SERTIT, P.O. Box 14, N-1306 Bærum postterminal, NORWAY Phone: +47 67 86 40 00 Fax: +47 67 86 40 09 E-mail: post@sertit.no Internet: www.sertit.no Sertifiseringsmyndigheten for IT-sikkerhet Norwegian Certification Authority for IT Security SERTIT-049 CR Certification Report Issue 1.0 28 November 2013 Thinklogical VX320 Audio Router Matrix Switch CERTIFICATION REPORT - SERTIT STANDARD REPORT TEMPLATE SD 009 VERSION 2.1 11.11.2011 Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 2 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 ARRANGEMENT ON THE RECOGNITION OF COMMON CRITERIA CERTIFICATES IN THE FIELD OF INFORMATION TECHNOLOGY SECURITY SERTIT, the Norwegian Certification Authority for IT Security, is a member of the above Arrangement and as such this confirms that the Common Criteria certificate has been issued by or under the authority of a Party to this Arrangement and is the Party’s claim that the certificate has been issued in accordance with the terms of this Arrangement The judgements contained in the certificate and Certification Report are those of SERTIT which issued it and the Norwegian evaluation facility (EVIT) which carried out the evaluation. There is no implication of acceptance by other Members of the Agreement Group of liability in respect of those judgements or for loss sustained as a result of reliance placed upon those judgements by a third party. [*] Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 3 of 20 Contents 1 Certification Statement 5 2 Abbreviations 6 3 References 7 4 Executive Summary 8 4.1 Introduction 8 4.2 Evaluated Product 8 4.3 TOE scope 8 4.3.1 System type and overview 8 4.3.2 Physical boundaries 9 4.3.3 Logical boundaries 9 4.4 Protection Profile Conformance 9 4.5 Assurance Level 10 4.6 Security Policy 10 4.7 Security Claims 10 4.8 Threats Countered 10 4.9 Threats Countered by the TOE’s environment 10 4.10 Threats and Attacks not Countered 10 4.11 Environmental Assumptions and Dependencies 10 4.12 IT Security Objectives 11 4.13 Non-IT Security Objectives 11 4.14 Security Functional Requirements 11 4.15 Security Function Policy 12 4.16 Evaluation Conduct 12 4.17 General Points 13 5 Evaluation Findings 14 5.1 Introduction 15 5.2 Delivery 15 5.3 Installation and Guidance Documentation 15 5.4 Misuse 15 5.5 Vulnerability Analysis 16 5.6 Developer’s Tests 16 5.7 Evaluators’ Tests 16 6 Evaluation Outcome 17 6.1 Certification Result 17 6.2 Recommendations 17 Annex A: Evaluated Configuration 18 TOE Identification 18 TOE Documentation 18 Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 4 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 TOE Configuration 18 Environmental Configuration 20 Thinklogical VX320 Audio Router Matrix Switch EAL 4 1 Certification Statement Thinklogical VX320 Audio Router Matrix Switch is a fiber optic switch that uses multi-mode or single-mode fiber optics to transmit and receive a digital audio pulse stream without alteration or interpretation of the original signal. ThinklogicalVX320 Audio Router Matrix Switch has been evaluated under the terms of the Norwegian Certification Scheme for lT Security and has met the Common Criteria Part 3 (lS0/lEC 15408) conformant requirements of Evaluation Assurance Level EAL 4 for the specified Common Criteria Part 2 (lS0/lEC 15408) conformant functionality when running on the platforms specified in Annex A. Author Rage, Arne H Certifier ":\^*ll' Ouality Assurance iOt iAr Lars Borgos ,1,// Ou a I ity Assu ra nr,"%' t"ttu Approved Date a pproved SERTIT-049 CR lssue 28 November 2013 1.0 Page 5 of 20 Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 6 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 2 Abbreviations CC Common Criteria for Information Technology Security Evaluation (ISO/IEC 15408) CCRA Arrangement on the Recognition of Common Criteria Certificates in the Field of Information Technology Security CEM Common Methodology for Information Technology Security Evaluation EAL Evaluation Assurance Level EOR Evaluation Observation Report ETR Evaluation Technical Report EVIT Evaluation Facility under the Norwegian Certification Scheme for IT Security EWP Evaluation Work Plan SERTIT Norwegian Certification Authority for IT Security SPM Security Policy Model ST Security Target TOE Target of Evaluation TSF TOE Security Functions TSP TOE Security Policy Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 7 of 20 3 References [1] Thinklogical VX 320 Audio Router Matrix Switch Security Target, version 1.2, August 2013. [2] Common Criteria Part 1, CCMB-2012-09-001, Version 3.1 R4, September 2012. [3] Common Criteria Part 2, CCMB-2012-09-002, Version 3.1 R4, September 2012. [4] Common Criteria Part 3, CCMB-2012-09-003, Version 3.1 R4, September 2012. [5] The Norwegian Certification Scheme, SD001E, Version 8.0, 20 August 2010. [6] Common Methodology for Information Technology Security Evaluation, Evaluation Methodology, CCMB-2012-09-004, Version 3.1 R4, September 2012. [7] Evaluation Technical Report Common Criteria EAL4 Evaluation of Thinklogical Router KVM Matrix Switches, Thinklogical MX 48 (SERTIT - 047), Thinklogical VX 80 (SERTIT - 048), Thinklogical VX 320 Audio (SERTIT - 049), Thinklogical VX 320 Video (SERTIT - 050), Thinklogical VX 640 (SERTIT - 051), version 0.5, 28 November 2013. [8] ALC.DEL_1_0.doc version 1.0 06/01/10 [9] Manual_VX40_VX80_VX160_VX320_Rev_N.pdf, VX40, VX80, VX160, VX320, VX320Video, VX320Audio router KVM Matrix Switch Product Manual, Rev. N September 2013 Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 8 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 4 Executive Summary 4.1 Introduction This Certification Report states the outcome of the Common Criteria security evaluation of Thinklogical VX320 Audio Router Matrix Switch to the Sponsor, Thinklogical , and is intended to assist prospective consumers when judging the suitability of the IT security of the product for their particular requirements. Prospective consumers are advised to read this report in conjunction with the Security Target[1] which specifies the functional, environmental and assurance evaluation requirements. 4.2 Evaluated Product The product evaluated was Thinklogical VX320 Audio Router Matrix Switch (VXR- A00320 Rev A) And Data Input/Output cards:  Velocity Matrix Router 320 Audio Data Input/Output Card, 16 Ports, SFP+, Multi Mode (VXM-A00016 Rev A),  Velocity Matrix Router 320 Audio Data Input/Output Card, 16 Ports, SFP+, Single Mode (VXM-A00S16 Rev A)  Velocity Matrix Router 320 Audio Data Input Retimer Card, 16 Ports, SFP+, Multi Mode (VXM-A00T16 Rev A)  Velocity Matrix Router 320 Audio Data Input Retimer Card, 16 Ports, SFP+, Single Mode (VXM-A0ST16 Rev A) This product is also described in this report as the Target of Evaluation (TOE). The developer was Thinklogical. Details of the evaluated configuration, including the TOE’s supporting guidance documentation, are given in Annex A. 4.3 TOE scope 4.3.1 System type and overview The TOE is a single matrix routing system, which provides connection of 320 optical inputs to any or all of the 320 optical outputs. The TOE consists of 20 Data Input and Output Cards having 16 optical input and output ports. The TOE allows for remote operation of shared computers using sets of shared peripherals, dynamically connecting (switching) physical ports on a particular computer to a particular shared peripheral set. The TOE consists of the following hardware devices: 1. Thinklogical Matrix Switch (VX 320 Audio Router) 2. 20 Data Input/Output Cards Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 9 of 20 Each Transmitter and Receiver Port Group is composed of two ports: T port and R port. Two optical cables are then required to connect a Velocity Transmitter or Receiver Extender to a Transmitter or Receiver Port Group on the Switch. One cable is used to transmit data from the Extender to the Switch; the other cable is used to transmit data from the Switch to the Extender. As a result, a bi-directional connection is established, where data can flow in both directions. All data types, including audio and serial data are converted to an optical form and transmitted in a single optical cable. The purpose of the Switch is to establish logical connections between Transmitter and Receiver Port Groups, while preserving Data Separation Security Function Policy (SFP). Data Separation Security Function Policy (SFP) states that data shall flow between Transmitter Port A and Receiver Port B if and only if a deliberate logical connection has been established to connect A to B. There shall be no other data flow between a Transmitter Port or a Receiver Port and any other physical port on the Switch. The use of a restrict or partition table in the system overrides any deliberate logical connection established between Transmitter Port A and Receiver Port B since the restrict policy disallows connection of a higher priority input to a lower priority output and the partition policy disallows connection of an input from one partition going to the output of another partition. The TOE connections are first controlled by restrict and priority tables and then controlled, if not in conflict with the restrict or partition tables, over the serial RS- 232/console interface, a wired 10/100BASE-TX LAN connection. 4.3.2 Physical boundaries MX48 Router Matrix Switch is a hardware device. TOE Physical Boundaries then correspond to the physical boundaries of the device enclosure. 4.3.3 Logical boundaries TOE logical boundaries include all software and firmware components inside the VX 320 Audio Router Matrix Switch. The following Security Functions are provided by the TOE  User Data Protection (enforces Data Separation SFP), This Security Target includes all product security features. There are no security features outside the scope of the evaluation. 4.4 Protection Profile Conformance The Security Target[1] did not claim conformance to any protection profile. Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 10 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 4.5 Assurance Level The Security Target[1] specified the assurance requirements for the evaluation. Predefined evaluation assurance level EAL 4 was used. Common Criteria Part 3[4] describes the scale of assurance given by predefined assurance levels EAL1 to EAL7. An overview of CC is given in CC Part 1[2]. 4.6 Security Policy The TOE security policies are detailed in the Security Target [1]. 4.7 Security Claims The Security Target[1] fully specifies the TOE’s security objectives, the threats which these objectives meet and security functional requirements and security functions to elaborate the objectives. All of the SFR’s are taken from CC Part 2[3]; use of this standard facilitates comparison with other evaluated products. 4.8 Threats Countered  Residual data may be transferred between different port groups in violation of data separation security policy.  State information may be transferred to a port group other than the intended one. 4.9 Threats Countered by the TOE’s environment  The TOE may be delivered and installed in a manner which violates the security policy.  An attack on the TOE may violate the security policy. 4.10 Threats and Attacks not Countered No threats or attacks that are not countered are described. 4.11 Environmental Assumptions and Dependencies  The switch, the transmitters, the receivers, the optical connections from the Switch to the transmitters and receivers and the wired network connections from the Switch to the administrators are physically secure.  The TOE meets the appropriate national requirements (in the country where used) for conducted/radiated electromagnetic emissions.  The TOE is installed and managed in accordance with the manufacturer’s directions.  The TOE users and administrators are non-hostile and follow all usage guidance.  Vulnerabilities associated with attached devices are a concern of the application scenario and not of the TOE. Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 11 of 20 4.12 IT Security Objectives  The TOE shall not violate the confidentiality of information which it processes. Information generated within any peripheral set/computer connection shall not be accessible by any other peripheral set/computer connection.  No information shall be shared between switched computers and peripheral sets via the TOE in violation of Data Separation SFP. 4.13 Non-IT Security Objectives  The TOE shall meet the appropriate national requirements (in the country where used) for conducted/radiated electromagnetic emissions.  The TOE shall be installed and managed in accordance with the manufacturer’s directions.  The authorized user shall be non-hostile and follow all usage guidance.  The Switch, the transmitters, the receivers, the optical connections from the Switch to the transmitters and receivers and the wired network connections from the TOE to the administrators shall be physically secure.  Vulnerabilities associated with attached devices or their connections to the TOE, shall be a concern of the application scenario and not of the TOE. 4.14 Security Functional Requirements  FDP_ETC.1.1 Enforce the Data Separation Policy when exporting user data, controlled under the SFP, from outside of the TOE.  FDP_ETC.1.2 Export the user data without the user data's associated security attributes.  FDP_IFC.1.1 Enforce the Data Separation Policy on the set of Transmitter and Receiver Port Groups, and the bi-directional flow of data and state information between the shared peripherals and the switched computers.  FDP_IFF.1.1 Enforce the Data Separation Policy based on the following types of subject and information security attributes: - Transmitter and Receiver Port Groups (subjects) - peripheral data and state information (objects) - port group IDs - logical connections of Transmitter and Receiver Groups (attributes)  FDP_IFF.1.2 Permit an information flow between a controlled subject and controlled information via a controlled operation if the following rules hold: - peripheral data and state information can only flow between Transmitter and Receiver port groups that have been previously logically connected by the administrator using the TOE management interface  FDP_IFF.1.3 Enforce that Transmitter Port Group may be logically connected to multiple Receiver Port Groups, out of which bi-directional information flow will be established only with a single Primary Receiver Port Group selected by the administrator. The remaining Non-Primary Receiver port groups will only Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 12 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 receive unidirectional multicast audio and data signals. Any Receiver Port Group may only be logically connected to a single Transmitter Port Group.  FDP_IFF.1.5 Explicitly deny an information flow based on the following rules: - No data or state information flow shall be allowed between logically unconnected port groups. - No data or state information flow shall be allowed between any two Receiver Port Groups. - No data or state information flow shall be allowed between any two Transmitter Port Groups. No data or state information flow shall be allowed between any Receiver or Transmitter Port Group and any other non-optical physical port on the Switch  FDP_ITC.1.1 Enforce the Data Separation Policy when importing user data, controlled under the SFP, from outside of the TOE.  FDP_ITC.1.2 Ignore any security attributes associated with the user data when imported from outside the TOE. 4.15 Security Function Policy The TOE logically connects Transmitter and Receiver Port Groups according to the current switching configuration. The data flows between a particular Transmitter Port Group and a set of Receiver Port Groups if and only if there is an active logical connection connecting these. If there are multiple Receiver Port Groups connected to a Transmitter Port Group, bi-directional information flow will be then established between the Primary Receiver Port Group and the Transmitter Port Group. The remaining Non-Primary Receiver Port Groups will receive uni-directional multi-cast data and audio signals from the Transmitter Port Group. 4.16 Evaluation Conduct The evaluation was carried out in accordance with the requirements of the Norwegian Certification Scheme for IT Security as described in SERTIT Document SD001E[5]. The Scheme is managed by the Norwegian Certification Authority for IT Security (SERTIT). As stated on page 2 of this Certification Report, SERTIT is a member of the Arrangement on the Recognition of Common Criteria Certificates in the Field of Information Technology Security (CCRA), and the evaluation was conducted in accordance with the terms of this Arrangement. The purpose of the evaluation was to provide assurance about the effectiveness of the TOE in meeting its Security Target[1], which prospective consumers are advised to read. To ensure that the Security Target[1] gave an appropriate baseline for a CC evaluation, it was first itself evaluated. The TOE was then evaluated against this baseline. Both parts of the evaluation were performed in accordance with CC Part 3[4] and the Common Evaluation Methodology (CEM)[6]. SERTIT monitored the evaluation which was carried out by the Norconsult AS IT Security Evaluation Facility (ITSEF/EVIT). The evaluation was completed when the EVIT Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 13 of 20 submitted the Evaluation Technical Report (ETR)[7] to SERTIT on 28.11.2013. SERTIT then produced this Certification Report. 4.17 General Points The evaluation addressed the security functionality claimed in the Security Target[1] with reference to the assumed operating environment specified by the Security Target[1]. The evaluated configuration was that specified in Annex A. Prospective consumers are advised to check that this matches their identified requirements and give due consideration to the recommendations and caveats of this report. Certification does not guarantee that the IT product is free from security vulnerabilities. This Certification Report and the belonging Certificate only reflect the view of SERTIT at the time of certification. It is furthermore the responsibility of users (both existing and prospective) to check whether any security vulnerabilities have been discovered since the date shown in this report. This Certification Report is not an endorsement of the IT product by SERTIT or any other organization that recognizes or gives effect to this Certification Report, and no warranty of the IT product by SERTIT or any other organization that recognizes or gives effect to this Certification Report is either expressed or implied. Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 14 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 5 Evaluation Findings The evaluators examined the following assurance classes and components taken from CC Part 3 [4]. These classes comprise the EAL 4 assurance package. Assurance class Assurance components Development ADV_ARC.1 Security architecture description ADV_FSP.4 Complete functional specification ADV_IMP.1 Implementation representation of the TSF ADV_TDS.3 Basic modular design Guidance documents AGD_OPE.1 Operational user guidance AGD_PRE.1 Preparative procedures Life-cycle support ALC_CMC.4 Production support, acceptance procedures and automation ALC_CMS.4 Problem tracking CM coverage ALC_DEL.1 Delivery procedures ALC_DVS.1 Identification of security measures ALC_LCD.1 Developer defined life-cycle model ALC_TAT.1 Well-defined development tools Security Target evaluation ASE_CCL.1 Conformance claims ASE_ECD.1 Extended components definition ASE_INT.1 ST introduction ASE_OBJ.2 Security objectives ASE_REQ.2 Derived security requirements ASE_SPD.1 Security problem definition ASE_TSS.1 TOE summary specification Tests ATE_COV.2 Analysis of coverage ATE_DPT.1 Testing: basic design ATE_FUN.1 Functional testing ATE_IND.2 Independent testing – sample Vulnerability assessment AVA_VAN.3 Focused vulnerability analysis All assurance classes were found to be satisfactory and were awarded an overall “pass” verdict. Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 15 of 20 5.1 Introduction The evaluation addressed the requirements specified in the Security Target[1]. The results of this work were reported in the ETR[7] under the CC Part 3[4] headings. The following sections note considerations that are of particular relevance to either consumers or those involved with subsequent assurance maintenance and re- evaluation of the TOE. 5.2 Delivery On receipt of the TOE, the consumer is recommended to check that the evaluated version has been supplied, and to check that the security of the TOE has not been compromised in delivery. Thinklogical’s delivery procedure [8] describes how the TOE is shipped from Thinklogical’s warehouse via Federal Express, UPS or DHL to the customer. The procedure explains that all tracking and shipment information are logged, and upon delivery of the TOE a signature is required. Each shipment is noted with dimension and weight, and hard copies of each shipment are held in Thinklogical’s Sales Order folder. The product manual [9] describes that users has to verify and ensure that all parts of the TOE has been delivered in the correct version. The text states that if the user has ordered an EAL4 certified unit, the user has to verify that he or she has received the proper materials. 5.3 Installation and Guidance Documentation A description of the secure installation of the TOE and the secure preparation of the operational environment in accordance with the security objectives in the ST [1] can be found in the product manual[9]. The guidance documentation [9] describes the security functionality and interfaces provided by the TSF, it provides instructions and guidelines for the secure use of the TOE, it addresses secure procedures for all modes of operation, facilitates prevention and detection of insecure TOE states. A list of all guidance documents evaluated can be found in Annex A. 5.4 Misuse There is always a risk of intentional and unintentional misconfigurations that could possibly compromise confidential information. Administrators should follow the guidance for the TOE in order to ensure that the TOE operates in a secure manner. The guidance document adequately describes the mode of operation of the TOE, all assumptions about the intended environment and all requirements for external security. Sufficient guidance is provided for the consumer to effectively administer and use the TOE’s security functions Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 16 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 5.5 Vulnerability Analysis The evaluators’ assessment of potential exploitable vulnerabilities in the TOE has been addressed and shows that the vulnerability analysis is complete, and that the TOE in its intended environment is resistant to attackers with an Enhanced-Basic attack potential. 5.6 Developer’s Tests The evaluators’ assessments of the developers’ tests shows that the developer testing requirements is extensive and that the TSF satisfies the TOE security functional requirements. The testing performed on the TOE by both the developer and evaluator showed that the EAL 4 assurance components requirements are fulfilled. 5.7 Evaluators’ Tests The evaluator have independently tested the TSFs and verified that the TOE behaves as specified in the design documentation and confidence in the developer's test results is gained by performing a sample of the developer's tests. Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 17 of 20 6 Evaluation Outcome 6.1 Certification Result After due consideration of the ETR[7], produced by the Evaluators, and the conduct of the evaluation, as witnessed by the Certifier, SERTIT has determined that Thinklogical VX320 Audio Router Matrix Switch meets the Common Criteria Part 3 conformant requirements of Evaluation Assurance Level EAL 4 for the specified Common Criteria Part 2 conformant functionality in the specified environment, when running on platforms specified in Annex A. 6.2 Recommendations Prospective consumers of Thinklogical VX320 Audio Router Matrix Switch should understand the specific scope of the certification by reading this report in conjunction with the Security Target[1]. The TOE should be used in accordance with a number of environmental considerations as specified in the Security Target. Only the evaluated TOE configuration should be installed. This is specified in Annex A with further relevant information given in Section 4.3 “TOE Scope” and Section 5 “Evaluation Findings”. The TOE should be used in accordance with the supporting guidance documentation included in the evaluated configuration. The above “Evaluation Findings” include a number of recommendations relating to the secure receipt, installation, configuration and operation of the TOE. Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 18 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 Annex A: Evaluated Configuration TOE Identification The TOE consists of:  Thinklogical VX320 Audio Router Matrix Switch (VXR-A00320 Rev A) And Data Input/Output cards:  Velocity Matrix Router 320 Audio Data Input/Output Card, 16 Ports, SFP+, Multi Mode (VXM-A00016 Rev A),  Velocity Matrix Router 320 Audio Data Input/Output Card, 16 Ports, SFP+, Single Mode (VXM-A00S16 Rev A)  Velocity Matrix Router 320 Audio Data Input Retimer Card, 16 Ports, SFP+, Multi Mode (VXM-A00T16 Rev A)  Velocity Matrix Router 320 Audio Data Input Retimer Card, 16 Ports, SFP+, Single Mode (VXM-A0ST16 Rev A) TOE Documentation The supporting guidance documents evaluated were: [a] Cover Page AGD.OPE.3.doc, OPERATIONAL USER GUIDANCE REV. C 01/23/2013 [b] Manual_VX40_VX80_VX160_VX320_Rev_M.pdf, VX40, VX80, VX160, VX320, VX320VIDEO, VX320AUDIO ROUTER KVM MATRIX SWITCH PRODUCT MANUAL REV. N SEPTEMBER 2013 [c] Manual_X4 Configurator.pdf, X4 CONFIGURATOR PRODUCT MANUAL OCTOBER 2012 [d] VxRouter-ASCII-API_4_1.pdf, VxRouter ASCII Interface 4.1 24/9-2012 [e] Using-the-ASCII-Interface_4_0.pdf, Using the VxRouter ASCII Interface 4.0 24/9-2012 [f] VX320V_Router_VEL-6_Quick_Start_Rev_A.pdf, QUICK-START GUIDE Router VX320V KVM MATRIX Switch As used with Thinklogical’s Velocitydvi-6 Video Extension System Rev. A 10/01-2013 TOE Configuration The following configuration was used for testing: Thinklogical VX320 Audio Router Matrix Switch EAL 4 SERTIT-049 CR Issue 1.0 28 November 2013 Page 19 of 20 The figure shows the VX80 Router in an evaluated configuration, however the layout is equivalent for the TOE. For use in an evaluated configuration, the MX and VX Routers must be located in a physically secure environment to which only authorized administrators has access. Similarly, the server used to manage the MX and VX Routers must be physically protected and have suitable identification/authentication mechanism to ensure that only trusted administrators have access. Some of the tools used during the evaluation were:  Microsoft Office 2010  Nmap port scanning 6.40  Zenmap (Nmap Security Scanner GUI)  Microsoft Hyperterminal  Noyes optical power meter, Model OPM 4-D, Serialnumber 1v52NM024  Putty Terminal Emulator  WinSCP  BusyBox v1.12.1  Oscilloscope Tektronic TDS6154C, asset number 1054750  Microsoft Telnet Thinklogical VX320 Audio Router Matrix Switch EAL 4 Page 20 of 20 SERTIT-049 CR Issue 1.0 28 November 2013 Environmental Configuration The TOE is a hardware device. The TOE provides remote connections from a set of shared computers to a set of shared peripherals. The switching capability of the TOE is used to connect ports on a particular computer to a particular peripheral set. The corresponding electronic signal from a computer port is transformed into an optical signal by the Velocity extender, transmitted through an optical fiber, switched by the Matrix Switch to another optical fiber, and then transformed back to an electronic form by the Velocity extender. The resulting signal is used by the shared peripherals.