Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 1 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Target
Mobile PayPass 1.0 on Orange NFC V2 G1
with or without MIFARE ACTIVATED
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 2 / 133
No disclosure to a third party without prior written consent of Gemalto
Table of Contents
1 INTRODUCTION.................................................................................................... 7
1.1 ST REFERENCE................................................................................................................. 7
1.2 TOE REFERENCE .............................................................................................................. 7
1.3 REFERENCE MATERIALS...................................................................................................... 8
1.4 DEFINITIONS..................................................................................................................10
1.5 ACRONYMS AND ABBREVIATIONS .........................................................................................11
1.6 TOE OVERVIEW ..............................................................................................................13
1.6.1 TOE type ..............................................................................................................13
1.6.2 Usage and major security features of the TOE ........................................................14
1.6.2.1 Mode 1: PIN – TAP............................................................................................16
1.6.2.2 Mode 2: TAP – PIN – TAP: ................................................................................16
1.6.2.3 Security features ...............................................................................................17
1.6.3 Required non-TOE hardware/software/firmware .....................................................17
1.6.3.1 Payez Mobile Application (AEPM CREL Application) ...........................................18
1.6.3.2 Proximity Payment System Environment (PPSE) application (EMVCo CREL
Application)........................................................................................................................18
1.6.3.3 Payment Bridge application................................................................................18
1.6.3.4 Bank TSM.........................................................................................................19
1.6.3.5 UICC Management Platform ..............................................................................19
1.6.3.6 Bank GUI Management Platform ........................................................................19
1.6.3.7 POS terminal ....................................................................................................19
1.6.3.8 POS Application................................................................................................19
1.6.3.9 Mobile Handset .................................................................................................19
1.6.3.10 Bank GUI..........................................................................................................19
1.6.3.11 MNO GUI..........................................................................................................20
1.6.3.12 OTA Platform ....................................................................................................20
1.7 TOE DESCRIPTION ..........................................................................................................20
1.7.1 Physical scope of the TOE: all hardware, firmware, software and guidance...............20
1.7.1.1 Payment Application Package (PAP) ..................................................................23
1.7.2 Logical scope of the TOE: the logical security features offered by the TOE ...............24
1.7.2.1 Contactless Availability ......................................................................................24
1.7.2.2 Script Processing Module ..................................................................................24
1.7.2.3 Counters Management ......................................................................................25
1.7.2.4 Counter Reset Processing Module .....................................................................25
1.7.2.5 Transaction Log Module ....................................................................................25
1.7.2.6 Detect GUI Presence Module.............................................................................25
1.7.2.7 HCI Events Manager Module .............................................................................25
1.7.2.8 Over-The-Air (OTA) Capabilities.........................................................................25
1.7.3 Overview of the TOE Life Cycle ..............................................................................26
1.7.3.1 TOE role and environment .................................................................................27
1.7.4 PAP on-card life cycle ............................................................................................28
1.7.4.1 Contactless life cycle .........................................................................................28
1.7.4.2 GP standard life cycle........................................................................................29
1.7.5 Configurations ......................................................................................................30
2 CONFORMANCE CLAIM....................................................................................... 32
2.1 CC CONFORMANCE CLAIM ..................................................................................................32
2.2 PP AND PACKAGE CLAIM....................................................................................................32
3 STATEMENT OF COMPATIBILITY........................................................................ 33
3.1 COMPATIBILITY OF THREATS...............................................................................................34
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 3 / 133
No disclosure to a third party without prior written consent of Gemalto
3.2 COMPATIBILITY OF OSP....................................................................................................36
3.3 COMPATIBILITY OF ASSUMPTIONS ........................................................................................40
3.4 COMPATIBILITY OF TOE SECURITY OBJECTIVES .......................................................................41
3.5 COMPATIBILITY OF SECURITY OBJECTIVES FOR THE ENVIRONMENT................................................45
3.6 COMPATIBILITY OF SECURITY FUNCTIONAL REQUIREMENTS .........................................................48
3.7 COMPATIBILITY OF SECURITY FUNCTIONAL REQUIREMENTS FOR THE ENVIRONMENT...........................51
3.8 COMPATIBILITY OF ASSURANCE REQUIREMENTS .......................................................................51
4 SECURITY PROBLEM DEFINITION ..................................................................... 52
4.1 ASSETS.........................................................................................................................52
4.1.1 User data .............................................................................................................52
4.1.2 TSF data...............................................................................................................53
4.1.2.1 TRANSACTION MANAGEMENT DATA...................................................................53
4.1.2.2 TEMPORARY TRANSACTION DATA .....................................................................53
4.2 USERS / SUBJECTS...........................................................................................................54
4.2.1 USERS..................................................................................................................54
4.2.2 SUBJECTS.............................................................................................................54
4.3 THREATS.......................................................................................................................55
4.3.1 DISCLOSURE ........................................................................................................55
4.3.2 INTEGRITY...........................................................................................................55
4.3.3 FRAUDULENT PAYMENT ........................................................................................56
4.3.4 DENIAL-OF-SERVICE.............................................................................................57
4.3.5 IDENTITY_USURPATION .......................................................................................57
4.4 ORGANISATIONAL SECURITY POLICIES ..................................................................................58
4.4.1 HANDSET .............................................................................................................58
4.4.2 MANAGEMENT ......................................................................................................58
4.4.3 MERCHANT...........................................................................................................59
4.4.4 BANK ...................................................................................................................59
4.5 ASSUMPTIONS ................................................................................................................59
5 SECURITY OBJECTIVES ...................................................................................... 60
5.1 SECURITY OBJECTIVES FOR THE TOE ...................................................................................60
5.1.1 TRANSACTION PROTECTION.................................................................................60
5.1.2 AUTHENTICATION ................................................................................................60
5.1.3 EXECUTION PROTECTION .....................................................................................60
5.1.4 DATA PROTECTION ..............................................................................................61
5.1.5 RISK MANAGEMENT..............................................................................................61
5.1.6 GUI......................................................................................................................62
5.2 SECURITY OBJECTIVES FOR THE OPERATIONAL ENVIRONMENT.....................................................62
5.2.1 HANDSET .............................................................................................................62
5.2.2 MERCHANT...........................................................................................................63
5.2.3 MANAGEMENT ......................................................................................................63
5.2.4 BANK ...................................................................................................................64
5.3 SECURITY OBJECTIVES RATIONALE.......................................................................................64
5.3.1 Threats ................................................................................................................64
5.3.1.1 DISCLOSURE.....................................................................................................64
5.3.1.2 INTEGRITY........................................................................................................64
5.3.1.3 FRAUDULENT PAYMENT.....................................................................................66
5.3.1.4 DENIAL-OF-SERVICE..........................................................................................68
5.3.1.5 IDENTITY_USURPATION....................................................................................69
5.3.2 Organisational Security Policies ..............................................................................69
5.3.2.1 HANDSET..........................................................................................................69
5.3.2.2 MANAGEMENT...................................................................................................69
5.3.2.3 MERCHANT .......................................................................................................70
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 4 / 133
No disclosure to a third party without prior written consent of Gemalto
5.3.2.4 BANK ................................................................................................................70
5.3.3 Assumptions .........................................................................................................71
5.3.4 SPD and Security Objectives ..................................................................................71
6 SECURITY REQUIREMENTS ................................................................................ 78
6.1 SECURITY FUNCTIONAL REQUIREMENTS ................................................................................78
6.1.1 ACCESS CONTROL POLICY ....................................................................................80
6.1.2 ACCESS CONTROL FUNCTIONS..............................................................................83
6.1.3 INFORMATION FLOW CONTROL POLICY ................................................................89
6.1.4 SECURITY AUDIT..................................................................................................94
6.1.5 CRYPTOGRAPHIC SUPPORT...................................................................................95
6.1.6 PROTECTION........................................................................................................97
6.1.7 MANAGEMENT ......................................................................................................98
6.1.8 IDENTIFICATION / AUTHENTIFICATION ..............................................................100
6.1.9 ACCESS and INFORMATION FLOW CONTROL SFP.................................................104
6.1.10 SECURE CHANNEL ..............................................................................................105
6.1.11 UNOBSERVABILITY .............................................................................................106
6.2 SECURITY ASSURANCE REQUIREMENTS................................................................................106
6.3 SECURITY REQUIREMENTS RATIONALE ................................................................................107
6.3.1 Objectives ..........................................................................................................107
6.3.1.1 Security Objectives for the TOE ........................................................................107
6.3.2 Rationale tables of Security Objectives and SFRs...................................................113
6.3.3 Dependencies .....................................................................................................126
6.3.3.1 SFRs Dependencies..........................................................................................126
6.3.3.2 SARs Dependencies .........................................................................................130
6.3.4 Rationale for the Security Assurance Requirements ...............................................131
6.3.5 ALC_DVS.2 Sufficiency of security measures .........................................................131
6.3.6 AVA_VAN.5 Advanced methodical vulnerability analysis .........................................131
7 TOE SUMMARY SPECIFICATION....................................................................... 132
7.1 SECURITY FUNCTIONS.....................................................................................................132
7.2 ASSURANCE MEASURES....................................................................................................133
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 5 / 133
No disclosure to a third party without prior written consent of Gemalto
Table of Figures
Figure 1: TOE type.......................................................................................................................14
Figure 2: Mode 1: PIN - TAP.........................................................................................................16
Figure 3: Mode 2 - TAP - PIN – TAP..............................................................................................17
Figure 4: TOE physical scope like in [PAP] ....................................................................................20
Figure 5: TOE logical boundaries ..................................................................................................21
Figure 6: Major TOE items and scope............................................................................................22
Figure 7: PAP Module ..................................................................................................................24
Figure 8: TOE life cycle ................................................................................................................26
Figure 9: Contactless life cycle states............................................................................................29
Figure 10: GP standard life cycle states.........................................................................................30
Figure 11: Conformance and Composition......................................................................................33
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 6 / 133
No disclosure to a third party without prior written consent of Gemalto
Table of Tables
Table 1: Compatibility of threats....................................................................................................35
Table 2: Compatibility of OSP........................................................................................................39
Table 3: Compatibility of assumptions............................................................................................40
Table 4: Compatibility of TOE security objectives............................................................................44
Table 5: Compatibility of security objectives for the environment ....................................................47
Table 6: Compatibility of security functional requirements...............................................................51
Table 7: Threats and Security Objectives - Coverage ......................................................................72
Table 8: Security Objectives and Threats - Coverage ......................................................................74
Table 9: OSPs and Security Objectives - Coverage..........................................................................75
Table 10: Security Objectives and OSPs - Coverage........................................................................76
Table 11: Assumptions and Security Objectives for the Operational Environment - Coverage ............77
Table 12: Security Objectives for the Operational Environment and Assumptions - Coverage ............77
Table 13: Security Objectives and SFRs - Coverage ......................................................................118
Table 14: SFRs and Security Objectives .......................................................................................125
Table 15: SFRs Dependencies .....................................................................................................129
Table 16: SARs Dependencies .....................................................................................................131
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 7 / 133
No disclosure to a third party without prior written consent of Gemalto
1 Introduction
This document written from the AEPM’s Guidance for Payment Application Package Security Target
[PAP], provides a list of security requirements for a Payment Application Package (PAP) embedded in
a (U)SIM card as specified in [PM] specifications.
This document is the Security Target for the Mobile PayPass 1.0 on Orange NFC V2 G1 with or
without MIFARE ACTIVATED, a Gemalto specific implementation of a TOE. This Product-specific fulfills
the generic security requirements given in this security target in order to ensure End users, Orange
Mobile Network Operator (MNO) and Issuing Banks trust.
1.1 ST reference
Title:
Mobile PayPass 1.0 on Orange NFC V2 G1 with or without
MIFARE ACTIVATED - Security Target
Reference: R0R21486_001_CCD_ASE
Version: 2.04p
Date of Issue: July 25th, 2013
Author: Gemalto
ITSEF: THALES CEACI
Certification Body: ANSSI
CC Version: CC 3.1 revision 3
Status: Release
This Security Target describes:
 The Target of Evaluation (TOE
 The assets to be protected, the threats to be countered by the TOE itself during the usage of
the TOE,
 The organizational security policies, and the assumptions,
 The security objectives for the TOE and its environment,
 The security functional requirements for the TOE and its IT environment,
 The TOE security assurance requirements,
 The security functions and associated rationales.
1.2 TOE reference
TOE is the composition of applet on (U)SIM platform.
Developer’s name: Gemalto
Product name:
Mobile PayPass 1.0 on Orange NFC v2 G1 with or without
MIFARE ACTIVATED
Product version: Release B
Name of applet: Mobile PayPass v1.0
Reference of applet: S1109398
Version of applet: Release A
Name of (U)SIM platform: Orange NFC V2 G1 platform using ST33F1M
Reference of (U)SIM platform: S1105439
Version of (U)SIM platform: Release B
And its guidances
Guidance of applet: [GUIDE]
Guidance of (U)SIM platform: [NFC-GUIDE]
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 8 / 133
No disclosure to a third party without prior written consent of Gemalto
1.3 Reference Materials
Please refer to Part I: “Product Definition” [PM-1] – Section 2.4.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 9 / 133
No disclosure to a third party without prior written consent of Gemalto
References Description
[PM-1] Part I: Product Definition v1.0 – April 2011
[PM-2] Part II: Technical Specification v1.0 – April 2011
[PM-3] Security Guidelines for Standard Operational Environment v1.0 – June 2009
[PM-6] Payez Mobile MasterCard Implementation Guide – April 2011
[PP USIM]
(U)SIM Java Card Platform Protection Profile Basic Configuration
V2.0.2, June 2010
[PP JCS]
Java Card™ System Protection Profile “Open Configuration”
Version 2.6
[GP] Global Platform 2.2, Specification GP
[GP-CCCM]
GlobalPlatform Card - Confidential Card Content Management, Card specification
v2.2 – Amendment A. Version 1.0.1. October2007
[GP-4] GlobalPlatform Card Specification 2.2 - UICC Configuration v1.0
[GP-5] GlobalPlatform Card – Amendment C v1.0.
[PAP]
Guidance for Payment Application Package to write Security Target
AEPM, ref: CP-2011-RT-407 / Version 1.0.2
[CC1]
Common Criteria for Information Technology Security Evaluation, Part 1: Introduction
and general model. Version 3.1. Revision 3. July 2009. CCMB-2009-07-001.
[CC2]
Common Criteria for Information Technology Security Evaluation, Part 2: Security
functional requirements. Version 3.1. Revision 3. July. CCMB-2009-07-002.
[CC3]
Common Criteria for Information Technology Security Evaluation, Part 3: Security
assurance requirements. Version 3.1. Revision 3. July 2009. CCMB-2009-07-003.
[CEM]
Common Methodology for Information Technology Security Evaluation, Evaluation
Methodology. Version 3.1. July 2009. CCMB-2009-07-004.
[CPESC]
CCDB, Composite product evaluation for Smart Cards and similar devices,
September 2007, Version 1.0 - Revision 1, September 2007, CCDB-2007-09-001
[MC-PayPass]
Mobile MasterCard PayPass – Mchip4 v1.0 April 2010MasterCard - PayPass M/CHIP
– version 13, September 2005
[DCSSI2741]
Règles et recommandations concernant le choix et le dimensionnement des
mécanismes cryptographiques de niveau de robustesse standard
N° 2741/SGDN/DCSSI/SDS/LCR Version 1.10
[GUIDE]
- Mobile Paypass 1.0 on NFC V2 G1 Preparation Guidance.
Ref: R0R21486_009_CCD_AGD-PRE (2.04).
- Mobile Paypass 1.0 on NFC V2 G1 Guidance for administration.
Ref: R0R21486_008_CCD_AGD-OPE (2.04).
- Mobile MasterCard Paypass Card Applications V1.0, Installation Guide
Ref: D2148603 ( MobilePayPassInstallGuide.pdf)
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 10 / 133
No disclosure to a third party without prior written consent of Gemalto
References Description
- Mobile MasterCard Paypass Card Applications V1.0, Administration Guide
Ref: D2148601 (MobilePayPassAdminGuide.pdf)
- Mobile MasterCard Paypass Card Applications V1.0, Developing Client
Applications Guide
Ref: D2148602 (MobilePayPassDevClientAppsGuide.pdf)
[NFC-ST]
Orange NFC V2 G1 card Security Target.
Ref: D1226479p (1.6p).
[NFC-GUIDE]
- Orange NFC V2 G1 card Preparation Guidance
Ref: PRE_D1226480 (1.3)
- Orange NFC V2 G1 card Guidance for Administration.
Ref: OPE_D1226483 (1.61b)
- Guidance for Verification Authority of Orange NFC V2 G1 card.
Ref: OPE_D1226483v (1.5)
- Rules for applications on a Upteq M-NFC certified product
Ref: D1186227 (A09.2)
- Guidance_for_secure_application_development_on_Upteq_mNFC
Ref: D1188231 (A07)
- UpTeq Card Architecture Guide with GP2.2
Ref: D1189324
- UpTeq Card APDU Guide
Ref: D1189337
- UpTeq Applet Development Guide
Ref: D1110140
- Connection Over CAT_TP/BIP v2.0.1 Technical Specifications Guide
Ref: D1111478
- UpTeq_OTA Messaging Guide
Ref: D1172819
- UpTeq m-NFC 2.0_User's Guide
Ref: D1187335
1.4 Definitions
Please refer to Part I: “Product Definition” [PM-1] – Section 2.5.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 11 / 133
No disclosure to a third party without prior written consent of Gemalto
1.5 Acronyms and Abbreviations
Please refer to Part I: “Product Definition” [PM-1] – Section 2.6.
Abbreviations Meaning
AAC Application Authentication Cryptogram
AFL Application File Locator
AID Application Identifier
APDU Application Protocol Data Unit
API Application Programming Interface
ARPC Authorisation Response Cryptogram (within a transaction)
ARQC Authorisation Request Cryptogram (within a transaction)
ATC Application Transaction Counter
CAS Common Approval Scheme
CC Common Criteria
CDOL Card risk management Data Object List
CEM Common Evaluation Methodology
CVM Card Verification Method
CVR Card Verification Results
DDA Dynamic Data Authentication
DDOL Dynamic Data Object List
EAL Evaluation Assurance Level
EMV Europay MasterCard Visa
ETR_COMP Report for a composite Smart Card Evaluation
GP Global Platform
IC Integrated Circuit
IT Information Technology
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 12 / 133
No disclosure to a third party without prior written consent of Gemalto
Abbreviations Meaning
JCS Java Card System
JSR Java Specification Request
MMI Man Machine Interface
MNO Mobile Network Operator
NFC Near Field Communication
OS Operating system
OSP Organizational Security Policy
OTA Over The Air
PAN Primary Account Number
PAP Payment Application Package
PC Personal Code
PIN Personal Identification Number
POS Point Of Sale
PP Protection Profile
RSA Rivest Shamir Adleman
SIM Subscriber Identity Module
ST Security Target
TOE Target Of Evaluation
TSM Trusted Service Manager
TSF TOE Security Functions
USIM Universal Subscriber Identity Module
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 13 / 133
No disclosure to a third party without prior written consent of Gemalto
1.6 TOE overview
This section briefly describes the usage of the TOE and its major security features, identifies the TOE
type and any non-TOE hardware/software/firmware required by the TOE.
1.6.1 TOE type
The product to be evaluated is Gemalto Mobile PayPass 1.0 on Orange NFC V2 G1 with/without
MIFARE ACTIVATED (U)SIM card intended to be plugged in a mobile handset to provide secure
payment services to an end user (see Figure 1).
The TOE is composed of the following bricks:
 A Gemalto Orange NFC V2 G1 (U)SIM Java Card platform certified conformant to [PP USIM]
which is a piece of software (OS, Java Card System, (U)SIM APIs, …) embedded in an
STMicroelectronics ST33F1M Integrated Circuit (IC). It shall be compliant with GlobalPlatform
UICC
1
Configuration [GP-4] and GlobalPlatform Card Specification v2.2 [GP] including the
extended ProcessData method as defined in Confidential Card Content Management (GP2.2
Card Specification v2.2 - Amendment A [GP-CCCM]). The (U)SIM also implements the
mechanisms defined in GlobalPlatform Amendment C [GP-5].
 A Gemalto Mobile PayPass v1.0 Payment Application Package2
(PAP) compliant with [PM-1],
[PM-2] and [PM-6].
1
UICC stands for a (U)SIM card
2
The term package doesn’t correspond to the package in Java world but means the contactless mobile payment
application
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 14 / 133
No disclosure to a third party without prior written consent of Gemalto
Figure 1: TOE type
The PAP application shall be compliant to the MasterCard [PM-6] Payez Mobile Implementation
Guide.
For MasterCard, PAP is composed of:
 the Contactless Mobile Payment application or CMP application, defined section 1.7.1.1;
 the Payez Mobile Customization Package.
1.6.2 Usage and major security features of the TOE
Refer to the §1.3.2 of [NFC-ST] for usage of the platform.
Payez Mobile introduces an innovative Contactless Mobile Payment (CMP) solution that enables CMP
transactions via radio frequency with the payment function located on a mobile handset supporting
NFC technologies.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 15 / 133
No disclosure to a third party without prior written consent of Gemalto
One or more PAP can be installed in the (U)SIM card. To execute a CMP, customers simply hold their
mobile handset close to a contactless reader to exchange payment information. Authorization and
clearing are processed similarly to an EMV or a magnetic stripe purchase transaction.
The Payez Mobile solution can be used for any transaction amount, including low value transactions.
Payez Mobile CMP is characterized by a radio frequency short read range distance that requires the
mobile handset to be presented close to the contactless reader to enable a transaction. Thus, only
proximity purchase transactions are authorized ([PM-1], Section 4.2).
Two modes are offered to a customer to execute a Payez Mobile CMP: Mode 1 “PIN – TAP” and
Mode 2 “TAP – PIN – TAP”.
Warning:
The acronym PIN used in the two payment modes described below refers to the Personal Code
provided by the Issuing Bank to the customer.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 16 / 133
No disclosure to a third party without prior written consent of Gemalto
1.6.2.1 Mode 1: PIN – TAP
When making a purchase, first, the customer manually chooses the appropriate PAP to be used for
the purchase transaction, enters his Personal Code then taps his mobile handset on the landing zone
of the POS terminal3
to submit a payment transaction with the amount requested by the merchant and
indicated on the POS terminal. Figure 2 illustrates this mode of payment transaction in seven steps.
Figure 2: Mode 1: PIN - TAP
1.6.2.2 Mode 2: TAP – PIN – TAP:
In this mode, the customer first taps his mobile to the landing zone of the POS terminal which already
displays a transaction amount; after that, if the transaction amount is lower than Personal Code Entry
Limit (e.g. 20 EUR) then the transaction is processed without Personal Code (optional upon customer
configuration). Otherwise, if the amount is above the Personal Code Entry Limit (see Personal Code
Entry Conditions listed in Section 4.5.2.1, [PM-1]), then the customer enters his Personal Code and
after that taps his mobile handset a second time on the landing zone of the merchant POS terminal in
order to proceed with the payment transaction. The steps of this mode of transaction are presented in
Figure 3.
3
Point of sales (POS) stands for the merchant acceptance terminal used to execute and process a financial
transaction by communicating with a customer device such as a mobile handset.
POS terminal includes stand alone, multi-lanes or ECR devices The POS incorporates a contactless interface
device and may also include other components and interfaces.
Step 1
Select the payment
application via MMI
(multiple payment
applications
scenario)
Step 2
Enter Personal code
on mobile handset
Step 3
The transaction
amount is displayed
on the Merchant’s
POS terminal
Step 4
The end user "taps"
their mobile to the
contactless reader
"landing zone"
Step 5
Wait until a visible
and audible signal
takes place
BEEP
Step 7
The POS terminal
prints the user’s
receipt (conditional)
and the merchant’s
receipt
Authorisation Request (conditional) is
requested depending on Acquirer, Issuing Bank
risk management configuration
Step 6
The mobile displays
some information
about the current
transaction
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 17 / 133
No disclosure to a third party without prior written consent of Gemalto
Figure 3: Mode 2 - TAP - PIN – TAP
1.6.2.3 Security features
In addition to the security functions supported by the (U)SIM platform, (refer to the §1.3.8 of [NFC-ST]
for usage of the platform) , the PAP shall support the security features listed below:
 Offline communication with the POS terminal
 Offline Data Authentication
 Online Authentication and communication with the Bank Issuing
 Personal Code verification and management
 Transaction risk management analysis
 Transaction Certification
 Counter reset processing,
 Script processing via OTA bearer
 Auditing
 Log reading and update
 Administration management (Contactless life cycle management)
Depending on the Acquirer and Issuing Bank risk management configuration, the merchant POS
terminal processes the proximity purchase transaction offline or online.
A Payez Mobile CMP transaction shall be executed according to Payez Mobile specification and under
MasterCard, Visa or local scheme requirements and operating rules and should use the same
authorization network and clearing system than standard credit and debit cards. The contactless
payment application targeted is the Mobile PayPass v1.0 application according to MasterCard
specifications.
1.6.3 Required non-TOE hardware/software/firmware
This action describes the hardware, software or firmware present in the environment of the TOE and
that are required to have a functional correct usage of the TOE.
For a detailed description, see [PM-2], Section 2.2.
Step 2c
The end user enters
their personal code
on their mobile
handset
Step 1
The Merchant
enters the
transaction amount
on the POS terminal
Step 2
The end user "taps"
their mobile to the
contactless reader
"landing zone"
TAP
Personal Code
requested (*) ?
NO
Step 2b
A warning signal
(audible & visible)
requests the end
user to enter their
personal code
before completing
the transaction
BEEP 2
Step 2d
The end user "taps"
again their mobile
handset to the
contactless reader
"landing zone"
2nd TAP
Step 3
The end user keeps
their mobile handset
onto the contactless
reader until a visible
and audible signal
takes place
BEEP
Step 5
The POS terminal
prints the user’s
receipt (conditional)
and the merchant’s
receipt
YES
(*) See conditions Section 4.5.1
Authorisation Request (conditional) is
requested depending on Acquirer, Issuing
Bank risk management configuration
Step 4
The mobile displays
some information
about the current
transaction
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 18 / 133
No disclosure to a third party without prior written consent of Gemalto
The non-TOE hardware/software/firmware required by the (U)SIM platform (e.g. Bytecode verifier) are
also required by the TOE. More precisely all applications must follow the rules given inside guidances
for Upteq M-NFC certified product (D1186227 & D1188231).
Next paragraphs below describe the items required in the environment of the product but not required
for secure usage of the TOE.
1.6.3.1 Payez Mobile Application4
(AEPM CREL Application)
The Payez Mobile application is a CREL (Contactless Registry Event Listener) application according
to Global Platform Amendment C [GP–5]. The Payez Mobile application applies the Payez Mobile
business logic consisting to have only one activated Payment Application Package at a time. Upon a
new activation request, this application is responsible for managing the deactivation of the current
activated payment application.
The Payez Mobile application is the single application (except the CMP application itself) that can
modify the CMP contactless life cycle state from “ACTIVATED” to “DEACTIVATED”.
This application does not apply its business logic if the new application to be activated and the current
activated application are members of the same application group, or in case of one-shot payment5
.
1.6.3.2 Proximity Payment System Environment (PPSE) application (EMVCo CREL
Application)
The PPSE application is a CREL (Contactless Registry Event Listener) application according to
GlobalPlatform Amendment C [GP–5].
This application is present in the Issuer Security Domain. Therefore, it is under the MNO’s
responsibility.
Its role is to:
 read the GP Registry in order to check the “ACTIVATED” CMP application. Only one CMP
application is in the state “ACTIVATED” at a time. Therefore, the PPSE contains only one
CMP application AID;
 build the “SELECT PPSE” response. The PPSE response is updated each time an activation
or deactivation notification is received from the CRS API (Contactless Registry Service
Application Programming Interface);
 upon reception of a “SELECT PPSE” command, the PPSE application returns the PPSE
response built previously.
1.6.3.3 Payment Bridge application
The Payment Bridge application is to allow a MIDlet to interact with a Mobile Paypass 1.0 banking
application. Installed in a NFC-enabled UICC, its role is to manage the interactions with a MIDlet and
the Payment application through ShareableInterface.
With an event initiated by the user or by the OTA server, the Service Provider’s MIDlet will be in
measure to interact with the applets by sending APDUs through the I/O channel of the SIM. APDUs
sent to the SIM will be controlled by the JSR177 layer of the handset. Within the SIM, the Payment
Bridge applets act as a proxy between the Service Provider MIDlet on one side, and the payment
application on the other side.
4
Not to be confused with the Payment Application Package (PAP).
5
One-shot payment : The CMP application (that is not active by default) selected by the Customer is used only
for the current payment transaction.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 19 / 133
No disclosure to a third party without prior written consent of Gemalto
1.6.3.4 Bank TSM
This is a platform providing functions for transport encryption to manage the Bank Supplementary
Security Domain (Bank SSD) by establishing a dedicated secure channel for management commands
and data.
When using Delegated Management (DM) mode, it also provides functions to manage the request of
SSD creation and after requesting a token DM to the MNO, to manage the payment application
installation, instantiation and deletion.
1.6.3.5 UICC Management Platform
The UICC Management Platform is owned by the MNO and handles the global management of the
customer’s UICCs. This platform is mainly used during the payment service delivery.
1.6.3.6 Bank GUI Management Platform
The Bank GUI Management Platform enables the Bank GUI installation, its synchronization and its
update.This platform shall be able to cover application portability issues and deliver the appropriate
version of the Bank GUI, depending on the mobile handset used by customer.
1.6.3.7 POS terminal
Point of sales (POS) stands for the merchant acceptance terminal used to execute and process a
financial transaction by communicating with a customer device such as a mobile handset.
POS terminal includes stand alone, multi-lanes or ECR devices The POS incorporates a contactless
interface device and may also include other components and interfaces
The POS terminal shall comply with Payez Mobile minimum requirements defined in [PM-2].
1.6.3.8 POS Application
The POS terminal hosts a payment application that complies with MasterCard (PayPass), Visa
(PayWave) or local scheme contactless specifications and with Payez Mobile Specifications.
1.6.3.9 Mobile Handset
The TOE as a smartcard is intended to be plugged in a mobile handset. This equipment can be a
mobile phone or a PDA or any other connecting device.
NFC Mobile handset shall comply with Payez Mobile minimum requirements defined [PM-2].
1.6.3.10 Bank GUI
The Bank GUI (Java, SDK Android…) is a graphical interface loaded into the mobile handset that
allows the customer to access to the functions associated to their CMP applications.
The Bank GUI gives several functionalities to the customer for example:
 payment;
 set to ACTIVATED by default (Activate its CMP application);
 deactivate its CMP application;
 change the Personal Code;
 change the application name;
 CMP application parameters update;
 transaction log consultation;
 etc.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 20 / 133
No disclosure to a third party without prior written consent of Gemalto
1.6.3.11 MNO GUI
The MNO GUI is the primary graphical interface loaded onto the mobile handset which allows the
customer to access all their NFC services stored in the UICC.
If the customer selects one PAP, the MNO GUI launches the associated graphical interface (called
Bank GUI).
This interface allows the Customer to identify the current active CMP application by displaying a logo
beside the associated Bank GUI.
1.6.3.12 OTA Platform
Platform using OTA mechanisms providing functions to tunnel information messages exchanged
between the UICC Management Platform or the Bank TSM and a (U)SIM.
1.7 TOE description
1.7.1 Physical scope of the TOE: all hardware, firmware, software and
guidance
Figure 4: TOE physical scope like in [PAP]
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 21 / 133
No disclosure to a third party without prior written consent of Gemalto
Figure 5: TOE logical boundaries
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 22 / 133
No disclosure to a third party without prior written consent of Gemalto
Figure 6: Major TOE items and scope
The physical interfaces are those described in the platform ST [NFC-ST].
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 23 / 133
No disclosure to a third party without prior written consent of Gemalto
The following platform TOE components are described in details in the the platform ST [NFC-ST]
§1.3.3 and §1.3.5 compliant to the (U)SIM platform Protection Profile [PP USIM]:
 ST33F1M Integrated Circuit (IC) or chip
 NFC2.0 (U)SIM
 Bearer Independent Protocol (BIP) that does not offer any security function for the TOE
 Java Card System according JCS Protection Profile [JCS PP] Open configuration
 GlobalPlatform (GP)
 Native proprietary applications
1.7.1.1 Payment Application Package (PAP)
The Payment Application Package is loaded on a Bank TSM (cf. [PM-6]).
The Mobile Paypass 1.0 CMP application is compliant with the payment scheme specifications:
 MasterCard PayPass specifications (MChip/MagStripe)
It is possible to have several versions of the same CMP application loaded onto the UICC and thus
several instance versions.
In our case the Mobile Paypass 1.0 is loaded on a Bank SSD.
For more details about the PAP Application, please refer to:
 Section 1.7.2 of this document;
 Payez Mobile MasterCard Implementation Guide [PM-6].
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 24 / 133
No disclosure to a third party without prior written consent of Gemalto
1.7.2 Logical scope of the TOE: the logical security features offered by the
TOE
Refer to the §1.3.8 of [NFC-ST] for description of platform security features.
This section describes the security features offered by the PAP. These are structured in several
modules (see Figure 7). For a detailed description about these modules, refer to [PM-6] section 2.1.
Figure 7: PAP Module
1.7.2.1 Contactless Availability
The contactless availability is responsible for:
 the CMP activation by using the activation interface of the CRS API (the contactless life cycle
state will be updated to the value 'ACTIVATED' in the GP Registry)
 the CMP deactivation by using the deactivation interface of the CRS API (the contactless life
cycle state will be updated to the value 'DEACTIVATED' in the GP Registry)
 the CMP blocking by setting up the contactless life cycle state to the value 'NON
ACTIVATABLE' in the GP Registry (using the CRS API).
1.7.2.2 Script Processing Module
This is a functional module allowing the Issuing Bank to update some parameters of the application
and strictly compliant with the payment scheme specifications.
This module supports Personal Code Change/Unblock command, Personal Code Entry Limit Update,
etc.
For a detailed description about the Script Processing Module, refer to [PM-2], section 8.3.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 25 / 133
No disclosure to a third party without prior written consent of Gemalto
1.7.2.3 Counters Management
This module enables the update of limits and counters partial renewal.
The offline counters are updated during a payment transaction if it is accepted offline. The counters
are not updated if a transaction is completed online.
1.7.2.4 Counter Reset Processing Module
This module ensures that the CMP application counter limit is not exceeded. When counters exceed
their limit, the CMP application requests an online authorization to finalize the transaction.
For more information about this process, please refer to [PM-2] Section 8.2.4, [PM-6].
1.7.2.5 Transaction Log Module
During a payment transaction, this module ensures that the data for the transaction are logged.
Moreover, it allows the Bank GUI to retrieve the transaction log data for display purposes.
1.7.2.6 Detect GUI Presence Module
This module enables to detect the presence of the Bank GUI. If the Bank GUI is not present, the
transaction cannot be executed.
1.7.2.7 HCI Events Manager Module
The HCI events are used to wake up the Bank GUI when a user interaction is required (at the end of a
transaction or when the Personal Code is required)
6
.
1.7.2.8 Over-The-Air (OTA) Capabilities
Platform using OTA mechanisms providing functions to tunnel information messages exchanged
between the UICC Management Platform or the Bank TSM and a (U)SIM.
6
The only HCI event used in Payez Mobile solution is the EVT_TRANSACTION without the use of the
parameter field. To be aware of the transaction context (i.e. why the Bank GUI has be awaken), the Bank GUI
shall read the Mobile Cardholder Interaction Information
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 26 / 133
No disclosure to a third party without prior written consent of Gemalto
1.7.3 Overview of the TOE Life Cycle
The life cycle of the TOE is the life cycle of the (U)SIM card ((U)SIM Platform + PAP), from the
development to the operational stage through manufacturing and personalization. Figure 8 illustrates
the life cycle of the (U)SIM Platform as well as the life cycle of the PAP.
Figure 8: TOE life cycle
We refer to platform ST [NFC-ST] for the definition of the (U)SIM Platform life cycle.
The personalization phase (phase 6) includes the loading in pre-issuance of the 3 Standards APP
according to the product configuration (i.e. PPSE, Payez Mobile and Payment Bridge).
The life cycle of the PAP consists of consecutive stages:
 Development: This stage is performed on behalf of the Issuing Bank in a secure development
environment;
 Loading: This stage may occur in phase 7. Loading in Phase 7 is post-issuance, e.g. using
OTA means;
 Installation & Personalization: This stage may occur in phase 7 in the usage environment;
 Usage: This stage occurs in phase 7. In PAP Usage phase, the MNO and/or the Issuing Bank
may perform card management and PAP management activities such as updating
parameters, PAP blocking/unblocking, etc;
 Destruction: At this stage, the PAP is destroyed.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 27 / 133
No disclosure to a third party without prior written consent of Gemalto
We refer to platform Guides [NFC-GUIDE] for the security recommendations to apply.
PAP development (phase 1) is in the TOE evaluation scope, including the application verification
according to rules given inside guidances for Upteq M-NFC certified product (D1186227 & D1188231).
PAP verification and signature by Verification Authority (VASD) prior to PAP loading (phase 7) is out of
the TOE evaluation scope (covered by the platform guidance).
The Mobile Paypass 1.0 application, Secure APP, is loading in post-issuance during PAP loading
phase (phase 7).
1.7.3.1 TOE role and environment
We refer to platform ST [NFC-ST] for the location of the (U)SIM Platform role and environment.
Stage Role and Environment
PAP development
PAP Application Developer for Issuing Bank.
Gemalto Meudon, 6 rue de la Verrerie, 92197 Meudon.
Gemalto La Ciotat, La Vigie – Avenue du Jujubier – ZI Athélia
IV, 13705 La Ciotat.
Gemalto Singapore, 12 Ayer Rajah Crescent, 139941
Singapore.
ITSEF
Secure environment.
PAP loading
Application loader (i.e. TSM
7
entity) is in charge of secure
application loading. The TSM-SP acting behalf Issuing Bank
(SSD) to load the secure applications by OTA. The TSM-SP is
composed of Integrator to setup the server and the Server
(that contains secure application/DAP and software with
required keys) to perform the loading.
Before loading, all applications are verified by a Validation
Laboratory for the Standard applications, or by ITSEF for the
Secure applications.
All applications are associated at load time to a Verification
Authority
8
signature (Mandated DAP) that is verified on-card
by the on-card representative of the VA prior to the completion
of the application loading operation and prior to the instantiation
of any applet defined in the loaded application.
Controlling Authority
9
7
TSM means Trusted Services for Mobile NFC by linking MNO with the NFC world, managing services for banks
and transport operators and always-on services backed by banking grade security. Several TSM exist: the TSM-SP
acting on behalf the Service Provider (ie. Bank) and TSM-MNO acting on behalf the MNO (ie. Orange).
8
The Verification Authority (VA), trusted third party represented on the (U)SIM card, acting on behalf of the MNO
and responsible for the verification of applications signatures (mandated DAP) during the loading process. These
applications shall be validated for the standard applications or certified for the secure ones.
9
The Controlling Authority (CA), entity independent from the MNO represented on the (U)SIM card and
responsible for securing the keys creation and personalization of the Application Provider Security Domain
(APSD).
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 28 / 133
No disclosure to a third party without prior written consent of Gemalto
PAP installation and
personalization
PAP Provider
10
(Issuing Bank / SSD) personalize their
applications and security domains in a confidential manner.
They have security domain keysets enabling them to be
authenticated to the corresponding security domain and to
establish a trusted channel between the TOE and an external
trusted device. These security domain keysets are not known
by the (U)SIM Card issuer.
PAP usage (Card Mngt & Payment
process)
(U)SIM Card issuer (Orange MNO
11
/ ISD) is initially the only
entity authorized to manage applications (loading, instantiation,
deletion) through a secure communication channel with the
card, based on SMS or BIP technology. However he can grant
these privileges to the PAP Provider through the delegated
management function of GP.
PAP Provider (Issuing Bank / SSD).
End User
Unprotected environment.
PAP destruction
PAP Provider (Issuing Bank / SSD).
Unprotected environment.
1.7.4 PAP on-card life cycle
The on-card life cycle of the PAP (see Figure 10: GP standard life cycle states) is compliant with the
GlobalPlatform standard life cycle [GP]:
The PAP life cycle is divided in two parts:
 The contactless life cycle, concerning the contactless PAP states
 The life cycle status, concerning the standard GP states
1.7.4.1 Contactless life cycle
The contactless life cycle is composed of three states:
 ACTIVATED state in which the application is activated and can be selected by a terminal
application;
 DEACTIVATED state in which the application is deactivated but still can be selected by a
terminal application to receive appropriate commands. For instance, in this state, the
customer is authorized to view his transactions log or change the Personal Code;
 NON-ACTIVATABLE state in which the application cannot be activated and its services
are blocked either by the Issuing Bank or as a result of several (above the Personal Code
Entry Limit) wrong Personal Code entry by the customer. When the life cycle status of the
“Head Application” of an application group is NON ACTIVATABLE, then the members of
10
The Application Provider (AP) of PAP, financial institution (a bank) responsible for the applications and their
associated services.
11
The Mobile Network Operator (MNO or mobile operator), issuer of the (U)SIM Java Card platform and
proprietary of the (U)SIM. The platform guarantees that the issuer, once authenticated, could manage the
loading, instantiation or deletion of applications.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 29 / 133
No disclosure to a third party without prior written consent of Gemalto
the application group are automatically deactivated (application life cycle state changed to
the value “DEACTIVATED”). Please refer to GlobalPlatform [GP] for more information.
Figure 9: Contactless life cycle states
Steps Description:
1. Another CMP Application is ACTIVATED;
2. A Customer sets an application from “DEACTIVATED” to “ACTIVATED” via the function
“Define a CMP application”
3. A Customer sets an application from “ACTIVATED” to “DEACTIVATED” via the function
“Deactivate a CMP application”;;
4. The CMP application is blocked by the Issuing Bank (NON-ACTIVATABLE);
5. Three wrong personal codes have been entered by the Customer; the application is
automatically blocked (NON-ACTIVATABLE). Personal Code unblock is required to unblock
the CMP application;
6. The CMP Application is unblocked by the Issuing Bank;
7. The Personal Code is unblocked by the Issuing Bank.
1.7.4.2 GP standard life cycle
The life cycle status is the representation of the GP life cycle (compliant with [GP]).
The GP standard life cycle is composed of states:
 INSTALLED state corresponds to the status of the PAP after its installation. In this state,
the PAP can also be personalized (for instance, with the Personal Code of the customer);
 SELECTABLE state that means that the Application is able to receive commands from
off-card entities;
 LOCKED state which is a reversible state in which the PAP is NON SELECTABLE and its
services are temporarily blocked.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 30 / 133
No disclosure to a third party without prior written consent of Gemalto
Figure 10: GP standard life cycle states
1.7.5 Configurations
Platform: Orange NFC V2 G1 platform using ST33F1M
Configuration
Application
Mobile
Paypass 1.0
PPSE Payez Mobile Payment
Bridge
(Mastercard)
(CREL
EMVCo)
(CREL AEPM)
Bank SD MNO ISD MNO ISD Bank SD
N°1 – Mastercard EMVCo
X
(1 per virtual
card)
X
(1 instance)
N°2 – AEPM France/WW
X
(1 per virtual
card)
X
(1 instance)
X
(1 instance)
N°3 – Bridge
X
(1 per virtual
card)
X
(1 instance)
X
(1 per MPP)
N°4 – Bridge AEPM
X
(1 per virtual
card)
X
(1 instance)
X
(1 instance)
X
(1 per MPP)
In our case:
 the Mobile Paypass 1.0 application is considered as Secure APP
 the PPSE, Payez Mobile and Payment Bridge applications are considered as Standard APP
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 31 / 133
No disclosure to a third party without prior written consent of Gemalto
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 32 / 133
No disclosure to a third party without prior written consent of Gemalto
2 Conformance Claim
2.1 CC conformance claim
This Security Target is written using CC version 3.1 release 3.
This ST is CC Part 2 conformant and CC Part 3 conformant.
2.2 PP and Package claim
The evaluation assurance level of this security target is EAL4 augmented with:
 ALC_DVS.2 Sufficiency of security measures
 AVA_VAN.5 Advanced methodical vulnerability analysis
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 33 / 133
No disclosure to a third party without prior written consent of Gemalto
3 Statement of compatibility
This section presents the statement of compatibility of the composite TOE (the PAP upon the (U)SIM
platform). This statement stands as developer evidence of the composite evaluation activity
ASE_COMP.1 defined in [CPESC]: “The aim of this activity is to determine whether the Security
Target of the PAP does not contradict the Security Target of the underlying platform.”
Figure 11: Conformance and Composition
The platform-ST is the Orange NFC V2 G1 platform using ST33F1M given in [NFC-ST], compliant to
the (U)SIM Protection Profile [PP USIM] Basic configuration.
The composite-ST is the Mobile PayPass v1.0 given in present ST written from the AEPM’s
Guidance for Payment Application Package Security Target [PAP].
The platform-ST and composite-ST developer is Gemalto.
The next sections show by mapping form that there is not conflict between security environments (see
§3.1, §3.2 and §3.3), security objectives (see §3.4 and §3.5) and security requirements (see §3.6,
§3.7 and §3.8) of the composite-ST and platform-ST.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 34 / 133
No disclosure to a third party without prior written consent of Gemalto
3.1 Compatibility of threats
Platform-ST / (U)SIM Basic PP part Composite-ST
(T, not used, irrelevant)
T.PHYSICAL. The attacker discloses or modifies the design of the
TOE, its sensitive data or application code by physical (opposed to
logical) tampering means. This threat includes IC failure analysis,
electrical probing, unexpected tearing, and DP analysis. That also
includes the modification of the runtime execution of Java Card
System, GlobalPlatform or SCP software through alteration of the
intended execution order of (set of) instructions through physical
tampering techniques.
All T.DISCLOSURE
All T.INTEG
T.INTEG-USER-DATA. The attacker through a malicious applet
loaded on the card modifies application data, application keys or
authentication data.
All T.INTEG
T.TEMPORARY_DATA
T.COM-EXPLOIT. An attacker remotely exploits the
communication channel (USB, ISO-7816, NFC, BIP or SMS)
established between the mobile phone and the (U)SIM card in
order to modify or disclose confidential data.
All T
T.UNAUTHORIZED_CARD_MNGT. The attacker performs
unauthorized card management operations (for instance
impersonates one of the actor represented on the card) in order to
take benefit of the privileges or services granted to this actor on
the card such as fraudulent actions on package file, applet or
security domain.
All T.DISCLOSURE
All T.INTEG
T.TEMPORARY_DATA
All T.TRANSACTION
T.APPLICATION_DOS
All T.xxx_USURPATION
T.LIFE-CYCLE. An attacker accesses to an application outside of
its expected availability range thus violating irreversible life cycle
phases of the application (for instance, an attacker re-personalizes
the application).
No contradiction.
T.UNAUTHORIZED_ACCESS. By using the shareable object
mechanism on which relies the communication between two
applets, the attacker uses an applet on card to get access or to
modify data from another applet that he should not have access to.
No contradiction.
Platform-ST / JCS Open PP part Composite-ST
T.CONFID-APPLI-DATA. The attacker executes an application to
disclose data belonging to another application.
All T.DISCLOSURE
T.CONFID-JCS-CODE. The attacker executes an application to
disclose the Java Card System code.
No contradiction.
T.CONFID-JCS-DATA. The attacker executes an application to
disclose data belonging to the Java Card System.
No contradiction.
T.INTEG-APPLI-CODE. The attacker executes an application to
alter (part of) its own code or another application's code.
All T.INTEG
T.TEMPORARY_DATA
(PAP code)
T.INTEG-APPLI-CODE.LOAD. The attacker modifies (part of) its
own or another application code when an application package is
transmitted to the card for installation.
(PAP code)
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 35 / 133
No disclosure to a third party without prior written consent of Gemalto
T.INTEG-APPLI-DATA. The attacker executes an application to
alter (part of) another application's data.
All T.INTEG
T.TEMPORARY_DATA
T.INTEG-APPLI-DATA.LOAD. The attacker modifies (part of) the
initialization data contained in an application package when the
package is transmitted to the card for installation.
All T.INTEG
T.TEMPORARY_DATA
T.INTEG-JCS-CODE. The attacker executes an application to alter
(part of) the Java Card System code.
No contradiction.
T.INTEG-JCS-DATA. The attacker executes an application to alter
(part of) Java Card System or API data.
T.INTEG_SEL_ACT_PARAM
T.SID.1. An applet impersonates another application, or even the
Java Card RE, in order to gain illegal access to some resources of
the card or with respect to the end user or the terminal.
T.INTEG_SEL_ACT_PARAM
T.SID.2. The attacker modifies the TOE's attribution of a privileged
role (e.g. default applet and currently selected applet), which
allows illegal impersonation of this role.
T.INTEG_KEYS
T.INTEG_REG_PC
T.INTEG_SEL_ACT_PARAM
T.EXE-CODE.1. An applet performs an unauthorized execution of
a method.
(PAP code)
T.EXE-CODE.2. An applet performs an execution of a method
fragment or arbitrary data.
(PAP code)
T.EXE-CODE-REMOTE. The attacker performs an unauthorized
remote execution of a method from the CAD.
(PAP code)
T.NATIVE. An applet executes a native method to bypass a TOE
Security Function such as the firewall.
No contradiction.
T.RESOURCES. An attacker prevents correct operation of the
Java Card System through consumption of some resources of the
card: RAM or NVRAM.
No contradiction.
T.DELETION. The attacker deletes an applet or a package already
in use on the card, or uses the deletion functions to pave the way
for further attacks (putting the TOE in an insecure state).
(PAP code)
T.INTEG_SEL_ACT_PARAM
T.INSTALL. The attacker fraudulently installs post-issuance of an
applet on the card. This concerns either the installation of an
unverified applet or an attempt to induce a malfunction in the TOE
through the installation process.
T.INTEG_SEL_ACT_PARAM
T.OBJ-DELETION. The attacker keeps a reference to a garbage
collected object in order to force the TOE to execute an
unavailable method, to make it to crash, or to gain access to a
memory containing data that is now being used by another
application.
All T.DISCLOSURE
All T.INTEG
T.TEMPORARY_DATA
Platform-ST / (U)SIM part Composite-ST
T.UNAUTHORIZED_ACCESS_TO_SERVICE. An attacker may
gain direct access to an optional platform service without
authorization by bypassing access control to service activation.
No contradiction.
Table 1: Compatibility of threats
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 36 / 133
No disclosure to a third party without prior written consent of Gemalto
3.2 Compatibility of OSP
Platform-ST / (U)SIM Basic PP part Composite-ST
OSP.SECURE-APPS-CERTIFICATION.
Secure applications must be certified according to the Common
Criteria at an EAL equal to the one of the current Protection
Profile. The composition of these applications with the current PP
must follow the rules defined in the document [CPESC]. These
applications are associated to a digital signature which will be
checked by a VA during the loading into the TOE.
See [Secure APP] for more details on the evaluation/validation
process.
No contradiction.
Mobile Paypass 1.0 application
is Secure APP.
OSP.BASIC-APPS-VALIDATION.
Standard applications shall be associated to a digital signature
which will be checked by a VA during the loading into the TOE. In
addition to the rules stated by the Java Card specification, the
validation process must enforce that standard applications:
 must follow the extra-rules stated in the user manual of the
considered (U)SIM Java Card Platform,
 cannot be libraries,
 must not use RMI,
 must not use proprietary libraries which are not certified
(except system libraries),
 access control to certified proprietary libraries is controlled by
the secure application which has defined the library,
 must be associated to an identifier and this identifier has to be
used in parameter of the function calls.
See [Standard APP] for more details on the validation process.
No contradiction.
PPSE, Payez Mobile and
Payment Bridge applications
are Standard APP.
OSP.SHARE-CONTROL.
The Shareable interface functionality should be strictly controlled
for all applications to prevent transitive data flows between applets
(i.e., no resharing of a shareable object with a third applet) and
thus prevent access to unauthorized data.
No contradiction.
OSP.AID-MANAGEMENT.
When loading an application that uses shareable object interface,
to make its services available to other applications, the VA or the
MNO shall verify that the AID of the application being loaded does
not impersonate the AID known by another application on the card
for the use of shareable services.
No contradiction.
Mobile Paypass 1.0 application
is Secure APP.
PPSE, Payez Mobile and
Payment Bridge applications
are Standard APP.
OSP.OTA-LOADING.
Application code, validated or certified depending on the
application, is loaded "Over The Air" (OTA) onto (U)SIM Platform
using OTA servers of the mobile operator. If needed, the Card
issuer can pre-authorize content loading operation through
delegated management privilege to individual on-card
representative of APs. In that case the application code is loaded
in the APSD. Once loaded, the application is personalized using
the appropriate SD keys.
No contradiction.
Mobile Paypass 1.0 application
is Secure APP.
PPSE, Payez Mobile and
Payment Bridge applications
are Standard APP.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 37 / 133
No disclosure to a third party without prior written consent of Gemalto
OSP.OTA-SERVERS.
A security policy shall be employed by the mobile operator to
ensure the security of the applications stored on its servers.
No contradiction.
Mobile Paypass 1.0 application
is Secure APP.
PPSE, Payez Mobile and
Payment Bridge applications
are Standard APP.
OSP.APSD-KEYS.
The APSD keys personalization can rely either on the key escrow
if the APSD has been created before the usage phase of the
(U)SIM card or on the CA if the APSD has been created during the
usage phase.
No contradiction.
OSP.OPERATOR-KEYS.
The security of the mobile operator keys (ISD keys) must be
ensured by a well defined security policy that covers generation,
storage, distribution, destruction and recovery. This policy is
enforced by the mobile operator in collaboration with the
personalizer.
No contradiction.
OSP.KEY-GENERATION.
The personalizer must enforce a policy ensuring that generated
keys cannot be accessed in plaintext.
No contradiction.
OSP.CASD-KEYS.
The security domain keys of the CA must be securely generated
and stored in the (U)SIM card during the personalization process.
These keys are not modifiable after card issuance.
No contradiction.
OSP.VASD-KEYS.
The security domain keys of the VA must be securely generated
and stored in the (U)SIM card during the personalization process.
No contradiction.
Mobile Paypass 1.0 application
is Secure APP.
OSP.KEY-CHANGE.
The AP shall change its initial security domain keys (APSD) before
any operation on its Security Domain.
No contradiction.
OSP.SECURITY-DOMAINS.
Security domains can be dynamically created, deleted and blocked
during usage phase in post-issuance mode.
No contradiction.
OSP.QUOTAS.
Security domains are subject to quotas of memory at creation.
No contradiction.
OSP.PRODUCTION.
Production and personalization environment has to be secured as
the TOE delivery occurs after Phase 6.
No contradiction.
OSP.PERSONALIZER.
The personalizer under an Operator's Contract is in charge of the
TOE personalization process before card issuance. He ensures
the security of the keys he loads on the (U)SIM cards:
 Mobile operator keys including OTA keys (telecom keys either
generated by the personalizer or by the mobile operator) and
delegated management token keys
No contradiction.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 38 / 133
No disclosure to a third party without prior written consent of Gemalto
 Issuer Security Domain keys (ISD keys or Card issuer keys),
 Application Provider Security Domains keys (APSD keys).
 Controlling Authority Security Domain keys (CASD keys)
 Verification Authority Security Domain keys (VASD keys)
OSP.KEY-ESCROW.
The key escrow is a trusted actor in charge of the secure storage
of the initial AP keys generated by the TOE personalizer during
initial personalization. He ensures the security of the keys.
Platform-ST / JCS Open PP part Composite-ST
OSP.VERIFICATION.
This policy shall ensure the consistency between the export files
used in the verification and those used for installing the verified
file. The policy must also ensure that no modification of the file is
performed in between its verification and the signing by the
verification authority.
No contradiction.
Mobile Paypass 1.0 application
is Secure APP.
PPSE, Payez Mobile and
Payment Bridge applications
are Standard APP.
ALC comp.
Platform-ST / (U)SIM part Composite-ST
OSP.Secure_API.
The TOE must contribute to ensure that application can optimize
control on its sensitive operations using a dedicated API provided
by TOE. TOE will provide services for secure array management
and to detect loss of data integrity and inconsistent execution flow
and react against tearing or fault induction.
No contradiction.
The Secure APIs are used by
composite TOE.
OSP.RND.
This policy shall ensure the entropy of the random numbers
provided by the TOE to applet using [JCAPI] is sufficient. Thus
attacker is not able to predict or obtain information on generated
numbers.
No contradiction.
OSP.JCAPI-Services.
This policy shall ensure that hashing and checksum security
services defined in [JCAPI] provided by the TOE to applet is
secure. Thus attacker is not able to predict or obtain information
on manipulated data.
No contradiction.
OSP.TRUSTED-APPS-DEVELOPER.
There are application developers (as Gemalto) considered as
trusted by platform issuer and application providers. The
confidence in these actors has been obtained by audit of
development process and development environment performed by
ITSEF during private scheme evaluation or Common Criteria
composite evaluation process.
No contradiction.
ALC comp.
OSP.TRUSTED-APPS-PRE-ISSUANCE-LOADING.
For Pre-Issuance loading of trusted* applications, the audited
process during Platform evaluation must be used.
No contradiction.
ALC comp.
OSP.SERVICE_AUDIT.
The MNO and activation administrator (usually Gemalto) can audit
No contradiction.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 39 / 133
No disclosure to a third party without prior written consent of Gemalto
optional platform service activation using remote service audit.
OSP.ACTIVATION-KEY-ESCROW.
The key escrow is a trusted actor in charge of the secure storage
of the activation keys generated and stored outside of TOE and
import in TOE by the TOE personalizer during initial
personalization. He ensures the security of the keys for remote
service activation.
No contradiction.
OSP.EMVUtil_API.
The TOE must contribute to ensure that Banking application can
optimize control on its sensitive operations using a dedicated API
providing management of secure container and counter by TOE.
No contradiction.
The Secure APIs are used by
composite TOE.
Table 2: Compatibility of OSP
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 40 / 133
No disclosure to a third party without prior written consent of Gemalto
3.3 Compatibility of assumptions
Platform-ST / (U)SIM Basic part IrPA CfPA SgPA Composite-ST
A.MOBILE-OPERATOR.
The mobile operator is a trusted actor responsible for
the mobile network and the associated OTA servers.
The mobile operator as Card issuer cannot get access
or change the application data which belongs to the
AP.
X AGD comp.
A.OTA-ADMIN.
Administrators of the mobile operator OTA servers are
trusted people. They are trained to use and
administrate securely those servers. They have the
means and the equipments to perform their tasks.
They are aware of the sensitivity of the assets they
managed and the responsibilities associated to the
administration of OTA servers.
X AGD comp.
A.APPS-PROVIDER.
The AP is a trusted actor that provides standard or
secure applications. He is responsible for his security
domain keys (APSD keys).
X AGD comp.
A.VERIFICATION-AUTHORITY.
The VA is a trusted actor who is able to guarantee and
check the digital signature attached to a standard or
secure application.
X AGD comp.
A.CONTROLLING-AUTHORITY
The CA is a trusted actor responsible for securing the
APSD keys creation and personalization. He is
responsible for his security domain keys (CASD keys).
X AGD comp.
Platform-ST / JCS Open part IrPA CfPA SgPA Composite-ST
A.APPLET.
Applets loaded post-issuance do not contain native
methods. The Java Card specification explicitly "does
not include support for native methods" ([JCVM222],
§3.3) outside the API.
X AGD comp.
A.VERIFICATION.
All the bytecodes are verified at least once, before the
loading, before the installation or before the execution,
depending on the card capabilities, in order to ensure
that each bytecode is valid at execution time.
X AGD comp.
Platform-ST / Addition part IrPA CfPA SgPA Composite-ST
None
Table 3: Compatibility of assumptions
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 41 / 133
No disclosure to a third party without prior written consent of Gemalto
3.4 Compatibility of TOE security objectives
Platform-ST / (U)SIM Basic PP part
Composite-ST
(O, not used, irrelevant)
O.CARD-MANAGEMENT.
The TOE shall provide card management functionalities (loading,
installation, extradition, deletion of applications and GP registry
updates) in charge of the life cycle of the whole (U)SIM card and
installed applications (applets).
The card manager, the application with specific rights responsible
for the administration of the smart card, shall control the access to
card management functions. It shall also implement the card
issuer's policy on card management.
No contradiction
O.DOMAIN-RIGHTS.
The Card issuer shall not get access or change personalized AP
security domain keys which belong to the AP. Modification of a
security domain keyset is restricted to the AP who owns the
security domain.
No contradiction
O.APPLI-AUTH.
The card manager shall enforce the application security policies
established by the card issuer by requiring application
authentication during application loading on the card.
O.GUIS_AUTH
O.COMM-AUTH.
The TOE shall authenticate the origin of the card management
requests that the card receives, and authenticate itself to the
remote actor.
O.GUIS_AUTH
O.MNO_AUTH
O.COMM-INTEGRITY.
The TOE shall verify the integrity of the card management
requests that the card receives.
O.DATA_INTEGRITY
O.COMM-CONFIDENTIALITY
The TOE shall be able to process card management requests
containing encrypted data.
O.DATA_DISCLOSURE
O.SCP-SUPPORT.
The TOE OS shall support the following functionalities:
(1) It does not allow the TSFs to be bypassed or altered and
does not allow access to other low-level functions than those
made available by the packages of the API. That includes the
protection of its private data and code (against disclosure or
modification) from the Java Card System.
(2) It provides secure low-level cryptographic processing to the
Java Card System, GlobalPlatform.
(3) It supports the needs for any update to a single persistent
object or class field to be atomic, and possibly a low-level
transaction mechanism.
(4) It allows the Java Card System to store data in "persistent
technology memory" or in volatile memory, depending on its
needs (for instance, transient objects must not be stored in
All O
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 42 / 133
No disclosure to a third party without prior written consent of Gemalto
non-volatile memory). The memory model is structured and
allows for low-level control accesses (segmentation fault
detection).
Platform-ST / JCS Open PP part Composite-ST
O.SID.
The TOE shall uniquely identify every subject (applet, or package)
before granting it access to any service.
No contradiction
O.FIREWALL.
The TOE shall ensure controlled sharing of data containers owned
by applets of different packages or the JCRE and between applets
and the TSFs.
No contradiction
O.GLOBAL-ARRAYS-CONFID.
The TOE shall ensure that the APDU buffer that is shared by all
applications is always cleaned upon applet selection. The TOE
shall ensure that the global byte array used for the invocation of
the install method of the selected applet is always cleaned after
the return from the install method.
No contradiction
O.GLOBAL-ARRAYS-INTEG.
The TOE shall ensure that only the currently selected application
may have a write access to the APDU buffer and the global byte
array used for the invocation of the install method of the selected
applet.
No contradiction
O.NATIVE.
The only means that the Java Card VM shall provide for an
application to execute native code is the invocation of a method of
the Java Card API, or any additional API.
No contradiction
O.OPERATE.
The TOE must ensure continued correct operation of its security
functions.
No contradiction
O.REALLOCATION.
The TOE shall ensure that the re-allocation of a memory block for
the runtime areas of the Java Card VM does not disclose any
information that was previously stored in that block.
No contradiction
O.RESSOURCES.
The TOE shall control the availability of resources for the
applications.
No contradiction
O.ALARM.
The TOE shall provide appropriate feedback information upon
detection of a potential security violation.
No contradiction
O.CIPHER.
The TOE shall provide a means to cipher sensitive data for
applications in a secure way. In particular, the TOE must support
cryptographic algorithms consistent with cryptographic usage
policies and standards.
No contradiction
O.KEY-MNGT.
No contradiction
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 43 / 133
No disclosure to a third party without prior written consent of Gemalto
The TOE shall provide a means to securely manage cryptographic
keys. This concerns the correct generation, distribution, access
and destruction of cryptographic keys.
O.PIN-MNGT.
The TOE shall provide a means to securely manage PIN objects.
No contradiction
O.REMOTE.
The TOE shall provide restricted remote access from the CAD to
the services implemented by the applets on the card. This
particularly concerns the Java Card RMI services introduced in
version 2.2.x of the Java Card platform.
No contradiction
O.TRANSACTION.
The TOE must provide a means to execute a set of operations
atomically.
No contradiction
O.OBJ-DELETION.
The TOE shall ensure the object deletion shall not break
references to objects.
No contradiction
O.DELETION.
The TOE shall ensure that both applet and package deletion
perform as expected.
No contradiction
O.LOAD.
The TOE shall ensure that the loading of a package into the card
is safe.
No contradiction
O.INSTALL.
The TOE shall ensure that the installation of an applet performs as
expected.
No contradiction
O.SCP.RECOVERY.
If there is a loss of power, or if the smart card is withdrawn from
the CAD while an operation is in progress, the SCP must allow the
TOE to eventually complete the interrupted operation successfully,
or recover to a consistent and secure state.
No contradiction
O.SCP.IC.
The SCP shall provide all IC security features against physical
attacks.
No contradiction
Platform-ST / (U)SIM part Composite-ST
O.Secure_API.
The TOE shall provide to application a secure_API means to
optimize control on sensitive operations performed by application.
TOE shall provide services for secure array management and to
detect loss of data integrity and inconsistent execution flow and
react against tearing or fault induction.
No contradiction
O.RNG.
The TOE must contribute to ensure that random numbers shall not
be predictable and shall have sufficient entropy.
No contradiction
O.JCAPI-Services.
No contradiction
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 44 / 133
No disclosure to a third party without prior written consent of Gemalto
The TOE must contribute to ensure that data manipulated during
SHA and CRC services as defined in [JCAPI] shall not be
observed.
O.REMOTE_SERVICE_AUDIT.
The TOE shall perform remote service audit only when optional
platform service audit is authorized and only by an authorized
actor. Limited to MNO or GemActivate Administrator (usually
Gemalto).
No contradiction
O.REMOTE_SERVICE_ACTIVCATION.
The TOE shall perform remote optional platform service activation
only when service activation is authorized and only by an
authorized actor. Limited to Gemactivate Administrator (usually
Gemalto) under control of MNO.
No contradiction
O.EMVUtil_API.
The TOE shall provide to banking application a secure_API to
optimize control on sensitive object performed by application.
TOE shall provide services for secure container and counter
management and to detect loss of data integrity.
No contradiction
Table 4: Compatibility of TOE security objectives
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 45 / 133
No disclosure to a third party without prior written consent of Gemalto
3.5 Compatibility of security objectives for the environment
Platform-ST / (U)SIM Basic PP part Composite-ST
OE.MOBILE-OPERATOR.
The mobile operator shall be a trusted actor responsible for the
mobile network and the associated OTA servers.
No contradiction
OE.OTA-ADMIN.
Administrators of the mobile operator OTA servers shall be trusted
people. They shall be trained to use and administrate those
servers. They have the means and the equipments to perform their
tasks.
They must be aware of the sensitivity of the assets they manage
and the responsibilities associated to the administration of OTA
servers.
No contradiction
OE.APPS-PROVIDER.
The AP shall be a trusted actor that provides standard or secure
application. He must be responsible of his security domain keys.
No contradiction
OE.VERIFICATION-AUTHORITY.
The VA should be a trusted actor who is able to guarantee and
check the digital signature attached to an application.
No contradiction
OE.CONTROLLING-AUTHORITY.
The CA shall be a trusted actor responsible for securing the APSD
keys creation and personalisation. He must be responsible for his
security domain keys (CASD keys).
No contradiction
OE.SECURE-APPS-CERTIFICATION.
Secure applications must be evaluated and certified at a security
level higher or equal than the one of the current Protection Profile.
No contradiction
OE.BASIC-APPS-VALIDATION.
Standard applications must be analysed during the validation
process in order to ensure that the rules for correct usage of the
TOE are still enforced.
No contradiction
OE.SHARE-CONTROL.
All applications (standard and secure applications) must have
means to identify the applications with whom they share data
using the Shareable Interface.
No contradiction
OE.AID-MANAGEMENT.
The VA or the MNO shall verify that the AID of the application
being loaded does not impersonate the AID known by another
application on the card for the use of shareable services.
No contradiction
OE.OTA-LOADING.
Application code, validated or certified depending on the
application, is loaded "Over The Air" (OTA) onto (U)SIM Platform
using OTA servers. This process should protect the confidentiality
and the integrity of the loaded application code.
No contradiction
OE.OTA-SERVERS.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 46 / 133
No disclosure to a third party without prior written consent of Gemalto
The mobile operator must enforce a policy to ensure the security
of the applications stored on its servers.
OE.AP-KEYS.
The SD keys personalizer, the AP and the key escrow must
enforce a security policy on SD keys in order to secure their
transmission.
No contradiction
OE.OPERATOR-KEYS.
The security of the mobile operator keys must be ensured in the
environment of the TOE.
No contradiction
OE.KEY-GENERATION.
The security of the mobile operator keys must be ensured in the
environment of the TOE.
No contradiction
OE.CA-KEYS.
The security domain keys of the CA must be securely generated
prior storage in the (U)SIM card.
No contradiction
OE.VA-KEYS.
The security domain keys of the VA must be securely generated
prior storage in the (U)SIM card.
No contradiction
OE.KEY-CHANGE.
The AP must change its security domain initial keys before any
operation on it.
No contradiction
OE.SECURITY-DOMAINS.
Security domains can be dynamically created, deleted and blocked
during usage phase in post-issuance mode.
No contradiction
OE.QUOTAS.
Security domains are subject to quotas of memory at creation.
No contradiction
OE.PRODUCTION.
Production and personalization environment if the TOE delivery
occurs before Phase 6 of the TOE life cycle must be trusted and
secure.
No contradiction
OE.PERSONALIZER.
The personalizer shall be a trusted actor in charge of the
personalization process. He must ensure the security of the keys it
manages and loads into the card:
 Mobile operator keys including OTA keys (telecom keys either
generated by the personalizer or by the mobile operator),
 Issuer Security Domain keys (ISD keys),
 Application Provider Security Domain keys (APSD keys).
 Controlling Authority Security Domain keys (CASD keys)
No contradiction
OE.KEY-ESCROW.
The key escrow shall be a trusted actor in charge of the secure
storage of the AP initial keys generated by the personalizer.
No contradiction
Platform-ST / JCS Open PP part Composite-ST
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 47 / 133
No disclosure to a third party without prior written consent of Gemalto
OE.APPLET.
No applet loaded post-issuance shall contain native methods.
No contradiction
OE.VERIFICATION.
All the bytecodes shall be verified at least once, before the
loading, before the installation or before the execution, depending
on the card capabilities, in order to ensure that each bytecode is
valid at execution time.
No contradiction
Platform-ST / (U)SIM part Composite-ST
OE.TRUSTED-APPS-DEVELOPER.
The trusted application developer shall be a trusted actor that
provides basic or secure application where correct usage of the
TOE has been verified applying a secure development process in
secure development environment.
No contradiction
OE.TRUSTED-APPS-PRE-ISSUANCE-LOADING.
The trusted pre-issuance loading on the platform must be done
only using verified applet applying an audited process in a secure
environment.
No contradiction
OE.ACTIVATION-KEY-ESCROW.
The key escrow is a trusted actor must ensure the security of the
keys used for remote service activation during generation, storage,
importation in TOE and usage.
No contradiction
Table 5: Compatibility of security objectives for the environment
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 48 / 133
No disclosure to a third party without prior written consent of Gemalto
3.6 Compatibility of security functional requirements
Platform-ST / (U)SIM Basic part RP_SFR IP_SFR Composite-ST
FCS_COP.1/DAP X
FDP_ITC.2/CCM X
FDP_ROL.1/CCM X
FDP_UIT.1/CCM X
FPT_FLS.1/CCM X
FDP_ACC.1/SD X
FDP_ACF.1/SD X
FMT_MSA.1/SD X
FMT_MSA.3/SD X
FMT_SMF.1/SD X
FMT_SMR.1/SD X
FCO_NRO.2/SC X
FDP_IFC.2/SC X
FDP_IFF.1/SC X
FIA_UID.1/SC X
FIA_UAU.1/SC X
FIA_UAU.4/SC X
FMT_MSA.1/SC X
FMT_MSA.3/SC X
FMT_SMF.1/SC X
FTP_ITC.1/SC X
Platform-ST / JCS Open part RP_SFR IP_SFR Composite-ST
FDP_ACC.2/FIREWALL X
FDP_ACF.1/FIREWALL X
FDP_IFC.1/JCVM X
FDP_IFF.1/JCVM X
FDP_RIP.1/OBJECTS X
FMT_MSA.1/JCRE X
FMT_MSA.1/JCVM X
FMT_MSA.2/FIREWALL_JCVM X
FMT_MSA.3/FIREWALL X
FMT_MSA.3/JCVM X
FMT_SMF.1 X
FMT_SMR.1 X
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 49 / 133
No disclosure to a third party without prior written consent of Gemalto
FCS_CKM.1/DES X
FCS_CKM.1/AES X Not used
FCS_CKM.1/RSA X
FCS_CKM.2/DES X
FCS_CKM.2/AES X Not used
FCS_CKM.2/RSA X
FCS_CKM.3/DES X
FCS_CKM.3/AES X Not used
FCS_CKM.3/RSA X
FCS_CKM.4 X
FCS_COP.1/DES_CIPHER X
FCS_COP.1/DES_MAC_COMP X
FCS_COP.1/AES_CIPHER X Not used
FCS_COP.1/AES_MAC_COMP X Not used
FCS_COP.1/RSA_SIGN X
FCS_COP.1/RSA_CIPHER X
FCS_COP.1/HMAC
FDP_RIP.1/ABORT X
FDP_RIP.1/APDU X
FDP_RIP.1/bArray X
FDP_RIP.1/KEYS X
FDP_RIP.1/TRANSIENT X
FDP_ROL.1/FIREWALL X
FAU_ARP.1 X
FDP_SDI.2 X
FPR_UNO.1 X
FPT_FLS.1/JCS X
FPT_TDC.1 X
FIA_ATD.1/AID X
FIA_UID.2/AID X
FIA_USB.1/AID X
FMT_MTD.1/JCRE X
FMT_MTD.3/JCRE X
FDP_ITC.2/Installer X
FMT_SMR.1/Installer X
FPT_FLS.1/Installer X
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 50 / 133
No disclosure to a third party without prior written consent of Gemalto
FPT_RCV.3/Installer X
FDP_ACC.2/ADEL X
FDP_ACF.1/ADEL X
FDP_RIP.1/ADEL X
FMT_MSA.1/ADEL X
FMT_MSA.3/ADEL X
FMT_SMF.1/ADEL X
FMT_SMR.1/ADEL X
FPT_FLS.1/ADEL X
FDP_ACC.2/JCRMI X
FDP_ACF.1/JCRMI X
FDP_IFC.1/JCRMI X
FDP_IFF.1/JCRMI X
FMT_MSA.1/EXPORT X
FMT_MSA.1/REM_REFS X
FMT_MSA.3/JCRMI X Not used
FMT_REV.1/JCRMI X Not used
FMT_SMF.1/JCRMI X Not used
FMT_SMR.1/JCRMI X Not used
FDP_RIP.1/ODEL X
FPT_FLS.1/ODEL X
FCO_NRO.2/CM X
FDP_IFC.2/CM X
FDP_IFF.1/CM X
FDP_UIT.1/CM X
FIA_UID.1/CM X
FMT_MSA.1/CM X
FMT_MSA.3/CM X
FMT_SMF.1/CM X
FMT_SMR.1/CM X
FTP_ITC.1/CM X
FPT_RCV.3/OS X
FPT_RCV.4/OS X
Platform-ST / Addition part RP_SFR IP_SFR Composite-ST
FCS_COP.1/SHA2 X
FCS_COP.1/CRC X
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 51 / 133
No disclosure to a third party without prior written consent of Gemalto
FCS_RND.1 X FIA_SOS.2
FPT_FLS.1/SecureAPI X
FPT_ITT.1/SecureAPI X
FPR_UNO.1/SecureAPI X
FMT_SMR.1/GemActivate X Not used
FMT_SMF.1/GemActivate X Not used
FMT_MOF.1/GemActivate X Not used
FMT_MSA.1/GemActivate X Not used
FMT_MTD.1/GemActivate X Not used
FPT_ITT.1/EMVUtilAPI X
FDP_SDI.1/EMVUtilAPI X
Table 6: Compatibility of security functional requirements
3.7 Compatibility of security functional requirements for the
environment
Not applicable.
3.8 Compatibility of assurance requirements
The EAL4+ chosen for the composite-ST evaluation does not exceed the EAL4+ applied to the
evaluation of the platform-ST.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 52 / 133
No disclosure to a third party without prior written consent of Gemalto
4 Security Problem Definition
4.1 Assets
This section identifies the assets of the PAP, protected by a combination of (U)SIM platform and PAP
itself. Note that the PAP code is an asset of the (U)SIM platform, protected in integrity by means of
JavaCard System access control.
In the following, the description of each asset states the type of protection required.
4.1.1 User data
User data are created by and for the user. These data do not affect the operation of the TSF. The
following assets are user data.
POS Transaction Data
All data transmitted to the PAP from the POS terminal. This includes: Country Code, Terminal
Verification Result, etc.
Protection: integrity.
Issuing Bank Transaction Data
All transaction data transmitted to the PAP by the Issuing Bank including Issuing Bank
authentication data, ARPC, CDOL2, etc.
Protection: integrity.
Issuing Bank Scripts
All the scripts transmitted by the Issuing Bank to update PAP Transaction Parameters and PAP
internal states (Application Block/Unblock, Counter Reset, Change/Unblock the Personal Code,etc)
Protection: integrity.
MNO Data
All data transmitted to the TOE by the MNO including the MNO authentication data.
Protection: integrity.
PAP Log File
PAP Log File and its associated format under EMV rules. This asset contains the log data of the
last transactions performed by the PAP.
Protection: integrity
Customer Account Information
All customer bank account data including the PAN, the PAN Sequence Number, expiration date.
Protection: integrity.
PAP keys
The cryptographic keys owned by the payment application instances.
Protection: integrity and confidentiality
Application Note:
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 53 / 133
No disclosure to a third party without prior written consent of Gemalto
This asset includes secret keys, private keys and random numbers used for secret key generation.
PAP Transaction Parameters
Any data used for internal card risk management, including last on-line ATC, PAP AID, PDOL data,
Currency code, Personal Code Entry Floor Limit, Personal Code indicators, CDOL1, CVM, PK
certificates.
Protection: integrity.
PAP Selection and Activation parameters
The parameters allowing the POS to perform the selection and activation of the embedded PAP.
Protection: integrity.
Application Note:
For instance the AID, the longAID, the AFL, contactless life cycle state, etc.
4.1.2 TSF data
TSF data are data might affect the operation of the TOE.
4.1.2.1 TRANSACTION MANAGEMENT DATA
Reference Personal Code
The stored value of the Personal Code which allows the authentication of the customer to the PAP.
This includes related parameters for entry checking (POS currency, Personal Code Entry Limit).
Protection: integrity and confidentiality.
PAP Counters
This asset covers two types of counters:
risk analysis counters which is data used to count sensitive operations, for instance, the
number of transactions processed by the PAP (ATC),
secure counters such as the number of failed attempts to present the Personal Code
(Personal Code Try Counter).
Protection: integrity
PAP State Machine
The PAP State Machine stores information about the PAP application internal states during its
usage phase.
Protection: integrity.
4.1.2.2 TEMPORARY TRANSACTION DATA
PAP Transaction Data
All data used by the PAP when performing payment transactions, including Card Challenge,
Dynamic Authentication related data, Session Keys, Card Verification Results, Cryptograms (AAC,
TC and ARQC).
Protection: integrity
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 54 / 133
No disclosure to a third party without prior written consent of Gemalto
4.2 Users / Subjects
4.2.1 USERS
Users are entities (human or IT) outside the TOE that interact with the TOE.
U.CUSTOMER
The customer interacts with the TOE in its usage phase. The customer is able to perform a
transaction using the PAP embedded in the (U)SIM card of his mobile handset.
U.ISSUING_BANK
The Issuing Bank is the PAP provider. The Issuing Bank is responsible of payment transactions
authorisation and PAP administration (i.e. loading of PAP code, data and keys belonging to a
specific customer).
U.MERCHANT_POS
The POS terminal used by the merchant. It initiates transactions with the PAP in the customer's
mobile handset for payment of a good or a service.
U.MNO
The Mobile Network Operator is the (U)SIM Card Issuer. The MNO provides cards to the
customers. The MNO is responsible for the secure management of all pre-issuance phases of the
(U)SIM card life cycle status and for some post-issuance processes.
Application Note:
The MNO can provide privileges to Issuing Banks via the Delegated Management functionality. The
MNO can also manage authorisation of applications permitted to reside on its (U)SIM cards.
U.APP
Any sensitive or non-sensitive application embedded in the (U)SIM card besides the PAP.
U.BANK_GUI
This is a graphical interface loaded into the mobile handset, that allows the customer to access to
the functions associated to their CMP applications.
U.BANK_MNG_SW
This is the software that is in charge of establishing a secure channel with the (U)SIM to tunnel
PAP management functions (loading, updating,...) and data.
U.MNO_MNG_SW
This is the software that is in charge of establishing a secure channel with the (U)SIM to tunnel
MNO's management functions and data.
4.2.2 SUBJECTS
Subjects are active entities in the (U)SIM.
S.PAP
The PAP subject is the Payment Application Package.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 55 / 133
No disclosure to a third party without prior written consent of Gemalto
S.BANK_TSM
The Bank TSM allows the Issuing Bank to submit PAP management operations (installation,
selection, activation, block, counter reset, etc).
S.MNO_ISD
The MNO Issuer Security Domain allows the MNO to verify the Issuing Bank management
operations in a Delegated Management privilege mode (token verification).
4.3 Threats
A threat agent wishes to abuse the assets by physical or logical attacks or by any other type of
attacks. Any user may act as a threat agent.
4.3.1 DISCLOSURE
Unauthorised disclosure of assets.
T.DISCLOSURE_KEYS
An attacker may perform attacks leading to unauthorised knowledge of the keys.
Assets threatened: PAP keys.
T.DISCLOSURE_REF_PC
An attacker may perform attacks leading to unauthorised knowledge of the Reference Personal
Code.
Assets threatened: Reference Personal Code.
4.3.2 INTEGRITY
Unauthorised modification of assets.
T.INTEG_LOG_FILE
Unauthorised modification of stored log files: an attacker modifies the log of transactions in order to
hide malicious operations.
Asset threatened: PAP Log File.
T.INTEG_KEYS
Unauthorised modification of stored keys: an attacker modifies the value of the keys in order to
input a known key.
Assets threatened: PAP keys.
T.INTEG_ACCOUNT_INFO
Unauthorised modification of stored customer account information: for instance an attacker
modifies the value of the PAN.
Assets threatened: Customer Account Information.
T.INTEG_REF_PC
Unauthorised modification of stored Reference Personal Code: an attacker modifies the value of
the Reference Personal Code stored in the PAP, for instance, in order to enter a known one.
Assets threatened: Reference Personal Code.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 56 / 133
No disclosure to a third party without prior written consent of Gemalto
T.INTEG_TRANS_PARAM
Unauthorised modification of stored transactions parameters: an attacker modifies the value of
transaction parameters which define the configuration of the PAP in order to bypass controls or a
limitation enforced by the bank's risk management and let the PAP accepting counterfeited or
replayed transactions.
Assets threatened: PAP Transaction Parameters, PAP State Machine.
T.INTEG_COUNT
Unauthorised modification of risk analysis counters or secure counters. Such as the Personal Code
Try Counter stored in the TOE: an attacker modifies the value of the Personal Code Try Counter
stored in the PAP in order to change the limitation of the number of failing Personal Code required
and finally gets unauthorised permission to submit a payment transaction.
Assets threatened: PAP Counters.
T.TEMPORARY_DATA
Unauthorised modification of temporary transaction data: an attacker modifies the value of
transaction data in order to authorise counterfeited or replayed transactions.
Assets threatened: PAP Transaction Data, POS Transaction Data, Issuing-Bank Scripts, MNO
Data, Issuing Bank Transaction Data.
T.INTEG_SEL_ACT_PARAM
Unauthorised modification of stored selection and activation parameters: an attacker modifies the
value of parameters allowing the POS to perform the selection and activation of the embedded
PAP in order to select and activate a counterfeited PAP.
Assets threatened: PAP Selection and Activation Parameters.
4.3.3 FRAUDULENT PAYMENT
T.STEALING
An attacker identifies and steals the mobile handset of the legitimate customer and if necessary
disables the OTA channel (activating of the airplane mode, for instance) in order to use it to submit
payment transactions.
Assets threatened: All assets.
T.MERCHANT_ACCOMPLICE
An attacker deals with a merchant in order to split payment into small amount payments that do not
require Personal Code entry.
Assets threatened: PAP Transaction Parameters.
T.MAN-IN-THE-MIDDLE
An attacker installs on his mobile handset an application or uses a NFC device that is capable of
relaying communications from the POS terminal to a mobile handset including a genuine payment
application via NFC bearer or OTA bearer. The attacker presents his mobile handset or his NFC
device to the POS terminal for a payment transaction, the request for payment is relayed from the
POS terminal, through one or more intermediate attackers fake devices (NFC devices), to the
victims mobile handset, which may be at a considerable distance.
Assets threatened: PAP Transaction parameters, PAP Counters.
T.TRANSACTION_REPUDIATION
Performing payment transactions without the customer authentication. It can lead to the repudiation
of those transactions by the customer.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 57 / 133
No disclosure to a third party without prior written consent of Gemalto
Assets threatened: PAP Log File and PAP Transaction Parameters.
T.TRANSACTION_COUNTERFEITING
Counterfeiting of payment transactions. This may take several forms depending on the type of the
data available to the attacker:
knowledge of all personalisation data to clone a payment application;
knowledge of the MNOs master key or the Bank's TSM key to make a real fake payment
application;
exploiting cryptographic weaknesses to determine the keys.
Assets threatened: PAP keys, PAP Transaction Parameters, Customer Account Information, PAP
Transaction Data.
T.TRANSACTION_REPLAY
Replay of a previous complete sequence of transaction operations.
Asset threatened: PAP Transaction data, POS Transaction data, Issuing Bank Transaction Data.
Application Note:
This attack may be done by exploiting cryptographic weaknesses to determine the random values
used, for instance, in DDA computation and session key diversification in order to replay previous
transactions and usurpate users' identities.
4.3.4 DENIAL-OF-SERVICE
T.CERTIF_CORRUPTION
Corruption of the transaction data (certificates) in order to deny participation to the transaction
under the terms claimed by one party.
Assets threatened: PAP Transaction Parameters, PAP Transaction Data, POS Transaction Data.
T.APPLICATIONS_DOS
Exploiting OTA bearer or NFC bearer, an attacker initiates transactions of small amounts by
simulating a POS terminal. He may also install fraudulently an application on the mobile handset
(GUI) that initiates transactions with the (U)SIM card. This attack may cause denial of service on
the payment applications.
Assets threatened: Issuing-Bank Scripts, MNO Data, Issuing Bank Transaction Data.
4.3.5 IDENTITY_USURPATION
T.MNO_USURPATION
An attacker is illegally granted the rights of the MNO to modify the transactions parameters in order
to authorise fraudulent transactions.
Assets threatened: MNO Data.
T.ISSUING-BANK_USURPATION
An attacker is illegally granted rights of the Issuing Bank to make unauthorised PAP management
operations.
Assets threatened: Issuing Bank Transaction Data.
T.CUSTOMER_USURPATION
An attacker is illegally granted the rights of the legitimate customer to submit unauthorised
transactions on his/her behalf.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 58 / 133
No disclosure to a third party without prior written consent of Gemalto
Assets threatened: All assets.
Application Note: Those attacks could be made by exploiting cryptographic weaknesses to determine
the keys or random values used in the authentication process in order to usurpate users' identities.
4.4 Organisational Security Policies
4.4.1 HANDSET
OSP.POLICY
The mobile handset implements a security policy and a control access policy to resources ((U)SIM,
network,etc)
OSP.CUSTOMER_PC_CONFID
The mobile handset never conserves the customer's Personal Code in its memory.
OSP.GUIS_IDENTIFICATION
The handset implements an access control mechanism that identifies GUIs authorised to
communicate with the PAP (Cardlets).
4.4.2 MANAGEMENT
OSP.CERTIFICATES_MNGT
The lifetime of the (EMV-CDA) authentication certificates with the payment terminal varies
according to the type of the payment application (application lifetime), and the (U)SIM card
(lifetime). These certificates are updated via OTA during the term of the contract signed with the
customer. Updating EMV certificates makes compromised payment applications inoperative.
OSP.Contactless_life cycle_MNGT
Each PAP holds the "Contactless Life Cycle State", which takes values from: ACTIVATED,
DEACTIVATED, NON-ACTIVATABLE.
In a Payez Mobile implementation, there shall be at maximum one payment application in
"ACTIVATED" state. The Payez Mobile application handles this requirement deactivating the
previous payment application when a new one requests is activated. When the Payez Mobile
application receives a notification from the CRS API that a payment application has just been
activated, it uses the GP mechanisms as defined in the amendment C [GP-5] to deactivate the
previous active payment application.
OSP.TOE_USAGE
The customer never reveals their Personal Code so that an attacker is unable to grant the rights of
the legitimate customer to submit unauthorised transactions on his/her behalf. The customer shall
respect the security rules given by the Issuing Bank.
OSP.PISHING
The Bank shall forbid remote payments (e.g. internet transactions), Mail Order / Telephone Order
(MOTO), cash advance, quasi-cash and ATM cash withdrawal) so that an attacker cannot forge a
message for the legitimate customer by usurpating his bank's identity in order to obtain desired
information from him (name, address, PAN, activation code).
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 59 / 133
No disclosure to a third party without prior written consent of Gemalto
4.4.3 MERCHANT
OSP.MERCHANT_CONTROL
The Acquirer applies a specific security policy regarding the secure usage of the POS by the
Merchant.
Application Note:
The Acquirer's role is:
 acquires and processes clearing transaction files;
 forwards authorisation and clearing messages from the Merchant point of sale to the
Issuing Bank through a Payment Scheme network;
 provides an accurate and reliable transaction flow transmission from the Merchant POS to
the Issuing Bank;
 provides a POS terminal compliant with the Payment Scheme requirements and with the
functionalities defined within the Payez Mobile specifications.
4.4.4 BANK
OSP.BANKS_PRIVILEGES
The Issuing Bank has specific privileges. For instance:
 the ability to request the value of the ATC and Offline counters. That request should be
done randomly or on response to an incident reported by the customer;
 the ability to reset offline counters through OTA bearer;
 the ability to perform complete personnalisation of its dedicated payment application
through OTA bearer.
4.5 Assumptions
A.MERCHANT_AUTH
Merchant contract subscription guarantees the authenticity of the Merchant.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 60 / 133
No disclosure to a third party without prior written consent of Gemalto
5 Security Objectives
5.1 Security Objectives for the TOE
5.1.1 TRANSACTION PROTECTION
O.TRANSACTION_UNIQUENESS
The TOE shall preserve the uniqueness of a transaction by limiting the probability of generating two
identical copies of transactions certificates.
O.TRANSACTION_INTEGRITY
The TOE shall preserve the integrity of transactions and the integrity of all certified terms of the
transactions.
O.TRANSACTION_BYPASS
The TOE shall prevent from bypassing a mandatory step of the transaction flow model as defined
by the [PM-1] and [PM-2] specifications.
O.TRANSACTION_REPLAY
The TOE shall detect and reject replayed transactions.
5.1.2 AUTHENTICATION
O.USER_AUTH
The TOE shall provide customer authentication means for Personal Code change/unblock and for
each payment transaction above the Personal Code Entry Limit.
Application Note:
No further customer authentication attempts shall be possible once the maximal number of
attempts has been reached, until a special action is performed by a privileged user.
O.ISSUING_BANK_AUTH
The TOE shall authenticate the Issuing Bank before processing administration transactions.
O.MNO_AUTH
The TOE shall authenticate the MNO before granting him access to its services.
Handled by the (U)SIM platform (see O.COMM_AUTH in [PP USIM])
5.1.3 EXECUTION PROTECTION
The correct execution of the services provided by the PAP, applications resources control and
applications isolation are handled by the (U)SIM platform on which the payment application package is
embedded. They are satisfied by technical countermeasures implemented by the (U)SIM platform. [PP
USIM]
O.AUTHORISATION_CONTROL
The consistency of payment transactions shall be checked according to Payez Mobile
specifications [PM-1] and [PM-2] before granting the customer the authorisation to submit payment
transactions.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 61 / 133
No disclosure to a third party without prior written consent of Gemalto
5.1.4 DATA PROTECTION
O.DATA_DISCLOSURE
The TOE shall avoid unauthorised disclosure of TSF data stored and manipulated by the TOE and
that must be protected in confidentiality.
Application Note:
This security objective is partially handled by the (U)SIM platform regarding physical attacks and
unobservability of secrets.
O.DATA_INTEGRITY
The TOE shall avoid unauthorised modification of user data and TSF data managed or
manipulated by the TOE.
O.DATA_USERS
The TOE shall ensure that user data are only accessed by authorised users.
5.1.5 RISK MANAGEMENT
O.RISK_MNGT
The TOE security functions behavior is limited by maximum values of risk management counters
(number of transactions without authorisation, the aggregated amount without authorisation) that
trigger an online authorisation request. These mechanisms are valid regardless the amount of the
payment transaction.
O.APP_BLOCK
The TOE shall grant an authorised user the privilege to block the PAP and its data in a way to
prohibit a positive response to payment authorisation requests. This is remotely operated through
OTA bearer.
O.SIM_UNLOCK
The TOE shall require unlocking the (U)SIM card (by means of the PIN code) for each payment
transaction.
Application Note:
Handled by the (U)SIM platform (see O.COMM_AUTH in [PP USIM])
O.AUDIT
The TOE shall record transactions to support effective security management.
O.CHANNELS
The TOE shall provide the means to identify the origin of a communication request intended to be
routed by a specific communication channel (e.g. SWP for communications between the (U)SIM
and the NFC Controller).
O.AUDIT_ACCESS
The TOE shall grant the customer access to log files in order to check the history of payment
transactions that he has made lately.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 62 / 133
No disclosure to a third party without prior written consent of Gemalto
5.1.6 GUI
O.GUIS_AUTH
The TOE ((U)SIM Platform and PAP) shall authenticate the GUIs authorised to communicate with
the applications of (U)SIM card (Cardlets) before granting them access to its functionalities. The
applications shall only accept communication from authenticated GUIs.
Application Note:
Handled by the (U)SIM platform (see O.APPLI_AUTH and O.COMM_AUTH in [PP USIM])
This security objective is handled by the (U)SIM platform..
5.2 Security objectives for the Operational Environment
5.2.1 HANDSET
OE.CUSTOMER_PC_CONFID
The mobile handset shall preserve the customer's Personal Code from disclosure during its
transmission to the PAP in order to be compared with the Reference Personal Code. Thus, the
mobile handset shall never keep the customer's Personal Code in its memory.
OE.GUI_INST_ALERT
The mobile handset shall provide mechanisms for determining the legitimacy of an installed GUI,
alerting the customer on application installation attempts.
OE.TOE_USAGE
The Issuing Bank shall communicate to the customer the rules dealing with the use of the PAP.
Especially it must inform the customer that he must not divulgate his Personal Code to anyone.
The customer shall enforce these rules.
OE.GUIS_IDENTIFICATION
The handset shall implement an access control mechanism that identifies GUIs authorised to
communicate with the TOE (Cardlets).
OE.POLICY
The mobile handset shall implement a security policy and a control access policy to resources
((U)SIM, network,etc)
OE.NFC_PROTOCOL
The implementation of NFC protocol shall be compliant with ISO 14443. In particular, payment
transactions shall be disabled beyond a given distance.
OE.TRANSACTION_DISPLAY
Related payment transaction information (amount, transaction status, etc) shall be systematically
displayed on the screen of the customers mobile handset before or after the transaction.
OE.CHANNELS_SELECTION
The mobile handset shall provide the means to the customer to fix the communication channels
that permit to communicate with the TOE (eg NFC, OTA, Bluetooth).
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 63 / 133
No disclosure to a third party without prior written consent of Gemalto
OE.GUIS_TIMEOUT
The GUIs shall detect when Personal Code Timeout limit values and unsuccessful authentication
attempts occur related to the Personal Code timeout session. When the defined number of
unsuccessful authentication attempts has been surpassed, the GUI shall request the Personal
Code again.
5.2.2 MERCHANT
OE.MERCHANT_CONTROL
In particular, a specific security policy shall be established by the Acquirer regarding the secure
usage of the POS, by controlling the Merchants transactions flow in order to detect suspicious
behavior.
Application Note:
For instance, by controlling Merchants accepting small payments amounts.
OE.MERCHANT_AUTH
The merchant shall subscribe for a contract that guarantees his authenticity.
OE.LATENCY_CONTROL
The POS terminal shall implement time-out mechanisms that disable NFC transactions with low
latency.
OE.POS_APPROVAL
Payment terminals accepting Payez Mobile payment transactions shall be approved by a reference
body.
OE.POS_APPLICATIONS
The contactless payment applications embedded in the POS terminal shall be protected in integrity
and authenticity.
Application Note:
For instance, those applications are signed by a trusted third party and their signature is checked
during installation process.
OE.POS_DEACTIVATION
Any POS terminal may be rendered inoperative remotely by the POS purchaser or the Acquirer.
5.2.3 MANAGEMENT
OE.CERTIFICATES_MNGT
The lifetime of the (EMV-CDA) authentication certificates with the payment terminal shall be
variable according to the type of the payment application (transaction amount, application lifetime),
and the (U)SIM card (lifetime). These certificates shall be updated via OTA during the term of the
contract signed with the customer.
OE.Contactless_life cycle_MNGT
Upon a new activation request, Payez Mobile application is responsible for managing the
deactivation of the current activated PAP. The Payez Mobile application shall guarantee that only
one PAP is activated at any given time.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 64 / 133
No disclosure to a third party without prior written consent of Gemalto
5.2.4 BANK
OE.NO_VAD
Remote payments (e.g. internet transactions), Mail Order / Telephone Order (MOTO), cash
advance, quasi-cash and ATM cash withdrawal) shall be forbidden by the banks for PAP
payments. Only proximity purchase transactions shall be authorised.
OE.BANKS_PRIVILEGES
The Issuing Bank shall be granted specific privileges.
5.3 Security Objectives Rationale
5.3.1 Threats
5.3.1.1 DISCLOSURE
T.DISCLOSURE_KEYS This threat is covered by the security objective O.DATA_DISCLOSURE
which guarantees the secrecy of the keys stored in the TOE.
The security objective O.ISSUING_BANK_AUTH ensures that nobody but the Issuing Bank can
operates on PAP cryptographic keys stored in the TOE.
The security objective on the operational environment OE.CERTIFICATES_MNGT also contributes
in covering this threat by guaranteeing that certificates are updated and thus prevent from reusing
a disclosed key.
T.DISCLOSURE_REF_PC This threat is covered by the security objective O.DATA_DISCLOSURE
which guarantees the secrecy of the Reference Personal Code stored in the TOE.
The security objectives O.ISSUING_BANK_AUTH and O.USER_AUTH ensures that nobody but
the Issuing Bank or the Customer can operate on the Personal Code.
5.3.1.2 INTEGRITY
T.INTEG_LOG_FILE This threat is covered by the security objective O.DATA_INTEGRITY which
prevents from unauthorised modification of log files stored in the TOE.
The security objectives O.GUIS_AUTH and O.ISSUING_BANK_AUTH contribute in covering this
threat by ensuring that only authorised users can get access to log files.
T.INTEG_KEYS This threat is covered by the security objective O.DATA_INTEGRITY which prevents
from unauthorised modification of keys stored in the TOE.
The security objectives O.USER_AUTH, O.GUIS_AUTH, O.MNO_AUTH and
O.ISSUING_BANK_AUTH contribute in covering this threat by ensuring that only authorised users
can get access to the TOE.
T.INTEG_ACCOUNT_INFO This threat is covered by the security objective O.DATA_INTEGRITY
which prevents from unauthorised modification of the customer account information stored in the
TOE.
The security objectives O.USER_AUTH, O.GUIS_AUTH and O.ISSUING_BANK_AUTH contribute
in covering this threat by ensuring that only authorised users can get access to the TOE.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 65 / 133
No disclosure to a third party without prior written consent of Gemalto
T.INTEG_REF_PC This threat is covered by the security objective O.DATA_INTEGRITY which
prevents from unauthorised modification of Reference Personal Code stored in the TOE.
The security objectives O.USER_AUTH, O.GUIS_AUTH and O.ISSUING_BANK_AUTH contribute
in covering this threat by ensuring that only authorised users can get access to the TOE.
T.INTEG_TRANS_PARAM This threat is covered by the security objective O.DATA_INTEGRITY
which prevents from unauthorised modification of transaction parameters stored in the TOE.
The security objective O.TRANSACTION_BYPASS covers this threat by preventing from
bypassing a mandatory step of the transaction flow model as defined by the [PM-1]&[PM-2]
specifications and though ensuring the integrity of transaction parameters.
The security objectives O.USER_AUTH, O.GUIS_AUTH and O.ISSUING_BANK_AUTH contribute
in covering this threat by ensuring that only authorised users can get access to the TOE.
T.INTEG_COUNT This threat is covered by the security objective O.DATA_INTEGRITY which
prevents from unauthorised modification of PAP counters stored in the TOE.
The security objective O.TRANSACTION_BYPASS covers this threat by preventing from
bypassing a mandatory step of the transaction flow model as defined by the [PM-1]&[PM-2]
specifications and though ensuring the integrity of PAP counters.
The security objectives O.USER_AUTH, O.GUIS_AUTH and O.ISSUING_BANK_AUTH contribute
in covering this threat by ensuring that only authorised users can get access to the TOE.
T.TEMPORARY_DATA This threat is covered by the security objectives O.DATA_INTEGRITY and
O.TRANSACTION_INTEGRITY which prevent from unauthorised modification of transactions and
related temporary data.
The security objectives O.USER_AUTH, O.GUIS_AUTH and O.ISSUING_BANK_AUTH contribute
in covering this threat by ensuring that only authorised users can get access to the TOE.
T.INTEG_SEL_ACT_PARAM This threat is covered by the security objective O.DATA_INTEGRITY
which prevents from unauthorised modification of selection and activation parameters stored in the
TOE.
The security objectives O.USER_AUTH, O.GUIS_AUTH and O.ISSUING_BANK_AUTH contribute
in covering this threat by ensuring that only authorised users can get access to the TOE.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 66 / 133
No disclosure to a third party without prior written consent of Gemalto
5.3.1.3 FRAUDULENT PAYMENT
T.STEALING This threat is countered by:
O.RISK_MNGT which diminishes payment temptations by limiting the number of transactions
without authorisation.
O.APP_BLOCK which provides the Issuing Bank means to block the PAP through OTA bearer on
the user's demand.
O.USER_AUTH which ensures that the customer is authenticated for each payment transaction
above the Personal Code Entry Limit
OE.TOE_USAGE which ensures that the Issuing Bank provides to the customer the rules to
securely use his TOE.
OE.CUSTOMER_PC_CONFID which guarantees that the mobile handset never keeps the
customer's Personal Code in its memory.
OE.CERTIFICATES_MNGT that contributes in covering this threat by avoiding the usage of a
stolen authentication certificates by providing updates.
T.MERCHANT_ACCOMPLICE This threat is covered by the security objective O.SIM_UNLOCK which
requires unlocking the (U)SIM card (by means of the PIN code) for each payment transaction.
The security objective O.APP_BLOCK provides the means to authorised users to block the PAP in
order to prevent from such attacks.
The security objective on the environment OE.MERCHANT_AUTH ensure that merchant shall
subscribe for a contract that guarantees his authenticity.
The security objectives for the environment OE.POS_DEACTIVATION, OE.POS_APPROVAL and
OE.POS_APPLICATIONS ensure respectively that the POS may be rendered inoperative remotely
by the POS purchaser or the Acquirer, that payment terminals accepting Payez Mobile payment
transactions are approved by a reference body, and that the contactless payment applications
embedded in the POS terminal is protected in integrity and authenticity.
T.MAN-IN-THE-MIDDLE This threat is covered by the following security objectives:
O.CHANNELS that provides the means to identify the origin of a communication request intended
to be routed by a specific communication channel which decrease the probability of realizing
such attacks
O.USER_AUTH contributes in covering this threat by ensuring that the customer is authenticated
before performing a payment transaction
O.AUDIT_ACCESS grants the customer access to log files in order to check the history of payment
transactions so that he can check if no fraudulent transaction has been made
O.AUDIT records transaction to support security management
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 67 / 133
No disclosure to a third party without prior written consent of Gemalto
OE.LATENCY_CONTROL which ensure that the POS terminal implements time-out mechanisms
that disables NFC transactions with low latency and thus detects such attack
OE.NFC_PROTOCOL which ensures that payment transactions are disabled beyond a given
distance
OE.GUI_INST_ALERT which guarantees the legitimacy of installed GUIs
OE.TRANSACTION_DISPLAY contributes in covering this threat by displaying related payment
transaction information (amount, transaction status) on the screen of the customers mobile
handset before or after the transaction
T.TRANSACTION_REPUDIATION This threat is countered by:
O.DATA_USERS that prevents the use of the TOE by unauthorised users because they do not
have the required rights to perform transactions
O.USER_AUTH that requires the authentication of the customer before performing any transaction
OE.TOE_USAGE which ensures that the Issuing Bank provides to the customer the rules to
securely use his PAP and especially that he must not provide his Personal Code to anyone.
Thus, if the Personal Code has been entered, kept secure and an authenticated
communication has been used, the transaction cannot be repudiated.
O.AUDIT ensures that the TOE shall record transactions to prevent from repudiation.
T.TRANSACTION_COUNTERFEITING This threat is covered by the following security objectives:
O.DATA_USERS that prevents the use of the TOE by unauthorised users because they do not
have the required rights to perform transactions
O.AUTHORISATION_CONTROL which guarantees that the consistency of payment transactions is
checked according to Payez Mobile specifications [PM-1]&[PM-2] before granting the customer
the authorisation to submit payment transactions.
O.RISK_MNGT which avoids improper conditions of using the PAP and ensures that only possible
parameters values must be valid and correspond to secure configurations
O.APP_BLOCK provides the means to authorised users to block the PAP in order to prevent from
counterfeiting.
O.USER_AUTH contributes in covering this threat by ensuring that only the customer can submit
transactions.
O.AUDIT ensures that the TOE shall record transactions to detect counterfeiting.
O.TRANSACTION_BYPASS covers this threat by preventing from bypassing a mandatory step of
the transaction flow model as defined by the [PM-1]&[PM-2] specifications and though
preventing from counterfeiting of payment transactions.
O.DATA_DISCLOSURE that guarantees the secrecy of the keys stored in the TOE.
O.ISSUING_BANK_AUTH that ensures that nobody but the Issuing Bank can operate on PAP
cryptographic keys stored in the TOE.
OE.CERTIFICATES_MNGT that contributes in covering this threat by avoiding the usage of a
counterfeited authentication certificates by providing updates.
OE.MERCHANT_CONTROL ensures that the merchant maintains a specific security policy that
ensures a secure usage of the POS terminal.
T.TRANSACTION_REPLAY This threat is covered by the following security objectives:
O.TRANSACTION_REPLAY which ensures that replayed transactions will be detected and
rejected by the TOE.
O.TRANSACTION_UNIQUENESS which reserves the uniqueness of a transaction; this by limiting
the probability of generating two identical copies of transactions certificates.
O.USER_AUTH contributes in covering this threat by ensuring that only the customer can submit
transactions.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 68 / 133
No disclosure to a third party without prior written consent of Gemalto
O.TRANSACTION_BYPASS covers this threat by preventing from bypassing a mandatory step of
the transaction flow model as defined by the [PM-1]&[PM-2] specifications and though
preventing from replaying a payment transaction.
O.SIM_UNLOCK requires unlocking the (U)SIM card (by means of the PIN code) for each payment
transaction. This threat could be covered by the (U)SIM platform security functions;
5.3.1.4 DENIAL-OF-SERVICE
T.CERTIF_CORRUPTION This threat is covered by the security objective
O.TRANSACTION_INTEGRITY that preserves the integrity of transactions and the integrity of all
certified terms of the transactions.
The security objective O.TRANSACTION_UNIQUENESS contributes in covering this threat by
preserving the uniqueness of a transaction by limiting the probability of generating two identical
copies of transactions certificates.
T.APPLICATIONS_DOS This threat is covered by the following security objectives:
O.CHANNELS that provides the means to identify the origin of a communication request intended
to be routed by a specific communication channel which decrease the probability of realizing
such attacks
O.USER_AUTH contributes in covering this threat by ensuring that the customer is authenticated
before performing a payment transaction
OE.GUI_INST_ALERT which guarantees the legitimacy of installed GUIs
O.GUIS_AUTH which ensures that the GUIs authorised to communicate with the applications of
(U)SIM card are authenticated before granting them access to its functionalities; thus it prevents
from such attacks.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 69 / 133
No disclosure to a third party without prior written consent of Gemalto
5.3.1.5 IDENTITY_USURPATION
T.MNO_USURPATION This threat is covered by the security objective O.TRANSACTION_BYPASS
which prevent from bypassing a mandatory step of the transaction flow model as defined by the
[PM-1]&[PM-2] specifications and though preventing from identity usurpation. O.MNO_AUTH
contributes in covering this threat by ensuring that only the MNO can have access to its services.
T.ISSUING-BANK_USURPATION This threat is covered by the security objective
O.TRANSACTION_BYPASS which prevent from bypassing a mandatory step of the transaction
flow model as defined by the [PM-1]&[PM-2] specifications and though preventing from identity
usurpation. O.ISSUING_BANK_AUTH contributes in covering this threat by ensuring that only the
Issuing Bank can have access to its services.
T.CUSTOMER_USURPATION This threat is covered by the following security objectives:
O.TRANSACTION_BYPASS which prevent from bypassing a mandatory step of the transaction
flow model as defined by the [PM] specifications and though preventing from identity
usurpation
O.USER_AUTH contributes in covering this threat by ensuring that only the end user can have
access to its services
O.AUDIT_ACCESS which guarantees that the end user has access to log files in order to check
the history of payment transactions that he has made lately and thus prevents from identity
usurpation
The security objective on the environment of the TOE OE.GUIS_TIMEOUT contributes to detect
previous usurpation, in covering this threat by controlling Personal Code unsuccessful entry
attempts.
5.3.2 Organisational Security Policies
5.3.2.1 HANDSET
OSP.POLICY This OSP is directly upheld by the security objective OE.POLICY.
OSP.CUSTOMER_PC_CONFID This OSP is directly upheld by the security objective
OE.CUSTOMER_PC_CONFID.
OSP.GUIS_IDENTIFICATION This OSP is directly upheld by the security objective
OE.GUIS_IDENTIFICATION.
5.3.2.2 MANAGEMENT
OSP.CERTIFICATES_MNGT This OSP is directly upheld by the security objective
OE.CERTIFICATES_MNGT.
OSP.Contactless_life cycle_MNGT This OSP is directly upheld by the security objective
OE.Contactless_life cycle_MNGT.
OSP.TOE_USAGE This OSP is directly upheld by the security objective OE.TOE_USAGE.
OSP.PISHING This security policy is covered by the security objective on the environment
OE.NO_VAD which guarantees that only proximity purchase transactions are authorised.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 70 / 133
No disclosure to a third party without prior written consent of Gemalto
5.3.2.3 MERCHANT
OSP.MERCHANT_CONTROL This OSP is directly upheld by the security objective on the
environment OE.MERCHANT_CONTROL. The security objectives on the environment
OE.POS_APPROVAL and OE.POS_APPLICATIONS ensures that POS terminals accepting Payez
Mobile payment transactions are approved by a reference body and that the contactless payment
applications embedded in these POS terminals are protected in integrity and authenticity.
5.3.2.4 BANK
OSP.BANKS_PRIVILEGES This OSP is directly upheld by the security objective
OE.BANKS_PRIVILEGES (refer to O.ISSUING_BANK_AUTH which requires the TOE to authenticate
the Issuing Bank before processing administration transactions, and thus provide services only
granted to the Issuing Bank, such as request or reset of counters.).
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 71 / 133
No disclosure to a third party without prior written consent of Gemalto
5.3.3 Assumptions
A.MERCHANT_AUTH This assumption is enforced by the security objectives on the environment
OE.MERCHANT_AUTH and OE.POS_APPLICATIONS which guarantees the authenticity of the
merchant and the applications installed on the POS terminal handled by the merchant.
5.3.4 SPD and Security Objectives
Threats Security Objectives Rationale
T.DISCLOSURE_KEYS
OE.CERTIFICATES_MNGT,
O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE
Section
5.3.1
T.DISCLOSURE_REF_PC
O.ISSUING_BANK_AUTH, O.USER_AUTH,
O.DATA_DISCLOSURE
Section
5.3.1
T.INTEG_LOG_FILE
O.DATA_INTEGRITY,
O.ISSUING_BANK_AUTH
Section
5.3.1
T.INTEG_KEYS
O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY, O.USER_AUTH,
O.MNO_AUTH
Section
5.3.1
T.INTEG_ACCOUNT_INFO
O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY, O.USER_AUTH
Section
5.3.1
T.INTEG_REF_PC
O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY, O.USER_AUTH
Section
5.3.1
T.INTEG_TRANS_PARAM
O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY,
O.TRANSACTION_BYPASS,
O.USER_AUTH
Section
5.3.1
T.INTEG_COUNT
O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY,
O.TRANSACTION_BYPASS,
O.USER_AUTH
Section
5.3.1
T.TEMPORARY_DATA
O.TRANSACTION_INTEGRITY,
O.USER_AUTH,
O.GUIS_AUTH,
O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY
Section
5.3.1
T.INTEG_SEL_ACT_PARAM
O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY, O.USER_AUTH
Section
5.3.1
T.STEALING
OE.TOE_USAGE, O.RISK_MNGT,
OE.CUSTOMER_PC_CONFID,
OE.CERTIFICATES_MNGT,
O.APP_BLOCK, O.USER_AUTH
Section
5.3.1
T.MERCHANT_ACCOMPLICE
O.SIM_UNLOCK, O.APP_BLOCK,
OE.POS_DEACTIVATION,
OE.MERCHANT_AUTH,
OE.POS_APPLICATIONS,
OE.POS_APPROVAL
Section
5.3.1
T.MAN-IN-THE-MIDDLE
O.CHANNELS, OE.NFC_PROTOCOL,
OE.LATENCY_CONTROL,
OE.GUI_INST_ALERT,
OE.TRANSACTION_DISPLAY,
O.USER_AUTH, O.AUDIT_ACCESS,
Section
5.3.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 72 / 133
No disclosure to a third party without prior written consent of Gemalto
Threats Security Objectives Rationale
O.AUDIT
T.TRANSACTION_REPUDIATION
O.DATA_USERS, OE.TOE_USAGE,
O.USER_AUTH, O.AUDIT
Section
5.3.1
T.TRANSACTION_COUNTERFEITING
O.DATA_USERS,
OE.CERTIFICATES_MNGT,
O.AUTHORISATION_CONTROL,
O.RISK_MNGT,
OE.MERCHANT_CONTROL,
O.APP_BLOCK, O.USER_AUTH, O.AUDIT,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE,
O.ISSUING_BANK_AUTH
Section
5.3.1
T.TRANSACTION_REPLAY
O.TRANSACTION_REPLAY,
O.TRANSACTION_UNIQUENESS,
O.SIM_UNLOCK, O.USER_AUTH,
O.TRANSACTION_BYPASS
Section
5.3.1
T.CERTIF_CORRUPTION
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_UNIQUENESS
Section
5.3.1
T.APPLICATIONS_DOS
O.CHANNELS, OE.GUI_INST_ALERT,
O.USER_AUTH,
Section
5.3.1
T.MNO_USURPATION O.MNO_AUTH, O.TRANSACTION_BYPASS
Section
5.3.1
T.ISSUING-BANK_USURPATION
O.ISSUING_BANK_AUTH,
O.TRANSACTION_BYPASS
Section
5.3.1
T.CUSTOMER_USURPATION
O.USER_AUTH, OE.GUIS_TIMEOUT,
O.AUDIT_ACCESS,
O.TRANSACTION_BYPASS
Section
5.3.1
Table 7: Threats and Security Objectives - Coverage
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 73 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Threats
O.TRANSACTION_UNIQUENESS
T.TRANSACTION_REPLAY,
T.CERTIF_CORRUPTION
O.TRANSACTION_INTEGRITY
T.TEMPORARY_DATA,
T.CERTIF_CORRUPTION
O.TRANSACTION_BYPASS
T.INTEG_TRANS_PARAM,
T.INTEG_COUNT,
T.TRANSACTION_COUNTERFEITING,
T.TRANSACTION_REPLAY,
T.MNO_USURPATION, T.ISSUING-
BANK_USURPATION,
T.CUSTOMER_USURPATION
O.TRANSACTION_REPLAY T.TRANSACTION_REPLAY
O.USER_AUTH
T.DISCLOSURE_REF_PC, T.INTEG_KEYS,
T.INTEG_ACCOUNT_INFO,
T.INTEG_REF_PC,
T.INTEG_TRANS_PARAM,
T.INTEG_COUNT, T.TEMPORARY_DATA,
T.INTEG_SEL_ACT_PARAM, T.STEALING,
T.MAN-IN-THE-MIDDLE,
T.TRANSACTION_REPUDIATION,
T.TRANSACTION_COUNTERFEITING,
T.TRANSACTION_REPLAY,
T.APPLICATIONS_DOS,
T.CUSTOMER_USURPATION
O.ISSUING_BANK_AUTH
T.DISCLOSURE_KEYS,
T.DISCLOSURE_REF_PC,
T.INTEG_LOG_FILE, T.INTEG_KEYS,
T.INTEG_ACCOUNT_INFO,
T.INTEG_REF_PC,
T.INTEG_TRANS_PARAM,
T.INTEG_COUNT, T.TEMPORARY_DATA,
T.INTEG_SEL_ACT_PARAM, T.ISSUING-
BANK_USURPATION
O.MNO_AUTH T.INTEG_KEYS, T.MNO_USURPATION
O.AUTHORISATION_CONTROL T.TRANSACTION_COUNTERFEITING
O.DATA_DISCLOSURE
T.DISCLOSURE_KEYS,
T.DISCLOSURE_REF_PC
O.DATA_INTEGRITY
T.INTEG_LOG_FILE, T.INTEG_KEYS,
T.INTEG_ACCOUNT_INFO,
T.INTEG_REF_PC,
T.INTEG_TRANS_PARAM,
T.INTEG_COUNT, T.TEMPORARY_DATA,
T.INTEG_SEL_ACT_PARAM
O.DATA_USERS
T.TRANSACTION_REPUDIATION,
T.TRANSACTION_COUNTERFEITING
O.RISK_MNGT
T.STEALING,
T.TRANSACTION_COUNTERFEITING
O.APP_BLOCK
T.STEALING,
T.MERCHANT_ACCOMPLICE,
T.TRANSACTION_COUNTERFEITING
O.SIM_UNLOCK T.MERCHANT_ACCOMPLICE,
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 74 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Threats
T.TRANSACTION_REPLAY
O.AUDIT
T.TRANSACTION_REPUDIATION,
T.TRANSACTION_COUNTERFEITING
O.CHANNELS
T.MAN-IN-THE-MIDDLE,
T.APPLICATIONS_DOS
O.AUDIT_ACCESS
T.MAN-IN-THE-MIDDLE,
T.CUSTOMER_USURPATION
O.GUIS_AUTH
T.INTEG_LOG_FILE
T.INTEG_KEYS
T.INTEG_ACCOUNT_INFO
T.INTEG_REF_PC
T.INTEG_TRANS_PARAM
T.INTEG_COUNT
T.INTEG_SEL_ACT_PARAM
T.APPLICATIONS_DOS
T.TEMPORARY_DATA
OE.CUSTOMER_PC_CONFID T.STEALING
OE.GUI_INST_ALERT
T.MAN-IN-THE-MIDDLE,
T.APPLICATIONS_DOS
OE.TOE_USAGE
T.STEALING,
T.TRANSACTION_REPUDIATION
OE.GUIS_IDENTIFICATION
OE.POLICY
OE.NFC_PROTOCOL T.MAN-IN-THE-MIDDLE
OE.TRANSACTION_DISPLAY T.MAN-IN-THE-MIDDLE
OE.CHANNELS_SELECTION
OE.GUIS_TIMEOUT
T.MAN-IN-THE-MIDDLE,
T.CUSTOMER_USURPATION
OE.MERCHANT_CONTROL T.TRANSACTION_COUNTERFEITING
OE.MERCHANT_AUTH T.MERCHANT_ACCOMPLICE
OE.LATENCY_CONTROL T.MAN-IN-THE-MIDDLE
OE.POS_APPROVAL T.MERCHANT_ACCOMPLICE
OE.POS_APPLICATIONS T.MERCHANT_ACCOMPLICE
OE.POS_DEACTIVATION T.MERCHANT_ACCOMPLICE
OE.CERTIFICATES_MNGT
T.DISCLOSURE_KEYS, T.STEALING,
T.TRANSACTION_COUNTERFEITING
OE.Contactless_life cycle_MNGT
OE.NO_VAD
OE.BANKS_PRIVILEGES
Table 8: Security Objectives and Threats - Coverage
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 75 / 133
No disclosure to a third party without prior written consent of Gemalto
Organisational Security
Policies
Security Objectives Rationale
OSP.POLICY OE.POLICY
Section
5.3.2
OSP.CUSTOMER_PC_CONFID OE.CUSTOMER_PC_CONFID
Section
5.3.2
OSP.GUIS_IDENTIFICATION OE.GUIS_IDENTIFICATION
Section
5.3.2
OSP.CERTIFICATES_MNGT OE.CERTIFICATES_MNGT
Section
5.3.2
OSP.Contactless_life
cycle_MNGT
OE.Contactless_life cycle_MNGT
Section
5.3.2
OSP.TOE_USAGE OE.TOE_USAGE
Section
5.3.2
OSP.PISHING OE.NO_VAD
Section
5.3.2
OSP.MERCHANT_CONTROL
OE.MERCHANT_CONTROL,
OE.POS_APPROVAL, OE.POS_APPLICATIONS
Section
5.3.2
OSP.BANKS_PRIVILEGES OE.BANKS_PRIVILEGES
Section
5.3.2
Table 9: OSPs and Security Objectives - Coverage
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 76 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Organisational Security Policies
O.TRANSACTION_UNIQUENESS
O.TRANSACTION_INTEGRITY
O.TRANSACTION_BYPASS
O.TRANSACTION_REPLAY
O.USER_AUTH
O.ISSUING_BANK_AUTH
O.MNO_AUTH
O.AUTHORISATION_CONTROL
O.DATA_DISCLOSURE
O.DATA_INTEGRITY
O.DATA_USERS
O.RISK_MNGT
O.APP_BLOCK
O.SIM_UNLOCK
O.AUDIT
O.CHANNELS
O.AUDIT_ACCESS
O.GUIS_AUTH
OE.CUSTOMER_PC_CONFID OSP.CUSTOMER_PC_CONFID
OE.GUI_INST_ALERT
OE.TOE_USAGE OSP.TOE_USAGE
OE.GUIS_IDENTIFICATION OSP.GUIS_IDENTIFICATION
OE.POLICY OSP.POLICY
OE.NFC_PROTOCOL
OE.TRANSACTION_DISPLAY
OE.CHANNELS_SELECTION
OE.GUIS_TIMEOUT
OE.MERCHANT_CONTROL OSP.MERCHANT_CONTROL
OE.MERCHANT_AUTH
OE.LATENCY_CONTROL
OE.POS_APPROVAL OSP.MERCHANT_CONTROL
OE.POS_APPLICATIONS OSP.MERCHANT_CONTROL
OE.POS_DEACTIVATION
OE.CERTIFICATES_MNGT OSP.CERTIFICATES_MNGT
OE.Contactless_life cycle_MNGT OSP.Contactless_life cycle_MNGT
OE.NO_VAD OSP.PISHING
OE.BANKS_PRIVILEGES OSP.BANKS_PRIVILEGES
Table 10: Security Objectives and OSPs - Coverage
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 77 / 133
No disclosure to a third party without prior written consent of Gemalto
Assumptions Security Objectives for the Operational Environment Rationale
A.MERCHANT_AUTH OE.MERCHANT_AUTH, OE.POS_APPLICATIONS Section 5.3.3
Table 11: Assumptions and Security Objectives for the Operational Environment -
Coverage
Security Objectives for the Operational
Environment
Assumptions
OE.CUSTOMER_PC_CONFID
OE.GUI_INST_ALERT
OE.TOE_USAGE
OE.GUIS_IDENTIFICATION
OE.POLICY
OE.NFC_PROTOCOL
OE.TRANSACTION_DISPLAY
OE.CHANNELS_SELECTION
OE.GUIS_TIMEOUT
OE.MERCHANT_CONTROL
OE.MERCHANT_AUTH A.MERCHANT_AUTH
OE.LATENCY_CONTROL
OE.POS_APPROVAL
OE.POS_APPLICATIONS A.MERCHANT_AUTH
OE.POS_DEACTIVATION
OE.CERTIFICATES_MNGT
OE.Contactless_life cycle_MNGT
OE.NO_VAD
OE.BANKS_PRIVILEGES
Table 12: Security Objectives for the Operational Environment and Assumptions -
Coverage
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 78 / 133
No disclosure to a third party without prior written consent of Gemalto
6 Security Requirements
6.1 Security Functional Requirements
This section defines the security fonctional requirements (SFR) and the EAL. It provides the rationale
between security objectives and SFRs, and the SFRs dependencies rationale.
The following two tables define the operations and security attributes involved in the Access Control
and Information Control Policies for the product. The subjects, objects and information are given
together with the definition of each particular policy.
Operation Access Control SFP
Information Flow Control
SFP
PAP Selection
PAP Application / PAP
Activation
PAP Activation/Deactivation -
PAP Locking/Unlocking
PAP Application / PAP
Administration Management
Systematic Personal Code
Activation
PAP Application / PAP
Administration Management
Personal Code Presentation for
Payment
PAP Application / PAP Payment
Transaction Management
Personal Code Verification
PAP Application / PAP Payment
Transaction Management
Log Update
PAP Application / PAP Payment
Transaction Management
Log Reading
PAP Application / PAP
Administration Management
Reference Personal Code
Change/Unblock
PAP Application / PAP
Administration Management
Counter Reset
PAP Application / Post-Issuance
Bank Management
Post-Issuance Bank
Management
Audit (Log creation)
PAP Application / Post-Issuance
Bank Management
Post-Issuance Bank
Management
PAP Offline Data Authentication
PAP Application / PAP Offline
Authentication / PAP
Transaction
PAP Offline Authentication
PAP Action Analysis
PAP Application / PAP
Transaction
PAP Offline Transaction /
PAP Online Transaction
PAP Offline Transaction
PAP Application / PAP
Transaction
PAP Offline Transaction
PAP Online Transaction
PAP Application / PAP
Transaction
PAP Online Transaction
Issuing Bank Script Processing
Post-Issuance Bank
Management
Post-Issuance Bank
Management
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 79 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Attributes Values
Contactless Life Cycle State
INSTALLED - ACTIVATED / DEACTIVATED - NON-
ACTIVATABLE – LOCKED
(U)SIM Card Life Cycle Status SELECTED / BLOCKED / NOT BLOCKED
PAP Transaction Processing
State
Complies with [PM-1]&[PM-2] and indicates results of transaction
processing steps / Does not comply with [PM-1]&[PM-2]
PAP Transaction Parameters
Integrity
VERIFIED / NOT VERIFIED / CORRUPTED
PAP Transaction Parameters
State
Issuing Bank risk management parameter value
PAP Keys Integrity VERIFIED / NOT VERIFIED / CORRUPTED
PAP Reference Personal Code
State
BLOCKED / UNBLOCKED
Systematic Personal Code
State
ENABLED / DISABLED
PAP Reference Personal Code
Integrity
VERIFIED / NOT VERIFIED / CORRUPTED
PAP Personal Code State
VERIFIED / NOT VERIFIED / ALWAYS REQUESTED /
REQUESTED AT THE NEXT PAYMENT
PAP Personal Code Entry
Amount
GREATER / LESSER THAN PERSONAL CODE ENTRY LIMIT
VALUE
PAP Customer Account
Information Integrity
VERIFIED / NOT VERIFIED / CORRUPTED
Log File Reading Status PERMITTED (Log entry data is present) / NOT PERMITTED
Log File Update Status ALLOWED / NOT ALLOWED
PAP Counters Integrity VERIFIED / NOT VERIFIED / Corrupted
PAP Counters State COUNTER IN RANGE / BLOCKED
PAP Selection and Activation
Parameters
VERIFIED / NOT VERIFIED / CORRUPTED
Issuing Bank Transaction Data
Integrity and Origin
VERIFIED / NOT VERIFIED / CORRUPTED
Issuing Bank Transaction Data
Confidentiality, Integrity and
Origin
VERIFIED / NOT VERIFIED / CORRUPTED
PAP Action Analysis State Results of the PAP Action Analysis
PAP Risk Management
Parameters Integrity
VERIFIED / NOT VERIFIED / CORRUPTED
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 80 / 133
No disclosure to a third party without prior written consent of Gemalto
6.1.1 ACCESS CONTROL POLICY
FDP_ACC.2/ PAP Application Complete access control
FDP_ACC.2.1/ PAP Application The TSF shall enforce the PAP Application Access Control SFP
on S.PAP, PAP State Machine and all operations among subjects and objects covered by the
SFP.
FDP_ACC.2.2/ PAP Application The TSF shall ensure that all operations between any subject
controlled by the TSF and any object controlled by the TSF are covered by an access control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Selection
PAP Activation/Deactivation
PAP Locking/Unlocking
Systematic Personal Code Activation
Personal Code Presentation for Payment
Personal Code Verification
Log Update
Log Reading
Reference Personal Code Change/Unblock
Counter Reset
Audit
PAP Offline Data Authentication
PAP Action Analysis
PAP Offline Transaction
PAP Online Transaction
Issuing Bank Script Processing
FDP_ACC.2/ PAP Activation Complete access control
FDP_ACC.2.1/ PAP Activation The TSF shall enforce the PAP Activation Access Control SFP on
S.PAP;
PAP Transaction Parameters;
PAP Selection and Activation Parameters
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/ PAP Activation The TSF shall ensure that all operations between any subject
controlled by the TSF and any object controlled by the TSF are covered by an access control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Selection
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 81 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ACC.2/ PAP Administration Management Complete access control
FDP_ACC.2.1/ PAP Administration Management The TSF shall enforce the PAP Administration
Management Access Control SFP on
Subject:
S.PAP;
Objects:
PAP Selection and Activation Parameters;
PAP Log File;
PAP Keys;
PAP Counters;
Personal Code and Reference Personal Code
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/ PAP Administration Management The TSF shall ensure that all operations between
any subject controlled by the TSF and any object controlled by the TSF are covered by an access
control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Activation/Deactivation
PAP Locking/Unlocking
Systematic Personal Code Activation
Log Reading
Reference Personal Code Change/Unblock
FDP_ACC.2/ PAP Payment Transaction Management Complete access control
FDP_ACC.2.1/ PAP Payment Transaction Management The TSF shall enforce the PAP Payment
Transaction Management Access Control SFP on
Subjects:
S.PAP;
S.BANK_TSM;
S.MNO_ISD;
Objects:
Personal Code;
PAP Log File,
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/ PAP Payment Transaction Management The TSF shall ensure that all operations
between any subject controlled by the TSF and any object controlled by the TSF are covered by an
access control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
Personal Code Presentation for Payment
Personal Code Verification
Log Update
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 82 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ACC.2/ Post-Issuance Bank Management Complete access control
FDP_ACC.2.1/ Post-Issuance Bank Management The TSF shall enforce the Post-Issuance Bank
Management Access Control SFP on
Subjects:
S.PAP;
S.BANK_TSM;
S.MNO_ISD;
Objects:
Issuing Bank Transaction Data;
Issuing Bank Scripts;
PAP Counters;
PAP Keys;
PAP Selection and Activation Parameters;
PAP Transaction Parameters;
PAP Log File
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/ Post-Issuance Bank Management The TSF shall ensure that all operations between
any subject controlled by the TSF and any object controlled by the TSF are covered by an access
control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
Counter Reset
Audit
Issuing Bank Script Processing
FDP_ACC.2/ PAP Offline Authentication Complete access control
FDP_ACC.2.1/ PAP Offline Authentication The TSF shall enforce the PAP Offline Authentication
control access SFP on
Subject:
S.PAP;
Objects:
PAP Keys;
PAP Transaction Parameters;
PAP State Machine
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/ PAP Offline Authentication The TSF shall ensure that all operations between any
subject controlled by the TSF and any object controlled by the TSF are covered by an access
control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Offline Data Authentication
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 83 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ACC.2/ PAP Transaction Complete access control
FDP_ACC.2.1/ PAP Transaction The TSF shall enforce the PAP Transaction Access Control SFP
on
Subject:
S.PAP;
Objects;
Customer Account Information;
PAP Counters;
PAP Keys;
PAP State Machine;
PAP Transaction Parameters
and all operations among subjects and objects covered by the SFP.
FDP_ACC.2.2/ PAP Transaction The TSF shall ensure that all operations between any subject
controlled by the TSF and any object controlled by the TSF are covered by an access control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Offline Data Authentication
PAP Action Analysis
PAP Offline Transaction
PAP Online Transaction
PAP Transaction processing is defined by above operations.
6.1.2 ACCESS CONTROL FUNCTIONS
FDP_ACF.1/ PAP Application Security attribute based access control
FDP_ACF.1.1/ PAP Application The TSF shall enforce the PAP Application Access Control SFP
to objects based on the following:
Security attributes of the object PAP State Machine:
Contactless Life Cycle State;
(U)SIM Card Life Cycle Status.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 84 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ACF.1.2/ PAP Application The TSF shall enforce the following rules to determine if an
operation among controlled subjects and controlled objects is allowed:
PAP operations are allowed only if the:
Contactless Life Cycle State is ACTIVATED or DEACTIVATED;
(U)SIM Card Life Cycle Status is NOT BLOCKED.
FDP_ACF.1.3/ PAP Application The TSF shall explicitly authorise access of subjects to objects
based on the following additional rules: none.
FDP_ACF.1.4/ PAP Application The TSF shall explicitly deny access of subjects to objects based on
the following additional rules:
If one of the conditions listed in FDP_ACF.1.2 is not fulfilled.
FDP_ACF.1/ PAP Activation Security attribute based access control
FDP_ACF.1.1/ PAP Activation The TSF shall enforce the PAP Activation Access Control SFP to
objects based on the following:
Security attributes of the subject S.PAP:
Contactless Life Cycle State;
Security attributes of the object PAP Selection and Activation Parameters:
PAP Selection and Activation Parameters;
Security attributes of the object PAP Transaction Parameters:
PAP Transaction Parameters Integrity.
FDP_ACF.1.2/ PAP Activation The TSF shall enforce the following rules to determine if an operation
among controlled subjects and controlled objects is allowed:
Selection is allowed only if:
Contactless Life Cycle State is INSTALLED;
PAP Selection and Activation Parameters is allowed only if:
PAP Selection and Activation Parameters is VERIFIED;
PAP Transaction Parameters is allowed only if:
PAP Transaction Parameters Integrity is VERIFIED.
FDP_ACF.1.3/ PAP Activation The TSF shall explicitly authorise access of subjects to objects based
on the following additional rules:
None.
FDP_ACF.1.4/ PAP Activation The TSF shall explicitly deny access of subjects to objects based on
the following additional rules: following rule:
If one of the conditions listed in FDP_ACF.1.2 and FDP_ACF.1.3 is not fulfilled.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 85 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ACF.1/ PAP Administration Management Security attribute based access control
FDP_ACF.1.1/ PAP Administration Management The TSF shall enforce the PAP Administration
Management Access Control SFP to objects based on the following:
Security attributes of the object Personal Code and Reference Personal Code:
PAP Reference Personal Code State;
PAP Reference Personal Code Integrity;
PAP Personal Code State;
Security attributes of the subject S.PAP:
Contactless Life Cycle State;
Security attributes of the object PAP Log File:
Log File Reading Status;
Security attributes of the object PAP Keys:
PAP Keys Integrity;
Security attributes of the object PAP Counters:
PAP Counters Integrity;
PAP Counters State.
FDP_ACF.1.2/ PAP Administration Management The TSF shall enforce the following rules to
determine if an operation among controlled subjects and controlled objects is allowed:
Systematic Personal Code Activation/Deactivation is allowed only if:
PAP Reference Personal Code Integrity is VERIFIED;
PAP Personal Code State is VERIFIED;
Reference Personal Code Change/Unblock is allowed only if:
PAP Reference Personal Code Integrity is VERIFIED;
PAP Personal Code State is VERIFIED;
PAP Reference Personal Code State is UNBLOCKED;
Log Reading is allowed only if:
Contactless Life Cycle State is ACTIVATED or DEACTIVATED;
Log File Reading Status is PERMITTED (Log entry data is present);
PAP Activation/Deactivation is allowed only if:
Contactless Life Cycle State is ACTIVATED or DEACTIVATED;
PAP Reference Personal Code State Integrity is VERIFIED;
PAP Personal Code State is VERIFIED;
PAP Locking/Unlocking is allowed only if:
PAP (Issuing Bank) Keys Integrity is VERIFIED;
PAP (Issuing Bank secure script) Counters Integrity is VERIFIED;
PAP (Issuing Bank secure script) Counters State is NOT BLOCKED.
FDP_ACF.1.3/ PAP Administration Management The TSF shall explicitly authorise access of
subjects to objects based on the following additional rules: none.
FDP_ACF.1.4/ PAP Administration Management The TSF shall explicitly deny access of subjects to
objects based on the following additional rules: following rule:
If one of the conditions listed in FDP_ACF.1.2 is not fulfilled.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 86 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ACF.1/ PAP Payment Transaction Management Security attribute based access control
FDP_ACF.1.1/ PAP Payment Transaction Management The TSF shall enforce the PAP Payment
Transaction Management Access Control SFP to objects based on the following:
Security attributes of the object Personal Code:
PAP Reference Personal Code State;
PAP Reference Personal Code Integrity;
PAP Personal Code State;
PAP Personal Code Entry Amount;
Systematic Personal Code State;
Security attributes of the object PAP Log File:
Log File Update Status.
FDP_ACF.1.2/ PAP Payment Transaction Management The TSF shall enforce the following rules to
determine if an operation among controlled subjects and controlled objects is allowed:
Personal Code Verification is allowed only if:
PAP Reference Personal Code State is UNBLOCKED;
PAP Reference Personal Code Integrity is VERIFIED;
Personal Code Presentation for Payment is requested only if:
PAP Personal Code State is NOT VERIFIED (by the Bank's GUI) or ALWAYS
REQUESTED or REQUESTED AT THE NEXT PAYMENT;
PAP Personal Code Entry Amount is GREATER THAN PERSONAL CODE ENTRY
LIMIT VALUE or the Systematic Personal Code State is ENABLED;
PAP Log File is allowed for all transactions besides those of Post-Issuance Bank
Management (only during payment transactions):
Log File Update Status is ALLOWED
FDP_ACF.1.3/ PAP Payment Transaction Management The TSF shall explicitly authorise access of
subjects to objects based on the following additional rules: none.
FDP_ACF.1.4/ PAP Payment Transaction Management The TSF shall explicitly deny access of
subjects to objects based on the following additional rules: following rule:
If one of the conditions listed in FDP_ACF.1.2 is not fulfilled.
FDP_ACF.1/ Post-Issuance Bank Management Security attribute based access control
FDP_ACF.1.1/ Post-Issuance Bank Management The TSF shall enforce the Post-Issuance Bank
Management Access Control SFP to objects based on the following:
Security attributes of the object PAP Keys:
PAP Keys Integrity;
Security attributes of the object PAP Counters:
PAP Counters Integrity;
PAP Counters State;
Security attributes of the object PAP Transaction Parameters:
PAP Transaction Parameters Integrity;
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 87 / 133
No disclosure to a third party without prior written consent of Gemalto
Security attributes of the object Issuing Bank Transaction Data:
Issuing Bank Transaction Data Integrity and Origin;
Issuing Bank Transaction Data Confidentiality, Integrity and Origin.
FDP_ACF.1.2/ Post-Issuance Bank Management The TSF shall enforce the following rules to
determine if an operation among controlled subjects and controlled objects is allowed:
Post-Issuance Bank Management operations are allowed only if:
PAP (Issuing Bank) Keys Integrity is VERIFIED;
PAP (Issuing Bank secure script) Counters Integrity is VERIFIED;
PAP (Issuing Bank secure script) Counters State is NOT BLOCKED;
Issuing Bank Transaction Data Integrity and Origin is VERIFIED;
Issuing Bank Transaction Data Confidentiality, Integrity and Origin is VERIFIED;
PAP Transaction Parameters Integrity is VERIFIED;
FDP_ACF.1.3/ Post-Issuance Bank Management The TSF shall explicitly authorise access of
subjects to objects based on the following additional rules: None.
FDP_ACF.1.4/ Post-Issuance Bank Management The TSF shall explicitly deny access of subjects to
objects based on the following additional rules: following rule:
If one of the conditions listed in FDP_ACF.1.2 is not fulfilled.
FDP_ACF.1/ PAP Offline Authentication Security attribute based access control
FDP_ACF.1.1/ PAP Offline Authentication The TSF shall enforce the PAP Offline Authentication
Access Control SFP to objects based on the following:
Security attributes of the subject S.PAP:
Contactless Life Cycle State;
(U)SIM Card Life Cycle Status;
Security attributes of the object PAP State Machine:
PAP Transaction Processing State;
Security attributes of the object PAP Keys:
PAP Keys Integrity;
Security attributes of the object PAP Transaction Parameters:
PAP Transaction Parameters State;
PAP Transaction Parameters Integrity.
FDP_ACF.1.2/ PAP Offline Authentication The TSF shall enforce the following rules to determine if
an operation among controlled subjects and controlled objects is allowed:
PAP Offline Data Authentication is allowed only if:
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 88 / 133
No disclosure to a third party without prior written consent of Gemalto
(U)SIM Card Life Cycle Status is SELECTED;
Contactless Life Cycle State is ACTIVATED;
PAP Transaction Processing State complies with Transaction Flow;
PAP Keys Integrity is VERIFIED;
PAP Transaction Parameters Integrity is VERIFIED;
PAP Transaction Parameters State indicates a dynamic authentication process.
FDP_ACF.1.3/ PAP Offline Authentication The TSF shall explicitly authorise access of subjects to
objects based on the following additional rules: None.
FDP_ACF.1.4/ PAP Offline Authentication The TSF shall explicitly deny access of subjects to
objects based on the following additional rules: following rule:
If one of the conditions listed in FDP_ACF.1.2 is not fulfilled.
FDP_ACF.1/ PAP Transaction Security attribute based access control
FDP_ACF.1.1/ PAP Transaction The TSF shall enforce the PAP Transaction Access Control SFP
to objects based on the following:
Security attributes of the object PAP State Machine:
PAP Transaction Processing State;
Security attributes of the subject S.PAP:
Contactless Life Cycle State;
Security attributes of the object PAP Counters:
PAP Counters Integrity;
Security attributes of the object PAP Keys:
PAP Keys Integrity;
Security attributes of the object Customer Account Information:
PAP Customer Account Information Integrity (PAN integrity);
Security attributes of the object PAP Transaction Parameters:
PAP Transaction Parameters Integrity.
FDP_ACF.1.2/ PAP Transaction The TSF shall enforce the following rules to determine if an
operation among controlled subjects and controlled objects is allowed:
PAP Transaction processing is allowed only if:
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 89 / 133
No disclosure to a third party without prior written consent of Gemalto
(U)SIM Card Life Cycle Status is SELECTED;
Contactless Life Cycle State ACTIVATED;
PAP Transaction Processing State complies with Transaction Flows;
PAP Counters Integrity is VERIFIED;
PAP Counters State is not BLOCKED;
PAP Customer Account Information Integrity is VERIFIED;
PAP Risk Management Parameters Integrity is VERIFIED;.
FDP_ACF.1.3/ PAP Transaction The TSF shall explicitly authorise access of subjects to objects
based on the following additional rules: None.
FDP_ACF.1.4/ PAP Transaction The TSF shall explicitly deny access of subjects to objects based on
the following additional rules: following rule:
If one of the conditions listed in FDP_ACF.1.2 is not fulfilled.
6.1.3 INFORMATION FLOW CONTROL POLICY
FDP_IFC.2/ PAP Offline Authentication Complete information flow control
FDP_IFC.2.1/ PAP Offline Authentication The TSF shall enforce the PAP Offline Authentication
information flow control SFP on
Subjects:
S.PAP;
Information:
PAP Transaction Parameters;
and all operations that cause that information to flow to and from subjects covered by the SFP.
FDP_IFC.2.2/ PAP Offline Authentication The TSF shall ensure that all operations that cause any
information in the TOE to flow to and from any subject in the TOE are covered by an information
flow control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Offline Data Authentication
FDP_IFC.2/ PAP Offline Transaction Complete information flow control
FDP_IFC.2.1/ PAP Offline Transaction The TSF shall enforce the PAP Offline Transaction
Information Flow Control SFP on
Subject:
S.PAP;
Information:
PAP Transaction Parameters;
and all operations that cause that information to flow to and from subjects covered by the SFP.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 90 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_IFC.2.2/ PAP Offline Transaction The TSF shall ensure that all operations that cause any
information in the TOE to flow to and from any subject in the TOE are covered by an information
flow control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Action Analysis
PAP Offline Transaction
FDP_IFC.2/ PAP Online Transaction Complete information flow control
FDP_IFC.2.1/ PAP Online Transaction The TSF shall enforce the PAP Online Transaction
information flow control SFP on
Subject:
S.PAP;
Information:
PAP Transaction Parameters;
Issuing Bank Transaction Data
and all operations that cause that information to flow to and from subjects covered by the SFP.
FDP_IFC.2.2/ PAP Online Transaction The TSF shall ensure that all operations that cause any
information in the TOE to flow to and from any subject in the TOE are covered by an information
flow control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
PAP Action Analysis
PAP Online Transaction
FDP_IFC.2/ Post-Issuance Bank Management Complete information flow control
FDP_IFC.2.1/ Post-Issuance Bank Management The TSF shall enforce the Post-Issuance Bank
Management information flow control SFP on
Subject:
S.PAP;
Information:
Issuing Bank Transaction Data;
and all operations that cause that information to flow to and from subjects covered by the SFP.
FDP_IFC.2.2/ Post-Issuance Bank Management The TSF shall ensure that all operations that cause
any information in the TOE to flow to and from any subject in the TOE are covered by an
information flow control SFP.
Application Note: What follows are all operations among subjects and objects covered by this SFP:
Counter Reset
Audit
Issuing Bank Script Processing
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 91 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_IFF.1/ PAP Offline Authentication Simple security attributes
FDP_IFF.1.1/ PAP Offline Authentication The TSF shall enforce the PAP Offline Authentication
information flow control SFP based on the following types of subject and information security
attributes:
Security Attributes of the subject S.PAP:
Contactless Life Cycle State;
Security Attributes of the information PAP Transaction Parameters:
PAP Transaction Parameters State.
FDP_IFF.1.2/ PAP Offline Authentication The TSF shall permit an information flow between a
controlled subject and controlled information via a controlled operation if the following rules hold:
S.PAP is the currently selected application;
Contactless Life Cycle State is ACTIVATED;
PAP Transaction Parameters State requires dynamic authentication.
FDP_IFF.1.3/ PAP Offline Authentication The TSF shall enforce the following rules: none.
FDP_IFF.1.4/ PAP Offline Authentication The TSF shall explicitly authorise an information flow
based on the following rules: None.
FDP_IFF.1.5/ PAP Offline Authentication The TSF shall explicitly deny an information flow based on
the following rules:
If one of the conditions listed in FDP_IFF.1.2 is not fulfilled.
FDP_IFF.1/ PAP Offline Transaction Simple security attributes
FDP_IFF.1.1/ PAP Offline Transaction The TSF shall enforce the PAP Offline Transaction
information flow control SFP based on the following types of subject and information security
attributes:
Security Attributes of the subject S.PAP:
Contactless Life Cycle State;
PAP Action Analysis State;
Security Attributes of the information PAP Transaction Parameters:
PAP Transaction Processing State.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 92 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_IFF.1.2/ PAP Offline Transaction The TSF shall permit an information flow between a
controlled subject and controlled information via a controlled operation if the following rules hold:
S.PAP is the currently selected application;
Contactless Life Cycle State is ACTIVATED;
PAP Transaction Processing State complies with [PM-1] & [PM-2];
PAP Action Analysis State requires offline processing;
PAP Action Analysis State does not reject the transaction.
FDP_IFF.1.3/ PAP Offline Transaction The TSF shall enforce the following rules: None.
FDP_IFF.1.4/ PAP Offline Transaction The TSF shall explicitly authorise an information flow based
on the following rules: none.
FDP_IFF.1.5/ PAP Offline Transaction The TSF shall explicitly deny an information flow based on
the following rules:
If one of the conditions listed in FDP_IFF.1.2 is not fulfilled.
FDP_IFF.1/ PAP Online Transaction Simple security attributes
FDP_IFF.1.1/ PAP Online Transaction The TSF shall enforce the PAP Online Transaction
information flow control SFP based on the following types of subject and information security
attributes:
Security Attributes of the subject S.PAP:
Contactless Life Cycle State;
PAP Action Analysis State;
Security Attributes of the information PAP Transaction parameters:
PAP Transaction Processing State;
Security Attributes of the information Issuing Bank Transaction data:
Issuing Bank Transaction Data Integrity and Origin;
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 93 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_IFF.1.2/ PAP Online Transaction The TSF shall permit an information flow between a
controlled subject and controlled information via a controlled operation if the following rules hold:
S.PAP is the currently selected application;
Contactless Life Cycle is ACTIVATED;
PAP Transaction Processing State complies with [PM-1] & [PM-2];
PAP Action Analysis State requires online processing;
PAP Action Analysis State does not reject the transaction;
Issuing Bank Transaction Data Integrity and Origin is VERIFIED;
FDP_IFF.1.3/ PAP Online Transaction The TSF shall enforce the following rules: None.
FDP_IFF.1.4/ PAP Online Transaction The TSF shall explicitly authorise an information flow based
on the following rules: None.
FDP_IFF.1.5/ PAP Online Transaction The TSF shall explicitly deny an information flow based on
the following rules:
If one of the conditions listed in FDP_IFF.1.2 is not fulfilled.
FDP_IFF.1/ Post-Issuance Bank Management Simple security attributes
FDP_IFF.1.1/ Post-Issuance Bank Management The TSF shall enforce the Post-Issuance Bank
Management information flow control SFP based on the following types of subject and
information security attributes:
Security Attributes of the subject S.PAP:
Contactless Life Cycle State;
Security Attributes of the information Issuing Bank Transaction Data:
Issuing Bank Transaction Data Confidentiality, Integrity and Origin.
FDP_IFF.1.2/ Post-Issuance Bank Management The TSF shall permit an information flow between a
controlled subject and controlled information via a controlled operation if the following rules hold:
S.PAP is the currently selected application;
Contactless Life Cycle is ACTIVATED or DEACTIVATED;
PAP Action Analysis State does not reject the transaction;
Issuing Bank Transaction Data Confidentiality, Integrity and Origin is VERIFIED.
FDP_IFF.1.3/ Post-Issuance Bank Management The TSF shall enforce the following rules: None.
FDP_IFF.1.4/ Post-Issuance Bank Management The TSF shall explicitly authorise an information
flow based on the following rules: None.
FDP_IFF.1.5/ Post-Issuance Bank Management The TSF shall explicitly deny an information flow
based on the following rules:
If one of the conditions listed in FDP_IFF.1.2 is not fulfilled.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 94 / 133
No disclosure to a third party without prior written consent of Gemalto
6.1.4 SECURITY AUDIT
FAU_ARP.1 Security alarms
FAU_ARP.1.1 The TSF shall take one of the following actions:
locking the PAP;
blocking or terminating the (U)SIM card session (muting the (U)SIM card);
reinitializing secret data;
bringing the (U)SIM card to a secure state;
temporary disabling the services of the PAP until a privileged role performs a special
action;
definitely disabling all the services of the PAP
upon detection of a potential security violation.
FAU_SAA.1 Potential violation analysis
FAU_SAA.1.1 The TSF shall be able to apply a set of rules in monitoring the audited events and
based upon these rules indicate a potential violation of the enforcement of the SFRs.
FAU_SAA.1.2 The TSF shall enforce the following rules for monitoring audited events:
a) Accumulation or combination of the following auditable events:
unauthorised use of the PAP services;
unauthorised read or modification of the PAP sensitive assets protected in integrity
and confidentiality;
unauthorised modification of the PAP sensitive assets protected in integrity;
PAP Selection failure;
PAP Activation failure;
PAP Services failure
known to indicate a potential security violation;
b) No other rules.
FAU_GEN.1 Audit data generation
FAU_GEN.1.1 The TSF shall be able to generate an audit record of the following auditable events:
a) Start-up and shutdown of the audit functions;
b) All auditable events for the not specified level of audit; and
c) The following auditable events:
Payment transactions;
Application Note: c) the Payment transactions auditable events are given in FAU_SAA.1.2.
FAU_GEN.1.2 The TSF shall record within each audit record at least the following information:
a) Date and time of the event, type of event, subject identity (if applicable), and the outcome
(success or failure) of the event; and
b) For each audit event type, based on the auditable event definitions of the functional components
included in the PP/ST.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 95 / 133
No disclosure to a third party without prior written consent of Gemalto
Application Note: In the context of Payment transactions,
 Date/time is logged only for accepted/rejected transaction. For online transaction, date/time
will not record.
 The only type of event is payment transaction.
 The records are given in FAU_SAR.1/CUSTOMER and FAU_SAR.1/ISSUING_BANK
FAU_SAR.1/CUSTOMER Audit review
FAU_SAR.1.1/CUSTOMER The TSF shall provide U.CUSTOMER with the capability to read the
following audit information:
Purchase Amount;
Purchase Currency;
Transaction Date;
Cryptogram Information Data;
Application Transaction Counter;
Card Verification Results
from the audit records.
FAU_SAR.1.2/CUSTOMER The TSF shall provide the audit records in a manner suitable for the user
to interpret the information.
FAU_SAR.1/ISSUING_BANK Audit review
FAU_SAR.1.1/ISSUING_BANK The TSF shall provide U.ISSUING_BANK with the capability to read
all available information from the audit records.
FAU_SAR.1.2/ISSUING_BANK The TSF shall provide the audit records in a manner suitable for the
user to interpret the information.
6.1.5 CRYPTOGRAPHIC SUPPORT
FCS_CKM.1/Session Keys Cryptographic key generation
FCS_CKM.1.1/Session Keys The TSF shall generate cryptographic keys in accordance with a
specified cryptographic key generation algorithm PAP Session Keys Derivation and specified
cryptographic key sizes 16 bytes that meet the following: [PM-1] and [PM-2] standard.
FCS_CKM.4/Session Keys Cryptographic key destruction
FCS_CKM.4.1/Session Keys The TSF shall destroy cryptographic keys in accordance with a
specified cryptographic key destruction method (clearKey() method) that meet the following:
[JCAPI222].
Application Note:
 Same SFR than platform one.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 96 / 133
No disclosure to a third party without prior written consent of Gemalto
FCS_COP.1/Offline Data Authentication Cryptographic operation
FCS_COP.1.1/Offline Data Authentication The TSF shall perform Signature operation in
accordance with a specified cryptographic algorithm RSA and cryptographic key sizes 176 bytes
that meet the following: [PM-1] and [PM-2] specification.
FCS_COP.1/Application Cryptogram Cryptographic operation
FCS_COP.1.1/Application Cryptogram The TSF shall perform MAC CBC cryptogram generation
in accordance with a specified cryptographic algorithm 3DES and cryptographic key sizes 16 bytes
that meet the following: [PM-1] and [PM-2] specifications.
FCS_COP.1/Script Processing Cryptographic operation
FCS_COP.1.1/Script Processing The TSF shall perform Cryptogram generation in accordance with
a specified cryptographic algorithm 3DES and cryptographic key sizes 16 bytes that meet the
following: [PM-1] and [PM-2] specifications.
FCS_COP.1/Messages Data Integrity Cryptographic operation
FCS_COP.1.1/Messages Data Integrity The TSF shall perform MAC Computation in accordance
with a specified cryptographic algorithm 3DES and cryptographic key sizes 16 bytes that meet the
following: [PM-1] and [PM-2] specifications.
FCS_COP.1/Messages Data Confidentiality Cryptographic operation
FCS_COP.1.1/Messages Data Confidentiality The TSF shall perform Encipherment in accordance
with a specified cryptographic algorithm 3DES and cryptographic key sizes 16 bytes that meet the
following: [PM-1] and [PM-2] specifications.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 97 / 133
No disclosure to a third party without prior written consent of Gemalto
6.1.6 PROTECTION
FDP_SDI.2 Stored data integrity monitoring and action
FDP_SDI.2.1 The TSF shall monitor user data stored in containers controlled by the TSF for
corruption on all objects, based on the following attributes:
all stored Transaction management data;
all stored Temporary data during transaction processing integrity;
all stored Temporary data during Post-Issuance Bank Management.
FDP_SDI.2.2 Upon detection of a data integrity error, the TSF shall
deactivate and lock the PAP;
or Mute the (U)SIM card;
or Clear secret data;
FPT_TST.1 TSF testing
FPT_TST.1.1 The TSF shall run a suite of self tests at the conditions: before PAP application
usage to demonstrate the correct operation of: PAP application.
FPT_TST.1.2 The TSF shall provide authorised users with the capability to verify the integrity of:
Transaction Management Data (TSF persistent data).
FPT_TST.1.3 The TSF shall provide authorised users with the capability to verify the integrity of: PAP
application code.
Application Note:
 This is not TSF’s self-tests but points are covered by SFRs of the platform to verify the
integrity of persistent data and to verify the integrity of PAP application code during loading,
and then covered by the composition with the platform.
 This FPT_TST.1 is not useful to cover the security objectives of this document because
already covered by FDP SFRs, but writen here according to [PAP].
FPT_RPL.1 Replay detection
FPT_RPL.1.1 The TSF shall detect replay for the following entities: Issuer Scripts and VERIFY
commands .
FPT_RPL.1.2 The TSF shall perform reject the replay and increase counter when replay is
detected.
Application Note:
 if attack replay Issuer Scripts like PIN CHANGE UNBLOCK / APPLICATION UNBLOCK /
UPDATE RECORD etc, the replay will be rejected and SMI counter will be increased
 if attack replay VERIFY (PIN) Enciphered command which he sniffed from line, the
replay will be rejected and Bad Crypto Counter will be increased
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 98 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_RIP.1 Subset residual information protection
FDP_RIP.1.1 The TSF shall ensure that any previous information content of a resource is made
unavailable upon the deallocation of the resource from the following objects:
PAP Reference Personal Code;
PAP Personal Code;
PAP Keys.
Application Note:
 The PAP Reference Personal Code is created during personalization and cleared during reset
personalization
6.1.7 MANAGEMENT
FMT_SMF.1/ Functionalities Specification of Management Functions
FMT_SMF.1.1/ Functionalities The TSF shall be capable of performing the following management
functions:
Post-Issuance Bank Management (issuing-bank scripts);
Communication channels selection;
OTA Issuance Management (TSM can install the MPP instance over the air and
personalize the installed instance over the air too);
Customer personal parameter setup (Customer can setup some personal parameters
in MPP via MIDlet).
Application Note:
 The communication channels selection is to be considered as a way to identify the origin by
determining the contact or contactless protocol.
FMT_MOF.1/ Parameters Management of security functions behaviour
FMT_MOF.1.1/ Parameters The TSF shall restrict the ability to disable, enable and modify the
behaviour of the functions
PAP Selection;
PAP Activation/Deactivation;
PAP Offline Data Authentication;
PAP Offline Transaction;
PAP Online Transaction;
Personal Code Verification
to the Issuing Bank.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 99 / 133
No disclosure to a third party without prior written consent of Gemalto
FMT_MTD.1/ Secrets Management of TSF data
FMT_MTD.1.1/ Secrets The TSF shall restrict the ability to modify the PAP TSF data (all) to the
Issuing Bank.
FMT_MSA.1/ Issuing Bank Management of security attributes
FMT_MSA.1.1/ Issuing Bank The TSF shall enforce the Post-Issuance Bank Management Access
Control SFP and Post-Issuance Bank Management Information Control SFP to restrict the
ability to modify the security attributes all the PAP security attributes to the Issuing Bank.
FMT_MSA.2 Secure security attributes
FMT_MSA.2.1 The TSF shall ensure that only secure values are accepted for security attributes
defined in PAP Transaction Access Control SFP
and PAP Offline Transaction, PAP Online Transaction Information Control SFP.
FMT_MSA.3 Static attribute initialisation
FMT_MSA.3.1 The TSF shall enforce the following SFP to provide restrictive default values for
security attributes that are used to enforce the SFP.
SFPs are:
 Post-Issuance Bank Management Access Control SFP/ Information Control SFP
 PAP Application Access Control SFP
 PAP Activation Access Control SFP
 PAP Administration Management Access Control SFP
 PAP Payment Transaction Management Access Control SFP
 PAP Offline Authentication Access Control SFP/Information Control SFP
 PAP Transaction Access Control SFP
 PAP Offline Transaction Information Control SFP
 PAP Online Transaction Information Control SFP
FMT_MSA.3.2 The TSF shall allow the Issuing Bank and MNO to specify alternative initial values to
override the default values when an object or information is created.
FMT_SMR.1 Security roles
FMT_SMR.1.1 The TSF shall maintain the roles
Customer;
Issuing Bank;
MNO.
FMT_SMR.1.2 The TSF shall be able to associate users with roles.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 100 / 133
No disclosure to a third party without prior written consent of Gemalto
6.1.8 IDENTIFICATION / AUTHENTIFICATION
FIA_AFL.1/ Customer Authentication failure handling
FIA_AFL.1.1/ Customer The TSF shall detect when Personal Code Try Counter Limit unsuccessful
authentication attempts occur related to the Personal Code Verification.
FIA_AFL.1.2/ Customer When the defined number of unsuccessful authentication attempts has been
surpassed, the TSF shall
return an error, as specified in [PM-1] and [PM-2];
block the PAP Reference Personal Code until the Issuing Bank unblocks it.
Application Note:
 The Personal Code Try Counter Limit is created during personalization
FIA_AFL.1/ Issuing Bank Authentication failure handling
FIA_AFL.1.1/ Issuing Bank The TSF shall detect when an administrator configurable positive
integer within range of acceptable values unsuccessful authentication attempts occur related to
Issuing Bank Authentication.
FIA_AFL.1.2/ Issuing Bank When the defined number of unsuccessful authentication attempts has
been surpassed, the TSF shall
return an error as specified in [GP-4].
Application Note: The range of values is 1~FFFFh.
FIA_ATD.1 User attribute definition
FIA_ATD.1.1 The TSF shall maintain the following list of security attributes belonging to individual
users:
Personal Code Verification Security Attributes (PAP Transaction Parameters);
Issuing Bank Authentication Security Attributes (PAP Transaction Parameters).
FIA_UAU.1/ PAP Online Transaction Timing of authentication
FIA_UAU.1.1/ PAP Online Transaction The TSF shall allow
PAP Action analysis;
establishment of a trusted path dedicated to the current payment transaction
on behalf of the user to be performed before the user is authenticated.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 101 / 133
No disclosure to a third party without prior written consent of Gemalto
Refinement: “User authentication” stands for the authentication using the Personal Code of the
PAP.
FIA_UAU.1.2/ PAP Online Transaction The TSF shall require each user to be successfully
authenticated before allowing any other TSF-mediated actions on behalf of that user.
FIA_UAU.1/ Post-Issuance Bank Management Timing of authentication
FIA_UAU.1.1/ Post-Issuance Bank Management The TSF shall allow
selecting a PAP on the (U)SIM card;
requesting data that identifies the Issuing Bank;
establishment of a trusted path dedicated to the Post-Issuance Bank Management
on behalf of the user to be performed before the user is authenticated.
Refinement:”User authentication” stands for the authentication using the Personal Code.
FIA_UAU.1.2/ Post-Issuance Bank Management The TSF shall require each user to be successfully
authenticated before allowing any other TSF-mediated actions on behalf of that user.
FIA_UAU.1/ Payment Transaction Timing of authentication
FIA_UAU.1.1/ Payment Transaction The TSF shall allow all operations except payment
transactions on behalf of the user to be performed before the user is authenticated.
Refinement:”User authentication” stands for the authentication of the user to the (U)SIM card by
mean of the PAP PIN code.
FIA_UAU.1.2/ Payment Transaction The TSF shall require each user to be successfully
authenticated before allowing any other TSF-mediated actions on behalf of that user.
Application Note: This authentication shall be handled by the (U)SIM platform. The PAP shall be able
to verify the state of the customer authentication by the (U)SIM platform.
FIA_UAU.3 Unforgeable authentication
FIA_UAU.3.1 The TSF shall detect use of authentication data that has been forged by any user of the
TSF.
FIA_UAU.3.2 The TSF shall detect use of authentication data that has been copied from any other
user of the TSF.
FIA_UAU.4 Single-use authentication mechanisms
FIA_UAU.4.1 The TSF shall prevent reuse of authentication data related to
PAP Offline Data Authentication;
PAP Issuing Bank and MNO Authentication.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 102 / 133
No disclosure to a third party without prior written consent of Gemalto
FIA_UAU.6/ Customer Re-authenticating
FIA_UAU.6.1/ Customer The TSF shall re-authenticate the user under the conditions:
 Pre-enter PIN not allowed by issuer (depends on issuer configuration)
 Transaction Context conflict
 After completion of one payment transaction (depends on issuer configuration and card holder
option)
 After card reset
 Upon reception of SET-RESET-PARAMETERS with P1P2=Reset CVM
FIA_UID.1/ PAP Online Transaction Timing of identification
FIA_UID.1.1/ PAP Online Transaction The TSF shall allow all TSF-mediated actions listed in
FIA_UAU.1/PAP Online Transaction on behalf of the user to be performed before the user is
identified.
FIA_UID.1.2/ PAP Online Transaction The TSF shall require each user to be successfully identified
before allowing any other TSF-mediated actions on behalf of that user.
FIA_UID.1/ Post-Issuance Bank Management Timing of identification
FIA_UID.1.1/ Post-Issuance Bank Management The TSF shall allow all TSF-mediated actions
listed in FIA_UAU.1/ Post-Issuance Bank Management on behalf of the user to be performed
before the user is identified.
FIA_UID.1.2/ Post-Issuance Bank Management The TSF shall require each user to be successfully
identified before allowing any other TSF-mediated actions on behalf of that user.
FIA_UID.1/ Payment Transaction Timing of identification
FIA_UID.1.1/ Payment Transaction The TSF shall allow all TSF-mediated actions listed in
FIA_UAU.1/ Payment Transaction on behalf of the user to be performed before the user is
identified.
FIA_UID.1.2/ Payment Transaction The TSF shall require each user to be successfully identified
before allowing any other TSF-mediated actions on behalf of that user.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 103 / 133
No disclosure to a third party without prior written consent of Gemalto
FIA_USB.1 User-subject binding
FIA_USB.1.1 The TSF shall associate the following user security attributes with subjects acting on the
behalf of that user:
PAP Transaction Parameters State.
FIA_USB.1.2 The TSF shall enforce the following rules on the initial association of user security
attributes with subjects acting on the behalf of users:
PAP Transaction Parameters State initially indicates no identification/authentication of
the user.
FIA_USB.1.3 The TSF shall enforce the following rules governing changes to the user security
attributes associated with subjects acting on the behalf of users: none.
FIA_SOS.2 TSF Generation of secrets
FIA_SOS.2.1 The TSF shall provide a mechanism to generate secrets that meet the STANDARD
level as specified in platform (refer to [DCSSI2741]).
FIA_SOS.2.2 The TSF shall be able to enforce the use of TSF generated secrets for the generation
of the 8-bytes challenge used for cryptographic operations.
Refinement: "secrets" stand for random values.
Application Note: The 8-bytes challenge is generated from Applicative Get Challenge from Platform
Javacard API javacard.security.RandomData.generateData.
FDP_DAU.1 Basic Data Authentication
FDP_DAU.1.1 The TSF shall provide a capability to generate evidence that can be used as a
guarantee of the validity of the following objects and information:
Contactless Life Cycle;
(U)SIM Life Cycle Status;
PAP Code;
PAP Selection and Activation Parameters;
PAP Transaction Parameters;
PAP Keys;
Reference Personal Code;
PAP Log File;
PAP Counters;
PAP Customer Account Information.
FDP_DAU.1.2 The TSF shall provide S.PAP with the ability to verify evidence of the validity of the
indicated information.
Application Note: This FDP_DAU.1 is not appropriate but writen here according to [PAP]. This SFR has
to be used as integrity control.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 104 / 133
No disclosure to a third party without prior written consent of Gemalto
6.1.9 ACCESS and INFORMATION FLOW CONTROL SFP
FDP_ITC.2/ Post-Issuance Bank Management Import of user data with security attributes
FDP_ITC.2.1/ Post-Issuance Bank Management The TSF shall enforce the Post-Issuance Bank
Management Access Control and the Post-Issuance Bank Management Information Flow
Control SFPs when importing user data, controlled under the SFP, from outside of the TOE.
FDP_ITC.2.2/ Post-Issuance Bank Management The TSF shall use the security attributes
associated with the imported user data.
FDP_ITC.2.3/ Post-Issuance Bank Management The TSF shall ensure that the protocol used
provides for the unambiguous association between the security attributes and the user data
received.
FDP_ITC.2.4/ Post-Issuance Bank Management The TSF shall ensure that interpretation of the
security attributes of the imported user data is as intended by the source of the user data.
FDP_ITC.2.5/ Post-Issuance Bank Management The TSF shall enforce the following rules when
importing user data controlled under the SFP from outside the TOE:
the Issuing Bank Transaction Parameters are verified in origin and integrity (and
confidentiality if required) following [PM-1] and [PM-2] specifications.
FDP_ITC.2/ PAP Transaction Import of user data with security attributes
FDP_ITC.2.1/ PAP Transaction The TSF shall enforce the PAP Transaction Access Control and
the PAP Online Transaction Information Flow Control SFPs when importing user data,
controlled under the SFP, from outside of the TOE.
FDP_ITC.2.2/ PAP Transaction The TSF shall use the security attributes associated with the
imported user data.
FDP_ITC.2.3/ PAP Transaction The TSF shall ensure that the protocol used provides for the
unambiguous association between the security attributes and the user data received.
FDP_ITC.2.4/ PAP Transaction The TSF shall ensure that interpretation of the security attributes of
the imported user data is as intended by the source of the user data.
FDP_ITC.2.5/ PAP Transaction The TSF shall enforce the following rules when importing user data
controlled under the SFP from outside the TOE:
the Issuing Bank Transaction Data are verified in origin and integrity (and
confidentiality if required) following [PM-1] and [PM-2] specifications.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 105 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ETC.1 Export of user data without security attributes
FDP_ETC.1.1 The TSF shall enforce the TOE's Access Control and Information Flow Control
SFPs (all) when exporting user data, controlled under the SFP(s), outside of the TOE.
FDP_ETC.1.2 The TSF shall export the user data without the user data's associated security attributes
FDP_ITC.1 Import of user data without security attributes
FDP_ITC.1.1 The TSF shall enforce the Access Control and Information Flow Control SFPs (all
except those enforced in FDP_ITC.2/ Post-Issuance Bank Management and FDP_ITC.2/ PAP
Transaction) when importing user data, controlled under the SFP, from outside of the TOE.
FDP_ITC.1.2 The TSF shall ignore any security attributes associated with the user data when
imported from outside the TOE.
FDP_ITC.1.3 The TSF shall enforce the following rules when importing user data controlled under the
SFP from outside the TOE: None.
FDP_UIT.1 Data exchange integrity
FDP_UIT.1.1 The TSF shall enforce the PAP Offline Transaction, PAP Online Transaction and the
Post-Issuance Bank Management Information Flow Control SFPs to receive user data in a
manner protected from replay, insertion, deletion and modification errors.
FDP_UIT.1.2 The TSF shall be able to determine on receipt of user data, whether modification,
deletion, insertion and replay has occurred.
6.1.10 SECURE CHANNEL
FPT_TDC.1 Inter-TSF basic TSF data consistency
FPT_TDC.1.1 The TSF shall provide the capability to consistently interpret the following TSF data
types when shared between the TSF and another trusted IT product.
The TSF data types are:
 PAP Reference Personal Code State
 PAP Counters Integrity and PAP Counters State
 Contactless Life Cycle State
 PAP Transaction processing State and Issuing Bank Transaction Data Confidentiality (if
required), Integrity and Origin
FPT_TDC.1.2 The TSF shall use the rules defined in [PM-1]&[PM-2] when interpreting the TSF data
from another trusted IT product.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 106 / 133
No disclosure to a third party without prior written consent of Gemalto
FTP_ITC.1 Inter-TSF trusted channel
FTP_ITC.1.1 The TSF shall provide a communication channel between itself and another trusted IT
product that is logically distinct from other communication channels and provides assured
identification of its end points and protection of the channel data from modification or disclosure.
FTP_ITC.1.2 The TSF shall permit another trusted IT product to initiate communication via the
trusted channel.
FTP_ITC.1.3 The TSF shall initiate communication via the trusted channel for
PAP Online Transaction;
Post-Issuance Bank Management.
6.1.11 UNOBSERVABILITY
FPR_UNO.1 Unobservability
FPR_UNO.1.1 The TSF shall ensure that all users and subjects are unable to observe the operation
PIN comparison and key comparison on the Reference Personal Code and the PAP keys
performed by S.PAP.
6.2 Security Assurance Requirements
The Evaluation Assurance Level is EAL4 augmented with ALC_DVS.2 and AVA_VAN.5.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 107 / 133
No disclosure to a third party without prior written consent of Gemalto
6.3 Security Requirements Rationale
6.3.1 Objectives
6.3.1.1 Security Objectives for the TOE
TRANSACTION PROTECTION
O.TRANSACTION_UNIQUENESS This security objective is met by the following SFRs:
FCS_COP.1/Application Cryptogram,FCS_CKM.1/Session Keys, FCS_CKM.4/Session keys
which guarantees that transaction cryptograms are generated in accordance with the
[PM-1]&[PM-2] specifications.
All access and information flow control SFPs (FDP_ACC.2/ PAP Application, FDP_ACF.1/
PAP Application, FDP_IFC.2/ PAP Offline Authentication, FDP_IFF.1/ PAP Offline
Authentication, FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP Activation, FDP_ACF.1/
PAP Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
FDP_ACF.1/ PAP Offline Authentication, FDP_ACF.1/ Post-Issuance Bank Management,
FDP_ACF.1/ PAP Transaction, FDP_IFC.2/ PAP Offline Transaction, FDP_IFC.2/ PAP
Online Transaction, FDP_IFC.2/ Post-Issuance Bank Management, FDP_IFF.1/ PAP
Offline Transaction, FDP_IFF.1/ PAP Online Transaction, FDP_IFF.1/ Post-Issuance
Bank Management, FDP_ACC.2/ PAP Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/ Post-Issuance Bank Management,
FDP_ACC.2/ PAP Offline Authentication, FDP_ACC.2/ PAP Transaction, FDP_ETC.1
and FDP_ITC.1) are enforced for cryptogram generation and thus help in preserving the
uniqueness of a transaction.
FDP_UIT.1 which guarantees the integrity of data exchanged from and to the TOE by
detecting unauthorised modification and replayed transactions.
O.TRANSACTION_INTEGRITY This security objective is met by the following SFRs:
All access and information flow control SFPs (FDP_ACC.2/ PAP Application, FDP_ACF.1/
PAP Application, FDP_IFC.2/ PAP Offline Authentication, FDP_IFF.1/ PAP Offline
Authentication, FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP Activation, FDP_ACF.1/
PAP Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
FDP_ACF.1/ PAP Offline Authentication, FDP_ACF.1/ Post-Issuance Bank Management,
FDP_ACF.1/ PAP Transaction, FDP_IFC.2/ PAP Offline Transaction, FDP_IFC.2/ PAP
Online Transaction, FDP_IFC.2/ Post-Issuance Bank Management, FDP_IFF.1/ PAP
Offline Transaction, FDP_IFF.1/ PAP Online Transaction, FDP_IFF.1/ Post-Issuance
Bank Management, FDP_ACC.2/ PAP Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/ Post-Issuance Bank Management,
FDP_ACC.2/ PAP Offline Authentication, FDP_ACC.2/ PAP Transaction, FDP_ETC.1,
FDP_ITC.1, FDP_ITC.2/ PAP Transaction FDP_ITC.2/ Post-Issuance Bank
Management), FPT_TDC.1 and FDP_UIT.1 are enforced for transactions and thus help in
preserving the integrity of a transaction.
The SFRs FMT_MOF.1/ Parameters, FMT_MSA.1/ Issuing Bank and FMT_MSA.3 contributes
in covering this security objective by restricting the modification of parameters to the Issuing
Bank.
O.TRANSACTION_BYPASS This security objective is satisfied by the following SFRs:
All access and information flow control SFPs (FDP_ACC.2/ PAP Application, FDP_ACF.1/
PAP Application, FDP_IFC.2/ PAP Offline Authentication, FDP_IFF.1/ PAP Offline
Authentication, FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP Activation, FDP_ACF.1/
PAP Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
FDP_ACF.1/ PAP Offline Authentication, FDP_ACF.1/ PAP Offline Authentication,
FDP_ACF.1/ Post-Issuance Bank Management, FDP_ACF.1/ PAP Transaction,
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 108 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_IFC.2/ PAP Offline Transaction, FDP_IFC.2/ PAP Online Transaction, FDP_IFC.2/
Post-Issuance Bank Management, FDP_IFF.1/ PAP Offline Transaction, FDP_IFF.1/ PAP
Online Transaction, FDP_IFF.1/ Post-Issuance Bank Management, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP Payment Transaction Management,
FDP_ACC.2/ Post-Issuance Bank Management, FDP_ACC.2/ PAP Offline
Authentication, FDP_ACC.2/ PAP Transaction, FDP_ETC.1, FDP_ITC.1, FDP_ITC.2/
PAP Transaction and FDP_ITC.2/ Post-Issuance Bank Management) and FPT_TDC.1
are enforced for transaction process and thus help in ensuring a non-bypassability of the
transaction flow model.
FIA_UAU.1/ PAP Online Transaction, FIA_UAU.1/ Post-Issuance Bank Management,
FIA_UAU.1/ Payment Transaction, FIA_UID.1/ PAP Online Transaction, FIA_UID.1/
Payment Transaction, FIA_UID.1/ Post-Issuance Bank Management, FIA_AFL.1/
Customer, FIA_AFL.1/ Issuing Bank which enforce users identification and authentication
to perform some actions as defined in the [PM-1]&[PM-2] specifications.
The PAP Online Transaction in Payment mode does’nt need Issuing-Bank authentication: the
online approval is handled by POS terminal.
The PAP Online Transaction in Manamgent mode (Counter Reset, Issuer Script) needs
Issuing-Bank authentication.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 109 / 133
No disclosure to a third party without prior written consent of Gemalto
O.TRANSACTION_REPLAY This security objective is covered by the following SFRs:
FPT_RPL.1/ which ensures that all transactions are protected against replay; the TSF can
detect it and react to such attack.
FIA_SOS.2/ which ensures the TOE can generate random value to enforce the protection
against replay attacks.
FIA_UAU.4 guarantees that authentication data cannot be reused.
FCS_CKM.1/Session Keys and FCS_CKM.4/Session keys ensures that session keys
generation and destruction meet the requirements of [PM-1]&[PM-2]
FDP_UIT.1 which guarantees the integrity of data exchanged from and to the TOE by
detecting replayed transactions.
AUTHENTICATION
O.USER_AUTH This objective is covered by:
FIA_UAU.1/ PAP Online Transaction which require the authentication of the customer to the
TOE to perform a transaction,
FIA_UAU.3 which prevents against use of forged authentication data,
FIA_UAU.4 which prevents against reuse of authentication data,
FIA_UAU.6/ Customer that requests customer re-authentication when it is required
FIA_SOS.2 which ensures the TOE can generate random value to perform authentication
processes.
FIA_ATD.1 guarantees that security attributes belonging to customer are securely
maintained.
FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP Application, FDP_ACF.1/ PAP
Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
FDP_ACC.2/ PAP Administration Management, FDP_ACC.2/ PAP Payment Transaction
Management that define access controls for the Customer
FMT_SMR.1 that associates the roles to the Customer
FDP_RIP.1 and FIA_AFL.1/ Customer that provide protection against brute force attacks and
cryptographic extraction of residual information on the Personal Code.
FCS_COP.1/Messages Data Integrity, FCS_COP.1/Messages Data Confidentiality which
ensure cryptographic support for authentication mechanisms
FIA_USB.1 ensures that the appropriate security attributes are associated to the Customer
authentication
O.ISSUING_BANK_AUTH This objective is covered by:
FIA_UAU.1/ Post-Issuance Bank Management which require a successful authentication of
the Issuing Bank to the TOE to perform a transaction,
FIA_UAU.3 which prevents against use of forged authentication data,
FIA_UAU.4 which prevents against reuse of authentication data,
FIA_SOS.2 which ensures the TOE can generate random value to perform authentication
processes.
FIA_AFL.1/ Issuing Bank that detects unauthorised authentications events
FIA_ATD.1 guarantees that security attributes belonging to the Issuing Bank are securely
maintained.
FIA_USB.1 ensures that the appropriate security attributes are associated to the Issuing Bank
authentication
FDP_ACC.2/ Post-Issuance Bank Management, FDP_ACF.1/ Post-Issuance Bank
Management, FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP Application, FDP_ACF.1/
PAP Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 110 / 133
No disclosure to a third party without prior written consent of Gemalto
FDP_ACC.2/ PAP Administration Management, FDP_ACC.2/ PAP Activation,
FDP_ACC.2/ PAP Payment Transaction Management, FDP_ACF.1/ PAP Activation that
define access controls to the TOE for the Issuing Bank
FDP_ETC.1, FDP_ITC.1 and FDP_ITC.2/ Post-Issuance Bank Management and FPT_TDC.1
ensure that security attributes are not exported and those related to Post-Issuance Bank
Management are covered.
FMT_SMR.1 that associates the roles to the Issuing Bank
FCS_COP.1/Messages Data Integrity, FCS_COP.1/Messages Data Confidentiality,
FCS_COP.1/Script Processing which ensure cryptographic support for authentication
mechanisms
EXECUTION PROTECTION
O.AUTHORISATION_CONTROL This security objective is covered by the following SFRs:
Access and information flow control SFPs (FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP
Application, FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP Activation, FDP_ACF.1/
PAP Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
FDP_ACF.1/ PAP Transaction, FDP_IFC.2/ PAP Online Transaction, FDP_IFF.1/ PAP
Online Transaction, FDP_ACC.2/ PAP Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/ PAP Transaction and FDP_ITC.1) are
enforced for authorisation requests and thus help in preserving the consistency of
payment transactions.
FIA_UAU.1/ PAP Online Transaction which enforces users successful authentication to
perform payment transactions as defined in the [PM-1]&[PM-2] specifications
DATA PROTECTION
O.DATA_DISCLOSURE This security objective is satisfied by the following SFRs:
FDP_RIP.1 that prevent residual information on the Personal Code and the PAP keys
All access and information flow control SFPs (FDP_ACC.2/ PAP Application, FDP_ACF.1/
PAP Application, FDP_IFC.2/ PAP Offline Authentication, FDP_IFF.1/ PAP Offline
Authentication, FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP Activation, FDP_ACF.1/
PAP Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
FDP_ACF.1/ PAP Offline Authentication, FDP_ACF.1/ PAP Offline Authentication,
FDP_ACF.1/ Post-Issuance Bank Management, FDP_ACF.1/ PAP Transaction,
FDP_IFC.2/ PAP Offline Transaction, FDP_IFC.2/ PAP Online Transaction, FDP_IFC.2/
Post-Issuance Bank Management, FDP_IFF.1/ PAP Offline Transaction, FDP_IFF.1/ PAP
Online Transaction, FDP_IFF.1/ Post-Issuance Bank Management, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP Payment Transaction Management,
FDP_ACC.2/ Post-Issuance Bank Management, FDP_ACC.2/ PAP Offline
Authentication, FDP_ACC.2/ PAP Transaction) helps in ensuring the confidentiality of the
User data
FDP_ETC.1, FDP_ITC.1, FDP_ITC.2/ Post-Issuance Bank Management, FDP_ITC.2/ PAP
Transaction and FPT_TDC.1 that cover the confidentiality of user data when imported
and exported.
FAU_ARP.1 that prevents and react from potential security violation
FAU_SAA.1 - FAU_SAA.1 which specifies rules that preserve the confidentiality of log files.
FCS_COP.1/Offline Data Authentication, FCS_COP.1/Script Processing and
FCS_COP.1/Messages Data Confidentiality that specify cryptographic algorithms that
shall be used to ensure the confidentiality of transmitted data. -FPR_UNO.1 which
specifies that PIN comparison and Key comparison are unobservable.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 111 / 133
No disclosure to a third party without prior written consent of Gemalto
O.DATA_INTEGRITY This security objective is satisfied by the following SFRs:
All access and information flow control SFPs (FDP_ACC.2/ PAP Application, FDP_ACF.1/
PAP Application, FDP_IFC.2/ PAP Offline Authentication, FDP_IFF.1/ PAP Offline
Authentication, FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP Activation, FDP_ACF.1/
PAP Administration Management, FDP_ACF.1/ PAP Payment Transaction Management,
FDP_ACF.1/ PAP Offline Authentication, FDP_ACF.1/ PAP Offline Authentication,
FDP_ACF.1/ Post-Issuance Bank Management, FDP_ACF.1/ PAP Transaction,
FDP_IFC.2/ PAP Offline Transaction, FDP_IFC.2/ PAP Online Transaction, FDP_IFC.2/
Post-Issuance Bank Management, FDP_IFF.1/ PAP Offline Transaction, FDP_IFF.1/ PAP
Online Transaction, FDP_IFF.1/ Post-Issuance Bank Management, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP Payment Transaction Management,
FDP_ACC.2/ Post-Issuance Bank Management, FDP_ACC.2/ PAP Offline
Authentication, FDP_ACC.2/ PAP Transaction) helps in ensuring the integrity of the User
data
FDP_ETC.1, FDP_ITC.1, FDP_ITC.2/ Post-Issuance Bank Management, FDP_ITC.2/ PAP
Transaction and FPT_TDC.1 that cover the integrity of user data when imported and
exported.
FAU_ARP.1 that prevents and react from potential security violation
FAU_SAA.1 which specifies rules that preserve the integrity of log files.
FCS_COP.1/Offline Data Authentication, FCS_COP.1/Script Processing,
FCS_COP.1/Application Cryptogram and FCS_COP.1/Messages Data Integrity that
specify cryptographic algorithms that shall be used to ensure the integrity of transmitted
data.
FDP_DAU.1 that guarantees the validity of objects and information
FDP_SDI.2 which ensure that data integrity is controlled by the TSF
FDP_UIT.1 which guarantees the integrity of data exchanged from and to the TOE by
detecting unauthorised modification of data.
FTP_ITC.1 that requires a communication channel that guarantees the integrity of transmitted
data
FMT_MSA.1/ Issuing Bank and FMT_MSA.3 that protect the security attributes
FMT_MOF.1/ Parameters and FMT_MTD.1/ Secrets that restrict the ability to modify TSF
data and security functions to the Issuing Bank and thus protect their integrity.
FPT_TST.1 covered by the Platform according to composition (refer to application note of the
SFR).
O.DATA_USERS This security objective is covered by the following SFR:
FMT_SMR.1 which ensures that users are associated with roles and these roles are
maintained by the TSF.
FIA_UAU.1/ PAP Online Transaction, FIA_UAU.1/ Payment Transaction, FIA_UAU.1/ Post-
Issuance Bank Management, as well as FIA_AFL.1.1/ Customer and FIA_AFL.1.1/
Issuing Bank which ensures the Customer and Issuing Bank authentication. Note that the
MNO authentication is ensured by the Platform according to composition.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 112 / 133
No disclosure to a third party without prior written consent of Gemalto
RISK MANAGEMENT
O.RISK_MNGT This security objective is met by the following SFRs:
FDP_ACC.2/ PAP Transaction and FDP_ACF.1/ PAP Transaction, FDP_IFC.2/ PAP Offline
Transaction and FDP_IFF.1/ PAP Offline Transaction, and FDP_IFC.2/ PAP Online
Transaction and FDP_IFF.1/ PAP Online Transaction, which ensure number of
transactions without authorization does not exceed maximum values of risk management
counters.
FDP_UIT.1 which ensures that data are protected during transmission from and to the TOE.
Unauthorised modification and replay attacks are detected.
FMT_MSA.2 which guarantees that only secure values are accepted for security attributes
O.APP_BLOCK This security objective is met by the following SFRs:
FDP_ACC.2/ PAP Administration Management and FDP_ACF.1/ PAP Administration
Management which grant an authorized user (the Issuing Bank) the privilege to block the
PAP and its data.
FIA_UID.1/ Post-Issuance Bank Management and FIA_UAU.1/ Post-Issuance Bank
Management that contribute to meet the objective in requiring Issuing Bank to be
identified and authenticated.
FIA_AFL.1/ Issuing Bank that details which special actions shall be undertaken and refining
who is an authorised subject (only Issuing Bank has the privilege to block the PAP and its
data).
O.SIM_UNLOCK This security objective is covered by FIA_UAU.1/ Payment Transaction and
FIA_UID.1/ Payment Transaction which require a successful identification and authentication of the
customer to the (U)SIM card to perform a payment transaction.
O.AUDIT This security objective is met by the following SFRs:
FAU_GEN.1 which guarantees that auditable events are recorded
FAU_SAR.1/CUSTOMER and FAU_SAR.1/ISSUING_BANK which ensure that authorised
users have the capability to read log files in a manner suitable for them to interpret the
information.
O.CHANNELS This security objective is met by the following SFRs:
FMT_SMF.1/ Functionalities which ensure that the communication channels can be selected
The Select determines the contact or contactless (origin) of communication channel,
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 113 / 133
No disclosure to a third party without prior written consent of Gemalto
O.AUDIT_ACCESS This security objective is met by the following SFRs:
FAU_SAR.1/CUSTOMER which ensure that authorised users have the capability to read log
files in a manner suitable for them to interpret the information.
6.3.2 Rationale tables of Security Objectives and SFRs
Security Objectives Security Functional Requirements Rationale
O.TRANSACTION_UNIQUENESS
FCS_CKM.1/Session Keys, FCS_CKM.4/Session
Keys, FDP_ACC.2/ PAP Application,
FDP_ACF.1/ PAP Application, FDP_ETC.1,
FDP_IFC.2/ PAP Offline Authentication,
FDP_IFF.1/ PAP Offline Authentication,
FDP_UIT.1, FDP_ACC.2/ PAP Activation,
FDP_ACF.1/ PAP Activation, FDP_ACF.1/ PAP
Administration Management, FDP_ACF.1/ PAP
Payment Transaction Management, FDP_ACF.1/
PAP Offline Authentication, FDP_ACF.1/ Post-
Issuance Bank Management, FDP_ACF.1/ PAP
Transaction, FDP_IFC.2/ PAP Offline
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFC.2/ Post-Issuance Bank
Management, FDP_IFF.1/ PAP Offline
Transaction, FDP_IFF.1/ PAP Online
Transaction, FDP_IFF.1/ Post-Issuance Bank
Management, FDP_ITC.1, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/
Post-Issuance Bank Management, FDP_ACC.2/
PAP Offline Authentication, FDP_ACC.2/ PAP
Transaction, FCS_COP.1/Application Cryptogram
Section
6.3.1
O.TRANSACTION_INTEGRITY
FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP
Application, FDP_ETC.1, FDP_IFC.2/ PAP Offline
Authentication, FDP_ITC.2/ Post-Issuance Bank
Management, FDP_ACC.2/ PAP Activation,
FDP_ACF.1/ PAP Activation, FDP_ACF.1/ PAP
Administration Management, FDP_ACF.1/ PAP
Payment Transaction Management, FDP_ACF.1/
PAP Offline Authentication, FDP_ACF.1/ Post-
Issuance Bank Management, FDP_ACF.1/ PAP
Transaction, FDP_IFC.2/ PAP Offline
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFC.2/ Post-Issuance Bank
Management, FDP_ITC.1, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/
Post-Issuance Bank Management, FDP_ACC.2/
PAP Offline Authentication, FDP_ACC.2/ PAP
Transaction, FDP_IFF.1/ PAP Offline
Authentication, FDP_IFF.1/ PAP Offline
Transaction, FDP_IFF.1/ PAP Online
Transaction, FDP_IFF.1/ Post-Issuance Bank
Management, FDP_ITC.2/ PAP Transaction,
FMT_MOF.1/ Parameters, FMT_MSA.1/ Issuing
Bank, FMT_MSA.3, FDP_UIT.1, FPT_TDC.1
Section
6.3.1
O.TRANSACTION_BYPASS
FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP
Application, FDP_ETC.1, FDP_IFC.2/ PAP Offline
Section
6.3.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 114 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Security Functional Requirements Rationale
Authentication, FDP_IFF.1/ PAP Offline
Authentication, FDP_ITC.2/ Post-Issuance Bank
Management, FIA_UAU.1/ PAP Online
Transaction, FDP_ACC.2/ PAP Activation,
FDP_ACF.1/ PAP Activation, FDP_ACF.1/ PAP
Administration Management, FDP_ACF.1/ PAP
Payment Transaction Management, FDP_ACF.1/
PAP Offline Authentication, FDP_ACF.1/ Post-
Issuance Bank Management, FDP_ACF.1/ PAP
Transaction, FDP_IFC.2/ PAP Offline
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFC.2/ Post-Issuance Bank
Management, FDP_IFF.1/ PAP Offline
Transaction, FDP_IFF.1/ PAP Online
Transaction, FDP_IFF.1/ Post-Issuance Bank
Management, FIA_UAU.1/ Post-Issuance Bank
Management, FDP_ITC.1, FIA_UID.1/ PAP
Online Transaction, FIA_UID.1/ Post-Issuance
Bank Management, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/
Post-Issuance Bank Management, FDP_ACC.2/
PAP Transaction, FIA_AFL.1/ Customer,
FIA_AFL.1/ Issuing Bank, FDP_ACC.2/ PAP
Offline Authentication, FDP_ITC.2/ PAP
Transaction, FIA_UAU.1/ Payment Transaction,
FIA_UID.1/ Payment Transaction, FPT_TDC.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 115 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Security Functional Requirements Rationale
O.TRANSACTION_REPLAY
FPT_RPL.1, FIA_SOS.2, FIA_UAU.4,
FCS_CKM.1/Session Keys, FCS_CKM.4/Session
Keys, FDP_UIT.1
Section
6.3.1
O.USER_AUTH
FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP
Application, FDP_RIP.1, FIA_AFL.1/ Customer,
FIA_ATD.1, FIA_UAU.3, FIA_UAU.4,
FCS_COP.1/Messages Data Integrity,
FCS_COP.1/Messages Data Confidentiality,
FDP_ACF.1/ PAP Administration Management,
FDP_ACF.1/ PAP Payment Transaction
Management, FDP_ACC.2/ PAP Administration
Management, FDP_ACC.2/ PAP Payment
Transaction Management, FIA_UAU.1/ PAP
Online Transaction, FIA_UAU.6/ Customer,
FIA_SOS.2, FMT_SMR.1, FIA_USB.1
Section
6.3.1
O.ISSUING_BANK_AUTH
FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP
Application, FDP_ETC.1, FIA_ATD.1,
FIA_UAU.3, FIA_UAU.4, FCS_COP.1/Script
Processing, FCS_COP.1/Messages Data
Integrity, FCS_COP.1/Messages Data
Confidentiality, FDP_ACC.2/ PAP Activation,
FDP_ACF.1/ PAP Activation, FDP_ACF.1/ Post-
Issuance Bank Management, FIA_AFL.1/ Issuing
Bank, FDP_ITC.1, FMT_SMR.1, FDP_ITC.2/
Post-Issuance Bank Management, FDP_ACC.2/
PAP Administration Management, FDP_ACC.2/
PAP Payment Transaction Management,
FDP_ACC.2/ Post-Issuance Bank Management,
FDP_ACF.1/ PAP Administration Management,
FDP_ACF.1/ PAP Payment Transaction
Management, FIA_SOS.2, FIA_UAU.1/ Post-
Issuance Bank Management, FIA_USB.1,
FPT_TDC.1
Section
6.3.1
O.MNO_AUTH
handled by the (U)SIM platform (O.COMM-
AUTH)
O.AUTHORISATION_CONTROL
FDP_ACC.2/ PAP Application, FDP_ACF.1/ PAP
Application, FIA_UAU.1/ PAP Online Transaction,
FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP
Activation, FDP_ACF.1/ PAP Administration
Management, FDP_ACF.1/ PAP Payment
Transaction Management, FDP_ACF.1/ PAP
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFF.1/ PAP Online
Transaction, FDP_ITC.1, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/
PAP Transaction
Section
6.3.1
O.DATA_DISCLOSURE
FDP_IFF.1/ PAP Offline Authentication,
FDP_IFC.2/ PAP Offline Authentication,
FDP_RIP.1, FDP_ACC.2/ PAP Application,
FDP_ACF.1/ PAP Application, FDP_ITC.2/ Post-
Issuance Bank Management, FDP_ETC.1,
FAU_ARP.1, FAU_SAA.1,
FCS_COP.1/Messages Data Confidentiality,
Section
6.3.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 116 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Security Functional Requirements Rationale
FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP
Activation, FDP_ACF.1/ PAP Administration
Management, FDP_ACF.1/ PAP Payment
Transaction Management, FDP_ACF.1/ PAP
Offline Authentication, FDP_ACF.1/ Post-
Issuance Bank Management, FDP_ACF.1/ PAP
Transaction, FDP_IFC.2/ PAP Offline
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFC.2/ Post-Issuance Bank
Management, FDP_IFF.1/ PAP Offline
Transaction, FDP_IFF.1/ PAP Online
Transaction, FDP_IFF.1/ Post-Issuance Bank
Management, FDP_ITC.1, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/
Post-Issuance Bank Management, FDP_ACC.2/
PAP Offline Authentication, FDP_ACC.2/ PAP
Transaction, FDP_ITC.2/ PAP Transaction,
FCS_COP.1/Offline Data Authentication,
FCS_COP.1/Script Processing, FPR_UNO.1,
FPT_TDC.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 117 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Security Functional Requirements Rationale
O.DATA_INTEGRITY
FAU_ARP.1, FAU_SAA.1, FDP_ACC.2/ PAP
Application, FDP_ACF.1/ PAP Application,
FDP_DAU.1, FDP_ETC.1, FDP_IFC.2/ PAP
Offline Authentication, FDP_IFF.1/ PAP Offline
Authentication, FDP_ITC.2/ Post-Issuance Bank
Management, FDP_SDI.2, FDP_UIT.1,
FTP_ITC.1, FPT_TST.1, FMT_MTD.1/ Secrets,
FCS_COP.1/Offline Data Authentication,
FCS_COP.1/Application Cryptogram,
FCS_COP.1/Script Processing,
FCS_COP.1/Messages Data Integrity,
FDP_ACC.2/ PAP Activation, FDP_ACF.1/ PAP
Activation, FDP_ACF.1/ PAP Administration
Management, FDP_ACF.1/ PAP Payment
Transaction Management, FDP_ACF.1/ PAP
Offline Authentication, FDP_ACF.1/ Post-
Issuance Bank Management, FDP_ACF.1/ PAP
Transaction, FDP_IFC.2/ PAP Offline
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFC.2/ Post-Issuance Bank
Management, FDP_IFF.1/ PAP Offline
Transaction, FDP_IFF.1/ PAP Online
Transaction, FDP_IFF.1/ Post-Issuance Bank
Management, FDP_ITC.1, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/ PAP
Payment Transaction Management, FDP_ACC.2/
PAP Offline Authentication, FDP_ACC.2/ PAP
Transaction, FDP_ITC.2/ PAP Transaction,
FDP_ACC.2/ Post-Issuance Bank Management,
FMT_MOF.1/ Parameters, FMT_MSA.1/ Issuing
Bank, FMT_MSA.3, FPT_TDC.1
Section
6.3.1
O.DATA_USERS
FMT_SMR.1, FIA_UAU.1/ PAP Online
Transaction, FIA_UAU.1/ Payment Transaction,
FIA_UAU.1/ Post-Issuance Bank Management,
FIA_AFL.1/ Customer, FIA_AFL.1/ Issuing Bank
Section
6.3.1
O.RISK_MNGT
FDP_UIT.1, FMT_MSA.2, FDP_ACC.2/ PAP
Transaction, FDP_ACF.1/ PAP Transaction,
FDP_IFC.2/ PAP Offline Transaction,
FDP_IFF.1/ PAP Offline Transaction,
FDP_IFC.2/ PAP Online Transaction,
FDP_IFF.1/ PAP Online Transaction
Section
6.3.1
O.APP_BLOCK
FIA_AFL.1/ Issuing Bank, FDP_ACC.2/ PAP
Administration Management, FDP_ACF.1/ PAP
Administration Management,
FIA_UAU.1/ Post-Issuance Bank Management,
FIA_UID.1/ Post-Issuance Bank Management
Section
6.3.1
O.SIM_UNLOCK
FIA_UAU.1/ Payment Transaction, FIA_UID.1/
Payment Transaction
Section
6.3.1
O.AUDIT
FAU_GEN.1, FAU_SAR.1/CUSTOMER,
FAU_SAR.1/ISSUING_BANK
Section
6.3.1
O.CHANNELS FMT_SMF.1/ Functionalities
Section
6.3.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 118 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Objectives Security Functional Requirements Rationale
O.AUDIT_ACCESS FAU_SAR.1/CUSTOMER,
Section
6.3.1
O.GUIS_AUTH
handled by the (U)SIM platform (O.APPLI-AUTH
and O.COMM-AUTH)
Table 13: Security Objectives and SFRs - Coverage
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 119 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Functional
Requirements
Security Objectives
FDP_ACC.2/ PAP Application
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ACC.2/ PAP Activation
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ACC.2/ PAP
Administration Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.APP_BLOCK
FDP_ACC.2/ PAP Payment
Transaction Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ACC.2/ Post-Issuance
Bank Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_ACC.2/ PAP Offline
Authentication
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ACC.2/ PAP Transaction
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_ACF.1/ PAP Application
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ACF.1/ PAP Activation
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 120 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Functional
Requirements
Security Objectives
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 121 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Functional
Requirements
Security Objectives
FDP_ACF.1/ PAP
Administration Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.APP_BLOCK
FDP_ACF.1/ PAP Payment
Transaction Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ACF.1/ Post-Issuance
Bank Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_ACF.1/ PAP Offline
Authentication
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ACF.1/ PAP Transaction
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_IFC.2/ PAP Offline
Authentication
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_IFC.2/ PAP Offline
Transaction
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_IFC.2/ PAP Online
Transaction
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_IFC.2/ Post-Issuance
Bank Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_IFF.1/ PAP Offline
Authentication
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 122 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Functional
Requirements
Security Objectives
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 123 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Functional
Requirements
Security Objectives
FDP_IFF.1/ PAP Offline
Transaction
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_IFF.1/ PAP Online
Transaction
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FDP_IFF.1/ Post-Issuance
Bank Management
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY,
O.RISK_MNGT
FAU_ARP.1 O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FAU_SAA.1 O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FAU_GEN.1 O.AUDIT
FAU_SAR.1/CUSTOMER O.AUDIT, O.AUDIT_ACCESS
FAU_SAR.1/ISSUING_BANK O.AUDIT,
FCS_CKM.1/Session Keys
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_REPLAY
FCS_COP.1/Offline Data
Authentication
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FCS_COP.1/Application
Cryptogram
O.TRANSACTION_UNIQUENESS,
O.DATA_INTEGRITY
FCS_COP.1/Script Processing
O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FCS_COP.1/Messages Data
Integrity
O.USER_AUTH, O.ISSUING_BANK_AUTH,
O.DATA_INTEGRITY
FCS_COP.1/Messages Data
Confidentiality
O.USER_AUTH, O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE
FDP_SDI.2 O.DATA_INTEGRITY
FPT_TST.1 O.DATA_INTEGRITY
FPT_RPL.1 O.TRANSACTION_REPLAY
FDP_RIP.1 O.USER_AUTH, O.DATA_DISCLOSURE
FMT_SMF.1/ Functionalities O.CHANNELS
FMT_MOF.1/ Parameters
O.TRANSACTION_INTEGRITY,
O.DATA_INTEGRITY
FMT_MTD.1/ Secrets O.DATA_INTEGRITY
FMT_MSA.1/ Issuing Bank
O.TRANSACTION_INTEGRITY,
O.DATA_INTEGRITY
FMT_MSA.2 O.RISK_MNGT
FMT_MSA.3
O.TRANSACTION_INTEGRITY,
O.DATA_INTEGRITY
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 124 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Functional
Requirements
Security Objectives
FMT_SMR.1
O.USER_AUTH, O.ISSUING_BANK_AUTH,
O.DATA_USERS
FIA_AFL.1/ Customer
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.APP_BLOCK, O.DATA_USERS
FIA_AFL.1/ Issuing Bank
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH, O.APP_BLOCK,
O.DATA_USERS
FIA_ATD.1 O.USER_AUTH, O.ISSUING_BANK_AUTH
FIA_UAU.1/ PAP Online
Transaction
O.TRANSACTION_BYPASS, O.USER_AUTH,
O.AUTHORISATION_CONTROL
FIA_UAU.1/ Post-Issuance
Bank Management
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH
FIA_UAU.1/ Payment
Transaction
O.SIM_UNLOCK
FIA_UAU.3 O.USER_AUTH, O.ISSUING_BANK_AUTH
FIA_UAU.4
O.TRANSACTION_REPLAY, O.USER_AUTH,
O.ISSUING_BANK_AUTH
FIA_UAU.6/ Customer O.USER_AUTH
FIA_UID.1/ PAP Online
Transaction
O.TRANSACTION_BYPASS
FIA_UID.1/ Post-Issuance
Bank Management
O.TRANSACTION_BYPASS
FIA_UID.1/ Payment
Transaction
O.TRANSACTION_BYPASS, O.SIM_UNLOCK
FIA_USB.1 O.USER_AUTH, O.ISSUING_BANK_AUTH
FIA_SOS.2
O.TRANSACTION_REPLAY, O.USER_AUTH,
O.ISSUING_BANK_AUTH
FDP_DAU.1 O.DATA_INTEGRITY
FDP_ITC.2/ Post-Issuance
Bank Management
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ITC.2/ PAP Transaction
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ETC.1
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_ITC.1
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
O.AUTHORISATION_CONTROL,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FDP_UIT.1
O.TRANSACTION_UNIQUENESS,
O.TRANSACTION_REPLAY,
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 125 / 133
No disclosure to a third party without prior written consent of Gemalto
Security Functional
Requirements
Security Objectives
O.DATA_INTEGRITY, O.RISK_MNGT
FPT_TDC.1
O.TRANSACTION_INTEGRITY,
O.TRANSACTION_BYPASS,
O.ISSUING_BANK_AUTH,
O.DATA_DISCLOSURE, O.DATA_INTEGRITY
FTP_ITC.1 O.DATA_INTEGRITY
FPR_UNO.1 O.DATA_DISCLOSURE
Table 14: SFRs and Security Objectives
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 126 / 133
No disclosure to a third party without prior written consent of Gemalto
6.3.3 Dependencies
6.3.3.1 SFRs Dependencies
Requirements
CC
Dependencies
Satisfied Dependencies
FDP_ACC.2/ PAP Application (FDP_ACF.1) FDP_ACF.1/ PAP Application
FDP_ACC.2/ PAP Activation (FDP_ACF.1) FDP_ACF.1/ PAP Activation
FDP_ACC.2/ PAP
Administration Management
(FDP_ACF.1)
FDP_ACF.1/ PAP Administration
Management
FDP_ACC.2/ PAP Payment
Transaction Management
(FDP_ACF.1)
FDP_ACF.1/ PAP Payment Transaction
Management
FDP_ACC.2/ Post-Issuance
Bank Management
(FDP_ACF.1)
FDP_ACF.1/ Post-Issuance Bank
Management
FDP_ACC.2/ PAP Offline
Authentication
(FDP_ACF.1) FDP_ACF.1/ PAP Offline Authentication
FDP_ACC.2/ PAP Transaction (FDP_ACF.1) FDP_ACF.1/ PAP Transaction
FDP_ACF.1/ PAP Application
(FDP_ACC.1) and
(FMT_MSA.3)
FDP_ACC.2/ PAP Application, FMT_MSA.3
FDP_ACF.1/ PAP Activation
(FDP_ACC.1) and
(FMT_MSA.3)
FDP_ACC.2/ PAP Activation, FMT_MSA.3
FDP_ACF.1/ PAP
Administration Management
(FDP_ACC.1) and
(FMT_MSA.3)
FDP_ACC.2/ PAP Administration
Management, FMT_MSA.3
FDP_ACF.1/ PAP Payment
Transaction Management
(FDP_ACC.1) and
(FMT_MSA.3)
FDP_ACC.2/ PAP Payment Transaction
Management, FMT_MSA.3
FDP_ACF.1/ Post-Issuance
Bank Management
(FDP_ACC.1) and
(FMT_MSA.3)
FDP_ACC.2/ Post-Issuance Bank
Management, FMT_MSA.3
FDP_ACF.1/ PAP Offline
Authentication
(FDP_ACC.1) and
(FMT_MSA.3)
FDP_ACC.2/ PAP Offline Authentication,
FMT_MSA.3
FDP_ACF.1/ PAP Transaction
(FDP_ACC.1) and
(FMT_MSA.3)
FDP_ACC.2/ PAP Transaction, FMT_MSA.3
FDP_IFC.2/ PAP Offline
Authentication
(FDP_IFF.1) FDP_IFF.1/ PAP Offline Authentication
FDP_IFC.2/ PAP Offline
Transaction
(FDP_IFF.1) FDP_IFF.1/ PAP Offline Transaction
FDP_IFC.2/ PAP Online
Transaction
(FDP_IFF.1) FDP_IFF.1/ PAP Online Transaction
FDP_IFC.2/ Post-Issuance
Bank Management
(FDP_IFF.1)
FDP_IFF.1/ Post-Issuance Bank
Management
FDP_IFF.1/ PAP Offline
Authentication
(FDP_IFC.1) and
(FMT_MSA.3)
FDP_IFC.2/ PAP Offline Authentication,
FMT_MSA.3
FDP_IFF.1/ PAP Offline
Transaction
(FDP_IFC.1) and
(FMT_MSA.3)
FDP_IFC.2/ PAP Offline Transaction,
FMT_MSA.3
FDP_IFF.1/ PAP Online
Transaction
(FDP_IFC.1) and
(FMT_MSA.3)
FDP_IFC.2/ PAP Online Transaction,
FMT_MSA.3
FDP_IFF.1/ Post-Issuance
Bank Management
(FDP_IFC.1) and
(FMT_MSA.3)
FDP_IFC.2/ Post-Issuance Bank
Management, FMT_MSA.3
FAU_ARP.1 (FAU_SAA.1) FAU_SAA.1
FAU_SAA.1 (FAU_GEN.1) FAU_GEN.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 127 / 133
No disclosure to a third party without prior written consent of Gemalto
Requirements
CC
Dependencies
Satisfied Dependencies
FAU_GEN.1 (FPT_STM.1)
FAU_SAR.1/CUSTOMER (FAU_GEN.1) FAU_GEN.1
FAU_SAR.1/ISSUING_BANK (FAU_GEN.1) FAU_GEN.1
FCS_CKM.1/Session Keys
(FCS_CKM.2 or
FCS_COP.1) and
(FCS_CKM.4)
FCS_COP.1/Offline Data Authentication,
FCS_COP.1/Script Processing
FCS_CKM.4/Session Keys
FCS_CKM.4/Session Keys
(FDP_ITC.1 or
FDP_ITC.2 or
(FCS_CKM.1)
FCS_CKM.1/Session Keys
FCS_COP.1/Offline Data
Authentication
(FCS_CKM.1 or
FDP_ITC.1 or
FDP_ITC.2) and
(FCS_CKM.4)
FCS_CKM.1/Session Keys
FCS_COP.1/Application
Cryptogram
(FCS_CKM.1 or
FDP_ITC.1 or
FDP_ITC.2) and
(FCS_CKM.4)
FDP_ITC.2/ PAP Transaction
FCS_COP.1/Script Processing
(FCS_CKM.1 or
FDP_ITC.1 or
FDP_ITC.2) and
(FCS_CKM.4)
FDP_ITC.2/ Post-Issuance Bank
Management
FCS_COP.1/Messages Data
Integrity
(FCS_CKM.1 or
FDP_ITC.1 or
FDP_ITC.2) and
(FCS_CKM.4)
FDP_ITC.1
FCS_COP.1/Messages Data
Confidentiality
(FCS_CKM.1 or
FDP_ITC.1 or
FDP_ITC.2) and
(FCS_CKM.4)
FDP_ITC.1
FDP_SDI.2 No Dependencies
FPT_TST.1 No Dependencies
FPT_RPL.1 No Dependencies
FDP_RIP.1 No Dependencies
FMT_SMF.1/ Functionalities No Dependencies
FMT_MOF.1/ Parameters
(FMT_SMF.1) and
(FMT_SMR.1)
FMT_SMF.1/ Functionalities, FMT_SMR.1
FMT_MTD.1/ Secrets
(FMT_SMF.1) and
(FMT_SMR.1)
FMT_SMF.1/ Functionalities, FMT_SMR.1
FMT_MSA.1/ Issuing Bank
(FDP_ACC.1 or
FDP_IFC.1) and
(FMT_SMF.1) and
(FMT_SMR.1)
FDP_ACC.2/ Post-Issuance Bank
Management, FDP_IFC.2/ Post-Issuance
Bank Management, FMT_SMF.1/
Functionalities, FMT_SMR.1
FMT_MSA.2
(FDP_ACC.1 or
FDP_IFC.1) and
(FMT_MSA.1) and
(FMT_SMR.1)
FDP_ACC.2/ Post-Issuance Bank
Management,FDP_IFC.2/ Post-Issuance
Bank Management, FMT_MSA.1/ Issuing
Bank, FMT_SMR.1
FMT_MSA.3
(FMT_MSA.1) and
(FMT_SMR.1)
FMT_MSA.1/ Issuing Bank, FMT_SMR.1
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 128 / 133
No disclosure to a third party without prior written consent of Gemalto
Requirements
CC
Dependencies
Satisfied Dependencies
FMT_SMR.1 (FIA_UID.1)
FIA_UID.1/ PAP Online Transaction,
FIA_UID.1/ Post-Issuance Bank
Management
FIA_AFL.1/ Customer (FIA_UAU.1) FIA_UAU.1/ PAP Online Transaction
FIA_AFL.1/ Issuing Bank (FIA_UAU.1)
FIA_UAU.1/ PAP Online Transaction,
FIA_UAU.1/ Post-Issuance Bank
Management
FIA_ATD.1 No Dependencies
FIA_UAU.1/ PAP Online
Transaction
(FIA_UID.1) FIA_UID.1/ PAP Online Transaction
FIA_UAU.1/ Post-Issuance
Bank Management
(FIA_UID.1)
FIA_UID.1/ Post-Issuance Bank
Management
FIA_UAU.1/ Payment
Transaction
(FIA_UID.1) FIA_UID.1/ Payment Transaction
FIA_UAU.3 No Dependencies
FIA_UAU.4 No Dependencies
FIA_UAU.6/ Customer No Dependencies
FIA_UID.1/ PAP Online
Transaction
No Dependencies
FIA_UID.1/ Post-Issuance
Bank Management
No Dependencies
FIA_UID.1/ Payment
Transaction
No Dependencies
FIA_USB.1 (FIA_ATD.1) FIA_ATD.1
FIA_SOS.2 No Dependencies
FDP_DAU.1 No Dependencies
FDP_ITC.2/ Post-Issuance
Bank Management
(FDP_ACC.1 or
FDP_IFC.1) and
(FPT_TDC.1) and
(FTP_ITC.1 or
FTP_TRP.1)
FDP_ACC.2/ Post-Issuance Bank
Management, FDP_IFC.2/ Post-Issuance
Bank Management, FTP_ITC.1, FPT_TDC.1
FDP_ITC.2/ PAP Transaction
(FDP_ACC.1 or
FDP_IFC.1) and
(FPT_TDC.1) and
(FTP_ITC.1 or
FTP_TRP.1)
FDP_ACC.2/ PAP Transaction, FDP_IFC.2/
PAP Online Transaction, FTP_ITC.1, ,
FPT_TDC.1
FDP_ETC.1
(FDP_ACC.1 or
FDP_IFC.1)
FDP_ACC.2/ PAP Application, FDP_ACC.2/
PAP Activation, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/
PAP Payment Transaction Management,
FDP_ACC.2/ Post-Issuance Bank
Management, FDP_ACC.2/ PAP Offline
Authentication, FDP_ACC.2/ PAP
Transaction, FDP_IFC.2/ PAP Offline
Authentication, FDP_IFC.2/ PAP Offline
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFC.2/ Post-Issuance
Bank Management
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 129 / 133
No disclosure to a third party without prior written consent of Gemalto
Requirements
CC
Dependencies
Satisfied Dependencies
FDP_ITC.1
(FDP_ACC.1 or
FDP_IFC.1) and
(FMT_MSA.3)
FDP_ACC.2/ PAP Application, FDP_ACC.2/
PAP Activation, FDP_ACC.2/ PAP
Administration Management, FDP_ACC.2/
PAP Payment Transaction Management,
FDP_ACC.2/ Post-Issuance Bank
Management, FDP_ACC.2/ PAP Offline
Authentication, FDP_ACC.2/ PAP
Transaction, FDP_IFC.2/ PAP Offline
Authentication, FDP_IFC.2/ PAP Offline
Transaction, FDP_IFC.2/ PAP Online
Transaction, FDP_IFC.2/ Post-Issuance
Bank Management, FMT_MSA.3
FDP_UIT.1
(FDP_ACC.1 or
FDP_IFC.1) and
(FTP_ITC.1 or
FTP_TRP.1)
FDP_IFC.2/ PAP Offline Transaction,
FDP_IFC.2/ PAP Online Transaction,
FDP_IFC.2/ Post-Issuance Bank
Management, FTP_ITC.1
FTP_ITC.1 No Dependencies
FPR_UNO.1 No Dependencies
FPT_TDC.1 No Dependencies
Table 15: SFRs Dependencies
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 130 / 133
No disclosure to a third party without prior written consent of Gemalto
Rationale for the exclusion of Dependencies
The dependency FPT_STM.1 of FAU_GEN.1 is discarded. The dependency with FPT_STM.1 is not
relevant to the TOE: correctness of time is of no use for the TOE objectives.
The dependency FCS_CKM.4 of FCS_COP.1/Offline Data Authentication is discarded. The [PM-
1]&[PM-2] do not require any specific destruction method.
The dependency FCS_CKM.4 of FCS_COP.1/Application Cryptogram is discarded. The [PM-
1]&[PM-2] do not require any specific destruction method.
The dependency FCS_CKM.4 of FCS_COP.1/Script Processing is discarded. The [PM-1]&[PM-2]
does not require any specific destruction method.
The dependency FCS_CKM.4 of FCS_COP.1/Messages Data Integrity is discarded. The [PM-
1]&[PM-2] do not require any specific destruction method.
The dependency FCS_CKM.4 of FCS_COP.1/Messages Data Confidentiality is discarded. The
[PM-1]&[PM-2] does not require any specific destruction method.
6.3.3.2 SARs Dependencies
Requirements CC Dependencies Satisfied Dependencies
AVA_VAN.5
(ADV_ARC.1) and (ADV_FSP.4) and
(ADV_IMP.1) and (ADV_TDS.3) and
(AGD_OPE.1) and (AGD_PRE.1) and
(ATE_DPT.1)
ADV_ARC.1, ADV_FSP.4,
ADV_IMP.1, ADV_TDS.3,
AGD_OPE.1, AGD_PRE.1,
ATE_DPT.1
ADV_ARC.1 (ADV_FSP.1) and (ADV_TDS.1) ADV_FSP.4, ADV_TDS.3
ADV_FSP.4 (ADV_TDS.1) ADV_TDS.3
ADV_IMP.1 (ADV_TDS.3) and (ALC_TAT.1) ADV_TDS.3, ALC_TAT.1
ADV_TDS.3 (ADV_FSP.4) ADV_FSP.4
AGD_OPE.1 (ADV_FSP.1) ADV_FSP.4
AGD_PRE.1 No Dependencies
ALC_CMC.4
(ALC_CMS.1) and (ALC_DVS.1) and
(ALC_LCD.1)
ALC_CMS.4, ALC_DVS.2,
ALC_LCD.1
ALC_CMS.4 No Dependencies
ALC_DEL.1 No Dependencies
ALC_DVS.2 No Dependencies
ALC_LCD.1 No Dependencies
ALC_TAT.1 (ADV_IMP.1) ADV_IMP.1
ASE_CCL.1
(ASE_ECD.1) and (ASE_INT.1) and
(ASE_REQ.1)
ASE_ECD.1, ASE_INT.1,
ASE_REQ.2
ASE_ECD.1 No Dependencies
ASE_INT.1 No Dependencies
ASE_OBJ.2 (ASE_SPD.1) ASE_SPD.1
ASE_REQ.2 (ASE_ECD.1) and (ASE_OBJ.2) ASE_ECD.1, ASE_OBJ.2
ASE_SPD.1 No Dependencies
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 131 / 133
No disclosure to a third party without prior written consent of Gemalto
Requirements CC Dependencies Satisfied Dependencies
ASE_TSS.1
(ADV_FSP.1) and (ASE_INT.1) and
(ASE_REQ.1)
ADV_FSP.4, ASE_INT.1,
ASE_REQ.2
ATE_COV.2 (ADV_FSP.2) and (ATE_FUN.1) ADV_FSP.4, ATE_FUN.1
ATE_DPT.1
(ADV_ARC.1) and (ADV_TDS.2) and
(ATE_FUN.1)
ADV_ARC.1, ADV_TDS.3,
ATE_FUN.1
ATE_FUN.1 (ATE_COV.1) ATE_COV.2
ATE_IND.2
(ADV_FSP.2) and (AGD_OPE.1) and
(AGD_PRE.1) and (ATE_COV.1) and
(ATE_FUN.1)
ADV_FSP.4, AGD_OPE.1,
AGD_PRE.1, ATE_COV.2,
ATE_FUN.1
Table 16: SARs Dependencies
6.3.4 Rationale for the Security Assurance Requirements
EAL4 allows a developer to attain a reasonably high assurance level without the need for highly
specialized processes and practices. It corresponds to a white box analysis and it can be considered
as a reasonable level that can be applied to an existing product line without undue expense and
complexity.
6.3.5 ALC_DVS.2 Sufficiency of security measures
This component was added in order to provide a higher assurance on the security of the PAP
development and manufacturing processes, especially for the secure handling of the embedded data.
Those requirements appear as the most adequate ones for a manufacturing process in which several
actors exchange and store highly sensitive information (confidential code, cryptographic keys,
peronalisation data, etc).
6.3.6 AVA_VAN.5 Advanced methodical vulnerability analysis
This component added to EAL 4 package in order to provide sufficient robustness to counter an
attacker with high attack potential without the support of a protecting environment. Moreover, the PAP
is a highly sensitive application. Potential attackers for such kind of applications could include
experienced hackers or international organizations disposing of advanced means and resources.
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 132 / 133
No disclosure to a third party without prior written consent of Gemalto
7 TOE Summary Specification
This section defines the summary specification.
7.1 Security functions
The F.REACTION function allows to:
 Manage the policy of attack reaction according to the security violations
 Manage the audit generation and review
 Manage the automatic self-tests
The F.CRYPTO_OPERATION function allows to:
 Manage the creation and deletion of cryptographic keys
 Manage the cryptographic operations
 Manage the generation of secrets
The F.ACCESS-AND-FLOW_CONTROL function allows to:
 Manage the access control and rules for following operations:
o SELECT
o SET STATUS
o APPLICATION-BLOCK and APPLICATION-UNBLOCK
o VERIFY
o GENERATE AC
o READ RECORD
o PIN CHANGE-UNBLOCK and OFFLINE CHANGE-PIN
o COUNTER RESET
o PUT DATA
o UPDATE RECORD
 Manage the information flow control and rules for following operations:
o READ RECORD, GENERATE AC
o APPLICATION-, APPLICATION-UNBLOCK, PUT DATA, UPDATE RECORD, PIN
CHANGE-UNBLOCK
The F.DATA-IMPORT_EXPORT function allows to:
 Manage the import of data protected in term of integrity or confidentiality
 Manage the export of data protected in term of integrity or confidentiality
The F.CUSTOMER-AUTHENTICATION function allows to:
 Manage the customer authentication
The F.ISSUING-BANK-AUTHENTICATION function allows to:
 Manage the issuing-bank authentication
Reference R0R21486_001_CCD_ASE
Release 2.04p
(Printed copy not controlled: verify the
version before using)
Classification level Public Pages 133
ST Applicable on: July 2013 Page : 133 / 133
No disclosure to a third party without prior written consent of Gemalto
The F.PROTECTION function allows to:
 Management
 Manage the integrity or confidentiality of User data and TSF data that required integrity or
confidentiality
 Manage the replay detection
 Manage the residual information protection
 Manage the secure communication channel
 Manage Reference Personal Code and PAP Keys unoservability
7.2 Assurance measures
Assurance measure Document title
MPP.ASE Mobile Paypass v1.0 on Orange NFC V2 G1 Security Target
MPP.ADV ADV documents
MPP.ADV_IMP Source code Mobile Paypass v1.0
MPP.AGD AGD documents
MPP.ALC ALC documents
MPP.ATE ATE documents
MPP.AVA Samples Mobile Paypass v1.0 on Orange NFC V2 G1
END OF THE DOCUMENT