cv act ePasslet Suite v2.1 – Java Card ap- plet configuration providing Machine Readable Travel Document with „ICAO Application”, Extended Access Control (EAC) Security Target BSI-DSZ-CC-0912 Common Criteria / ISO 15408 EAL 4+ Document Version 1.5 • 2014-10-01 cv cryptovision GmbH • Munscheidstr. 14 • 45886 Gelsenkirchen • Germany www.cryptovision.com • info@cryptovision.com • +49-209-167-2450 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 2 of 97 Content 1 Introduction............................................................................................................................................ 4 1.1 ST/TOE Identification.....................................................................................................................................4 1.2 ST overview ...................................................................................................................................................4 1.3 TOE overview.................................................................................................................................................5 2 Conformance claims ............................................................................................................................. 12 2.1 CC conformance ..........................................................................................................................................12 2.2 Statement of Compatibility concerning Composite Security Target ...........................................................12 3 Security problem definition.................................................................................................................. 28 3.1 Introduction.................................................................................................................................................28 3.2 Assumptions ................................................................................................................................................29 3.3 Threats.........................................................................................................................................................31 3.4 Organizational security policies...................................................................................................................33 4 Security objectives................................................................................................................................ 35 4.1 Security Objectives for the TOE...................................................................................................................35 4.2 Security Objectives for the Operational Environment ................................................................................37 4.3 Security Objective Rationale .......................................................................................................................40 5 Extended Components Definition......................................................................................................... 43 5.1 Definition of the Family FAU_SAS................................................................................................................43 5.2 Definition of the Family FCS_RND ...............................................................................................................43 5.3 Definition of the Family FIA_API..................................................................................................................44 5.4 Definition of the Family FMT_LIM...............................................................................................................45 5.5 Definition of the Family FPT_EMSEC ...........................................................................................................46 6 Security Requirements.......................................................................................................................... 48 6.1 Security Definitions .....................................................................................................................................48 6.2 Security Functional Requirements for the TOE ...........................................................................................50 6.3 Security Assurance Requirements for the TOE............................................................................................67 6.4 Security Requirements Rationale ................................................................................................................68 7 TOE summary specification (ASE_TSS) ................................................................................................. 76 7.1 Security Functionality..................................................................................................................................76 7.2 TOE summary specification rationale..........................................................................................................85 8 Crypto disclaimer.................................................................................................................................. 87 References..................................................................................................................................................... 90 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 3 of 97 Glossary ......................................................................................................................................................... 93 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 4 of 97 1 Introduction 1.1 ST/TOE Identification Title: cv act ePasslet Suite v2.1 – Java Card applet configuration providing Ma- chine Readable Travel Document with „ICAO Application”, Extended Access Control (EAC) – Security Target Version: v1.5 Origin: cv cryptovision GmbH Compliant to: Common Criteria Protection Profile - Machine Readable Travel Document with „ICAO Application”, Extended Access Control (BSI-CC-PP0056) [PP0056] Product identification: cv act ePasslet Suite v2.1 TOE identification: cv act ePasslet Suite v2.1 – Java Card applet configuration providing Ma- chine Readable Travel Document with „ICAO Application”, Extended Access Control (EAC) Short TOE name: ePasslet2.1/MRTD-EACv1-BAC ROM identification value: “D4B949” or “784C6C”1 Javacard OS platform: NXP JCOP 2.4.2 R3 [ZertJCOP] Cryptographic library: [ZertCL] Security controller: [ZertIC] TOE documentation: Administration and user guide [Guidance] 1.2 ST overview This document contains the Security Target for MRTD chips based on the EAC application of the cv act ePassslet Suite. The cv act ePasslet Suite is a set of Javacard applications intended to be used exclusively on the NXP JCOP Javacard OS platforms, which are certified according to CC EAL 5+ [ZertJCOP]. The cv act ePasslet Suite as well as the NXP JCOP operating system are provided within the ROM mask of a smart card chip based on the NXP P5CD security controller, which is itself certified according to CC EAL 5+ [ZertIC], and certified cryptographic library [ZertCL]. This security target claims strict conformance to the Protection Profile Machine Readable Travel Document with “ICAO Application”, Extended Access Control (BSI-CC-PP0056) [PP0056]. The main objectives of this ST are:  to introduce TOE and the MRTD application,  to define the scope of the TOE and its security features,  to describe the security environment of the TOE, including the assets to be protected and the threats to be countered by the TOE and its environment during the product development, produc- tion and usage. 1 The cv act ePasslet Suite v2.1 is produced on one specific hardware (P5Cx145V0v, cf. [ZertIC]) that differs only with respect to the memory, interface configuration and the additional biometry provider (not used by the TOE and with non-interfering security functionality). The two different possible biometry providers lead to the two different ROM identification values. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 5 of 97  to describe the security objectives of the TOE and its environment supporting in terms of integrity and confidentiality of application data and programs and of protection of the TOE.  to specify the security requirements which includes the TOE security functional requirements, the TOE assurance requirements and TOE security functionalities. The assurance level for the TOE is CC EAL4 augmented with ALC_DVS.2 and AVA_VAN.5. 1.3 TOE overview 1.3.1 Overview of cv act ePasslet Suite cryptovision’s cv act ePasslet Suite is a set of Java Card applets for e-ID document applications built upon an underlying core library. The following Table 1 provides an overview of the individual applications included in cv act ePasslet Suite v2.1: Product / Application Specification Configuration ICAO MRTD application with Basic Access Con- trol (BAC) ICAO Doc 9303 ePasslet2.1/MRTD-BAC ICAO MRTD application with Basic and Supplemental Access Control (BAC/SAC) ICAO Doc 9303, TR03110v2.11 ePasslet2.1/MRTD-BAC- SAC ISO File System application ISO 7816 ePasslet2.1/ISO-FS International Driving License application with Basic Access Protection (BAP) ISO 18013 ePasslet2.1/IDL-Basic International Driving License application with Extended Access Protection (EAP) ISO 18013 ePasslet2.1/IDL-Extended ICAO MRTD application with Extended and Basic Access Control (EACv1-BAC) ICAO Doc 9303, TR03110v1.11 ePasslet2.1/MRTD-EACV1- BAC ICAO MRTD application with Extended and Supplemental Access Control (EACv1-SAC) ICAO Doc 9303, TR03110v1.11, TR03110v2.11 ePasslet2.1/MRTD-EACV1- SAC eID Document application with flexible access configuration (EACv2-SAC) ICAO Doc 9303, TR03110v2.11 ePasslet2.1/EACv2-SAC EU Electronic Vehicle Registration application EU Council Directive 1999/37/EC ePasslet2.1/eVR German eID Document application ICAO Doc 9303, TR03110v2.11, TR03127 ePasslet2.1/GeID ePKI application (Secure Signature Creation Device) ISO 7816, PKCS#15 ePasslet2.1/ePKI-SSCD European Citizen Card application CEN/TS 15480-2 ePasslet2.1/EuCC EU Electronic Residence Permit application TR03127 v1.15 ePasslet2.1/eRP EU Electronic Health Insurance application CWA 15974 ePasslet2.1/eHIC Table 1: Configurations of the cv act ePasslet Suite. These configurations are based on one or more predefined applets; different configurations might use the same underlying applet. While the whole applet code resides in ROM, the applets providing these different configurations are in- stantiated into EEPROM. Multiple configurations (and hence support for different applications) can be pre- cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 6 of 97 sent at the same time by instantiating multiple applets with their distinct configurations with some re- strictions detailed below. A common combination could be an ICAO MRTD applet and an ePKI applet provid- ing a travel application with LDS data and EAC authentication together with a signature application. The following configurations are certified according to Common Criteria:  configuration providing Machine Readable Travel Document with „ICAO Application”, Basic Access Control (BAC),  configuration providing Machine Readable Travel Document with „ICAO Application”, Extended Access Control (EAC),  configuration providing Machine Readable Travel Document with „ICAO Application”, Extended Access Control with PACE,  configuration providing Secure Signature Creation Device with key generation. Combinations of certified and non-certified applications are possible. Via configuration the instanciated applets can be tied to the contactless and/or the contact interface, re- spectively. 1.3.2 TOE definition The Target of Evaluation (TOE) is the contactless integrated circuit chip containing components for a machine readable travel document (MRTD chip). After instantiation and configuration of the ePasslet2.1/MRTD-EACv1-BAC configuration it can be programmed according to the Logical Data Structure (LDS) [ICAODoc] and providing the Basic Access Control and the Extended Access Control according to the ICAO document [ICAODoc] and the technical report [TR-03110]. The TOE consists of  the circuitry of the MRTD’s chip (the integrated circuit, IC) including the contact-based interface2 with hardware for the contactless interface including contacts for the antenna,  the platform with the Java Card operation system JCOP 2.4.2 R3 by NXP, in the variants o J3E120_M65, o J3E082_M65, o J2E120_M65, and o J2E082_M65.  cv act ePasslet Suite v2.1 – Java Card applet configuration providing Machine Readable Travel Doc- ument with „ICAO Application”, Extended Access Control,  the associated guidance documentation Administrator and User Guidance [Guidance]. The TOE’s functionality claimed by this Security Target is realized by the cv act ePasslet Suite in the MRTD- EACv1-BAC configuration only. Some of the underlying platform variants of this composite TOE provide MIFARE functionality; please note that this functionality is out of scope of the TOE’s security functionality claimed by this Security Target. 2 Please note that the MRTD’s chip itself (the integrated circuit, IC) is also equipped with a contact-based interface. ‘ePasslet Suite v2.1 – Java Card applet configuration providing Machine Readable Travel Docu- ment with „ICAO Application”, Extended Access Control’, is the only application that has access to the con- tactless interface. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 7 of 97 1.3.3 TOE usage and security features for operational use This paragraph is directly based on the corresponding paragraph in the protection profile [PP0056]. A state or organisation issues a MRTD to be used by the holder for international travel. The traveller pre- sents a MRTD to the inspection system to prove his or her identity. The MRTD in context of this security target contains (i) visual (eye readable) biographical data and portrait of the holder, (ii) a separate data summary (MRZ data) for visual and machine reading using OCR methods in the Machine readable zone (MRZ) and (iii) data elements on the MRTD’s chip according to LDS for con- tactless machine reading. The authentication of the traveller is based on (i) the possession of a valid MRTD personalized for a holder with the claimed identity as given on the biographical data page and (ii) biometrics using the reference data stored in the MRTD. The issuing state or organization ensures the authenticity of the data of genuine MRTD’s. The receiving state trusts a genuine MRTD of an issuing state or organization. Within this security target the MRTD is viewed as a unit of  the physical MRTD as travel document in form of paper, plastic and chip. It presents visual readable data including (but not limited to) personal data of the MRTD holder: (1) the biographical data on the biographical data page of the passport book, (2) the printed data in the Machine-Readable Zone (MRZ) and (3) the printed portrait.  the logical MRTD as data of the MRTD holder stored according to the Logical Data Structure [ICAO- Doc] as specified by ICAO on the contactless integrated circuit. Via the contactless interface of the integrated circuit, the following data including (but not limited to) personal data of the MRTD holder are accessible: (1) the digital Machine Readable Zone Data (digital MRZ data, EF.DG1), (2) the digitized portraits (EF.DG2), (3) the biometric reference data of finger(s) (EF.DG3) or iris image(s) (EF.DG4) or both2 (4) the other data according to LDS (EF.DG5 to EF.DG16) and (5) the document security object. The issuing State or Organization implements security features of the MRTD to maintain the authenticity and integrity of the MRTD and their data. The MRTD as the passport book and the MRTD’s chip is uniquely identified by the document number. The physical MRTD is protected by physical security measures (e.g. watermark on paper, security printing), logical (e.g. authentication keys of the MRTD’s chip) and organisational security measures (e.g. control of materials, personalization procedures). These security measures include the binding of the MRTD’s chip to the passport book. The logical MRTD is protected in authenticity and integrity by a digital signature created by the document signer acting for the issuing State or Organization and the security features of the MRTD’s chip. The ICAO defines the baseline security methods Passive Authentication and the optional advanced security methods Basic Access Control to the logical MRTD, Active Authentication of the MRTD’s chip, Extended Access Control to and the Data Encryption of additional biometrics as optional security measure in the ICAO Technical Report [ICAODoc]. The Passive Authentication Mechanism and the Data Encryption are performed completely and independently of the TOE by the TOE environment. This security target addresses the protection of the logical MRTD (i) in integrity by write-only-once access control and by physical means, and (ii) in confidentiality by the Basic Access Control Mechanism and the Extended Access Control Mechanism. This security target addresses the Chip Authentication described in [TR-03110] as an alternative to the Active Authentication stated in [ICAODoc]. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 8 of 97 The confidentiality by Basic Access Control is a mandatory security feature that shall be implemented by the TOE, too. Nevertheless this is not explicitly covered by this security target as there are known weak- nesses in the quality (i.e. entropy) of the BAC keys generated by the environment. Therefore, the MRTD has additionally to fulfill the ‘Common Criteria Protection Profile Machine Readable Travel Document with „ICAO Application", Basic Access Control’ [PP0055]. Due to the fact that [PP0055] does only consider ex- tended basic attack potential to the Basic Access Control Mechanism (i.e. AVA_VAN.3) the MRTD has to be evaluated and certified separately. The evaluation and certification process will be carried out simultane- ously to the current process according to the security target in hand. PP application note 1: As explained in the protection profile [PP0056] there is a separate Security Target for BAC [ST_BAC]. For BAC, the inspection system (i) reads optically the MRTD, (ii) authenticates itself as inspection system by means of Document Basic Access Keys. After successful authentication of the inspection system the MRTD’s chip provides read access to the logical MRTD by means of private communication (secure messaging) with this inspection system [ICAODoc], normative appendix 5. The security target requires the TOE to implement the Chip Authentication defined in [TR-03110]. The pro- tocol provides evidence of the MRTD’s chip authenticity and prevents data traces described in [ICAODoc], Annex G, section G.3.3. The Chip Authentication is provided by the following steps: (i) the inspection system communicates by means of secure messaging established by Basic Access Control, (ii) the inspection system reads and verifies by means of the Passive Authentication the authenticity of the MRTD’s Chip Authentica- tion Public Key using the Document Security Object, (iii) the inspection system generates a ephemeral key pair, (iv) the TOE and the inspection system agree on two session keys for secure messaging in ENC_MAC mode according to the Diffie-Hellman Primitive and (v) the inspection system verifies by means of received message authentication codes whether the MRTD’s chip was able or not to run this protocol properly (i.e. it could apply the Chip Authentication Private Key corresponding to the Chip Authentication Public Key for derivation of the session keys). The Chip Authentication requires collaboration of the TOE and the TOE en- vironment. The security target requires the TOE to implement the Extended Access Control as defined in [TR-03110]. The Extended Access Control consists of two parts (i) a Terminal Authentication Protocol to authenticate the inspection system as entity authorized by the Issuing State or Organization through the receiving State, and (ii) an access control by the TOE to allow reading the sensitive biometric reference data only to success- fully authenticated authorized inspection systems. It requires the Chip Authentication of the MRTD’s chip to the inspection system and uses the secure messaging established by the Chip Authentication Mechanism to protect the confidentiality and integrity of the sensitive biometric reference data during their transmis- sion from the TOE to the inspection system. The issuing State or Organization authorizes the receiving State by means of certification the authentication public keys of Document Verifiers who create Inspection Sys- tem Certificates. 1.3.4 Major security features of the TOE The TOE provides the following TOE security functionalities:  TSF_Access manages the access to objects (files, directories, data and secrets) stored in the applet’s file system. It also controls write access of initialization, pre-personalization and personalization data.  TSF_Admin manages the storage of manufacturing data, pre-personalization data and personaliza- tion data.  TSF_Secret ensures secure management of secrets such as cryptographic keys. This covers secure key storage, access to keys as well as secure key deletion. These mechanisms are mainly provided by TSF_OS. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 9 of 97  TSF_Crypto performs high level cryptographic operations. The implementation is mainly based on the Security Functionalities provided by TSF_OS. The supported crypto mechanisms are: o the Diffie-Hellman key derivation Protocol with cryptographic key sizes between 1976 and 2048 bit, and ECDH compliant to ISO 15946 with cryptographic key sizes of 256 and 320 bit with specified elliptic curves, o digital signature verification in accordance with ECDSA and cryptographic key sizes of 160, 192, 224, 256 and 320 bit (with defined domain parameters), o Terminal Authentication Protocol, Secure messaging in MAC-ENC mode, and Symmetric Au- thentication Mechanism based on AES. o Active Authentication with RSA and with cryptographic key sizes between 1976 and 2048 bit.  TSF_SecureMessaging realizes a secure communication channel with MACs and encryption based on AES (128, 192 and 256 bit key length).  TSF_Auth realizes different authentication mechanisms: TSF_Auth_Term (Terminal Authentication), TSF_Auth_Sym used for BAC and symmetric authentication based on pre-shared keys used for per- sonalization, TSF_Auth_Chip to manage the capability of the TOE to authenticate itself to the ter- minal using the Chip Authentication Protocol (EAC) and the optional TSF_Auth_AA for Active Au- thentication.  TSF_Integrity protects the integrity of internal applet data like the Access control lists.  TSF_OS contains all security functionalities provided by the certified platform (IC, crypto library, Javacard operation system). Besides some minor additions, the cryptographic operations are pro- vided by this platform. 1.3.5 TOE life cycle The TOE life cycle is described in terms of the four life cycle phases. This paragraph is directly based on the corresponding paragraph in the protection profile [PP0056]. 1.3.5.1 Phase 1: Development (Step 1) The TOE is developed in phase 1. The IC developer develops the integrated circuit, the IC Dedicated Software and the guidance documentation associated with these TOE components. (Step 2) The software developer3 uses the guidance documentation for the integrated circuit and the guid- ance documentation for relevant parts of the IC Dedicated Software and develops the IC Embedded Soft- ware (operating system), the MRTD application and the guidance documentation associated with these TOE components. The manufacturing documentation of the IC including the IC Dedicated Software and the Embedded Soft- ware in the non-volatile non-programmable memories (ROM) is securely delivered to the IC manufacturer. The IC Embedded Software in the nonvolatile programmable memories, the MRTD application, the initiali- sation data and the guidance documentation is securely delivered to the MRTD manufacturer. 1.3.5.2 Phase 2: Manufacturing (Step 3) In a first step the TOE integrated circuit is produced containing the MRTD’s chip Dedicated Software and the parts of the MRTD’s chip Embedded Software in the nonvolatile non-programmable memories 3 Please note that in this ST the role software developer of the protection profile is subdivided into two separate roles: the operating system is developed by the OS software developer, and the MRTD application by the (MRTD) software developer. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 10 of 97 (ROM). The IC manufacturer writes the IC Identification Data onto the chip to control the IC as MRTD mate- rial during the IC manufacturing and the delivery process to the MRTD manufacturer. The IC is securely delivered from the IC manufacturer to the MRTD manufacturer. The TOE delivery according to CC is the delivery of the IC (with the application code in ROM) from the IC manufacturer to the MRTD manufacturer. If necessary the IC manufacturer adds the parts of the IC Embedded Software in the non-volatile program- mable memories (for instance EEPROM). (Step 4) The MRTD manufacturer combines the IC with hardware for the contactless interface in the pass- port book. (Step 5) The MRTD manufacturer (i) creates the MRTD application and (ii) equips MRTD’s chips with pre- personalization Data. PP application note 2: Creation of the application implies applet instantiation. In this step the final (but not yet personalized) MRTD is generated from the certified components accord- ing to the binding initialization and pre-personalization guidelines provided in [Guidance]. The pre-personalized MRTD together with the IC Identifier is securely delivered from the MRTD manufac- turer to the Personalization Agent. The MRTD manufacturer also provides the relevant parts of the guidance documentation to the Personalization Agent. 1.3.5.3 Phase 3: Personalisation of the MRTD (Step 6) The personalization of the MRTD includes (i) the survey of the MRTD holder biographical data, (ii) the enrolment of the MRTD holder biometric reference data (i.e. the digitized portraits and the optional biometric reference data), (iii) the printing of the visual readable data onto the physical MRTD and their secure transfer to the personalisation agent, (iv) the writing of the TOE User Data and TSF Data into the logical MRTD and (v) the writing the TSF Data into the logical MRTD and configuration of the TSF if necessary. The step (iv) is performed by the Personalisation Agent and includes but is not limited to the creation of (i) the digital MRZ data (DG1), (ii) the digitised portrait (DG2), and (iii) the Document security object. The signing of the Document security object by the Document signer [ICAODoc] finalizes the personalization of the genuine MRTD for the MRTD holder. The personalized MRTD (together with appropriate guidance for TOE use if necessary) is handed over to the MRTD holder for operational use. PP application note 3: PP application note 4: As in the PP this ST distinguishes between the roles „personalization agent“ and „doument signer“ 1.3.5.4 Phase 4: Operational use (Step 7) The TOE is used as MRTD’s chip by the traveller and the inspection systems in the “Operational Use” phase. The user data can be read according to the security policy of the Issuing State or Organization and used according to the security policy of the Issuing State but they can never be modified. PP application note 5: The authorized Personalization Agents might be allowed to add (not to modify) data in the other data groups of the MRTD application (e.g. person(s) to notify EF.DG16) in the Phase 4 “Opera- tional Use”. This will imply an update of the Document Security Object including the re-signing by the Doc- ument Signer. PP application note 6: The intention of the underlying PP [PP0056] is to consider at least the phases 1 and parts of phase 2 (i.e. Step1 to Step3) as part of the evaluation and therefore to define the TOE delivery according to CC after this phase. Since specific production steps of phase 2 are of minor security relevance (e. g. booklet manufacturing and antenna integration) these are not part of the CC evaluation under ALC. Nevertheless the decision about this has to be taken by the certification body resp. the national body of the issuing State or Organization. In this case the national body of the issuing State or Organization is responsi- ble for these specific production steps. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 11 of 97 Note that the personalization process and its environment may depend on specific security needs of an issuing State or Organization. All production, generation and installation procedures after TOE delivery up to the “Operational Use” (phase 4) have to be considered in the product evaluation process under AGD assurance class. Remark: This ST considers only phase 1 and parts of phase 2 (steps 1 - 3) as part of CC evaluation under ALC. 1.3.6 Non-TOE hardware/software/firmware required by the TOE There is no explicit non-TOE hardware, software or firmware required by the TOE to perform its claimed security features. The TOE is defined to comprise the chip and the complete operating system and applica- tion. Note, the inlay holding the chip as well as the antenna and the booklet (holding the printed MRZ) are needed to represent a complete MRTD, nevertheless these parts are not inevitable for the secure operation of the TOE. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 12 of 97 2 Conformance claims 2.1 CC conformance This security target claims conformance to:  Common Criteria for Information Technology Security Evaluation, Part 1: Introduction and General Model; Version 3.1, Revision 4, September 2012; CCMB-2012-09-001, [CC_1],  Common Criteria for Information Technology Security Evaluation, Part 2: Security Functional Re- quirements; Version 3.1, Revision 4, September 2012; CCMB-2012-09-002, [CC_2],  Common Criteria for Information Technology Security Evaluation, Part 3: Security Assurance Re- quirements; Version 3.1, Revision 4, September 2012; CCMB-2012-09-003, [CC_3], as follows:  Part 2 extended,  Part 3 conformant,  Package conformant to EAL4 augmented with ALC_DVS.2 and AVA_VAN.5 defined in CC part 3 [CC_3]. The  Common Methodology for Information Technology Security Evaluation, Evaluation Methodol- ogy; Version 3.1, Revision 4, September 2012; CCMB-2012-09-004, [CC_4] has to be taken into account. This security target claims strict conformance to the Protection Profile Machine Readable Travel Document with “ICAO Application”, Extended Access Control (BSI-CC-PP0056) [PP0056]4. The evaluation of the TOE uses the result of the CC evaluation of the chip platform claiming conformance to the PP [PP_Javacard]. The hardware part of the composite evaluation is covered by the certification re- port [ZertIC]. In addition, the evaluation of the TOE uses the result of the CC evaluation of the crypto library and the JCOP 2.4.2 R3 Javacard OS. The Javacard OS part of the composite evaluation is covered by the certification reports [ZertJCOP], the crypto library by the certification reports [ZertCL]. PP application note 7: . 2.2 Statement of Compatibility concerning Composite Security Target 2.2.1 Assessment of the Platform TSFs The following table lists all Security Functionalities of the underlying Platform ST and shows, which Security Functionalities of the Platform ST are relevant for this Composite ST and which are irrelevant. The first col- umn addresses specific Security Functionality of the underlying platform, which is assigned to Security Func- tionalities of the Composite ST in the second column. The last column provides additional information on the correspondence if necessary. 4 PP Application Note 7: information only – no action required cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 13 of 97 Platform TSF-group Correspondence in this ST References/Remarks SF.AccessControl TSF_Access SF.Audit TSF_Admin SF.CryptoKey TSF_Secret SF.CryptoOperation TSF_Crypto SF.I&A TSF_Access SF.SecureManagement TSF_Admin, TSF_Integrity SF.PIN - This platform TSF focuses on PIN au- thentication, which is irrelevant for this ST (an EAC passport uses no PINs). For other configurations of ePasslet Suite, the corresponding TSF is TSF_Access. SF.LoadIntegrity - This platform TSF ensures the origin and the integrity of a received pack- age. This is not corresponding to any TSF of the TOE. Security measures for the loading of additional applets are not in the scope of this ST, but are in the responsibility of the card issuer. SF.Transaction TSF_Integrity SF.Hardware TSF_OS Implicitly used via JCOP (TSF_OS)* SF.CryptoLib TSF_OS Implicitly used via JCOP (TSF_OS)* Table 2: Relevant platform TSF-groups and their correspondence * Remark: The Platform TSF-groups “SF.Hardware” and “SF.CryptoLib” are not directly used by Security Functionalities of the TOE, they are (implicitly) invoked by calls to the JCOP operating system, though. These OS calls are grouped in the TSF_OS. 2.2.2 Assessment of the Platform SFRs The following table provides an assessment of all relevant Platform SFRs. The Platform SFRs are listed in the order used within the security target of the platform [ST_JCOP]. Platform SFR Correspondence in this ST References/Remarks CoreG_LC Security Functional Requirements (chapter 6.1 in platform ST) Firewall Policy (chapter 6.1.1 in platform ST) FDP_ACC.2/FIREWALL No correspondence Out of scope (internal Java Card Fire- wall). The resulting requirements for applets are reflected in the User Guidance of the TOE. No contradic- tion to this ST. FDP_ACF.1/FIREWALL No correspondence Out of scope (internal Java Card Fire- wall). The resulting requirements for applets are reflected in the User cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 14 of 97 Platform SFR Correspondence in this ST References/Remarks Guidance of the TOE. No contradic- tion to this ST. FDP_IFC.1/JCVM No correspondence Out of scope (internal Java Virtual Machine). No contradiction to this ST. FDP_IFF.1/JCVM No correspondence Out of scope (internal Java Virtual Machine). No contradiction to this ST. FDP_RIP.1/OBJECTS No correspondence. Out of scope (internal Java Card Fire- wall). No contradiction to this ST. FMT_MSA.1/JCRE No correspondence Out of scope (internal Java Card Fire- wall). No contradiction to this ST. FMT_MSA.1/JCVM No correspondence Out of scope (internal Java Card Fire- wall). No contradiction to this ST. FMT_MSA.2/FIREWALL_JCVM No correspondence Out of scope (internal Java Card Fire- wall). The resulting requirements for applets are reflected in the User Guidance of the TOE. No contradic- tion to this ST. FMT_MSA.3/FIREWALL No correspondence Out of scope (internal Java Card Fire- wall). The resulting requirements for applets are reflected in the User Guidance of the TOE. No contradic- tion to this ST. FMT_MSA.3/JCVM No correspondence Out of scope (internal Java Card Fire- wall). No contradiction to this ST. FMT_SMF.1 No correspondence Out of scope (internal Java Card Fire- wall). No contradiction to this ST. FMT_SMR.1 No correspondence Out of scope (internal Java Card Fire- wall). No contradiction to this ST. Application Programming Interface (chapter 6.1.2 in platform ST) FCS_CKM.1 No correspondence FCS_CKM.1 of this ST is only focussing on Diffie-Hellman- or ECDH key agreement. FCS_CKM.2 No correspondence Out of scope (managed within JCOP). No contradiction to this ST. FCS_CKM.3 No correspondence Out of scope (managed within JCOP). No contradiction to this ST. FCS_CKM.4 FCS_CKM.4 The requirements are equivalent (physically overwriting the keys with zeros). FCS_COP.1 (FCS_COP.1.1/TripleDES, FCS_COP.1.1/AES, FCS_COP.1/SHA, FCS_COP.1/SYM, FCS_COP.1/MAC, FCS_COP.1/SIG_VER The requirements are equivalent: FCS_COP.1/SHA of this ST corre- sponds to the platform SFR FCS_COP.1/SHA-1, FCS_COP.1/SHA- cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 15 of 97 Platform SFR Correspondence in this ST References/Remarks FCS_COP.1.1/RSACipher, FCS_COP.1.1/ RSASigna- turePKCS#1, FCS_COP.1.1/ RSASignaturePKCS#1_PSS, FCS_COP.1.1/ RSASigna- tureISO9796, FCS_COP.1.1/ DHKeyExchange, FCS_COP.1.1/ DESMAC, FCS_COP.1.1/ AESMAC, FCS_COP.1.1/ ECSignature, FCS_COP.1.1/ ECAdd, FCS_COP.1.1/SHA-1, FCS_COP.1.1/ SHA-224, FCS_COP.1.1/ SHA-256, FCS_COP.1.1/ AES_CMAC, FCS_COP.1.1/ TDES_CMAC) 224 and FCS_COP.1/SHA-256; FCS_COP.1/SYM corresponds to the platform SFR FCS_COP.1/AES; FCS_COP.1/MAC corresponds to the platform SFR FCS_COP.1/AES_CMAC; FCS_COP.1/SIG_VER corresponds to the platform SFR FCS_COP.1/RSASignaturePKCS#1. No contradiction to this ST. FDP_RIP.1/ABORT No correspondence. Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_RIP.1/APDU No correspondence. Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_RIP.1/bArray No correspondence. Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_RIP.1/KEYS No correspondence. Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_RIP.1/TRANSIENT No correspondence. Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_ROL.1/FIREWALL No correspondence. Out of scope (internal Java Card Fire- wall). The resulting requirements for applets are reflected in the User Guidance of the TOE. No contradic- tion to this ST. Card Security Management (chapter 6.1.3 in platform ST) FAU_ARP.1 FPT_FLS.1, FPT_PHP.3 Not directly corresponding, but plat- form SFR is basis of fulfillment of FPT_FLS.1 and FPT_PHP.3. Internal counter for security violations com- plement JCOP mechanisms- No con- tradiction to this ST. FDP_SDI.2 FPT_FLS.1, FPT_PHP.3 Not directly corresponding, but plat- form SFR is basis of fulfillment of FPT_FLS.1 and FPT_PHP.3. No con- tradiction to this ST. FPR_UNO.1 No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FPT_FLS.1 FPT_FLS.1 The fulfillment of the platform SFR is part of the basis of the fulfillment of cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 16 of 97 Platform SFR Correspondence in this ST References/Remarks the SFR of this ST. Internal counter- measures for detecting security vio- lations complement JCOP mecha- nisms. No contradiction to this ST. FPT_TDC.1 No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. Aid Management (chapter 6.1.4 in platform ST) FIA_ATD.1/AID No correspondence. Out of scope (internal Java Card func- tionality). No contradiction to this ST. FIA_UID.2/AID No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FIA_USB.1/AID No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MTD.1/JCRE No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MTD.3/JCRE No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. INSTG Security Functional Requirements (chapter 6.1.5 in platform ST) This group consists of the SFRs related to the installation of the applets, which addresses security aspects outside the runtime. FDP_ITC.2/Installer No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_SMR.1/Installer No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FPT_FLS.1/Installer No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FPT_RCV.3/Installer No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. ADELG Security Functional Requirements (chapter 6.1.6 in platform ST) This group consists of the SFRs related to the deletion of applets and/or packages, enforcing the applet deletion manager (ADEL) policy on security aspects outside the runtime. FDP_ACC.2/ADEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_ACF.1/ADEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_RIP.1/ADEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.1/ADEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.3/ADEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_SMF.1/ADEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 17 of 97 Platform SFR Correspondence in this ST References/Remarks FMT_SMR.1/ADEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FPT_FLS.1/ADEL FPT_FLS.1 The fulfillment of the platform SFR is part of the basis of the fulfillment of the SFR of this ST. Internal counter- measures for detecting security vio- lations complement JCOP mecha- nisms. No contradiction to this ST. RMIG Security Functional Requirements (chapter 6.1.7 in platform ST) This group specifies the policies that control the access to the remote objects and the flow of information that takes place when the RMI service is used. FDP_ACC.2/JCRMI No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_ACF.1/JCRMI No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. ODELG Security Functional Requirements (chapter 6.1.8 in platform ST) The following requirements concern the object deletion mechanism. This mechanism is triggered by the applet that owns the deleted objects by invoking a specific API method. FDP_RIP.1/ODEL No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FPT_FLS.1/ODEL FPT_FLS.1 The fulfillment of the platform SFR is part of the basis of the fulfillment of the SFR of this ST. Internal counter- measures for detecting security vio- lations complement JCOP mecha- nisms. No contradiction to this ST. CARG Security Functional Requirements (chapter 6.1.9 in platform ST) This group includes requirements for preventing the installation of packages that has not been bytecode verified, or that has been modified after bytecode verification. FCO_NRO.2/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_IFC.2/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_IFF.1/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_UIT.1/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FIA_UID.1/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.1/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.3/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 18 of 97 Platform SFR Correspondence in this ST References/Remarks FMT_SMF.1/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_SMR.1/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FTP_ITC.1/CM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. EMG Security Functional Requirements (chapter 6.1.10 in platform ST) This group includes requirements for managing the external memory. FDP_ACC.1/EXT_MEM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_ACF.1/EXT_MEM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.1/EXT_MEM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.3/EXT_MEM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_SMF.1/EXT_MEM No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. Further Functional Requirements not contained in the PP (chapter 6.1.11 in platform ST) SCPG Security Functional Requirements (chapter 6.1.12 in platform ST) For the Java card platform evaluation the smart card platform belongs to the TOE and the requirements are stated in the ST as functional requirements for the TOE. FPT_FLS.1/SCP FPT_FLS.1 The fulfillment of the platform SFR is part of the basis of the fulfillment of the SFR of this ST. FRU_FLT.2/SCP No correspondence Out of scope (platform functionality). No contradiction to this ST. FPT_PHP.3/SCP FPT_PHP.3 The fulfillment of the SFR in this ST is based on the platform SFR. No con- tradiction to this ST. FDP_ACC.1/SCP No correspondence Out of scope (platform functionality). No contradiction to this ST. FDP_ACF.1/SCP No correspondence Out of scope (platform functionality). No contradiction to this ST. FMT_MSA.3/SCP No correspondence Out of scope (platform functionality). No contradiction to this ST. LifeCycle Security Functional Requirements (chapter 6.1.13 in platform ST) This group contains the security requirements for life cycle control mechanism . FDP_ACC.1/LifeCycle No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_ACF.1/LifeCycle No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 19 of 97 Platform SFR Correspondence in this ST References/Remarks FMT_MSA.1/LifeCycle No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.3/LifeCycle No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. Further Functional Requirements (chapter 6.1.14 in platform ST) FIA_AFL.1/PIN No correspondence Out of scope (PINs are not used within a EAC passport). No contradic- tion to this ST. FTP_ITC.1/ LifeCycle No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FAU_SAS.1/SCP FAU_SAS.1 Fulfillment of the platform SFR leads directly to the SFR of this ST. FCS_RNG.1 FCS_RND.1 In this ST, random numbers accord- ing to AIS20 class DRG3 are required. The platform generates random numbers with a defined quality met- ric that can be used directly. FCS_RNG.1/RNG2 No correspondence This ST requires random numbers ac- cording to AIS20 class DRG.3; thus, this platform SFR with an optional DRG.2 random generator mode has no direct correspondence. FPT_EMSEC.1 FPT_EMSEC.1 The fulfillment of the SFR in this ST is based on the platform SFR (together with additional countermeasures). Functional Requirements for the Secure Box This group contains the functional requirements for the Secure Box which is part of the TOE. FDP_ACC.2/SecureBox No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FDP_ACF.1/SecureBox No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.3/SecureBox No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_MSA.1/SecureBox No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. FMT_SMF.1/SecureBox No correspondence Out of scope (internal Java Card func- tionality). No contradiction to this ST. Table 3: Relevant platform SFRs and their correspondence 2.2.3 Assessment of the Platform Objectives The following table provides an assessment of all relevant Platform objectives. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 20 of 97 Platform Objective Correspondence in this ST References/Remarks OT.SEC_BOX_FW No correspondence Out of scope. No contradiction to this ST. OT.IDENTIFICATION OT.Identification No contradiction to this ST. OT.RND No correspondence Indirectly relevant for the correct function of the TOE of this ST, but no corresponding objectives for the TOE of this ST. No contradictions. OT.MF_FW No correspondence Out of scope. No contradiction to this ST. OT.SID No correspondence Out of scope. No contradiction to this ST. OT.FIREWALL No correspondence Out of scope. No contradiction to this ST. OT.GLOBAL_ARRAYS_CONFID OT.Sens_Data_Conf No contradiction to this ST. OT.GLOBAL_ARRAYS_INTEG OT.Data_Int No contradiction to this ST. OT.NATIVE No correspondence Out of scope. No contradiction to this ST. OT.OPERATE No correspondence Out of scope. No contradiction to this ST. OT.REALLOCATION No correspondence Out of scope. No contradiction to this ST. OT.RESOURCES No correspondence Out of scope. No contradiction to this ST. OT.ALARM No correspondence Out of scope. No contradiction to this ST. OT.CIPHER No correspondence Indirectly relevant for the correct function of the TOE of this ST, but no corresponding objectives for the TOE of this ST. No contradictions. OT.KEY-MNGT No correspondence Out of scope. No contradiction to this ST. OT.PIN-MNGT No correspondence Out of scope. No contradiction to this ST. OT.REMOTE No correspondence Out of scope. No contradiction to this ST. OT.TRANSACTION No correspondence Out of scope. No contradiction to this ST. OT.OBJ-DELETION No correspondence Out of scope. No contradiction to this ST. OT.DELETION No correspondence Out of scope. No contradiction to this ST. OT.LOAD No correspondence Out of scope. No contradiction to this ST. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 21 of 97 Platform Objective Correspondence in this ST References/Remarks OT.INSTALL No correspondence Out of scope. No contradiction to this ST. OT.CARD-MANAGEMENT No correspondence Out of scope. No contradiction to this ST. OT.SCP.IC OT.Prot_Phys-Tamper The objectives are related. No con- tradiction to this ST. OT.SCP.RECOVERY OT.Prot_Malfunction The objectives are related. No con- tradiction to this ST. OT.SCP.SUPPORT No correspondence Out of scope. No contradiction to this ST. OT.EXT-MEM No correspondence Out of scope. No contradiction to this ST. Table 4: Platform objectives and their correspondence 2.2.4 Assessment of Platform Threats The following table provides an assessment of all relevant Platform objectives. Platform Threat Correspondence in this ST References/Remarks T.OS_OPERATE No correspondence Out of scope. No contradiction to this ST. T.SEC_BOX_BORDER No correspondence Out of scope. No contradiction to this ST. T.RND No correspondence Out of scope. No contradiction to this ST. T.CONFID-APPLI-DATA T.Read_Sensitive_Data T.Information_Leakage No contradiction to this ST. T.CONFID-JCS-CODE No correspondence Out of scope. No contradiction to this ST. T.CONFID-JCS-DATA T.Information_Leakage No contradiction to this ST. T.INTEG-APPLI-CODE No correspondence Out of scope. No contradiction to this ST. T.INTEG-APPLI-CODE.LOAD No correspondence Out of scope. No contradiction to this ST. T.INTEG-APPLI-DATA T.Forgery No contradiction to this ST. T.INTEG-APPLI-DATA.LOAD No correspondence Out of scope. No contradiction to this ST. T.INTEG-JCS-CODE No correspondence Out of scope. No contradiction to this ST. T.INTEG-JCS-DATA No correspondence Out of scope. No contradiction to this ST. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 22 of 97 Platform Threat Correspondence in this ST References/Remarks T.SID.1 No correspondence Out of scope. No contradiction to this ST. T.SID.2 No correspondence Out of scope. No contradiction to this ST. T.EXE-CODE.1 No correspondence Out of scope. No contradiction to this ST. T.EXE-CODE.2 No correspondence Out of scope. No contradiction to this ST. T.EXE-CODE-REMOTE No correspondence Out of scope. No contradiction to this ST. T.NATIVE No correspondence Out of scope. No contradiction to this ST. T.RESOURCES No correspondence Out of scope. No contradiction to this ST. T.DELETION No correspondence Out of scope. No contradiction to this ST. T.INSTALL No correspondence Out of scope. No contradiction to this ST. T.OBJ-DELETION No correspondence Out of scope. No contradiction to this ST. T.PHYSICAL T.Phys-Tamper No contradiction to this ST. Table 5: Platform threats and their correspondence 2.2.5 Assessment of Platform Organisational Security Policies The platform ST contains the Organisational Security Policy “OSP.PROCESS-TOE” referring to accurate iden- tification of each TOE instance. This policy will be fulfilled by a distinct product code for the platform and for the composite TOE each. This policy does not contradict to the policies of this ST. The other Organisa- tional Security Policy “OSP.VERIFICATION” focuses on the integrity of loaded applets, which is fulfilled by the TOE of this ST since the applet is loaded from ROM only. 2.2.6 Assessment of Platform Operational Environment 2.2.6.1 Assessment of Platform Assumptions In the first column, the following table lists all significant assumptions of the Platform ST. The last column provides an explanation of relevance for the Composite TOE. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 23 of 97 Significant Platform Assumption Relevance for Composite ST A.APPLET A.APPLET states that applets loaded post-issuance do not contain na- tive methods. This assumption leads to appropriate directives in the user guidance [Guidance]. A.VERIFICATION This assumption targets the applet code verification. In the context of this ST the applet is loaded from ROM only and was verified before ROM mask production. Regarding post-issuance loading of third party applets, this assumption leads to appropriate directives in the user guidance [Guidance]. A.USE_DIAG A.USE_DIAG is required in the Platform ST to cover secure communi- cation during packaging, finishing and personalisation. This is corre- sponding to OT.Data_Int of this composite ST. A.USE_KEYS During Operational use, this assumption icorresponds to A.Insp-Sys. Regarding the packaging, finishing and personalisation phase, this as- sumption is corresponding to A.MRTD_Manufact and A.Pers_Agent of this ST. There are no contradictions in the assumptions. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 24 of 97 A.PPROCESS-SEC-IC This assumption focuses on the security of the production process af- ter chip delivery; this is also targeted by A.MRTD_Manufact, A.MRTD_Delivery and A.Pers_Agent of this ST. A.PPROCESS-SEC-IC of the platform ST states that it is assumed that security procedures are used after delivery of the TOE by the TOE Manufacturer up to delivery to the end consumer to maintain confi- dentiality and integrity of the TOE and of its manufacturing and test data (to prevent any possible copy, modification, retention, theft or unauthorised use). This means that the Phases after TOE Delivery are assumed to be protected appropriately. The assets to be protected are: - the Security IC Embedded Software including specifications, imple- mentation and related documentation, - pre-personalisation and personalisation data including specifications of formats and memory areas, test related data, - the User Data and related documentation, and - material for software development support as long as they are not under the control of the TOE Manufacturer. Within this ST, it is assumed that  A.MRTD_Manufact: Appropriate functionality testing of the MRTD is used. It is assumed that security procedures are used during all manufacturing and test operations to maintain con- fidentiality and integrity of the MRTD and of its manufactur- ing and test data (to prevent any possible copy, modification, retention, theft or unauthorized use).  A.MRTD_Delivery: Procedures shall guarantee the control of the TOE delivery and storage process and conformance to its objectives: (1) procedures shall ensure protection of TOE ma- terial/information under delivery and storage, (2) procedures shall ensure that corrective actions are taken in case of im- proper operation in the delivery process and storage, and (3) procedures shall ensure that people dealing with the proce- dure for delivery have got the required skill. In addition, A. Pers_Agent assumes the correctness of the data and keys on the final MRTD’s chip. Thus, the main aspects of A.PPROCESS-SEC-IC are also addressed by the assumptions in this ST, and there are no contradictions in the as- sumptions. Table 6: Assumptions of the Platform ST. 2.2.6.2 Assessment of Platform Security Objectives and SFRs for the Operational Environment There are the following significant Platform Security Objectives for the Operational Environment that have to be considered. Significant Platform Objective for the Environment Relevance for Composite ST cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 25 of 97 OE.APPLET The platform objective for the environment states that applets loaded post-issuance do not contain native methods. This assumption leads to appro- priate directives in the user guidance [Guidance]. OE.VERIFICATION According to the document [JIL_1], the correspond- ing objective for the environment in [Guidance] is extended to the following: OE.VERIFICATION All the bytecodes shall be verified at least once, be- fore the loading, before the installation or before the execution, depending on the card capabilities, in or- der to ensure that each bytecode is valid at execu- tion time. Additionally, the applet shall follow all the recom- mendations, if any, mandated in the platform guid- ance for maintaining the isolation property of the platform. The platform objective for the environment tar- gets the applet code verification. In the context of this ST the TOE applet code is loaded from ROM only and was verified before ROM mask produc- tion. Regarding post-issuance loading of third party applets, this objective for the environment leads to appropriate directives in the user guid- ance [Guidance]. There it is stated that all applets loaded to the TOE have to be verified. OE.USE_DIAG The platform objective for the environment covers secure communication during packaging, finishing and personalisation. This is corresponding to OT.Data_Int of this composite ST. OE.USE_KEYS The platform objective for the environment is cor- responding to OE.MRTD_Manufact of this ST re- garding the packaging, finishing and personalisa- tion phase. OE.PROCESS_SEC_IC OE.MRTD_Manufact states that during all manu- facturing and test operations, security procedures shall be used through phases 4, 5 and 6 to main- tain confidentiality and integrity of the TOE and its manufacturing and test data. OE.MRTD_ Delivery states that procedures shall ensure protection of TOE material/information under delivery including the following objectives:  non-disclosure of any security relevant in- formation,  identification of the element under deliv- ery,  meet confidentiality rules (confidentiality level, transmittal form, reception ac- knowledgment),  physical protection to prevent external damage,  secure storage and handling procedures,  traceability of TOE during delivery includ- ing the following parameters: cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 26 of 97 o origin and shipment details, o reception, reception acknowl- edgement, o location material/information. The objectives for the environment include also corrective actions in case of improper operation in the delivery process and that people dealing with the procedure for delivery have got the required skill, training and knowledge to meet the proce- dure requirements. Thus, these two objectives are in-line with the platform objective OE.PROCESS_SEC_IC. There is no contradiction to the platform objective. According to the document [JIL_1], an additional ob- jective for the environment is necessary for an open and isolating platform: OE.CODE-EVIDENCE For application code loaded pre-issuance, evaluat- ed technical measures implemented by the TOE or audited organizational measures must ensure that loaded application has not been changed since the code verifications required in OE.VERIFICATION. For application code loaded post-issuance and veri- fied off-card according to the requirements of OE.VERIFICATION, the verification authority shall provide digital evidence to the TOE that the appli- cation code has not been modified after the code verification and that he is the actor who per-formed code verification. For application code loaded post-issuance and par- tially or entirely verified on-card, technical measures must ensure that the verification re-quired in OE.VERIFICATION are performed. On-card bytecode verifier is out of the scope of this Protection Profile. Application Note: The technical measure to fulfill OE.VERIFICATION is the bytecode verifier provided by the Java card OS manufacturer. For application code loaded pre-issuance, organizational measures must ensure that a loaded application has not been changed since the code verification. For application code loaded post-issuance, the verification author- ity shall provide digital evidence that the application code has not been modified after the code verifica- tion and that he is the actor who performed code verification. This can be achieved by electronic sig- nature of the application code, after code verifica- tion, by the actor who performed verification. This objective for the environment is relevant, since it targets additional applets loaded to the TOE. Thus it leads to an appropriate objective for the environment in the user guidance [Guidance]. Table 7: Platform Security Objectives and SFRs for the Operational Environment cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 27 of 97 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 28 of 97 3 Security problem definition This chapter has been taken from [PP0056] with minor modifications. 3.1 Introduction 3.1.1 Assets The assets to be protected by the TOE include the User Data on the MRTD’s chip. 3.1.1.1 Logical MRTD sensitive User Data Sensitive biometric reference data (EF.DG3, EF.DG4). PP application note 8: Due to interoperability reasons the ‘ICAO Doc 9303’ [ICAODoc] requires that Basic Inspection Systems must have access to logical MRTD data DG1, DG2, DG5 to DG16. Note the BAC mecha- nisms may not resist attacks with high attack potential (cf. [PP0055]). 3.1.1.2 Authenticity of the MRTD’s chip The authenticity of the MRTD’s chip personalized by the issuing State or Organization for the MRTD holder is used by the traveler to prove his possession of a genuine MRTD. 3.1.2 Subjects This security target considers the following subjects: 3.1.2.1 Manufacturer The generic term for the IC Manufacturer producing the integrated circuit and the MRTD Manufacturer completing the IC to the MRTD’s chip. The Manufacturer is the default user of the TOE during the Phase 2 Manufacturing. The TOE does not distinguish between the users IC Manufacturer and MRTD Manufacturer using this role Manufacturer. 3.1.2.2 Personalization Agent The agent is acting on behalf of the issuing State or Organization to personalize the MRTD for the holder by some or all of the following activities: (i) establishing the identity of the holder for the biographic data in the MRTD, (ii) enrolling the biometric reference data of the MRTD holder i.e. the portrait, the encoded finger image(s) and/or the encoded iris image(s), (iii) writing these data on the physical and logical MRTD for the holder as defined for global, international and national interoperability, (iv) writing the initial TSF data and (v) signing the Document Security Object. 3.1.2.3 Country Verifying Certification Authority The Country Verifying Certification Authority (CVCA) enforces the privacy policy of the issuing State or Or- ganization with respect to the protection of sensitive biometric reference data stored in the MRTD. The CVCA represents the country specific root of the PKI of Inspection Systems and creates the Document Ver- ifier Certificates within this PKI. The updates of the public key of the CVCA are distributed in the form of Country Verifying CA Link-Certificates. 3.1.2.4 Document Verifier The Document Verifier (DV) enforces the privacy policy of the receiving State with respect to the protection of sensitive biometric reference data to be handled by the Extended Inspection Systems. The Document Verifier manages the authorization of the Extended Inspection Systems for the sensitive data of the MRTD cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 29 of 97 in the limits provided by the issuing States or Organizations in the form of the Document Verifier Certifi- cates. 3.1.2.5 Terminal A terminal is any technical system communicating with the TOE through the contactless interface. 3.1.2.6 Inspection system (IS) A technical system used by the border control officer of the receiving State (i) examining an MRTD presented by the traveler and verifying its authenticity and (ii) verifying the traveler as MRTD holder. The Basic Inspec- tion System (BIS) (i) contains a terminal for the contactless communication with the MRTD’s chip, (ii) imple- ments the terminals part of the Basic Access Control Mechanism and (iii) gets the authorization to read the logical MRTD under the Basic Access Control by optical reading the MRTD or other parts of the passport book providing this information. The General Inspection System (GIS) is a Basic Inspection System which implements additionally the Chip Authentication Mechanism. The Extended Inspection System (EIS) in ad- dition to the General Inspection System (i) implements the Terminal Authentication Protocol and (ii) is au- thorized by the issuing State or Organization through the Document Verifier of the receiving State to read the sensitive biometric reference data. The security attributes of the EIS are defined of the Inspection Sys- tem Certificates. 3.1.2.7 MRTD Holder The rightful holder of the MRTD for whom the issuing State or Organization personalized the MRTD. 3.1.2.8 Traveler Person presenting the MRTD to the inspection system and claiming the identity of the MRTD holder. 3.1.2.9 Attacker A threat agent trying (i) to manipulate the logical MRTD without authorization, (ii) to read sensitive bio- metric reference data (i.e. EF.DG3, EF.DG4) or (iii) to forge a genuine MRTD. PP Application note 9: Note that an attacker trying to identify and to trace the movement of the MRTD’s chip remotely (i.e. without knowing or optically reading the physical MRTD) is not considered by this security target since this can only be averted by the BAC mechanism using the “weak” Document Basic Access Keys that is covered by [PP0055]. The same holds for the confidentiality of the user data EF.DG1, EF.DG2, EF.DG5 to EF.DG16 as well as EF.SOD and EF.COM. PP Application note 10: An impostor is attacking the inspection system as TOE IT environment independent on using a genuine, counterfeit or forged MRTD. Therefore the impostor may use results of successful at- tacks against the TOE but the attack itself is not relevant for the TOE. 3.2 Assumptions The assumptions describe the security aspects of the environment in which the TOE will be used or is in- tended to be used. 3.2.1 A.MRTD_Manufact MRTD manufacturing on steps 4 to 6 It is assumed that appropriate functionality testing of the MRTD is used. It is assumed that security proce- dures are used during all manufacturing and test operations to maintain confidentiality and integrity of the MRTD and of its manufacturing and test data (to prevent any possible copy, modification, retention, theft or unauthorized use). cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 30 of 97 3.2.2 A.MRTD_Delivery MRTD delivery during steps 4 to 6 Procedures shall guarantee the control of the TOE delivery and storage process and conformance to its objectives:  Procedures shall ensure protection of TOE material/information under delivery and storage.  Procedures shall ensure that corrective actions are taken in case of improper operation in the de- livery process and storage.  Procedures shall ensure that people dealing with the procedure for delivery have got the required skill. 3.2.3 A.Pers_Agent Personalization of the MRTD’s chip The Personalization Agent ensures the correctness of (i) the logical MRTD with respect to the MRTD holder, (ii) the Document Basic Access Keys, (iii) the Chip Authentication Public Key (EF.DG14) if stored on the MRTD’s chip, and (iv) the Document Signer Public Key Certificate (if stored on the MRTD’s chip). The Per- sonalization Agent signs the Document Security Object. The Personalization Agent bears the Personalization Agent Authentication to authenticate himself to the TOE by symmetric cryptographic mechanisms. 3.2.4 A.Insp_Sys Inspection Systems for global interoperability The Inspection System is used by the border control officer of the receiving State (i) examining an MRTD presented by the traveler and verifying its authenticity and (ii) verifying the traveler as MRTD holder. The Basic Inspection System for global interoperability (i) includes the Country Signing CA Public Key and the Document Signer Public Key of each issuing State or Organization, and (ii) implements the terminal part of the Basic Access Control. The Basic Inspection System reads the logical MRTD under Basic Access Control and performs the Passive Authentication to verify the logical MRTD. The General Inspection System in ad- dition to the Basic Inspection System implements the Chip Authentication Mechanism. The General Inspec- tion System verifies the authenticity of the MRTD’s chip during inspection and establishes secure messaging with keys established by the Chip Authentication Mechanism. The Extended Inspection System in addition to the General Inspection System (i) supports the Terminal Authentication Protocol and (ii) is authorized by the issuing State or Organization through the Document Verifier of the receiving State to read the sensitive biometric reference data. 3.2.5 A.Signature_PKI PKI for Passive Authentication The issuing and receiving States or Organizations establish a public key infrastructure for passive authenti- cation i.e. digital signature creation and verification for the logical MRTD. The issuing State or Organization runs a Certification Authority (CA) which securely generates, stores and uses the Country Signing CA Key pair. The CA keeps the Country Signing CA Private Key secret and is recommended to distribute the Country Signing CA Public Key to ICAO, all receiving States maintaining its integrity. The Document Signer (i) gener- ates the Document Signer Key Pair, (ii) hands over the Document Signer Public Key to the CA for certification, (iii) keeps the Document Signer Private Key secret and (iv) uses securely the Document Signer Private Key for signing the Document Security Objects of the MRTDs. The CA creates the Document Signer Certificates for the Document Signer Public Keys that are distributed to the receiving States and Organizations. 3.2.6 A.Auth_PKI PKI for Inspection Systems The issuing and receiving States or Organizations establish a public key infrastructure for card verifiable certificates of the Extended Access Control. The Country Verifying Certification Authorities, the Document Verifier and Extended Inspection Systems hold authentication key pairs and certificates for their public keys encoding the access control rights. The Country Verifying Certification Authorities of the issuing States or cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 31 of 97 Organizations are signing the certificates of the Document Verifier and the Document Verifiers are signing the certificates of the Extended Inspection Systems of the receiving States or Organizations. The issuing States or Organizations distribute the public keys of their Country Verifying Certification Authority to their MRTD’s chip. 3.3 Threats This section describes the threats to be averted by the TOE independently or in collaboration with its IT environment. These threats result from the TOE method of use in the operational environment and the assets stored in or protected by the TOE. PP Application note 11: The threats T.Chip_ID and T.Skimming (cf. [PP0055]) are averted by the mechanisms described in the BAC PP [PP0055] (cf. P.BAC-PP) which cannot withstand an attack with high attack potential thus these are not addressed here. T.Chip_ID addresses the threat of tracing the movement of the MRTD by identifying remotely the MRTD’s chip by establishing or listening to communications through the con- tactless communication interface. T.Skimming addresses the threat of imitating the inspection system to read the logical MRTD or parts of it via the contactless communication channel of the TOE. Both attacks are conducted by an attacker who cannot read the MRZ or who does not know the physical MRTD in advance. The TOE in collaboration with its IT environment shall avert the threats as specified below. 3.3.1 T.Read_Sensitive_Data Read the sensitive biometric reference data Adverse action: An attacker tries to gain the sensitive biometric reference data through the com- munication interface of the MRTD’s chip. The attack T.Read_Sensitive_Data is simi- lar to the threat T.Skimming (cf. [PP0055]) in respect of the attack path (communi- cation interface) and the motivation (to get data stored on the MRTD’s chip) but differs from those in the asset under the attack (sensitive biometric reference data vs. digital MRZ, digitized portrait and other data), the opportunity (i.e. knowing Doc- ument Basic Access Keys) and therefore the possible attack methods. Note, that the sensitive biometric reference data are stored only on the MRTD’s chip as private sensitive personal data whereas the MRZ data and the portrait are visually readable on the physical MRTD as well. Threat agent: having high attack potential, knowing the Document Basic Access Keys, being in possession of a legitimate MRTD Asset: confidentiality of sensitive logical MRTD (i.e. biometric reference) data. 3.3.2 T.Forgery Forgery of data on MRTD’s chip Adverse action: An attacker alters fraudulently the complete stored logical MRTD or any part of it including its security related data in order to deceive on an inspection system by means of the changed MRTD holder’s identity or biometric reference data. This threat comprises several attack scenarios of MRTD forgery. The attacker may alter the biographical data on the biographical data page of the passport book, in the printed MRZ and in the digital MRZ to claim another identity of the traveler. The attacker may alter the printed portrait and the digitized portrait to overcome the visual inspection of the inspection officer and the automated biometric authentica- tion mechanism by face recognition. The attacker may alter the biometric reference data to defeat automated biometric authentication mechanism of the inspection system. The attacker may combine data groups of different logical MRTDs to create a new forged MRTD, e.g. the attacker writes the digitized portrait and optional bio- metric reference finger data read from the logical MRTD of a traveler into another cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 32 of 97 MRTD’s chip leaving their digital MRZ unchanged to claim the identity of the holder this MRTD. The attacker may also copy the complete unchanged logical MRTD to another contactless chip. Threat agent: having high attack potential, being in possession of one or more legitimate MRTDs Asset: authenticity of logical MRTD data. 3.3.3 T.Counterfeit MRTD’s chip Adverse action: An attacker with high attack potential produces an unauthorized copy or reproduc- tion of a genuine MRTD’s chip to be used as part of a counterfeit MRTD. This violates the authenticity of the MRTD’s chip used for authentication of a traveler by posses- sion of a MRTD. The attacker may generate a new data set or extract completely or partially the data from a genuine MRTD’s chip and copy them on another appropri- ate chip to imitate this genuine MRTD’s chip. Threat agent: having high attack potential, being in possession of one or more legitimate MRTDs Asset: authenticity of logical MRTD data. The TOE shall avert the threats as specified below. 3.3.4 T.Abuse-Func Abuse of Functionality Adverse action: An attacker may use functions of the TOE which shall not be used in “Operational Use” phase in order (i) to manipulate User Data, (ii) to manipulate (explore, bypass, deactivate or change) security features or functions of the TOE or (iii) to disclose or to manipulate TSF Data. This threat addresses the misuse of the functions for the initialization and the personalization in the operational state after delivery to MRTD holder. Threat agent: having high attack potential, being in possession of a legitimate MRTD Asset: confidentiality and authenticity of logical MRTD and TSF data, correctness of TSF 3.3.5 T.Information_Leakage Information Leakage from MRTD’s chip Adverse action: An attacker may exploit information which is leaked from the TOE during its usage in order to disclose confidential TSF data. The information leakage may be inherent in the normal operation or caused by the attacker. Leakage may occur through em- anations, variations in power consumption, I/O characteristics, clock frequency, or by changes in processing time requirements. This leakage may be interpreted as a covert channel transmission but is more closely related to measurement of operat- ing parameters which may be derived either from measurements of the contactless interface (emanation) or direct measurements (by contact to the chip still available even for a contactless chip) and can then be related to the specific operation being performed. Examples are the Differential Electromagnetic Analysis (DEMA) and the Differential Power Analysis (DPA). Moreover the attacker may try actively to en- force information leakage by fault injection (e.g. Differential Fault Analysis). Threat agent: having high attack potential, being in possession of a legitimate MRTD Asset: confidentiality of logical MRTD and TSF data cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 33 of 97 3.3.6 T.Phys-Tamper Physical Tampering Adverse action: An attacker may perform physical probing of the MRTD’s chip in order (i) to disclose TSF Data, or (ii) to disclose/reconstruct the MRTD’s chip Embedded Software. An attacker may physically modify the MRTD’s chip in order to (i) modify security fea- tures or functions of the MRTD’s chip, (ii) modify security functions of the MRTD’s chip Embedded Software, (iii) modify User Data or (iv) to modify TSF data. The phys- ical tampering may be focused directly on the disclosure or manipulation of TOE User Data (e.g. the biometric reference data for the inspection system) or TSF Data (e.g. authentication key of the MRTD’s chip) or indirectly by preparation of the TOE to following attack methods by modification of security features (e.g. to enable in- formation leakage through power analysis). Physical tampering requires direct in- teraction with the MRTD’s chip internals. Techniques commonly employed in IC fail- ure analysis and IC reverse engineering efforts may be used. Before that, the hard- ware security mechanisms and layout characteristics need to be identified. Deter- mination of software design including treatment of User Data and TSF Data may also be a pre-requisite. The modification may result in the deactivation of a security function. Changes of circuitry or data can be permanent or temporary. Threat agent: having high attack potential, being in possession of a legitimate MRTD Asset: confidentiality and authenticity of logical MRTD and TSF data, correctness of TSF 3.3.7 T.Malfunction Malfunction due to Environmental Stress Adverse action: An attacker may cause a malfunction of TSF or of the MRTD’s chip Embedded Soft- ware by applying environmental stress in order to (i) deactivate or modify security features or functions of the TOE or (ii) circumvent, deactivate or modify security functions of the MRTD’s chip Embedded Software. This may be achieved e.g. by operating the MRTD’s chip outside the normal operating conditions, exploiting er- rors in the MRTD’s chip Embedded Software or misusing administration function. To exploit these vulnerabilities an attacker needs information about the functional operation. Threat agent: having high attack potential, being in possession of a legitimate MRTD Asset: confidentiality and authenticity of logical MRTD and TSF data, correctness of TSF 3.4 Organizational security policies The TOE shall comply with the following Organizational Security Policies (OSP) as security rules, procedures, practices, or guidelines imposed by an organization upon its operations (see CC part 1 [CC_1], section 3.2). 3.4.1 P.BAC-PP Fulfillment of the Basic Access Control Protection Profile. The issuing States or Organizations ensures that successfully authenticated Basic Inspection Systems have read access to logical MRTD data DG1, DG2, DG5 to DG16 the ‘ICAO Doc 9303’ [ICAODoc] as well as to the data groups Common and Security Data. The MRTD is successfully evaluated and certified in accordance with the ‘Common Criteria Protection Profile Machine Readable Travel Document with „ICAO Application", Basic Access Control’ [PP0055] in order to ensure the confidentiality of standard user data and preventing the traceability of the MRTD data. PP Application note 12: The organizational security policy P.Personal_Data drawn from the ‘ICAO Doc 9303’ [ICAODoc] is addressed by the [PP0055] (cf. P.BAC-PP). The confidentiality of the personal data other than EF.DG3 and EF.DG4 is ensured by the BAC mechanism. Note the BAC mechanisms may not resist attacks with high attack potential (cf. [PP0055]). The TOE shall protect the sensitive biometric reference data in cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 34 of 97 EF.DG3 and EF.DG4 against attacks with high attack potential. Due to the different resistance the protection of EF.DG3 and EF.DG4 on one side and the other EF.SOD, EF.COM, EF.DG1, EF.DG2 and EF.DG5 to EF.DG16 on the other side are addressed in separated protection profiles and security targets, which results in tech- nically separated evaluations (at least for classes ASE and VAN) and certificates (cf. also PP application note 1). 3.4.2 P.Sensitive_Data Privacy of sensitive biometric reference data The biometric reference data of finger(s) (EF.DG3) and iris image(s) (EF.DG4) are sensitive private personal data of the MRTD holder. The sensitive biometric reference data can be used only by inspection systems which are authorized for this access at the time the MRTD is presented to the inspection system (Extended Inspection Systems). The issuing State or Organization authorizes the Document Verifiers of the receiving States to manage the authorization of inspection systems within the limits defined by the Document Verifier Certificate. The MRTD’s chip shall protect the confidentiality and integrity of the sensitive private personal data even during transmission to the Extended Inspection System after Chip Authentication. 3.4.3 P.Manufact Manufacturing of the MRTD’s chip The Initialization Data are written by the IC Manufacturer to identify the IC uniquely. The MRTD Manufac- turer writes the Pre-personalization Data which contains at least the Personalization Agent Key. 3.4.4 P.Personalization Personalization of the MRTD by issuing State or Organization only The issuing State or Organization guarantees the correctness of the biographical data, the printed portrait and the digitized portrait, the biometric reference data and other data of the logical MRTD with respect to the MRTD holder. The personalization of the MRTD for the holder is performed by an agent authorized by the issuing State or Organization only. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 35 of 97 4 Security objectives This chapter describes the security objectives for the TOE and the security objectives for the TOE environ- ment. The security objectives for the TOE environment are separated into security objectives for the devel- opment and production environment and security objectives for the operational environment. 4.1 Security Objectives for the TOE This section describes the security objectives for the TOE addressing the aspects of identified threats to be countered by the TOE and organizational security policies to be met by the TOE. 4.1.1 OT.AC_Pers Access Control for Personalization of logical MRTD The TOE must ensure that the logical MRTD data in EF.DG1 to EF.DG16, the Document security object ac- cording to LDS [ICAODoc] and the TSF data can be written by authorized Personalization Agents only. The logical MRTD data in EF.DG1 to EF.DG16 and the TSF data may be written only during and cannot be changed after its personalization. The Document security object can be updated by authorized Personalization Agents if data in the data groups EF.DG3 to EF.DG16 are added. PP Application note 13: The OT.AC_Pers implies that (1) the data of the LDS groups written during personalization for MRTD holder (at least EF.DG1 and EF.DG2) cannot be changed by write access after personalization, (2) the Personalization Agents may (i) add (fill) data into the LDS data groups not written yet, and (ii) update and sign the Document Security Object accordingly. The support for adding data in the “Op- erational Use” phase is optional. 4.1.2 OT.Data_Int Integrity of personal data The TOE must ensure the integrity of the logical MRTD stored on the MRTD’s chip against physical manipu- lation and unauthorized writing. The TOE must ensure the integrity of the logical MRTD data during their transmission to the General Inspection System after Chip Authentication. 4.1.3 OT.Sens_Data_Conf Confidentiality of sensitive biometric reference data The TOE must ensure the confidentiality of the sensitive biometric reference data (EF.DG3 and EF.DG4) by granting read access only to authorized Extended Inspection Systems. The authorization of the inspection system is drawn from the Inspection System Certificate used for the successful authentication and shall be a non-strict subset of the authorization defined in the Document Verifier Certificate in the certificate chain to the Country Verifier Certification Authority of the issuing State or Organization. The TOE must ensure the confidentiality of the logical MRTD data during their transmission to the Extended Inspection System. The confidentiality of the sensitive biometric reference data shall be protected against attacks with high attack potential. 4.1.4 OT.Identification Identification and Authentication of the TOE The TOE must provide means to store IC Identification and Pre-Personalization Data in its nonvolatile memory. The IC Identification Data must provide a unique identification of the IC during Phase 2 “Manufac- turing” and Phase 3 “Personalization of the MRTD”. The storage of the Pre-Personalization data includes writing of the Personalization Agent Key(s). cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 36 of 97 4.1.5 OT.Chip_Auth_Proof Proof of MRTD’s chip authenticity The TOE must support the General Inspection Systems to verify the identity and authenticity of the MRTD’s chip as issued by the identified issuing State or Organization by means of the Chip Authentication as defined in [TR-03110]. The authenticity proof provided by MRTD’s chip shall be protected against attacks with high attack potential. PP application note 14: The OT.Chip_Auth_Proof implies the MRTD’s chip to have (i) a unique identity as given by the MRTD’s Document Number, (ii) a secret to prove its identity by knowledge i.e. a private au- thentication key as TSF data. The TOE shall protect this TSF data to prevent their misuse. The terminal shall have the reference data to verify the authentication attempt of MRTD’s chip i.e. a certificate for the Chip Authentication Public Key that matches the Chip Authentication Private Key of the MRTD’s chip. This certif- icate is provided by (i) the Chip Authentication Public Key (EF.DG14) in the LDS [ICAODoc] and (ii) the hash value of the Chip Authentication Public Key in the Document Security Object signed by the Document Signer. The following TOE security objectives address the protection provided by the MRTD’s chip independent of the TOE environment. 4.1.6 OT.Prot_Abuse-Func Protection against Abuse of Functionality After delivery of the TOE to the MRTD Holder, the TOE must prevent the abuse of test and support functions that may be maliciously used to (i) disclose critical User Data, (ii) manipulate critical User Data of the IC Embedded Software, (iii) manipulate Soft-coded IC Embedded Software or (iv) bypass, deactivate, change or explore security features or functions of the TOE. Details of the relevant attack scenarios depend, for instance, on the capabilities of the Test Features provided by the IC Dedicated Test Software which are not specified here. 4.1.7 OT.Prot_Inf_Leak Protection against Information Leakage The TOE must provide protection against disclosure of confidential TSF data stored and/or processed in the MRTD’s chip  by measurement and analysis of the shape and amplitude of signals or the time between events found by measuring signals on the electromagnetic field, power consumption, clock, or I/O lines and  by forcing a malfunction of the TOE and/or  by a physical manipulation of the TOE. PP application note 15: This objective pertains to measurements with subsequent complex signal pro- cessing due to normal operation of the TOE or operations enforced by an attacker. Details correspond to an analysis of attack scenarios which is not given here. 4.1.8 OT.Prot_Phys-Tamper Protection against Physical Tampering The TOE must provide protection of the confidentiality and integrity of the User Data, the TSF Data, and the MRTD’s chip Embedded Software. This includes protection against attacks with high attack potential by means of  measuring through galvanic contacts which is direct physical probing on the chips surface except on pads being bonded (using standard tools for measuring voltage and current) or  measuring not using galvanic contacts but other types of physical interaction between charges (us- ing tools used in solid-state physics research and IC failure analysis)  manipulation of the hardware and its security features, as well as cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 37 of 97  controlled manipulation of memory contents (User Data, TSF Data) with a prior  reverse-engineering to understand the design and its properties and functions. 4.1.9 OT.Prot_Malfunction Protection against Malfunctions The TOE must ensure its correct operation. The TOE must prevent its operation outside the normal operat- ing conditions where reliability and secure operation has not been proven or tested. This is to prevent er- rors. The environmental conditions may include external energy (esp. electromagnetic) fields, voltage (on any contacts), clock frequency, or temperature. PP application note 16: A malfunction of the TOE may also be caused using a direct interaction with ele- ments on the chip surface. This is considered as being a manipulation (refer to the objective OT.Prot_Phys- Tamper) provided that detailed knowledge about the TOE´s internals. 4.1.10 OT.Active_Auth_Proof Proof of MRTD’s chip authenticity The TOE shall support the Basic Inspection Systems to verify the identity and authenticity of the MRTD’s chip as issued by the identified issuing State or Organization by means of the Active Authentication as de- fined in [ICAODoc]. The authenticity proof provided by MRTD’s chip shall be protected against attacks with high attack potential. 4.2 Security Objectives for the Operational Environment 4.2.1 Issuing State or Organization The issuing State or Organization will implement the following security objectives of the TOE environment. 4.2.1.1 OE.MRTD_Manufact Protection of the MRTD Manufacturing Appropriate functionality testing of the TOE shall be used in step 4 to 6. During all manufacturing and test operations, security procedures shall be used through phases 4, 5 and 6 to maintain confidentiality and integrity of the TOE and its manufacturing and test data. 4.2.1.2 OE.MRTD_ Delivery Protection of the MRTD delivery Procedures shall ensure protection of TOE material/information under delivery including the following ob- jectives:  non-disclosure of any security relevant information,  identification of the element under delivery,  meet confidentiality rules (confidentiality level, transmittal form, reception acknowledgment),  physical protection to prevent external damage,  secure storage and handling procedures (including rejected TOE’s),  traceability of TOE during delivery including the following parameters: o origin and shipment details, o reception, reception acknowledgement, o location material/information. Procedures shall ensure that corrective actions are taken in case of improper operation in the delivery pro- cess (including if applicable any non-conformance to the confidentiality convention) and highlight all non- conformance to this process. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 38 of 97 Procedures shall ensure that people (shipping department, carrier, reception department) dealing with the procedure for delivery have got the required skill, training and knowledge to meet the procedure require- ments and be able to act fully in accordance with the above expectations. 4.2.1.3 OE.Personalization Personalization of logical MRTD The issuing State or Organization must ensure that the Personalization Agents acting on behalf of the issuing State or Organization (i) establish the correct identity of the holder and create biographical data for the MRTD, (ii) enroll the biometric reference data of the MRTD holder i.e. the portrait, the encoded finger im- age(s) and/or the encoded iris image(s) and (iii) personalize the MRTD for the holder together with the defined physical and logical security measures to protect the confidentiality and integrity of these data. 4.2.1.4 OE.Pass_Auth_Sign Authentication of logical MRTD by Signature The issuing State or Organization must (i) generate a cryptographic secure Country Signing CA Key Pair, (ii) ensure the secrecy of the Country Signing CA Private Key and sign Document Signer Certificates in a secure operational environment, and (iii) distribute the Certificate of the Country Signing CA Public Key to receiving States and Organizations maintaining its authenticity and integrity. The issuing State or Organization must (i) generate a cryptographic secure Document Signer Key Pair and ensure the secrecy of the Document Signer Private Keys, (ii) sign Document Security Objects of genuine MRTD in a secure operational environ- ment only and (iii) distribute the Certificate of the Document Signer Public Key to receiving States and Or- ganizations. The digital signature in the Document Security Object relates to all data in the data in EF.DG1 to EF.DG16 if stored in the LDS according to [ICAODoc]. 4.2.1.5 OE.Auth_Key_MRTD MRTD Authentication Key The issuing State or Organization has to establish the necessary public key infrastructure in order to (i) gen- erate the MRTD’s Chip Authentication Key Pair, (ii) sign and store the Chip Authentication Public Key in the Chip Authentication Public Key data in EF.DG14 and (iii) support inspection systems of receiving States or organizations to verify the authenticity of the MRTD’s chip used for genuine MRTD by certification of the Chip Authentication Public Key by means of the Document Security Object. 4.2.1.6 OE.Authoriz_Sens_Data Authorization for Use of Sensitive Biometric Reference Data The issuing State or Organization has to establish the necessary public key infrastructure in order to limit the access to sensitive biometric reference data of MRTD’s holders to authorized receiving States or Organ- izations. The Country Verifying Certification Authority of the issuing State or Organization generates card verifiable Document Verifier Certificates for the authorized Document Verifier only. 4.2.1.7 OE.BAC_PP Fulfillment of the Basic Access Control Protection Profile. It has to be ensured by the issuing State or Organization, that the TOE is additionally successfully evaluated and certified in accordance with the ‘Common Criteria Protection Profile Machine Readable Travel Docu- ment with „ICAO Application", Basic Access Control’ [PP0055]. This is necessary to cover the BAC mechanism ensuring the confidentiality of standard user data and preventing the traceability of the MRTD data. Note that due to the differences within the assumed attack potential the addressed evaluation and certification is a technically separated process. 4.2.1.8 OE.Active_Auth_Key_MRTD MRTD Active Authentication Key The issuing State or Organization has to establish the necessary public key infrastructure in order to (i) gen- erate the MRTD’s Active Authentication Key Pair, (ii) sign and store the Active Authentication Public Key in the Active Authentication Public Key data in EF.DG15 and (iii) support inspection systems of receiving States or organizations to verify the authenticity of the MRTD’s chip used for genuine MRTD by certification of the Active Authentication Public Key by means of the Document Security Object. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 39 of 97 Justification for the added objective for the environment OE.Active_Auth_Key_MRTD: This security objective for the operational environment addresses the optional Active Authentication mech- anism. It neither mitigates a threat meant to be addressed by security objectives for the TOE – this is achieved by chip authentication alone - nor fulfils an OSP meant to be addressed by security objectives for the TOE. 4.2.2 Receiving State or Organization The receiving State or Organization will implement the following security objectives of the TOE environ- ment. 4.2.2.1 OE.Exam_MRTD Examination of the MRTD passport book The inspection system of the receiving State or Organization must examine the MRTD presented by the traveler to verify its authenticity by means of the physical security measures and to detect any manipulation of the physical MRTD. The Basic Inspection System for global interoperability (i) includes the Country Signing CA Public Key and the Document Signer Public Key of each issuing State or Organization, and (ii) implements the terminal part of the Basic Access Control [ICAODoc]. Additionally General Inspection Systems and Ex- tended Inspection Systems perform the Chip Authentication Protocol to verify the Authenticity of the pre- sented MRTD’s chip. 4.2.2.2 OE.Passive_Auth_Verif Verification by Passive Authentication The border control officer of the receiving State uses the inspection system to verify the traveler as MRTD holder. The inspection systems must have successfully verified the signature of Document Security Objects and the integrity data elements of the logical MRTD before they are used. The receiving States and Organi- zations must manage the Country Signing CA Public Key and the Document Signer Public Key maintaining their authenticity and availability in all inspection systems. 4.2.2.3 OE.Prot_Logical_MRTD Protection of data from the logical MRTD The inspection system of the receiving State or Organization ensures the confidentiality and integrity of the data read from the logical MRTD. The inspection system will prevent eavesdropping to their communication with the TOE before secure messaging is successfully established based on the Chip Authentication Protocol. PP application note 17: The figure 2.1 in [TR-03110] supposes that the GIS and the EIS follow the order (i) running the Basic Access Control Protocol, (ii) reading and verifying only those parts of the logical MRTD that are necessary to know for the Chip Authentication Mechanism (i.e. Document Security Object and Chip Authentication Public Key), (iii) running the Chip Authentication Protocol, and (iv) reading and verifying the less-sensitive data of the logical MRTD after Chip Authentication. The supposed sequence has the advantage that the less-sensitive data are protected by secure messaging with cryptographic keys based on the Chip Authentication Protocol which quality is under control of the TOE. The inspection system will prevent addi- tionally eavesdropping to their communication with the TOE before secure messaging is successfully estab- lished based on the Chip Authentication Protocol. Note that reading the lesssensitive data directly after Basic Access Control Mechanism is allowed and is not assumed as threat in this ST. But the TOE ensures that reading of sensitive data is possible after successful Chip Authentication and Terminal Authentication Pro- tocol only. 4.2.2.4 OE.Ext_Insp_Systems: Authorization of Extended Inspection Systems The Document Verifier of receiving States or Organizations authorizes Extended Inspection Systems by cre- ation of Inspection System Certificates for access to sensitive biometric reference data of the logical MRTD. The Extended Inspection System authenticates themselves to the MRTD’s chip for access to the sensitive biometric reference data with its private Terminal Authentication Key and its Inspection System Certificate. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 40 of 97 4.3 Security Objective Rationale The following table provides an overview for security objectives coverage. OT.AC_Pers OT.Data_Int OT.Sens_Data_Conf OT.Identification OT.Chip_Auth_Proof OT.Prot_Abuse-Func OT.Prot_Inf_Leak OT.Prot_Phys-Tamper OT.Prot_Malfuntion OT.Active_Auth_Proof OE.MRTD_Manufact OE.MRTD_Delivery OE.Personalization OE.Pass_Auth_Sign OE.Auth_Key_MRTD OE.Authoriz_Sens_Data OE.BAC-PP OE.Active_Auth_Key_MRTD OE.Exam_MRTD OE.Passive_Auth_Verif OE.Prot_Logical_MRTD OE.Ext_Insp_Systems T. Read_Sensitive_Data x x x T.Forgery x x x x x x T.Counterfeit x x x x x T.Abuse-Func x T.Information_Leakage x T.Phys-Tamper x T.Malfunction x P.BAC-PP x P.Sensitive_Data x x x P.Manufact x P.Personalisation x x x A.MRTD_Manufact x A.MRTD_Delivery x A.Pers_Agent x A.Insp_Sys x x A.Signature_PKI x x A.Auth_PKI x x Table 8: Overview of the security objectives coverage The OSP P. BAC-PP is directly addressed by the OE.BAC-PP. The OSP P.Manufact “Manufacturing of the MRTD’s chip” requires a unique identification of the IC by means of the Initialization Data and the writing of the Pre-personalization Data as being fulfilled by OT.Identification. The OSP P.Personalization “Personalization of the MRTD by issuing State or Organization only” addresses the (i) the enrolment of the logical MRTD by the Personalization Agent as described in the security objective for the TOE environment OE.Personalization “Personalization of logical MRTD”, and (ii) the access control for the user data and TSF data as described by the security objective OT.AC_Pers “Access Control for Per- sonalization of logical MRTD”. Note the manufacturer equips the TOE with the Personalization Agent Key(s) according to OT.Identification “Identification and Authentication of the TOE”. The security objective OT.AC_Pers limits the management of TSF data and the management of TSF to the Personalization Agent. The OSP P.Sensitive_Data “Privacy of sensitive biometric reference data” is fulfilled and the threat T.Read_Sensitive_Data “Read the sensitive biometric reference data” is countered by the TOE-objective OT.Sens_Data_Conf “Confidentiality of sensitive biometric reference data” requiring that read access to EF.DG3 and EF.DG4 (containing the sensitive biometric reference data) is only granted to authorized inspec- tion systems. Furthermore it is required that the transmission of these data ensures the data’s confidenti- ality. The authorization bases on Document Verifier certificates issued by the issuing State or Organization as required by OE.Authoriz_Sens_Data “Authorization for use of sensitive biometric reference data”. The cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 41 of 97 Document Verifier of the receiving State has to authorize Extended Inspection Systems by creating appro- priate Inspection System certificates for access to the sensitive biometric reference data as demanded by OE.Ext_Insp_Systems “Authorization of Extended Inspection Systems”. The threat T.Forgery “Forgery of data on MRTD’s chip” addresses the fraudulent alteration of the complete stored logical MRTD or any part of it. The security objective OT.AC_Pers “Access Control for Personalization of logical MRTD“ requires the TOE to limit the write access for the logical MRTD to the trustworthy Person- alization Agent (cf. OE.Personalization). The TOE will protect the integrity of the stored logical MRTD ac- cording the security objective OT.Data_Int “Integrity of personal data” and OT.Prot_Phys-Tamper “Protec- tion against Physical Tampering”. The examination of the presented MRTD passport book according to OE.Exam_MRTD “Examination of the MRTD passport book” shall ensure that passport book does not con- tain a sensitive contactless chip which may present the complete unchanged logical MRTD. The TOE envi- ronment will detect partly forged logical MRTD data by means of digital signature which will be created according to OE.Pass_Auth_Sign “Authentication of logical MRTD by Signature” and verified by the inspec- tion system according to OE.Passive_Auth_Verif “Verification by Passive Authentication”. The threat T.Counterfeit “MRTD’s chip” addresses the attack of unauthorized copy or reproduction of the genuine MRTD chip. This attack is thwarted by chip an identification and authenticity proof required by OT.Chip_Auth_Proof “Proof of MRTD’s chip authentication” using a authentication key pair to be generated by the issuing State or Organization. The Public Chip Authentication Key has to be written into EF.DG14 and signed by means of Documents Security Objects as demanded by OE.Auth_Key_MRTD “MRTD Authentica- tion Key”. According to OE.Exam_MRTD “Examination of the MRTD passport book” the General Inspection system has to perform the Chip Authentication Protocol to verify the authenticity of the MRTD’s chip. It is also adressed by OT.Active_Auth_Proof which erquires an optional Active Authentication mechanism. The corresponding support of the Active Authentication mechanism by the environment is adressed by OE.Active_Auth_Key_MRTD. The threat T.Abuse-Func “Abuse of Functionality” addresses attacks of misusing MRTD’s functionality to disable or bypass the TSFs. The security objective for the TOE OT.Prot_Abuse-Func “Protection against abuse of functionality” ensures that the usage of functions which may not be used in the “Operational Use” phase is effectively prevented. Therefore attacks intending to abuse functionality in order to disclose or manipulate critical (User) Data or to affect the TOE in such a way that security features or TOE’s functions may be bypassed, deactivated, changed or explored shall be effectively countered. The threats T.Information_Leakage “Information Leakage from MRTD’s chip”, T.Phys-Tamper “Physical Tampering” and T.Malfunction “Malfunction due to Environmental Stress” are typical for integrated circuits like smart cards under direct attack with high attack potential. The protection of the TOE against these threats is addressed by the directly related security objectives OT.Prot_Inf_Leak “Protection against Infor- mation Leakage”, OT.Prot_Phys-Tamper “Protection against Physical Tampering” and OT.Prot_Malfunction “Protection against Malfunctions”. The assumption A.MRTD_Manufact “MRTD manufacturing on step 4 to 6” is covered by the security objec- tive for the TOE environment OE.MRTD_Manufact “Protection of the MRTD Manufacturing” that requires to use security procedures during all manufacturing steps. The assumption A.MRTD_ Delivery “MRTD delivery during step 4 to 6” is covered by the security objective for the TOE environment OE.MRTD_ Delivery “Protection of the MRTD delivery” that requires to use secu- rity procedures during delivery steps of the MRTD. The assumption A.Pers_Agent “Personalization of the MRTD’s chip” is covered by the security objective for the TOE environment OE.Personalization “Personalization of logical MRTD” including the enrolment, the protection with digital signature and the storage of the MRTD holder personal data. The examination of the MRTD passport book addressed by the assumption A.Insp_Sys “Inspection Systems for global interoperability” is covered by the security objectives for the TOE environment OE.Exam_MRTD “Examination of the MRTD passport book” which requires the inspection system to examine physically the cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 42 of 97 MRTD, the Basic Inspection System to implement the Basic Access Control, and the General Inspection Sys- tems and Extended Inspection Systems to implement and to perform the Chip Authentication Protocol to verify the Authenticity of the presented MRTD’s chip. The security objectives for the TOE environment OE.Prot_Logical_MRTD “Protection of data from the logical MRTD” require the Inspection System to pro- tect the logical MRTD data during the transmission and the internal handling. The assumption A.Signature_PKI “PKI for Passive Authentication” is directly covered by the security objec- tive for the TOE environment OE.Pass_Auth_Sign “Authentication of logical MRTD by Signature” covering the necessary procedures for the Country Signing CA Key Pair and the Document Signer Key Pairs. The im- plementation of the signature verification procedures is covered by OE.Exam_MRTD “Examination of the MRTD passport book”. The assumption A.Auth_PKI “PKI for Inspection Systems” is covered by the security objective for the TOE environment OE.Authoriz_Sens_Data “Authorization for use of sensitive biometric reference data” requires the CVCA to limit the read access to sensitive biometrics by issuing Document Verifier certificates for au- thorized receiving States or Organizations only. The Document Verifier of the receiving State is required by OE.Ext_Insp_Systems “Authorization of Extended Inspection Systems” to authorize Extended Inspection Systems by creating Inspection System Certificates. Therefore, the receiving issuing State or Organization has to establish the necessary public key infrastructure. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 43 of 97 5 Extended Components Definition This security target uses components defined as extensions to CC part 2. Some of these components are defined in [PP0002], other components are defined in the protection profile [PP0056]. This chapter has been taken from [PP0056] with minor modifications. 5.1 Definition of the Family FAU_SAS To define the security functional requirements of the TOE a sensitive family (FAU_SAS) of the Class FAU (Security Audit) is defined here. This family describes the functional requirements for the storage of audit data. It has a more general approach than FAU_GEN, because it does not necessarily require the data to be generated by the TOE itself and because it does not give specific details of the content of the audit records. The family “Audit data storage (FAU_SAS)” is specified as follows. FAU_SAS Audit data storage Family behavior This family defines functional requirements for the storage of audit data. Component leveling FAU_SAS.1 Requires the TOE to provide the possibility to store audit data. Management: FAU_SAS.1 There are no management activities foreseen. Audit: FAU_SAS.1 There are no actions defined to be auditable. FAU_SAS.1 Audit storage Hierarchical to: No other components. Dependencies: No dependencies. FAU_SAS.1.1 The TSF shall provide [assignment: authorized users] with the capability to store [assignment: list of audit information] in the audit records. 5.2 Definition of the Family FCS_RND To define the IT security functional requirements of the TOE a sensitive family (FCS_RND) of the Class FCS (cryptographic support) is defined here. This family describes the functional FCS_RND is not limited to gen- eration of cryptographic keys unlike the component FCS_CKM.1. The similar component FIA_SOS.2 is in- tended for non-cryptographic use. The family “Generation of random numbers (FCS_RND)” is specified as follows. FCS_RND Generation of random numbers Family behavior FAU_SAS Audit storage 1 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 44 of 97 This family defines quality requirements for the generation of random numbers which are intended to be used for cryptographic purposes. Component leveling: FCS_RND.1 Generation of random numbers requires that random numbers meet a defined quality metric. Management: FCS_RND.1 There are no management activities foreseen. Audit: FCS_RND.1 There are no actions defined to be auditable. FCS_RND.1 Quality metric for random numbers Hierarchical to: No other components. Dependencies: No dependencies. FCS_RND.1.1 The TSF shall provide a mechanism to generate random numbers that meet [assign- ment: a defined quality metric]. 5.3 Definition of the Family FIA_API To describe the IT security functional requirements of the TOE a sensitive family (FIA_API) of the Class FIA (Identification and authentication) is defined here. This family describes the functional requirements for the proof of the claimed identity for the authentication verification by an external entity where the other fam- ilies of the class FIA address the verification of the identity of an external entity. PP application note 18: The other families of the Class FIA describe only the authentication verification of users’ identity performed by the TOE and do not describe the functionality of the user to prove their iden- tity. The following paragraph defines the family FIA_API in the style of the Common Criteria part 2 (cf. [3], chapter “Explicitly stated IT security requirements (APE_SRE)”) from a TOE point of view. FIA_API Authentication Proof of Identity Family behavior This family defines functions provided by the TOE to prove their identity and to be verified by an external entity in the TOE IT environment. Component leveling: FIA_API.1 Authentication Proof of Identity. Management: FIA_API.1 The following actions could be considered for the management functions in FMT: Management of authentication information used to prove the claimed identity. Audit: There are no actions defined to be auditable. FIA_API.1 Authentication Proof of Identity Hierarchical to: No other components. FCS_RND Generation of random numbers 1 FIA_API Authentication Proof of Identity 1 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 45 of 97 Dependencies: No dependencies. FIA_API.1.1 The TSF shall provide a [assignment: authentication mechanism] to prove the iden- tity of the [assignment: authorized user or role]. 5.4 Definition of the Family FMT_LIM The family FMT_LIM describes the functional requirements for the Test Features of the TOE. The new func- tional requirements were defined in the class FMT because this class addresses the management of func- tions of the TSF. The examples of the technical mechanism used in the TOE show that no other class is appropriate to address the specific issues of preventing the abuse of functions by limiting the capabilities of the functions and by limiting their availability. The family “Limited capabilities and availability (FMT_LIM)” is specified as follows. FMT_LIM Limited capabilities and availability Family behavior This family defines requirements that limit the capabilities and availability of functions in a combined man- ner. Note, that FDP_ACF restricts the access to functions whereas the Limited capability of this family re- quires the functions themselves to be designed in a specific manner. Component leveling: FMT_LIM.1 Limited capabilities requires that the TSF is built to provide only the capabilities (perform action, gather information) necessary for its genuine purpose. FMT_LIM.2 Limited availability requires that the TSF restrict the use of functions (refer to Lim- ited capabilities (FMT_LIM.1)). This can be achieved, for instance, by removing or by disabling functions in a specific phase of the TOE’s lifecycle. Management: FMT_LIM.1, FMT_LIM.2 There are no management activities foreseen. Audit: FMT_LIM.1, FMT_LIM.2 There are no actions defined to be auditable. To define the IT security functional requirements of the TOE a sensitive family (FMT_LIM) of the Class FMT (Security Management) is defined here. This family describes the functional requirements for the Test Fea- tures of the TOE. The new functional requirements were defined in the class FMT because this class ad- dresses the management of functions of the TSF. The examples of the technical mechanism used in the TOE show that no other class is appropriate to address the specific issues of preventing the abuse of functions by limiting the capabilities of the functions and by limiting their availability. The TOE Functional Requirement “Limited capabilities (FMT_LIM.1)” is specified as follows. FMT_LIM.1 Limited capabilities Hierarchical to: No other components. Dependencies: FMT_LIM.2 Limited availability. FMT_LIM Limited capabilities and availability 1 2 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 46 of 97 FMT_LIM.1.1 The TSF shall be designed in a manner that limits their capabilities so that in con- junction with “Limited availability (FMT_LIM.2)” the following policy is enforced: [assignment: Limited capability and availability policy]. The TOE Functional Requirement “Limited availability (FMT_LIM.2)” is specified as follows. FMT_LIM.2 Limited availability Hierarchical to: No other components. Dependencies: FMT_LIM.1 Limited capabilities. FMT_LIM.2.1 The TSF shall be designed in a manner that limits their availability so that in con- junction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: [assignment: Limited capability and availability policy]. PP application note 19: The functional requirements FMT_LIM.1 and FMT_LIM.2 assume that there are two types of mechanisms (limited capabilities and limited availability) which together shall provide protection in order to enforce the policy. This also allows that (i) the TSF is provided without restrictions in the product in its user environment but its capabilities are so limited that the policy is enforced or conversely (ii) the TSF is designed with test and support functionality that is removed from, or disabled in, the product prior to the Operational Use Phase. The combination of both requirements shall enforce the policy. 5.5 Definition of the Family FPT_EMSEC The sensitive family FPT_EMSEC (TOE Emanation) of the Class FPT (Protection of the TSF) is defined here to describe the IT security functional requirements of the TOE. The TOE shall prevent attacks against the TOE and other secret data where the attack is based on external observable physical phenomena of the TOE. Examples of such attacks are evaluation of TOE’s electromagnetic radiation, simple power analysis (SPA), differential power analysis (DPA), timing attacks, etc. This family describes the functional requirements for the limitation of intelligible emanations which are not directly addressed by any other component of CC part 2 [CC_2]. The family “TOE Emanation (FPT_EMSEC)” is specified as follows. Family behavior This family defines requirements to mitigate intelligible emanations. Component leveling: FPT_EMSEC.1 TOE emanation has two constituents: FPT_EMSEC.1.1 Limit of Emissions requires to not emit intelligible emissions enabling access to TSF data or user data. FPT_EMSEC.1.2 Interface Emanation requires to not emit interface emanation enabling access to TSF data or user data. Management: FPT_EMSEC.1 FPT_EMSEC TOE emanation 1 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 47 of 97 There are no management activities foreseen. Audit: FPT_EMSEC.1 There are no actions defined to be auditable. FPT_EMSEC.1 TOE Emanation Hierarchical to: No other components. Dependencies: No dependencies. FPT_EMSEC.1.1 The TOE shall not emit [assignment: types of emissions] in excess of [assignment: specified limits] enabling access to [assignment: list of types of TSF data] and [as- signment: list of types of user data]. FPT_EMSEC.1.2 The TSF shall ensure [assignment: type of users] are unable to use the following interface [assignment: type of connection] to gain access to [assignment: list of types of TSF data] and [assignment: list of types of user data]. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 48 of 97 6 Security Requirements The CC allows several operations to be performed on functional requirements; refinement, selection, as- signment, and iteration are defined in paragraph C.4 of Part 1 [CC_1] of the CC. Each of these operations is used in this ST and the underlying PP. Operations already performed in the underlying PP [PP0056] are uniformly marked by bold italic font style; for further information on details of the operation, please refer to [PP0056]. Operations performed within this Security Target are marked by bold underlined font style; further infor- mation on details of the operation is provided in foot notes. 6.1 Security Definitions Definition of security attributes: Security Attribute Values Meaning Terminal Authenti- cation Status none (any Terminal) default role (i.e. without authorisation after start-up) CVCA roles defined in the certificate used for authentication (cf. [TR-03110], A.5.1); Terminal is authenticated as Country Verifying Certification Authority after successful CA and TA DV (domestic) roles defined in the certificate used for authentication (cf. [TR-03110], A.5.1); Terminal is authenticated as domestic Document Verifier after successful CA and TA DV (foreign) roles defined in the certificate used for authentication (cf. [TR-03110], A.5.1); Terminal is authenticated as foreign Document Verifier after successful CA and TA IS roles defined in the certificate used for authentication (cf. [TR-03110], A.5.1); Terminal is authenticated as Extended Inspection System after successful CA and TA Terminal Authori- zation none DG4 (Iris) Read access to DG4: (cf. [TR-03110], A.5.1) DG3 (Fingerprint) Read access to DG3: (cf. [TR-03110], A.5.1) DG3 (Iris) / DG4 (Fin- gerprint) Read access to DG3 and DG4: (cf. [TR-03110], A.5.1) Table 9: Definition of security attributes. The following table provides an overview of the keys and certificates used: Name Abbrevia- tion Description Country Verifying Certi- fication Authority Pri- vate Key SKCVCA The Country Verifying Certification Authority (CVCA) holds a private key (SKCVCA) used for signing the Document Verifier Certificates. Country Verifying Certi- fication Authority Public Key PKCVCA The TOE stores the Country Verifying Certification Authority Public Key (PKCVCA) as part of the TSF data to verify the Docu- ment Verifier Certificates. The PKCVCA has the security attrib- ute Current Date as the most recent valid effective date of cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 49 of 97 Name Abbrevia- tion Description the Country Verifying Certification Authority Certificate or of a domestic Document Verifier Certificate. Country Verifying Certi- fication Authority Certif- icate CCVCA The Country Verifying Certification Authority Certificate may be a self-signed certificate or a link certificate (cf. [PP0055] and Glossary). It contains (i) the Country Verifying Certifica- tion Authority Public Key (PKCVCA) as authentication reference data, (ii) the coded access control rights of the Country Veri- fying Certification Authority, (iii) the Certificate Effective Date and the Certificate Expiration Date as security attrib- utes. Document Verifier Cer- tificate CDV The Document Verifier Certificate CDV is issued by the Country Verifying Certification Authority. It contains (i) the Document Verifier Public Key (PKDV) as authentication reference data (ii) identification as domestic or foreign Document Verifier, the coded access control rights of the Document Verifier, the Certificate Effective Date and the Certificate Expiration Date as security attributes. Inspection System Certi- ficate CIS The Inspection System Certificate (CIS) is issued by the Docu- ment Verifier. It contains (i) as authentication reference data the Inspection System Public Key (PKIS), (ii) the coded access control rights of the Extended Inspection System, the Certifi- cate Effective Date and the Certificate Expiration Date as se- curity attributes. Chip Authentication Public Key Pair The Chip Authentication Public Key Pair (SKICC, PKICC) are used for Key Agreement Protocol: Diffie-Hellman (DH) according to RFC 2631 or Elliptic Curve Diffie-Hellman according to ISO 15946. Chip Authentication Public Key PKICC The Chip Authentication Public Key (PKICC) is stored in the EF.DG14 Chip Authentication Public Key of the TOE’s logical MRTD and used by the inspection system for Chip Authenti- cation of the MRTD’s chip. It is part of the user data provided by the TOE for the IT environment. Authentication Private Key SKICC The Chip Authentication Private Key (SKICC) is used by the TOE to authenticate itself as authentic MRTD’s chip. It is part of the TSF data. Country Signing Certifi- cation Authority Key Pair Country Signing Certification Authority of the Issuing State or Organization signs the Document Signer Public Key Certifi- cate with the Country Signing Certification Authority Private Key and the signature will be verified by Receiving State or Organization (e.g. a Basic Inspection System) with the Coun- try Signing Certification Authority Public Key. Document Signer Key Pairs Document Signer of the Issuing State or Organization signs the Document Security Object of the logical MRTD with the Document Signer Private Key and the signature will be veri- fied by a Basic Inspection Systems of the Receiving State or organization with the Document Signer Public Key. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 50 of 97 Name Abbrevia- tion Description Document Basic Access Keys The Document Basic Access Key is created by the Personali- zation Agent, loaded to the TOE, and used for mutual authen- tication and the key agreement for secure messaging be- tween the MRTD’s chip and the Inspection System. BAC Session Keys Secure messaging Triple-DES key and Retail-MAC key or AES and AES-CMAC agreed between the TOE and a BIS in result of the Basic Access Control Authentication Protocol. Chip Session Key Secure messaging AES and AES-CMAC key agreed between the TOE and a GIS in result of the Chip Authentication Proto- col. Active Authentication Public Key (optional) Public Key for the optional Active Authentication Protocol ac- cording to [ICAODoc]. Active Authentication Private Key (optional) Private Key for the optional Active Authentication Protocol according to [ICAODoc]. Table 10: Overview of the keys and certificates. PP application note 20: The Country Verifying Certification Authority identifies a Document Verifier as “do- mestic” in the Document Verifier Certificate if it belongs to the same State as the Country Verifying Certifi- cation Authority. The Country Verifying Certification Authority identifies a Document Verifier as “foreign” in the Document Verifier Certificate if it does not belong to the same State as the Country Verifying Certifi- cation Authority. From MRTD’s point of view the domestic Document Verifier belongs to the issuing State or Organization. 6.2 Security Functional Requirements for the TOE This section on security functional requirements for the TOE is divided into sub-section following the main security functionality. 6.2.1 Class FAU Security Audit The TOE shall meet the requirement “Audit storage (FAU_SAS.1)” as specified below (Common Criteria Part 2 extended). FAU_SAS.1 Audit storage Hierarchical to: No other components. Dependencies: No dependencies. FAU_SAS.1.1 The TSF shall provide the Manufacturer with the capability to store the IC Identifi- cation Data in the audit records. PP Application note 21: The Manufacturer role is the default user identity assumed by the TOE in the Phase 2 Manufacturing. The IC manufacturer and the MRTD manufacturer in the Manufacturer role write the Ini- tialization Data and/or Pre-personalization Data as TSF Data of the TOE. The audit records are write-only- once data of the MRTD’s chip (see FMT_MTD.1/INI_DIS). cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 51 of 97 6.2.2 Class Cryptographic Support (FCS) The TOE shall meet the requirement “Cryptographic key generation (FCS_CKM.1)” as specified below (Com- mon Criteria Part 2). The iterations are caused by different cryptographic key generation algorithms to be implemented and key to be generated by the TOE. FCS_CKM.1 Cryptographic key generation Hierarchical to: No other components. Dependencies: [FCS_CKM.2 Cryptographic key distribution or FCS_COP.1 Cryptographic operation] FCS_CKM.4 Cryptographic key destruction FCS_CKM.1.1 The TSF shall generate cryptographic keys in accordance with a specified crypto- graphic key generation algorithm: based on the Diffie-Hellman key derivation Pro- tocol compliant to PKCS#3 with cryptographic key sizes of 1976 - 2048 bit, or ECDH compliant to ISO 15946 with the domain parameters provided in NIST DSS stand- ard FIPS 186-3 [FIPS186-3] Appendix D or in Brainpool ECC Standard Curves [Brain- pool] chapters 3.1 to 3.5 with cryptographic key sizes 256 and 320 bit5 that meet the following: [TR-03110] , Annex A.1.6 PP Application note 22: The TOE generates a shared secret value with the terminal during the Chip Authen- tication Protocol, see [TR-03110], sec. 3.1 and Annex A.1. The shared secret value is used to derive the AES key for encryption and the Retail-MAC Chip Session Keys according to the Document Basic Access Key Der- ivation Algorithm [ICAODoc], normative appendix 5, A5.1, for the TSF required by FCS_COP.1/SYM and FCS_COP.1/MAC. The TOE shall meet the requirement “Cryptographic key destruction (FCS_CKM.4)” as specified below (Com- mon Criteria Part 2). FCS_CKM.4 Cryptographic key destruction Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4.1 The TSF shall destroy cryptographic keys in accordance with a specified crypto- graphic key destruction method physically overwriting the keys with zeros7 that meets the following: none8 . PP Application note 23: The TOE shall destroy the BAC Session Keys (i) after detection of an error in a re- ceived command by verification of the MAC, and (ii) after successful run of the Chip Authentication Protocol. 5 [assignment: cryptographic key generation algorithm] 6 The combination of the two cryptographic algorithms with an „or“ is due to the fact that the final TOE may be configured in a way that only one of the two cryptographic algorithms is activated. 7 [assignment: cryptographic key destruction method] 8 [assignment: list of standards] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 52 of 97 The TOE shall destroy the Chip Session Keys after detection of an error in a received command by verifica- tion of the MAC. The TOE shall clear the memory area of any session keys before starting the communication with the terminal in a new power-on-session. 6.2.2.1 Cryptographic operation (FCS_COP.1) The TOE shall meet the requirement “Cryptographic operation (FCS_COP.1)” as specified below (Common Criteria Part 2). The iterations are caused by different cryptographic algorithms to be implemented by the TOE. FCS_COP.1/SHA Cryptographic operation – Hash for Key Derivation by MRTD Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/SHA The TSF shall perform hashing in accordance with a specified cryptographic algo- rithm: SHA-1, SHA-224, SHA-2569 and cryptographic key sizes (none) that meet the following: FIPS 180-410 . PP application note 24: FCS_COP.1/SYM Cryptographic operation – Symmetric Encryption / Decryption Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/SYM The TSF shall perform secure messaging – encryption and decryption in accordance with a specified cryptographic algorithm: AES in CBC mode11 and cryptographic key size 128, 192 and 256 bit12 that meets the following: FIPS 19713 and [TR-03110]. PP application note 25: This SFR requires the TOE to implement the cryptographic primitives (AES) for se- cure messaging with encryption of the transmitted data. The keys are agreed between the TOE and the terminal as part of the Chip Authentication Protocol according to the FCS_CKM.1. Furthermore the SFR is used for authentication attempts of a terminal as Personalization Agent by means of the symmetric authen- tication mechanism. 9 [assignment: cryptographic algorithms] 10 [assignment: list of standards] 11 [assignment: cryptographic algorithm] 12 [assignment: cryptographic key sizes] 13 [assignment: list of standards] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 53 of 97 FCS_COP.1/MAC Cryptographic operation – MAC Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/MAC The TSF shall perform secure messaging – message authentication code in accord- ance with a specified cryptographic algorithm: AES-CMAC14 and cryptographic key size 128, 192 and 256 bit15 that meets the following: [TR-03110]. PP application note 26: This SFR requires the TOE to implement the cryptographic primitive for secure mes- saging with encryption and message authentication code over the transmitted data. The key is agreed be- tween the TSF by Chip Authentication Protocol according to the FCS_CKM.1. The Retail-MAC as part of the Basic Access Control Authentication Mechanism according to the FCS_CKM.1 (cf. [PP0055]) is DES resp. two- key Triple-DES base. FCS_COP.1/SIG_VER Cryptographic operation – Signature verification by MRTD Hierarchical to: No other components. Dependencies: [FDP_ITC.1 Import of user data without security attributes, or FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] FCS_CKM.4 Cryptographic key destruction FCS_COP.1.1/SIG_VER The TSF shall perform digital signature verification in accordance with a specified cryptographic algorithm: ECDSA with hash functions SHA-1, SHA-224 and SHA- 25616 and cryptographic key sizes of 160, 192, 224, 256 and 320 bit17 that meet the following: ISO15946 with the domain parameters provided in NIST DSS standard FIPS 186-3 [FIPS186-3] Appendix D or in Brainpool ECC Standard Curves [Brain- pool] chapters 3.1 to 3.5.18 PP application note 27: 6.2.2.2 Random Number Generation (FCS_RND.1) The TOE shall meet the requirement “Quality metric for random numbers (FCS_RND.1)” as specified below (Common Criteria Part 2 extended). FCS_RND.1 Quality metric for random numbers Hierarchical to: No other components. 14 [assignment: cryptographic algorithm] 15 [assignment: cryptographic key sizes] 16 [assignment: cryptographic algorithm] 17 [assignment: cryptographic key sizes] 18 [assignment: list of standards] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 54 of 97 Dependencies: No dependencies. FCS_RND.1.1 The TSF shall provide a mechanism to generate random numbers that meet the AIS20 Class DRG.3 quality metric19 . PP application note 28: This SFR requires the TOE to generate random numbers used for the authentication protocols as required by FIA_UAU.4. Developer note: The corresponding platform SFR (FCS_RNG.1) states that the platform provides a deter- ministic random number generator that implements AIS20 [AIS20] class DRG.3. If initialized with a random seed using the PTRNG of the HW platform conform to class P2 in AIS31, the internal state of the RNG shall have at least 100 bit MIN entropy. The RNG provides forward secrecy and enhanced backward secrecy. Initialized with a random seed - initialization is initiated at startup when the first APDU is received using the PTRNG of the HW platform conform to class P2 in [AIS31] - generates output for which 235 strings of bit length 128 are mutually different with probability above 1-2-37 . 6.2.3 Class FIA Identification and Authentication PP application note 29: The following Table 11 gives an overview on the authentication mechanisms used: Name SFR for the TOE Symmetric Authentication Mechanism for Personalization Agents FIA_UAU.4 Chip Authentication Protocol FIA_API.1 FIA_UAU.5 FIA_UAU.6 Terminal Authentication Protocol FIA_UAU.5 Active Authentication Protocol FIA_API.1/AA Table 11: Overview on authentication SFR Note the Chip Authentication Protocol as defined in this security target includes  the BAC authentication protocol as defined in ‘ICAO Doc 9303’ [ICAODoc] in order to gain access to the Chip Authentication Public Key in EF.DG14,  the asymmetric key agreement to establish symmetric secure messaging keys between the TOE and the terminal based on the Chip Authentication Public Key and the Terminal Public Key used later in the Terminal Authentication Protocol,  the check whether the TOE is able to generate the correct message authentication code with the expected key for any message received by the terminal. The BAC mechanism does not provide a security function on its own. The Chip Authentication Protocol may be used independent of the Terminal Authentication Protocol. But if the Terminal Authentication Protocol is used the terminal shall use the same public key as presented during the Chip Authentication Protocol. Please note that Active Authentication was added to this Security Target as an additional optional authen- tication mechanism. 19 [assignment: a defined quality metric] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 55 of 97 The TOE shall meet the requirement “Timing of identification (FIA_UID.1)” as specified below (Common Criteria Part 2). FIA_UID.1 Timing of identification Hierarchical to: No other components. Dependencies: No dependencies. FIA_UID.1.1 The TSF shall allow 1. to establish the communication channel, 2. to read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS 3. to carry out the Chip Authentication Protocol on behalf of the user to be per- formed before the user is identified. FIA_UID.1.2 The TSF shall require each user to be successfully identified before allowing any other TSF-mediated actions on behalf of that user. PP application note 30: In the Phase 2 “Manufacturing of the TOE” the Manufacturer is the only user role known to the TOE which writes the Initialization Data and/or Pre-personalization Data in the audit records of the IC. The MRTD manufacturer may create the user role Personalization Agent for transition from Phase 2 to Phase 3 “Personalization of the MRTD”. The users in role Personalization Agent identify themselves by means of selecting the authentication key. After personalization in the Phase 3 the Document Basic Access Keys, the Chip Authentication data and Terminal Authentication Reference Data are written into the TOE. The Basic Inspection System (cf. PP MRTD BAC [PP0055]) is identified as default user after power up or reset of the TOE i.e. the TOE will use the Document Basic Access Key to run the BAC Authentication Protocol, to gain access to the Chip Authentication Reference Data and to run the Chip Authentication Protocol (i.e. the BAC mechanism is not seen as an independent mechanism in this security target, it is a mandatory part within the Chip Authentication Protocol, and thus noted here for reasons of completeness). After successful authentication of the chip the terminal may identify itself as (i) Extended Inspection System by selection of the templates for the Terminal Authentication Protocol or (ii) if necessary and available by symmetric au- thentication as Personalization Agent (using the Personalization Agent Key). The TOE shall meet the requirement “Timing of authentication (FIA_UAU.1)” as specified below (Common Criteria Part 2). FIA_UAU.1 Timing of authentication Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification. FIA_UAU.1.1 The TSF shall allow 1. to establish the communication channel, 2. to read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS, 3. to identify themselves by selection of the authentication key 4. to carry out the Chip Authentication Protocol on behalf of the user to be performed before the user is authenticated. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 56 of 97 FIA_UAU.1.2 The TSF shall require each user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that user. The TOE shall meet the requirements of “Single-use authentication mechanisms (FIA_UAU.4)” as specified below (Common Criteria Part 2). FIA_UAU.4 Single-use authentication mechanisms - Single-use authentication of the Terminal by the TOE Hierarchical to: No other components. Dependencies: No dependencies. FIA_UAU.4.1 The TSF shall prevent reuse of authentication data related to 1. Terminal Authentication Protocol, 2. Authentication Mechanism based on AES20 PP application note 31: The authentication mechanisms may use either a challenge freshly and randomly generated by the TOE to prevent reuse of a response generated by a terminal in a successful authentication attempt. However, the authentication of Personalisation Agent may rely on other mechanisms ensuring protection against replay attacks, such as the use of an internal counter as a diversifier. The TOE shall meet the requirement “Multiple authentication mechanisms (FIA_UAU.5)” as specified below (Common Criteria Part 2). FIA_UAU.5 Multiple authentication mechanisms Hierarchical to: No other components. Dependencies: No dependencies. FIA_UAU.5.1 The TSF shall provide 1. Terminal Authentication Protocol, 2. Secure messaging in MAC-ENC mode, 3. Symmetric Authentication Mechanism based on AES21 to support user authentication. FIA_UAU.5.2 The TSF shall authenticate any user’s claimed identity according to the following rules: 1. The TOE accepts the authentication attempt as Personalization Agent by the Symmetric Authentication Mechanism with Personalization Agent Key22 . 2. After run of the Chip Authentication Protocol the TOE accepts only received commands with correct message authentication code sent by means of secure messaging with key agreed with the terminal by means of the Chip Authentication Mechanism. 3. The TOE accepts the authentication attempt by means of the Terminal Authen- tication Protocol only if the terminal uses the public key presented during the Chip 20 [assignment: identified authentication algorithms] 21 [assignment: identified authentication algorithms] 22 [selection: the Symmetric Authentication Mechanism with Personalization Agent Key] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 57 of 97 Authentication Protocol and the secure messaging established by the Chip Au- thentication Mechanism. PP application note 32: Depending on the authentication methods used the Personalization Agent holds (i) a key for the Symmetric Authentication Mechanism or (ii) an asymmetric key pair for the Terminal Authen- tication Protocol (e.g. provided by the Extended Access Control PKI in a valid card verifiable certificate with appropriate encoded access rights). The Basic Access Control Mechanism includes the secure messaging for all commands exchanged after successful authentication of the inspection system. The Personalization Agent may use Symmetric Authentication Mechanism without secure messaging mechanism as well if the personalization environment prevents eavesdropping to the communication between TOE and personali- zation terminal. The Basic Inspection System shall use the Basic Access Control Authentication Mechanism with the Document Basic Access Keys and the secure messaging after the mutual authentication. The Gen- eral Inspection System shall use the secure messaging with the keys generated by the Chip Authentication Mechanism. The TOE shall meet the requirement “Re-authenticating (FIA_UAU.6)” as specified below (Common Criteria Part 2). FIA_UAU.6 Re-authenticating – Re-authenticating of Terminal by the TOE Hierarchical to: No other components. Dependencies: No dependencies. FIA_UAU.6.1 The TSF shall re-authenticate the user under the conditions each command sent to the TOE after successful run of the Chip Authentication Protocol shall be verified as being sent by the GIS. PP application note 33: The Basic Access Control Mechanism and the Chip Authentication Protocol specified in [ICAODoc] include secure messaging for all commands exchanged after successful authentication of the Inspection System. The TOE checks by secure messaging in MAC_ENC mode each command based on CMAC, Retail-MAC or EMAC whether it was sent by the successfully authenticated terminal (see FCS_COP.1/MAC for further details). The TOE does not execute any command with incorrect message authentication code. Therefore the TOE reauthenticates the user for each received command and accepts only those commands received from the previously authenticated user. The TOE shall meet the requirement “Authentication Proof of Identity (FIA_API.1)” as specified below (Com- mon Criteria Part 2 extended). FIA_API.1 Authentication Proof of Identity Hierarchical to: No other components. Dependencies: No dependencies. FIA_API.1.1 The TSF shall provide a Chip Authentication Protocol according to [TR-03110] to prove the identity of the TOE. PP application note 34: This SFR requires the TOE to implement the Chip Authentication Mechanism spec- ified in [TR-03110]. The TOE and the terminal generate a shared secret using the Diffie-Hellman Protocol (DH or EC-DH) and two session keys for secure messaging in ENC_MAC mode according to [ICAODoc], nor- mative appendix 5, A5.1. The terminal verifies by means of secure messaging whether the MRTD’s chip was cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 58 of 97 able or not to run his protocol properly using its Chip Authentication Private Key corresponding to the Chip Authentication Key (EF.DG14). The following SFR was added: FIA_API.1/AA Authentication Proof of Identity – MRTD Hierarchical to: No other components. Dependencies: No dependencies. FIA_API.1.1/AA The TSF shall provide a Active Authentication Mechanism according to [ICAODoc]23 to prove the identity of the TOE24 . 6.2.4 Class FDP User Data Protection The TOE shall meet the requirement “Subset access control (FDP_ACC.1)” as specified below (Common Cri- teria Part 2). FDP_ACC.1 Subset access control Hierarchical to: No other components. Dependencies: FDP_ACF.1 Security attribute based access control FDP_ACC.1.1 The TSF shall enforce the Access Control SFP on terminals gaining write, read and modification access to data in the EF.COM, EF.SOD, EF.DG1 to EF.DG16 of the log- ical MRTD. The TOE shall meet the requirement “Security attribute based access control (FDP_ACF.1)” as specified be- low (Common Criteria Part 2). FDP_ACF.1 Security attribute based access control Hierarchical to: No other components. Dependencies: FDP_ACC.1 Subset access control FMT_MSA.3 Static attribute initialization FDP_ACF.1.1 The TSF shall enforce the Access Control SFP to objects based on the following: 1. Subjects: a. Personalization Agent, b. Extended Inspection System c. Terminal, 2. Objects: a. data EF.DG1, EF.DG2 and EF.DG5 to EF.DG16 of the logical MRTD, b. data EF.DG3 and EF.DG4 of the logical MRTD c. data in EF.COM, d. data in EF.SOD, 23 [assignment: authentication mechanism] 24 [assignment: authorized user or role] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 59 of 97 3. Security attributes: a. authentication status of terminals, b. Terminal Authorization. FDP_ACF.1.2 The TSF shall enforce the following rules to determine if an operation among con- trolled subjects and controlled objects is allowed: 1. the successfully authenticated Personalization Agent is allowed to write and to read the data of the EF.COM, EF.SOD, EF.DG1 to EF.DG16 of the logical MRTD, 2. the successfully authenticated Extended Inspection System with the Read ac- cess to DG 3 (Fingerprint) granted by the relative certificate holder authoriza- tion encoding is allowed to read the data in EF.DG3 of the logical MRTD. 3. the successfully authenticated Extended Inspection System with the Read ac- cess to DG 4 (Iris) granted by the relative certificate holder authorization en- coding is allowed to read the data in EF.DG4 of the logical MRTD. FDP_ACF.1.3 The TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4 The TSF shall explicitly deny access of subjects to objects based on the rule: 1. A terminal authenticated as CVCA is not allowed to read data in the EF.DG3, 2. A terminal authenticated as CVCA is not allowed to read data in the EF.DG4, 3. A terminal authenticated as DV is not allowed to read data in the EF.DG3, 4. A terminal authenticated as DV is not allowed to read data in the EF.DG4, 5. Any terminal is not allowed to modify any of the EF.DG1 to EF.DG16 of the logical MRTD, 6. Any terminal not being successfully authenticated as Extended Inspection Sys- tem is not allowed to read any of the EF.DG3 to EF.DG4 of the logical MRTD. PP application note 35: The relative certificate holder authorization encoded in the CVC of the inspection system is defined in [TR-03110], Annex A.5.1, table A.8. The TOE verifies the certificate chain established by the Country Verifying Certification Authority, the Document Verifier Certificate and the Inspection System Certificate (cf. FMT_MTD.3). The Terminal Authorization is the intersection of the Certificate Holder Author- ization in the certificates of the Country Verifying Certification Authority, the Document Verifier Certificate and the Inspection System Certificate in a valid certificate chain. PP application note 36: Note that the BAC mechanism controls the read access of the EF.COM, EF.SOD, EF.DG1, EF.DG2, EF.DG5 to EF.DG16 of the logical MRTD. According to P.BAC-PP these security features of the MRTD are not subject of this security target. The TOE shall meet the requirement “Basic data exchange confidentiality (FDP_UCT.1)” as specified below (Common Criteria Part 2). FDP_UCT.1 Basic data exchange confidentiality Hierarchical to: No other components. Dependencies: FTP_ITC.1 Inter-TSF trusted channel, or FTP_TRP.1 Trusted path] [FDP_ACC.1 Subset access control, or cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 60 of 97 FDP_IFC.1 Subset information flow control] FDP_UCT.1.1 The TSF shall enforce the Access Control SFP to be able to transmit and receive user data in a manner protected from unauthorized disclosure after Chip Authentica- tion. The TOE shall meet the requirement “Data exchange integrity (FDP_UIT.1)” as specified below (Common Criteria Part 2). FDP_UIT.1 Data exchange integrity Hierarchical to: No other components. Dependencies: [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] [FTP_ITC.1 Inter-TSF trusted channel, or FTP_TRP.1 Trusted path] FDP_UIT.1.1 The TSF shall enforce the Access Control SFP to be able to transmit and receive user data in a manner protected from modification, deletion, insertion and replay errors after Chip Authentication. FDP_UIT.1.2 The TSF shall be able to determine on receipt of user data, whether modification, deletion, insertion and replay has occurred after Chip Authentication. Rationale for Refinement in the PP: Note that the Access Control SFP (cf. FDP_ACF.1.2) allows the Extended Inspection System (as of [ICAODoc] and [PP0055]) to access the data EF.COM, EF.SOD, EF.DG1, EF.DG2 and EF.DG5 to EF.DG16 of the logical MRTD. Nevertheless there is explicitly no rule for preventing access to these data. More over their data integrity (cf. FDP_UIT.1) and confidentiality (cf. FDP_UCT.1) is ensured by the BAC mechanism being addressed and covered by [PP0055]. The fact that the BAC mechanism is not part of the security target in hand is addressed by the refinement “after Chip Authentication”. PP application note 37: FDP_UCT.1 and FDP_UIT.1 require the protection of the User Data transmitted from the TOE to the terminal by secure messaging with encryption and message authentication codes after suc- cessful Chip Authentication to the General Inspection System. The authentication mechanism as part of Basic Access Control Mechanism and the Chip Authentication Protocol establish different key sets to be used for secure messaging (each set of keys for the encryption and the message authentication key). 6.2.5 Class FMT Security Management PP application note 38: The SFR FMT_SMF.1 and FMT_SMR.1 provide basic requirements to the manage- ment of the TSF data. The TOE shall meet the requirement “Specification of Management Functions (FMT_SMF.1)” as specified below (Common Criteria Part 2). FMT_SMF.1 Specification of Management Functions Hierarchical to: No other components. Dependencies: No Dependencies FMT_SMF.1.1 The TSF shall be capable of performing the following management functions: 1. Initialization , 2. Pre-personalization , cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 61 of 97 3. Personalization. The TOE shall meet the requirement “Security roles (FMT_SMR.1)” as specified below (Common Criteria Part 2). FMT_SMR.1 Security roles Hierarchical to: No other components. Dependencies: FIA_UID.1 Timing of identification. FMT_SMR.1.1 The TSF shall maintain the roles 1. Manufacturer , 2. Personalization Agent , 3. Country Verifying Certification Authority, 4. Document Verifier, 5. domestic Extended Inspection System 6. foreign Extended Inspection System. FMT_SMR.1.2 The TSF shall be able to associate users with roles. PP application note 39: Note that the MRTD also maintains the role Basic Inspection System due to a direct consequence of P.BAC-PP resp. OE.BAC-PP. Nevertheless this role is not explicitly listed in FMT_SMR.1.1, above since the TSF cannot maintain the role with respect to the assumed high attack potential due to the known weaknesses of the Document Basic Access Keys. PP application note 40: The SFR FMT_LIM.1 and FMT_LIM.2 address the management of the TSF and TSF data to prevent misuse of test features of the TOE over the life cycle phases. The TOE shall meet the requirement “Limited capabilities (FMT_LIM.1)” as specified below (Common Crite- ria Part 2 extended). FMT_LIM.1 Limited capabilities Hierarchical to: No other components. Dependencies: FMT_LIM.2 Limited availability. FMT_LIM.1.1 The TSF shall be designed in a manner that limits their capabilities so that in con- junction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow, 1. User Data to be manipulated, 2. sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, 3. TSF data to be disclosed or manipulated 4. software to be reconstructed and 5. substantial information about construction of TSF to be gathered which may enable other attacks The TOE shall meet the requirement “Limited availability (FMT_LIM.2)” as specified below (Common Criteria Part 2 extended). cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 62 of 97 FMT_LIM.2 Limited availability Hierarchical to: No other components. Dependencies: FMT_LIM.1 Limited capabilities. FMT_LIM.2.1 The TSF shall be designed in a manner that limits their availability so that in con- junction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow 1. User Data to be manipulated, 2. sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, 3. TSF data to be disclosed or manipulated 4. software to be reconstructed and 5. substantial information about construction of TSF to be gathered which may enable other attacks. PP application note 41: The formulation of “Deploying Test Features …” in FMT_LIM.2.1 might be a little bit misleading since the addressed features are no longer available (e.g. by disabling or removing the respective functionality). Nevertheless the combination of FMT_LIM.1 and FMT_LIM.2 is introduced provide an op- tional approach to enforce the same policy. Note that the term “software” in item 4 of FMT_LIM.1.1 and FMT_LIM.2.1 refers to both IC Dedicated and IC Embedded Software. PP application note 42: The following SFR are iterations of the component Management of TSF data (FMT_MTD.1). The TSF data include but are not limited to those identified below. The TOE shall meet the requirement “Management of TSF data (FMT_MTD.1)” as specified below (Common Criteria Part 2). The iterations address different management functions and different TSF data. FMT_MTD.1/INI_ENA Management of TSF data – Writing of Initialization Data and Prepersonalization Data Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/INI_ENA The TSF shall restrict the ability to write the Initialization Data and Preper- sonalization Data to the Manufacturer. PP application note 43: The pre-personalization Data includes but is not limited to the authentication ref- erence data for the Personalization Agent which is the symmetric cryptographic Personalization Agent Key. FMT_MTD.1/INI_DIS Management of TSF data – Disabling of Read Access to Initialization Data and Pre- personalization Data Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/INI_DIS The TSF shall restrict the ability to disable read access for users to the Ini- tialization Data to the Personalization Agent. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 63 of 97 PP application note 44: According to P.Manufact the IC Manufacturer and the MRTD Manufacturer are the default users assumed by the TOE in the role Manufacturer during the Phase 2 “Manufacturing” but the TOE is not requested to distinguish between these users within the role Manufacturer. The TOE may restrict the ability to write the Initialization Data and the Prepersonalization Data by (i) allowing to write these data only once and (ii) blocking the role Manufacturer at the end of the Phase 2. The IC Manufacturer may write the Initialization Data which includes but are not limited to the IC Identifier as required by FAU_SAS.1. The Initialization Data provides a unique identification of the IC which is used to trace the IC in the Phase 2 and 3 “personalization” but is not needed and may be misused in the Phase 4 “Operational Use”. Therefore the external read access shall be blocked. The MRTD Manufacturer will write the Pre-personalization Data. FMT_MTD.1/CVCA_INI Management of TSF data – Initialization of CVCA Certificate and Current Date Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/CVCA_INI The TSF shall restrict the ability to write the 1. initial Country Verifying Certification Authority Public Key, 2. initial Country Verifying Certification Authority Certificate, 3. initial Current Date to the Personalization Agent25 . PP application note 45: FMT_MTD.1/CVCA_UPD Management of TSF data – Country Verifying Certification Authority Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/CVCA_UPD The TSF shall restrict the ability to update the 1. Country Verifying Certification Authority Public Key, 2. Country Verifying Certification Authority Certificate to Country Verifying Certification Authority. PP application note 46: The Country Verifying Certification Authority updates its asymmetric key pair and distributes the public key be means of the Country Verifying CA Link-Certificates (cf. [TR-03110], sec. 2.2). The TOE updates its internal trust-point if a valid Country Verifying CA Link-Certificates (cf. FMT_MTD.3) is provided by the terminal (cf. [TR-03110], sec. 2.2.3 and 2.2.4). FMT_MTD.1/DATE Management of TSF data – Current date Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions 25 [assignment: the authorized identified roles] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 64 of 97 FMT_SMR.1 Security roles FMT_MTD.1.1/DATE The TSF shall restrict the ability to modify the Current date to 1. Country Verifying Certification Authority, 2. Document Verifier, 3. Domestic Extended Inspection System. PP application note 47: The authorized roles are identified in their certificate (cf. [TR-03110], sec. 2.2.4 and Table A.5) and authorized by validation of the certificate chain (cf. FMT_MTD.3). The authorized role of the terminal is part of the Certificate Holder Authorization in the card verifiable certificate provided by the ter- minal for the identification and the Terminal Authentication (cf. to [TR-03110], annex A.3.3, for details). FMT_MTD.1/KEY_WRITE Management of TSF data – Key Write Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/KEY_WRITE The TSF shall restrict the ability to write the Document Basic Access Keys to the Personalization Agent. PP application note 48: The Country Verifying Certification Authority Public Key is the TSF data for verifica- tion of the certificates of the Document Verifier and the Extended Inspection Systems including the access rights for the Extended Access Control. FMT_MTD.1/CAPK Management of TSF data – Chip Authentication Private Key Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/CAPK The TSF shall restrict the ability to load26 the Chip Authentication Private Key to the Personalization Agent27 . The following SFR was added: FMT_MTD.1/AAPK Management of TSF data – Active Authentication Private Key Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/AAPK The TSF shall restrict the ability to create, load28 the Active Authentication Private Key to the Manufacturer and the Personalization Agent.29 26 [selection: create, load] 27 [assignment: the authorised identified roles] 28 [selection: create, load] 29 [assignment: the authorised identified roles] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 65 of 97 PP application note 49: FMT_MTD.1/KEY_READ Management of TSF data – Key Read Hierarchical to: No other components. Dependencies: FMT_SMF.1 Specification of management functions FMT_SMR.1 Security roles FMT_MTD.1.1/KEY_READ The TSF shall restrict the ability to read the 1. Document Basic Access Keys, 2. Chip Authentication Private Key, 3. Personalization Agent Keys 4. Active Authentication Private Key to: none. The TOE shall meet the requirement “Secure TSF data (FMT_MTD.3)” as specified below (Common Criteria Part 2): FMT_MTD.3 Secure TSF data Hierarchical to: No other components. Dependencies: FMT_MTD.1 Management of TSF data FMT_MTD.3.1 The TSF shall ensure that only secure values of the certificate chain are ac- cepted for TSF data of the Terminal Authentication Protocol and the Ac- cess Control. Refinement: The certificate chain is valid if and only if 1. the digital signature of the Inspection System Certificate can be verified as correct with the public key of the Document Verifier Certificate and the expiration date of the Inspection System Certif- icate is not before the Current Date of the TOE, 2. the digital signature of the Document Verifier Certificate can be verified as correct´with the public key in the Certificate of the Country Verifying Certification Authority and the expiration date of the Document Verifier Certificate is not before the Current Date of the TOE, 3. the digital signature of the Certificate of the Country Verifying Certification Authority can be ver- ified as correct with the public key of the Country Verifying Certification Authority known to the TOE and the expiration date of the Certificate of the Country Verifying Certification Authority is not before the Current Date of the TOE. The Inspection System Public Key contained in the Inspection System Certificate in a valid certificate chain is a secure value for the authentication reference data of the Extended Inspection System. The intersection of the Certificate Holder Authorizations contained in the certificates of a valid certificate chain is a secure value for Terminal Authorization of a successful authenticated Extended Inspection Sys- tem. PP application note 50: The Terminal Authentication is used for Extended Inspection System as required by FIA_UAU.4 and FIA_UAU.5. The Terminal Authorization is used as TSF data for access control required by FDP_ACF.1. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 66 of 97 6.2.6 Class FPT Protection of the Security Functions The TOE shall prevent inherent and forced illicit information leakage for User Data and TSF Data. The secu- rity functional requirement FPT_EMSEC.1 addresses the inherent leakage. With respect to the forced leak- age they have to be considered in combination with the security functional requirements “Failure with preservation of secure state (FPT_FLS.1)” and “TSF testing (FPT_TST.1)” on the one hand and “Resistance to physical attack (FPT_PHP.3)” on the other. The SFRs “Limited capabilities (FMT_LIM.1)”, “Limited availability (FMT_LIM.2)” and “Resistance to physical attack (FPT_PHP.3)” together with the SAR “Security architecture description” (ADV_ARC.1) prevent bypassing, deactivation and manipulation of the security features or mis- use of TOE functions. The TOE shall meet the requirement “TOE Emanation (FPT_EMSEC.1)” as specified below (Common Criteria Part 2 extended): FPT_EMSEC.1 TOE Emanation Hierarchical to: No other components. Dependencies: No Dependencies. FPT_EMSEC.1.1 The TOE shall not emit variations in power consumption or timing during com- mand execution30 in excess of non-useful information31 enabling access to Person- alization Agent Keys and Chip Authentication Private Key32 and none33 . FPT_EMSEC.1.2 The TSF shall ensure any users are unable to use the following interface: smart card circuit contacts or contactless interface34 to gain access to Personalization Agent Key(s) and Chip Authentication Private Key35 and logical MRTD data and Active Authentication Private Key and none36 . PP application note 51: The following security functional requirements address the protection against forced illicit information leak- age including physical manipulation. The TOE shall meet the requirement “Failure with preservation of secure state (FPT_FLS.1)” as specified below (Common Criteria Part 2). FPT_FLS.1 Failure with preservation of secure state Hierarchical to: No other components. Dependencies: No Dependencies. FPT_FLS.1.1 The TSF shall preserve a secure state when the following types of failures occur: 30 [assignment: types of emissions] 31 [assignment: specified limits] 32 [assignment: list of types of user data] 33 [assignment: list oftypes of user data]. 34 [assignment: type of connection] 35 [assignment: list of types of TSF data] 36 [assignment: list oftypes of user data]. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 67 of 97 1. Exposure to out-of-range operating conditions where therefore a malfunction could occur, 2. Failure detected by TSF according to FPT_TST.1. The TOE shall meet the requirement “TSF testing (FPT_TST.1)” as specified below (Common Criteria Part 2). FPT_TST.1 TSF testing Hierarchical to: No other components. Dependencies: No Dependencies. FPT_TST.1.1 The TSF shall run a suite of self tests during initial start-up37 to demonstrate the correct operation of the TSF. FPT_TST.1.2 The TSF shall provide authorised users with the capability to verify the integrity of TSF data. FPT_TST.1.3 The TSF shall provide authorised users with the capability to verify the integrity of stored TSF executable code. PP application note 52: The TOE shall meet the requirement “Resistance to physical attack (FPT_PHP.3)” as specified below (Com- mon Criteria Part 2). FPT_PHP.3 Resistance to physical attack Hierarchical to: No other components. Dependencies: No dependencies. FPT_PHP.3.1 The TSF shall resist physical manipulation and physical probing to the TSF by re- sponding automatically such that the SFRs are always enforced. PP application note 53: The TOE will implement appropriate measures to continuously counter physical manipulation and physical probing. Due to the nature of these attacks (especially manipulation) the TOE can by no means detect attacks on all of its elements. Therefore, permanent protection against these at- tacks is required ensuring that the TSP could not be violated at any time. Hence, “automatic response” means here (i) assuming that there might be an attack at any time and (ii) countermeasures are provided at any time. PP application note 54: The SFRs “Non-bypassability of the TSF FPT_RVM.1” and “TSF domain separation FPT_SEP.1” are no longer part of [2]. These requirements are now an implicit part of the assurance require- ment ADV_ARC.1. 6.3 Security Assurance Requirements for the TOE The requirements for the evaluation of the TOE and its development and operating environment are those taken from the 37 [selection: during initial start-up, periodically during normal operation, at the request of the authorised user, at the conditions [assignment: conditions under which self test should occur]] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 68 of 97 Evaluation Assurance Level 4 (EAL4) and augmented by taking the following components: ALC_DVS.2 and AVA_VAN.5. PP application note 55: The TOE shall protect the assets against high attack potential under the assumption that the inspection system will prevent eavesdropping to their communication with the TOE before secure messaging is successfully established based on the Chip Authentication Protocol (OE.Prot_Logical_MRTD). Otherwise the confidentiality of the standard data shall be protected against attacker with at least En- hanced-Basic attack potential (AVA_VAN.3). 6.4 Security Requirements Rationale 6.4.1 Security Functional Requirements Rationale The following table provides an overview for security functional requirements coverage. OT.AC_Pers OT.Data_Int OT.Sens_Data_Conf OT.Identification OT.Chip_Auth_Proof OT.Prot_Abuse-Func OT.Prot_Inf_Leak OT.Prot_Phys-Tamper OT.Prot_Malfuntion FAU_SAS.1 x FCS_CKM.1 x x x x FCS_CKM.4 x x x FCS_COP.1/SHA x x x x FCS_COP.1/SYM x x x x FCS_COP.1/MAC x x x x FCS_COP.1/SIG_VER x x FCS_RND.1 x x FIA_UID.1 x x x FIA_UAU.1 x x x FIA_UAU.4 x x x FIA_UAU.5 x x x FIA_UAU.6 x x x FIA_API.1 x FIA_API.1/AA x FDP_ACC.1 x x x FDP_ACF.1 x x x FDP_UCT.1 x cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 69 of 97 OT.AC_Pers OT.Data_Int OT.Sens_Data_Conf OT.Identification OT.Chip_Auth_Proof OT.Prot_Abuse-Func OT.Prot_Inf_Leak OT.Prot_Phys-Tamper OT.Prot_Malfuntion FDP_UIT.1 x FMT_SMF.1 x x FMT_SMR.1 x x FMT_LIM.1 x FMT_LIM.2 x FMT_MTD.1/INI_ENA x FMT_MTD.1/INI_DIS x FMT_MTD.1/CVCA_INI x FMT_MTD.1/CVCA_UPD x FMT_MTD.1/DATE x FMT_MTD.1/KEY_WRITE x FMT_MTD.1/CAPK x x x FMT_MTD.1/AAPK x FMT_MTD.1/KEY_READ x x x x FMT_MTD.3 x FPT_EMSEC.1 x x FPT_TST.1 x x FPT_FLS.1 x x FPT_PHP.3 x x Table 12: Overview of the security functional requirements coverage. The security objective OT.AC_Pers “Access Control for Personalization of logical MRTD” addresses the ac- cess control of the writing the logical MRTD. The write access to the logical MRTD data are defined by the SFR FIA_UID.1, FIA_UAU.1, FDP_ACC.1 and FDP_ACF.1 in the same way: only the successfully authenticated Personalization Agent is allowed to write the data of the groups EF.DG1 to EF.DG16 of the logical MRTD only once. The SFR FMT_SMR.1 lists the roles (including Personalization Agent) and the SFR FMT_SMF.1 lists the TSF management functions (including Personalization). The Personalization Agent handles the Document Basic Access Keys according to the SFR FMT_MTD.1/KEY_WRITE as authentication reference data for Basic Access Control. The authentication of the terminal as Personalization Agent shall be performed by TSF according to SRF FIA_UAU.4 and FIA_UAU.5. If the Personalization Terminal want to authenticate itself to the TOE by means of the Terminal Authentication Protocol (after Chip Authentication) with the Personalization Agent Keys the TOE will use TSF according to the FCS_RND.1 (for the generation of the challenge), FCS_CKM.1, FCS_COP.1/SHA (for the derivation of the new session keys after Chip Authentication), and FCS_COP.1/SYM and FCS_COP.1/MAC (for the ENC_MAC_Mode secure messaging), FCS_COP.1/SIG_VER (as part of the Ter- minal Authentication Protocol) and FIA_UAU.6 (for the re-authentication). If the Personalization Terminal cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 70 of 97 wants to authenticate itself to the TOE by means of the Symmetric Authentication Mechanism with Person- alization Agent Key the TOE will use TSF according to the FCS_RND.1 (for the generation of the challenge) and FCS_COP.1/SYM (to verify the authentication attempt). The session keys are destroyed according to FCS_CKM.4 after use. The SFR FMT_MTD.1/KEY_READ prevents read access to the secret key of the Personalization Agent Keys and ensures together with the SFR FPT_EMSEC.1 the confidentially of these keys. The security objective OT.Data_Int “Integrity of personal data” requires the TOE to protect the integrity of the logical MRTD stored on the MRTD’s chip against physical manipulation and unauthorized writing. The write access to the logical MRTD data is defined by the SFR FDP_ACC.1 and FDP_ACF.1 in the same way: only the Personalization Agent is allowed to write the data in EF.DG1 to EF.DG16 of the logical MRTD (FDP_ACF.1.2, rule 1) and terminals are not allowed to modify any of the data in EF.DG1 to EF.DG16 of the logical MRTD (cf. FDP_ACF.1.4). The Personalization Agent must identify and authenticate themselves ac- cording to FIA_UID.1 and FIA_UAU.1 before accessing these data. The SFR FMT_SMR.1 lists the roles and the SFR FMT_SMF.1 lists the TSF management functions. The TOE supports the inspection system detect any modification of the transmitted logical MRTD data after Chip Authentication. The authentication of the terminal as Personalization Agent shall be performed by TSF according to SRF FIA_UAU.4, FIA_UAU.5 and FIA_UAU.6. The SFR FIA_UAU.6 and FDP_UIT.1 requires the integrity protection of the transmitted data after chip authentication by means of secure messaging imple- mented by the cryptographic functions according to FCS_CKM.1 (for the generation of shared secret), FCS_COP.1/SHA (for the derivation of the new session keys), and FCS_COP.1/SYM and FCS_COP.1/MAC for the ENC_MAC_Mode secure messaging. The session keys are destroyed according to FCS_CKM.4 after use. The SFR FMT_MTD.1/CAPK and FMT_MTD.1/KEY_READ requires that the Chip Authentication Key cannot be written unauthorized or read afterwards. The security objective OT.Sense_Data_Conf “Confidentiality of sensitive biometric reference data” is en- forced by the Access Control SFP defined in FDP_ACC.1 and FDP_ACF.1 allowing the data of EF.DG3 and EF.DG4 only to be read by successfully authenticated Extended Inspection System being authorized by a validly verifiable certificate according FCS_COP.1/SIG_VER. The SFR FIA_UID.1 and FIA_UAU.1 requires the identification and authentication of the inspection systems. The SFR FIA_UAU.5 requires the successful Chip Authentication (CA) before any authentication attempt as Extended Inspection System. During the protected communication following the CA the reuse of authenti- cation data is prevented by FIA_UAU.4. The SFR FIA_UAU.6 and FDP_UCT.1 requires the confidentiality pro- tection of the transmitted data after chip authentication by means of secure messaging implemented by the cryptographic functions according to FCS_RND.1 (for the generation of the terminal authentication chal- lenge), FCS_CKM.1 (for the generation of shared secret), FCS_COP.1/SHA (for the derivation of the new session keys), and FCS_COP.1/SYM and FCS_COP.1/MAC for the ENC_MAC_Mode secure messaging. The session keys are destroyed according to FCS_CKM.4 after use. The SFR FMT_MTD.1/CAPK and FMT_MTD.1/KEY_READ requires that the Chip Authentication Key cannot be written unauthorized or read afterwards. To allow a verification of the certificate chain as in FMT_MTD.3 the CVCA’s public key and certificate as well as the current date are written or update by authorized identified role as of FMT_MTD.1/CVCA_INI, FMT_MTD.1/CVCA_UPD and FMT_MTD.1/DATE. The security objective OT.Identification “Identification and Authentication of the TOE” address the storage of the IC Identification Data uniquely identifying the MRTD’s chip in its non-volatile memory. This will be ensured by TSF according to SFR FAU_SAS.1. The SFR FMT_MTD.1/INI_ENA allows only the Manufacturer to write Initialization Data and Pre-personali- zation Data (including the Personalization Agent key). The SFR FMT_MTD.1/INI_DIS allows the Personaliza- tion Agent to disable Initialization Data if their usage in the phase 4 “Operational Use” violates the security objective OT.Identification. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 71 of 97 The security objective OT.Chip_Auth_Proof “Proof of MRTD’s chip authenticity” is ensured by the Chip Au- thentication Protocol provided by FIA_API.1 proving the identity of the TOE. The Chip Authentication Pro- tocol defined by FCS_CKM.1 is performed using a TOE internally stored confidential private key as required by FMT_MTD.1/CAPK and FMT_MTD.1/KEY_READ. The Chip Authentication Protocol [TR-03110] requires additional TSF according to FCS_COP.1/SHA (for the derivation of the session keys), FCS_COP.1/SYM and FCS_COP.1/MAC (for the ENC_MAC_Mode secure messaging). It is also achieved by the optional Active Au- thentication defined by FIA_API.1/AA and FMT_MTD.1/AAPK. The security objective OT.Prot_Abuse-Func “Protection against Abuse of Functionality” is ensured by the SFR FMT_LIM.1 and FMT_LIM.2 which prevent misuse of test functionality of the TOE or other features which may not be used after TOE Delivery. The security objective OT.Prot_Inf_Leak “Protection against Information Leakage” requires the TOE to pro- tect confidential TSF data stored and/or processed in the MRTD’s chip against disclosure  by measurement and analysis of the shape and amplitude of signals or the time between events found by measuring signals on the electromagnetic field, power consumption, clock, or I/O lines which is addressed by the SFR FPT_EMSEC.1,  by forcing a malfunction of the TOE which is addressed by the SFR FPT_FLS.1 and FPT_TST.1, and/or  by a physical manipulation of the TOE which is addressed by the SFR FPT_PHP.3. The security objective OT.Prot_Phys-Tamper “Protection against Physical Tampering” is covered by the SFR FPT_PHP.3. The security objective OT.Prot_Malfunction “Protection against Malfunctions” is covered by (i) the SFR FPT_TST.1 which requires self tests to demonstrate the correct operation and tests of authorized users to verify the integrity of TSF data and TSF code, and (ii) the SFR FPT_FLS.1 which requires a secure state in case of detected failure or operating conditions possibly causing a malfunction. 6.4.2 Dependency Rationale The dependency analysis for the security functional requirements shows that the basis for mutual support and internal consistency between all defined functional requirements is satisfied. All dependencies between the chosen functional components are analyzed, and non-dissolved dependencies are appropriately ex- plained. The table shows the dependencies between the SFR of the TOE. SFR Dependencies Support of the Dependen- cies FAU_SAS.1 No dependencies n.a. FCS_CKM.1 [FCS_CKM.2 Cryptographic key distribution or FCS_COP.1 Cryptographic operation], FCS_CKM.4 Cryptographic key destruction Fulfilled by FCS_COP.1/SYM, and FCS_COP.1/MAC, Fulfilled by FCS_CKM.4 FCS_CKM.4 [FDP_ITC.1 Import of user data without secu- rity attributes, FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation] Fulfilled by FCS_CKM.1 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 72 of 97 SFR Dependencies Support of the Dependen- cies FCS_COP.1/SHA [FDP_ITC.1 Import of user data without secu- rity attributes, FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation], FCS_CKM.4 Cryptographic key destruction justification 1 for non-sat- isfied dependencies Fulfilled by FCS_CKM.4 FCS_COP.1/SYM [FDP_ITC.1 Import of user data without secu- rity attributes, FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation], FCS_CKM.4 Cryptographic key destruction Fulfilled by FCS_CKM.1, Fulfilled by FCS_CKM.4 FCS_COP.1/MAC [FDP_ITC.1 Import of user data without secu- rity attributes, FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation], FCS_CKM.4 Cryptographic key destruction Fulfilled by FCS_CKM.1 Fulfilled by FCS_CKM.4 FCS_COP.1/SIG_VER [FDP_ITC.1 Import of user data without secu- rity attributes, FDP_ITC.2 Import of user data with security attributes, or FCS_CKM.1 Cryptographic key generation], FCS_CKM.4 Cryptographic key destruction Fulfilled by FCS_CKM.1, Fulfilled by FCS_CKM.4 FCS_RND.1 No dependencies n.a. FIA_UID.1 No dependencies n.a. FIA_UAU.1 FIA_UID.1 Timing of identfication Fulfilled by FIA_UID.1 FIA_UAU.4 No dependencies n.a. FIA_UAU.5 No dependencies n.a. FIA_UAU.6 No dependencies n.a. FIA_API.1 No dependencies n.a. FIA_API.1/AA No dependencies n.a. FDP_ACC.1 FDP_ACF.1 Security attribute based access control Fulfilled by FDP_ACF.1 FDP_ACF.1 FDP_ACC.1 Subset access control, FMT_MSA.3 Static attribute initialization Fulfilled by FDP_ACC.1, justification 2 for non-sat- isfied dependencies cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 73 of 97 SFR Dependencies Support of the Dependen- cies FDP_UCT.1 [FTP_ITC.1 Inter-TSF trusted channel, or FTP_TRP.1 Trusted path], [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] justification 3 for non-sat- isfied dependencies Fulfilled by FDP_ACC.1 FDP_UIT.1 [FTP_ITC.1 Inter-TSF trusted channel, or FTP_TRP.1 Trusted path], [FDP_ACC.1 Subset access control, or FDP_IFC.1 Subset information flow control] justification 3 for non-sat- isfied dependencies Fulfilled by FDP_ACC.1 FMT_SMF.1 No dependencies. n.a. FMT_SMR.1 FIA_UID.1 Timing of identification Fulfilled by FIA_UID.1 FMT_LIM.1 FMT_LIM.2 Fulfilled by FMT_LIM.2 FMT_LIM.2 FMT_LIM.1 Fulfilled by FMT_LIM.1 FMT_MTD.1/INI_ENA FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/INI_DIS FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/CVCA_INI FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/CVCA_UPD FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/DATE FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/KEY_WRITE FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/CAPK FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/AAPK FMT_SMF.1 Specification of management functions, FMT_SMR.1 Security roles Fulfilled by FMT_SMF.1 Fulfilled by FMT_SMR.1 FMT_MTD.1/KEY_READ FMT_SMF.1 Specification of management functions, Fulfilled by FMT_SMF.1 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 74 of 97 SFR Dependencies Support of the Dependen- cies FMT_SMR.1 Security roles Fulfilled by FMT_SMR.1 FMT_MTD.3 FMT_MTD.1 Fulfilled by FMT_MTD.1/CVCA_INI and FMT_MTD.1/CVCA_UPD FPT_EMSEC.1 No dependencies n.a. FPT_TST.1 No dependencies n.a. FPT_FLS.1 No dependencies n.a. FPT_PHP.3 No dependencies n.a. Table 13: Overview of the dependencies between the SFR of the TOE. Justification for non-satisfied dependencies between the SFR for TOE:  No. 1: The hash algorithm required by the SFR FCS_COP.1/SHA does not need any key material. Therefore neither a key generation (FCS_CKM.1) nor an import (FDP_ITC.1/2) is necessary.  No. 2: The access control TSF according to FDP_ACF.1 uses security attributes which are defined during the personalization and are fixed over the whole life time of the TOE. No management of these security attribute (i.e. SFR FMT_MSA.1 and FMT_MSA.3) is necessary here.  No. 3: The SFR FDP_UCT.1 and FDP_UIT.1 require the use secure messaging between the MRTD and the GIS. There is no need for the SFR FTP_ITC.1, e.g. to require this communication channel to be logically distinct from other communication channels since there is only one channel. Since the TOE does not provide a direct human interface a trusted path as required by FTP_TRP.1 is not applicable here. 6.4.3 Security Assurance Requirements Rationale The EAL4 was chosen to permit a developer to gain maximum assurance from positive security engineering based on good commercial development practices which, though rigorous, do not require substantial spe- cialist knowledge, skills, and other resources. EAL4 is the highest level at which it is likely to be economically feasible to retrofit to an existing product line. EAL4 is applicable in those circumstances where developers or users require a moderate to high level of independently assured security in conventional commodity TOEs and are prepared to incur sensitive security specific engineering costs. The selection of the component ALC_DVS.2 provides a higher assurance of the security of the MRTD’s de- velopment and manufacturing especially for the secure handling of the MRTD’s material. The selection of the component AVA_VAN.5 provides a higher assurance of the security by vulnerability analysis to assess the resistance to penetration attacks performed by an attacker possessing a high attack potential. This vulnerability analysis is necessary to fulfill the security objectives OT.Sens_Data_Conf and OT.Chip_Auth_Proof. The component ALC_DVS.2 has no dependencies. The component AVA_VAN.5 has the following dependencies:  ADV_ARC.1 Security architecture description  ADV_FSP.2 Security-enforcing functional specification  ADV_TDS.3 Basic modular design  ADV_IMP.1 Implementation representation of the TSF cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 75 of 97  AGD_OPE.1 Operational user guidance  AGD_PRE.1 Preparative procedures All of these are met or exceeded in the EAL4 assurance package. 6.4.4 Security Requirements – Mutual Support and Internal Consistency The following part of the security requirements rationale shows that the set of security requirements for the TOE consisting of the security functional requirements (SFRs) and the security assurance requirements (SARs) together form a mutually supportive and internally consistent whole. The analysis of the TOE´s security requirements with regard to their mutual support and internal consistency demonstrates: The dependency analysis in section 6.3.2 Dependency Rationale for the security functional requirements shows that the basis for mutual support and internal consistency between all defined functional require- ments is satisfied. All dependencies between the chosen functional components are analyzed, and non- satisfied dependencies are appropriately explained. The assurance class EAL4 is an established set of mutually supportive and internally consistent assurance requirements. The dependency analysis for the sensitive assurance components in section 6.3.3 Security Assurance Requirements Rationale shows that the assurance requirements are mutually supportive and internally consistent as all (sensitive) dependencies are satisfied and no inconsistency appears. Inconsistency between functional and assurance requirements could only arise if there are functional-as- surance dependencies which are not met, a possibility which has been shown not to arise in sections 6.3.2 Dependency Rationale and 6.3.3 Security Assurance Requirements Rationale. Furthermore, as also dis- cussed in section 6.3.3 Security Assurance Requirements Rationale, the chosen assurance components are adequate for the functionality of the TOE. So the assurance requirements and security functional require- ments support each other and there are no inconsistencies between the goals of these two groups of secu- rity requirements. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 76 of 97 7 TOE summary specification (ASE_TSS) 7.1 Security Functionality 7.1.1 TSF_Access: Access rights This security functionality manages the access to objects (files, directories, data and secrets) stored in the applet’s file system. It also controls write access of initialization, pre-personalization and personalization data. Access control for initialization and pre-personalization in Phase 2 – while the actual applet is not yet present – is based on the card manager of the underlying JCOP Java Card platform (SF.AccessControl, SF.I&A). Access is granted (or denied) in accordance to access rights that depend on appropriate identification and authentication mechanisms. TSF_Access covers the following SFRs:  FIA_UID.1.1 requires that the TSF shall allow to establish the communication channel, to read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS, and to carry out the Chip Authentication Protocol on behalf of the user to be performed before the user is identified. FIA_UID.1.2 requires that the TSF shall require each user to be successfully identified before allow- ing any other TSF-mediated actions on behalf of that user. TSF_Access realizes the appropriate con- trol of the access rights.  FIA_UAU.1.1 requires that the TSF shall allow to establish the communication channel, to read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS, to identify them- selves by selection of the authentication key, and to carry out the Chip Authentication Protocol on behalf of the user to be performed before the user is authenticated. FIA_UAU.1.2 requires that the TSF shall require each user to be successfully authenticated before allowing any other TSF-mediated actions on behalf of that user. TSF_Access realizes the appropriate control of the access rights.  FIA_UAU.4 requires that the TSF shall prevent reuse of authentication data related to Terminal Au- thentication Protocol, and the Authentication Mechanism based on AES. TSF_Access realizes the appropriate control of the access rights.  FIA_UAU.5.1 requires that the TSF shall provide Terminal Authentication Protocol, Secure messag- ing in MAC-ENC mode, and Symmetric Authentication Mechanism based on AES to support user authentication. FIA_UAU.5.2 requires that the TSF shall authenticate any user’s claimed identity according to specified rules. TSF_Access realizes the appropriate control of the access rights.  FIA_UAU.6 requires that the TSF shall re-authenticate the user under the condition that each com- mand sent to the TOE after successful run of the Chip Authentication Protocol shall be verified as being sent by the GIS. TSF_Access realizes the appropriate control of the access rights.  FDP_ACC.1 requires that the TSF shall enforce the Access Control SFP on terminals gaining write, read and modification access to data in the EF.COM, EF.SOD, EF.DG1 to EF.DG16 of the logical MRTD. TSF_Access realizes the appropriate control of the access rights.  FDP_ACF.1: FDP_ACF.1.1 requires that the TSF shall enforce the Access Control SFP to objects based on subjects (Personalization Agent, Extended Inspection System, Terminal), objects (data EF.DG1, EF.DG2 and EF.DG5 to EF.DG16 of the logical MRTD, data EF.DG3 and EF.DG4 of the logical MRTD, data in EF.COM, data in EF.SOD), and security attributes (authentication status of terminals, Termi- nal Authorization). FDP_ACF.1.2 requires that the TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: (1) the successfully authenticated Personalization Agent is allowed to write and to read the data of the EF.COM, EF.SOD, EF.DG1 to EF.DG16 of the logical MRTD, (2.) the successfully authenticated Extended Inspection cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 77 of 97 System with the Read access to DG 3 (Fingerprint) granted by the relative certificate holder author- ization encoding is allowed to read the data in EF.DG3 of the logical MRTD, and (3.) the successfully authenticated Extended Inspection System with the Read access to DG 4 (Iris) granted by the rela- tive certificate holder authorization encoding is allowed to read the data in EF.DG4 of the logical MRTD. FDP_ACF.1.3 requires that the TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4 requires that he TSF shall explicitly deny access of subjects to objects based on the rules: (1.) A terminal authenticated as CVCA is not allowed to read data in the EF.DG3, (2.) A terminal authenticated as CVCA is not allowed to read data in the EF.DG4, (3.) A terminal authenticated as DV is not allowed to read data in the EF.DG3, (4.) A terminal authenticated as DV is not allowed to read data in the EF.DG4, (5.) Any terminal is not allowed to modify any of the EF.DG1 to EF.DG16 of the logi-cal MRTD, (6.) Any terminal not being successfully authenticated as Extended Inspection System is not allowed to read any of the EF.DG3 to EF.DG4 of the logical MRTD. TSF_Access realizes the appropriate control of the access rights.  FDP_UCT.1: FDP_UCT.1.1 requires that the TSF shall enforce the Access Control SFP to be able to transmit and receive user data in a manner protected from unauthorized disclosure after Chip Au- thentication. TSF_Access realizes the appropriate control of the access rights.  FDP_UIT.1: FDP_UIT.1.1 requires that the TSF shall enforce the Access Control SFP to be able to transmit and receive user data in a manner protected from modification, deletion, insertion and replay errors after Chip Authentication. FDP_UIT.1.2 requires that the TSF shall be able to determine on receipt of user data, whether modification, deletion, insertion and replay has occurred after Chip Authentication. TSF_Access realizes the appropriate control of the access rights.  FMT_SMR.1: FMT_SMR.1.1 requires that the TSF shall maintain the roles (1.) Manufacturer , (2.) Personalization Agent , (3.) Country Verifying Certification Authority, (4.) Document Verifier, (5.) domestic Extended Inspection System, and (6.) foreign Extended Inspection System. FMT_SMR.1.2 requires that the TSF shall be able to associate users with roles. TSF_Access realizes the appropriate control of the access rights.  FMT_LIM.1 requires that the TSF shall be designed in a manner that limits their capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow (1.) User Data to be manipulated, (2.) sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, (3.) TSF data to be disclosed or manipulated, (4.) software to be reconstructed, and (5.) substantial information about construction of TSF to be gathered which may enable other attacks. This is realized by TSF_Access.  FMT_LIM.2 requires that the TSF shall be designed in a manner that limits their availability so that in conjunction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow (1.) User Data to be manipulated, (2.) sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, (3.), TSF data to be disclosed or manipulated (4.), soft- ware to be reconstructed, and (5.) substantial information about construction of TSF to be gathered which may enable other attacks. This is realized by TSF_Access.  FMT_MTD.1.1/CVCA_INI requires that the TSF shall restrict the ability to write the (1.) initial Coun- try Verifying Certification Authority Public Key, the (2.) initial Country Verifying Certification Author- ity Certificate, and the (3.) initial Current Date to the Personalization Agent. TSF_Access realizes the appropriate control of the access rights.  FMT_MTD.1.1/CVCA_UPD requires that the TSF shall restrict the ability to update the (1.) Country Verifying Certification Authority Public Key and the (2.) Country Verifying Certification Authority Certificate to the Country Verifying Certification Authority. TSF_Access realizes the appropriate con- trol of the access rights.  FMT_MTD.1.1/DATE requires that the TSF shall restrict the ability to modify the Current date to the (1.) Country Verifying Certification Authority, the (2.) Document Verifier, and the (3.) Domestic Ex- tended Inspection System. TSF_Access realizes the appropriate control of the access rights. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 78 of 97  FMT_MTD.1.1/KEY_WRITE requires that the TSF shall restrict the ability to write the Document Basic Access Keys to the Personalization Agent. TSF_Access realizes the appropriate control of the access rights.  FMT_MTD.1.1/CAPK requires that the TSF shall restrict the ability to load the Chip Authentication Private Key to the Personalization Agent. TSF_Access realizes the appropriate control of the access rights.  FMT_MTD.1.1/AAPK requires that the TSF shall restrict the ability to load the optional Active Au- thentication Private Key to the Personalization Agent. TSF_Access realizes the appropriate control of the access rights.  FMT_MTD.1.1/KEY_READ requires that the TSF shall restrict the ability to read the (1.) Document Basic Access Keys, the (2.) Chip Authentication Private Key, and the (3.) Personalization Agent Keys to none. TSF_Access realizes the appropriate control of the access rights. 7.1.2 TSF_Admin: Administration This Security Functionality manages the storage of manufacturing data, pre-personalization data and per- sonalization data. This storage area is a write-only-once area and write access is subject to Manufacturer or Personalization Agent authentication. Management of manufacturing and pre-personalization data in Phase 2 – while the actual applet is not yet present – is based on the card manager of the underlying JCOP Java Card platform (SF.SecureManagement); also Audit functionality is based on JCOP functionality (SF.Audit). During Operational Use phase, read access is only possible after successful authentication. TSF_Admin covers the following SFRs:  FAU_SAS.1: FAU_SAS.1 requires that the TSF shall provide the Manufacturer with the capability to store the IC Identification Data in the audit records. This is realized by TSF.Admin.  FMT_SMF.1: FMT_SMF.1.1 requires that the TSF shall be capable of performing the following man- agement functions: (1.) Initialization , (2.) Pre-personalization , (3.) Personalization. This is realized within TSF_Admin.  FMT_SMR.1: FMT_SMR.1.1 requires that the TSF shall maintain the roles (1.) Manufacturer , (2.) Personalization Agent , (3.) Country Verifying Certification Authority, (4.) Document Verifier, (5.) domestic Extended Inspection System, and (6.) foreign Extended Inspection System. FMT_SMR.1.2 requires that the TSF shall be able to associate users with roles. This is realized within TSF_Admin.  FMT_LIM.1 requires that the TSF shall be designed in a manner that limits their capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow (1.) User Data to be manipulated, (2.) sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, (3.) TSF data to be disclosed or manipulated, (4.) software to be reconstructed, and (5.) substantial information about construction of TSF to be gathered which may enable other attacks. This is realized by TSF_Admin.  FMT_LIM.2 requires that the TSF shall be designed in a manner that limits their availability so that in conjunction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow (1.) User Data to be manipulated, (2.) sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, (3.), TSF data to be disclosed or manipulated (4.), soft- ware to be reconstructed, and (5.) substantial information about construction of TSF to be gathered which may enable other attacks. This is realized by TSF_Admin.  FMT_MTD.1.1/CVCA_INI requires that the TSF shall restrict the ability to write the (1.) initial Coun- try Verifying Certification Authority Public Key, the (2.) initial Country Verifying Certification Author- ity Certificate, and the (3.) initial Current Date to the Personalization Agent. This is realized within TSF_Admin. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 79 of 97  FMT_MTD.1.1/CVCA_UPD requires that the TSF shall restrict the ability to update the (1.) Country Verifying Certification Authority Public Key and the (2.) Country Verifying Certification Authority Certificate to the Country Verifying Certification Authority. This is realized within TSF_Admin.  FMT_MTD.1.1/DATE requires that the TSF shall restrict the ability to modify the Current date to the (1.) Country Verifying Certification Authority, the (2.) Document Verifier, and the (3.) Domestic Ex- tended Inspection System. This is realized within TSF_Admin.  FMT_MTD.1.1/CAPK requires that the TSF shall restrict the ability to load the Chip Authentication Private Key to the Personalization Agent. This is realized within TSF_Admin.  FMT_MTD.1/KEY_WRITE: FMT_MTD.1.1/KEY_WRITE requires that the TSF shall restrict the ability to write the Document Basic Access Keys to the Personalization Agent. This is realized within TSF_Admin. 7.1.3 TSF_Secret: Secret key management This Security Functionality ensures secure management of secrets such as cryptographic keys. This covers secure key storage, access to keys as well as secure key deletion. These functions make use of SF.CryptoKey of the underlying JCOP Java Card OS. TSF_Secret covers the following SFRs:  FMT_MTD.1.1/KEY_WRITE requires that the TSF shall restrict the ability to write the Document Basic Access Keys to the Personalization Agent. This is realized within TSF_Secret.  FMT_MTD.1.1/CAPK requires that the TSF shall restrict the ability to load the Chip Authentication Private Key to the Personalization Agent. This is realized by TSF_Admin, TSF_Access and TSF_OS. This is realized within TSF_Secret.  FMT_MTD.1.1/AAPK requires that the TSF shall restrict the ability to load the Active Authentication Private Key to the Personalization Agent. This is realized by TSF_Admin, TSF_Access and TSF_OS. This is realized within TSF_Secret.  FMT_MTD.1/KEY_READ: FMT_MTD.1.1/KEY_READ requires that the TSF shall restrict the ability to read the (1.) Document Basic Access Keys, the (2.) Chip Authentication Private Key, the (3.) the Personalization Agent Keys, and the (4.) optional Active Authentication Private Key to none. This is realized within TSF_Secret. 7.1.4 TSF_Crypto: Cryptographic operations This Security Functionality performs high level cryptographic operations. The implementation is based on the Security Functionalities provided by TSF_OS. TSF_Crypto covers the following SFRs:  FCS_CKM.1: FCS_CKM.1.1 requires that the TSF shall generate cryptographic keys based on the Dif- fie-Hellman key derivation Protocol compliant to PKCS#3 with cryptographic key sizes of 1976 - 2048 bit, and ECDH compliant to ISO 15946 with cryptographic key sizes of 256 and 320 bit and specified elliptic curves, meeting [TR-03110], Annex A.1. This is realized within TSF_Crypto (Diffie-Hellman) and TSF_OS (ECDH).  FCS_CKM.4: FCS_CKM.4.1 requires that the TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method physically overwriting the keys with zeros by method (e.g. clearKey of [Java_RES]) or automatically on applet deselection. This is realized in the security functionalities provided by TSF_OS and TSF_Secret. The only exceptions are the CMAC Sub- Keys (for Secure Messaging), where the security functionality is provided by TSF_Crypto. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 80 of 97  FCS_COP.1.1/MAC requires that the TSF shall perform secure messaging – message authentication code in accordance with a specified cryptographic algorithm: AES-CMAC with key sizes of 128, 192 and 256 bit. This is realized within TSF_Crypto.  FCS_COP.1/SIG_VER requires that the TSF shall perform digital signature verification in accordance with a specified cryptographic algorithm: ECDSA with SHA-1, SHA-224 or SHA-256 and cryptographic key sizes of 160, 192, 224, 256 and 320 bit with specified curves that meet the following: ISO15946. This is realized within TSF_Crypto (and TSF_OS).  FIA_UAU.5.1 requires that the TSF shall provide Terminal Authentication Protocol, Secure messag- ing in MAC-ENC mode, and Symmetric Authentication Mechanism based on AES to support user authentication. FIA_UAU.5.2 requires that the TSF shall authenticate any user’s claimed identity according to specified rules. TSF_Crypto adds parts of the cryptographic implementation. 7.1.5 TSF_ SecureMessaging: Secure Messaging This Security Functionality realizes a secure communication channel after successful authentication for per- sonalization and BAC during operational use. TSF_SecureMessaging covers the following SFRs:  FIA_UAU.5: FIA_UAU.5.1 requires that the TSF shall provide Terminal Authentication Protocol, Se- cure messaging in MAC-ENC mode, and Symmetric Authentication Mechanism based on AES to sup- port user authentication. FIA_UAU.5.2 requires that the TSF shall authenticate any user’s claimed identity according to specified rules. TSF_SecureMessaging provides the secure messaging mecha- nism.  FDP_UIT.1: FDP_UIT.1.1 requires that the TSF shall enforce the Access Control SFP to be able to transmit and receive user data in a manner protected from modification, deletion, insertion and replay errors after Chip Authentication. FDP_UIT.1.2 requires that the TSF shall be able to determine on receipt of user data, whether modification, deletion, insertion and replay has occurred after Chip Authentication. TSF_SecureMessaging provides the protected communication. 7.1.6 TSF_Auth: Authentication protocols This security functionality realizes different authentication mechanisms. 7.1.6.1 TSF_Auth_Term TSF_Auth_Term performs the Terminal Authentication to authenticate the terminal (EAC). TSF_Auth_Term covers the following SFRs:  FIA_UAU.5: FIA_UAU.5.1 requires that the TSF shall provide Terminal Authentication Protocol, Se- cure messaging in MAC-ENC mode, and Symmetric Authentication Mechanism based on AES to sup- port user authentication. FIA_UAU.5.2 requires that the TSF shall authenticate any user’s claimed identity according to specified rules. The authentication mechanisms are provided by TSF_Auth_Term.  FDP_ACC.1 requires that the TSF shall enforce the Access Control SFP on terminals gaining write, read and modification access to data in the EF.COM, EF.SOD, EF.DG1 to EF.DG16 of the logical MRTD. The authentication mechanism is provided by TSF_Auth_Term.  FDP_ACF.1: FDP_ACF.1.1 requires that the TSF shall enforce the Access Control SFP to objects based on subjects (Personalization Agent, Extended Inspection System, Terminal), objects (data EF.DG1, EF.DG2 and EF.DG5 to EF.DG16 of the logical MRTD, data EF.DG3 and EF.DG4 of the logical MRTD, data in EF.COM, data in EF.SOD), and security attributes (authentication status of terminals, Termi- nal Authorization). FDP_ACF.1.2 requires that the TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: (1) the successfully cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 81 of 97 authenticated Personalization Agent is allowed to write and to read the data of the EF.COM, EF.SOD, EF.DG1 to EF.DG16 of the logical MRTD, (2.) the successfully authenticated Extended Inspection System with the Read access to DG 3 (Fingerprint) granted by the relative certificate holder author- ization encoding is allowed to read the data in EF.DG3 of the logical MRTD, and (3.) the successfully authenticated Extended Inspection System with the Read access to DG 4 (Iris) granted by the rela- tive certificate holder authorization encoding is allowed to read the data in EF.DG4 of the logical MRTD. FDP_ACF.1.3 requires that the TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4 requires that he TSF shall explicitly deny access of subjects to objects based on the rules: (1.) A terminal authenticated as CVCA is not allowed to read data in the EF.DG3, (2.) A terminal authenticated as CVCA is not allowed to read data in the EF.DG4, (3.) A terminal authenticated as DV is not allowed to read data in the EF.DG3, (4.) A terminal authenticated as DV is not allowed to read data in the EF.DG4, (5.) Any terminal is not allowed to modify any of the EF.DG1 to EF.DG16 of the logi-cal MRTD, (6.) Any terminal not being successfully authenticated as Extended Inspection System is not allowed to read any of the EF.DG3 to EF.DG4 of the logical MRTD. The authentication mechanism for the Access Control SFP is provided by TSF_Auth_Term.  FMT_MTD.3.1 requires that the TSF shall ensure that only secure values of the certificate chain are accepted for TSF data of the Terminal Authentication Protocol and the Access Control. This is real- ized by TSF_Auth_Term. The refinement to FMT_MTD.3.1 requires that the certificate chain is valid if and only if 1. the digital signature of the Inspection System Certificate can be verified as correct with the public key of the Document Verifier Certificate and the expiration date of the Inspection System Certificate is not before the Current Date of the TOE, 2. the digital signature of the Document Verifier Certificate can be verified as correct´with the public key in the Certificate of the Country Verifying Certification Authority and the expiration date of the Document Verifier Certificate is not before the Current Date of the TOE, 3. the digital signature of the Certificate of the Country Verifying Certification Authority can be verified as correct with the public key of the Country Verifying Certification Authority known to the TOE and the expiration date of the Certificate of the Country Verifying Certification Author- ity is not before the Current Date of the TOE. In addition, the refinement to FMT_MTD.3.1 requires that  The Inspection System Public Key contained in the Inspection System Certificate in a valid cer- tificate chain is a secure value for the authentication reference data of the Extended Inspection System.  The intersection of the Certificate Holder Authorizations contained in the certificates of a valid certificate chain is a secure value for Terminal Authorization of a successful authenticated Ex- tended Inspection System. This is realized by TSF_Auth_Term. 7.1.6.2 TSF_Auth_Sym TSF_Auth_Sym performs an authentication mechanism based on TDES used for BAC38 and on AES for sym- metric authentication based on pre-shared keys used for personalization. TSF_Auth_Sym covers the follow- ing SFRs:  FDP_ACF.1: FDP_ACF.1.1 requires that the TSF shall enforce the Access Control SFP to objects based on subjects (Personalization Agent, Extended Inspection System, Terminal), objects (data EF.DG1, EF.DG2 and EF.DG5 to EF.DG16 of the logical MRTD, data EF.DG3 and EF.DG4 of the logical MRTD, 38 Which is not part of the certified security functionality in this ST. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 82 of 97 data in EF.COM, data in EF.SOD), and security attributes (authentication status of terminals, Termi- nal Authorization). FDP_ACF.1.2 requires that the TSF shall enforce the following rules to determine if an operation among controlled subjects and controlled objects is allowed: (1) the successfully authenticated Personalization Agent is allowed to write and to read the data of the EF.COM, EF.SOD, EF.DG1 to EF.DG16 of the logical MRTD, (2.) the successfully authenticated Extended Inspection System with the Read access to DG 3 (Fingerprint) granted by the relative certificate holder author- ization encoding is allowed to read the data in EF.DG3 of the logical MRTD, and (3.) the successfully authenticated Extended Inspection System with the Read access to DG 4 (Iris) granted by the rela- tive certificate holder authorization encoding is allowed to read the data in EF.DG4 of the logical MRTD. FDP_ACF.1.3 requires that the TSF shall explicitly authorize access of subjects to objects based on the following additional rules: none. FDP_ACF.1.4 requires that he TSF shall explicitly deny access of subjects to objects based on the rules: (1.) A terminal authenticated as CVCA is not allowed to read data in the EF.DG3, (2.) A terminal authenticated as CVCA is not allowed to read data in the EF.DG4, (3.) A terminal authenticated as DV is not allowed to read data in the EF.DG3, (4.) A terminal authenticated as DV is not allowed to read data in the EF.DG4, (5.) Any terminal is not allowed to modify any of the EF.DG1 to EF.DG16 of the logi-cal MRTD, (6.) Any terminal not being successfully authenticated as Extended Inspection System is not allowed to read any of the EF.DG3 to EF.DG4 of the logical MRTD. The authentication mechanism for the Access Control SFP is provided by TSF_Auth_Sym.  FMT_MTD.1.1/CVCA_INI requires that the TSF shall restrict the ability to write the (1.) initial Coun- try Verifying Certification Authority Public Key, the (2.) initial Country Verifying Certification Author- ity Certificate, and the (3.) initial Current Date to the Personalization Agent. The authentication mechanism is provided by TSF_Auth_Sym.  FMT_MTD.1.1/CVCA_UPD requires that the TSF shall restrict the ability to update the (1.) Country Verifying Certification Authority Public Key and the (2.) Country Verifying Certification Authority Certificate to the Country Verifying Certification Authority. The authentication mechanism is pro- vided by TSF_Auth_Sym.  FMT_MTD.1.1/DATE requires that the TSF shall restrict the ability to modify the Current date to the (1.) Country Verifying Certification Authority, the (2.) Document Verifier, and the (3.) Domestic Ex- tended Inspection System. The authentication mechanism is provided by TSF_Auth_Sym.  FMT_MTD.1.1/KEY_WRITE requires that the TSF shall restrict the ability to write the Document Basic Access Keys to the Personalization Agent. The authentication mechanism is provided by TSF_Auth_Sym.  FMT_MTD.1.1/CAPK requires that the TSF shall restrict the ability to load the Chip Authentication Private Key to the Personalization Agent. The authentication mechanism is provided by TSF_Auth_Sym. 7.1.6.3 TSF_Auth_Chip This security functionality manages the capability of the TOE to authenticate itself to the terminal using the Chip Authentication Protocol (EAC). TSF_Auth_Chip covers the following SFRs:  FIA_UID.1: FIA_UID.1.1 requires that the TSF shall allow to establish the communication channel, to read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS, and to carry out the Chip Authentication Protocol on behalf of the user to be performed before the user is identified. FIA_UID.1.2 requires that the TSF shall require each user to be successfully identified before allowing any other TSF-mediated actions on behalf of that user. The authentication mecha- nism leads to the identification and is provided by TSF_Auth_Chip.  FIA_UAU.1: FIA_UAU.1.1 requires that the TSF shall allow to establish the communication channel, to read the Initialization Data if it is not disabled by TSF according to FMT_MTD.1/INI_DIS, to identify themselves by selection of the authentication key, and to carry out the Chip Authentication Protocol cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 83 of 97 on behalf of the user to be performed before the user is authenticated. FIA_UAU.1.2 requires that the TSF shall require each user to be successfully authenticated before allowing any other TSF- mediated actions on behalf of that user. The authentication mechanism is provided by TSF_Auth_Chip.  FIA_UAU.6: requires that the TSF shall re-authenticate the user under the condition that each com- mand sent to the TOE after successful run of the Chip Authentication Protocol shall be verified as being sent by the GIS. The authentication mechanism is provided by TSF_Auth_Chip.  FIA_API.1.1 requires that the TSF shall provide a Chip Authentication Protocol according to [TR- 03110] to prove the identity of the TOE. This is provided by TSF_Auth_Chip.  FDP_UCT.1: FDP_UCT.1.1 requires that the TSF shall enforce the Access Control SFP to be able to transmit and receive user data in a manner protected from unauthorized disclosure after Chip Au- thentication. The authentication mechanism is provided by TSF_Auth_Chip.  FDP_UIT.1: FDP_UIT.1.1 requires that the TSF shall enforce the Access Control SFP to be able to transmit and receive user data in a manner protected from modification, deletion, insertion and replay errors after Chip Authentication. FDP_UIT.1.2 requires that the TSF shall be able to determine on receipt of user data, whether modification, deletion, insertion and replay has occurred after Chip Authentication. The authentication mechanism for the Access Control SFP is provided by TSF_Auth_Chip. 7.1.6.4 TSF_Auth_AA This security functionality manages the optional capability of the TOE to authenticate itself to the terminal using the Active Authentication Protocol (AA). TSF_Auth_AA covers the following SFRs:  FIA_API.1.1/AA requires that the TSF shall provide an optional Active Authentication Protocol ac- cording to [ICAODoc] to prove the identity of the TOE. This is provided by TSF_Auth_AA. 7.1.7 TSF_Integrity: Integrity protection This Security Functionality protects the integrity of internal applet data like the Access control lists. This function makes use of SF.SecureManagement and SF.Transaction of the underlying JCOP Java Card OS (cf. the according security target [ST_JCOP]. TSF_Integrity covers the following SFRs:  FPT_FLS.1: FPT_FLS.1.1 requires that the TSF shall preserve a secure state when the following types of failures occur: (1) exposure to out-of-range operating conditions where therefore a malfunction could occur, and (2) failure detected by TSF according to FPT_TST.1. This is realized within TSF_Integrity. 7.1.8 TSF_OS: Javacard OS Security Functionalities The Javacard operation system (part of the TOE) features the following Security Functionalities. The exact description can be found in the Javacard OS security target [ST_JCOP]; the realization is partly based on the security functionalities of the certified cryptographic library and the certified IC platform:  Enforcement of access control (SF.AccessControl)  Audit functionality (SF.Audit)  Cryptographic key management (SF.CryptoKey)  Cryptographic operations (SF.CryptoOperation)  Identification and authentication (SF.I&A)  Secure management of TOE resources (SF.SecureManagement) cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 84 of 97  Transaction management (SF.Transaction) Since the applet layer of the TOE is based on the Javacard OS, the realization of all TOE security functional- ities and thus the fulfillment of all SFRs has dependencies to TSF_OS. The following items list all SFRs where TSF_OS has an impact above this level:  FCS_CKM.1: FCS_CKM.1.1 requires that the TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation algorithm and specified cryptographic key sizes. This is realized within TSF_OS.  FCS_CKM.4.1 requires that the TSF shall destroy cryptographic keys in accordance with a specified cryptographic key destruction method. This is realized in the security functionality provided by TSF_OS.  FCS_COP.1.1/SHA: FCS_COP.1.1/SHA requires that the TSF shall perform hashing in accordance with a specified cryptographic algorithm. This is realized within TSF_OS.  FCS_COP.1.1/SYM requires that the TSF shall perform secure messaging – encryption and decryp- tion in accordance with a specified cryptographic algorithm: AES in CBC mode and cryptographic key size 128, 192 or 256 bit that meets the following: FIPS 197 and TR-03110. This is realized within TSF_OS.  FCS_COP.1.1/MAC requires that the TSF shall perform secure messaging – message authentication code in accordance with a specified cryptographic algorithm: AES-CMAC and cryptographic key size 128, 192 or 256 bit that meets the following: TR-03110. This is realized within TSF_OS.  FCS_COP.1/SIG_VER requires that the TSF shall perform digital signature verification in accordance with a specified cryptographic algorithm: ECDSA with SHA-1, SHA-224 or SHA-256 and cryptographic key sizes of 160, 192, 224, 256 and 320 bit with specified curves that meet the following: ISO15946This is realized within TSF_Crypto and TSF_OS  FCS_RND.1: FCS_RND.1.1 requires that the TSF shall provide a mechanism to generate random numbers that meet the AIS 20 Class DRG3 quality metric. This is realized within TSF_OS.  FMT_LIM.1 requires that the TSF shall be designed in a manner that limits their capabilities so that in conjunction with “Limited availability (FMT_LIM.2)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow (1.) User Data to be manipulated, (2.) sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, (3.) TSF data to be disclosed or manipulated, (4.) software to be reconstructed, and (5.) substantial information about construction of TSF to be gathered which may enable other attacks. This is realized by TSF_OS.  FMT_LIM.2 requires that the TSF shall be designed in a manner that limits their availability so that in conjunction with “Limited capabilities (FMT_LIM.1)” the following policy is enforced: Deploying Test Features after TOE Delivery does not allow (1.) User Data to be manipulated, (2.) sensitive User Data (EF.DG3 and EF.DG4) to be disclosed, (3.), TSF data to be disclosed or manipulated (4.), soft- ware to be reconstructed, and (5.) substantial information about construction of TSF to be gathered which may enable other attacks. This is realized by TSF_OS.  FMT_MTD.1.1/INI_ENA requires that the TSF shall restrict the ability to write the Initialization Data and Prepersonalization Data to the Manufacturer. This is realized by TSF_OS.  FMT_MTD.1.1/INI_DIS requires that the TSF shall restrict the ability to disable read access for users to the Initialization Data to the Personalization Agent. This is realized by TSF_OS.  FMT_MTD.1.1/KEY_READ requires that the TSF shall restrict the ability to read the (1.) Document Basic Access Keys, the (2.) Chip Authentication Private Key, the (3.) Personalization Agent Keys and the (4.) optional Active Authentication Key to none. This is realized by TSF_OS.  FPT_EMSEC.1: FPT_EMSEC.1.1 requires that the TOE shall not emit variations in power consumption or timing during command execution in excess of non-useful information enabling access to Per- sonalization Agent Keys and Chip Authentication Private Key. FPT_EMSEC.1.2 requires that the TSF cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 85 of 97 shall ensure any users are unable to use the following interface: smart card circuit contacts or con- tactless interface to gain access to Personalization Agent Key(s), the optional Active Authentication Key and Chip Authentication Private Key. This is mainly realized by appropriate measures in TSF_OS together with the strict following of the security implementation guidelines of the Javacard plat- form.  FPT_FLS.1.1 requires that the TSF shall preserve a secure state when the following types of failures occur: (1) exposure to out-of-range operating conditions where therefore a malfunction could oc- cur, and (2) failure detected by TSF according to FPT_TST.1. This is realized within TSF_OS (together with TSF_Integrity).  FPT_TST.1.1 requires that the TSF shall run a suite of self tests during initial start-up to demonstrate the correct operation of the TSF. FPT_TST.1.2 requires that the TSF shall provide authorised users with the capability to verify the integrity of TSF data. FPT_TST.1.3 requires that the TSF shall provide authorised users with the capability to verify the integrity of stored TSF executable code. This all is realized by TSF_OS, in parts due to the characteristics of the hardware platform.  FPT_PHP.3.1 requires that the TSF shall resist physical manipulation and physical probing to the TSF by responding automatically such that the SFRs are always enforced. This all is realized by TSF_OS, in parts due to the characteristics of the hardware platform. 7.2 TOE summary specification rationale This summary specification shows that the TSF and assurance measures are appropriate to fulfill the TOE security requirements. Each TOE security functional requirement is implemented by at least one security functionality. The map- ping of TOE Security Requirements and TOE Security Functionalities is given in the following table. If itera- tions of a TOE security requirement are covered by the same TOE security functionality the mapping will appear only once. The description of the TSF is given in section 7.1. TSF_Access TSF_Admin TSF_Secret TSF_Crypto TSF_SecureMessaging TSF_Auth TSF_Integrity TSF_OS FAU_SAS.1 x FCS_CKM.1 x x FCS_CKM.4 x x FCS_COP.1/SHA x FCS_COP.1/SYM x FCS_COP.1/MAC x x FCS_COP.1/SIG_VER x x FCS_RND.1 x FIA_UID.1 x x FIA_UAU.1 x x cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 86 of 97 TSF_Access TSF_Admin TSF_Secret TSF_Crypto TSF_SecureMessaging TSF_Auth TSF_Integrity TSF_OS FIA_UAU.4 x x FIA_UAU.5 x x x x FIA_UAU.6 x x FIA_API.1 x FIA_API.1/AA x FDP_ACC.1 x x FDP_ACF.1 x x FDP_UCT.1 x x FDP_UIT.1 x x x FMT_SMF.1 x FMT_SMR.1 x x x FMT_LIM.1 x x x FMT_LIM.2 x x x FMT_MTD.1/INI_ENA x FMT_MTD.1/INI_DIS x FMT_MTD.1/CVCA_INI x x x FMT_MTD.1/CVCA_UPD x x x FMT_MTD.1/DATE x x x FMT_MTD.1/KEY_WRITE x x FMT_MTD.1/CAPK x x x FMT_MTD.1/AAPK x x FMT_MTD.1/KEY_READ x x x x FMT_MTD.3 x FPT_EMSEC.1 x FPT_FLS.1 x x FPT_TST.1 x FPT_PHP.3 x Table 14: Mapping of TOE Security Requirements and TOE Security Functionalities. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 87 of 97 8 Crypto disclaimer This chapter contains a summary of the cryptographic mechanisms used to implement the security func- tionality of the TOE according to this security target. Nr. Purpose Cryptographic Mechanism Standard of Implementation Key Size in Bits Standard of Application Comments 1 Authenticity ECDSA signature verification of card verifiable certificates with SHA-1, SHA-224, SHA-256 [ISO15946-2] (ECDSA), [FIPS 180-4] (SHA) 160, 192, 224, 256 and 320 bit, Brainpool or NIST curves: brainpoolP{160, 192, 224, 256,320}r1 (RFC 5639) or NIST P- 160, P-192, P- 224, P-256 (FIPS186-3) [TR-03110] FCS_COP.1/SIG _VER; Verification of certificates for authentication 2 Authentication BAC authentication protocol (TDES- based) [ICAODoc] Length of MRZ , 112 bit [ICAODoc], [TR- 03110] PP AN 29 3 Chip Authentication v.1 for authentication of travel document's chip to inspection system based on ephemeral-static ECDH in combination with AES [TR-03110] [ISO15946] (ECDH) [FIPS197] (AES) Key sizes corresponding to the used elliptic curve brainpoolP{256, 320}r1 (RFC 5639), NIST P- {256} (FIPS186- 3) [TR-03110] FIA_API.1 4 Chip Authentication v.1 for authentication of travel document's chip to inspection system based on ephemeral-static DH in combination with AES [PKCS#3] (DH), [FIPS197] (AES) Plength = 1976- 2048 bit [ICAODoc], [TR-03110] FIA_API.1 5 Terminal Authentication v.1 for authentication of inspection system to travel documents's chip based on ECDSA [ISO15946-2] (ECDSA), [FIPS 180-4] (SHA) 160, 192, 224, 256 and 320 bit, Brainpool or NIST curves: brainpoolP{160, 192, 224, 256,320}r1 (RFC 5639) or NIST P- [ICAO 9309], [TR-03110] Only for access of DG.3, DG.4 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 88 of 97 Nr. Purpose Cryptographic Mechanism Standard of Implementation Key Size in Bits Standard of Application Comments using SHA- {1,224,256} 160, P-192, P- 224, P-256 (FIPS186-3) 6 Active Authentication of the MRTD’s chip based on RSA using SHA-{1,224,256} [ISO9796-2] (RSA), [FIPS180-4] (SHA) Moduluslength= 1976-2048 Bit [ICAODoc] FIA_API.1/AA, optional 7 Symmetric Authentication Mechanism with Personalization Agent Key using AES. Standard equivalent to ISO 18013-3 |k|=128, 192, 256 [ICAODoc] but with AES FIA_UAU.5 8 Key Derivation ECDH using SHA-1 or SHA-256 [ISO15946] (ECDH), [FIPS180-4] (SHA), [TR-03110] , Annex A.1. ECDH Key sizes corresponding to the used elliptic curve brainpoolP{256, 320}r1 (RFC 5639), NIST P- {256} (FIPS186- 3) [TR-03110] FCS_CKM.1 for Chip Authentication 9 DH using SHA-1 or SHA-256 [PKCS3] (DH), [FIPS 180-4] (SHA), [TR-03110] , Annex A.1. |k|= 1976-2048 [TR-03110] FCS_CKM.1, for Chip Authentication 10 SHA-1, SHA-224 and SHA-256 for key derivation by MRTD FIPS 180-4 - FCS_COP.1/SHA 11 Confidentiality AES in CBC mode [FIPS197] (AES), [NIST800-38A] (CBC) |k|=128, 192, 256 [TR-03110] FCS_COP.1/SY M 12 Integrity AES in CMAC mode [FIPS197] (AES), [NIST800-38B] (CMAC) |k|=128, 192, 256 [TR-03110] FCS_COP.1/MA C 13 Trusted Channel Secure messaging in ENC_MAC mode [FIPS197] (AES); [TR- 03110] |k|=128, 192, 256 ICAO 9303 [ICAODoc], [TR-03110] FCS_COP.1/SY M and FCS_COP.1/MA C 14 Secure messaging with message authentication code: AES CMAC Standard equivalent to ISO 18013-3 |k|=128, 192, 256 [ICAODoc] but with AES For personalization . cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 89 of 97 Nr. Purpose Cryptographic Mechanism Standard of Implementation Key Size in Bits Standard of Application Comments 15 Cryptographic primitive Deterministic RNG DRG.3 [AIS20] - FCS_RNG.1 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 90 of 97 References In the following tables, the references used in this document are summarized. The first column lists the internal reference names, the third (last) column – if applicable – the reference numbers to these docu- ments or older versions of these documents in the protection profile PP-0056 [PP0056]. Common Criteria [CC_1] Common Criteria for Information Technology Security Evaluation, Part 1: In- troduction and General Model; Version 3.1, Revision 4, September 2012; CCMB-2012-09-001. [1] [CC_2] Common Criteria for Information Technology Security Evaluation, Part 2: Se- curity Functional Requirements; Version 3.1, Revision 4, September 2012; CCMB-2012-09-002. [2] [CC_3] Common Criteria for Information Technology Security Evaluation, Part 3: Se- curity Assurance Requirements; Version 3.1, Revision 4, September 2012; CCMB-2012-09-003. [3] [CC_4] Common Methodology for Information Technology Security Evaluation, Evaluation Methodology; Version 3.1, Revision 4, September 2012; CCMB- 2012-09-004. [4] [JIL_1] Joint Interpretation Library: Certification of "open" smart card products; Version 1.1 (for trial use), 4 February 2013 Protection Profiles [PP0056] Common Criteria Protection Profile Machine Readable Travel Document with “ICAO Application”, Extended Access Control, Version 1.10, 25.3.2009, BSI-PP-0056, Bundesamt für Sicherheit in der Informationstechnik. - [PP0002] PP conformant to Smartcard IC Platform Protection Profile, Version 1.0, July 2001; registered and certified by Bundesamt für Sicherheit in der Infor- mationstechnik (BSI) under the reference BSI-PP-0002-2001. [22] [PP0035] Security IC Platform Protection Profile, Version 1.0, June 2007; registered and certified by BSI (Bundesamt für Sicherheit in der Informationstechnik) under the reference BSI-PP-0035-2007. [24] [PP0055] Common Criteria Protection Profile Machine Readable Travel Document with „ICAO Application", Basic Access Control, BSI-PP-0055, Version 1.10, 25th March 2009. [25] [PP_Javacard] Java Card System - Open Configuration Protection Profile, Version 2.6, Cer- tified by ANSSI, the French Certification Body April, 19th 2010 - TOE and Platform References [Guidance] cv act ePasslet Suite v2.1 - Java Card applet configuration providing Machine Readable Travel Document with “ICAO Application”, Extended Access Con- trol (EAC) - Guidance Manual. For the exact version please refer to the cer- tification report. - [ST_BAC] cv act ePasslet/MRTD-BAC Security Target, BSI-DSZ-CC-0911; cryptovision, 2013. - cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 91 of 97 [ZertIC] Certification Report BSI-DSZ-CC-0858-2013 for NXP Secure PKI Smart Card Controllers P5CD128V0v/ V0B(s), P5CC128V0v/ V0B(s), P5CD145V0v/ V0B(s), P5CC145V0v/ V0B(s), P5CN145V0v/V0B(s), each including IC Dedi- cated Software from NXP Semiconductors Germany GmbH; 12.6.2013. - [ZertJCOP] Certification Report NSCIB-CC-13-37760-CR2 for NXP J3E145_M64, J3E120_M65, J3E082_M65, J2E145_M64, J2E120_M65, and J2E082_M65 Secure Smart Card Controller Revision 3, TÜV Rheinland Nederland B.V.; 25.8.2014. - [ZertCL] Certification Report BSI-DSZ-CC-0750-V2-2014 for NXP Crypto Library V2.7/2.9 on SmartMX P5Cx128/P5Cx145 V0v/V0B(s) from NXP Semiconduc- tors Germany GmbH; 16.07.2014. - [ST_JCOP] NXP J3E145_M64, J3E120_M65, J3E082_M65, J2E145_M64, J2E120_M65, and J2E082_M65 Secure Smart Card Controller Revision 3, Security Target Lite, Rev. 00.03 - 13 August 2014, NSCIB-CC-13-37760 - [ST_CL] Crypto Library V2.7/2.9 on SmartMX P5Cx128/P5Cx145 V0v/ V0B(s), Secu- rity Target Lite, Rev. 1.7, 26 June 2014, BSI-DSZ-CC-0750-V2 - [ST_IC] NXP Secure Smart Card Controllers P5Cx128V0v / P5Cx145V0v/V0B(s), Se- curity Target Lite, Rev. 2.1, 16. November 2013 , BSI-DSZ-CC-0858 - ICAO specifications [ICAODoc] ICAO Doc 9303, Machine Readable Travel Documents, part 1 – Machine Readable Passports, Sixth Edition, 2006, International Civil Aviation Organi- zation [5] Cryptography [TR-03110] „Technical Guideline TR-03110-1, Advanced Security Mechanisms for Ma- chine Readable Travel Documents – Extended Access Control (EAC), Version 1.11, TR-03110, Bundesamt für Sicherheit in der Informationstechnik (BSI) [26] [TR-ECC] Technical Guideline: Elliptic Curve Cryptography according to ISO 15946.TR- ECC, BSI 2006. [27] [ISO7816-4] ISO 7816, Identification cards – Integrated circuit(s) cards with contacts, Part 4: Organization, security and commands for interchange, FDIS 2004 [28] [AIS20] Anwendungshinweise und Interpretationen zum Schema (AIS); AIS 20, Ver- sion 3, 15.05.2013, Bundesamt für Sicherheit in der Informationstechnik - [AIS31] Anwendungshinweise und Interpretationen zum Schema, AIS 31: Funk-tio- nalitätsklassen und Evaluationsmethodologie für physikalische Zufalls-zah- lengeneratoren, Version 3, Stand:15.05.2013 - [ISO14888-3] ISO/IEC 14888-3: Information technology – Security techniques – Digital sig- natures with appendix – Part 3: Certificate-based mechanisms, 1999 [7] [FIPS46-3] FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATION FIPS PUB 46-3, DATA ENCRYPTION STANDARD (DES), Reaffirmed 1999 October 25, U.S. DEPARTMENT OF COMMERCE/National Institute of Standards and Techn logy [8] cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 92 of 97 [NIST800-20] NIST Special Publication 800-20, Modes of Operation Validation System for the Triple Data Encryption Algorithm, US Department of Commerce, Octo- ber 1999 [9] [FIPS180-2] Federal Information Processing Standards Publication 180-2 SECURE HASH STANDARD (+ Change Notice to include SHA-224), U.S. DEPARTMENT OF COMMERCE/National Institute of Standards and Technology, 2002 August 1 [10] [FIPS180-4] Federal Information Processing Standards Publication 180-4 SECURE HASH STANDARD (SHS), U.S. DEPARTMENT OF COMMERCE/National Institute of Standards and Technology, March 2012 [FIPS197] Federal Information Processing Standards Publication 197, ADVANCED ENCRYPTION STANDARD (AES), U.S. DEPARTMENT OF COMMERCE/National Institute of Standards and Technology, November 26, 2001 [12] [ANSIX9.19] ANSI X9.19, AMERICAN NATIONAL STANDARD, Financial Institution Retail Message Authentication, 1996 [13] [ANSIX9.62] AMERICAN NATIONAL STANDARD X9.62-1999: Public Key Cryptography For The Financial Services Industry: The Elliptic Curve Digital Signature Algo- rithm (ECDSA), September 20, 1998 [14] [ISO9796-2] ISO/IEC 9796-2, Information Technology – Security Techniques – Digital Sig- nature Schemes giving message recovery – Part 2: Integer factorisation based mechanisms, 2002 [15] [ISO15946-1] ISO/IEC 15946-1. Information technology – Security techniques – Crypto- graphic techniques based on elliptic curves – Part 1: General, 2002. [16] [ISO15946-2] ISO/IEC 15946-2. Information technology – Security techniques – Crypto- graphic techniques based on elliptic curves – Part 2: Digital signatures, 2002. [17] [ISO15946-3] ISO/IEC 15946: Information technology — Security techniques — Crypto- graphic techniques based on elliptic curves — Part 3: Key establishment, 2002 [18] [PKCS3] PKCS #3: Diffie-Hellman Key-Agreement Standard, An RSA Laboratories Technical Note, Version 1.4, Revised November 1, 1993 [19] [NIST800-38B] Recommendation for Block Cipher Modes of Operation: The CMAC Mode for Authentication, NIST Special Publication 800-38B, National Institute of Standards and Technology, May 2005 [20] [RFC4493] RFC 4493, The AES-CMAC Algorithm, JH. Song et al. University of Washing- ton, Category: Informational, June 2006 [21] [Brainpool] RFC 5639 ECC Brainpool Standard Curves & Curve Generation, March 2010; available at: http://tools.ietf.org/html/rfc5639 [FIPS186-3] Digital Signature Standard (DSS) - FIPS PUB 186-3, FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATION, June, 2009 cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 93 of 97 Glossary Active authentication Security mechanism defined in [ICAODoc] by which means the MTRD’s chip proves and the inspection system verifies the identity and authenticity of the MTRD’s chip as part of a genuine MRTD issued by a known State of organization. AES The AES (Advanced Encryption Standard) has been defined as a standard for symmetric data encryption. It is a block cipher with a block length of 128 bit and key lengths of 128, 192 and 256 bit. Application note Optional informative part of the PP containing additional supporting infor- mation that is considered relevant or useful for the construction, evaluation, or use of the TOE. Asymmetric cipher Encryption procedures employing two different keys (in contrast to a symmetric cipher): one publicly known (public key) for data encryption and one key only known to the message receiver (private key) for decryption. Audit records Write-only-once non-volatile memory area of the MRTDs chip to store the Ini- tialization Data and Pre-personalization Data. Authentication Authentication defines a procedure that verifies the identity of the commu-ni- cation partner. The most elegant method is based on the use of so called digital signatures. BAC Basic access control. Security mechanism defined in [ICAODoc] by which means the MTRD’s chip proves and the inspection system protects their communica- tion by means of secure messaging. Basic access keys Pair of symmetric Triple-DES keys used for secure messaging with encryption (key KENC) and message authentication (key KMAC) of data transmitted be- tween the MRTD’s chip and the inspection system [ICAODoc]. It is drawn from the printed MRZ of the passport book to authenticate an entity able to read the printed MRZ of the passport book. Block cipher An algorithm processing the plaintext in bit groups (blocks). Its alternative is called stream cipher. CA Certification authority Certificate see digital certificate Certificate revocation list A list of revoked certificates issued by a certificate authority Certification authority An entity responsible for registering and issuing, revoking and generally manag- ing digital certificates Country signing CA cer- tificate (CCSCA) Certificate of the Country Signing Certification Authority Public Key (KPuCSCA) issued by Country Signing Certification Authority. The CCSCA is stored in the in- spection system. Country verifying CA The country specific root of the PKI of Inspection Systems. It creates the Document Verifier Certificates within this PKI. It enforces the Privacy policy of the issuing country or organization in respect to the protection of sensitive bio- metric data stored in the MRTD. CRL see Certificate Revocation List Cryptography In the classical sense, the science of encrypting messages. Today, this notion comprises a larger field and also includes problems like authentication or digital signatures. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 94 of 97 Current date The maximum of the effective dates of valid CVCA, DV and domestic Inspection System certificates known to the TOE. It is used the validate card verifiable cer- tificates. CVCA link certificate Certificate of the new public key of the Country Verifying Certification Authority signed with the old public key of the Country Verifying Certification Authority where the certificate effective date for the new key is before the certificate expiration date of the certificate for the old key. DES (Data Encryption Standard) symmetric 64 bit block cipher, which was developed (first under the name Lucifer) by IBM. The key length is 64 bit of which 8 bit serve for a parity check. DES is the classic among the encryption algorithms, which nevertheless is no longer secure due to its insufficient key length. Alternatives are Triple-DES or the successor AES. Digital certificate A data set that identifies the certification authority issuing it, identifies its owner, contains the ower's public key, identifies its operational period, and is digitally signed by the certification authority issuing it. Digital signature The counterpart of a handwritten signature for documents in digital format. A digital signature grants authentication, integrity, and non-repudiation. These features are achieved by using asymmetric procedures. Document verifier Certification authority creating the Inspection System Certificates and managing the authorization of the Extended Inspection Systems for the sensitive data of the MRTD in the limits provided by the issuing States or Organizations EAC Extended access control. Security mechanism identified in [ICAODoc] by which means the MTRD’s chip (i) verifies the authentication of the inspection systems authorized to read the optional biometric reference data, (ii) controls the access to the optional biometric reference data and (iii) protects the confidentiality and integrity of the optional biometric reference data during their transmission to the inspection system by secure messaging. ECC (Elliptic Curve Cryptography) class of procedures providing an attractive alterna- tive for the probably most popular asymmetric procedure, the RSA algorithm. Elliptic curves A mathematical construction, in which a part of the usual operations applies, and which has been employed successfully in cryptography since 1985. Fingerprint (digital) Checksum that can be used to easily determine the correctness of a key without having to compare the entire key. This is often done by comparing the hash val- ues after application of a hash function. Hash function A function which forms the fixed-size result (the hash value) from an arbitrary amount of data (which is the input). These functions are used to generate the electronic equivalent of a fingerprint. The significant factor is that it must be impossible to generate two entries which lead to the same hash value (so called collisions) or even to generate a matching message for a defined hash value. Common hash functions are RIPEMD-160 and SHA-1, each having hash values with a length of 160 bit as well as the MD5, which is still often used today having a hash value length of 128 bit. Inspection system A technical system used by the border control officer of the receiving State (i) examining an MRTD presented by the traveller and verifying its authenticity and (ii) verifying the traveller as MRTD holder. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 95 of 97 Integrity The test on the integrity of data is carried out by checking messages for changes during the transmission by the receiver. Common test procedures employ Hash- functions, MACs (Message Authentication Codes) or – with additional function- ality – digital signatures. Javacard A smart card with a Javacard operation system. Key exchange The use of symmetric cipher procedures requires that two communication part- ners decide on one joint key only known to themselves. The difficulty is that for the exchange of such information usually only partially secure channels exist. Additionally, protocols for key exchange must be prepared in such a way that only those pieces of information are exchanged which do not lead to knowledge of the real secret (the key). The most popular protocol of that type is diffie- Hellman, whose presentation in 1976 can be regarded as the birth of public key cryptography. LDS Logical data structure. The collection of groupings of data elements stored in the optional capacity expansion technology, defined in [ICAODoc]. MAC Algorithm that expands the message by means of a secret key by special redun- dant pieces of information, which are stored or transmitted together with the message. To prevent an attacker from targeted modification of the attached re- dundancy, requires its protection in a suitable way. MRTD Machnine-readable travel document. Official document issued by a State or Or- ganization which is used by the holder for international travel (e.g. passport, visa, official document of identity) and which contains mandatory visual (eye readable) data and a separate mandatory data summary, intended for global use, reflecting essential data elements capable of being machine read. MRZ Fixed dimensional area located on the front of the MRTD or MRP Data Page or, in the case of the TD1, the back of the MRTD, containing mandatory and optional data for machine reading using OCR methods. Non-repudiation One of the objectives in the employment of digital signatures. It describes the fact that the sender of a message is prevented from denying the preparation of the message. The problem cannot be simply solved with cryptographic routines, but the entire environment needs to be considered and respective framework conditions need to be provided by pertinent laws. Passive authentication (i) verification of the digital signature of the Document Security Object and (ii) comparing the hash values of the read LDS data fields with the hash values con- tained in the Document Security Object. Passphrase A long, but memorable character sequence (e.g. short sentences with punctua- tion) which should replace passwords as they offer more security. Password A secret character sequence whose knowledge is to serve as a replacement for the authentication of a participant. A password is usually short to really ensure that an attacker cannot guess the password by trial and error. Personalization The process by which the portrait, signature and biographical data are applied to the document. Personalization agent The agent acting on the behalf of the issuing State or organisation to personalize the MRTD for the holder by (i) establishing the identity the holder for the bio- graphic data in the MRTD, (ii) enrolling the biometric reference data of the MRTD holder i.e. the portrait, the encoded finger image(s) or (ii) the encoded iris image(s) and (iii) writing these data on the physical and logical MRTD for the holder. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 96 of 97 PKI Cf. Public Key Infrastructure PP Protection Profile Private key Secret key only known to the receiver of a message, which is used in asymmetric ciphers for encryption or generation of digital signatures. Pseudo random num- ber Many cryptographic mechanisms require random numbers (e.g. in key genera- tion). The problem, however, is that it is difficult to implement true random numbers in software. Therefore, so called pseudo-random number generators are used, which then should be initialized with a real random element (the so called seed). Public key Publicly known key in an asymmetric cipher which is used for encryption and verification of digital signatures. Public key infrastruc- ture (PKI) Combination of hardware and software components, policies, and different pro- cedures used to manage digital certificates. Random numbers Many cryptographic algorithms or protocols require a random element, mostly in form of a random number, which is newly generated in each case. In these cases, the security of the procedure depends in part on the suitability of these random numbers. As the generation of real random numbers within computers still imposes a problem (a source for real random events can in fact only be gained by exact observation of physical events, which is not easy to realize for a software), so called pseudo random numbers are used instead. Secure messaging Secure messaging using encryption and message authentication code according to ISO/IEC 7816-4. SFR Security functional requirement. Skimming Imitation of the inspection system to read the logical MRTD or parts of it via the contactless communication channel of the TOE without knowledge of the printed MRZ data. Smart card A smart card is a chip card which contains an internal micro controller with CPU, volatile (RAM) and non-volatile (ROM, EEPROM) memory, i.e. which can carry out its own calculations in contrast to a simple storage card. Sometimes a smart card has a numerical coprocessor (NPU) to execute public key algorithms effi- ciently. Smart cards have all of their functionality comprised on a single chip (in contrast to chip cards, which contain several chips wired to each other). There- fore, such a smart card is ideal for use in cryptography as it is almost impossible to manipulate its internal processes. SOD Document Security Object (stored in EF.SOD). A RFC3369 CMS Signed Data Structure, signed by the Document Signer (DS). Carries the hash values of the LDS Data Groups. It is stored in the MRTD’s chip. It may carry the Document Signer Certificate (CDS). ST Security Target Stream cipher Symmetric encryption algorithm which processes the plaintext bit-by-bit or byte-by-byte. The other usually employed class of procedures comprises so called block cipher. Symmetric cipher Encryption procedure using the same key for enciphering and deciphering (or, in which these two keys can simply be derived from each other). One distin- guishes between block ciphers processing plaintext in blocks of fixed length (mostly 64 or 128 bit) and stream ciphers working on the basis of single charac- ters. cv act ePasslet2.1/MRTD-EACv1-BAC Security Target 97 of 97 TOE Target of evaluation. Travel document A passport or other official document of identity issued by a State or organiza- tion, which may be used by the rightful holder for international travel. TSF TOE security functionality. Verification The process of comparing a submitted biometric sample against the biometric reference template of a single enrolee whose identity is being claimed, to de- termine whether it matches the enrolee’s template. X.509 Standard for certificates, CRLs and authentication services. It is part of the X.500 standard of the ITU-T for realization of a worldwide distributed directory service realized with open system.