FIPS 140-2 SECURITY POLICY Page 1 of 47 NON-PROPRIETARY DOCUMENT STMICROELECTRONICS Trusted Platform Module ST33TPHF20SPI & ST33TPHF20I2C ST33HTPH2E28AAF0 / ST33HTPH2E32AAF0 / ST33HTPH2E28AAF1 / ST33HTPH2E32AAF1 / ST33HTPH2028AAF3 / ST33HTPH2032AAF3 / ST33HTPH2E28AHB3 / ST33HTPH2E32AHB3 / ST33HTPH2E28AHB4 / ST33HTPH2E32AHB4 / ST33HTPH2E28AHB7 / ST33HTPH2E32AHB7 / ST33HTPH2E28AHB8 / ST33HTPH2E32AHB8 / ST33HTPH2028AHB9 / ST33HTPH2032AHB9 FIPS 140-2 Security Policy Level 2 Firmware revision: 49.00 / 4A.00 / 49.04 / 4A.04 / 49.05 / 4A.05 HW version: ST33HTPH revision A Date: 2020/07/15 Document Version: 02-03 NON-PROPRIETARY DOCUMENT FIPS 140-2 SECURITY POLICY Page 2 of 47 NON-PROPRIETARY DOCUMENT Table of Contents 1 MODULE DESCRIPTION .................................................................................................................... 3 1.1 DEFINITION..................................................................................................................................... 3 1.2 MODULE IDENTIFICATION ................................................................................................................. 3 1.2.1 AHB3 / AHB4........................................................................................................................ 3 1.2.2 AHB7 / AHB8........................................................................................................................ 4 1.2.3 AHB9 .................................................................................................................................... 5 1.2.4 AAF0 / AAF1......................................................................................................................... 6 1.2.5 AAF3..................................................................................................................................... 7 1.3 PINOUT DESCRIPTION...................................................................................................................... 8 1.3.1 SPI configuration .................................................................................................................. 8 1.3.2 I2C configuration ................................................................................................................. 10 1.4 BLOCK DIAGRAMS ......................................................................................................................... 11 1.4.1 HW block diagram .............................................................................................................. 11 1.4.2 FW block diagrams............................................................................................................. 12 1.5 SECURITY LEVELS......................................................................................................................... 14 1.6 CRYPTOGRAPHIC FUNCTIONS ........................................................................................................ 15 1.7 MODES OF OPERATION ................................................................................................................. 16 1.7.1 Security module configuration ............................................................................................ 17 1.7.2 Approved modes of operation ............................................................................................ 17 1.7.3 FIPS mode recommendations ............................................................................................ 18 1.7.4 Limited and error modes..................................................................................................... 19 1.8 PORTS AND INTERFACES ............................................................................................................... 19 2 IDENTIFICATION AND AUTHENTICATION POLICY ...................................................................... 21 2.1 ROLES.......................................................................................................................................... 21 2.2 AUTHENTICATION.......................................................................................................................... 21 2.2.1 Description.......................................................................................................................... 21 2.2.2 Authorization strength......................................................................................................... 22 2.2.3 Authorization protection...................................................................................................... 22 3 ACCESS CONTROL POLICY ........................................................................................................... 23 3.1 LIST OF KEYS AND CSPS .............................................................................................................. 23 3.2 SERVICES..................................................................................................................................... 28 3.2.1 Services list......................................................................................................................... 28 3.2.2 Authorization....................................................................................................................... 34 3.3 KEY MANAGEMENT ........................................................................................................................ 36 3.3.1 Key entry and output .......................................................................................................... 36 3.3.2 Key transport ...................................................................................................................... 37 4 SELF-TESTS...................................................................................................................................... 38 4.1 POWER-UP TESTS LIST .................................................................................................................. 38 4.2 ASYMMETRIC CRYPTOGRAPHY SELF-TESTS LIST ............................................................................. 39 4.3 CONDITIONAL TESTS LIST .............................................................................................................. 39 4.4 VERIFICATION ............................................................................................................................... 40 5 PHYSICAL SECURITY POLICY........................................................................................................ 41 6 OPERATIONAL ENVIRONMENT...................................................................................................... 42 7 MITIGATIONS OF OTHER ATTACKS .............................................................................................. 43 7.1 INTERNAL TAMPER DETECTION...................................................................................................... 43 7.2 ENVIRONMENTAL PROTECTION....................................................................................................... 43 8 REFERENCES ................................................................................................................................... 44 9 ACRONYMS....................................................................................................................................... 46 IMPORTANT NOTICE – PLEASE READ CAREFULLY........................................................................... 47 FIPS140-2 SECURITY POLICY Page 3 of 47 NON-PROPRIETARY DOCUMENT 1 MODULE DESCRIPTION 1.1 Definition The ST33TPHF20SPI / ST33TPHF20I2C Trusted Platform Module are fully integrated security modules designed to be integrated into personal computers and other embedded systems. The security module is used primarily for cryptographic key generation, key storage and key management as well as generation and secure storage for digital certificates. The TPM is a single chip cryptographic HW module as defined in [FIPS 140-2]. The single silicon chip is encapsulated in a hard, opaque, production grade integrated circuit (IC) package. The cryptographic boundary is defined as the perimeter of the IC package. The security module supports SPI and I2 C interfaces compliant with the Trusted Computing Group (TCG) specification for PC Client [PTP 0.43]. The HW and FW cryptographic boundaries are indicated in §1.4 of the current document. The security module implements version 2.0 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). 1.2 Module identification The hardware and firmware versions covered by the FIPS evaluation are identified as follow:  Hardware version: ST33HTPH revision A  Firmware version: 49.00 (SPI) / 4A.00 (SPI) / 49.04 (SPI) / 4A.04 (SPI) / 49.05 (I2C) / 4A.05 (I2 C) FW version can be retrieved via response to the command TPM2_GetCapability with property set to TPM_PT_FIRMWARE_VERSION_1. The cryptographic services are provided by the cryptographic library “NesLib 5.1 for ST33”. The product is manufactured in two packages:  TSSOP28  TSSOP 28-pin  4.4 x 9.7 mm  VQFN32  Very thin pitch Quad pack no-lead 32-pin  5 x 5 mm The security module is available in the following configurations: 1.2.1 AHB3 / AHB4 These configurations of the security module implement both version 1.2 and version 2.0 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). Versions are exclusive and security module manufactured will operate in a default mode (TPM1.2 or TPM2.0) depending on the configuration. The current FIPS 140-2 level2 security policy applies to these security module configurations when the module is irreversibly locked in TPM2.0 mode (cf. §1.7.3 for mode lock recommendations). As a consequence the TPM FW version 1.2 is excluded from the security requirements of FIPS 140-2. FIPS140-2 SECURITY POLICY Page 4 of 47 NON-PROPRIETARY DOCUMENT Table 1: Security module configurations Module configuration Product name / HW version ST33TPHF2ESPI/ ST33HTPH revision A Package TSSOP28 VQFN32 TSSOP28 VQFN32 Part number ST33HTPH2E28 AHB3 ST33HTPH2E32 AHB3 ST33HTPH2E28 AHB4 ST33HTPH2E32 AHB4 Default mode TPM1.2 TPM2.0 Marking P68HAHB3 P68HAHB4 FW version 49.04 P68HAHB3 corresponds to the module configured by default in TPM1.2 execution mode. This module is listed as it can be configured in TPM2.0 execution mode as described in §1.7. P68HAHB4 corresponds to the module configured by default in TPM2.0 execution mode. Figure 1: Picture of the Cryptographic Module (TSSOP28) – Marking P68HAHB3 & P68HAHB4 Figure 2: Picture of the Cryptographic Module (VQFN32) – Marking P68HAHB3 & P68HAHB4 1.2.2 AHB7 / AHB8 These configurations of the security module implement both version 1.2 and version 2.0 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). Versions are exclusive and security module manufactured will operate in a default mode (TPM1.2 or TPM2.0) depending on the configuration. The current FIPS 140-2 level2 security policy applies to these security module configurations when the module is irreversibly locked in TPM2.0 mode (cf. §1.7.3 for mode lock recommendations). As a consequence the TPM FW version 1.2 is excluded from the security requirements of FIPS 140-2. Table 2: Security module configurations Module configuration Product name / HW version ST33TPHF2EI2C/ ST33HTPH revision A Package TSSOP28 VQFN32 TSSOP28 VQFN32 Part number ST33HTPH2E28 AHB7 ST33HTPH2E32 AHB7 ST33HTPH2E28 AHB8 ST33HTPH2E32 AHB8 Default mode TPM1.2 TPM2.0 FIPS140-2 SECURITY POLICY Page 5 of 47 NON-PROPRIETARY DOCUMENT Marking P68HAHB7 P68HAHB8 FW version 49.05 P68HAHB7 corresponds to the module configured by default in TPM1.2 execution mode. This module is listed as it can be configured in TPM2.0 execution mode as described in §1.7. P68HAHB8 corresponds to the module configured by default in TPM2.0 execution mode. Figure 3: Picture of the Cryptographic Module (TSSOP28) – Marking P68HAHB7 & P68HAHB8 Figure 4: Picture of the Cryptographic Module (VQFN32) – Marking P68HAHB7 & P68HAHB8 1.2.3 AHB9 This configuration of the security module implement only the version 2.0 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). The current FIPS 140-2 level2 security policy always applies (no mode lock requested) to this security module configuration. Table 3: Security module configuration Module configuration Product name / HW version ST33TPHF20I2C/ ST33HTPH revision A Package TSSOP28 VQFN32 Part number ST33HTPH2028AHB9 ST33HTPH2032AHB9 Marking P68HAHB9 FW version 4A.05 Figure 5: Picture of the Cryptographic Module (TSSOP28) – Marking P68HAHB9 Figure 6: Picture of the Cryptographic Module (VQFN32) – Marking P68HAHB9 FIPS140-2 SECURITY POLICY Page 6 of 47 NON-PROPRIETARY DOCUMENT 1.2.4 AAF0 / AAF1 These configurations of the security module implement both version 1.2 and version 2.0 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). Versions are exclusive and security module manufactured will operate in a default mode (TPM1.2 or TPM2.0) depending on the configuration. The current FIPS 140-2 level2 security policy applies to these security module configurations when the module is irreversibly locked in TPM2.0 mode (cf. §1.7.3 for mode lock recommendations). As a consequence the TPM FW version 1.2 is excluded from the security requirements of FIPS 140-2. Table 4: Security module configurations Module configuration Product name / HW version ST33TPHF2ESPI/ ST33HTPH revision A Package TSSOP28 VQFN32 TSSOP28 VQFN32 Part number ST33HTPH2E28 AAF0 ST33HTPH2E32 AAF0 ST33HTPH2E28 AAF1 ST33HTPH2E32 AAF1 Default mode TPM1.2 TPM2.0 Marking P68HAAF0 P68HAAF1 FW version 49.00 / 49.041 Figure 7: Picture of the Cryptographic Module (TSSOP28) – Marking Figure 8: Picture of the Cryptographic Module (VQFN32) – Marking P68HAAF0 corresponds to the module configured by default in TPM1.2 execution mode. This module is listed as it can be configured in TPM2.0 execution mode as described in §1.7. P68HAAF1 corresponds to the module configured by default in TPM2.0 execution mode. 1 The default FW version of this configuration is 49.00. To operate with FW version 49.04, module FW must be first field upgraded from 49.00 to 49.04. FIPS140-2 SECURITY POLICY Page 7 of 47 NON-PROPRIETARY DOCUMENT 1.2.5 AAF3 This configuration of the security module implement only the version 2.0 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). The current FIPS 140-2 level2 security policy always applies (no mode lock requested) to this security module configuration. Table 5: Security module configuration Module configuration Product name / HW version ST33TPHF20SPI/ ST33HTPH revision A Package TSSOP28 VQFN32 Part number ST33HTPH2028AAF3 ST33HTPH2032AAF3 Marking P68HAAF3 FW version 4A.00 / 4A.041 Figure 9: Picture of the Cryptographic Module (TSSOP28) – Marking Figure 10: Picture of the Cryptographic Module (VQFN32) – Marking 1 The default FW version of this configuration is 4A.00. To operate with FW version 4A.04, module FW must be first field upgraded from 4A.00 to 4A.04 FIPS140-2 SECURITY POLICY Page 8 of 47 NON-PROPRIETARY DOCUMENT 1.3 Pinout description The pin layouts for the ST33TPHF20SPI are shown in Figure 11 and in Figure 12: VQFN32 Pinout Diagram. The pin layouts for the ST33TPHF20I2C are shown in Figure 13: TSSOP28 Pinout Diagram and Figure 14: VQFN32 Pinout Diagram. 1.3.1 SPI configuration Figure 11: TSSOP28 Pinout Diagram Figure 12: VQFN32 Pinout Diagram FIPS140-2 SECURITY POLICY Page 9 of 47 NON-PROPRIETARY DOCUMENT Next table gives a description of the products pins. Table 6: ST33TPHF20 Pin definition (SPI configuration) Signal Type Description VPS Input Power supply. This pin must be connected to 1.8V or 3.3V DC power rail supplied by the motherboard. GND Input GND has to be connected to the main motherboard ground. SPI_RST Input SPI Reset used to re-initialize the device MISO Output SPI Master Input, Slave Output (output from slave) MOSI Input SPI Master Output, Slave Input (output from master) SPI_CLK Input SPI serial clock (output from master) SPI_CS Input SPI slave select (active low; output from master) SPI_PIRQ Output SPI IRQ used by TPM to generate an interrupt PP Input Physical presence, active high, internal pull-down. Used to indicate Physical Presence to the TPM. NiC - Not internally connected: not connected to the die. May be left unconnected but no impact on TPM if connected. NC - Not Connected: connected to the die but not usable. May be left unconnected. Internal pull-down. FIPS140-2 SECURITY POLICY Page 10 of 47 NON-PROPRIETARY DOCUMENT 1.3.2 I2C configuration Figure 13: TSSOP28 Pinout Diagram Figure 14: VQFN32 Pinout Diagram Next table gives a description of the products pins. Table 7: ST33TPHF20 Pin definition (I²C configuration) Signal Type Description VPS Input Power supply. This pin must be connected to 1.8V or 3.3V DC power rail supplied by the motherboard. GND Input GND has to be connected to the main motherboard ground. RESET Input Reset used to re-initialize the device SCL Input I²C serial clock (Open drain with no weak pull-up resistor) SDA Input/Output I²C serial data (Open drain with no weak pull-up resistor) PIRQ Output IRQ used by TPM to generate an interrupt GPIO1 Input/Output GPIO default to low (not used, reserved for future use) GPIO2 Input/Output GPIO default to low (not used, reserved for future use) GPIO3 Input/Output GPIO default to low (not used, reserved for future use) PP Input Physical presence, active high, internal pull-down. Used to indicate Physical Presence to the TPM. NiC - Not internally connected: not connected to the die. May be left unconnected but no impact on TPM if connected. NC - Not Connected: connected to the die but not usable. May be left unconnected. Internal pull-down. SDA 1 28 GPIO3 SCL 2 27 GPIO2 NiC 3 26 NiC NiC 4 25 NiC NiC 5 24 NiC NC 6 23 NiC PP 7 22 NiC NiC 8 21 NiC NiC 9 20 PIRQ VPS 10 19 NiC GND 11 18 NiC NiC 12 17 NiC NiC 13 16 RESET NiC 14 15 GPIO1 TSSOP28 VQFN32 VPS 1 24 NiC NiC 2 23 NiC NiC 3 22 NiC PP 4 21 NiC NiC 5 20 NiC NC 6 19 NiC NiC 7 18 PIRQ NiC 8 17 RESET GND 9 32 NiC NiC 10 31 NiC NiC 11 30 SCL NiC 12 29 SDA GPIO1 13 28 GPIO3 NiC 14 27 GPIO2 NiC 15 26 NiC NiC 16 25 NiC FIPS140-2 SECURITY POLICY Page 11 of 47 NON-PROPRIETARY DOCUMENT 1.4 Block diagrams 1.4.1 HW block diagram A block diagram of the hardware ST33HTPH (with its associated cryptographic boundary) is provided in Figure 15. TPM is composed of:  A SecurCore® SC300™ CPU core including a MPU (Memory Protection Unit)  Memories (RAMs, Flash and ROM)  HW accelerators for CRC (16 and 32-bits) and cryptographic operations (symmetric with EDES+ and AES and asymmetric with NESCRYPT)  A clock generator and three 16-bit timers  NDRNG (non-deterministic random bit generator)  SPI master/slave block  A security administration block dedicated to chip security configuration and alarms detection  FW and data stored in the memory areas Figure 15: ST33HTPH block diagram SecurCore® SC300™ CPU Core MPU I/D bus S bus RAM Flash memory ST ROM firewall ST ROM APB/AHB bridge APB AES HW accelerator EDES+ HW accelerator CRC HW accelerator Clock generator Timers NDRNG NESCRYPT HW accelerator with RAM Security Administrator SPI with RAM buffer Power mngt VCC GND SPI / I2C interface Cryptographic boundary GPIOs FIPS140-2 SECURITY POLICY Page 12 of 47 NON-PROPRIETARY DOCUMENT 1.4.2 FW block diagrams Block diagrams of the TPM FW are provided at Figure 16: TPM FW block diagram (TPM2E) and Figure 17: TPM FW block diagram. 1.4.2.1 AAF0 / AAF1 / AHB3 / AHB4 / AHB7 / AHB8 Figure 16: TPM FW block diagram (TPM2E) TPM FW is composed of:  Non-upgradable code blocks located in ROM & flash memories (depicted in orange)  Boot code  Cryptographic library  HW and memory low-level services  Upgradable code blocks via secure field upgrade mechanism (blue and green boxes)  Application flash loader (AFL) in charge of TPM field upgrade  TPM1.2 core (irreversibly deactivated as indicated in §1.7.1)  TPM1.2 commands code (irreversibly deactivated as indicated in §1.7.1)  TPM2.0 core  TPM2.0 commands code  Low-level services API (incl. cryptographic services, memory management, …) TPM1.2 core TPM1.2 commands AFL Boot Low-level services API Cryptographic library HW and memory services TPM2.0 core TPM2.0 commands FIPS140-2 SECURITY POLICY Page 13 of 47 NON-PROPRIETARY DOCUMENT 1.4.2.2 AAF3 / AHB9 Figure 17: TPM FW block diagram (TPM20) TPM FW is composed of:  Non-upgradable code blocks located in ROM & flash memories (depicted in orange)  Boot code  Cryptographic library  HW and memory low-level services  Upgradable code blocks via secure field upgrade mechanism (blue and green boxes)  Application flash loader (AFL) in charge of TPM field upgrade  TPM2.0 core  TPM2.0 commands code  Low-level services API TPM2.0 core TPM2.0 commands AFL Boot Low-level services API Cryptographic library HW and memory services FIPS140-2 SECURITY POLICY Page 14 of 47 NON-PROPRIETARY DOCUMENT 1.5 Security levels The cryptographic module meets the overall requirements applicable to Level 2 security of FIPS 140-2. Table 8: Module Security Level Specification Security Requirements Section Level Cryptographic Module Specification 2 Cryptographic Module Ports and Interfaces 2 Roles, Services and Authentication 2 Finite State Model 2 Physical Security 2 Operational Environment N/A Cryptographic Key Management 2 EMI/EMC 2 Self-Tests 2 Design Assurance 2 Mitigation of Other Attacks 2 Overall 2 FIPS140-2 SECURITY POLICY Page 15 of 47 NON-PROPRIETARY DOCUMENT 1.6 Cryptographic functions The security module supports the following cryptographic algorithms (both approved and non- approved). Algorithm certificate numbers for each approved algorithm are listed below. All algorithms, keys size or curve lengths listed below are part of services offered by the module. Table 9: Approved algorithms CAVP Cert Algorithm Standard Mode / Method Key lengths, curves or moduli Use 2342 & 2340 RSA FIPS 186-4 SHA-256, RSASSA-PKCS-v1.5 2048 Digital signature generation FIPS 186-4 SHA-11 , SHA-256, RSASSA-PKCS-v1.5, RSASSA-PSS 10242 , 2048 Digital signature verification FIPS 186-4 Appendix C3.1 2048 Key generation 1045 & 1041 CVL RSADP FIPS 186-4 RSA decryption primitive 2048 Key transport 1025 ECDSA FIPS 186-4 SHA-256 P-224, P-256 Digital signature generation FIPS 186-4 SHA-1, SHA-256 P-224, P-256 Digital signature verification FIPS 186-4 Appendix B.4.2 P-224, P-256 Key generation FIPS 186-4 - P-224, P-256 Key verification 2870 & 2875 & 3118 & 3120 & 3122 & 3124 HMAC (single call) FIPS 198-1 SHA-1, SHA-256 160, 256 Message authentication 2878 & 2876 & 3119 & 3121 & 3123 & 3125 HMAC (sequence) FIPS 198-1 SHA-1, SHA-256 160, 256 Message authentication 123 & 121 & 146 & 147 & 148 & 149 KBKDF SP 800-108 CTR Key derivation 1361 DRBG SP 800-90A HASH_based Deterministic random bit generation 4338 & 4336 AES FIPS 197, SP 800-38A ECB, CFB128, OFB, CBC, CTR 128, 192, 256 Data encryption/decryption 2345 & 2343 Triple-DES SP 800-67, SP 800-38A TECB, TCBC, TCFB64, TOFB, CTR 192 Data decryption3 NA KTS (AES cert #4338 + HMAC cert #2870) KTS (AES cert #4338 + HMAC cert #3118) SP 800-38F CFB 128, 256 Key transport 1 Legacy use only 2 Legacy use only 3 Legacy use only. Triple-DES encryption was CAVP tested but is not used in approved mode. FIPS140-2 SECURITY POLICY Page 16 of 47 NON-PROPRIETARY DOCUMENT KTS (AES cert #4338 + HMAC cert #3120) KTS (AES cert #4336 + HMAC cert #2875) KTS (AES cert #4336 + HMAC cert #3122) KTS (AES cert #4336 + HMAC cert #3124) 3539 SHS FIPS 180-4 SHA-1, SHA-256 Message digest Vendor affirmation CKG SP800-133 (per IG D.12) Direct generation, Generation Key generation1 KTS RSA SP800-56B KTS-OAEP-basic 2048 Key transport KAS SSC SP800-56A Rev3 ECC P-224, P-256 Key agreement scheme – shared secret computation KDA SP800-56C Rev 1 Key derivation Table 10: Allowed algorithms Algorithm Caveat Use NDRNG NA Seed or reseed DRBG 800-90A (with approximatively 366 bits of entropy). Generate random numbers not dedicated to be used as cryptographic material. Table 11: Non-approved algorithms Algorithm Use RSA (key length = 1024 bits) Key and digital signature generation SHA-1 Digital signature generation ECSchnorr Digital signature generation and verification ECDAA Digital signature generation Triple-DES2 Data encryption 1.7 Modes of Operation This security policy only applies to the security module when TPM operator follows the recommendations from:  §1.7.1 to set and irreversibility lock the security module in the TPM2.0 mode and exclude the non-compliant mode TPM1.2 that is outside the scope of the evaluation 1 Symmetric keys and seeds used for generating the asymmetric keys are either generated by using KBKDF or DRBG methods. Methods are detailed per CSPs in Table 17: Keys and CSPs list. 2 According to [SP800-131A] that indicates three-key TDEA encryption as disallowed after 2023. FIPS140-2 SECURITY POLICY Page 17 of 47 NON-PROPRIETARY DOCUMENT  §1.7.2 to execute all self-tests required in a FIPS 140-2 approved mode of operation  §1.7.3 to use the security module in a FIPS 140-2 approved mode of operation 1.7.1 Security module configuration 1.7.1.1 AAF0 / AHB3 / AHB7 These security module configurations implement both TPM1.2 and TPM2.0 specifications and are set to operate by default in TPM1.2 mode. To set and irreversibility lock the security module in the TPM2.0 mode, TPM operator shall:  Execute the TPM_SetMode proprietary command with the following parameters: o mode = 0x01 (TPMLib SET to switch to TPM2.0) o modeLock = 0x01 (TPMLibLock SET to lock the selected mode)  Reset the TPM 1.7.1.2 AAF1 / AHB4 / AHB8 These security module configurations implement both TPM1.2 and TPM2.0 specifications and are set to operate by default in TPM2.0 mode. To irreversibility lock the security module in the TPM2.0 mode, TPM operator shall:  Execute the TPM2_SetMode proprietary command with the following parameters: o mode = 0x01 (TPMLib SET to maintain the module in TPM2.0 mode) o modeLock = 0x01 (TPMLibLock SET to lock the selected mode)  Reset the TPM 1.7.1.3 AAF3 / AHB9 No action requested for these security modules configurations. 1.7.2 Approved modes of operation TPM supports 2 sequential approved modes of operation. 1.7.2.1 Approved mode 1 This mode is the default mode when TPM starts. This mode is limited to a subset of TPM services. Table 12: Approved mode 1 Properties Description Definition Transient mode of operation when TPM is power-up and before TPM2_SelfTest(full=YES) execution Configuration No configuration required Services available List of available services is indicated in last column of Table 18: Command support table. Algorithms used SHA / HMAC / AES / DRBG / KDF / Triple-DES decryption CSPs used List of CSPs that might be accessed in this mode is indicated in Table 18: Command support table. Self-tests SHS / HMAC / AES / DRBG / KDF / Triple-DES / HW integrity / FW integrity / NDRNG FIPS140-2 SECURITY POLICY Page 18 of 47 NON-PROPRIETARY DOCUMENT 1.7.2.2 Approved mode 2 This mode is the full FIPS approved mode of operation. Table 13: Approved mode 2 Properties Description Definition Full approved mode of operation Configuration TPM2_SelfTest(full=YES) execution Services available All services Algorithms used All supported algorithms (cf. §1.6) CSPs used All CSPs Self-tests SHS / HMAC / AES / DRBG / KDF / Triple-DES / RSA / ECDH / ECDSA / HW integrity / FW integrity / NDRNG 1.7.3 FIPS mode recommendations To use the TPM in a FIPS approved mode of operation (valid for mode1 and mode2), the TPM operator shall:  Use an encryption session for the commands that inputs/outputs CSPs (List is indicated at §3.3.1). For commands without authorization, encryptedSalt used in TPM_StartAuthSession on encryption session creation must be different from the empty buffer.  Use an approved symmetric algorithm (AES) for encryption sessions  Use authorization session based on HMAC or policy (no password allowed, cf. §2.2.1).  Duplicate only objects with encryptedDuplication attribute set.  Not use FIPS 140-2 non-approved algorithms: o SHA-1 for RSA digital signature generation o EC Schnorr for ECC digital signature generation o ECDAA for ECC digital signature generation For the following services: o TPM2_Sign, TPM2_Certify, TPM2_CertifyCreation, TPM2_Quote, TPM2_GetSessionAuditDigest, TPM2_GetCommandAuditDigest, TPM2_GetTime, TPM2_NV_Certify, TPM2_Commit  Not use TPM2_LoadExternal service to load Triple-DES keys into the TPM.  Not use Triple-DES keys for data encryption with TPM2_EncryptDecrypt service and for key generation with TPM2_CreatePrimary or TPM2_Create services.  Use a policy including TPM2_PolicyAuthValue as a minimum in the policy sequence in case authorization is ensured by policy (authorization by policy must be at least as secure as authorization by HMAC).  Use TPM2_HierarchyChangeAuth after first TPM init or after each TPM2_Clear to set the authorization value for the endorsement, platform, owner and lockout hierarchies.  Use TPM2_CreatePrimary command only for RSA and ECC key with default template. If operator does not strictly follow the FIPS approved mode recommendations (ex: use of XOR instead of AES in encryption session), TPM is considered as being in a FIPS non-approved mode of operation. To use the TPM in a FIPS approved mode if it was previously used in a FIPS non-approved mode, the operator shall: FIPS140-2 SECURITY POLICY Page 19 of 47 NON-PROPRIETARY DOCUMENT  Zeroize all data listed in Table 17: Keys and CSPs list that could potentially be reused as CSPs in FIPS approved mode To use the TPM in a FIPS non-approved mode if it was previously used in a FIPS approved mode, the operator shall:  Zeroize all CSPs listed in Table 17: Keys and CSPs list that could potentially be used by FIPS non-approved algorithms in FIPS approved mode 1.7.4 Limited and error modes TPM may reach specific states depending on sequence of operation that occurred. 1.7.4.1 Shutdown mode The shutdown mode is an infinite HW reset loop that may be exit only by a power-off/power- on sequence. This state is entered when TPM detects that a FW integrity check failed during the TPM boot sequence. 1.7.4.2 Failure mode Failure mode is a state of TPM that restricts the commands that can be executed to TPM2_GetCapability / TPM2_GetTestResult. TPM answers to all other commands with a specific error code: TPM_RC_FAILURE (0x101). This state is entered when one (except FW integrity test) of the self-tests fails. 1.7.4.3 Reduced mode The reduced mode is a specific state of the field upgrade mode (refer to §6) that can be reached if the on-going field upgrade procedure failed due to an error detected in the field upgrade commands received. In reduced mode, only a subset of commands might be executed: TPM2_FieldUpgradeStart / TPM2_FieldUpgradeData / TPM2_GetCapability / TPM2_GetTestResult / TPM2_SelfTest. TPM answers to all other commands with the error TPM_RC_COMMAND_CODE (0x143). Reduced mode can be exited in case of the reception of a successful TPM2_FieldUpgradeStart command that reloads the previous installed firmware. 1.8 Ports and interfaces The physical port of the security module is the SPI bus or I2C Bus. The logical interfaces and their mapping to physical ports of the module are described below: Table 14 : Ports and interfaces Logical interface Description Physical port Control Input Interface Control Input commands issued to the security module SPI : SPI_CS / SPI_CLK / MOSI / SPI_RST / PP I2 C : SCL / SDA / RESET / PP Status Output Interface Status data output by the chip SPI : SPI_CS / SPI_CLK / MISO / SPI_PIRQ I2 C : SCL / SDA / PIRQ Data Input Interface Data provided to the chip as part of the data processing commands SPI : SPI_CS / SPI_CLK / MOSI I2 C : SCL / SDA Data Output Interface Data output by the chip as part of the data processing command SPI : SPI_CS / SPI_CLK / MISO I2 C : SCL / SDA Power interface Power interface of the chip VPS / GND Here are some details concerning the ports and interfaces of TPM: FIPS140-2 SECURITY POLICY Page 20 of 47 NON-PROPRIETARY DOCUMENT 1. The module does not include a maintenance interface. 2. Control and data inputs are multiplexed over the same physical interface. Control and data are distinguished by properly parsing input TPM command parameters according to input structures description, indicated for each command in [TPM2.0 Part3 r1.16]1. 3. Status and data output are multiplexed over the same physical interface. Status and data are distinguished by properly setting output TPM response parameters according to output structures description, indicated for each command in [TPM2.0 Part3 r1.16]. 4. The logical state machine and the command structure parsing of the module prevent from using input data externally from the “data input path” and prevent from outputting data externally from the “data output path”. 5. While performing key generation or key zeroization (no manual key entry on TPM), the output data path is logically disconnected while the output status path remains connected to report any possible failure during command processing. Generally, the output data path is only connected when TPM outputs response containing data. 6. Plaintext data can be output through usage of:  TPM2_Unseal, TPM2_RSA_Decrypt, TPM2_EncryptDecrypt To prevent inadvertent release of the plaintext data, command performs:  Check of command input structure  Check of command authorization  Decryption of the input blob with private part of specified key However an encryption session might be used with these commands to avoid releasing plaintext data. 7. The logical state machine and command structure of the module guarantees the inhibition of all data output via the data output interface whenever an error state exists and while doing self-tests. 1 Some commands only deal with control input and status output parameters FIPS140-2 SECURITY POLICY Page 21 of 47 NON-PROPRIETARY DOCUMENT 2 IDENTIFICATION AND AUTHENTICATION POLICY This chapter gives details about the roles managed by TPM. 2.1 Roles Services proposed by TPM are accessible under different roles. Next table defines the different roles supported by the TPM. Table 15: Roles Role Description Type of authentication Authentication data Crypto officer (CO) Role that requires knowledge of the authValue or authPolicy associated to one of the hierarchy (incl. lockout). Role based 256-bit secret data (authValue and/or authPolicy) User (U) Role that requires knowledge of the authValue or authPolicy associated to one object or NV index. Role based 160-bit or 256-bit secret data (authValue and/or authPolicy). Authorization depends on userWithAuth object attribute. Admin (A) The object Administrator controls the certification of an object (TPM2_Certify and TPM2_ActivateCredential) and controls changing of the authValue of an object (TPM2_ObjectChangeAuth). Role based 160-bit or 256-bit secret data (authValue and/or authPolicy). Authorization depends on adminWithPolicy object attribute. DUP (D) This authorization role is only used for TPM2_Duplicate(). If duplication is allowed, authorization must always be provided by a policy session and the authPolicy equation of the object must contain a command that sets the policy command code to TPM_CC_Duplicate. Role based 160-bit or 256-bit secret data (authPolicy). Some commands can also be executed without any authorization role. Those commands are marked as NA in the service list table (Table 18: Command support table). The security module does NOT provide a Maintenance Role or Maintenance Interface and does NOT support concurrent operators. Roles are implicitly selected by TPM operator on command execution (cf. Table 18 for correspondence between service and supported role) by proving knowledge of the authorization value or knowledge of the policy sequence (nature of authorization session indicates the type of authorization) that are associated with the object the command is operating on. An operator might switch from one role to another by executing commands requiring different roles and proving knowledge of the authorization value or policy sequence of objects the role is associated to. 2.2 Authentication 2.2.1 Description In FIPS approved mode of operation, TPM uses a mechanism for authorization that consists in: 1. Opening an authorization session that may be of the following types: a. HMAC b. Policy FIPS140-2 SECURITY POLICY Page 22 of 47 NON-PROPRIETARY DOCUMENT 2. Executing the expected policy commands sequence in case of policy authorization session (defined policy must follow recommendations listed in §1.7.3). 3. Do the comparison between reference value and computed value. If both match, command execution is authorized. More details on HMAC and policy sessions can be found in §19 of [TPM2.0 Part1 r1.16]. 2.2.2 Authorization strength As minimum value of authorization or policy values might be 160-bit random values (based on unbiased distribution of ‘0’ and ‘1’), the probability for an attacker to guess the authorization data is: 1 2160 = 6.84 ∗ 10−49 This value is then higher than the minimum of 1*10-6 required by [FIPS140-2]. The number of attempts per minute that an attacker can make is limited by the DAM (Dictionary Attack Mechanism). DAM consists in counting the number of failed authentication. When this counter reaches a pre-defined threshold, a lockout period is started. During this period, no authorized command execution is allowed and a specific error is returned in TPM response until period expires. Next table indicates the threshold values and the lockout durations: Table 16: DAM lockout durations Failed authentication counter >31 Lockout period (in seconds) 7200 This table indicates that an attacker can do a maximum (during the first minute) of 32 trials per minute before DAM being active. As a result the probability per minute that a random attempt will lead to a successful authorization matches FIPS requirements. Value is equal to: 32 ∗ 1 2160 = 2.19 ∗ 10−47 This value is then higher than the minimum of 1*10-5 required by [FIPS140-2]. NB: commands handling (reception, processing and response sending) is negligible compared to the lockout periods and not taken into account in the above computation. NB2: DAM parameters might be changed by using TPM2_DictionnaryAttackParameters command. However to operate in a FIPS approved mode, they shall not be changed in order not to decrease the authorization strength computed above. 2.2.3 Authorization protection By following recommendations to operate in FIPS mode of operation, authorization data associated to objects, NV indexes or hierarchies are never output from TPM in plaintext form and thus are protected from unauthorized disclosure. Authorization can be changed via the following services:  TPM2_ObjectChangeAuth  TPM2_HierarchyChangeAuth  TPM2_NV_ChangeAuth As indicated in Table 18, roles that imply authentication are associated with these services meaning that authentication are protected against unauthorized modification and substitution. TPM authorization mechanism (HMAC or policy digest comparison) does not provide any information about authentication data or policy sequence. Authentication indicates pass (command executed) or fail (command not executed) and does not provide feedback that could weaken the strength of authentication. FIPS140-2 SECURITY POLICY Page 23 of 47 NON-PROPRIETARY DOCUMENT 3 ACCESS CONTROL POLICY This chapter gives details about the services, keys and CSPs that the TPM manages. 3.1 List of Keys and CSPs Table 17: Keys and CSPs list Keys/CSPs Description Zeroized Index Name Hierarchies 1 nullSeed 32 bytes primary seed values resp. for NULL, platform, endorsement and storage hierarchies. NullSeed is a random value generated by HDRBG at each TPM power-up. PpSeed / epSeed / spSeed are random values generated by HDRBG at first TPM power-up. They are used as keys for:  KDFa to derive seedValue and sensitive during object creation (cf. [TPM2.0 Part1 r1.16] §27.6.4)  KDFa to generate a symmetric encryption key used in TPM2B_PRIVATE structure en/decryption.  KDFa to generate HMAC key used in TPM2B_PRIVATE integrity protection generation or verification They are used as seeds for:  DRBG to generate random as input to prime numbers (RSA) and private key generation (ECC) TPM reset 2 ppSeed TPM2_Change PPS 3 epSeed TPM2_Change EPS 4 spSeed TPM2_Clear 5 nullProof 32 bytes secret values resp. for NULL, platform, endorsement and storage hierarchies. NullProof is a random value generated by HDRBG at each TPM power-up. PhProof / ehProof / shProof are random values generated by HDRBG at first TPM power-up. They are used as keys for:  KDFa to generate context encryption key and IV (cf. [TPM2.0 Part1 r1.16] §30.3.1)  HMAC to compute context blob integrity (cf. [TPM2.0 Part1 r1.16] §30.3.2)  HMAC to compute/verify tickets shProof is used also as key for:  KDFa to generate obfuscation value used in attestation commands (cf. [TPM2.0 Part1 r1.16] §36.7) TPM reset 6 phProof TPM2_Change PPS 7 ehProof TPM2_Clear 8 shProof TPM2_Clear 9 platformAuth 32 bytes authorization data (authValue) used in authorization session based resp. on platform, endorsement, and storage or lockout hierarchy authorization. PlatformAuth is set to 0 at each TPM2_Startup (CLEAR). EndorsementAuth / ownerAuth / lockoutAuth are set to 0 at first TPM power-up. Primary auth values can be changed with command TPM2_HierarchyChangeAuth. They are used as keys for:  HMAC authorization in case of unsalted and unbound session  KDFa to generate session key used in HMAC authorization in case of bound session They are used as part of keys for:  HMAC authorization in case of salted or bound session (key is concatenation of sessionKey and authValue)  KDFa to generate session key used in HMAC authorization in case of salted and bound session (key is concatenation of authValue and salt) TPM2_Startup 10 endorsementAuth TPM2_Clear / TPM2_Change EPS 11 ownerAuth TPM2_Clear 12 lockoutAuth TPM2_Clear FIPS140-2 SECURITY POLICY Page 24 of 47 NON-PROPRIETARY DOCUMENT They are used as reference values for comparison in case of password authorization session. 13 platformPolicy 32 bytes authorization data (authPolicy) used in authorization session based resp. on platform, endorsement, storage or lockout hierarchy policy. platformPolicy is set to 0 at each TPM2_Startup (CLEAR). endorsementPolicy / ownerPolicy / lockoutPolicy are set to 0 at first TPM power- up. Primary policies can be changed with command TPM2_SetPrimaryPolicy. They are used as reference values for a comparison in case of policy session. TPM2_Change PPS 14 endorsementPolicy TPM2_Clear / TPM2_Change EPS 15 ownerPolicy TPM2_Clear 16 lockoutPolicy TPM2_Clear Objects 17 authValue 0 to 32 bytes authorization data defined during object creation (TPM2_Create/TPM2_CreatePrimary) used to authorize commands based on this object. Value can be changed with command TPM2_ObjectChangeAuth. It is used as:  HMAC and/or KDFa keys or part of keys in authorization session based on HMAC or password (usage is the same than for CSPs 9/10/11/12)  Secret value extended into policyDigest on TPM2_PolicySecret command TPM2_Clear (owner & endorsement) TPM2_Change PPS (platform) TPM2_Change EPS (endorsement) 18 authPolicy 0 to 32 bytes authorization data defined during object creation (TPM2_Create/TPM2_CreatePrimary) used to authorize commands based on this object. It is used as reference value for a comparison in case of policy session TPM2_Clear (owner & endorsement) TPM2_Change PPS (platform) TPM2_Change EPS (endorsement) 19 seed 32 random bytes generated by HDRBG if object parent is not a hierarchy (if hierarchy, primary seed is used, cf. CSPs 1/2/3/4). It is used as key for:  KDFa to generate seedValue and sensitive during object creation (cf. [TPM2.0 Part1 r1.16] §27.6.4) Transient value only available during object creation 20 seedValue 32 bytes generated from seed (CSP 19) or one of the primary seeds (CSP 1/2/3/4) through use of KDFa. Set to 0 for asymmetric keys that are not used as storage key. It is used (when not set to 0) as:  Data in SHA computation to generate object’s unique value (HMAC and symmetric key creation)  Key in KDFa to generate a symmetric encryption key used in TPM2B_PRIVATE structure en/decryption.  Key in KDFa to generate HMAC key used in TPM2B_PRIVATE integrity protection generation or verification TPM2_Clear (owner & endorsement) TPM2_Change PPS (platform) TPM2_Change EPS (endorsement) 21 symKey 16 bytes generated from derivation of seedValue through KDFa usage. It is used as key for:  Symmetric en/decryption of TPM2B_PRIVATE structure Transient value only available during command processing 22 hmacKey 32 bytes generated from derivation of seedValue through KDFa usage. It is used as key for: Transient value only available during command processing FIPS140-2 SECURITY POLICY Page 25 of 47 NON-PROPRIETARY DOCUMENT  HMAC used in TPM2B_PRIVATE integrity protection generation or verification 23 sensitive Object sensitive part that might be passed as encrypted parameter to TPM2_Create command or generated with KDFa from seed or primary seed (if sensitiveDataOrigin attribute is set) in case object is a symmetric key or a HMAC key. For RSA or ECC key, sensitive corresponds to the private key. Depending on object’s nature, sensitive is used as key for:  en/decryption (RSA, AES), decryption (Triple-DES)  signature generation (RSA, ECDSA, HMAC)  secret value exchange (ECDH) Available key lengths correspond to the ones listed in Table 9: Approved algorithms (Key nature and length are selected by user thanks to the interface of the keys creation commands). TPM2_Clear (owner & endorsement) TPM2_Change PPS (platform) TPM2_Change EPS (endorsement) NV Indexes 24 authValue 0 to 32 bytes authorization data defined during NV index creation (TPM2_DefineSpace) used to authorize commands based on this object. Value can be changed with command TPM2_NV_ChangeAuth. It is used as:  HMAC and/or KDFa keys or part of keys in authorization session based on HMAC or password.  Secret value extended into policyDigest on TPM2_PolicySecret command TPM2_NV_Und efineSpace / TPM2_NV_Und efineSpaceSpec ial 25 authPolicy 0 to 32 bytes authorization data defined during object creation (TPM2_DefineSpace) used to authorize commands based on this object. It is used as reference value for a comparison in case of policy session TPM2_NV_Und efineSpace / TPM2_NV_Und efineSpaceSpec ial Sessions 26 salt Value passed encrypted (with a loaded decrypt key) to TPM2_StartAuthSession. It is used as:  Part of KDFa key to generate the sessionKey (cf. [TPM2.0 Part1 r1.16] §19.6) Transient value only available during TPM2_StartAut hSession processing 27 sessionKey Key generated by KDFa (cf. [TPM2.0 Part1 r1.16] §19.6) and whose value depends on salt and bind parameters of TPM2_StartAuthSession command (size depends on symmetric algorithm used). It is used as:  HMAC key used to generate and verify command authorization  Part of KDFa key used to generate encryption key and IV of encryption- based session TPM2_FlushCo ntext 28 encryption key and IV of encryption-based session Symmetric key and IV generated by KDFa (cf. [TPM2.0 Part1 r1.16] §21.3) from sessionKey and object’s authValue. It is used as key and IV for:  Symmetric en/decryption of first parameter of command/response if parameter structure is of type TPM2B_ TPM2_FlushCo ntext Context 29 contextKey 16 bytes randomly generated by HDRBG at each TPM reset. It is used as:  1st part of key used in KDFa to generate a symmetric encryption key and IV used in context blob en/decryption. TPM reset FIPS140-2 SECURITY POLICY Page 26 of 47 NON-PROPRIETARY DOCUMENT 30 symKey, IV 2*16 bytes derived from the concatenation of contextKey and one of the proof (CSP 5, 6, 7, 8). It is used as key and IV for:  Symmetric en/decryption of context blob Transient value only available during TPM2_ContextS ave / TPM2_ContextL oad processing Duplication 31 inner symKey Symmetric key passed as input to duplication commands or generated by HDRBG (size depends on symmetric algorithm used). It is used as:  Symmetric en/decryption key to protect TPM2B_PRIVATE output structure Transient value only available during command processing 32 seed 32 bytes value randomly generated by HDRBG if new parent is a RSA key or via KDFe if new parent is an ECC key. It is used as key for :  KDFa to generate a symmetric en/decryption key for outer protection  KDFa to generate a HMAC key for outer integrity protection 33 outer symKey Symmetric key generated via KDFa from seed. It is used as key for:  Symmetric en/decryption key for outer protection of TPM2B_PRIVATE output structure 34 outer hmacKey HMAC key generated via KDFa from seed. It is used as key for:  HMAC integrity key for outer protection of TPM2B_PRIVATE output structure Credential 35 seed 32 bytes value randomly generated by HDRBG if new parent is a RSA key or via KDFe if new parent is an ECC key. It is used as key for :  KDFa to generate a symmetric en/decryption key for outer protection  KDFa to generate a HMAC key for outer integrity protection Transient value only available during command processing 36 symKey Symmetric key generated via KDFa from seed. It is used as key for:  Symmetric en/decryption key for outer protection of credentialBlob 37 hmacKey HMAC key generated via KDFa from seed. It is used as key for:  HMAC integrity key for outer protection of credentialBlob DRBG 38 DRBG state Internal state (V and C secret values) of the HDRBG (based on SHA256) stored in RAM. TPM2_Clear ECC 39 commitNonce 32 bytes value randomly generated by HDRBG at each TPM2_Startup (CLEAR). It is used as key for :  KDFa to generate an ECC ephemeral private key used in TPM2_EC_Ephemeral command / TPM2_ZGen_2Phase Transient value only available during command processing 40 ephemeral key – derived from commitNonce ECC private key (size depends on curve selected) generated with KDFa from commitNonce. It is used as ephemeral private key in:  TPM2_Ephemeral command (scalar multiplication) to generate the associated ephemeral public key  TPM2_Zgen_2Phase (ECDH scheme) to generate outZ2 (output point) 41 ephemeral key ECC private key (size depends on curve selected) generated with HDRBG. It is used as ephemeral private key in:  TPM2_ECDH_KeyGen command (ECDH scheme) to generate zPoint (output point) FIPS140-2 SECURITY POLICY Page 27 of 47 NON-PROPRIETARY DOCUMENT Primary keys 42 Endorsement key - RSA primes 2 primes of 1024 bits used to construct EK if parameters in TPM2_CreatePrimary command match the default EK RSA template. Generated by FIPS140-2 compliant HSM. TPM2_Change EPS 43 Endorsement key - ECC private key ECC 256 bits private key used to construct EK if parameters in TPM2_CreatePrimary command match the default EK ECC template. Generated by FIPS140-2 compliant HSM. TPM2_Change EPS Field upgrade keys 44 Field upgrade verification key 2048 bits permanent RSA key unique per TPM product line. Only public part of the key is stored in the TPM (modulus, exponent). No (public key) Transient DRBG 47 Transient DRBG state Internal state (V and C secret values) of a HDRBG instance (based on SHA256) stored in RAM. HDRBG is instantiated from primary seeds and used only in TPM2_CreatePrimary to generate prime numbers for primary RSA keys. Transient DRBG state cleared at the end of random numbers generation DRBG input seed 48 DRBG input seed 48-bytes value output from a NDRNG. Transient value FIPS140-2 SECURITY POLICY Page 28 of 47 NON-PROPRIETARY DOCUMENT 3.2 Services Next table lists all services supported by the TPM and indicates for each service, the role that can use this service and the keys/CSPs that can be accessed. 3.2.1 Services list Table 18: Command support table Services Role Keys and CSP access W = write, O = output, Z = zeroize C = used as key in cryptographic operation R = read (and not used as C) Authorized in limited approved mode Start-up 1 _TPM_Init NA W (first boot only) : 2, 3, 4, 6, 7, 8, 10, 11, 12, 14, 15, 16 W : 29, 38, 48 X 2 TPM2_Startup NA W : 1, 5, 9, 13, 39 X 3 TPM2_Shutdown NA - X Testing 4 TPM2_SelfTest NA - X 5 TPM2_IncrementalSelfTest NA - X 6 TPM2_GetTestResult NA - X Session commands 7 TPM2_StartAuthSession NA W : 26, 27, 38, 48 C : 9, 10, 11, 12, 17, 24, 26, 28, 38, 48 8 TPM2_PolicyRestart NA - Objects commands 9 TPM2_Create U R : 18 W : 19, 20, 21, 22, 23, 28, 38, 48 C : 17, 19, 20, 21, 22, 27, 28, 38, 48 O : 20, 23 10 TPM2_Load U R : 18 W : 17, 18, 20, 21, 22, 23, 28, 38, 48 C : 17, 19, 20, 21, 22, 27, 28, 38, 48 11 TPM2_LoadExternal NA W : 17, 18, 20, 21, 22, 23, 28, 38, 48 C : 17, 19, 20, 21, 22, 27, 28, 38, 48 X 12 TPM2_ReadPublic NA R : 23 W : 28 C : 28 X 13 TPM2_ActivateCredential A, U R : 18, 23, 35 W : 28, 36, 37, 38, 48 C : 27, 28, 35, 36, 37, 38, 48 14 TPM2_MakeCredential NA R : 23 W : 28, 35, 36, 37 C : 28, 36, 37 O : 35 15 TPM2_Unseal U R : 18, 23 W : 28, 38, 48 C : 27, 28, 38, 48 O : 23 FIPS140-2 SECURITY POLICY Page 29 of 47 NON-PROPRIETARY DOCUMENT Services Role Keys and CSP access W = write, O = output, Z = zeroize C = used as key in cryptographic operation R = read (and not used as C) Authorized in limited approved mode 16 TPM2_ObjectChangeAuth A R : 18 W : 17, 28, 38, 48 C : 27, 28, 38, 48 Duplication commands 17 TPM2_Duplicate D R : 18 W : 28, 31, 32, 33, 34, 38, 48 C : 27, 28, 31, 32, 33, 34, 38, 48 O : 23, 31, 32 18 TPM2_Rewrap U R : 18, 32 W : 28, 31, 32, 33, 34, 38, 48 C : 27, 28, 31, 32, 33, 34, 38, 48 O : 23, 31, 32 19 TPM2_Import U R : 18, 32 W : 28, 31, 33, 34, 38, 48 C : 27, 28, 31, 32, 33, 34, 38, 48 O : 23 Asymmetric primitives 20 TPM2_RSA_Encrypt NA C: 28 21 TPM2_RSA_Decrypt U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 48 22 TPM2_ECDH_KeyGen NA W : 28, 41 C : 28, 41 23 TPM2_ECDH_ZGen U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 48 24 TPM2_ECC_Parameters NA - X 25 TPM2_ZGen_2Phase U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 40, 48 Symmetric primitives 26 TPM2_EncryptDecrypt U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 48 27 TPM2_Hash NA W: 28 C: 28 28 TPM2_HMAC U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 48 Random number generator 29 TPM2_GetRandom NA C : 28, 38, 48 X 30 TPM2_StirRandom NA W : 28, 38, 48 C: 28 X Hash/HMAC/Event sequences FIPS140-2 SECURITY POLICY Page 30 of 47 NON-PROPRIETARY DOCUMENT Services Role Keys and CSP access W = write, O = output, Z = zeroize C = used as key in cryptographic operation R = read (and not used as C) Authorized in limited approved mode 31 TPM2_HMAC_Start U R : 18 W : 17, 28, 38, 48 C : 23, 27, 28, 38, 48 32 TPM2_HashSequenceStart NA W: 17, 28 C: 28 X 33 TPM2_SequenceUpdate U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 48 34 TPM2_SequenceComplete U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 48 35 TPM2_EventSequenceComplete U R : 18 W : 28, 38, 48 C : 23, 27, 28, 38, 48 Attestation commands 36 TPM2_Certify A, U R : 18 W : 28, 38, 48 C : 8, 23, 27, 28, 38, 48 37 TPM2_CertifyCreation U R : 18 W : 28, 38, 48 C : 8, 23, 27, 28, 38, 48 38 TPM2_Quote U R : 18 W : 28, 38, 48 C : 8, 23, 27, 28, 38, 48 39 TPM2_GetSessionAuditDigest CO R : 18 W : 28, 38, 48 C : 8, 23, 27, 28, 38, 48 40 TPM2_GetCommandAuditDigest CO R : 18 W : 28, 38, 48 C : 8, 23, 27, 28, 38, 48 41 TPM2_GetTime CO R : 18 W : 28, 38, 48 C : 8, 23, 27, 28, 38, 48 Ephemeral EC keys 43 TPM2_EC_Ephemeral NA W : 28, 40 C : 28, 39 Signing and signature verification 44 TPM2_VerifySignature NA R : 23 W : 28 C : 5, 6, 7, 8, 28 45 TPM2_Sign U R : 18 W : 28, 38, 48 C : 5, 6, 7, 8, 23, 27, 28, 38, 48 Command audit FIPS140-2 SECURITY POLICY Page 31 of 47 NON-PROPRIETARY DOCUMENT Services Role Keys and CSP access W = write, O = output, Z = zeroize C = used as key in cryptographic operation R = read (and not used as C) Authorized in limited approved mode 46 TPM2_SetCommandCodeAuditStat us CO R : 13, 18 C : 9, 11, 15, 27 Integrity collection (PCR) 47 TPM2_PCR_Extend U R : 18 C : 27 48 TPM2_PCR_Event U R : 18 W : 28, 38, 48 C : 27, 28, 38 49 TPM2_PCR_Read NA - X 50 TPM2_PCR_Allocate CO R : 13, 18 C : 9, 27 53 TPM2_PCR_Reset NA - 54 _TPM_Hash_Start NA - X 55 _TPM_Hash_Data NA - X 56 _TPM_Hash_End NA - X Enhanced authorization commands 57 TPM2_PolicySigned NA C: 28 58 TPM2_PolicySecret U R : 18 W : 28, 38, 48 C : 9, 10, 11, 12, 17, 24, 27, 28, 38, 48 59 TPM2_PolicyTicket NA W : 28 C: 28 60 TPM2_PolicyOR NA - 61 TPM2_PolicyPCR NA W : 28 C: 28 62 TPM2_PolicyLocality NA - 63 TPM2_PolicyNV U R : 18 W : 28 C : 27, 28 64 TPM2_PolicyCounterTimer NA W : 28 C: 28 65 TPM2_PolicyCommandCode NA - 66 TPM2_PolicyPhysicalPresence NA - 67 TPM2_PolicyCpHash NA W : 28 C: 28 68 TPM2_PolicyNameHash NA W : 28 C: 28 69 TPM2_PolicyDuplicationSelect NA W : 28 C: 28 70 TPM2_PolicyAuthorize NA W : 28 C: 28 71 TPM2_PolicyAuthValue NA - 72 TPM2_PolicyPassword NA - 73 TPM2_PolicyGetDigest NA W : 28 C: 28 74 TPM2_PolicyNvWritten NA - Hierarchy commands FIPS140-2 SECURITY POLICY Page 32 of 47 NON-PROPRIETARY DOCUMENT Services Role Keys and CSP access W = write, O = output, Z = zeroize C = used as key in cryptographic operation R = read (and not used as C) Authorized in limited approved mode 75 TPM2_CreatePrimary CO R : 13, 14, 15, 16, 18, 42, 43 W : 20, 21, 22, 23, 28, 38, 47, 48 C : 1, 2, 3, 4, 17, 19, 20, 21, 22, 27, 28, 38, 42, 43, 48 Z : 47 76 TPM2_HierarchyControl CO C : 9, 10, 11, 27 77 TPM2_SetPrimaryPolicy CO W : 13, 14, 15, 16, 28 C : 9, 10, 11, 12, 27, 28 78 TPM2_ChangePPS CO Z : 2, 6, 13,14, 17, 18, 20, 23, 43 79 TPM2_ChangeEPS CO Z : 3, 7, 10, 14, 17, 18, 20, 23, 42 80 TPM2_Clear CO R : 13, 16 W : 38, 48 Z : 4, 7, 8, 9, 10, 11, 12, 14, 15, 16, 17, 18, 20, 23, 24, 25, 38, 48 C : 38 81 TPM2_ClearControl CO R : 13, 16 W : 38, 48 C : 9, 12, 38, 48 82 TPM2_HierarchyChangeAuth CO R : 13, 16 W : 9, 10, 11, 12, 28, 38, 48 C : 9, 10, 11, 12, 28, 38, 48 Non-Volatile Storage 83 TPM2_DictionaryAttackLockReset CO R : 16 W : 38, 48 C : 12, 38, 48 84 TPM2_DictionaryAttackParameters CO R : 16 W : 38, 48 C : 12, 38, 48 Field Upgrade 86 TPM2_FieldUpgradeStart CO W : 28 C : 9, 13, 28, 44 87 TPM2_FieldUpgradeData NA - Context Management 88 TPM2_ContextSave NA W : 30 C : 5, 6, 7, 8, 29, 30 89 TPM2_ContextLoad NA W : 30 C : 5, 6, 7, 8, 29, 30 90 TPM2_FlushContext NA Z : 17, 18, 20, 23, 27, 28 X 91 TPM2_EvictControl CO R : 13, 15 C : 9, 11 Clock and Timers 92 TPM2_ReadClock NA - X FIPS140-2 SECURITY POLICY Page 33 of 47 NON-PROPRIETARY DOCUMENT Services Role Keys and CSP access W = write, O = output, Z = zeroize C = used as key in cryptographic operation R = read (and not used as C) Authorized in limited approved mode 93 TPM2_ClockSet CO R : 13, 15 C : 9, 11 94 TPM2_ClockRateAdjust CO R : 13, 15 C : 9, 11 Capability Commands 95 TPM2_GetCapability NA - X 96 TPM2_TestParms NA - X Non-volatile storage 97 TPM2_NV_DefineSpace CO R : 13, 15, 18 W : 24, 25, 28, 38, 48 C : 9, 11, 27, 28, 38, 48 98 TPM2_NV_UndefineSpace CO W : 38, 48 C : 27, 38, 48 Z : 24, 25 99 TPM2_NV_UndefineSpaceSpecial CO, A W : 38, 48 C : 27, 38, 48 Z : 24, 25 100 TPM2_NV_ReadPublic NA C: 28 X 101 TPM2_NV_Write U W : 28, 38, 48 R : 25 C : 27, 28, 38, 48 102 TPM2_NV_Increment U W : 38, 48 R : 25 C : 27, 38, 48 103 TPM2_NV_Extend U W : 28, 38, 48 R : 25 C : 27, 28, 38, 48 104 TPM2_NV_SetBits U W : 38, 48 R : 25 C : 27, 38, 48 105 TPM2_NV_WriteLock U W : 38, 48 R : 25 C : 27, 38, 48 106 TPM2_NV_GlobalWriteLock CO W : 38, 48 C : 27, 38, 48 107 TPM2_NV_Read U W : 28, 38, 48 R : 25 C : 27, 28, 38, 48 108 TPM2_NV_ReadLock U W : 38, 48 R : 25 C : 27, 38, 48 109 TPM2_NV_ChangeAuth A W : 24, 28, 38, 48 C : 27, 28, 38, 48 FIPS140-2 SECURITY POLICY Page 34 of 47 NON-PROPRIETARY DOCUMENT Services Role Keys and CSP access W = write, O = output, Z = zeroize C = used as key in cryptographic operation R = read (and not used as C) Authorized in limited approved mode 110 TPM2_NV_Certify U W : 28, 38, 48 R : 25 C : 27, 28, 38, 48 Proprietary commands 111 TPM2_SetMode CO W : 28, 38, 48 C : 27, 28, 38, 48 112 TPM2_SetCommandSet CO W : 28, 38, 48 C : 27, 28, 38, 48 113 TPM2_RestoreEK CO Z : 3, 7, 10, 14, 17, 18, 20 R : 42, 43 W : 23, 28, 38, 48 C : 27, 28, 38, 48 114 TPM2_SetCommandSetLock CO W : 28, 38, 48 C : 27, 28, 38, 48 Misc commands 115 TPM2_PP_Commands CO - Non FIPS services 116 Field upgrade de-obfuscation1 NA - 3.2.2 Authorization Some of the services listed above manipulate CSPs without requiring the operator to assume an authorized role:  Services restricted to use of SHS: TPM2_Hash, TPM2_HashSequenceStart  Services using DRNG (read, state update without manipulation): TPM2_GetRandom, TPM2_StirRandom  Services used for authentication mechanism: TPM2_StartAuthSession, TPM2_PolicySigned, TPM2_PolicyTicket, TPM2_PolicyPCR, TPM2_PolicyCounterTimer TPM2_PolicyLocality, TPM2_PolicyCpHash, TPM2_PolicyNameHash, TPM2_PolicyAuthorize, TPM2_PolicyAuthorize, TPM2_PolicyDuplicationSelect, TPM2_PolicyGetDigest  Services using (read, cryptographic operation) only public part of objects: TPM2_ReadPublic, TPM2_RSA_Encrypt, TPM2_NV_ReadPublic  Specific services that do not affect security of the module: TPM2_LoadExternal: loaded object not considered as protected object (specific attribute). TPM2_MakeCredential: convenience function that do not use TPM secrets. TPM2_ECDH_KeyGen: ephemeral ECC key generation 1 This service is not callable from TPM interface but is only used internally by TPM2_FieldUpgradeData command. It consists of de-obfuscating data received by the TPM2_FieldUpgradeData command with a non-FIPS approved algorithm. FIPS140-2 SECURITY POLICY Page 35 of 47 NON-PROPRIETARY DOCUMENT TPM2_EC_Ephemeral: ephemeral ECC key generation TPM2_FieldUpgradeData: transport command for field upgrade. Can be used only if TPM2_FieldUpgradeStart command has been successfully executed (authorized command) TPM2_ContextSave: save objects under an encrypted and integrity protected format TPM2_ContextLoad: load encrypted and integrity protected objects into TPM TPM2_FlushContext: flush loaded object/session from TPM volatile memory FIPS140-2 SECURITY POLICY Page 36 of 47 NON-PROPRIETARY DOCUMENT 3.3 Key management 3.3.1 Key entry and output Next table indicates the approved method used to encrypt all secret, private keys and data (indicated by S for secret value, P for private key and D for user defined data in type column), entered into or output from the cryptographic module. Table 19 : Encrypted methods for secret and private keys input Service Parameter name Type Input or output Encryption algorithm TPM2_ActivateCredential credentialBlob S Input AES CFB secret S Input RSA OAEP or ECDH TPM2_ContextSave context D Output AES CFB TPM2_ContextLoad context D Input AES CFB TPM2_Create inSensitive P / S Input AES CFB (*) outPrivate P / S Output AES CFB TPM2_CreatePrimary inSensitive P / S Input AES CFB (*) TPM2_Duplicate encryptionKeyIn (if present) S Input AES CFB (*) encryptionKeyOut S Output AES CFB (*) duplicate S Output AES CFB outSymSeed S Output RSA OAEP or ECDH TPM2_EventSequenceComplete buffer D Input AES CFB (*) TPM2_GetRandom randomBytes D Output AES CFB (**) TPM2_Hash data D Input AES CFB (*) TPM2_HashSequenceStart auth S Input AES CFB (*) TPM2_HierarchyChangeAuth newAuth S Input AES CFB (*) TPM2_HMAC buffer D Input AES CFB (*) TPM2_HMACStart auth S Input AES CFB (*) TPM2_Import encryptionKeyIn (if present) S Input AES CFB (*) duplicate S Input AES CFB inSymSeed S Input RSA OAEP or ECDH outPrivate S Output AES CFB TPM2_Load inPrivate P / S Input AES CFB TPM2_LoadExternal inPrivate P / S Input AES CFB (*) TPM2_MakeCredential credentialBlob S Output AES CFB secret S Output RSA OAEP or ECDH TPM2_NV_ChangeAuth newAuth S Input AES CFB (*) TPM2_NV_DefineSpace auth S Input AES CFB (*) TPM2_NV_Extend data D Input AES CFB (*) FIPS140-2 SECURITY POLICY Page 37 of 47 NON-PROPRIETARY DOCUMENT TPM2_NV_Read data D Output AES CFB (**) TPM2_NV_Write data D Input AES CFB (*) TPM2_ObjectChangeAuth newAuth S Input AES CFB (*) outPrivate S Output AES CFB TPM2_PCR_Event eventData D Input AES CFB (*) TPM2_Rewrap inDuplicate S Input AES CFB inSymSeed S Input RSA OAEP or ECDH outDuplicate S Output AES CFB outSymSeed S Output RSA OAEP or ECDH TPM2_RSA_Decrypt message D Output AES CFB (**) TPM2_RSA_Encrypt message D Input AES CFB (*) TPM2_SequenceComplete buffer D Input AES CFB (*) TPM2_SequenceUpdate buffer D Input AES CFB (*) TPM2_SetPrimaryPolicy authPolicy S Input AES CFB (*) TPM2_StirRandom inData D Input AES CFB (*) TPM2_Unseal outData D Output AES CFB (**) TPM2_EncryptDecrypt outData D Output AES CFB (**) (*): Parameter decryption is ensured by use of a decryption session (attribute DECRYPT set) (**): Parameter encryption is ensured by use of an encryption session (attribute ENCRYPT set). This is mandatory if output data is a CSP. 3.3.2 Key transport Relative security strength has been calculated for each cryptographic algorithm supported by the module and used for key transport. TPM FW prevents use of key in a transport scheme with lower strength than the transported key. Table 20: Cryptographic Functions Algorithm Comparable number of bits of security RSA OAEP (2048 bits) 112 ECDH (P-224 curve) 112 ECDH (P-256 curve) 128 AES CFB (128 bits)1 128 AES CFB (256 bits)2 256 1 AES is used in conjunction with HMAC approved authentication method ([SP800-38F] compliant) 2 AES is used in conjunction with HMAC approved authentication method ([SP800-38F] compliant) FIPS140-2 SECURITY POLICY Page 38 of 47 NON-PROPRIETARY DOCUMENT 4 SELF-TESTS Self-tests run by the cryptographic module are split in three categories:  Power-up self-tests  Full self-tests  Conditional self-tests The power-on self-tests do not require operator intervention in order to run. Power-on self- tests execution completes all tests except KATs on asymmetric algorithms (RSA, ECDSA, ECDH). Completion of power-on self-tests allows the TPM to be in a limited approved mode allowing to process only a subset of TPM commands (see §1.7.2.1). To switch from limited approved mode to full approved mode, operator shall execute TPM_SelfTestFull command. This command requests the module to switch mode by executing all self-tests listed in Table 22 : Asymmetric cryptography self-tests list (power-up self-tests plus the remaining self-tests, that mainly concern asymmetric cryptography). The security module outputs an “error” Return Code via the status interface when the error state is entered due to a failed self-test. While in error state, security module does not perform any cryptographic functions and all data output via the data output interface are inhibited. If power-on self-tests have passed successfully, no status is indicated but commands that require self-tests to be completed can be successfully executed. 4.1 Power-up tests list Table 21 : Power-up self-tests list Algorithm tested Test description SHA1 SHA1 computation on known data (16 bytes) and comparison of output to the expected digest (20 bytes) SHA256 SHA256 computation on known data (16 bytes) and comparison of output to the expected digest (32 bytes) HMAC SHA256 HMAC-SHA256 computation on known data (16 bytes) / known key (16 bytes, same value as data) and comparison of output to the expected MAC (32 bytes). Self-test allows validating the secure SHA algorithm also used in standalone (out of HMAC context). KDF SP800- 108 KDF (based on SHA1) computation on known data (16 bytes) / known label (“TEST”) and comparison of output to the expected value (32 bytes). Hash- DRBG Instantiate, Generate and Reseed API are tested in a single test sequence in accordance with §11.3 of [SP800-90A]. Output of HDRBG (55 bytes) is compared to a reference value. AES AES CFB encryption is done on known data (32 bytes) / known key (16 bytes) and known IV (16 bytes, same value as key). The 32 bytes output data are compared to the expected reference data. If comparison succeeds, AES CFB decryption is done on encrypted data with same key & same IV as encryption. 32 bytes output are compared to the initial plaintext data. Triple-DES Triple-DES CFB encryption is done on known data (32 bytes) / known key (24 bytes) and known IV (8 bytes). The 32 bytes output data are compared to the expected reference data. If comparison succeeds, Triple-DES CFB decryption is done on encrypted data with same key & same IV as encryption. 32 bytes output are compared to the initial plaintext data. FIPS140-2 SECURITY POLICY Page 39 of 47 NON-PROPRIETARY DOCUMENT FW integrity FW integrity is verified by computing an EDC (CRC-16 ISO 13239) and comparing it to reference values. FW integrity is verified during boot sequence before execution of one of the code block (CML, AFL and TPM) and during full self-tests execution. If failure is detected during boot sequence, TPM enters an infinite reset loop that can be exit only by power-off/power-on sequence. In failure is detected during self-tests, status is set to FAIL and error is returned. HW integrity HW integrity is guaranteed via check of HW sensors. If failure is detected during boot sequence, status is set to FAIL and error is returned. 4.2 Asymmetric cryptography self-tests list Table 22 : Asymmetric cryptography self-tests list Algorithm tested Test description RSA A known key is loaded (2048 bits length). Signature RSASSA-PKCS1-v1_5 is generated on known data (20 bytes). Output of signature is compared to a reference signature. Signature verification is performed on the generated signature. ECDH A known private key d (32 bytes length) is used with a known point P of NIST P-256 curve to compute P = dQ. Q is compare to known reference point. ECDSA A known private key (256 bits) is used to generate ECDSA signature based on NIST P- 256 curve. Output of signature is compared to a reference signature. Signature verification is performed on the generated signature. 4.3 Conditional tests list Table 23 : TPM conditional tests Algorithm tested Test description FW integrity FW integrity is verified by computing an EDC (CRC-16 ISO 13239) and comparing it to reference values. Hash-DRBG Each 32 bytes of generated data are compared to the previous generated data. If data are equal, status is set to FAIL and error is returned. NDRNG TPM performs AIS31 statistical test verification on NDRNG output and continuous HW self-tests (AS09.42) on NDRNG 48-bits output sequence. If test fails, TRNG_ERR bit is raised in SEC_STAT register. Status is set to FAIL and error is returned. FW load During field upgrade procedure, several checks are performed before authorizing the FW to be upgraded: - Verification of signature (RSASSA-PSS) on the first data blob to ensure authentication of the FW - Verification of digest (SHA256) on each subsequent blob to guarantee integrity of the full FW. RSA key generation A new RSA key is generated or retrieved from pre-computed keys (done in BKG). Depending on the key purpose (signing or encrypting) indicated in sign attribute of the key, en/decryption or signing/verification is done on known data (16 bytes). ECC key generation On each ECC key generation, an ECDSA signature is generated and verified on curve NIST P-256. FIPS140-2 SECURITY POLICY Page 40 of 47 NON-PROPRIETARY DOCUMENT 4.4 Verification Successful completion of self-tests can be verified through use of TPM2_GetTestResult command. The first 4 bytes of response indicate self-tests status. If they are equal to 0, self- tests completed successfully. If not, the subsequent 4 bytes indicate the list of algorithms not fully self-tested. FIPS140-2 SECURITY POLICY Page 41 of 47 NON-PROPRIETARY DOCUMENT 5 PHYSICAL SECURITY POLICY The security module meets Physical Security protection requirements for FIPS level 2. CSPs are physically protected from unexpected disclosure and modification. Security module is tamper evident, encapsulated in an opaque package. Regular visual inspection must be conducted by user to check that HW integrity of the chip has not been damaged. Some physical security protection mechanisms beyond the requirements for level 2 have been implemented and are described in “Mitigations of other attacks”. Normal operating ranges are defined in the respective TOE datasheet [ST33TPHF2ESPI DS] / [ST33TPHF20SPI DS] / [ST33TPHF2EI2C DS] / [ST33TPHF20I2C DS]:  Temperature: The normal operating temperature range of the security module is -40°C to +105°C.  Voltage: The normal operating voltage range of the security module is 1.8V or 3.3V (±10%).  Frequency: The internal system clock is created by an internal oscillator. Operation outside these ranges is not guaranteed, but physical security mechanisms are implemented to assure that CSPs remain protected from unauthorized disclosure, usage, modification or deletion. FIPS140-2 SECURITY POLICY Page 42 of 47 NON-PROPRIETARY DOCUMENT 6 OPERATIONAL ENVIRONMENT Module operational environment is “limited modifiable” because TPM FW can only be modified through field upgrade service (use of TPM2_FieldUpgradeStart and TPM2_FieldUpgradeData commands). The Non-upgradable code blocks are non-modifiable. FIPS 140-2 level 1 & 2 operational environment requirements of [FIPS 140-2] section 4.6.1 are then not applicable to the security module. New firmware versions within the scope of this validation must be validated through the FIPS 140-2 CMVP. Any other firmware loaded into this module is out of the scope of this validation and require a separate FIPS 140-2 validation. FIPS140-2 SECURITY POLICY Page 43 of 47 NON-PROPRIETARY DOCUMENT 7 MITIGATIONS OF OTHER ATTACKS The security module meets Physical Security protection requirements for FIPS level 2. 7.1 Internal Tamper Detection The security module contains an active metal shield that covers the internal TPM circuitry and memory components. Cutting, removing or modifying the shield layer will cause the TPM to Reset and enter a SHUTDOWN mode. 7.2 Environmental protection The security module contains circuitry which will detect environmental conditions outside the range described in the product datasheet. Power supply voltage is continuously monitored. If conditions exist outside the range determined by the TPM tamper detection circuitry, the chip will reset and will enter a FAILURE mode. The chip will remain Reset and in FAIL mode as long as the environmental condition causing the tamper event persists. FIPS140-2 SECURITY POLICY Page 44 of 47 NON-PROPRIETARY DOCUMENT 8 REFERENCES Reference Document [ST33TPHF20SPI DS] ST33TPHF20SPI Datasheet, STMicroelectronics, May 2017 [ST33TPHF20I2C DS] ST33TPHF20I2C Datasheet, STMicroelectronics, May 2017 [ST33TPHF2ESPI DS] ST33TPHF2ESPI Datasheet, STMicroelectronics, April 2017 [ST33TPHF2EI2C DS] ST33TPHF2EI2C Datasheet, STMicroelectronics, May 2017 [TPM2.0 Part1 r1.16] TPM2.0 Main, Part 1, Architecture, rev 1.16, TCG [TPM2.0 Part2 r1.16] TPM2.0 Main, Part 2, Structures, rev 1.16, TCG [TPM2.0 Part3 r1.16] TPM2.0 Main, Part 3, Commands, rev 1.16, TCG [TPM2.0 Part4 r1.16] TPM2.0 Main, Part 4, Supporting routines, rev 1.16, TCG [PTP 0.43] TCG PC Client Platform TPM Profile (PTP) Specification, rev. 00.43 with errata [FIPS 140-2] FIPS PUB 140-2, Security Requirements for Cryptographic Modules / National Institute of Standards and Technology (NIST), CHANGE NOTICES (12-03-2002) [FIPS DTR] National Institute of Standards and Technology and Communications Security, Derived Test Requirements(DTR) for FIPS PUB 140-2, Security Requirements for Cryptographic Modules [FIPS IG] National Institute of Standards and Technology and Communications Security, Implementation Guidance for FIPS PUB 140-2 and the Cryptographic Module Validation Program [FIPS 180-4] National Institute of Standards and Technology, Secure Hash Standard, Federal Information Processing Standards Publication 180-4, March 2012 [FIPS 186-4] National Institute of Standards and Technology, Digital Signature Standard (DSS), Federal Information Processing Standards Publication 186-4, July 2013 [FIPS 197] National Institute of Standards and Technology, Advanced Encryption Standard (AES), Federal Information Processing Standards Publication 197, November 2001 [SP800-135] National Institute of Standards and Technology, Existing Application- Specific Key Derivation Function Validation System, September 2015. [SP800-108] National Institute of Standards and Technology, Recommendation for Key Derivation Using Pseudorandom Functions, October 2009. [SP800-131A] National Institute of Standards and Technology, Transitions: Recommendation for Transitioning the Use of Cryptographic Algorithms and Key Lengths, 11/06/15. FIPS140-2 SECURITY POLICY Page 45 of 47 NON-PROPRIETARY DOCUMENT Reference Document [FIPS 198-1] National Institute of Standards and Technology, The Keyed-Hash Message Authentication Code, NIST Computer Security Division Page 3 07/26/2011, (HMAC), Federal Information Processing Standards Publication 198-1, July, 2008 [SP800-90A] National Institute of Standards and Technology, Recommendation for Random Number Generation Using Deterministic Random Bit Generators, January 2012. [SP800-38F] National Institute of Standards and Technology, Recommendation for Block Cipher Modes of Operation: Methods for Key Wrapping, December 2012. [SP800-56A] Rev 3 National Institute of Standards and Technology, Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography, April 2018. [SP800-56B] National Institute of Standards and Technology, Recommendation for Pair-Wise Key-Establishment Using Integer Factorization Cryptography, August 2009 [SP800-56C] Rev 1 National Institute of Standards and Technology, Recommendation for Key-Derivation Methods in Key-Establishment Schemes, April 2018 [SP800-67] National Institute of Standards and Technology, Recommendation for the Triple Data Encryption Algorithm (TDEA) Block Cipher, January 2012. [FIPS 140-2 TPM] TCG FIPS 140-2 Guidance for TPM2.0, v1.0, TCG FIPS140-2 SECURITY POLICY Page 46 of 47 NON-PROPRIETARY DOCUMENT 9 ACRONYMS Term Definition AES Advanced Encryption Standard CO Crypto Officer DES Data Encryption Standard DSAP Delegate Specific Authorization Protocol EK Endorsement Key FIPS Federal Information Processing Standard FUM Field Upgrade Mode GPIO General Purpose I/O HMAC Keyed-Hashing for Message Authentication NIST National Institute of Standards and Technology NV Non-volatile (memory) OIAP Object-Independent Authorization Protocol OSAP Object Specific Authorization Protocol PCR Platform Configuration Register RSA Rivest Shamir Adelman RTM Root of Trust for Measurement RTR Root of Trust for Reporting SHA Secure Hash Algorithm SPI Serial Peripheral Interface SRK Storage Root Key TCG Trusted Computed Group TPM Trusted Platform Module TSS TPM Software Stack FIPS140-2 SECURITY POLICY Page 47 of 47 NON-PROPRIETARY DOCUMENT IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2020 STMicroelectronics - All rights reserved www.st.com