal, with mandatory support for NAT traversal as specified in section 2.23], and [selection: no other RFCs for hash functions, RFC 4868 for hash functions]]. FCS_IPSEC_EXT.1.6 The TSF shall ensure the encrypted payload in the [selection: IKEv1, IKEv2] protocol uses the cryptographic algorithms AES-CBC- 128, AES-CBC-256 as specified in RFC 3602 and [selection: AES-GCM-128, AES-GCM-256 as specified in RFC 5282, no other algorithm]. FCS_IPSEC_EXT.1.7 The TSF shall ensure that IKEv1 Phase 1 exchanges use only main mode. FCS_IPSEC_EXT.1.8 The TSF shall ensure that [selection: IKEv2 SA lifetimes can be established based on [selection: number of packets/number of bytes; length of time, where the time values can be limited to: 24 hours for Phase 1 SAs and 8 hours for Phase 2 SAs]; IKEv1 SA lifetimes can be established based on [selection: number of packets/number of bytes ; length of time, where the time values can be limited to: 24 hours for Phase 1 SAs and 8 hours for Phase 2 SAs]]. FCS_IPSEC_EXT.1.9 The TSF shall ensure that all IKE protocols implement DH Groups 14 (2048-bit MODP), and [selection: 24 (2048-bit MODP with 256-bit POS), 19 (256-bit Random ECP), 20 (384-bit Random ECP, 5 (1536-bit MODP)), [assignment: other DH groups that are implemented by the TOE], no other DH groups]. FCS_IPSEC_EXT.1.10 The TSF shall ensure that all IKE protocols perform Peer Authentication using the [selection: RSA, ECDSA] algorithm and Pre-shared Keys. Rationale: IPsec is one of the secure communication protocols, and the Common Criteria does not provide a suitable SFR for the communication protocols using cryptographic algorithms. This extended component protects the communication data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component. 5.1.4 FCS_KYC_EXT Extended: Cryptographic Operation (Key Chaining) Family Behavior: Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 45 This family provides the specification to be used for using multiple layers of encryption keys to ultimately secure the protected data encrypted on the storage. Component leveling: FCS_KYC_EXT Key Chaining, requires the TSF to maintain a key chain and specifies the characteristics of that chain. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FCS_KYC_EXT.1 Extended: Key Chaining Hierarchical to: No other components. Dependencies: [FCS_COP.1(e) Cryptographic operation (Key Wrapping), FCS_SMC_EXT.1 Extended: Submask Combining, FCS_COP.1(i) Cryptographic operation (Key Transport), FCS_KDF_EXT.1 Cryptographic Operation (Key Derivation), and/or FCS_COP.1(f) Cryptographic operation (Key Encryption)]. FCS_KYC_EXT.1.1 The TSF shall maintain a key chain of: [selection: one, using a submask as the BEV or DEK; intermediate keys originating from one or more submask(s) to the BEV or DEK using the following method(s): [selection: key wrapping as specified in FCS_COP.1(e), key combining as specified in FCS_SMC_EXT.1, key encryption as specified in FCS_COP.1(f), key derivation as specified in FCS_KDF_EXT.1, key transport as specified in FCS_COP.1(i)]] while maintaining an effective strength of [selection: 128 bits, 256 bits]. FCS_KYC_EXT Key Chaining 1 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 46 Rationale: Key Chaining ensures that the TSF maintains the key chain, and also specifies the characteristics of that chain. However, the Common Criteria does not provide a suitable SFR for the management of multiple layers of encryption key to protect encrypted data. This extended component protects the TSF data using cryptographic algorithms, and it is therefore placed in the FCS class with a single component. 5.1.5 FCS_RBG_EXT Extended: Cryptographic Operation (Random Bit Generation) Family Behavior: This family defines requirements for random bit generation to ensure that it is performed in accordance with selected standards and seeded by an entropy source. Component leveling: FCS_RBG_EXT.1 Random Bit Generation requires random bit generation to be performed in accordance with selected standards and seeded by an entropy source. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FCS_RBG_EXT.1 Extended: Random Bit Generation Hierarchical to: No other components. Dependencies: No dependencies. FCS_RBG_EXT.1 Extended: Random Bit Generation 1 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 47 FCS_RBG_EXT.1.1 The TSF shall perform all deterministic random bit generation services in accordance with [selection: ISO/IEC 18031:2011, NIST SP 800-90A] using [selection: Hash_DRBG (any), HMAC_DRBG (any), CTR_DRBG (AES)]. FCS_RBG_EXT.1.2 The deterministic RBG shall be seeded by an entropy source that accumulates entropy from [selection: [assignment: number of software-based sources] software-based noise source(s), [assignment: number of hardware-based sources] hardware-based noise source(s)] with a minimum of [selection: 128 bits, 256 bits] of entropy at least equal to the greatest security strength, according to ISO/IEC 18031:2011 Table C.1 “Security strength table for hash functions”, of the keys and hashes that it will generate. Rationale: Random bits/number will be used by the SFRs for key generation and destruction, and the Common Criteria does not provide a suitable SFR for the random bit generation. This extended component ensures the strength of encryption keys, and it is therefore placed in the FCS class with a single component. 5.1.6 FDP_DSK_EXT Extended: Protection of Data on Disk Family Behavior: This family is to mandate the encryption of all protected data written to the storage. Component leveling: FDP_DSK_EXT.1 Extended: Protection of Data on Disk, requires the TSF to encrypt all the Confidential TSF and User Data stored on the Field-Replaceable Nonvolatile Storage Devices in order to avoid storing these data in plaintext on the devices. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. FDP_DSK_EXT.1 Extended: Protection of Data on Disk 1 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 48 Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FDP_DSK_EXT.1 Extended: Protection of Data on Disk Hierarchical to: No other components. Dependencies: FCS_COP.1(d) Cryptographic operation (AES Data Encryption/Decryption) FDP_DSK_EXT.1.1 The TSF shall [selection: perform encryption inaccordance with FCS_COP.1(d), use a self-encrypting Field-Replaceable Nonvolatile Storage Device that is separately CC certified to conform to the FDE EE cPP] such that any Field- Replaceable Nonvolatile Storage Device contains no plaintext User Document Data and no plaintext confidential TSF Data. FDP_DSK_EXT.1.2 The TSF shall encrypt all protected data without user intervention. Rationale: Extended: Protection of Data on Disk is to specify that encryption of any confidential data without user intervention, and the Common Criteria does not provide a suitable SFR for the Protection of Data on Disk. This extended component protects the Data on Disk, and it is therefore placed in the FDP class with a single component. 5.1.7 FDP_FXS_EXT Extended: Fax Separation Family Behavior: This family addresses the requirements for separation between Fax PSTN line and the LAN to which TOE is connected. Component leveling: Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 49 FDP_FXS_EXT.1 Fax Separation, requires the fax interface cannot be used to create a network bridge between a PSTN and a LAN to which TOE is connected. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FDP_FXS_EXT.1 Extended: Fax separation Hierarchical to: No other components. Dependencies: No dependencies. FDP_FXS_EXT.1.1 The TSF shall prohibit communication via the fax interface, except transmitting or receiving User Data using fax protocols. Rationale: Fax Separation is to protect a LAN against attack from PSTN line, and the Common Criteria does not provide a suitable SFR for the Protection of TSF or User Data. This extended component protects the TSF Data or User Data, and it is therefore placed in the FDP class with a single component. 5.1.8 FIA_PMG_EXT Extended: Password Management Family Behavior: This family defines requirements for the attributes of passwords used by administrative users to ensure that strong passwords and passphrases can be chosen and maintained. Component leveling: FDP_FXS_EXT.1 Extended: Fax Separation 1 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 50 FIA_PMG _EXT.1 Password management requires the TSF to support passwords with varying composition requirements, minimum lengths, maximum lifetime, and similarity constraints. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FIA_PMG _EXT.1 Extended: Password management Hierarchical to: No other components. Dependencies: No dependencies. FIA_PMG _EXT.1.1The TSF shall provide the following password management capabilities for User passwords:  Passwords shall be able to be composed of any combination of upper and lower case letters, numbers, and the following special characters: [selection: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”, [assignment: other characters]];  Minimum password length shall be settable by an Administrator, and have the capability to require passwords of 15 characters or greater. Rationale: Password Management is to ensure the strong authentication between the endpoints of communication, and the Common Criteria does not provide a suitable SFR for the Password Management. FIA_PMG _EXT.1 Extended: Password Management 1 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 51 This extended component protects the TOE by means of password management, and it is therefore placed in the FIA class with a single component. 5.1.9 FIA_PSK_EXT Extended: Pre-Shared Key Composition Family Behavior: This family defines requirements for the TSF to ensure the ability to use pre-shared keys for IPsec. Component leveling: FIA_PSK_EXT.1 Pre-Shared Key Composition, ensures authenticity and access control for updates. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition Hierarchical to: No other components. Dependencies: FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation). FIA_PSK_EXT.1.1 The TSF shall be able to use pre-shared keys for IPsec. FIA_PSK_EXT.1.2 The TSF shall be able to accept text-based pre-shared keys that are:  22 characters in length and [selection: [assignment: other supported lengths], no other lengths], FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition 1 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 52  composed of any combination of upper and lower case letters, numbers, and special characters (that include: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, and “)”). FIA_PSK_EXT.1.3 The TSF shall condition the text-based pre-shared keys by using [selection: SHA-1, SHA-256, SHA-512, [assignment: method of conditioning text string]] and be able to [selection: use no other pre-shared keys; accept bit-based pre-shared keys; generate bit-based pre-shared keys using the random bit generator specified in FCS_RBG_EXT.1]. Rationale: Pre-shared Key Composition is to ensure the strong authentication between the endpoints of communications, and the Common Criteria does not provide a suitable SFR for the Pre-shared Key Composition. This extended component protects the TOE by means of strong authentication, and it is therefore placed in the FIA class with a single component. 5.1.10 FPT_KYP_EXT Extended: Protection of Key and Key Material Family Behavior: This family addresses the requirements for keys and key materials to be protectedif and when written to nonvolatile storage. Component leveling: FPT_KYP_EXT.1 Extended: Protection of key and key material, requires the TSF to ensure that no plaintext key or key materials are written to nonvolatile storage. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST: FPT_KYP_EXT.1 Protection of key and key material 1 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 53  There are no auditable events foreseen. FPT_KYP_EXT.1 Extended: Protection of Key and KeyMaterial Hierarchical to: No other components. Dependencies: No dependencies. FPT_KYP_EXT.1.1 The TSF shall not store plaintext keys that are part of the keychain specified by FCS_KYC_EXT.1 in any Field-Replaceable Nonvolatile Storage Device, and not store any such plaintext key on a device that uses the key for its encryption. Rationale: Protection of Key and Key Material is to ensure that no plaintext key or key material are written to nonvolatile storage, and the Common Criteria does not provide a suitable SFR for the protection of key and key material. This extended component protects the TSF data, and it is therefore placed in the FPT class with a single component. 5.1.11 FPT_SKP_EXT Extended: Protection of TSF Data Family Behavior: This family addresses the requirements for managing and protecting the TSF data, such as cryptographic keys. This is a new family modelled as the FPT Class. Component leveling: FPT_SKP_EXT.1 Protection of TSF Data (for reading all symmetrickeys), requires preventing symmetric keys from being read by any user or subject. It is the only component of this family. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: FPT_SKP_EXT.1 Extended: Protection of TSF Data 1 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 54 The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FPT_SKP_EXT.1 Extended: Protection of TSF Data Hierarchical to: No other components. Dependencies: No dependencies. FPT_SKP_EXT.1.1 The TSF shall prevent reading of all pre-shared keys, symmetric keys, and private keys. Rationale: Protection of TSF Data is to ensure the pre-shared keys, symmetric keys and private keys are protected securely, and the Common Criteria does not provide a suitable SFR for the protection of such TSF data. This extended component protects the TOE by means of strong authentication using Pre- shared Key, and it is therefore placed in the FPT class with a single component. 5.1.12 FPT_TST_EXT Extended: TSF testing Family Behavior: This family addresses the requirements for self-testing the TSF for selectedcorrect operation. Component leveling: FPT_TST_EXT.1 TSF testing requires a suite of self-testing to be run during initial start-up in order to demonstrate correct operation of the TSF. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: FPT_TST_EXT.1 Extended: TSF testing 1 Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 55 The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST:  There are no auditable events foreseen. FPT_TST_EXT.1 Extended: TSF testing Hierarchical to: No other components. Dependencies: No dependencies. FPT_TST_EXT.1.1 The TSF shall run a suite of self-tests during initial start-up (and power on) to demonstrate the correct operation of the TSF. Rationale: TSF testing is to ensure the TSF can be operated correctly, and the Common Criteria does not provide a suitable SFR for the TSF testing. In particular, there is no SFR defined for TSF testing. This extended component protects the TOE, and it is therefore placed in the FPT class with a single component. 5.1.13 FPT_TUD_EXT Extended: Trusted Update Family Behavior: This family defines requirements for the TSF to ensure that only administrators can update the TOE firmware/software, and that such firmware/software is authentic. Component leveling: FPT_TUD_EXT.1 Trusted Update, ensures authenticity and access control for updates. Management: The following actions could be considered for the management functions in FMT:  There are no management actions foreseen. Audit: The following actions should be auditable if FAU_GEN Security Audit Data Generation is included in the PP/ST: FPT_TUD_EXT.1 Extended: Trusted Update 1 Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 56  There are no auditable events foreseen. FPT_TUD_EXT.1 Trusted Update Hierarchical to: No other components. Dependencies: FCS_COP.1(b) Cryptographic Operation (for signature generation/verification) FCS_COP.1(c) Cryptographic operation (Hash Algorithm). FPT_TUD_EXT.1.1 The TSF shall provide authorized administrators the ability to query the current version of the TOE firmware/software. FPT_TUD_EXT.1.2 The TSF shall provide authorized administrators the ability to initiate updates to TOE firmware/software. FPT_TUD_EXT.1.3 The TSF shall provide a means to verify firmware/software updates to the TOE using a digital signature mechanism and [selection: published hash, no other functions] prior to installing those updates. Rationale: Firmware/software is a form of TSF Data, and the Common Criteria does not provide a suitable SFR for the management of firmware/software. In particular, there is no SFR defined for importing TSF Data. This extended component protects the TOE, and it is therefore placed in the FPT class with a single component. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 57 6. Security Requirements This section contains the functional requirements that are provided by the TOE. The CC defines operations on security requirements. The font conventions listed below state the conventions used in this ST to identify the operations. Assignment: indicated in underlined text Selection: indicated in italics Assignments within selections: indicated in italics and underlined text SFR operation completed or partially completed in the PP: Bold Refinement: indicated with bold text Iterations of security functional requirements may be included. If so, iterations are specified at the component level and all elements of the component are repeated. Iterations are identified by letters in parentheses following the component or element (e.g., FAU_ARP.1(a)). 6.1 TOE Security Functional Requirements Table 11 - TOE Security Functional Requirements SFR Description FAU_GEN.1 Audit Data Generation FAU_GEN.2 User Identity Association FAU_SAR.1 Audit review FAU_SAR.2 Restricted audit review FAU_STG.1 Protected audit trail storage FAU_STG.4 Prevention of audit data loss FAU_STG_EXT.1 Extended: External Audit Trail Storage FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys) FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys) FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_CKM.4 Cryptographic key destruction FCS_COP.1(a) Cryptographic Operation (Symmetric encryption/decryption) FCS_COP.1(b) Cryptographic Operation (for signature generation/verification) FCS_COP.1(c) Cryptographic Operation (Hash Algorithm) FCS_COP.1(d) Cryptographic operation (AES Data Encryption/Decryption) FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) FCS_IPSEC_EXT.1 Extended: IPsec selected FCS_KYC_EXT.1 Extended: Key Chaining FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FDP_ACC.1 Subset access control FDP_ACF.1 Security attribute based access control FDP_DSK_EXT.1 Extended: Protection of Data on Disk FDP_FXS_EXT.1 Extended: Fax separation FDP_RIP.1(a) Subset residual information protection FDP_RIP.1(b) Subset residual information protection FIA_AFL.1 Authentication failure handling FIA_ATD.1 User attribute definition FIA_PMG_EXT.1 Extended: Password Management FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition FIA_UAU.1 Timing of authentication Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 58 SFR Description FIA_UAU.7 Protected authentication feedback FIA_UID.1 Timing of identification FIA_USB.1 User-subject binding FMT_MOF.1 Management of security functions behavior FMT_MSA.1 Management of security attributes FMT_MSA.3 Static attribute initialization FMT_MTD.1 Management of TSF data FMT_SMF.1 Specification of Management Functions FMT_SMR.1 Security roles FPT_KYP_EXT.1 Extended: Protection of Key and Key Material FPT_SKP_EXT.1 Extended: Protection of TSF Data FPT_STM.1 Reliable time stamps FPT_TST_EXT.1 Extended: TSF testing FPT_TUD_EXT.1 Extended: Trusted Update FTA_SSL.3 TSF-initiated termination FTP_ITC.1 Inter-TSF trusted channel FTP_TRP.1(a) Trusted path (for Administrators) FTP_TRP.1(b) Trusted path (for Non-administrators) Note that paragraph numbering shown in this chapter corresponds to paragraph numbers in [HCD]. 6.1.1 Security Audit (FAU) 6.1.1.1 FAU_GEN.1 Audit Data Generation (for O.AUDIT) Hierarchical to: No other components. Dependencies: FPT_STM.1 Reliable time stamps FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events: a) Start-up and shutdown of the audit functions; b) All auditable events for the not specified level of audit; and c) All auditable events specified in Table 12, [no other auditable events]. Refinement Rationale: The table reference is changed to reflect the contents of the ST. FAU_GEN.1.2 The TSF shall record within each audit record at least the following information: a) Date and time of the event, type of event, subject identity (if applicable), and the outcome (success or failure) of the event; and Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 59 b) For each audit event type, based on the auditable event definitions of the functional components included in the PP/ST, additional information specified in Table 12, [no other information]. Refinement Rationale: The table reference is changed to reflect the contents of the ST. Table 12 - Auditable Events Auditable event Relevant SFR Additional information Job completion FDP_ACF.1 Type of job, JobID Job started FDP_ACF.1 Type of job, JobID Successful User identification and authentication FIA_UAU.1, FIA_UID.1 SessionID Unsuccessful User authentication FIA_UAU.1 UserID supplied Unsuccessful User identification FIA_UID.1 UserID supplied Use of management functions FMT_SMF.1 Parameter ID, old and new values Modification to the group of Users that are part of a role FMT_SMR.1 None Changes to the time FPT_STM.1 None Failure to establish session FTP_ITC.1, FTP_TRP.1(a), FTP_TRP.1(b) Reason for failure Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 60 Auditable event Relevant SFR Additional information Audit log cleared by authorized administrator FAU_STG.1 None 6.1.1.2 FAU_GEN.2 User Identity Association (for O.AUDIT) Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FIA_UID.1 Timing of identification FAU_GEN.2.1 For audit events resulting from actions of identified users, the TSF shall be able to associate each auditable event with the identity of the user that caused the event. 6.1.1.3 FAU_SAR.1 Audit review (for O.AUDIT) Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FAU_SAR.1.1 The TSF shall provide [U.ADMIN] with the capability to read all records from the audit records. FAU_SAR.1.2 The TSF shall provide the audit records in a manner suitable for the user to interpret the information. 6.1.1.4 FAU_SAR.2 Restricted audit review (for O.AUDIT) Hierarchical to: No other components. Dependencies: FAU_SAR.1 Audit review FAU_SAR.2.1 The TSF shall prohibit all users read access to the audit records, except those users that have been granted explicit read-access. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 61 6.1.1.5 FAU_STG.1 Protected audit trail storage (for O.AUDIT) Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation FAU_STG.1.1 The TSF shall protect the stored audit records in the audit trail from unauthorised deletion. FAU_STG.1.2 The TSF shall be able to prevent unauthorised modifications to the stored audit records in the audit trail. 6.1.1.6 FAU_STG.4 Prevention of audit data loss (for O.AUDIT) Hierarchical to: FAU_STG.3 Action in case of possible audit data loss Dependencies: FAU_STG.1 Protected audit trail storage FAU_STG.4.1 Refinement: The TSF shall [overwrite the oldest stored audit records] and [take no other actions] if the audit trail is full. 6.1.1.7 FAU_STG_EXT.1 Extended: External Audit Trail Storage (for O.AUDIT) Hierarchical to: No other components. Dependencies: FAU_GEN.1 Audit data generation, FTP_ITC.1 Inter-TSF trusted channel. FAU_STG_EXT.1.1 The TSF shall be able to transmit the generated audit data to an External IT Entity using a trusted channel according to FTP_ITC.1. 6.1.2 Cryptographic Support (FCS) 6.1.2.1 FCS_CKM.1(a)1 Cryptographic Key Generation (for asymmetric keys) (for O.COMMS_PROTECTION) Hierarchical to: No other components. Dependencies: [FCS_CKM.2 Cryptographic key distribution, or 1 Modified per TD0642. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 62 FCS_COP.1(b) Cryptographic Operation (for signature generation/ verification)] FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_CKM.1.1(a) Refinement: The TSF shall generate asymmetric cryptographickeys used for key establishment in accordance with [  NIST Special Publication 800-56B, “Recommendation for Pair-Wise Key Establishment Schemes Using Integer Factorization Cryptography” for RSA- based key establishment schemes ] and specified cryptographic key sizes equivalent to, or greater than, a symmetric key strength of 112 bits. 6.1.2.2 FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys) (for O.COMMS_PROTECTION, O.STORAGE_ENCRYPTION) Hierarchical to: No othercomponents. Dependencies: [FCS_CKM.2 Cryptographic key distribution, or FCS_COP.1(a) Cryptographic Operation (Symmetric encryption/decryption) FCS_COP.1(d) Cryptographic Operation (AES Data Encryption/Decryption) FCS_COP.1(e) Cryptographic Operation (Key Wrapping) FCS_COP.1(f) Cryptographic operation (Key Encryption) FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) FCS_COP.1(h) Cryptographic Operation (for keyed-hash message authentication)] FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FCS_CKM.1.1(b) Refinement: The TSF shall generate symmetric cryptographic keys using a Random Bit Generator as specified in FCS_RBG_EXT.1 and specified cryptographic key sizes [128 bit, 256 bit] that meet the following: No Standard. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 63 6.1.2.3 FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction (for O.COMMS_PROTECTION, O.STORAGE_ENCRYPTION, O.PURGE_DATA) Hierarchical to: No other components. Dependencies: [FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys), or FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys)], FCS_CKM.4 Cryptographic key destruction FCS_CKM_EXT.4.1 The TSF shall destroy all plaintext secret and private cryptographic keys and cryptographic critical security parameters when no longer needed. 6.1.2.4 FCS_CKM.42 Cryptographic key destruction (for O.COMMS_PROTECTION, O.STORAGE_ENCRYPTION, O.PURGE_DATA) Hierarchical to: No other components. Dependencies: [FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys), or FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys)] FCS_CKM.4.1(a) Refinement: The TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method [ For volatile memory, the destruction shall be executed by a [removal of power to the memory]. For nonvolatile memory the destruction shall be executed by a [single overwrite consisting of [zeroes]]. ] that meets the following: No Standard. 6.1.2.5 FCS_COP.1(a) Cryptographic Operation (Symmetric encryption/decryption) (for O.COMMS_PROTECTION) Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or 2 Modified per TD0261. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 64 FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys)] FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_COP.1.1(a) Refinement: The TSF shall perform encryption and decryption in accordance with a specified cryptographic algorithm AES operating in [CBC mode] and cryptographic key sizes 128-bits and 256-bits that meets the following:  FIPS PUB 197, “Advanced Encryption Standard (AES)”  [NIST SP 800-38A] Application Note: For this TOE, this SFR addresses AES for IPsec only. 6.1.2.6 FCS_COP.1(b)3 Cryptographic Operation (for signature generation/verification) (for O.UPDATE_VERIFICATION, O.COMMS_PROTECTION) Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys)] FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_COP.1.1(b) Refinement: The TSF shall perform cryptographic signature services in accordance with a [  RSA Digital Signature Algorithm (rDSA) with key sizes (modulus) of [2048 bits]] that meets the following [  FIPS PUB 186-4, “Digital Signature Standard” ]. 6.1.2.7 FCS_COP.1(c) Cryptographic Operation (Hash Algorithm) (selected in FPT_TUD_EXT.1.3) Hierarchical to: No other components. 3 Applied TD0642. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 65 Dependencies: No dependencies. FCS_COP.1.1(c) Refinement: The TSF shall perform cryptographic hashing services in accordance with [SHA-1, SHA-256, SHA-384] that meet the following: [ISO/IEC 10118-3:2004]. 6.1.2.8 FCS_COP.1(d) Cryptographic operation (AES Data Encryption/Decryption) (for O. STORAGE_ENCRYPTION) Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys)] FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_COP.1.1(d) The TSF shall perform data encryption and decryption in accordance with a specified cryptographic algorithm AES used in [CBC] mode and cryptographic key sizes [256 bits] that meet the following: AES as specified in ISO/IEC 18033-3, [CBC as specified in ISO/IEC 10116]. 6.1.2.9 FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) (selected with FCS_IPSEC_EXT.1.4) Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1(b) Cryptographic key generation (Symmetric Keys)] FCS_CKM_EXT.4 Extended: Cryptographic Key Material Destruction FCS_COP.1.1(g) Refinement: The TSF shall perform keyed-hash message authentication in accordance with a specified cryptographic algorithm HMAC-[ Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 66 SHA-1, SHA-256, SHA-384], key size [160, 256 and 384 bits], and message digest sizes [160, 256, 384] bits that meet the following: FIPS PUB 198-1, "The Keyed- Hash Message Authentication Code, and FIPS PUB 180-3, “Secure Hash Standard.” 6.1.2.10 FCS_IPSEC_EXT.1 Extended: IPsec selected (selected in FTP_ITC.1.1, FTP_TRP.1.1) Hierarchical to: No other components. Dependencies: FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition FCS_CKM.1(a) Cryptographic Key Generation (for asymmetric keys) FCS_COP.1(a) Cryptographic Operation (Symmetric encryption/decryption) FCS_COP.1(b) Cryptographic Operation (for signature generation/verification) FCS_COP.1(c) Cryptographic Operation (Hash Algorithm) FCS_COP.1(g) Cryptographic Operation (for keyed-hash message authentication) FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FCS_IPSEC_EXT.1.1 The TSF shall implement the IPsec architecture as specified in RFC 4301. FCS_IPSEC_EXT.1.2 The TSF shall implement [transport mode]. FCS_IPSEC_EXT.1.3 The TSF shall have a nominal, final entry in the SPD that matches anything that is otherwise unmatched, and discards it. FCS_IPSEC_EXT.1.4 The TSF shall implement the IPsec protocol ESP as defined by RFC 4303 using [the cryptographic algorithms AES-CBC-128 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)-based HMAC, AES-CBC- 256 (as specified by RFC 3602) together with a Secure Hash Algorithm (SHA)-based HMAC]. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 67 FCS_IPSEC_EXT.1.5 The TSF shall implement the protocol: [IKEv1, using Main Mode for Phase 1 exchanges, as defined in RFCs 2407, 2408, 2409, RFC 4109, [RFC 4304 for extended sequence numbers], and [no other RFCs for hash functions]; IKEv2 as defined in RFCs 5996, [with no support for NAT traversal], and [no other RFCs for hash functions]]. FCS_IPSEC_EXT.1.6 The TSF shall ensure the encrypted payload in the [IKEv1, IKEv2] protocol uses the cryptographic algorithms AES-CBC-128, AES-CBC- 256 as specified in RFC 3602 and [no other algorithm]. FCS_IPSEC_EXT.1.7 The TSF shall ensure that IKEv1 Phase 1 exchanges use only main mode. FCS_IPSEC_EXT.1.8 The TSF shall ensure that [IKEv2 SA lifetimes can be established based on [length of time, where the time values can be limited to: 24 hours for Phase 1 SAs and 8 hours for Phase 2 SAs]; IKEv1 SA lifetimes can be established based on [length of time, where the time values can be limited to: 24 hours for Phase 1 SAs and 8 hours for Phase 2 SAs]]. FCS_IPSEC_EXT.1.9 The TSF shall ensure that all IKE protocols implement DH Groups 14 (2048-bit MODP), and [no other DH groups]. FCS_IPSEC_EXT.1.10 The TSF shall ensure that all IKE protocols perform Peer Authentication using the [RSA] algorithm and Pre-shared Keys. 6.1.2.11 FCS_KYC_EXT.1 Extended: Key Chaining (for O.STORAGE_ENCRYPTION) Hierarchical to: No other components. Dependencies: [FCS_COP.1(e) Cryptographic operation (Key Wrapping), FCS_SMC_EXT.1 Extended: Submask Combining, FCS_COP.1(f) Cryptographic operation (Key Encryption), FCS_KDF_EXT.1 Cryptographic Operation (Key Derivation), and/or FCS_COP.1(i) Cryptographic operation (Key Transport)] FCS_KYC_EXT.1.1 The TSF shall maintain a key chain of: [one, using a submask as the BEV or DEK] while maintaining an effective strength of [256 bits]. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 68 6.1.2.12 FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) (for O.STORAGE_ENCRYPTION and O.COMMS_PROTECTION) Hierarchical to: No other components. Dependencies: No dependencies. FCS_RBG_EXT.1.1: The TSF shall perform all deterministic random bit generation services in accordance with [NIST SP 800-90A] using [CTR_DRBG (AES)]. FCS_RBG_EXT.1.2 The deterministic RBG shall be seeded by at least one entropy source that accumulates entropy from [[1] hardware-based noise source(s)] with a minimum of [256 bits] of entropy at least equal to the greatest security strength, according to ISO/IEC 18031:2011 Table C.1 “Security Strength Table for Hash Functions”, of the keys and hashes that it will generate. 6.1.3 User Data Protection (FDP) 6.1.3.1 FDP_ACC.1 Subset access control (for O.ACCESS_CONTROL and O.USER_AUTHORIZATION) Hierarchical to: No other components. Dependencies: FDP_ACF.1 Security attribute based access control FDP_ACC.1.1 Refinement: The TSF shall enforce the User Data Access Control SFP on subjects, objects, and operations among subjects and objects specified in Table 13 - and Table 14 -. 6.1.3.2 FDP_ACF.1 Security attribute based access control (for O.ACCESS_CONTROL and O.USER_AUTHORIZATION) Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FMT_MSA.3 Static attribute initialization FDP_ACF.1.1 Refinement: The TSF shall enforce the User Data Access Control SFP to objects based on the following: subjects, objects, and attributes specified in Table 13 - and Table 14 -. FDP_ACF.1.2 Refinement: The TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 69 allowed: rules governing access among controlled subjects and controlled objects using controlled operations on controlled objects specified in Table 13 - and Table 14 -. FDP_ACF.1.3 Refinement: The TSF shall explicitly authorise access of subjects to objects based on the following additional rules: [ 1. Received faxes are automatically received and stored when receipt of faxes is enabled via device configuration. No U.ADMIN action is required per- fax. 2. Only U.ADMIN with the Release Held Faxes permission may release held faxes for printing.]. FDP_ACF.1.4 Refinement: The TSF shall explicitly deny access of subjects to objects based on the following additional rules: [ 1. The Job Owner of submitted print jobs is determined by a Userid included in the embedded PJL. Print jobs received without a Userid, or with an unknown Userid, or with a Userid of a user that does not have the Held Jobs Access permission, are deleted after the specified timeout period for releasing held print jobs. During this time, no access to the print jobs is possible since access is restricted to the job owner.]. Table 13 - D.USER.DOC Access Control SFP “Create" "Read" "Modify" "Delete" Print Operation: Submit a document to be printed View image or Release printed output Modify stored document Delete stored document Job owner (with Held Jobs Access) Yes Release No Yes Job owner (without Held Jobs Access) Yes, but deleted denied denied denied Unknown user Yes, but deleted denied denied denied No userid specified Yes, but deleted denied denied denied U.ADMIN U.ADMIN has no inherent privileges; rather this role can only create/access his/her own jobs and will fall into one of the categories listed above Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 70 “Create" "Read" "Modify" "Delete" U.NORMAL U.NORMAL has no inherent privileges; rather this role can only create/access his/her own jobs and will fall into one of the categories listed above Unauthenticated See above categories denied denied denied Scan Operation: Submit a document for scanning View scanned image Modify stored image Delete stored image Job owner (with E- mail Function permission) Yes No No No U.ADMIN denied denied denied denied U.NORMAL denied denied denied denied Unauthenticated denied denied denied denied Copy Operation: Submit a document for copying View scanned image or Release printed copy output Modify stored image Delete stored image Job owner (with Copy Function permission) Yes No No Yes U.ADMIN denied denied denied denied U.NORMAL denied denied denied denied Unauthenticated denied denied denied denied Fax send Operation: Submit a document to send as a fax View scanned image Modify stored image Delete stored image Job owner (with Fax Function permission) Yes No No No U.ADMIN denied denied denied denied U.NORMAL denied denied denied denied Unauthenticated denied denied denied denied Fax receive Operation: Receive a fax and store it View fax image or Release printed Modify image of received Delete image of received Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 71 “Create" "Read" "Modify" "Delete" fax output fax fax Fax owner (U.ADMIN with Release Held Faxes) Automatic Release No No U.ADMIN (without Release Held Faxes) Automatic denied denied denied U.NORMAL Automatic denied denied denied Unauthenticated Automatic denied denied denied Table 14 - D.USER.JOB Access Control SFP “Create" "Read" "Modify" "Delete" Print Operation: Create print job View print queue / log Modify print job Cancel print job Job owner (with Held Jobs Access) Yes Yes for itself Modify # of copies Yes for itself Job owner (without Held Jobs Access) Yes, but deleted denied denied denied Unknown user Yes, but deleted denied denied denied No userid specified Yes, but deleted denied denied denied U.ADMIN U.ADMIN has no inherent privileges; rather this role can only create/access his/her own jobs and will fall into one of the categories listed above U.NORMAL U.NORMAL has no inherent privileges; rather this role can only create/access his/her own jobs and will fall into one of the categories listed above Unauthenticated See above categories denied denied denied Scan Operation: Create scan job View scan status / log Modify scan job Cancel scan job Job owner (with E- mail Function permission) Yes No No No U.ADMIN denied denied denied denied U.NORMAL denied denied denied denied Unauthenticated denied denied denied denied Copy Operation: Create copy job View copy status / log Modify copy job Cancel copy job Job owner (with Copy Function Yes No No Yes Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 72 “Create" "Read" "Modify" "Delete" permission) U.ADMIN denied denied denied denied U.NORMAL denied denied denied denied Unauthenticated denied denied denied denied Fax send Operation: Create fax send job View fax job queue / log Modify fax send job Cancel fax send job Job owner (with Fax Function permission) Yes No No No U.ADMIN denied denied denied denied U.NORMAL denied denied denied denied Unauthenticated denied denied denied denied Fax receive Operation: Create fax receive job View fax receive status / log Modify fax receive job Cancel fax receive job Fax owner (U.ADMIN with Release Held Faxes) Automatic Release No No U.ADMIN (without Release Held Faxes) Automatic denied denied denied U.NORMAL Automatic denied denied denied Unauthenticated Automatic denied denied denied 6.1.3.3 FDP_DSK_EXT.1 Extended: Protection of Data on Disk (for O.STORAGE_ENCRYPTION) Hierarchical to: No other components. Dependencies: FCS_COP.1(d) Cryptographic operation (AES Data Encryption/Decryption). FDP_DSK_EXT.1.1 The TSF shall [perform encryption in accordance with FCS_COP.1(d)], such that any Field- Replaceable Nonvolatile Storage Device contains no plaintext User Document Data and no plaintext Confidential TSF Data. FDP_DSK_EXT.1.2 The TSF shall encrypt all protected data without user intervention. 6.1.3.4 FDP_FXS_EXT.1 Extended: Fax separation (for O.FAX_NET_SEPARATION) Hierarchical to: No other components. Dependencies: No dependencies. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 73 FDP_FXS_EXT.1.1 The TSF shall prohibit communication via the fax interface, except transmitting or receiving User Data using fax protocols. 6.1.3.5 FDP_RIP.1(a) Subset residual information protection (for O.IMAGE_OVERWRITE) Hierarchical to: No other components. Dependencies: No dependencies. FDP_RIP.1.1(a) Refinement: The TSF shall ensure that any previous information content of a resource is made unavailable by overwriting data upon the deallocation of the resource from the following objects: D.USER.DOC. 6.1.3.6 FDP_RIP.1(b) Subset residual information protection (for O.PURGE_DATA) Hierarchical to: No other components. Dependencies: No dependencies. FDP_RIP.1.1(b) Refinement: The TSF shall ensure that any previous customer- supplied information content of a resource is made unavailable upon the request of an Administrator to the following objects: D.USER, D.TSF. 6.1.4 Identification and Authentication (FIA) 6.1.4.1 FIA_AFL.1 Authentication failure handling (for O.USER_I&A) Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_AFL.1.1 The TSF shall detect when [an administrator configurable positive integer within [1-10]] unsuccessful authentication attempts occur related to [consecutive login attempts via the touch panel or web interface within the configured time period]. FIA_AFL.1.2 When the defined number of unsuccessful authentication attempts has been [met], the TSF shall [automatically lock the user account for the configured amount of time]. 6.1.4.2 FIA_ATD.1 User attribute definition (for O.USER_AUTHORIZATION) Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 74 Hierarchical to: No other components. Dependencies: No dependencies. FIA_ATD.1.1 The TSF shall maintain the following list of securityattributes belonging to individual users: [ 1. Username 2. Password 3. Associated groups 4. User permissions, as specified by associated groups 5. Number of consecutive authentication failures 6. Time of the earliest authentication failure (since the last successful login if any have occurred) 7. Account lock status]. 6.1.4.3 FIA_PMG_EXT.1 Extended: Password Management (for O.USER_I&A) Hierarchical to: No other components. Dependencies: No dependencies. FIA_PMG_EXT.1.1 The TSF shall provide the following password management capabilities for User passwords:  Passwords shall be able to be composed of any combination of upper and lower case letters, numbers, and the following special characters: [“!”,“@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, “)”, [other ASCII characters except CR and NL]];  Minimum password length shall be settable by an Administrator and have the capability to require passwords of 15 characters or greater. 6.1.4.4 FIA_PSK_EXT.1 Extended: Pre-Shared Key Composition (selected with FCS_IPSEC_EXT.1.4) Hierarchical to: No other components. Dependencies: FCS_RBG_EXT.1 Extended: Cryptographic Operation (Random Bit Generation) FIA_PSK_EXT.1.1 The TSF shall be able to use pre-shared keys for IPsec. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 75 FIA_PSK_EXT.1.2 The TSF shall be able to accept text-based pre-shared keys that are:  22 characters in length and [[lengths from 1 to 256 characters]];  composed of any combination of upper and lower case letters, numbers, and special characters (that include: “!”, “@”, “#”, “$”, “%”, “^”, “&”, “*”, “(“, and “)”). FIA_PSK_EXT.1.3 The TSF shall condition the text-based pre-shared keys by using [SHA-1, SHA-256] and be able to [use no other pre-shared keys]. 6.1.4.5 FIA_UAU.1 Timing of authentication (for O.USER_I&A) Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification FIA_UAU.1.1 Refinement: The TSF shall allow [submit print jobs; view operational status of the device, receive faxes (if that function is enabled by the administrator)] on behalf of the user to be performed before the user is authenticated. FIA_UAU.1.2 The TSF shall require each user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that user. 6.1.4.6 FIA_UAU.7 Protected authentication feedback (for O.USER_I&A) Hierarchical to: No other components. Dependencies: FIA_UAU.1 Timing of authentication FIA_UAU.7.1 The TSF shall provide only [only asterisks (“*”) or dots (“●”)] to the user while the authentication is in progress. 6.1.4.7 FIA_UID.1 Timing of identification (for O.USER_I&A and O.ADMIN_ROLES) Hierarchical to: No other components. Dependencies: No dependencies. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 76 FIA_UID.1.1 Refinement: The TSF shall allow [submit print jobs; view operational status of the device, receive faxes (if receive faxes is enabled by the administrator)] on behalf of the user to be performed before the user is identified. FIA_UID.1.2 The TSF shall require each user to be successfully identified before allowing any other TSF-mediated actions on behalf of that user. 6.1.4.8 FIA_USB.1 User-subject binding (for O.USER_I&A) Hierarchical to: No other components. Dependencies: FIA_ATD.1 User attribute definition FIA_USB.1.1 The TSF shall associate the following user security attributes with subjects acting on the behalf of that user: [ 1. Username 2. Associated groups 3. User permissions]. FIA_USB.1.2 The TSF shall enforce the following rules on the initial association of user security attributes with subjects acting on the behalf of users: [ 1. The username are the values supplied by the user. 2. The associated groups are the values configured for the user account. 3. User permissions are determined by combining the configured permissions for each associated group.]. FIA_USB.1.3 The TSF shall enforce the following rules governing changes to the user security attributes associated with subjects acting on the behalf of users: [the security attributes do not change during a session]. 6.1.5 Security Management (FMT) 6.1.5.1 FMT_MOF.1 Management of security functions behavior (for O.ADMIN_ROLES) Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 77 FMT_MOF.1.1 Refinement: The TSF shall restrict the ability to [determine the behaviour of, disable, enable, modify the behaviour of] the functions [  Audit  Identification and authentication  Authorization and access controls  Communication with External IT Entities  Network communications  System or network time source  Device functions (e.g., Fax) ] to U.ADMIN. 6.1.5.2 FMT_MSA.1 Management of security attributes (for O.ACCESS_CONTROL and O.USER_AUTHORIZATION) Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MSA.1.1 Refinement:The TSF shall enforce the User Data Access Control SFP to restrict the ability to [query, modify, delete, [create]] the security attributes [Username, associated groups and user permissions] to [administrators authorized for access to the Security Menu]. 6.1.5.3 FMT_MSA.3 Static attribute initialization (for O.ACCESS_CONTROL and O.USER_AUTHORIZATION) Hierarchical to: No other components. Dependencies: FMT_MSA.1 Management of security attributes FMT_SMR.1 Security roles FMT_MSA.3.1 Refinement:The TSF shall enforce the User Data Access Control SFP to provide [restrictive] default values for security attributes that are used to enforce the SFP. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 78 FMT_MSA.3.2 Refinement:The TSF shall allow the [no role] to specify alternative initial values to override the default values when an object or information is created. 6.1.5.4 FMT_MTD.1 Management of TSF data (for O.ACCESS CONTROL) Hierarchical to: No other components. Dependencies: FMT_SMR.1 Security roles FMT_SMF.1 Specification of Management Functions FMT_MTD.1.1 Refinement: The TSF shall restrict the ability to perform the specified operations on the specified TSF Data to the roles specified in Table 15 -. Application Note: Since U.ADMIN is represented by multiple distinct permissions, the following table identifies the associated permission rather than grouping everything under the U.ADMIN role. Table 15 - Management of TSF Data Data Operation Authorized Role(s) (Associated Permission) TSF Data owned by a U.NORMAL or associated with Documents or jobs owned by a U.NORMAL D.USER.JOB Query, Delete Held Jobs Access (for the user’s own jobs only) TSF Data not owned by a U.NORMAL Active Directory Configuration Create Security Menu Analog Fax - Cancel Faxes Query, Modify Function Configuration Menus Analog Fax - Enable Fax Receive Query, Modify Function Configuration Menus Analog Fax - Enable Manual Fax Query, Modify Function Configuration Menus Analog Fax - Holding Faxes Query, Modify, Delete, Create Function Configuration Menus Date and Time Parameters Query, Modify Device Menu Disk Encryption Query, Modify Security Menu Enable Audit Query, Modify Security Menu Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 79 Data Operation Authorized Role(s) (Associated Permission) Enable Fax Scans Query, Modify Function Configuration Menus Enable HTTP Server Query, Modify Network/Ports Menu Enable Remote Syslog Query, Modify Security Menu Fax Mode Query, Modify Function Configuration Menus Fax Server - Enable Analog Receive Query, Modify Function Configuration Menus Groups Query, Modify, Delete, Create Security Menu Held Print Job Expiration Timer Query, Modify Security Menu IPSec Settings Query, Modify Network/Ports Menu Job Waiting Query, Modify Device Menu Kerberos Setup Query, Modify Security Menu LDAP Certificate Verification Query, Modify Security Menu LDAP+GSSAPI – MFP Credentials Query, Modify Security Menu LDAP+GSSAPI Configuration Query, Modify, Delete, Create Security Menu Login Restrictions Query, Modify Security Menu Network Port Query, Modify Network/Ports Menu Permissions Query, Modify Security Menu Remote Syslog Parameters Query, Modify Security Menu Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 80 Data Operation Authorized Role(s) (Associated Permission) Security Reset Jumper Query, Modify Security Menu Smart Card Authentication Client Configuration Query, Modify Security Menu SMTP Setup Settings Query, Modify Network/Ports Menu SMTP Setup Settings - User-Initiated E-mail Query, Modify Network/Ports Menu USB Buffer Query, Modify Network/Ports Menu Username/Password Accounts Query, Modify, Delete, Create Security Menu Visible Home Screen Icons Query, Modify Device Menu Software, firmware, and related configuration data Firmware Query Reports Menu Modify Firmware Updates 6.1.5.5 FMT_SMF.1 Specification of Management Functions (for O.USER_AUTHORIZATION, O.ACCESS_CONTROL, and O.ADMIN_ROLES) Hierarchical to: No other components. Dependencies: No dependencies. FMT_SMF.1.1 The TSF shall be capable of performing the following management functions: [  User management (e.g., add/change/remove local user)  Role management (e.g., assign/deassign role relationship with user)  Configuring identification and authentication (e.g., selecting between local and external I&A)  Configuring authorization and access controls (e.g., access control lists for TOE resources)  Configuring communication with External IT Entities  Configuring network communications  Configuring the system or network time source Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 81  Configuring data transmission to audit server  Configuring internal audit log storage  Configure applications  Perform firmware updates  Configure device functions  Sanitize device]. 6.1.5.6 FMT_SMR.1 Security roles (for O.ACCESS_CONTROL, O.USER_AUTHORIZATION, and O.ADMIN_ROLES) Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification FMT_SMR.1.1 Refinement: The TSF shall maintain the roles U.ADMIN, U.NORMAL. FMT_SMR.1.2The TSF shall be able to associate users with roles. 6.1.6 Protection of the TSF (FPT) 6.1.6.1 FPT_KYP_EXT.1 Extended: Protection of Key and Key Material (for O.KEY_MATERIAL) Hierarchical to: No other components. Dependencies: No dependencies. FPT_KYP_EXT.1.1 Refinement: The TSF shall not store plaintext keys that are part of the keychain specified by FCS_KYC_EXT.1 in any Field-Replaceable Nonvolatile StorageDevice. 6.1.6.2 FPT_SKP_EXT.1 Extended: Protection of TSF Data (for O.COMMS_PROTECTION) Hierarchical to: No other components. Dependencies: No dependencies. FPT_SKP_EXT.1.1 The TSF shall prevent reading of all pre-sharedkeys, symmetric keys, and private keys. 6.1.6.3 FPT_STM.1 Reliable time stamps (for.O.AUDIT) Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 82 Hierarchical to: No other components. Dependencies: No dependencies. FPT_STM.1.1 The TSF shall be able to provide reliable time stamps. 6.1.6.4 FPT_TST_EXT.1 Extended: TSF testing (for O.TSF_SELF_TEST) Hierarchical to: No other components. Dependencies: No dependencies. FPT_TST_EXT.1.1 The TSF shall run a suite of self-tests during initial start-up (and power on) to demonstrate the correct operation of the TSF. 6.1.6.5 FPT_TUD_EXT.1 Extended: Trusted Update (for O.UPDATE_VERIFICATION) Hierarchical to: No other components. Dependencies: FCS_COP.1(b) Cryptographic Operation (for signature generation/verification) FCS_COP.1(c) Cryptographic operation (Hash Algorithm). FPT_TUD_EXT.1.1 The TSF shall provide authorized administrators the ability to query the current version of the TOE firmware/software. FPT_TUD_EXT.1.2 The TSF shall provide authorized administrators the ability to initiate updates to TOE firmware/software. FPT_TUD_EXT.1.3 The TSF shall provide a means to verify firmware/software updates to the TOE using a digital signature mechanism and [no other functions] prior to installing those updates. 6.1.7 TOE Access (FTA) 6.1.7.1 FTA_SSL.3 TSF-initiated termination (for O.USER_I&A) Hierarchical to: No other components. Dependencies: No dependencies. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 83 FTA_SSL.3.1 The TSF shall terminate an interactive session after a[configurable time interval of user inactivity in the range of 1 to 120 minutes for the web interface and 10 to 300 seconds for the touch panel]. 6.1.8 Trusted Paths/Channels (FTP) 6.1.8.1 FTP_ITC.1 Inter-TSF trusted channel (for O.COMMS_PROTECTION, O.AUDIT) Hierarchical to: No other components. Dependencies: [FCS_IPSEC_EXT.1 Extended: IPsec selected, or FCS_TLS_EXT.1 Extended: TLS selected, or FCS_SSH_EXT.1 Extended: SSH selected, or FCS_HTTPS_EXT.1 Extended: HTTPS selected]. FTP_ITC.1.1 Refinement: The TSF shall use [IPsec] to provide a trusted communication channel between itself and authorized IT entities supporting the following capabilities: [authentication server, [remote audit server, email server, network time server]] that is logically distinct from other communication channels and provides assured identification of its end points and protection of the channel data from disclosure and detection of modification of the channeldata. Application Note: authentication server refers to both a KDC or an LDAP server (including Active Directory). FTP_ITC.1.2 Refinement: The TSF shall permit the TSF, or the authorized IT entities, to initiate communication via the trusted channel FTP_ITC.1.3 Refinement: The TSF shall initiate communication via the trusted channel for [remote authentication, sending audit records, network time synchronization, sending email]. 6.1.8.2 FTP_TRP.1(a) Trusted path (for Administrators) (for O.COMMS_PROTECTION) Hierarchical to: No other components. Dependencies: [FCS_IPSEC_EXT.1 Extended: IPsec selected, or FCS_TLS_EXT.1 Extended: TLS selected, or FCS_SSH_EXT.1 Extended: SSH selected, or FCS_HTTPS_EXT.1 Extended: HTTPS selected]. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 84 FTP_TRP.1.1(a) Refinement: The TSF shall use [IPsec] to provide a trusted communication path between itself and remote administrators that is logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from disclosure and detection of modification of the communicated data. FTP_TRP.1.2(a) Refinement: The TSF shall permit remote administrators to initiate communication via the trusted path FTP_TRP.1.3(a) Refinement: The TSF shall require the use of the trusted path for initial administrator authentication and all remote administration actions. 6.1.8.3 FTP_TRP.1(b) Trusted path (for Non-administrators) (for O.COMMS_PROTECTION) Hierarchical to: No other components. Dependencies: [FCS_IPSEC_EXT.1 Extended: IPsec selected, or FCS_TLS_EXT.1 Extended: TLS selected, or FCS_SSH_EXT.1 Extended: SSH selected, or FCS_HTTPS_EXT.1 Extended: HTTPS selected]. FTP_TRP.1.1(b) Refinement : The TSF shall use [IPsec] to provide a trusted communication path betweenitself and remote users that is logically distinct from other communication paths and provides assured identification of its end points and protection of the communicated data from disclosure and detection of modification of the communicateddata. FTP_TRP.1.2(b) Refinement: The TSF shall permit [the TSF, remote users] to initiate communication via the trusted path FTP_TRP.1.3(b) Refinement: The TSF shall require the use of the trusted path for initial user authentication and all remote user actions. 6.2 Security Assurance Requirements The Security Assurance Requirements are the EAL 1 components as specified in Part 3 of the Common Criteria. Note that these components are refined by the assurance activities stated in [HCD], which are included by reference. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 85 Table 16 - TOE Assurance Components Summary Assurance Classes Assurance Component Description Security Target ASE_CCL.1 Conformance claims ASE_ECD.1 Extended components definition ASE_INT.1 ST introduction ASE_OBJ.1 Security objectives for the operational environment ASE_REQ.1 Stated security requirements ASE_SPD.1 Security Problem Definition ASE_TSS.1 TOE summary specification Development ADV_FSP.1 Basic Functional Specification Guidance Documents AGD_OPE.1 Operational User Guidance AGD_PRE.1 Preparative Procedures Lifecycle Support ALC_CMC.1 Labeling of the TOE ALC_CMS.1 TOE CM Coverage Test ATE_IND.1 Independent Testing – Conformance Vulnerability Assessment AVA_VAN.1 Vulnerability survey Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 86 7. TOE Summary Specification 7.1 Security Functions 7.1.1 Identification, Authentication and Authorization Users are required to successfully complete the I&A process before they are permitted to access any restricted data or functionality. The set of restricted user functionality is under the control of the administrators, with the exception of submission of network print jobs which is always allowed. A new session is established for the touch panel when the system boots and for web sessions when the connection is established. All sessions are initially bound to the Guest (default) user. In the evaluated configuration, the Guest user has no access to restricted functions or data other than allowing print jobs to be submitted. Users must log in as a different user in order to gain access to TOE functionality. Multiple login mechanisms are supported in the evaluated configuration: Smart Card authentication, Username/Password Accounts and LDAP+GSSAPI. Note that Smart Card and LDAP+GSSAPI authentications also use Kerberos functionality when authenticating certificates or credentials. Username/Password information is stored in flash. For Smart Card authentication, no functions at the touch panel are allowed until I&A successfully completes. The touch panel displays a message directing the user to insert a card into the attached reader. Once a card is inserted, the user is prompted for a PIN. When the PIN is entered, only asterisks (“*”) or dots (“●”) are displayed. Asterisks are displayed on the touch panel; dots are displayed on the web interface. Once the PIN is collected (indicated by the user touching the Next button), the TOE passes the PIN to the card for validation. If it is not valid, a message is displayed on the touch panel and the user is asked to re-enter the PIN. After the card- configured number of consecutive invalid PINs, the card will lock itself until unlocked by a card administrator. Upon successful card validation, the TOE forwards the certificate from the card to the configured Kerberos Key Distribution Center (Windows Domain Controller) for validation. If the certificate validation is not successful, an error message is displayed on the touch panel until the current card is removed from the reader. If the certificate validation is successful, the TOE binds the username, account name, and email address (all obtained from the KDC/LDAP server) to the user session for future use. An audit record for the successful authentication is generated. All communication with the KDC and LDAP server uses IPsec. For Username/Password Accounts and LDAP+GSSAPI, the TOE collects a username and password via the touch panel or via the browser session. When the password is entered, only asterisks (“*”) are displayed. Once the username and password are collected, the next step in the process depends on the I&A mechanism being used. For Username/Password Accounts, the TOE performs the validation of the username and password against the set of configured Username/Password Accounts. If the validation fails because of an invalid password (for a valid username), the count of failed authentication attempts is incremented for that account. If the threshold for failed attempts within a time period is reached, then the account is marked as being locked for the configured amount of time to mitigate against brute force password attacks. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 87 For LDAP+GSSAPI, the TOE hashes the supplied password and forwards the username in an authentication request signed by the hashed password to the configured KDC for validation (using the configured machine credentials) and waits for the response. If no response is received, the validation is considered to have failed. In the case of failed validations, an error message is displayed via the touch panel or browser session, and then the display returns to the previous screen for further user action. An audit record for the failed authentication attempt is generated. If validation is successful, the TOE retrieves the account name and email address from the LDAP server and binds them to the user session for future use. An audit record for the successful authentication is generated. Permissions for the user session are determined from group memberships. Authorized Administrators assign roles to user accounts by configuring permissions for each configured group and then assigning user accounts to groups. At minimum, during installation Authorized Administrators must perform the user account configuration activities in the guidance documentation to establish the evaluated configuration:  Create new groups for Authorized Administrators and Authorized Users. The group names must correspond to names used in the LDAP server of Smart Card or LDAP+GSSAPI authentication is used.  Configure appropriate permissions for each of those groups  Assign all users and administrators using Username/Password Accounts to groups  Modify the Public permissions (which are the only permissions for the Guest user account so that only B/W Print and Color Print are configured For Username/Password accounts, the permissions for each group that the user is a member of (as specified in the account configuration) are combined. For Smart Cards and LDAP+GSSAPI, a list of group memberships are retrieved from the LDAP server. For each of those groups that match a group configured in the TOE, the permissions are combined. If the group memberships or permissions are changed, active sessions are not affected; the changes take effect at the next login. The user session is considered to be active until the user explicitly logs off, removes the card or the administrator-configured inactivity timer for sessions expires. The timer values are separately configurable: 1 to 120 minutes for the web interface and 10 to 300 seconds for the touch panel. Users of the TOE, whether accessing the TOE via the touch panel or web interface, are considered to be in one or more of the following categories:  Authorized Users – permitted to perform one or more of the user functions defined in FDP_ACC.1 and FDP_ACF.1.  Authorized Administrators – permitted to access administrative functionality for control and monitoring of the MFP operation.  Any Users – Authorized Users and Authorized Administrators The following Permissions may be configured for groups: Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 88 Table 17 - Permissions Item Description Comment Address Book Controls the ability to manage the Address Book contents. Permission may only be granted to authorized administrators in the evaluated configuration Apps Configuration Controls access to the configuration of any installed applications Permission may only be granted to authorized administrators in the evaluated configuration. B/W Print Controls the ability to accept black and white print jobs. Permission must be granted to the Public permissions Cancel Jobs at the device Controls access to the functionality to cancel jobs via the touch panel. Permission may only be granted to authorized users in the evaluated configuration Change Language from Home Screen Controls access to the Change Language button on the Home screen (when displayed); this button is NOT displayed by default but a user can activate it via the “General Settings Menu” Permission may be granted to any users Color Dropout Controls a user’s ability to activate the Color Dropout functionality as part of a job; if protected and the user fails to authenticate, then the device DOES NOT use the color dropout functionality in the job Permission may only be granted to authorized users in the evaluated configuration Color Print Controls the ability to print color jobs. Permission must be granted to the Public permissions Copy Color Printing Controls a user’s ability to copy content in color Permission may only be granted to authorized users in the evaluated configuration Copy Function Controls a user’s access to the Copy functionality Permission may only be granted to authorized users in the evaluated configuration Create Profiles Controls the ability to create scan profiles from remote systems. Permission must not be specified for any user Device Menu Controls access to the Device administrative menu Permission may only be granted to authorized administrators in the evaluated configuration E-mail Function Control’s a user’s access to the Email functionality (scan to email) Permission may only be granted to authorized users in the evaluated configuration Fax Function Control’s a user’s ability to perform a scan to fax job Note that when “Disabled” via fax configuration, all analog faxing (scan send, receive, and driver send) and the fax server are disabled. The fax icon is never displayed. Permission may only be granted to authorized users in the evaluated configuration Firmware Updates Controls a user’s ability to update the device’s firmware code via the network Permission may only be granted to authorized administrators in the evaluated configuration Flash Drive Color Printing Controls whether USB interfaces may be used for color print operations Permission must not be specified for any user Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 89 Item Description Comment Flash Drive Print Controls whether USB interfaces may be used for black and white print operations Permission must not be specified for any user Flash Drive Scan Controls whether USB interfaces may be used for scan operations Permission must not be specified for any user FTP Function Controls a user’s ability to access the FTP button on the Home Screen (when displayed). Permission must not be specified for any user Function Configuration Menus Controls access to the configuration menus for the print, copy, fax, e-mail and FTP functions. Permission may only be granted to authorized administrators in the evaluated configuration Held Jobs Access Controls access to the Held Jobs function Permission may only be granted to authorized users in the evaluated configuration Import/Export Settings Controls the ability to import and export configuration files Permission may only be granted to authorized administrators in the evaluated configuration Internet Printing Protocol (IPP) Controls access to print job submission via IPP Permission must not be specified for any user Manage Bookmarks Controls access to the Delete Bookmark, Create Bookmark, and Create Folder buttons from both the bookmark list screen and from the individual bookmark screen Permission must not be specified for any user Manage Shortcuts Controls access to the Manage Shortcuts Menu Permission must not be specified for any user Network/Ports Menu Controls access to the Network/ Ports Menu Permission may only be granted to authorized administrators in the evaluated configuration New Apps Controls access to configuration parameters for apps subsequently added to the device. Permission may only be granted to authorized administrators in the evaluated configuration Operator Panel Lock Controls access to the “Lock Device” and “Unlock Device” buttons Permission may only be granted to authorized users in the evaluated configuration Option Card Menu Controls a user’s ability to access the “Option Card Menu” that displays menu nodes associated with installed DLEs Permission may only be granted to authorized administrators in the evaluated configuration Out of Service Erase Controls the ability to wipe the storage of the MFP when it is being taken out of service. Permission may only be granted to authorized administrators in the evaluated configuration Paper Menu Controls access to the Paper Menu Permission may be granted to any users Release Held Faxes Controls access to the Held Faxes button and the Release Held Faxes button on the Home screen Permission may only be granted to authorized administrators in the evaluated configuration Remote Management Controls whether or not management functions may be invoked from remote IT systems Permission must not be specified for any user Reports Menu Controls access to the Reports Menu. This includes information about user jobs, which can’t be disclosed to non- administrators. Permission may only be granted to authorized administrators in the evaluated configuration Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 90 Item Description Comment Search Address Book Controls access to the Search Address Book button that appears as part of the E-mail, FTP, and Fax functions that are available from the panel’s Home screen Permission may be granted to any users Security Menus Controls access to the Security Menu Permission may only be granted to authorized administrators in the evaluated configuration Supplies Menus Controls access to the Security Menu Permission may only be granted to authorized administrators in the evaluated configuration Use Profiles Controls a user’s ability to execute any profile Permission must not be specified for any user Table 18 - Identification, Authentication and Authorization SFR Details SFR Description FCS_CKM_EXT.4 When Username/Password accounts are deleted, the associated password is destroyed in flash. FCS_CKM.4 When Username/Password accounts are deleted, the associated password in flash is overwritten with zeros. Passwords in RAM are destroyed when power is removed. FIA_AFL.1 Consecutive login failures for each user account within a configured time period are tracked, and if the configured limit is reached the user account is automatically locked for the configured amount of time. FIA_ATD.1 The TSF maintains the following security attributes for users:  Username (configured for internal account, acquired from LDAP server AD and Smartcards)  Password (internal accounts)  Associated groups (configured for internal account, acquired from LDAP server AD and Smartcards)  Permissions (dynamically determined by group memberships)  Number of consecutive login failures  Time of earliest login failure (since last successful login)  Account lock status FIA_PMG_EXT.1 Passwords for internal accounts are configured by administrators. The minimum password length is configurable from 1-32 characters. Passwords may contain any ASCII characters other than NL and CR. FIA_UAU.1 User interaction through the touch panel and web interface prior to successful authentication is limited to viewing the operational status of the device (e.g. low paper). Users may submit print jobs without authenticating, but the jobs are not printed until released by the authenticated user. FIA_UAU.7 When a password or PIN is entered for authentication, only asterisks (“*”) or dots (“●”) are displayed. FIA_UID.1 User interaction through the touch panel and web interface prior to successful identification is limited to viewing the operational status of the device. Users may submit print jobs and supply identification via embedded PJL, but the jobs are not printed until released by the authenticated user. Invalid and missing identification in print jobs results in those print jobs being deleted. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 91 SFR Description FIA_USB.1 Upon successful login, the username, associated groups and permissions are bound to the session. The username is the value specified during login or the username associated with the certificate from a smartcard. The groups are those configured internally or on the LDAP server. The permissions are the union of the permissions for each associated group. These bindings do not change during an active session. FTA_SSL.3 Upon expiration of an inactivity timer, the corresponding session is automatically terminated. 7.1.1.1 Active Directory Additional Information If Active Directory parameters are supplied and Join is selected, the parameter values are used to join the Active Directory Domain. If successful, machine credentials are generated and the LDAP+GSSAPI configuration parameters are automatically updated with the Domain and machine information. Once the Domain has been joined, subsequent I&A attempts may use the LDAP+GSSAPI configuration to validate user credentials using the newly-created machine credentials as described above. The credentials specified for Active Directory by an authorized administrator are not saved. Communication with the Active Directory server uses IPsec. 7.1.2 Access Control Access control validates a user access request against the session’s permissions. Authorization is restricted by not associating a permission with a function. When the FAC is a menu, access is also restricted to all submenus (a menu that is normally reached by navigating through the listed item). This is necessary for instances where a shortcut could bypass the listed menu. If a shortcut is used to access a sub-menu, the access control check for the applicable menu item is still performed (as if normal menu traversal was being performed). When a function is restricted, the access control function determines if the user has permission to access the function. Normally the icons for the functions the user is not permitted to access are not displayed in the GUI. The following table summarizes the access controls and configuration parameters used by the TOE to control user access to the MFP functions provided by the TOE. Additional details for each function are provided in subsequent sections. Table 19 - TOE User Function Access Control Function Access Control Rules Configuration Parameter Rules Print Network print jobs can always be submitted. The job is held until released by a user who is authorized for the Held Jobs Access function and has the same userid as was specified in the SET USERNAME PJL statement. Network print jobs without a PJL Allowed Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 92 Function Access Control Rules Configuration Parameter Rules SET USERNAME statement are automatically deleted after the expiry period for held jobs. Allowed for incoming faxes if the user has permission to access Release Held Faxes. Allowed if the “Enable Fax Receive” or “Enable Analog Receive” parameter is “On”. Fax Send Allowed if the user has permission to access Fax Function Allowed if the “Enable Fax Scans” parameter is On and the “Fax Mode” parameter is “Analog Fax” Copy Allowed if the user has permission to access Copy Function Allowed Fax Receive Incoming faxes are not subject to access control. All incoming faxes are held until released by a user who has permission to access Release Held Faxes Allowed if the “Enable Fax Receive” or “Enable Analog Receive” parameter is “On”. Scan (Fax E-mail Server) Allowed if the user has permission to access E-mail Function Allowed if the “Enable Fax Scans” parameter is On and the “Fax Mode” parameter is “Fax Server” Table 20 - User Functions Access Control SFR Details SFR Description FDP_ACC.1/FDP_ACF.1 Access to user functions is controlled as specified in these SFRs. Printing Submission of print jobs from users on the network is always permitted. Jobs that do not contain a PJL SET USERNAME statement are discarded after the configured held jobs expiry period. Submitted jobs are always held on the TOE until released or deleted by a user authorized for the appropriate access control and whose userid matches the username specified when the job was submitted. Users are able to display the queue of their pending print jobs. If a held job is not released within the configured expiration time, the job is automatically deleted. In the evaluated configuration, the setdevparams, setsysparams and setuserparams Postscript operators are made non-operational so that the Postscript DataStream cannot modify configuration settings in the TOE. Fax Sending and Scan (Fax E-mail Server) Only authorized users may send faxes. Scanning for fax is allowed if the Enable Fax Scans configuration parameter is “On” and the user is authorized for the Fax Function access control. Scanning for email is allowed if the user is authorized for the E-mail Function access control. The destination of the fax scan is determined by the setting of the “Fax Mode” configuration parameter. If it is configured for “Analog Fax” then the scanned data is transmitted out the phone line as a fax. If it is configured for “Fax Server” then the scanned data is forwarded to the configured email server via SMTP. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 93 Copying Copying is allowed if the user is authorized for the Copy Function access control. Incoming Fax Incoming faxes are allowed if the “Enable Fax Receive” (for analog fax mode) or “Enable Fax Receive” (for fax server mode) configuration parameter is “On”. Incoming faxes are always held in the queue (until released) in the evaluated configuration. Only users authorized for the Release Held Faxes access control may release or delete the faxes. 7.1.3 Data Encryption All document data saved on the Hard Disk is encrypted using 256-bit AES. This includes submitted print jobs, copy jobs waiting to be printed, received faxes waiting to be printed, scan jobs waiting to be emailed, and faxes waiting to be sent. The contents of each file are automatically encrypted (AES-CBC) as they are written to the Hard Disk and automatically decrypted when the contents are read. This security function is intended to protect against data disclosure if a malicious agent is able to gain physical possession of the Hard Disk. A common key is used to encrypt all files. The key is generated using the internal random number generator during installation of the Hard Disk. Details of the key chain for the key are provided in the ancillary Key Management Description document. The random number generator function conforms to NIST SP 800-90A Revision 1 using CTR_DRBG(AES) and is seeded with a minimum of 256 bits of entropy by a single hardware source described in the ancillary Entropy document. The encryption key is specific to the MFP and hard disk. Any copy of the disk encryption key in RAM is destroyed when power is turned off. Section in 7.1.10 provides information concerning destruction of the disk encryption key stored in flash memory. Table 21 - Data Encryption SFR Details SFR Description FCS_CKM.1(b) An AES-256 key is generated during hard disk installation. FCS_CKM_EXT.4 The disk encryption key is destroyed when an administrator commands the decommission process to be performed. FCS_CKM.4 Information regarding key destruction is provided in the KMD. FCS_COP.1(d) Document data is encrypted using AES-CBC-256. FCS_KYC_EXT.1 A key chain consisting of a single key is used. Details of the key chain are provided in the ancillary Key Management Description document. The key chain supports DEK outputs of no fewer than 256 bits. FCS_RBG_EXT.1 An RBG function conforming to NIST SP 800-90A using CTR_DRBG(AES) is used to generate the 256-bit AES key for disk encryption. Entropy is provided by a hardware source that is described in more detail in the ancillary Entropy document. FDP_DSK_EXT.1 All document data is transparently encrypted. Disk encryption cannot be disabled. All document data is stored on the disk. FPT_KYP_EXT.1 Plaintext keys are not stored on the hard disk. Details of the key chain for the key are provided in the ancillary Key Management Description document. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 94 7.1.4 Trusted Communications During TOE installation, a 2048-bit self-signed certificate for the device is generated in accordance with NIST SP 800-56B Revision 1 (“Recommendation for Pair-Wise Key Establishment Schemes Using Integer Factorization Cryptography” for RSA- based key establishment schemes). IPSec with ESP operating in transport mode is required for all network datagram exchanges of any type with remote IT systems. This includes the following IT systems:  Workstations submitting print jobs  Workstations initiating connections to the web interface  Remote Syslog server  KDC  LDAP server (including Active Directory)  E-mail server  NTS IPSec provide confidentiality, integrity and authentication of the endpoints. Supported encryption options for ESP are AES-CBC-128 and AES-CBC-256. SHA-256 and SHA-384 are supported for HMACs. ISAKMP and IKEv1/v2 are used to establish the Security Association (SA) and session keys for the IPSec exchanges. For IKEv1, Main Mode is always used for Phase 1 exchanges (Aggressive Mode is never used). Diffie-Hellman is used for the IKE Key Derivation Function as specified in RFC2409, using Oakley Group 14. SA lifetimes for both IKEv1 and IKEv2 can be limited to separately configurable times for each phase: 1 to 24 hours for Phase 1, and 1 to 8 hours for Phase 2. When the TOE receives an IKE proposal, it selects the first proposed DH group that matches a DH group configured in the TOE (DH Group 14) and the negotiation will fail if there is no match. Similarly, when the TOE initiates the IKE protocol, a proposal is sent with all of the DH groups that are configured. The peer will select the first match from the IKE proposal against its configured DH groups; the negotiation fails if no match is found. Peer authentication is performed using the RSA algorithm and certificates and/or pre-shared keys. During the ISAKMP exchange, the TOE requires the remote IT system to provide a certificate and the RSA signature for it is validated, or text-based Pre-Shared Keys (PSKs) may be configured by administrators and validated between endpoints. PSKs configured in the system may be 1 to 256 characters in length, composed of the characters specified in FIA_PSK_EXT.1.2, and are conditioned using SHA-1 or SHA-256. The key size specified in the SA exchange may be 128 or 256 bits, the encryption algorithm is AES-CBC, and the Hash Authentication Algorithm is SHA-1, SHA-256, or SHA-384. If an incoming IP datagram does not use IPSec with ESP, the datagram is discarded. The Security Policy Database is dynamically built with an accept/protect rule for each of the configured pre-shared keys and certificates, permitting packets from the addresses associated with them, and a default “final rule” to discard all other traffic. Incoming packets are validated Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 95 against the SPD. Essentially incoming IP datagrams from authorized addresses (with PSKs or certificates) are accepted, and all other IP datagrams are discarded per the default final rule. If external accounts are defined, LDAP+GSSAPI is used for the exchanges with the LDAP server. Kerberos v5 is supported for exchanges with the LDAP server. All session keys are stored in dynamic RAM. Any copy of an RSA private key or PSK in RAM is destroyed when power is turned off. Section in 7.1.10 provides information concerning destruction of keys stored in flash memory. Table 22 - Trusted Communications SFR Details SFR Description FCS_CKM.1(a) A 2048-bit asymmetric key pair is generated in accordance with NIST SP 800- 56B during installation. FCS_CKM_EXT.4 Session keys are destroyed when sessions terminate. PSKs are destroyed when the PSKs are deleted from the configuration by an authorized administrator. FCS_CKM.4 Session keys are destroyed when power is removed. FCS_COP.1(a) IPsec traffic is encrypted using AES-CBC-128 or AES-CBC-256. FCS_COP.1(c) IPsec keyed-hash message authentication codes use hash algorithms supplied by the TOE. FCS_COP.1(g) IPsec uses keyed-hash message authentication codes that are authenticated by the TOE. FCS_IPSEC_EXT.1 IPsec is implemented as described in the text preceding this table. FCS_RBG_EXT.1 An RBG function conforming to NIST SP 800-90A using CTR_DRBG(AES) is used to generate the asymmetric key pair. Entropy is provided by a hardware source that is described in more detail in the ancillary Entropy document. FIA_PSK_EXT.1 Text-based PSKs are supported and conditioned using SHA-1 or SHA-256. FTP_ITC.1 Trusted channels using IPsec are supported for authentication servers, remote audit servers, network time servers and email servers. FTP_TRP.1(a) Trusted paths using IPsec are supported for administrators using the web interface. FTP_TRP.1(b) Trusted paths using IPsec are supported for users submitting print jobs. Table 23 - NIST SP800-56B Conformance Section # “should”, “should not”, or “shall not” Implemented accordingly? Rationale for deviation 5.6 should Yes n/a 5.8 shall not Yes n/a 5.9 shall not (first occurrence) Yes n/a 5.9 shall not (second occurrence) Yes n/a 6.1 should not Yes n/a 6.1 should (first occurrence) Yes n/a 6.1 should (second occurrence) Yes n/a 6.1 should (third occurrence) Yes n/a 6.1 should (fourth occurrence) Yes n/a Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 96 Section # “should”, “should not”, or “shall not” Implemented accordingly? Rationale for deviation 6.1 shall not (first occurrence) Yes n/a 6.1 shall not (second occurrence) Yes n/a 6.2.3 should Yes n/a 6.5.1 should Yes n/a 6.5.2 should Yes n/a 6.5.2.1 should Yes n/a 6.6 shall not Yes n/a 7.1.2 should Yes n/a 7.2.1.3 should Yes n/a 7.2.1.3 should not Yes n/a 7.2.2.3 should (first occurrence) Yes n/a 7.2.2.3 should (second occurrence) Yes n/a 7.2.2.3 should (third occurrence) Yes n/a 7.2.2.3 should (fourth occurrence) Yes n/a 7.2.2.3 should not Yes n/a 7.2.2.3 shall not Yes n/a 7.2.3.3 should (first occurrence) Yes n/a 7.2.3.3 should (second occurrence) Yes n/a 7.2.3.3 should (third occurrence) Yes n/a 7.2.3.3 should (fourth occurrence) Yes n/a 7.2.3.3 should (fifth occurrence) Yes n/a 7.2.3.3 should not Yes n/a 8 should Yes n/a 8.3.2 should not Yes n/a 7.1.5 Administrative Roles The TOE provides the ability for authorized administrators to manage TSF data from remote IT systems via a browser session or locally via the touch panel. Authorization is granular, enabling different administrators to be granted access to different TSF data. Authorized administrators (U.ADMIN) have one or more permissions to access management menus and/or functions. The individual permissions that administrators have determine what management functions (as defined in FMT_SMF.1) they may perform. The following table provides a correlation between functions and the required permission. Table 24 - Function Correspondence to Permissions Management Function Required Permission User management Security Menus Role management Security Menus Configuring identification and authentication Security Menus Configuring authorization and access controls Security Menus Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 97 Management Function Required Permission Configuring communication with External IT Entities Network/Ports Menu Configuring network communications Network/Ports Menu Configuring the system or network time source Network/Ports Menu Configuring data transmission to audit server Security Menus Configuring internal audit log storage Security Menus Configure applications Apps Configuration Perform firmware updates Firmware Updates Configure device functions Function Configuration Menus Sanitize device Out of Service Erase If defined users have no management permissions, they are considered to have the U.NORMAL role and have no access to management functions or data. When new users are defined, by default they have no associated groups, and therefore no access to management functions or job functions (restrictive default attributes). Neither the web interface nor the touch panel provide the ability to view the values of PSKs, symmetric keys or private keys for any administrator or user. Table 25 - Administrative Roles SFR Details SFR Description FMT_MOF.1 Administrators with the appropriate permissions have the ability to disable, enable and control the behavior of the specified functions. FMT_MSA.1 Only administrators with the Security Menus permission may query, modify, delete or create user accounts or groups. FMT_MSA.3 By default, new users have no group memberships and therefore restrictive permissions. FMT_MTD.1 Administrator operations on specific TSF data is determined by their permissions as described in Table 15 -. Users have no access to TSF data. FMT_SMF.1 Management functionality for the listed functions is provided to administrators as described in Table 24 -. FMT_SMR.1 Administrators have one or more permission related to management functionality. Users have job function permissions only. FPT_SKP_EXT.1 PSKs, symmetric keys and private keys are stored in flash. No mechanism is provided to read PSKs, symmetric keys or private keys. 7.1.6 Auditing The TOE generates audit event records for security-relevant events. The events that cause audit records to be generated are specified in section 6.1.1.1 . A time stamp is inserted into each record; reliable time is maintained via internal hardware or NTP. When NTP is used, it must be transmitted over IPsec (all communication with the TOE must use IPsec). A severity level is associated with each type of auditable event; only events at or below the severity level configured by an administrator are generated. Per the evaluated configuration, the severity level must be set to 5 (Notice). Audit records are stored internally as well as being sent to a configured remote syslog server. Communication with the remote syslog server uses the Syslog protocol with IPsec. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 98 Audit records for Successful Login events include the userid of the user as well as a session identifier. Other audit records include the session identifier, enabling the userid associated with other audit records to be determined via the corresponding Successful Login record. The time field in audit records is supplied by the TOE if internal time is configured by an administrator or by an NTP server if external time is configured. Audit records sent to the remote syslog server follow the syslog format defined in the Berkeley Software Distribution (BSD) Syslog Protocol (RFC 3164). The TOE supplies the PRI, HEADER, MSG/TAG, and MSG/CONTENT fields for all messages. The CONTENT portion may contain the following fields (in order, separated by commas):  Event Number  ISO 8601 time ([YYYY-MM-DD]T[hh:mm:ss])  Severity  Process (same as TAG)  Remote IPv4 address  Remote IPv6 address  Remote Hostname  Remote Port  Local Port  Authentication/Authorization method  Username  Setting ID  Setting’s old and new values  Event name  Event data Fields in the CONTENT section that are not relevant for specific events are blank. The remote IPv4 address, remote IPv6 address, remote hostname, remote port, and local port fields are always blank for events resulting from actions at the MFP (e.g. usage of the touch panel). Audit records are stored in the internal log as they are generated. If the internal audit log storage space usage reaches 98% of capacity, the oldest records are purged until used space is lowered to 80%. Using the web interface, administrator with the Security Menu permission may upload the audit log in syslog or CSV format to their remote system via the browser connection. The audit log is saved as a local file and may be reviewed by the administrator. These administrators may also clear (empty) the audit log. When this action is performed, an Audit Log Cleared record is generated to note this action. Audit records may not be modified. No users, or administrators without the Security Menu permission, may view, modify or delete audit records. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 99 Table 26 - Auditing SFR Details SFR Description FAU_GEN.1 Audit records are generated for the events and with the content specified in Table 12 -. Audit records are stored in an internal log and transmitted to a remote syslog server. Storage space allocated for internal audit log storage is 1 MB. FAU_GEN.2 Users can be associated with audit events performed by identified users. FAU_SAR.1 Administrators with the Security Menu permission may view the internal audit log via the web interface. FAU_SAR.2 Only Administrators with the Security Menu permission may view the internal audit log. FAU_STG.1 Only Administrators with the Security Menu permission may clear the internal audit log. No functionality is provided to modify audit records. FAU_STG.4 When internal audit log space is exhausted, the oldest records in the log are discarded. FAU_STG_EXT.1 Audit records are transmitted to a remote audit server via the syslog protocol over IPsec. FPT_STM.1 The TOE maintains a reliable time stamp via internal hardware or NTP. 7.1.7 Trusted Operation During initial start-up, the TOE performs self-tests on the cryptographic components. The following tests are performed during start-up:  Executable code integrity testing – A digital signature (RSA 2048, SHA256) of the executable code is calculated and compared to a saved value in flash.  Memory testing – Fixed values are written to memory and read back to ensure memory is functioning properly.  Processor testing – Basic arithmetic functions of the processor are verified.  Cryptographic algorithm testing – Uses Known Answer Tests (KATs) to verify proper operation of cryptographic functions. Executable code is distributed as Flash files (.FLS). A digital signature of the FLS file is calculated (RSA 2048 key and SHA256) by Lexmark when it is built and the signature is inserted into the FLS file. The signature of the file is verified before an update is applied. On each boot, the signature is also verified. During operation, a SHA256 hash is maintained for each executable page. Before any page is loaded into memory, the hash is verified to ensure the code has not been modified since boot. If any problems are detected with the hardware or stored TSF executable code, an appropriate error message is posted on the touch screen and operation is suspended. Administrators may use the web interface to query the current firmware version or supply firmware updates. Firmware updates must be digitally signed, and the TOE verifies the signature before applying the update. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 100 Table 27 - Trusted Operation SFR Details SFR Description FCS_COP.1(b) Digital signatures of update files are authenticated before being applied. FCS_COP.1(c) Digital signatures verification relies on hash algorithms supplied by the TOE. FPT_TST_EXT.1 A set of self-tests are executed at start-up to verify correct operation of the TOE. FPT_TUD_EXT.1 Administrators may use the web interface to query the current firmware version and supply signed updates. 7.1.8 PSTN Fax-Network Separation The Fax Separation security function assures that the information on the TOE, and the information on the network to which the TOE is attached, is not exposed through the phone line that provides connectivity for the fax function. This function assures that only printable documents are accepted via incoming fax connections, and that the only thing transmitted over an outgoing fax connection (in the evaluated configuration) is a document that was scanned for faxing. Use cases of sending and receiving PSTN faxes are supported. Sending a PSTN fax involves a user scanning a document and sending that image via the PSTN interface. Receiving a fax involves receipt of an image from the PSTN interface and saving it until faxes are released by an authorized administrator. When released, the saved images are printed. The only source for outgoing fax transmissions is the scanner. Control of the fax functionality is incorporated directly into the TOE’s firmware. The modem chip (Conexant CX95110-53Z) is in a mode that is more restrictive than Class 1 mode (the fax modem will not answer a data call), and relies on the TOE firmware for composition and transmission of fax data. The TOE firmware explicitly disallows the transmission of frames in data mode and allows for the sending and receiving of facsimile jobs only. There is no mechanism by which telnet, FTP, or other network protocols can be used over the analog fax line. The fax modem is on a separate card from the network adapter to provide separation between the interfaces and is only capable of sending and receiving fax data. The modem and the network adapter are incapable of communicating directly with one another. The modem is designed only for fax communications (T.4 and T.30), thus preventing any type of remote configuration or management of the TOE over the fax line. Table 28 - PSTN Fax-Network Separation SFR Details SFR Description FDP_FXS_EXT.1 The fax interface is separated from the network interface. 7.1.9 Data Clearing and Purging Once a job has been completed, the document file is logically deleted and marked as needing to be wiped. Until the wiping occurs, the disk blocks containing the files are not available for use by any user. Every 5 seconds, the TOE checks to see if any “deleted” files are present and begins the disk wiping process. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 101 The TOE overwrites each block associated with each deleted file (including bad and remapped sectors) three times: first with “0x0F” (i.e. 0000 1111), then with “0xF0” (i.e. 1111 0000), and finally with a block of random data (supplied by the internal random number generator). Each time that the device wipes a different file, it selects a different block of random data. Once the disk wiping is complete, the disk blocks used for the deleted files are once again available for use by the system. If the disk wiping process is interrupted by a power cycle or reset, the status is remembered across the restart and the process resumes when operation resumes. If any error occurs during the disk wiping process, an audit record is generated and the file system is considered to be corrupt and must be re-initialized. The TOE also overwrites RAM with a fixed pattern upon deallocation of any buffer used to hold user data or sensitive TSF data such as keying material. An administrator may command the TOE to be sanitized (e.g. prepared for decommissioning). For this operation, the disk is sanitized as described above, and all flash configuration data is zeroized. Table 29 - Data Clearing and Purging SFR Details SFR Description FDP_RIP.1(a) Document data is overwritten when the file or memory containing the data is released. FDP_RIP.1(b) When purging is commanded by an administrator, the disk and flash storage is zeroized. 7.1.10 Common Functionality Regarding Key Destruction in Flash Memory Multiple types of keys are stored in flash memory: RSA private keys, PSKs, and the disk encryption key. The flash component performs wear leveling/garbage collection; therefore, physical copies of these keys may continue to exist inside the flash component for some period of time after they have been “overwritten” by the software. When any of these keys are destroyed, they are first overwritten in flash memory with zeroes. Therefore, the visible storage locations for these items from the flash component reflect the overwrites. The flash component supports the TRIM command and implements garbage collection to destroy the persistent copies of the old storage locations when not actively engaged in other tasks. The file system that maps to the flash component, and on which these keys are stored, also supports the TRIM command and the file system is configured to use it. 7.1.11 CAVP Certificates The following CAVP certificates apply to this evaluation. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 102 Table 30 - CAVP Certificates Crypto Function CAVP Certificate #s Associated SFRs AES (CBC) A2315, A2309 (88PA6270 (G2)-32bit) A2315, A2309 (88PA6270 (G2)-64bit) A2315, A2309 (MV78460 (A)-32bit) FCS_COP.1(a) FCS_COP.1(d) FCS_IPSEC_EXT.1 FDP_DSK_EXT.1 DRBG (CTR_DRBG(AES)) A2315, A2309 (88PA6270 (G2)-32bit) A2315, A2309 (88PA6270 (G2)-64bit) A2315, A2309 (MV78460 (A)-32bit) FCS_CKM.1(b) FCS_RBG_EXT.1 HMAC A2315, A2309 (88PA6270 (G2)-32bit) A2315, A2309 (88PA6270 (G2)-64bit) A2315, A2309 (MV78460 (A)-32bit) FCS_COP.1(g) FCS_IPSEC_EXT.1 RSA A2315, A2309 (88PA6270 (G2)-32bit) A2315, A2309 (88PA6270 (G2)-64bit) A2315, A2309 (MV78460 (A)-32bit) FCS_CKM.1(a) FCS_COP.1(b) SHA A2315, A2309 (88PA6270 (G2)-32bit) A2315, A2309 (88PA6270 (G2)-64bit) A2315, A2309 (MV78460 (A)-32bit) FCS_COP.1(c) FCS_IPSEC_EXT.1 CVL (IKEv1, IKEv2) A2315, A2309 (88PA6270 (G2)-32bit) A2315, A2309 (88PA6270 (G2)-64bit) A2315, A2309 (MV78460 (A)-32bit) FCS_IPSEC_EXT.1 Users can verify the CAVP certificates by comparing the Lexmark module version listed in the certificate with the module version displayed when an administrator selects “device information” from the touch panel. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 103 8. Rationale 8.1 Security Requirements Rationale 8.1.1 Rationale for Security Functional Requirements of the TOE Objectives The following information is copied from [HCD]. Table 31 - Security Functional Requirements Rationale Objective / SFR Relationship Rationale O.ACCESS_CONTROL - The TOE shall enforce access controls to protect User Data and TSF Data in accordance with security policies. FDP_ACC.1 Satisfies This SFR defines the access control policy that is used to protect access to User Data and TSF Data. FDP_ACF.1 Satisfies This SFR defines the specific rule-set that constitutes the access control policy, identifying the conditions under which access to resources, functions, and data are authorized or denied.” FMT_MSA.1 Supports The management of the product configuration, security settings, and user attributes and authorizations is critical to maintaining operational security. These management functions, as a group, provide for the ability of authorized administrators to configure the system, add and delete users, grant user-specific authorizations to system data, resources, and functions, introduce code (e.g., updates) into the system, and assign users to roles. Additionally, the SFRs also require that management functions be limited to users who have been explicitly authorized to perform management functions. FMT_MSA.3 Supports FMT_MTD.1 Supports FMT_SMF.1 Supports FMT_SMR.1 Supports O.ADMIN_ROLES - The TOE shall ensure that only authorized Administrators are permitted to perform administrator functions. FIA_UID.1 Supports This SFR defines the TOE management functions that can be accessed without requiring Administrator authorization. FMT_MOF.1 Satisfies This SFR defines the authorizations that are required for Administrators to access TOE functions. FMT_SMF.1 Satisfies This SFR defines the administrative functions that are provided by the TSF. FMT_SMR.1 Satisfies This SFR defines the different roles that can be assigned to Administrators for the purposes of determining authentication and authorization. O.COMMS_PROTECTION - The TOE shall have the capability to protect LAN communications of User Data and TSF Data from Unauthorized Access, replay, and source/destination spoofing. FCS_CKM.1(a) Satisfies This SFR defines the use of secure algorithms for key pair generation that can be used for key transport during protected communications. FCS_CKM.1(b) Satisfies This SFR defines the use of secure algorithms for key generation that can be used for protection communications. FCS_CKM.4 Supports This SFR defines the method of data erasure used by FCS that provides assurance that cryptographic keys that need to be erased cannot be recovered. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 104 Objective / SFR Relationship Rationale FCS_CKM_EXT.4 Supports This SFR ensures that residual cryptographic data cannot be used to compromise protected communications. FCS_COP.1(a) Satisfies This SFR defines the use of a secure symmetric key algorithm that can be used for protected communications. FCS_COP.1(g) Selection This SFR defines the use of a secure HMAC algorithm that can be used for protected communications. FCS_IPSEC_EXT.1 Selection This SFR defines secure communications protocols that can be used to protect the transmission of security- relevant data. FCS_RBG_EXT.1 Supports This SFR supports protected communications by defining a secure method of random bit generation that allows cryptographic functions to operate with their theoretical maximum strengths. FIA_PSK_EXT.1 Selection This SFR defines the use of pre-shared keys in IPsec which allows for the secure implementation of that protocol. FPT_SKP_EXT.1 Satisfies This SFR prevents the compromise of protected communications by ensuring that secret cryptographic data is protected against unauthorized access. FTP_ITC.1 Satisfies This SFR defines the interfaces over which protected communications are required and the methods used to protect the communications used to transit those interfaces. FTP_TRP.1(a) Satisfies This SFR defines the protected communications path that is used to secure Administrator interaction with the TOE. FTP_TRP.1(b) Satisfies This SFR defines the protected communications path that is used to secure user interaction with the TOE. O.FAX_NET_SEPARATION - If the TOE provides a PSTN fax function, then the TOE shall ensure separation of the PSTN fax telephone line and the LAN, by system design or active security function. FDP_FXS_EXT.1 Satisfies This SFR enforces separation of the fax interface by preventing the use of this interface for all non-fax communications. O.IMAGE_OVERWRITE - Upon completion or cancellation of a Document Processing job, the TOE shall overwrite residual image data from its Field-Replaceable Nonvolatile Storage Devices. FDP_RIP.1(a) Satisfies This SFR defines the ability of the TSF to overwrite user document data upon its deallocation. O.KEY_MATERIAL - The TOE shall protect from unauthorized access any cleartext keys, submasks, random numbers, or other values that contribute to the creation of encryption keys for storage of User Document Data or Confidential TSF Data in Field- Replaceable Nonvolatile Storage Devices; The TOE shall ensure that such key material is not stored in cleartext on the storage device that uses that material. FPT_KYP_EXT.1 Satisfies This SFR defines the ability of the TSF from storing unprotected key data in insecure locations. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 105 Objective / SFR Relationship Rationale O.PURGE_DATA - The TOE provides a function that an authorized administrator can invoke to make all customer-supplied User Data and TSF Data permanently irretrievable from Nonvolatile Storage Devices. FCS_CKM.4 Satisfies This SFR defines the physical mechanism used to accomplish the data purge defined by FCS_CKM_EXT.4. FCS_CKM_EXT.4 Satisfies This SFR defines the ability of the TSF to purge data from storage. FDP_RIP.1(b) Satisfies This SFR requires the TSF to purge all User Data and TSF Data as part of the decommissioning process. O.STORAGE_ENCRYPTION - If the TOE stores User Document Data or Confidential TSF Data in Field-Replaceable Nonvolatile Storage devices, then the TOE shall encrypt such data on those devices. FCS_CKM.1(b) Selection This SFR defines the use of secure algorithms for key generation that can be used for storage encryption. FCS_CKM.4 Supports This SFR helps define the requirements for the proper destruction of cryptographic keys in order to ensure that stored data is unrecoverable should the storage device(s) be separated from the TOE. FCS_CKM_EXT.4 Supports This SFR helps define the requirements for the proper destruction of cryptographic keys in order to ensure that stored data is unrecoverable should the storage device(s) be separated from the TOE. FCS_COP.1(d) Supports This SFR defines the data encryption algorithm used to protect stored data. FCS_KYC_EXT.1 Satisfies This SFR defines the key chaining method used by the TOE to provide multiple layers of security for key material. FCS_RBG_EXT.1 Supports This SFR defines the random bit generation algorithm used to ensure that the TOE’s cryptographic algorithms function with the theoretical maximum level of security. FDP_DSK_EXT.1 Satisfies This SFR requires the TSF to encrypt the data that is stored to disk. O.AUDIT - The TOE shall generate audit data, and be capable of sending it to a trusted External IT Entity. Optionally, it may store audit data in the TOE. FAU_GEN.1 Satisfies This SFR defines the auditable events for which the TOE generates audit data and the fields that are included in each audit record. FAU_GEN.2 Satisfies This SFR defines the ability of the TOE to apply attribution to all activities performed by a user or Administrator. FAU_SAR.1 Option This SFR defines the ability of Administrators to read audit data that is stored on the TOE. FAU_SAR.2 Option This SFR protects stored audit data from unauthorized access. FAU_STG.1 Option This SFR ensures that audit data cannot be modified by untrusted subjects. Lexmark Multi-Function Printers with TMP, Fax, and Hard Drive Security Target 106 Objective / SFR Relationship Rationale FAU_STG.4 Option This SFR ensures the availability of audit data by taking automatic action in the event the audit storage space is exhausted. FAU_STG_EXT.1 Satisfies This SFR defines the ability of the TSF to transmit generated audit data to an external entity using a protected channel FPT_STM.1 Supports This SFR ensures that audit data is labeled with accurate timestamps. FTP_ITC.1 Supports This SFR defines the protected communications channel(s) over which audit data can be transmitted. O.TSF_SELF_TEST - The TOE shall test some subset of its security functionality to help ensure that subset is operating properly. FPT_TST_EXT.1 Satisfies This SFR defines the ability of the TSF to perform self- tests which assert the security properties of the TOE. O.UPDATE_VERIFICATION - The TOE shall provide mechanisms to verify the authenticity of software updates. FCS_COP.1(b) Selection This SFR defines the digital signature service(s) used to verify the authenticity TOE updates. FCS_COP.1(c) Selection This SFR defines the hashing algorithm(s) used to verify the integrity of TOE updates. FPT_TUD_EXT.1 Satisfies This SFR defines the ability of the TOE to be updated and the method(s) by which the updates are known to be trusted. O.USER_AUTHORIZATION - The TOE shall perform authorization of Users in accordance with security policies. FDP_ACC.1 Supports This SFR enforces User Access Control SFP on subjects, objects, and operations in accordance with user authorization. FDP_ACF.1 Supports This SFR enforces the User Access Control SFP to objects based on attributes in accordance with user authorization. FIA_ATD.1 Supports This SFR defines the attributes that are associated with Users that can be used to define their authorizations. FMT_MSA.1 Satisfies This SFR defines the authorizations that are required to access data that is protected by the TSF. FMT_MSA.3 Satisfies This SFR defines the default security posture for enforcement of the access control policy that governs access to data that is protected by the TSF. FMT_SMF.1 Satisfies This SFR defines the management functions provided by the TOE that can be used to define User authorizations. FMT_SMR.1 Satisfies This SFR defines administrative roles that can be used to define authorizations to groups of Users. O.USER_I&A - The TOE shall perform identification and authentication of Users for operations that require access control, User authorization, or Administrator roles. FIA_AFL.1 Supports This SFR protects the authentication function by limiting the number of unauthorized authentication attempts that can be made, thereby reducing the likelihood of impersonation. Lexmark Multi-Function Printers with TPM, Fax, and Hard Drives Security Target 107 Objective / SFR Relationship Rationale FIA_PMG_EXT.1 Satisfies This SFR protects the authentication function by providing for strong credentials that are difficult to guess or derive. FIA_UAU.1 Satisfies This SFR defines the TOE functions that can be performed without authentication and the functions that require authentication for use. FIA_UAU.7 Satisfies This SFR protects the authentication function by hiding the authentication credential as it is being input. FIA_UID.1 Satisfies This SFR defines the TOE functions that can be performed without identification and the functions that require identification for use. FIA_USB.1 Satisfies This requirement provides assurance that an identified user is associated with attributes that govern their authorizations to the TSF upon successful authentication to the TOE. FTA_SSL.3 Satisfies This SFR helps prevent User or Administrator impersonation by terminating unattended sessions.